Fix race condition leading to system crash during EEH error handling

During EEH error recovery, the bnx2x driver's transmit timeout logic
could cause a race condition when handling reset tasks. The
bnx2x_tx_timeout() schedules reset tasks via bnx2x_sp_rtnl_task(),
which ultimately leads to bnx2x_nic_unload(). In bnx2x_nic_unload()
SGEs are freed using bnx2x_free_rx_sge_range(). However, this could
overlap with the EEH driver's attempt to reset the device using
bnx2x_io_slot_reset(), which also tries to free SGEs. This race
condition can result in system crashes due to accessing freed memory
locations in bnx2x_free_rx_sge()

799  static inline void bnx2x_free_rx_sge(struct bnx2x *bp,
800				struct bnx2x_fastpath *fp, u16 index)
801  {
802	struct sw_rx_page *sw_buf = &fp->rx_page_ring[index];
803     struct page *page = sw_buf->page;
....
where sw_buf was set to NULL after the call to dma_unmap_page()
by the preceding thread.

    EEH: Beginning: 'slot_reset'
    PCI 0011:01:00.0#10000: EEH: Invoking bnx2x->slot_reset()
    bnx2x: [bnx2x_io_slot_reset:14228(eth1)]IO slot reset initializing...
    bnx2x 0011:01:00.0: enabling device (0140 -> 0142)
    bnx2x: [bnx2x_io_slot_reset:14244(eth1)]IO slot reset --> driver unload
    Kernel attempted to read user page (0) - exploit attempt? (uid: 0)
    BUG: Kernel NULL pointer dereference on read at 0x00000000
    Faulting instruction address: 0xc0080000025065fc
    Oops: Kernel access of bad area, sig: 11 [#1]
    .....
    Call Trace:
    [c000000003c67a20] [c00800000250658c] bnx2x_io_slot_reset+0x204/0x610 [bnx2x] (unreliable)
    [c000000003c67af0] [c0000000000518a8] eeh_report_reset+0xb8/0xf0
    [c000000003c67b60] [c000000000052130] eeh_pe_report+0x180/0x550
    [c000000003c67c70] [c00000000005318c] eeh_handle_normal_event+0x84c/0xa60
    [c000000003c67d50] [c000000000053a84] eeh_event_handler+0xf4/0x170
    [c000000003c67da0] [c000000000194c58] kthread+0x1c8/0x1d0
    [c000000003c67e10] [c00000000000cf64] ret_from_kernel_thread+0x5c/0x64

To solve this issue, we need to verify page pool allocations before
freeing.

Fixes: 4cace675

 ("bnx2x: Alloc 4k fragment for each rx ring buffer element")
Signed-off-by: Thinh Tran <thinhtr@linux.ibm.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Link: https://lore.kernel.org/r/20240315205535.1321-1-thinhtr@linux.ibm.com


Signed-off-by: Jakub Kicinski <kuba@kernel.org>

read_poll_timeout inside phy_read_poll_timeout can set val negative
in some cases (for example, __mdiobus_read inside phy_read can return
-EOPNOTSUPP).

Supposedly, commit 4ec73295 ("net: phylib: fix phy_read*_poll_timeout()")
should fix problems with wrong-signed vals, but I do not see how
as val is sent to phy_read as is and __val = phy_read (not val)
is checked for sign.

Change val type for signed to allow better error handling as done in other
phy_read_poll_timeout callers. This will not fix any error handling
by itself, but allows, for example, to modify cond with appropriate
sign check or check resulting val separately.

Found by Linux Verification Center (linuxtesting.org) with SVACE.

Fixes: 014068dc

 ("net: phy: genphy_loopback: add link speed configuration")
Signed-off-by: Nikita Kiryushin <kiryushin@ancud.ru>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://lore.kernel.org/r/20240315175052.8049-1-kiryushin@ancud.ru


Signed-off-by: Paolo Abeni <pabeni@redhat.com>

The commit 2c15a5ae ("net/sched: Load modules via their alias")
starts loading modules via aliases and not canonical names. The new
aliases were added in commit 241a94ab ("net/sched: Add module
aliases for cls_,sch_,act_ modules") via a Coccinele script.

sch_fq_pie.c is missing module.h header and thus Coccinele did not patch
it. Add the include and module alias manually, so that autoloading works
for sch_fq_pie too.

(Note: commit message in commit 241a94ab ("net/sched: Add module
aliases for cls_,sch_,act_ modules") was mangled due to '#'
misinterpretation. The predicate haskernel is:

| @ haskernel @
| @@
|
| #include <linux/module.h>
|
.)

Fixes: 241a94ab

 ("net/sched: Add module aliases for cls_,sch_,act_ modules")
Signed-off-by: Michal Koutný <mkoutny@suse.com>
Link: https://lore.kernel.org/r/20240315160210.8379-1-mkoutny@suse.com


Signed-off-by: Paolo Abeni <pabeni@redhat.com>

Since the referenced commit, the xfrm_inner_extract_output() function
uses the protocol field to determine the address family.  So not setting
it for IPv4 raw sockets meant that such packets couldn't be tunneled via
IPsec anymore.

IPv6 raw sockets are not affected as they already set the protocol since
9c9c9ad5 ("ipv6: set skb->protocol on tcp, raw and ip6_append_data
genereated skbs").

Fixes: f4796398

 ("xfrm: Remove inner/outer modes from output path")
Signed-off-by: Tobias Brunner <tobias@strongswan.org>
Reviewed-by: David Ahern <dsahern@kernel.org>
Reviewed-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Link: https://lore.kernel.org/r/c5d9a947-eb19-4164-ac99-468ea814ce20@strongswan.org


Signed-off-by: Paolo Abeni <pabeni@redhat.com>

A failure during registration of the netdev notifier was not handled at
all. A failure during netlink initialization did not unregister the netdev
notifier.

Handle failures of netdev notifier registration and netlink initialization.
Both functions should only return negative values on failure and thereby
lead to the hsr module not being loaded.

Fixes: f421436a

 ("net/hsr: Add support for the High-availability Seamless Redundancy protocol (HSRv0)")
Signed-off-by: Felix Maurer <fmaurer@redhat.com>
Reviewed-by: Shigeru Yoshida <syoshida@redhat.com>
Reviewed-by: Breno Leitao <leitao@debian.org>
Link: https://lore.kernel.org/r/3ce097c15e3f7ace98fc7fd9bcbf299f092e63d1.1710504184.git.fmaurer@redhat.com


Signed-off-by: Paolo Abeni <pabeni@redhat.com>

acquire/release_in_xmit() work as bit lock in rds_send_xmit(), so they
are expected to ensure acquire/release memory ordering semantics.
However, test_and_set_bit/clear_bit() don't imply such semantics, on
top of this, following smp_mb__after_atomic() does not guarantee release
ordering (memory barrier actually should be placed before clear_bit()).

Instead, we use clear_bit_unlock/test_and_set_bit_lock() here.

