- Mar 16, 2024
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linuxLinus Torvalds authored
Pull i2c updates from Wolfram Sang: "Minor changes to the I2C core. Most changes are in drivers: The i801 and designware drivers received most of the changes, including refactorings and some additions. Recovery changes for the iMX and iMX-LPI2C are now utilizing the generic i2c support. The Cadence driver now supports system suspend and resume. The hisi, mpc, sh_mobile, and npcm drivers have undergone some cleanups and improvements. Meanwhile, Uwe continues his work on converting the "remove" callback to become a void function. The pca954x mux driver now supports additional configurations, such as isolating faulty channels and flushing stuck buses, among others. Support has been added for Renesas r8a779h0, i.MX95 LPI2C, and Microchip sam9x7. Meanwhile, Geert lays the groundwork for the upcoming R-Car Gen4" * tag 'i2c-for-6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (34 commits) i2c: sprd: Convert to platform remove callback returning void Documentation: i2c: Document that client auto-detection is a legacy mechanism i2c: remove redundant condition i2c: rcar: Prepare for the advent of ARCH_RCAR_GEN4 i2c: imx-lpi2c: add generic GPIO recovery for LPI2C i2c: cadence: Add system suspend and resume PM support i2c: mpc: remove outdated macro i2c: mpc: use proper binding for transfer timeouts dt-bindings: i2c: mpc: use proper binding for transfer timeouts i2c: smbus: Prepare i2c_register_spd for usage on muxed segments i2c: constify the struct device_type usage i2c: designware: Implement generic polling mode code for Wangxun 10Gb NIC i2c: designware: Fix RX FIFO depth define on Wangxun 10Gb NIC i2c: designware: Move interrupt handling functions before i2c_dw_xfer() i2c: designware: Use accessors to DW_IC_INTR_MASK register i2c: designware: Do not enable interrupts shortly in polling mode i2c: designware: Uniform initialization flow for polling mode dt-bindings: i2c: at91: Add sam9x7 compatible string dt-bindings: i2c: imx-lpi2c: add i.MX95 LPI2C i2c: Remove redundant comparison in npcm_i2c_reg_slave ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimmLinus Torvalds authored
Pull libnvdimm updates from Dave Jiang: - ACPI_NFIT Kconfig documetation fix - Make nvdimm_bus_type const - Make dax_bus_type const - remove SLAB_MEM_SPREAD flag usage in DAX * tag 'libnvdimm-for-6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm: dax: remove SLAB_MEM_SPREAD flag usage device-dax: make dax_bus_type const nvdimm: make nvdimm_bus_type const libnvdimm: Fix ACPI_NFIT in BLK_DEV_PMEM help
-
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linuxLinus Torvalds authored
Pull clk updates from Stephen Boyd: "Not a ton of stuff happening in the clk framework. We got some more devm helpers and we seem to be going in the direction of "just turn this stuff on already and leave me alone!" with the addition of a devm_clk_bulk_get_all_enable() API. I'm hoping that we can make that into a pmdomain that drivers attach instead, but this API should help drivers simplify in the meantime. Outside of the devm wrappers, we've got the usual clk driver updates that are dominated by the major phone SoC vendors (Samsung and Qualcomm) and the non-critical driver fixes for things like incorrect topology descriptions and wrong registers or bit fields. More details are below, but I'd say that it looks pretty ordinary. The only thing that really jumps out at me is the Renesas clk driver that's ignoring clks that are assigned to remote processors in DeviceTree. That's a new feature that they're using to avoid marking clks as CLK_IGNORE_UNUSED based on the configuration of the system. Core: - Increase dev_id len for clkdev lookups - Add a devm_clk_bulk_get_all_enable() API to get and enable all clks for a device - Add a devm variant of clk_rate_exclusive_get() New Drivers: - Display, TCSR, GPU, and Camera clock controllers for Qualcomm's X1 Elite SoC - Google GS101 PERIC0 and PERIC1 clock controllers - Exynos850 PDMA clocks - Exynos850 CPU cluster 0 and 1 (CMU_CPUCLK0/CMU_CPUCLK1) clock controllers Removed Drivers: - Remove the unused Qualcomm sc7180 modem clk driver Updates: - Fix some static checker errors in the Hisilicon clk driver - Polarfire MSSPLL hardware has 4 output clocks (the driver supported previously only one output); each of these 4 outputs feed dividers and the output of each divider feed individual hardware blocks (e.g. CAN, Crypto, eMMC); individual hardware block drivers need to control their clocks thus clock driver support was added for