The number of LPM trees available for lookup is much smaller than the
number of virtual routers, which are used to implement VRFs. In
addition, an LPM tree can only be used by one protocol - either IPv4 or
IPv6.

Therefore, in order to increase the number of supported virtual routers
to the maximum we need to be able to share LPM trees across virtual
routers instead of trying to find an optimized tree for each.

Do that by allocating one LPM tree for each protocol, but make sure it
will only include prefixes that are actually used, so as to not perform
unnecessary lookups.

Since changing the structure of a bound tree isn't recommended, whenever
a new tree it required, it's first created and then bound to each
virtual router, replacing the old one.

Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Instead of relying on the LPM tree to be assigned to the virtual router
before binding the two, lets pass it explicitly.

This will later allow us to return upon binding error instead of having
to perform a rollback of the assignment.

Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

There is no point in returning a value from function whose return value
is never checked.

Even if the return value was checked, there wouldn't be anything to do
about it, as these functions are either called from error or deletion
paths.

Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Refactor code in order to avoid identical code for different branches.

This issue was detected with the help of Coccinelle.

Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Refactor code in order to avoid identical code for different branches.

This issue was detected with the help of Coccinelle.

Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Acked-by: Felix Manlunas <felix.manlunas@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

- remove logging dependency upon global func octeon_console_debug_enabled()
- abstract debug console logging using console structure (via function ptr)
  to allow for more flexible logging

Signed-off-by: Rick Farrington <ricardo.farrington@cavium.com>
Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@cavium.com>
Signed-off-by: Felix Manlunas <felix.manlunas@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

platform_device_id are not supposed to change at runtime. All functions
working with platform_device_id provided by <linux/platform_device.h>
work with const platform_device_id. So mark the non-const structs as
const.

Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

platform_device_id are not supposed to change at runtime. All functions
working with platform_device_id provided by <linux/platform_device.h>
work with const platform_device_id. So mark the non-const structs as
const.

Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

platform_device_id are not supposed to change at runtime. All functions
working with platform_device_id provided by <linux/platform_device.h>
work with const platform_device_id. So mark the non-const structs as
const.

Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

platform_device_id are not supposed to change at runtime. All functions
working with platform_device_id provided by <linux/platform_device.h>
work with const platform_device_id. So mark the non-const structs as
const.

Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The structure tap_fops is local to the source and does not need to
be in global scope, so make it static.

Cleans up sparse warning:
symbol 'tap_fops' was not declared. Should it be static?

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The array guest_offloads is local to the source and does not need to
be in global scope, so make it static. Also tweak formatting.

Cleans up sparse warnings:
symbol 'guest_offloads' was not declared. Should it be static?

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Looks  like gcc isn't always able to figure  out that 3 *if* branches in
of_phy_register_fixed_link() calling fixed_phy_register() at their ends
are similar enough and thus can be merged. The "manual" merge saves 40
bytes of the object code (AArch64 gcc 4.8.5), and still saves 12 bytes
even  if gcc was able to merge the branch tails (ARM gcc 4.8.5)...

Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

David Ahern says:

====================
net: vrf: Support for local traffic with sockets bound to enslaved devices

This set gets local traffic working for sockets bound to enslaved
devices. The local rtable and rt6_info added in June 2016 to get
local traffic in VRFs working is no longer needed and actually
keeps local traffic for sockets bound to an enslaved device from
working. Patch 1 removes them.

Patch 2 adds a fix up for IPv4 IP_PKTINFO to return rt_iif for
packets sent over the VRF device. This is similar to the handling
of loopback.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

Similar to the loopback device, for packets sent through a VRF device
the index returned in ipi_ifindex needs to be the saved index in
rt_iif.

Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The VRF cached rtable and rt6_info for local traffic are no longer
needed and actually prevent local traffic through enslaved devices.
Remove them.

Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

rt_iif is going to be set to either 0 or orig_oif. If orig_oif
is 0 it amounts to the same end result so remove the check.

Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The kernel log is not where users expect error messages for netlink
requests; as we have extended acks now, we can replace pr_debug() with
NL_SET_ERR_MSG_ATTR().

Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
Signed-off-by: Girish Moodalbail <girish.moodalbail@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Jason Wang says:

====================
XDP support for tap

This series tries to implement XDP support for tap. Two path were
implemented:

- fast path: small & non-gso packet, For performance reason we do it
  at page level and use build_skb() to create skb if necessary.
- slow path: big or gso packet, we don't want to lose the capability
  compared to generic XDP, so we export some generic xdp helpers and
  do it after skb was created.

xdp1 shows about 41% improvement, xdp_redirect shows about 60%
improvement.

Changes from V1:
- fix the race between xdp set and free
- don't hold extra refcount
- add XDP_REDIRECT support

Please review.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

This patch tries to implement XDP for tun. The implementation was
split into two parts:

- fast path: small and no gso packet. We try to do XDP at page level
  before build_skb(). For XDP_TX, since creating/destroying queues
  were completely under control of userspace, it was implemented
  through generic XDP helper after skb has been built. This could be
  optimized in the future.
- slow path: big or gso packet. We try to do it after skb was created
  through generic XDP helpers.

Test were done through pktgen with small packets.

xdp1 test shows ~41.1% improvement:

Before: ~1.7Mpps
After:  ~2.3Mpps

xdp_redirect to ixgbe shows ~60% improvement:

Before: ~0.8Mpps
After:  ~1.38Mpps

Suggested-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch tries to export some generic xdp helpers to drivers. This
can let driver to do XDP for a specific skb. This is useful for the
case when the packet is hard to be processed at page level directly
(e.g jumbo/GSO frame).

With this patch, there's no need for driver to forbid the XDP set when
configuration is not suitable. Instead, it can defer the XDP for
packets that is hard to be processed directly after skb is created.

Signed-off-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

We use tun_alloc_skb() which calls sock_alloc_send_pskb() to allocate
skb in the past. This socket based method is not suitable for high
speed userspace like virtualization which usually:

- ignore sk_sndbuf (INT_MAX) and expect to receive the packet as fast as
  possible
- don't want to be block at sendmsg()

To eliminate the above overheads, this patch tries to use build_skb()
for small packet. We will do this only when the following conditions
are all met:

- TAP instead of TUN
- sk_sndbuf is INT_MAX
- caller don't want to be blocked
- zerocopy is not used
- packet size is smaller enough to use build_skb()

Pktgen from guest to host shows ~11% improvement for rx pps of tap:

Before: ~1.70Mpps
After : ~1.88Mpps

What's more important, this makes it possible to implement XDP for tap
before creating skbs.

Signed-off-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Calls to rtnl_dump_ifinfo() are protected by RTNL lock. So are the
{list,unlist}_netdevice() calls where we bump the net->dev_base_seq
number.

For this reason net->dev_base_seq can't change under out feet while
we're looping over links in rtnl_dump_ifinfo(). So move the check for
net->dev_base_seq change (since the last time we were called) out of the
loop.

This way we avoid giving a wrong impression that there are concurrent
updates to the link list going on while we're iterating over them.

Signed-off-by: Jakub Sitnicki <jkbs@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

ptp_enable was a global static variable.  Moved this global variable to
octeon_device structure and removed extra device id check.

Signed-off-by: Intiyaz Basha <intiyaz.basha@cavium.com>
Signed-off-by: Felix Manlunas <felix.manlunas@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Kernel test robot reports error when running test_xdp_redirect.sh.
Check if ip tool supports xdpgeneric, if not, skip the test.

Signed-off-by: William Tu <u9012063@gmail.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Cc: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Make these structures const as they only stored in the profile field of
a mlxsw_driver structure, which is of type const.
Done using Coccinelle.

Signed-off-by: Bhumika Goyal <bhumirks@gmail.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

OVS_NLERR already adds a newline so these just add blank
lines to the logging.

Signed-off-by: Joe Perches <joe@perches.com>
Acked-by: Joe Stringer <joe@ovn.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

The firmware expects a MAC_REPR control message when a MAC representor
is created. The driver should expect a PORTMOD message to follow which
will provide the link states of the physical port associated with the MAC
representor.