Fixes: 0f4b1c7e ("rds: fix rds_send_xmit() serialization")
Fixes: 1f9ecd7e

 ("RDS: Pass rds_conn_path to rds_send_xmit()")
Signed-off-by: Yewon Choi <woni9911@gmail.com>
Reviewed-by: Michal Kubiak <michal.kubiak@intel.com>
Link: https://lore.kernel.org/r/ZfQUxnNTO9AJmzwc@libra05


Signed-off-by: Paolo Abeni <pabeni@redhat.com>

I "extracted" YNL C into a GitHub repo to make it easier
to use in other projects: https://github.com/linux-netdev/ynl-c

GitHub actions use Ubuntu by default, and the kernel headers
there are missing f329a0eb ("genetlink: correct uAPI defines").
Add the direct include workaround for nlctrl.

Fixes: 768e044a

 ("doc/netlink/specs: Add spec for nlctrl netlink family")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Link: https://lore.kernel.org/r/20240315002108.523232-1-kuba@kernel.org


Signed-off-by: Paolo Abeni <pabeni@redhat.com>

Jason A. Donenfeld says:

====================
wireguard fixes for 6.9-rc1

This series has four WireGuard fixes:

1) Annotate a data race that KCSAN found by using READ_ONCE/WRITE_ONCE,
   which has been causing syzkaller noise.

2) Use the generic netdev tstats allocation and stats getters instead of
   doing this within the driver.

3) Explicitly check a flag variable instead of an empty list in the
   netlink code, to prevent a UaF situation when paging through GET
   results during a remove-all SET operation.

4) Set a flag in the RISC-V CI config so the selftests continue to boot.
====================

Link: https://lore.kernel.org/r/20240314224911.6653-1-Jason@zx2c4.com


Signed-off-by: Paolo Abeni <pabeni@redhat.com>

This option is needed to continue booting with QEMU. Recent changes that
made this optional meant that it gets unset in the test harness, and so
WireGuard CI has been broken. Fix this by simply setting this option.

Cc: stable@vger.kernel.org
Fixes: 496ea826

 ("RISC-V: provide Kconfig & commandline options to control parsing "riscv,isa"")
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

The previous commit fixed a bug that led to a NULL peer->device being
dereferenced. It's actually easier and faster performance-wise to
instead get the device from ctx->wg. This semantically makes more sense
too, since ctx->wg->peer_allowedips.seq is compared with
ctx->allowedips_seq, basing them both in ctx. This also acts as a
defence in depth provision against freed peers.

Cc: stable@vger.kernel.org
Fixes: e7096c13

 ("net: WireGuard secure network tunnel")
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

If all peers are removed via wg_peer_remove_all(), rather than setting
peer_list to empty, the peer is added to a temporary list with a head on
the stack of wg_peer_remove_all(). If a netlink dump is resumed and the
cursored peer is one that has been removed via wg_peer_remove_all(), it
will iterate from that peer and then attempt to dump freed peers.

Fix this by instead checking peer->is_dead, which was explictly created
for this purpose. Also move up the device_update_lock lockdep assertion,
since reading is_dead relies on that.

It can be reproduced by a small script like:

    echo "Setting config..."
    ip link add dev wg0 type wireguard
    wg setconf wg0 /big-config
    (
            while true; do
                    echo "Showing config..."
                    wg showconf wg0 > /dev/null
            done
    ) &
    sleep 4
    wg setconf wg0 <(printf "[Peer]\nPublicKey=$(wg genkey)\n")

Resulting in:

    BUG: KASAN: slab-use-after-free in __lock_acquire+0x182a/0x1b20
    Read of size 8 at addr ffff88811956ec70 by task wg/59
    CPU: 2 PID: 59 Comm: wg Not tainted 6.8.0-rc2-debug+ #5
    Call Trace:
     <TASK>
     dump_stack_lvl+0x47/0x70
     print_address_description.constprop.0+0x2c/0x380
     print_report+0xab/0x250
     kasan_report+0xba/0xf0
     __lock_acquire+0x182a/0x1b20
     lock_acquire+0x191/0x4b0
     down_read+0x80/0x440
     get_peer+0x140/0xcb0
     wg_get_device_dump+0x471/0x1130

Cc: stable@vger.kernel.org
Fixes: e7096c13

 ("net: WireGuard secure network tunnel")
Reported-by: Lillian Berry <lillian@star-ark.net>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

Commit 3e2f544d

 ("net: get stats64 if device if driver is
configured") moved the callback to dev_get_tstats64() to net core, so,
unless the driver is doing some custom stats collection, it does not
need to set .ndo_get_stats64.

Since this driver is now relying in NETDEV_PCPU_STAT_TSTATS, then, it
doesn't need to set the dev_get_tstats64() generic .ndo_get_stats64
function pointer.

Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

With commit 34d21de9

 ("net: Move {l,t,d}stats allocation to core
and convert veth & vrf"), stats allocation could be done on net core
instead of in this driver.

With this new approach, the driver doesn't have to bother with error
handling (allocation failure checking, making sure free happens in the
right spot, etc). This is core responsibility now.

Remove the allocation in this driver and leverage the network core
allocation instead.

Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

Syzkaller with KCSAN identified a data-race issue when accessing
keypair->receiving_counter.counter. Use READ_ONCE() and WRITE_ONCE()
annotations to mark the data race as intentional.

    BUG: KCSAN: data-race in wg_packet_decrypt_worker / wg_packet_rx_poll

    write to 0xffff888107765888 of 8 bytes by interrupt on cpu 0:
     counter_validate drivers/net/wireguard/receive.c:321 [inline]
     wg_packet_rx_poll+0x3ac/0xf00 drivers/net/wireguard/receive.c:461
     __napi_poll+0x60/0x3b0 net/core/dev.c:6536
     napi_poll net/core/dev.c:6605 [inline]
     net_rx_action+0x32b/0x750 net/core/dev.c:6738
     __do_softirq+0xc4/0x279 kernel/softirq.c:553
     do_softirq+0x5e/0x90 kernel/softirq.c:454
     __local_bh_enable_ip+0x64/0x70 kernel/softirq.c:381
     __raw_spin_unlock_bh include/linux/spinlock_api_smp.h:167 [inline]
     _raw_spin_unlock_bh+0x36/0x40 kernel/locking/spinlock.c:210
     spin_unlock_bh include/linux/spinlock.h:396 [inline]
     ptr_ring_consume_bh include/linux/ptr_ring.h:367 [inline]
     wg_packet_decrypt_worker+0x6c5/0x700 drivers/net/wireguard/receive.c:499
     process_one_work kernel/workqueue.c:2633 [inline]
     ...

    read to 0xffff888107765888 of 8 bytes by task 3196 on cpu 1:
     decrypt_packet drivers/net/wireguard/receive.c:252 [inline]
     wg_packet_decrypt_worker+0x220/0x700 drivers/net/wireguard/receive.c:501
     process_one_work kernel/workqueue.c:2633 [inline]
     process_scheduled_works+0x5b8/0xa30 kernel/workqueue.c:2706
     worker_thread+0x525/0x730 kernel/workqueue.c:2787
     ...

