This is preparatory work for send protocol update to version 2 and
higher.

We have many pending protocol update requests but still don't have the
basic protocol rev in place, the first thing that must happen is to do
the actual versioning support.

The protocol version is u32 and is a new member in the send ioctl
struct. Validity of the version field is backed by a new flag bit. Old
kernels would fail when a higher version is requested. Version protocol
0 will pick the highest supported version, BTRFS_SEND_STREAM_VERSION,
  that's also exported in sysfs.

The version is still unchanged and will be increased once we have new
incompatible commands or stream updates.

Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

Commit 95ea0486

 ("btrfs: allow read-write for 4K sectorsize on 64K
page size systems") added write support for 4K sectorsize on a 64K
systems. Fix the now stale comments.

Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

Christoph pointed out that I'm updating bdev->bd_inode for the device
time when we remove block devices from a btrfs file system, however this
isn't actually exposed to anything.  The inode we want to update is the
one that's associated with the path to the device, usually on devtmpfs,
so that blkid notices the difference.

We still don't want to do the blkdev_open, so use kern_path() to get the
path to the given device and do the update time on that inode.

Fixes: 8f96a5bf

 ("btrfs: update the bdev time directly when closing")
Reported-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>

If you already have an inode and need to update the time on the inode
there is no way to do this properly.  Export this helper to allow file
systems to update time on the inode so the appropriate handler is
called, either ->update_time or generic_update_time.

Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

Attempting to defragment a Btrfs file containing a transparent huge page
immediately deadlocks with the following stack trace:

  #0  context_switch (kernel/sched/core.c:4940:2)
  #1  __schedule (kernel/sched/core.c:6287:8)
  #2  schedule (kernel/sched/core.c:6366:3)
  #3  io_schedule (kernel/sched/core.c:8389:2)
  #4  wait_on_page_bit_common (mm/filemap.c:1356:4)
  #5  __lock_page (mm/filemap.c:1648:2)
  #6  lock_page (./include/linux/pagemap.h:625:3)
  #7  pagecache_get_page (mm/filemap.c:1910:4)
  #8  find_or_create_page (./include/linux/pagemap.h:420:9)
  #9  defrag_prepare_one_page (fs/btrfs/ioctl.c:1068:9)
  #10 defrag_one_range (fs/btrfs/ioctl.c:1326:14)
  #11 defrag_one_cluster (fs/btrfs/ioctl.c:1421:9)
  #12 btrfs_defrag_file (fs/btrfs/ioctl.c:1523:9)
  #13 btrfs_ioctl_defrag (fs/btrfs/ioctl.c:3117:9)
  #14 btrfs_ioctl (fs/btrfs/ioctl.c:4872:10)
  #15 vfs_ioctl (fs/ioctl.c:51:10)
  #16 __do_sys_ioctl (fs/ioctl.c:874:11)
  #17 __se_sys_ioctl (fs/ioctl.c:860:1)
  #18 __x64_sys_ioctl (fs/ioctl.c:860:1)
  #19 do_syscall_x64 (arch/x86/entry/common.c:50:14)
  #20 do_syscall_64 (arch/x86/entry/common.c:80:7)
  #21 entry_SYSCALL_64+0x7c/0x15b (arch/x86/entry/entry_64.S:113)

A huge page is represented by a compound page, which consists of a
struct page for each PAGE_SIZE page within the huge page. The first
struct page is the "head page", and the remaining are "tail pages".

Defragmentation attempts to lock each page in the range. However,
lock_page() on a tail page actually locks the corresponding head page.
So, if defragmentation tries to lock more than one struct page in a
compound page, it tries to lock the same head page twice and deadlocks
with itself.

Ideally, we should be able to defragment transparent huge pages.
However, THP for filesystems is currently read-only, so a lot of code is
not ready to use huge pages for I/O. For now, let's just return
ETXTBUSY.

This can be reproduced with the following on a kernel with
CONFIG_READ_ONLY_THP_FOR_FS=y:

  $ cat create_thp_file.c
  #include <fcntl.h>
  #include <stdbool.h>
  #include <stdio.h>
  #include <stdint.h>
  #include <stdlib.h>
  #include <unistd.h>
  #include <sys/mman.h>

  static const char zeroes[1024 * 1024];
  static const size_t FILE_SIZE = 2 * 1024 * 1024;

  int main(int argc, char **argv)
  {
          if (argc != 2) {
                  fprintf(stderr, "usage: %s PATH\n", argv[0]);
                  return EXIT_FAILURE;
          }
          int fd = creat(argv[1], 0777);
          if (fd == -1) {
                  perror("creat");
                  return EXIT_FAILURE;
          }
          size_t written = 0;
          while (written < FILE_SIZE) {
                  ssize_t ret = write(fd, zeroes,
                                      sizeof(zeroes) < FILE_SIZE - written ?
                                      sizeof(zeroes) : FILE_SIZE - written);
                  if (ret < 0) {
                          perror("write");
                          return EXIT_FAILURE;
                  }
                  written += ret;
          }
          close(fd);
          fd = open(argv[1], O_RDONLY);
          if (fd == -1) {
                  perror("open");
                  return EXIT_FAILURE;
          }