all MSSPLL output clocks - Typo fixes in the Qualcomm IPQ5018 GCC driver - Add "qdss_at" clk on Qualcomm IPQ6018, needed for WiFi - Properly terminate frequency tables in different Qualcomm clk drivers - Add MDSS, crypto, and SDCC resets on Qualcomm MSM8953 - Add missing UFS CLKREF clks on Qualcomm SC8180X - Avoid significant delays during boot by adding a softdep on rpmhpd to Qualcomm SDM845 gcc driver - Add QUPv3 RCGS w/ DFS and video resets to Qualcomm SM8150 GCC driver - Fix the custom GPU GX "do-nothing" method in the Qualcomm GDSC driver - Add an external regulator to GX GDSC on Qualcomm SC8280XP GPU clk driver - Switch display, GPU, video, and camera Qualcomm clk drivers to module_platform_driver() - Set a longer delay for Venus resets on many Qualcomm SoCs - Correct the GDSC wait times in the Qualcomm SDM845 display clk driver - Fix clock listing Oops on Amlogic axg - New pll-rate for Rockchip rk3568 - i2s rate improvements for Rockchip rk3399 - Rockchip rk3588 syscon clock fixes and removal of overall clock-number from the rk3588 binding header - A prerequisite for later improvements to the Rockchip rk3588 linked clocks - Minor clean-ups and error handling improvements in both composite-8m and SCU i.MX clock drivers - Fix for SAI_MCLK_SEL definition for i.MX8MP - Register the Samsung CMU MISC clock controller earlier, so the Multi Core Timer clocksource can use it on Google GS101 - Propagate Exynos850 SPI IPCLK rate change to parents, so the SPI will get proper clock rates - Refactor the generic Samsung CPU clock controllers code, preparing it for supporting Exynos850 CPU clocks - Fix some clk kerneldoc warnings - Add Ethernet, SDHI, DMA, and HyperFLASH/QSPI (RPC-IF) clocks on Renesas R-Car V4M - Ignore all clocks which are assigned to a non-Linux system in the Renesas clk driver - Add watchdog clock on Renesas RZ/G3S - Add camera (CRU) clock and reset on Renesas RZ/G2UL - Add support for the Renesas R-Car V4M (R8A779H0) SoC - Convert some clk bindings to YAML so they can be validated" * tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (150 commits) clk: zynq: Prevent null pointer dereference caused by kmalloc failure clk: fractional-divider: Use bit operations consistently clk: fractional-divider: Move mask calculations out of lock clk: Fix clk_core_get NULL dereference clk: starfive: jh7110-vout: Convert to platform remove callback returning void clk: starfive: jh7110-isp: Convert to platform remove callback returning void clk: imx: imx8-acm: Convert to platform remove callback returning void clk: qcom: gcc-ipq5018: fix register offset for GCC_UBI0_AXI_ARES reset clk: qcom: gcc-ipq5018: fix 'halt_reg' offset of 'gcc_pcie1_pipe_clk' clk: qcom: gcc-ipq5018: fix 'enable_reg' offset of 'gcc_gmac0_sys_clk' clk: qcom: camcc-x1e80100: Fix missing DT_IFACE enum in x1e80100 camcc clk: qcom: mmcc-msm8974: fix terminating of frequency table arrays clk: qcom: mmcc-apq8084: fix terminating of frequency table arrays clk: qcom: camcc-sc8280xp: fix terminating of frequency table arrays clk: qcom: gcc-ipq9574: fix terminating of frequency table arrays clk: qcom: gcc-ipq8074: fix terminating of frequency table arrays clk: qcom: gcc-ipq6018: fix terminating of frequency table arrays clk: qcom: gcc-ipq5018: fix terminating of frequency table arrays clk: mediatek: clk-mt8173-apmixedsys: Use common error handling code in clk_mt8173_apmixed_probe() clk: Add a devm variant of clk_rate_exclusive_get() ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-mediaLinus Torvalds authored
Pull media updates from Mauro Carvalho Chehab: - DVB budget legacy API was finally documented. It took only 20+ years to get some documentation about it... - hantro driver has gained support for STM32MP25 VDEC/VENC - rkisp1 has gained support for i.MX8MP - atomisp got rid of two items from its todo list. Still 5 items pending for moving it out of staging - lots of driver fixes, cleanups and improvements * tag 'media/v6.9-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (252 commits) media: rcar-isp: Disallow unbind of devices media: usbtv: Remove useless locks in usbtv_video_free() media: mediatek: vcodec: avoid -Wcast-function-type-strict warning media: ttpci: fix two memleaks in budget_av_attach media: go7007: fix a memleak in go7007_load_encoder media: dvb-frontends: avoid stack overflow warnings with clang media: pvrusb2: fix uaf in pvr2_context_set_notify media: usb: s2255: Refactor s2255_get_fx2fw media: ti: j721e-csi2rx: Convert to platform remove callback returning void media: stm32-dcmipp: Convert to platform remove callback returning void media: nxp: imx8-isi: Convert to platform remove callback returning void media: nuvoton: Convert to platform remove callback returning void media: chips-media: wave5: Convert to platform remove callback returning void media: chips-media: wave5: Remove unnecessary semicolons media: i2c: imx290: Fix IMX920 typo media: platform: replace of_graph_get_next_endpoint() media: i2c: replace of_graph_get_next_endpoint() media: ivsc: csi: Make use of sub-device state media: ivsc: csi: Swap SINK and SOURCE pads media: ipu-bridge: Serialise calls to IPU bridge init ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/ericvh/v9fsLinus Torvalds authored