Fixes: a9e90d99

 ("wireguard: noise: separate receive counter from send counter")
Reported-by:  <syzbot+d1de830e4ecdaac83d89@syzkaller.appspotmail.com>
Signed-off-by: Nikita Zhandarovich <n.zhandarovich@fintech.ru>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

dev->state can be read in rx and tx fast paths.

netif_running() which needs dev->state is called from
- enqueue_to_backlog() [RX path]
- __dev_direct_xmit()  [TX path]

Fixes: 43a71cd6

 ("net-device: reorganize net_device fast path variables")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Coco Li <lixiaoyan@google.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Link: https://lore.kernel.org/r/20240314200845.3050179-1-edumazet@google.com


Signed-off-by: Paolo Abeni <pabeni@redhat.com>

This reverts commit 885c36e5.

The patch currently broke the bpf selftest test_tc_dtime because
uapi field __sk_buff->tstamp_type depends on skb->mono_delivery_time which
does not necessarily mean mono with the original fix as the bit was re-used
for userspace timestamp as well to avoid tstamp reset in the forwarding
path. To solve this we need to keep mono_delivery_time as is and
introduce another bit called user_delivery_time and fall back to the
initial proposal of setting the user_delivery_time bit based on
sk_clockid set from userspace.

Fixes: 885c36e5 ("net: Re-use and set mono_delivery_time bit for userspace tstamp packets")
Link: https://lore.kernel.org/netdev/bc037db4-58bb-4861-ac31-a361a93841d3@linux.dev/


Signed-off-by: Abhishek Chauhan <quic_abchauha@quicinc.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Martin KaFai Lau <martin.lau@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

On MT7530, the HT_XTAL_FSEL field of the HWTRAP register stores a 2-bit
value that represents the frequency of the crystal oscillator connected to
the switch IC. The field is populated by the state of the ESW_P4_LED_0 and
ESW_P4_LED_0 pins, which is done right after reset is deasserted.

  ESW_P4_LED_0    ESW_P3_LED_0    Frequency
  -----------------------------------------
  0               0               Reserved
  0               1               20MHz
  1               0               40MHz
  1               1               25MHz

On MT7531, the XTAL25 bit of the STRAP register stores this. The LAN0LED0
pin is used to populate the bit. 25MHz when the pin is high, 40MHz when
it's low.

These pins are also used with LEDs, therefore, their state can be set to
something other than the bootstrapping configuration. For example, a link
may be established on port 3 before the DSA subdriver takes control of the
switch which would set ESW_P3_LED_0 to high.

Currently on mt7530_setup() and mt7531_setup(), 1000 - 1100 usec delay is
described between reset assertion and deassertion. Some switch ICs in real
life conditions cannot always have these pins set back to the bootstrapping
configuration before reset deassertion in this amount of delay. This causes
wrong crystal frequency to be selected which puts the switch in a
nonfunctional state after reset deassertion.

The tests below are conducted on an MT7530 with a 40MHz crystal oscillator
by Justin Swartz.

With a cable from an active peer connected to port 3 before reset, an
incorrect crystal frequency (0b11 = 25MHz) is selected:

                      [1]                  [3]     [5]
                      :                    :       :
              _____________________________         __________________
ESW_P4_LED_0                               |_______|
              _____________________________
ESW_P3_LED_0                               |__________________________

                       :                  : :     :
                       :                  : [4]...:
                       :                  :
                       [2]................:

[1] Reset is asserted.
[2] Period of 1000 - 1100 usec.
[3] Reset is deasserted.
[4] Period of 315 usec. HWTRAP register is populated with incorrect
    XTAL frequency.
[5] Signals reflect the bootstrapped configuration.

Increase the delay between reset_control_assert() and
reset_control_deassert(), and gpiod_set_value_cansleep(priv->reset, 0) and
gpiod_set_value_cansleep(priv->reset, 1) to 5000 - 5100 usec. This amount
ensures a higher possibility that the switch IC will have these pins back
to the bootstrapping configuration before reset deassertion.

With a cable from an active peer connected to port 3 before reset, the
correct crystal frequency (0b10 = 40MHz) is selected:

                      [1]        [2-1]     [3]     [5]
                      :          :         :       :
              _____________________________         __________________
ESW_P4_LED_0                               |_______|
              ___________________           _______
ESW_P3_LED_0                     |_________|       |__________________

                       :          :       : :     :
                       :          [2-2]...: [4]...:
                       [2]................:

[1] Reset is asserted.
[2] Period of 5000 - 5100 usec.
[2-1] ESW_P3_LED_0 goes low.
[2-2] Remaining period of 5000 - 5100 usec.
[3] Reset is deasserted.
[4] Period of 310 usec. HWTRAP register is populated with bootstrapped
    XTAL frequency.
[5] Signals reflect the bootstrapped configuration.

ESW_P3_LED_0 low period before reset deassertion:

              5000 usec
            - 5100 usec
    TEST     RESET HOLD
       #         (usec)
  ---------------------
       1           5410
       2           5440
       3           4375
       4           5490
       5           5475
       6           4335
       7           4370
       8           5435
       9           4205
      10           4335
      11           3750
      12           3170
      13           4395
      14           4375
      15           3515
      16           4335
      17           4220
      18           4175
      19           4175
      20           4350

     Min           3170
     Max           5490

  Median       4342.500
     Avg       4466.500

Revert commit 2920dd92 ("net: dsa: mt7530: disable LEDs before reset").
Changing the state of pins via reset assertion is simpler and more
efficient than doing so by setting the LED controller off.

Fixes: b8f126a8 ("net-next: dsa: add dsa support for Mediatek MT7530 switch")
Fixes: c288575f

 ("net: dsa: mt7530: Add the support of MT7531 switch")
Co-developed-by: Justin Swartz <justin.swartz@risingedge.co.za>
Signed-off-by: Justin Swartz <justin.swartz@risingedge.co.za>
Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Ignat Korchagin says:

====================
net: veth: ability to toggle GRO and XDP independently

It is rather confusing that GRO is automatically enabled, when an XDP program
is attached to a veth interface. Moreover, it is not possible to disable GRO
on a veth, if an XDP program is attached (which might be desirable in some use
cases).

Make GRO and XDP independent for a veth interface.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

We should be able to independently flip either XDP or GRO states and toggling
one should not affect the other.

Adjust other tests as well that had implicit expectation that GRO would be
automatically enabled.

Signed-off-by: Ignat Korchagin <ignat@cloudflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Commit d3256efd ("veth: allow enabling NAPI even without XDP") tried to fix
the fact that GRO was not possible without XDP, because veth did not use NAPI
without XDP. However, it also introduced the behaviour that GRO is always
enabled, when XDP is enabled.

While it might be desired for most cases, it is confusing for the user at best
as the GRO flag suddenly changes, when an XDP program is attached. It also
introduces some complexities in state management as was partially addressed in
commit fe9f8013 ("net: veth: clear GRO when clearing XDP even when down").

But the biggest problem is that it is not possible to disable GRO at all, when
an XDP program is attached, which might be needed for some use cases.

Fix this by not touching the GRO flag on XDP enable/disable as the code already
supports switching to NAPI if either GRO or XDP is requested.