          /*
           * Reserve some address space so that we can align the file mapping to
           * the huge page size.
           */
          void *placeholder_map = mmap(NULL, FILE_SIZE * 2, PROT_NONE,
                                       MAP_PRIVATE | MAP_ANONYMOUS, -1, 0);
          if (placeholder_map == MAP_FAILED) {
                  perror("mmap (placeholder)");
                  return EXIT_FAILURE;
          }

          void *aligned_address =
                  (void *)(((uintptr_t)placeholder_map + FILE_SIZE - 1) & ~(FILE_SIZE - 1));

          void *map = mmap(aligned_address, FILE_SIZE, PROT_READ | PROT_EXEC,
                           MAP_SHARED | MAP_FIXED, fd, 0);
          if (map == MAP_FAILED) {
                  perror("mmap");
                  return EXIT_FAILURE;
          }
          if (madvise(map, FILE_SIZE, MADV_HUGEPAGE) < 0) {
                  perror("madvise");
                  return EXIT_FAILURE;
          }

          char *line = NULL;
          size_t line_capacity = 0;
          FILE *smaps_file = fopen("/proc/self/smaps", "r");
          if (!smaps_file) {
                  perror("fopen");
                  return EXIT_FAILURE;
          }
          for (;;) {
                  for (size_t off = 0; off < FILE_SIZE; off += 4096)
                          ((volatile char *)map)[off];

                  ssize_t ret;
                  bool this_mapping = false;
                  while ((ret = getline(&line, &line_capacity, smaps_file)) > 0) {
                          unsigned long start, end, huge;
                          if (sscanf(line, "%lx-%lx", &start, &end) == 2) {
                                  this_mapping = (start <= (uintptr_t)map &&
                                                  (uintptr_t)map < end);
                          } else if (this_mapping &&
                                     sscanf(line, "FilePmdMapped: %ld", &huge) == 1 &&
                                     huge > 0) {
                                  return EXIT_SUCCESS;
                          }
                  }

                  sleep(6);
                  rewind(smaps_file);
                  fflush(smaps_file);
          }
  }
  $ ./create_thp_file huge
  $ btrfs fi defrag -czstd ./huge

Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Omar Sandoval <osandov@fb.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

Commit 2efc459d

 ("sysfs: Add sysfs_emit and sysfs_emit_at to format
sysfs out") merged in 5.10 introduced two new functions sysfs_emit() and
sysfs_emit_at() which are aware of the PAGE_SIZE limit of the output
buffer.

Use the above two new functions instead of scnprintf() and snprintf()
in various sysfs show().

Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

It's a common practice to avoid use sizeof(struct btrfs_super_block)
(3531), but to use BTRFS_SUPER_INFO_SIZE (4096).

The problem is that, sizeof(struct btrfs_super_block) doesn't match
BTRFS_SUPER_INFO_SIZE from the very beginning.

Furthermore, for all call sites except selftests, we always allocate
BTRFS_SUPER_INFO_SIZE space for super block, there isn't any real reason
to use the smaller value, and it doesn't really save any space.

So let's get rid of such confusing behavior, and unify those two values.

This modification also adds a new static_assert() to verify the size,
and moves the BTRFS_SUPER_INFO_* macros to the definition of
btrfs_super_block for the static_assert().

Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

Update the comments at btrfs_chunk_alloc() and do_chunk_alloc() that
describe which cases can lead to a failure to allocate metadata and system
space despite having previously reserved space. This adds one more reason
that I previously forgot to mention.

Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

When a task is doing some modification to the chunk btree and it is not in
the context of a chunk allocation or a chunk removal, it can deadlock with
another task that is currently allocating a new data or metadata chunk.

These contexts are the following:

* When relocating a system chunk, when we need to COW the extent buffers
  that belong to the chunk btree;

* When adding a new device (ioctl), where we need to add a new device item
  to the chunk btree;

* When removing a device (ioctl), where we need to remove a device item
  from the chunk btree;

* When resizing a device (ioctl), where we need to update a device item in
  the chunk btree and may need to relocate a system chunk that lies beyond
  the new device size when shrinking a device.