Signed-off-by: Simon Horman <simon.horman@netronome.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Because we remove the UFO support, we will also remove the
CHECKSUM_UNNECESSARY check in skb_needs_check().

Cc: Willem de Bruijn <willemb@google.com>
Signed-off-by: Tonghao Zhang <xiangxia.m.yue@gmail.com>
Acked-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Make use the dma_*() interfaces rather than the pci_*() interfaces.

Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru>
Signed-off-by: David S. Miller <davem@davemloft.net>

The driver does not check if mapping dma memory succeed.
The patch adds the checks and failure handling.

Found by Linux Driver Verification project (linuxtesting.org).

Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru>
Signed-off-by: David S. Miller <davem@davemloft.net>

Attempts to connect to a local address with a socket bound
to a device with the local address hangs if there is no listener:

  $ ip addr sh dev eth1
  3: eth1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP group default qlen 1000
    link/ether 02:e0:f9:1c:00:37 brd ff:ff:ff:ff:ff:ff
    inet 10.100.1.4/24 scope global eth1
       valid_lft forever preferred_lft forever
    inet6 2001:db8:1::4/120 scope global
       valid_lft forever preferred_lft forever
    inet6 fe80::e0:f9ff:fe1c:37/64 scope link
       valid_lft forever preferred_lft forever

  $ vrf-test -I eth1 -r 10.100.1.4
  <hangs when there is no server>

(don't let the command name fool you; vrf-test works without vrfs.)

The problem is that the original intended device, eth1 in this case, is
lost when the tcp reset is sent, so the socket lookup does not find a
match for the reset and the connect attempt hangs. Fix by adjusting
orig_oif for local traffic to the device from the fib lookup result.

With this patch you get the more user friendly:
  $ vrf-test -I eth1 -r 10.100.1.4
  connect failed: 111: Connection refused

orig_oif is saved to the newly created rtable as rt_iif and when set
it is used as the dif for socket lookups. It is set based on flowi4_oif
passed in to ip_route_output_key_hash_rcu and will be set to either
the loopback device, an l3mdev device, nothing (flowi4_oif = 0 which
is the case in the example above) or a netdev index depending on the
lookup path. In each case, resetting orig_oif to the device in the fib
result for the RTN_LOCAL case allows the actual device to be preserved
as the skb tx and rx is done over the loopback or VRF device.

Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Implemented workarounds for the following dTSEC Erratum:
A002, A004, A0012, A0014, A004839 on several operations
that involve MAC CFG register changes: adjust link,
rx pause frames, modify MAC address.

Signed-off-by: Florinel Iordache <florinel.iordache@nxp.com>
Acked-by: Madalin Bucur <madalin.bucur@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

These were copy and paste bugs, but I believe they are harmless.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This function has a copy and paste bug so it accidentally calls the add
function instead of the delete function.

Fixes: 76ad4f0e

 ("net: hns3: Add support of HNS3 Ethernet Driver for hip08 SoC")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

David Wu says:

====================
rockchip: Add the integrated PHY support

The rk3228 and rk3328 support integrated PHY inside, let's enable
it to work. And the integrated PHY need to do some special setting,
so register the rockchip integrated PHY driver.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

Enable the gmac2phy, make the gmac2phy work on
the rk3328-evb board.

Signed-off-by: David Wu <david.wu@rock-chips.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The gmac2phy controller of rk3328 is connected to integrated PHY
directly inside, add the node for the integrated PHY support.

Signed-off-by: David Wu <david.wu@rock-chips.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch enables the integrated PHY for rk3228 evb board
by default.
To use the external 1000M PHY on evb board, need to make
some switch of evb board to be on.

Signed-off-by: David Wu <david.wu@rock-chips.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

There are two mac controllers in the rk3328, the one connects
to external PHY, and the other one connects to integrated PHY.
Like the mac of external PHY, the integrated PHY's mac also
needs to configure the related mac registers at GRF.

Signed-off-by: David Wu <david.wu@rock-chips.com>
Signed-off-by: David S. Miller <davem@davemloft.net>