Link: https://lore.kernel.org/lkml/20240311124015.38106-1-ignat@cloudflare.com/
Fixes: d3256efd ("veth: allow enabling NAPI even without XDP")
Fixes: fe9f8013

 ("net: veth: clear GRO when clearing XDP even when down")
Signed-off-by: Ignat Korchagin <ignat@cloudflare.com>
Reviewed-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

ignore_outgoing is read locklessly from dev_queue_xmit_nit()
and packet_getsockopt()

Add appropriate READ_ONCE()/WRITE_ONCE() annotations.

syzbot reported:

BUG: KCSAN: data-race in dev_queue_xmit_nit / packet_setsockopt

write to 0xffff888107804542 of 1 bytes by task 22618 on cpu 0:
 packet_setsockopt+0xd83/0xfd0 net/packet/af_packet.c:4003
 do_sock_setsockopt net/socket.c:2311 [inline]
 __sys_setsockopt+0x1d8/0x250 net/socket.c:2334
 __do_sys_setsockopt net/socket.c:2343 [inline]
 __se_sys_setsockopt net/socket.c:2340 [inline]
 __x64_sys_setsockopt+0x66/0x80 net/socket.c:2340
 do_syscall_64+0xd3/0x1d0
 entry_SYSCALL_64_after_hwframe+0x6d/0x75

read to 0xffff888107804542 of 1 bytes by task 27 on cpu 1:
 dev_queue_xmit_nit+0x82/0x620 net/core/dev.c:2248
 xmit_one net/core/dev.c:3527 [inline]
 dev_hard_start_xmit+0xcc/0x3f0 net/core/dev.c:3547
 __dev_queue_xmit+0xf24/0x1dd0 net/core/dev.c:4335
 dev_queue_xmit include/linux/netdevice.h:3091 [inline]
 batadv_send_skb_packet+0x264/0x300 net/batman-adv/send.c:108
 batadv_send_broadcast_skb+0x24/0x30 net/batman-adv/send.c:127
 batadv_iv_ogm_send_to_if net/batman-adv/bat_iv_ogm.c:392 [inline]
 batadv_iv_ogm_emit net/batman-adv/bat_iv_ogm.c:420 [inline]
 batadv_iv_send_outstanding_bat_ogm_packet+0x3f0/0x4b0 net/batman-adv/bat_iv_ogm.c:1700
 process_one_work kernel/workqueue.c:3254 [inline]
 process_scheduled_works+0x465/0x990 kernel/workqueue.c:3335
 worker_thread+0x526/0x730 kernel/workqueue.c:3416
 kthread+0x1d1/0x210 kernel/kthread.c:388
 ret_from_fork+0x4b/0x60 arch/x86/kernel/process.c:147
 ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:243

value changed: 0x00 -> 0x01

Reported by Kernel Concurrency Sanitizer on:
CPU: 1 PID: 27 Comm: kworker/u8:1 Tainted: G        W          6.8.0-syzkaller-08073-g480e035fc4c7 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 02/29/2024
Workqueue: bat_events batadv_iv_send_outstanding_bat_ogm_packet

Fixes: fa788d98

 ("packet: add sockopt to ignore outgoing packets")
Reported-by:  <syzbot+c669c1136495a2e7c31f@syzkaller.appspotmail.com>
Closes: https://lore.kernel.org/netdev/CANn89i+Z7MfbkBLOv=p7KZ7=K1rKHO4P1OL5LYDCtBiyqsa9oQ@mail.gmail.com/T/#t


Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Willem de Bruijn <willemdebruijn.kernel@gmail.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Reviewed-by: Jason Xing <kerneljasonxing@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The fsl_qmc_driver does not compile as module:
  error: ‘qmc_hdlc_driver’ undeclared here (not in a function);
    405 | MODULE_DEVICE_TABLE(of, qmc_hdlc_driver);
        |                         ^~~~~~~~~~~~~~~

Fix the typo.

Fixes: b40f00ecd463 ("net: wan: Add support for QMC HDLC")
Reported-by: Michael Ellerman <mpe@ellerman.id.au>
Closes: https://lore.kernel.org/linux-kernel/87ttl93f7i.fsf@mail.lhotse/


Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

A patch to resolve an issue was found in MediaTek's GPL-licensed SDK:
In the mtk_ppe_stop() function, the PPE scan mode is not disabled before
disabling the PPE. This can potentially lead to a hang during the process
of disabling the PPE.

Without this patch, the PPE may experience a hang during the reboot test.

Link: https://git01.mediatek.com/plugins/gitiles/openwrt/feeds/mtk-openwrt-feeds/+/b40da332dfe763932a82f9f62a4709457a15dd6c
Fixes: ba37b7ca

 ("net: ethernet: mtk_eth_soc: add support for initializing the PPE")
Suggested-by: Bc-bocun Chen <bc-bocun.chen@mediatek.com>
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Clearing bit MAC_MCR_FORCE_LINK which forces the link down too early
can result in MAC ending up in a broken/blocked state.

Fix this by handling this bit in the .mac_link_up and .mac_link_down
calls instead of in .mac_finish.

Fixes: b8fc9f30

 ("net: ethernet: mediatek: Add basic PHYLINK support")
Suggested-by: Mason-cw Chang <Mason-cw.Chang@mediatek.com>
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

The only user of these was io_uring, and it's not using them anymore.
Make them static and remove them from the socket header file.

Signed-off-by: Jens Axboe <axboe@kernel.dk>
Link: https://lore.kernel.org/r/1b6089d3-c1cf-464a-abd3-b0f0b6bb2523@kernel.dk


Signed-off-by: Jakub Kicinski <kuba@kernel.org>

txgbe register clk which name is i2c_designware.pci_dev_id(),
clk_name will be stored in clk_lookup_alloc. If PCIe bus number
is larger than 0x39, clk_name size will be larger than 20 bytes.
It exceeds clk_lookup_alloc MAX_DEV_ID limits. So the driver
shortened clk_name.

Fixes: b63f2048

 ("net: txgbe: Register fixed rate clock")
Signed-off-by: Duanqiang Wen <duanqiangwen@net-swift.com>
Reviewed-by: Michal Kubiak <michal.kubiak@intel.com>
Link: https://lore.kernel.org/r/20240313080634.459523-1-duanqiangwen@net-swift.com


Signed-off-by: Paolo Abeni <pabeni@redhat.com>

Stephen reports new warnings in the docs:

Documentation/networking/multi-pf-netdev.rst:94: ERROR: Unexpected indentation.
Documentation/networking/multi-pf-netdev.rst:106: ERROR: Unexpected indentation.

Fixes: 77d9ec3f

 ("Documentation: networking: Add description for multi-pf netdev")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Link: https://lore.kernel.org/all/20240312153304.0ef1b78e@canb.auug.org.au/


Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://lore.kernel.org/r/20240313032329.3919036-1-kuba@kernel.org


Signed-off-by: Paolo Abeni <pabeni@redhat.com>

David Howells says:

====================
rxrpc: Fixes for AF_RXRPC

Here are a couple of fixes for the AF_RXRPC changes[1] in net-next.

 (1) Fix a runtime warning introduced by a patch that changed how
     page_frag_alloc_align() works.