The problem happens due to a sequence of steps like the following:

1) Task A starts a data or metadata chunk allocation and it locks the
   chunk mutex;

2) Task B is relocating a system chunk, and when it needs to COW an extent
   buffer of the chunk btree, it has locked both that extent buffer as
   well as its parent extent buffer;

3) Since there is not enough available system space, either because none
   of the existing system block groups have enough free space or because
   the only one with enough free space is in RO mode due to the relocation,
   task B triggers a new system chunk allocation. It blocks when trying to
   acquire the chunk mutex, currently held by task A;

4) Task A enters btrfs_chunk_alloc_add_chunk_item(), in order to insert
   the new chunk item into the chunk btree and update the existing device
   items there. But in order to do that, it has to lock the extent buffer
   that task B locked at step 2, or its parent extent buffer, but task B
   is waiting on the chunk mutex, which is currently locked by task A,
   therefore resulting in a deadlock.

One example report when the deadlock happens with system chunk relocation:

  INFO: task kworker/u9:5:546 blocked for more than 143 seconds.
        Not tainted 5.15.0-rc3+ #1
  "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
  task:kworker/u9:5    state:D stack:25936 pid:  546 ppid:     2 flags:0x00004000
  Workqueue: events_unbound btrfs_async_reclaim_metadata_space
  Call Trace:
   context_switch kernel/sched/core.c:4940 [inline]
   __schedule+0xcd9/0x2530 kernel/sched/core.c:6287
   schedule+0xd3/0x270 kernel/sched/core.c:6366
   rwsem_down_read_slowpath+0x4ee/0x9d0 kernel/locking/rwsem.c:993
   __down_read_common kernel/locking/rwsem.c:1214 [inline]
   __down_read kernel/locking/rwsem.c:1223 [inline]
   down_read_nested+0xe6/0x440 kernel/locking/rwsem.c:1590
   __btrfs_tree_read_lock+0x31/0x350 fs/btrfs/locking.c:47
   btrfs_tree_read_lock fs/btrfs/locking.c:54 [inline]
   btrfs_read_lock_root_node+0x8a/0x320 fs/btrfs/locking.c:191
   btrfs_search_slot_get_root fs/btrfs/ctree.c:1623 [inline]
   btrfs_search_slot+0x13b4/0x2140 fs/btrfs/ctree.c:1728
   btrfs_update_device+0x11f/0x500 fs/btrfs/volumes.c:2794
   btrfs_chunk_alloc_add_chunk_item+0x34d/0xea0 fs/btrfs/volumes.c:5504
   do_chunk_alloc fs/btrfs/block-group.c:3408 [inline]
   btrfs_chunk_alloc+0x84d/0xf50 fs/btrfs/block-group.c:3653
   flush_space+0x54e/0xd80 fs/btrfs/space-info.c:670
   btrfs_async_reclaim_metadata_space+0x396/0xa90 fs/btrfs/space-info.c:953
   process_one_work+0x9df/0x16d0 kernel/workqueue.c:2297
   worker_thread+0x90/0xed0 kernel/workqueue.c:2444
   kthread+0x3e5/0x4d0 kernel/kthread.c:319
   ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:295
  INFO: task syz-executor:9107 blocked for more than 143 seconds.
        Not tainted 5.15.0-rc3+ #1
  "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
  task:syz-executor    state:D stack:23200 pid: 9107 ppid:  7792 flags:0x00004004
  Call Trace:
   context_switch kernel/sched/core.c:4940 [inline]
   __schedule+0xcd9/0x2530 kernel/sched/core.c:6287
   schedule+0xd3/0x270 kernel/sched/core.c:6366
   schedule_preempt_disabled+0xf/0x20 kernel/sched/core.c:6425
   __mutex_lock_common kernel/locking/mutex.c:669 [inline]
   __mutex_lock+0xc96/0x1680 kernel/locking/mutex.c:729
   btrfs_chunk_alloc+0x31a/0xf50 fs/btrfs/block-group.c:3631
   find_free_extent_update_loop fs/btrfs/extent-tree.c:3986 [inline]
   find_free_extent+0x25cb/0x3a30 fs/btrfs/extent-tree.c:4335
   btrfs_reserve_extent+0x1f1/0x500 fs/btrfs/extent-tree.c:4415
   btrfs_alloc_tree_block+0x203/0x1120 fs/btrfs/extent-tree.c:4813
   __btrfs_cow_block+0x412/0x1620 fs/btrfs/ctree.c:415
   btrfs_cow_block+0x2f6/0x8c0 fs/btrfs/ctree.c:570
   btrfs_search_slot+0x1094/0x2140 fs/btrfs/ctree.c:1768
   relocate_tree_block fs/btrfs/relocation.c:2694 [inline]
   relocate_tree_blocks+0xf73/0x1770 fs/btrfs/relocation.c:2757
   relocate_block_group+0x47e/0xc70 fs/btrfs/relocation.c:3673
   btrfs_relocate_block_group+0x48a/0xc60 fs/btrfs/relocation.c:4070
   btrfs_relocate_chunk+0x96/0x280 fs/btrfs/volumes.c:3181
   __btrfs_balance fs/btrfs/volumes.c:3911 [inline]
   btrfs_balance+0x1f03/0x3cd0 fs/btrfs/volumes.c:4301
   btrfs_ioctl_balance+0x61e/0x800 fs/btrfs/ioctl.c:4137
   btrfs_ioctl+0x39ea/0x7b70 fs/btrfs/ioctl.c:4949
   vfs_ioctl fs/ioctl.c:51 [inline]
   __do_sys_ioctl fs/ioctl.c:874 [inline]
   __se_sys_ioctl fs/ioctl.c:860 [inline]
   __x64_sys_ioctl+0x193/0x200 fs/ioctl.c:860
   do_syscall_x64 arch/x86/entry/common.c:50 [inline]
   do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80
   entry_SYSCALL_64_after_hwframe+0x44/0xae