 (2) Fix an is-NULL vs IS_ERR error handling bug.

The patches are tagged here:

	git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs.git tags/rxrpc-iothread-20240312

And can be found on this branch:

	http://git.kernel.org/cgit/linux/kernel/git/dhowells/linux-fs.git/log/?h=rxrpc-iothread

Link: https://lore.kernel.org/r/20240306000655.1100294-1-dhowells@redhat.com/ [1]
====================

Link: https://lore.kernel.org/r/20240312233723.2984928-1-dhowells@redhat.com


Signed-off-by: Paolo Abeni <pabeni@redhat.com>

rxrpc_alloc_*_txbuf() and ->alloc_txbuf() return NULL to indicate no
memory, but rxrpc_send_data() uses IS_ERR().

Fix rxrpc_send_data() to check for NULL only and set -ENOMEM if it sees
that.

Fixes: 49489bb0

 ("rxrpc: Do zerocopy using MSG_SPLICE_PAGES and page frags")
Signed-off-by: David Howells <dhowells@redhat.com>
Reported-by: Marc Dionne <marc.dionne@auristor.com>
cc: "David S. Miller" <davem@davemloft.net>
cc: Eric Dumazet <edumazet@google.com>
cc: Jakub Kicinski <kuba@kernel.org>
cc: Paolo Abeni <pabeni@redhat.com>
cc: linux-afs@lists.infradead.org
cc: netdev@vger.kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

Commit 411c5f36 ("mm/page_alloc: modify page_frag_alloc_align() to
accept align as an argument") changed the way page_frag_alloc_align()
worked, but it didn't fix AF_RXRPC as that use of that allocator function
hadn't been merged yet at the time.  Now, when the AFS filesystem is used,
this results in:

  WARNING: CPU: 4 PID: 379 at include/linux/gfp.h:323 rxrpc_alloc_data_txbuf+0x9d/0x2b0 [rxrpc]

Fix this by using __page_frag_alloc_align() instead.

Note that it might be better to use an order-based alignment rather than a
mask-based alignment.

Fixes: 49489bb0

 ("rxrpc: Do zerocopy using MSG_SPLICE_PAGES and page frags")
Signed-off-by: David Howells <dhowells@redhat.com>
Reported-by: Marc Dionne <marc.dionne@auristor.com>
cc: Yunsheng Lin <linyunsheng@huawei.com>
cc: Alexander Duyck <alexander.duyck@gmail.com>
cc: Michael S. Tsirkin <mst@redhat.com>
cc: "David S. Miller" <davem@davemloft.net>
cc: Eric Dumazet <edumazet@google.com>
cc: Jakub Kicinski <kuba@kernel.org>
cc: Paolo Abeni <pabeni@redhat.com>
cc: linux-afs@lists.infradead.org
cc: netdev@vger.kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

KMSAN reported the following uninit-value access issue [1]:

=====================================================
BUG: KMSAN: uninit-value in hsr_get_node+0xa2e/0xa40 net/hsr/hsr_framereg.c:246
 hsr_get_node+0xa2e/0xa40 net/hsr/hsr_framereg.c:246
 fill_frame_info net/hsr/hsr_forward.c:577 [inline]
 hsr_forward_skb+0xe12/0x30e0 net/hsr/hsr_forward.c:615
 hsr_dev_xmit+0x1a1/0x270 net/hsr/hsr_device.c:223
 __netdev_start_xmit include/linux/netdevice.h:4940 [inline]
 netdev_start_xmit include/linux/netdevice.h:4954 [inline]
 xmit_one net/core/dev.c:3548 [inline]
 dev_hard_start_xmit+0x247/0xa10 net/core/dev.c:3564
 __dev_queue_xmit+0x33b8/0x5130 net/core/dev.c:4349
 dev_queue_xmit include/linux/netdevice.h:3134 [inline]
 packet_xmit+0x9c/0x6b0 net/packet/af_packet.c:276
 packet_snd net/packet/af_packet.c:3087 [inline]
 packet_sendmsg+0x8b1d/0x9f30 net/packet/af_packet.c:3119
 sock_sendmsg_nosec net/socket.c:730 [inline]
 __sock_sendmsg net/socket.c:745 [inline]
 __sys_sendto+0x735/0xa10 net/socket.c:2191
 __do_sys_sendto net/socket.c:2203 [inline]
 __se_sys_sendto net/socket.c:2199 [inline]
 __x64_sys_sendto+0x125/0x1c0 net/socket.c:2199
 do_syscall_x64 arch/x86/entry/common.c:52 [inline]
 do_syscall_64+0x6d/0x140 arch/x86/entry/common.c:83
 entry_SYSCALL_64_after_hwframe+0x63/0x6b

Uninit was created at:
 slab_post_alloc_hook+0x129/0xa70 mm/slab.h:768
 slab_alloc_node mm/slub.c:3478 [inline]
 kmem_cache_alloc_node+0x5e9/0xb10 mm/slub.c:3523
 kmalloc_reserve+0x13d/0x4a0 net/core/skbuff.c:560
 __alloc_skb+0x318/0x740 net/core/skbuff.c:651
 alloc_skb include/linux/skbuff.h:1286 [inline]
 alloc_skb_with_frags+0xc8/0xbd0 net/core/skbuff.c:6334
 sock_alloc_send_pskb+0xa80/0xbf0 net/core/sock.c:2787
 packet_alloc_skb net/packet/af_packet.c:2936 [inline]
 packet_snd net/packet/af_packet.c:3030 [inline]
 packet_sendmsg+0x70e8/0x9f30 net/packet/af_packet.c:3119
 sock_sendmsg_nosec net/socket.c:730 [inline]
 __sock_sendmsg net/socket.c:745 [inline]
 __sys_sendto+0x735/0xa10 net/socket.c:2191
 __do_sys_sendto net/socket.c:2203 [inline]
 __se_sys_sendto net/socket.c:2199 [inline]
 __x64_sys_sendto+0x125/0x1c0 net/socket.c:2199
 do_syscall_x64 arch/x86/entry/common.c:52 [inline]
 do_syscall_64+0x6d/0x140 arch/x86/entry/common.c:83
 entry_SYSCALL_64_after_hwframe+0x63/0x6b

CPU: 1 PID: 5033 Comm: syz-executor334 Not tainted 6.7.0-syzkaller-00562-g9f8413c4a66f #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 11/17/2023
=====================================================

If the packet type ID field in the Ethernet header is either ETH_P_PRP or
ETH_P_HSR, but it is not followed by an HSR tag, hsr_get_skb_sequence_nr()
reads an invalid value as a sequence number. This causes the above issue.

This patch fixes the issue by returning NULL if the Ethernet header is not
followed by an HSR tag.

Fixes: f266a683

 ("net/hsr: Better frame dispatch")
Reported-and-tested-by:  <syzbot+2ef3a8ce8e91b5a50098@syzkaller.appspotmail.com>
Closes: https://syzkaller.appspot.com/bug?extid=2ef3a8ce8e91b5a50098

 [1]
Signed-off-by: Shigeru Yoshida <syoshida@redhat.com>
Link: https://lore.kernel.org/r/20240312152719.724530-1-syoshida@redhat.com


Signed-off-by: Paolo Abeni <pabeni@redhat.com>

Use rbi->len instead of rcd->len for non-dataring packet.