So fix this by making sure that whenever we try to modify the chunk btree
and we are neither in a chunk allocation context nor in a chunk remove
context, we reserve system space before modifying the chunk btree.

Reported-by: Hao Sun <sunhao.th@gmail.com>
Link: https://lore.kernel.org/linux-btrfs/CACkBjsax51i4mu6C0C3vJqQN3NR_iVuucoeG3U1HXjrgzn5FFQ@mail.gmail.com/
Fixes: 79bd3712

 ("btrfs: rework chunk allocation to avoid exhaustion of the system chunk array")
CC: stable@vger.kernel.org # 5.14+
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

Currently auto reclaim of unusable zones reclaims the block-groups in
the order they have been added to the reclaim list.

Change this to a greedy algorithm by sorting the list so we have the
block-groups with the least amount of valid bytes reclaimed first.

Note: we can't splice the block groups from reclaim_bgs to let the sort
happen outside of the lock. The block groups can be still in use by
other parts eg. via bg_list and we must hold unused_bgs_lock while
processing them.

Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: David Sterba <dsterba@suse.com>
[ write note and comment why we can't splice the list ]
Signed-off-by: David Sterba <dsterba@suse.com>

Just use the %pg format specifier in all the debug printks previously
using it.  Note that both bdevname and the %pg specifier never print
a pathname, so the kbasename call wasn't needed to start with.

Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: David Sterba <dsterba@suse.com>
[ adjust messages and indentation ]
Signed-off-by: David Sterba <dsterba@suse.com>

For device removal and replace we call btrfs_find_device_by_devspec,
which if we give it a device path and nothing else will call
btrfs_get_dev_args_from_path, which opens the block device and reads the
super block and then looks up our device based on that.

However at this point we're holding the sb write "lock", so reading the
block device pulls in the dependency of ->open_mutex, which produces the
following lockdep splat

======================================================
WARNING: possible circular locking dependency detected
5.14.0-rc2+ #405 Not tainted
------------------------------------------------------
losetup/11576 is trying to acquire lock:
ffff9bbe8cded938 ((wq_completion)loop0){+.+.}-{0:0}, at: flush_workqueue+0x67/0x5e0

but task is already holding lock:
ffff9bbe88e4fc68 (&lo->lo_mutex){+.+.}-{3:3}, at: __loop_clr_fd+0x41/0x660 [loop]

which lock already depends on the new lock.

the existing dependency chain (in reverse order) is:

-> #4 (&lo->lo_mutex){+.+.}-{3:3}:
       __mutex_lock+0x7d/0x750
       lo_open+0x28/0x60 [loop]
       blkdev_get_whole+0x25/0xf0
       blkdev_get_by_dev.part.0+0x168/0x3c0
       blkdev_open+0xd2/0xe0
       do_dentry_open+0x161/0x390
       path_openat+0x3cc/0xa20
       do_filp_open+0x96/0x120
       do_sys_openat2+0x7b/0x130
       __x64_sys_openat+0x46/0x70
       do_syscall_64+0x38/0x90
       entry_SYSCALL_64_after_hwframe+0x44/0xae

-> #3 (&disk->open_mutex){+.+.}-{3:3}:
       __mutex_lock+0x7d/0x750
       blkdev_get_by_dev.part.0+0x56/0x3c0
       blkdev_get_by_path+0x98/0xa0
       btrfs_get_bdev_and_sb+0x1b/0xb0
       btrfs_find_device_by_devspec+0x12b/0x1c0
       btrfs_rm_device+0x127/0x610
       btrfs_ioctl+0x2a31/0x2e70
       __x64_sys_ioctl+0x80/0xb0
       do_syscall_64+0x38/0x90
       entry_SYSCALL_64_after_hwframe+0x44/0xae

-> #2 (sb_writers#12){.+.+}-{0:0}:
       lo_write_bvec+0xc2/0x240 [loop]
       loop_process_work+0x238/0xd00 [loop]
       process_one_work+0x26b/0x560
       worker_thread+0x55/0x3c0
       kthread+0x140/0x160
       ret_from_fork+0x1f/0x30