Found issue:
  XDP_WARN: xdp_update_frame_from_buff(line:278): Driver BUG: missing reserved tailroom
  WARNING: CPU: 0 PID: 0 at net/core/xdp.c:586 xdp_warn+0xf/0x20
  CPU: 0 PID: 0 Comm: swapper/0 Tainted: G        W  O       6.5.1 #1
  RIP: 0010:xdp_warn+0xf/0x20
  ...
  ? xdp_warn+0xf/0x20
  xdp_do_redirect+0x15f/0x1c0
  vmxnet3_run_xdp+0x17a/0x400 [vmxnet3]
  vmxnet3_process_xdp+0xe4/0x760 [vmxnet3]
  ? vmxnet3_tq_tx_complete.isra.0+0x21e/0x2c0 [vmxnet3]
  vmxnet3_rq_rx_complete+0x7ad/0x1120 [vmxnet3]
  vmxnet3_poll_rx_only+0x2d/0xa0 [vmxnet3]
  __napi_poll+0x20/0x180
  net_rx_action+0x177/0x390

Reported-by: Martin Zaharinov <micron10@gmail.com>
Tested-by: Martin Zaharinov <micron10@gmail.com>
Link: https://lore.kernel.org/netdev/74BF3CC8-2A3A-44FF-98C2-1E20F110A92E@gmail.com/
Fixes: 54f00cce

 ("vmxnet3: Add XDP support.")
Signed-off-by: William Tu <witu@nvidia.com>
Link: https://lore.kernel.org/r/20240309183147.28222-1-witu@nvidia.com


Signed-off-by: Paolo Abeni <pabeni@redhat.com>

syzbot reported a warning in sk_nulls_del_node_init_rcu().

The commit 66b60b0c

 ("dccp/tcp: Unhash sk from ehash for tb2 alloc
failure after check_estalblished().") tried to fix an issue that an
unconnected socket occupies an ehash entry when bhash2 allocation fails.

In such a case, we need to revert changes done by check_established(),
which does not hold refcnt when inserting socket into ehash.

So, to revert the change, we need to __sk_nulls_add_node_rcu() instead
of sk_nulls_add_node_rcu().

Otherwise, sock_put() will cause refcnt underflow and leak the socket.

[0]:
WARNING: CPU: 0 PID: 23948 at include/net/sock.h:799 sk_nulls_del_node_init_rcu+0x166/0x1a0 include/net/sock.h:799
Modules linked in:
CPU: 0 PID: 23948 Comm: syz-executor.2 Not tainted 6.8.0-rc6-syzkaller-00159-gc055fc00c07b #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/25/2024
RIP: 0010:sk_nulls_del_node_init_rcu+0x166/0x1a0 include/net/sock.h:799
Code: e8 7f 71 c6 f7 83 fb 02 7c 25 e8 35 6d c6 f7 4d 85 f6 0f 95 c0 5b 41 5c 41 5d 41 5e 41 5f 5d c3 cc cc cc cc e8 1b 6d c6 f7 90 <0f> 0b 90 eb b2 e8 10 6d c6 f7 4c 89 e7 be 04 00 00 00 e8 63 e7 d2
RSP: 0018:ffffc900032d7848 EFLAGS: 00010246
RAX: ffffffff89cd0035 RBX: 0000000000000001 RCX: 0000000000040000
RDX: ffffc90004de1000 RSI: 000000000003ffff RDI: 0000000000040000
RBP: 1ffff1100439ac26 R08: ffffffff89ccffe3 R09: 1ffff1100439ac28
R10: dffffc0000000000 R11: ffffed100439ac29 R12: ffff888021cd6140
R13: dffffc0000000000 R14: ffff88802a9bf5c0 R15: ffff888021cd6130
FS:  00007f3b823f16c0(0000) GS:ffff8880b9400000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f3b823f0ff8 CR3: 000000004674a000 CR4: 00000000003506f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
 <TASK>
 __inet_hash_connect+0x140f/0x20b0 net/ipv4/inet_hashtables.c:1139
 dccp_v6_connect+0xcb9/0x1480 net/dccp/ipv6.c:956
 __inet_stream_connect+0x262/0xf30 net/ipv4/af_inet.c:678
 inet_stream_connect+0x65/0xa0 net/ipv4/af_inet.c:749
 __sys_connect_file net/socket.c:2048 [inline]
 __sys_connect+0x2df/0x310 net/socket.c:2065
 __do_sys_connect net/socket.c:2075 [inline]
 __se_sys_connect net/socket.c:2072 [inline]
 __x64_sys_connect+0x7a/0x90 net/socket.c:2072
 do_syscall_64+0xf9/0x240
 entry_SYSCALL_64_after_hwframe+0x6f/0x77
RIP: 0033:0x7f3b8167dda9
Code: 28 00 00 00 75 05 48 83 c4 28 c3 e8 e1 20 00 00 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b0 ff ff ff f7 d8 64 89 01 48
RSP: 002b:00007f3b823f10c8 EFLAGS: 00000246 ORIG_RAX: 000000000000002a
RAX: ffffffffffffffda RBX: 00007f3b817abf80 RCX: 00007f3b8167dda9
RDX: 000000000000001c RSI: 0000000020000040 RDI: 0000000000000003
RBP: 00007f3b823f1120 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000001
R13: 000000000000000b R14: 00007f3b817abf80 R15: 00007ffd3beb57b8
 </TASK>

Reported-by:  <syzbot+12c506c1aae251e70449@syzkaller.appspotmail.com>
Closes: https://syzkaller.appspot.com/bug?extid=12c506c1aae251e70449
Fixes: 66b60b0c

 ("dccp/tcp: Unhash sk from ehash for tb2 alloc failure after check_estalblished().")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20240308201623.65448-1-kuniyu@amazon.com


Signed-off-by: Paolo Abeni <pabeni@redhat.com>

Commit 870c7ad4 ("devlink: protect devlink->dev by the instance
lock") added devlink instance locking inside a loop that iterates over
all the registered devlink instances on the machine in the pre-doit
phase. This can lead to serialization of devlink commands over
different devlink instances.

For example: While the first devlink instance is executing firmware
flash, all commands to other devlink instances on the machine are
forced to wait until the first devlink finishes.

Therefore, in the pre-doit phase, take the devlink instance lock only
for the devlink instance the command is targeting. Devlink layer is
taking a reference on the devlink instance, ensuring the devlink->dev
pointer is valid. This reference taking was introduced by commit
a3806872 ("devlink: take device reference for devlink object").
Without this commit, it would not be safe to access devlink->dev
lockless.

Fixes: 870c7ad4

 ("devlink: protect devlink->dev by the instance lock")
Signed-off-by: Shay Drory <shayd@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

taprio_parse_tc_entry() is not correctly checking
TCA_TAPRIO_TC_ENTRY_INDEX attribute:

	int tc; // Signed value

	tc = nla_get_u32(tb[TCA_TAPRIO_TC_ENTRY_INDEX]);
	if (tc >= TC_QOPT_MAX_QUEUE) {
		NL_SET_ERR_MSG_MOD(extack, "TC entry index out of range");
		return -ERANGE;
	}

syzbot reported that it could fed arbitary negative values:

UBSAN: shift-out-of-bounds in net/sched/sch_taprio.c:1722:18
shift exponent -2147418108 is negative
CPU: 0 PID: 5066 Comm: syz-executor367 Not tainted 6.8.0-rc7-syzkaller-00136-gc8a5c731fd12 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 02/29/2024
Call Trace:
 <TASK>
  __dump_stack lib/dump_stack.c:88 [inline]
  dump_stack_lvl+0x1e7/0x2e0 lib/dump_stack.c:106
  ubsan_epilogue lib/ubsan.c:217 [inline]
  __ubsan_handle_shift_out_of_bounds+0x3c7/0x420 lib/ubsan.c:386
  taprio_parse_tc_entry net/sched/sch_taprio.c:1722 [inline]
  taprio_parse_tc_entries net/sched/sch_taprio.c:1768 [inline]
  taprio_change+0xb87/0x57d0 net/sched/sch_taprio.c:1877
  taprio_init+0x9da/0xc80 net/sched/sch_taprio.c:2134
  qdisc_create+0x9d4/0x1190 net/sched/sch_api.c:1355
  tc_modify_qdisc+0xa26/0x1e40 net/sched/sch_api.c:1776
  rtnetlink_rcv_msg+0x885/0x1040 net/core/rtnetlink.c:6617
  netlink_rcv_skb+0x1e3/0x430 net/netlink/af_netlink.c:2543
  netlink_unicast_kernel net/netlink/af_netlink.c:1341 [inline]
  netlink_unicast+0x7ea/0x980 net/netlink/af_netlink.c:1367
  netlink_sendmsg+0xa3b/0xd70 net/netlink/af_netlink.c:1908
  sock_sendmsg_nosec net/socket.c:730 [inline]
  __sock_sendmsg+0x221/0x270 net/socket.c:745
  ____sys_sendmsg+0x525/0x7d0 net/socket.c:2584
  ___sys_sendmsg net/socket.c:2638 [inline]
  __sys_sendmsg+0x2b0/0x3a0 net/socket.c:2667
 do_syscall_64+0xf9/0x240
 entry_SYSCALL_64_after_hwframe+0x6f/0x77
RIP: 0033:0x7f1b2dea3759
Code: 48 83 c4 28 c3 e8 d7 19 00 00 0f 1f 80 00 00 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b8 ff ff ff f7 d8 64 89 01 48
RSP: 002b:00007ffd4de452f8 EFLAGS: 00000246 ORIG_RAX: 000000000000002e
RAX: ffffffffffffffda RBX: 00007f1b2def0390 RCX: 00007f1b2dea3759
RDX: 0000000000000000 RSI: 00000000200007c0 RDI: 0000000000000004
RBP: 0000000000000003 R08: 0000555500000000 R09: 0000555500000000
R10: 0000555500000000 R11: 0000000000000246 R12: 00007ffd4de45340
R13: 00007ffd4de45310 R14: 0000000000000001 R15: 00007ffd4de45340

Fixes: a54fc09e

 ("net/sched: taprio: allow user input of per-tc max SDU")
Reported-and-tested-by:  <syzbot+a340daa06412d6028918@syzkaller.appspotmail.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Michal Kubiak <michal.kubiak@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Use wake_up API instead of wake_up_interruptible, since
wait_event_timeout API is used for waiting on command completion.

Fixes: 1463f382

 ("octeontx2-af: Add support for CGX link management")
Signed-off-by: Linu Cherian <lcherian@marvell.com>
Signed-off-by: Sunil Goutham <sgoutham@marvell.com>
Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

smp_call_function always runs its callback in hard IRQ context, even on
PREEMPT_RT, where spinlocks can sleep. So we need to use a raw spinlock
for cgr_lock to ensure we aren't waiting on a sleeping task.

Although this bug has existed for a while, it was not apparent until
commit ef2a8d54 ("net: dpaa: Adjust queue depth on rate change")
which invokes smp_call_function_single via qman_update_cgr_safe every
time a link goes up or down.

Fixes: 96f413f4

 ("soc/fsl/qbman: fix issue in qman_delete_cgr_safe()")
CC: stable@vger.kernel.org
Reported-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Closes: https://lore.kernel.org/all/20230323153935.nofnjucqjqnz34ej@skbuf/


Reported-by: Steffen Trumtrar <s.trumtrar@pengutronix.de>
Closes: https://lore.kernel.org/linux-arm-kernel/87wmsyvclu.fsf@pengutronix.de/


Signed-off-by: Sean Anderson <sean.anderson@linux.dev>
Reviewed-by: Camelia Groza <camelia.groza@nxp.com>
Tested-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

smp_call_function_single disables IRQs when executing the callback. To
prevent deadlocks, we must disable IRQs when taking cgr_lock elsewhere.
This is already done by qman_update_cgr and qman_delete_cgr; fix the
other lockers.

Fixes: 96f413f4

 ("soc/fsl/qbman: fix issue in qman_delete_cgr_safe()")
CC: stable@vger.kernel.org
Signed-off-by: Sean Anderson <sean.anderson@linux.dev>
Reviewed-by: Camelia Groza <camelia.groza@nxp.com>
Tested-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Kuniyuki Iwashima says:

====================
tcp/rds: Fix use-after-free around kernel TCP reqsk.

syzkaller reported an warning of netns ref tracker for RDS TCP listener,
which commit 740ea3c4 ("tcp: Clean up kernel listener's reqsk in
inet_twsk_purge()") fixed for per-netns ehash.

This series fixes the bug in the partial fix and fixes the reported bug
in the global ehash.

v4: https://lore.kernel.org/netdev/20240307232151.55963-1-kuniyu@amazon.com/
v3: https://lore.kernel.org/netdev/20240307224423.53315-1-kuniyu@amazon.com/
v2: https://lore.kernel.org/netdev/20240227011041.97375-1-kuniyu@amazon.com/
v1: https://lore.kernel.org/netdev/20240223172448.94084-1-kuniyu@amazon.com/
====================

Link: https://lore.kernel.org/r/20240308200122.64357-1-kuniyu@amazon.com


Signed-off-by: Jakub Kicinski <kuba@kernel.org>

syzkaller reported a warning of netns tracker [0] followed by KASAN
splat [1] and another ref tracker warning [1].

syzkaller could not find a repro, but in the log, the only suspicious
sequence was as follows:

  18:26:22 executing program 1:
  r0 = socket$inet6_mptcp(0xa, 0x1, 0x106)
  ...
  connect$inet6(r0, &(0x7f0000000080)={0xa, 0x4001, 0x0, @loopback}, 0x1c) (async)

The notable thing here is 0x4001 in connect(), which is RDS_TCP_PORT.