-> #1 ((work_completion)(&lo->rootcg_work)){+.+.}-{0:0}:
       process_one_work+0x245/0x560
       worker_thread+0x55/0x3c0
       kthread+0x140/0x160
       ret_from_fork+0x1f/0x30

-> #0 ((wq_completion)loop0){+.+.}-{0:0}:
       __lock_acquire+0x10ea/0x1d90
       lock_acquire+0xb5/0x2b0
       flush_workqueue+0x91/0x5e0
       drain_workqueue+0xa0/0x110
       destroy_workqueue+0x36/0x250
       __loop_clr_fd+0x9a/0x660 [loop]
       block_ioctl+0x3f/0x50
       __x64_sys_ioctl+0x80/0xb0
       do_syscall_64+0x38/0x90
       entry_SYSCALL_64_after_hwframe+0x44/0xae

other info that might help us debug this:

Chain exists of:
  (wq_completion)loop0 --> &disk->open_mutex --> &lo->lo_mutex

 Possible unsafe locking scenario:

       CPU0                    CPU1
       ----                    ----
  lock(&lo->lo_mutex);
                               lock(&disk->open_mutex);
                               lock(&lo->lo_mutex);
  lock((wq_completion)loop0);

 *** DEADLOCK ***

1 lock held by losetup/11576:
 #0: ffff9bbe88e4fc68 (&lo->lo_mutex){+.+.}-{3:3}, at: __loop_clr_fd+0x41/0x660 [loop]

stack backtrace:
CPU: 0 PID: 11576 Comm: losetup Not tainted 5.14.0-rc2+ #405
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.13.0-2.fc32 04/01/2014
Call Trace:
 dump_stack_lvl+0x57/0x72
 check_noncircular+0xcf/0xf0
 ? stack_trace_save+0x3b/0x50
 __lock_acquire+0x10ea/0x1d90
 lock_acquire+0xb5/0x2b0
 ? flush_workqueue+0x67/0x5e0
 ? lockdep_init_map_type+0x47/0x220
 flush_workqueue+0x91/0x5e0
 ? flush_workqueue+0x67/0x5e0
 ? verify_cpu+0xf0/0x100
 drain_workqueue+0xa0/0x110
 destroy_workqueue+0x36/0x250
 __loop_clr_fd+0x9a/0x660 [loop]
 ? blkdev_ioctl+0x8d/0x2a0
 block_ioctl+0x3f/0x50
 __x64_sys_ioctl+0x80/0xb0
 do_syscall_64+0x38/0x90
 entry_SYSCALL_64_after_hwframe+0x44/0xae
RIP: 0033:0x7f31b02404cb

Instead what we want to do is populate our device lookup args before we
grab any locks, and then pass these args into btrfs_rm_device().  From
there we can find the device and do the appropriate removal.

Suggested-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>

We are going to want to populate our device lookup args outside of any
locks and then do the actual device lookup later, so add a helper to do
this work and make btrfs_find_device_by_devspec() use this helper for
now.

Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>

We have a lot of device lookup functions that all do something slightly
different.  Clean this up by adding a struct to hold the different
lookup criteria, and then pass this around to btrfs_find_device() so it
can do the proper matching based on the lookup criteria.

Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

There's a subtle case where if we're removing the seed device from a
file system we need to free its private copy of the fs_devices.  However
we do not need to call close_fs_devices(), because at this point there
are no devices left to close as we've closed the last one.  The only
thing that close_fs_devices() does is decrement ->opened, which should
be 1.  We want to avoid calling close_fs_devices() here because it has a
lockdep_assert_held(&uuid_mutex), and we are going to stop holding the
uuid_mutex in this path.

So simply decrement the  ->opened counter like we should, and then clean
up like normal.  Also add a comment explaining what we're doing here as
I initially removed this code erroneously.

Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>

A bug was was checking a wrong device count before we delete the struct
btrfs_fs_devices in btrfs_rm_device(). To avoid future confusion and
easy reference add a comment about the various device counts that we have
in the struct btrfs_fs_devices.

Signed-off-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>

For both sprout and seed fsids,
 btrfs_fs_devices::num_devices provides device count including missing
 btrfs_fs_devices::open_devices provides device count excluding missing

We create a dummy struct btrfs_device for the missing device, so
num_devices != open_devices when there is a missing device.

In btrfs_rm_devices() we wrongly check for %cur_devices->open_devices
before freeing the seed fs_devices. Instead we should check for
%cur_devices->num_devices.

Signed-off-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>

At replay_dir_deletes(), if find_dir_range() returns an error we break out
of the main while loop and then assign a value of 0 (success) to the 'ret'
variable, resulting in completely ignoring that an error happened. Fix
that by jumping to the 'out' label when find_dir_range() returns an error
(negative value).

CC: stable@vger.kernel.org # 4.4+
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

The member btrfs_bio::logical is only initialized by two call sites:

- btrfs_repair_one_sector()
  No corresponding site to utilize it.

- btrfs_submit_direct()
  The corresponding site to utilize it is btrfs_check_read_dio_bio().

However for btrfs_check_read_dio_bio(), we can grab the file_offset from
btrfs_dio_private::file_offset directly.

Thus it turns out we don't really need that btrfs_bio::logical member at
all.

For btrfs_bio, the logical bytenr can be fetched from its
bio->bi_iter.bi_sector directly.

So let's just remove the member to save 8 bytes for structure btrfs_bio.

Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

The naming of "logical_offset" can be confused with logical bytenr of
the dio range.

In fact it's file offset, and the naming "file_offset" is already widely
used in all other sites.

Just do the rename to avoid confusion.

Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

Using local kmaps slightly reduces the chances to stray writes, and
the bvec interface cleans up the code a little bit.

Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

btrfs_update_block_group() accounts for the number of bytes allocated or
freed. Argument @alloc specifies whether the call is for alloc or free.
Convert the argument @alloc type from int to bool.

Reviewed-by: Su Yue <l@damenly.su>
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

Now that real_root is only used in ref-verify core gate it behind
CONFIG_BTRFS_FS_REF_VERIFY ifdef. This shrinks the size of pending
delayed refs by 8 bytes per ref, of which we can have many at any one
time depending on intensity of the workload. Also change the comment
about the member as it no longer deals with qgroups.

Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

Instead of checking whether qgroup processing for a dealyed ref has to
happen in the core of delayed ref, simply pull the check at init time of
respective delayed ref structures. This eliminates the final use of
real_root in delayed-ref core paving the way to making this member
optional.

Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

In order to make 'real_root' used only in ref-verify it's required to
have the necessary context to perform the same checks that this member
is used for. So add 'mod_root' which will contain the root on behalf of
which a delayed ref was created and a 'skip_group' parameter which
will contain callsite-specific override of skip_qgroup.

Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

The real_root field is going to be used only by ref-verify tool so limit
its use outside of it. Blocks belonging to the chunk root will always
have it as an owner so the check is equivalent.

Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

Both data and metadata delayed ref structures have fields named
root/ref_root respectively. Those are somewhat cryptic and don't really
convey the real meaning. In fact those roots are really the original
owners of the respective block (i.e in case of a snapshot a data delayed
ref will contain the original root that owns the given block). Rename
those fields accordingly and adjust comments.

Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

Error injection stressing uncovered a busy loop in our data reclaim
loop.  There are two cases here, one where we loop creating block groups
until space_info->full is set, or in the main loop we will skip erroring
out any tickets if space_info->full == 0.  Unfortunately if we aborted
the transaction then we will never allocate chunks or reclaim any space
and thus never get ->full, and you'll see stack traces like this:

  watchdog: BUG: soft lockup - CPU#0 stuck for 26s! [kworker/u4:4:139]
  CPU: 0 PID: 139 Comm: kworker/u4:4 Tainted: G        W         5.13.0-rc1+ #328
  Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.13.0-2.fc32 04/01/2014
  Workqueue: events_unbound btrfs_async_reclaim_data_space
  RIP: 0010:btrfs_join_transaction+0x12/0x20
  RSP: 0018:ffffb2b780b77de0 EFLAGS: 00000246
  RAX: ffffb2b781863d58 RBX: 0000000000000000 RCX: 0000000000000000
  RDX: 0000000000000801 RSI: ffff987952b57400 RDI: ffff987940aa3000
  RBP: ffff987954d55000 R08: 0000000000000001 R09: ffff98795539e8f0
  R10: 000000000000000f R11: 000000000000000f R12: ffffffffffffffff
  R13: ffff987952b574c8 R14: ffff987952b57400 R15: 0000000000000008
  FS:  0000000000000000(0000) GS:ffff9879bbc00000(0000) knlGS:0000000000000000
  CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
  CR2: 00007f0703da4000 CR3: 0000000113398004 CR4: 0000000000370ef0
  Call Trace:
   flush_space+0x4a8/0x660
   btrfs_async_reclaim_data_space+0x55/0x130
   process_one_work+0x1e9/0x380
   worker_thread+0x53/0x3e0
   ? process_one_work+0x380/0x380
   kthread+0x118/0x140
   ? __kthread_bind_mask+0x60/0x60
   ret_from_fork+0x1f/0x30

Fix this by checking to see if we have a btrfs fs error in either of the
reclaim loops, and if so fail the tickets and bail.  In addition to
this, fix maybe_fail_all_tickets() to not try to grant tickets if we've
aborted, simply fail everything.

Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>

We have a few flags that are inconsistently used to describe the fs in
different states of failure.  As of 5963ffca ("btrfs: always abort
the transaction if we abort a trans handle") we will always set
BTRFS_FS_STATE_ERROR if we abort, so we don't have to check both ABORTED
and ERROR to see if things have gone wrong.  Add a helper to check
BTRFS_FS_STATE_ERROR and then convert all checkers of FS_STATE_ERROR to
use the helper.

The TRANS_ABORTED bit check was added in af722733

 ("Btrfs: clean up
resources during umount after trans is aborted") but is not actually
specific.

Reviewed-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

Currently we will abort the transaction if we get a random error (like
-EIO) while trying to remove the directory entries from the root log
during rename.

However since these are simply log tree related errors, we can mark the
trans as needing a full commit.  Then if the error was truly
catastrophic we'll hit it during the normal commit and abort as
appropriate.

Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>

During inspection of the return path for replay I noticed that we don't
actually abort the transaction if we get a failure during replay.  This
isn't a problem necessarily, as we properly return the error and will
fail to mount.  However we still leave this dangling transaction that
could conceivably be committed without thinking there was an error.

We were using btrfs_handle_fs_error() here, but that pre-dates the
transaction abort code.  Simply replace the btrfs_handle_fs_error()
calls with transaction aborts, so we still know where exactly things
went wrong, and add a few in some other un-handled error cases.

Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

Fix memdup.cocci warning:
fs/btrfs/zoned.c:1198:23-30: WARNING opportunity for kmemdup

Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Kai Song <songkai01@inspur.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

For compressed write, we use a mechanism called async COW, which unlike
regular run_delalloc_cow() or cow_file_range() will also unlock the
first page.

This mechanism allows us to continue handling next ranges, without
waiting for the time consuming compression.

But this has a problem for subpage case, as we could have the following
delalloc range for a page:

0		32K		64K
|	|///////|	|///////|
		\- A		\- B

In the above case, if we pass both ranges to cow_file_range_async(),
both range A and range B will try to unlock the full page [0, 64K).

And which one finishes later than the other one will try to do other
page operations like end_page_writeback() on a unlocked page, triggering
VM layer BUG_ON().

To make subpage compression work at least partially, here we add another
restriction for it, only allow compression if the delalloc range is
fully page aligned.

By that, async extent is always ensured to unlock the first page
exclusively, just like it used to be for regular sectorsize.

In theory, we only need to make sure the delalloc range fully covers its
first page, but the tail page will be locked anyway, blocking later
writeback until the compression finishes.

Thus here we choose to make sure the range is fully page aligned before
doing the compression.

In the future, we could optimize the situation by properly increasing
subpage::writers number for the locked page, but that also means we need
to change how we run delalloc range of page.
(Instead of running each delalloc range we hit, we need to find and lock
all delalloc ranges covering the page, then run each of them).

Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

[BUG]
With experimental subpage compression enabled, a simple fsstress can
lead to self deadlock on page 720896:

        mkfs.btrfs -f -s 4k $dev > /dev/null
        mount $dev -o compress $mnt
        $fsstress -p 1 -n 100 -w -d $mnt -v -s 1625511156

[CAUSE]
If we have a file layout looks like below:

	0	32K	64K	96K	128K
	|//|		|///////////////|
	   4K

Then we run delalloc range for the inode, it will:

- Call find_lock_delalloc_range() with @delalloc_start = 0
  Then we got a delalloc range [0, 4K).

  This range will be COWed.

- Call find_lock_delalloc_range() again with @delalloc_start = 4K
  Since find_lock_delalloc_range() never cares whether the range
  is still inside page range [0, 64K), it will return range [64K, 128K).

  This range meets the condition for subpage compression, will go
  through async COW path.

  And async COW path will return @page_started.

  But that @page_started is now for range [64K, 128K), not for range
  [0, 64K).

- writepage_dellloc() returned 1 for page [0, 64K)
  Thus page [0, 64K) will not be unlocked, nor its page dirty status
  will be cleared.

Next time when we try to lock page [0, 64K) we will deadlock, as there
is no one to release page [0, 64K).

This problem will never happen for regular page size as one page only
contains one sector.  After the first find_lock_delalloc_range() call,
the @delalloc_end will go beyond @page_end no matter if we found a
delalloc range or not

Thus this bug only happens for subpage, as now we need multiple runs to
exhaust the delalloc range of a page.

[FIX]
Fix the problem by ensuring the delalloc range we ran at least started
inside @locked_page.

So that we will never get incorrect @page_started.

And to prevent such problem from happening again:

- Make find_lock_delalloc_range() return false if the found range is
  beyond @end value passed in.

  Since @end will be utilized now, add an ASSERT() to ensure we pass
  correct @end into find_lock_delalloc_range().