So, the scenario would be:

  1. unshare(CLONE_NEWNET) creates a per netns tcp listener in
      rds_tcp_listen_init().
  2. syz-executor connect()s to it and creates a reqsk.
  3. syz-executor exit()s immediately.
  4. netns is dismantled.  [0]
  5. reqsk timer is fired, and UAF happens while freeing reqsk.  [1]
  6. listener is freed after RCU grace period.  [2]

Basically, reqsk assumes that the listener guarantees netns safety
until all reqsk timers are expired by holding the listener's refcount.
However, this was not the case for kernel sockets.

Commit 740ea3c4

 ("tcp: Clean up kernel listener's reqsk in
inet_twsk_purge()") fixed this issue only for per-netns ehash.

Let's apply the same fix for the global ehash.

[0]:
ref_tracker: net notrefcnt@0000000065449cc3 has 1/1 users at
     sk_alloc (./include/net/net_namespace.h:337 net/core/sock.c:2146)
     inet6_create (net/ipv6/af_inet6.c:192 net/ipv6/af_inet6.c:119)
     __sock_create (net/socket.c:1572)
     rds_tcp_listen_init (net/rds/tcp_listen.c:279)
     rds_tcp_init_net (net/rds/tcp.c:577)
     ops_init (net/core/net_namespace.c:137)
     setup_net (net/core/net_namespace.c:340)
     copy_net_ns (net/core/net_namespace.c:497)
     create_new_namespaces (kernel/nsproxy.c:110)
     unshare_nsproxy_namespaces (kernel/nsproxy.c:228 (discriminator 4))
     ksys_unshare (kernel/fork.c:3429)
     __x64_sys_unshare (kernel/fork.c:3496)
     do_syscall_64 (arch/x86/entry/common.c:52 arch/x86/entry/common.c:83)
     entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:129)
...
WARNING: CPU: 0 PID: 27 at lib/ref_tracker.c:179 ref_tracker_dir_exit (lib/ref_tracker.c:179)

[1]:
BUG: KASAN: slab-use-after-free in inet_csk_reqsk_queue_drop (./include/net/inet_hashtables.h:180 net/ipv4/inet_connection_sock.c:952 net/ipv4/inet_connection_sock.c:966)
Read of size 8 at addr ffff88801b370400 by task swapper/0/0
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.0-0-gd239552ce722-prebuilt.qemu.org 04/01/2014
Call Trace:
 <IRQ>
 dump_stack_lvl (lib/dump_stack.c:107 (discriminator 1))
 print_report (mm/kasan/report.c:378 mm/kasan/report.c:488)
 kasan_report (mm/kasan/report.c:603)
 inet_csk_reqsk_queue_drop (./include/net/inet_hashtables.h:180 net/ipv4/inet_connection_sock.c:952 net/ipv4/inet_connection_sock.c:966)
 reqsk_timer_handler (net/ipv4/inet_connection_sock.c:979 net/ipv4/inet_connection_sock.c:1092)
 call_timer_fn (./arch/x86/include/asm/jump_label.h:27 ./include/linux/jump_label.h:207 ./include/trace/events/timer.h:127 kernel/time/timer.c:1701)
 __run_timers.part.0 (kernel/time/timer.c:1752 kernel/time/timer.c:2038)
 run_timer_softirq (kernel/time/timer.c:2053)
 __do_softirq (./arch/x86/include/asm/jump_label.h:27 ./include/linux/jump_label.h:207 ./include/trace/events/irq.h:142 kernel/softirq.c:554)
 irq_exit_rcu (kernel/softirq.c:427 kernel/softirq.c:632 kernel/softirq.c:644)
 sysvec_apic_timer_interrupt (arch/x86/kernel/apic/apic.c:1076 (discriminator 14))
 </IRQ>

Allocated by task 258 on cpu 0 at 83.612050s:
 kasan_save_stack (mm/kasan/common.c:48)
 kasan_save_track (mm/kasan/common.c:68)
 __kasan_slab_alloc (mm/kasan/common.c:343)
 kmem_cache_alloc (mm/slub.c:3813 mm/slub.c:3860 mm/slub.c:3867)
 copy_net_ns (./include/linux/slab.h:701 net/core/net_namespace.c:421 net/core/net_namespace.c:480)
 create_new_namespaces (kernel/nsproxy.c:110)
 unshare_nsproxy_namespaces (kernel/nsproxy.c:228 (discriminator 4))
 ksys_unshare (kernel/fork.c:3429)
 __x64_sys_unshare (kernel/fork.c:3496)
 do_syscall_64 (arch/x86/entry/common.c:52 arch/x86/entry/common.c:83)
 entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:129)

Freed by task 27 on cpu 0 at 329.158864s:
 kasan_save_stack (mm/kasan/common.c:48)
 kasan_save_track (mm/kasan/common.c:68)
 kasan_save_free_info (mm/kasan/generic.c:643)
 __kasan_slab_free (mm/kasan/common.c:265)
 kmem_cache_free (mm/slub.c:4299 mm/slub.c:4363)
 cleanup_net (net/core/net_namespace.c:456 net/core/net_namespace.c:446 net/core/net_namespace.c:639)
 process_one_work (kernel/workqueue.c:2638)
 worker_thread (kernel/workqueue.c:2700 kernel/workqueue.c:2787)
 kthread (kernel/kthread.c:388)
 ret_from_fork (arch/x86/kernel/process.c:153)
 ret_from_fork_asm (arch/x86/entry/entry_64.S:250)

The buggy address belongs to the object at ffff88801b370000
 which belongs to the cache net_namespace of size 4352
The buggy address is located 1024 bytes inside of
 freed 4352-byte region [ffff88801b370000, ffff88801b371100)

[2]:
WARNING: CPU: 0 PID: 95 at lib/ref_tracker.c:228 ref_tracker_free (lib/ref_tracker.c:228 (discriminator 1))
Modules linked in:
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.0-0-gd239552ce722-prebuilt.qemu.org 04/01/2014
RIP: 0010:ref_tracker_free (lib/ref_tracker.c:228 (discriminator 1))
...
Call Trace:
<IRQ>
 __sk_destruct (./include/net/net_namespace.h:353 net/core/sock.c:2204)
 rcu_core (./arch/x86/include/asm/preempt.h:26 kernel/rcu/tree.c:2165 kernel/rcu/tree.c:2433)
 __do_softirq (./arch/x86/include/asm/jump_label.h:27 ./include/linux/jump_label.h:207 ./include/trace/events/irq.h:142 kernel/softirq.c:554)
 irq_exit_rcu (kernel/softirq.c:427 kernel/softirq.c:632 kernel/softirq.c:644)
 sysvec_apic_timer_interrupt (arch/x86/kernel/apic/apic.c:1076 (discriminator 14))
</IRQ>

Reported-by: syzkaller <syzkaller@googlegroups.com>
Suggested-by: Eric Dumazet <edumazet@google.com>
Fixes: 467fa153

 ("RDS-TCP: Support multiple RDS-TCP listen endpoints, one per netns.")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20240308200122.64357-3-kuniyu@amazon.com


Signed-off-by: Jakub Kicinski <kuba@kernel.org>