  This also means, for selftests we needs to populate @end before calling
  find_lock_delalloc_range().

- New ASSERT() in find_lock_delalloc_range()
  Now we will make sure the @start/@end passed in at least covers part
  of the page.

- New ASSERT() in run_delalloc_range()
  To make sure the range at least starts inside @locked page.

- Use @delalloc_start as proper cursor, while @delalloc_end is always
  reset to @page_end.

Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

There are several call sites of extent_clear_unlock_delalloc() which get
@locked_page = NULL.
So that extent_clear_unlock_delalloc() will try to call
process_one_page() to unlock every page even the first page is not
locked by btrfs_page_start_writer_lock().

This will trigger an ASSERT() in btrfs_subpage_end_and_test_writer() as
previously we require every page passed to
btrfs_subpage_end_and_test_writer() to be locked by
btrfs_page_start_writer_lock().

But compression path doesn't go that way.

Thankfully it's not hard to distinguish page locked by lock_page() and
btrfs_page_start_writer_lock().

So do the check in btrfs_subpage_end_and_test_writer() so now it can
handle both cases well.

Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

Pages passed to __extent_writepage() are always locked, but they may be
locked by different functions.

There are two types of locked page for __extent_writepage():

- Page locked by plain lock_page()
  It should not have any subpage::writers count.
  Can be unlocked by unlock_page().
  This is the most common locked page for __extent_writepage() called
  inside extent_write_cache_pages() or extent_write_full_page().
  Rarer cases include the @locked_page from extent_write_locked_range().

- Page locked by lock_delalloc_pages()
  There is only one caller, all pages except @locked_page for
  extent_write_locked_range().
  In this case, we have to call subpage helper to handle the case.

So here we introduce a helper, btrfs_page_unlock_writer(), to allow
__extent_writepage() to unlock different locked pages.

And since for all other callers of __extent_writepage() their pages are
ensured to be locked by lock_page(), also add an extra check for
epd::extent_locked to unlock such pages directly.

Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

There are several problems in lzo_compress_pages() preventing it from
being subpage compatible:

- No page offset is calculated when reading from inode pages
  For subpage case, we could have @start which is not aligned to
  PAGE_SIZE.

  Thus the destination where we read data from must take offset in page
  into consideration.

- The padding for segment header is bound to PAGE_SIZE
  This means, for subpage case we can skip several corners where on x86
  machines we need to add padding zeros.

The rework will:

- Update the comment to replace "page" with "sector"

- Introduce a new helper, copy_compressed_data_to_page(), to do the copy
  So that we don't need to bother page switching for both input and
  output.

  Now in lzo_compress_pages() we only care about page switching for
  input, while in copy_compressed_data_to_page() we only care about the
  page switching for output.

- Only one main cursor
  For lzo_compress_pages() we use @cur_in as main cursor.
  It will be the file offset we are currently at.

  All other helper variables will be only declared inside the loop.

  For copy_compressed_data_to_page() it's similar, we will have
  @cur_out at the main cursor, which records how many bytes are in the
  output.

Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

Introduce a new helper, submit_uncompressed_range(), for async cow cases
where we fallback to COW.

There are some new updates introduced to the helper:

- Proper locked_page detection
  It's possible that the async_extent range doesn't cover the locked
  page.  In that case we shouldn't unlock the locked page.

  In the new helper, we will ensure that we only unlock the locked page
  when:

  * The locked page covers part of the async_extent range
  * The locked page is not unlocked by cow_file_range() nor
    extent_write_locked_range()

  This also means extra comments are added focusing on the page locking.

- Add extra comment on some rare parameter used.
  We use @unlock_page = 0 for cow_file_range(), where only two call
  sites doing the same thing, including the new helper.

  It's definitely worth some comments.

Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

There are two sites are not subpage compatible yet for
extent_write_locked_range():

- How @nr_pages are calculated
  For subpage we can have the following range with 64K page size:

  0   32K  64K   96K 128K
  |   |////|/////|   |

  In that case, although 96K - 32K == 64K, thus it looks like one page
  is enough, but the range spans two pages, not one.

  Fix it by doing proper round_up() and round_down() to calculate
  @nr_pages.

  Also add some extra ASSERT()s to ensure the range passed in is already
  aligned.

- How the page end is calculated
  Currently we just use cur + PAGE_SIZE - 1 to calculate the page end.

  Which can't handle the above range layout, and will trigger ASSERT()
  in btrfs_writepage_endio_finish_ordered(), as the range is no longer
  covered by the page range.

  Fix it by taking page end into consideration.

Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

In end_compressed_writeback() we just clear the full page writeback.
For subpage case, if there are two delalloc ranges in the same page, the
2nd range will trigger a BUG_ON() as the page writeback is already
cleared by previous range.

Fix it by using btrfs_page_clamp_clear_writeback() helper.

Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>