Pull 9p updates from Eric Van Hensbergen: "This includes a number of patches addressing improvements in the cache portions of the 9p client. The biggest improvements have to do with fixing handling of inodes and eliminating duplicate structures and unnecessary allocation/release of inode structures and many associated unnecessary protocol traffic. This also dramatically reduced code complexity across the code and sets us up to add proper temporal cache capabilities" * tag '9p-for-6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/ericvh/v9fs: fs/9p: fix dups even in uncached mode fs/9p: simplify iget to remove unnecessary paths fs/9p: rework qid2ino logic fs/9p: Eliminate now unused v9fs_get_inode fs/9p: Eliminate redundant non-cache path in mknod fs/9p: remove walk and inode allocation from symlink fs/9p: convert mkdir to use get_new_inode fs/9p: switch vfsmount to use v9fs_get_new_inode
-
git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuseLinus Torvalds authored
Pull fuse updates from Miklos Szeredi: - Add passthrough mode for regular file I/O. This allows performing read and write (also via memory maps) on a backing file without incurring the overhead of roundtrips to userspace. For now this is only allowed to privileged servers, but this limitation will go away in the future (Amir Goldstein) - Fix interaction of direct I/O mode with memory maps (Bernd Schubert) - Export filesystem tags through sysfs for virtiofs (Stefan Hajnoczi) - Allow resending queued requests for server crash recovery (Zhao Chen) - Misc fixes and cleanups * tag 'fuse-update-6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse: (38 commits) fuse: get rid of ff->readdir.lock fuse: remove unneeded lock which protecting update of congestion_threshold fuse: Fix missing FOLL_PIN for direct-io fuse: remove an unnecessary if statement fuse: Track process write operations in both direct and writethrough modes fuse: Use the high bit of request ID for indicating resend requests fuse: Introduce a new notification type for resend pending requests fuse: add support for explicit export disabling fuse: __kuid_val/__kgid_val helpers in fuse_fill_attr_from_inode() fuse: fix typo for fuse_permission comment fuse: Convert fuse_writepage_locked to take a folio fuse: Remove fuse_writepage virtio_fs: remove duplicate check if queue is broken fuse: use FUSE_ROOT_ID in fuse_get_root_inode() fuse: don't unhash root fuse: fix root lookup with nonzero generation fuse: replace remaining make_bad_inode() with fuse_make_bad() virtiofs: drop __exit from virtio_fs_sysfs_exit() fuse: implement passthrough for mmap fuse: implement splice read/write passthrough ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4Linus Torvalds authored
Pull ext4 updates from Ted Ts'o: "Ext4 bug fixes and cleanups, plus some additional kunit tests" * tag 'ext4_for_linus-6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: (23 commits) ext4: initialize sbi->s_freeclusters_counter and sbi->s_dirtyclusters_counter before use in kunit test ext4: hold group lock in ext4 kunit test ext4: alloc test super block from sget ext4: kunit: use dynamic inode allocation ext4: enable meta_bg only when new desc blocks are needed ext4: remove unused parameter biop in ext4_issue_discard() ext4: remove SLAB_MEM_SPREAD flag usage ext4: verify s_clusters_per_group even without bigalloc ext4: fix corruption during on-line resize ext4: don't report EOPNOTSUPP errors from discard ext4: drop duplicate ea_inode handling in ext4_xattr_block_set() ext4: fold quota accounting into ext4_xattr_inode_lookup_create() ext4: correct best extent lstart adjustment logic ext4: forbid commit inconsistent quota data when errors=remount-ro ext4: add a hint for block bitmap corrupt state in mb_groups ext4: fix the comment of ext4_map_blocks()/ext4_ext_map_blocks() ext4: improve error msg for ext4_mb_seq_groups_show ext4: remove unused buddy_loaded in ext4_mb_seq_groups_show ext4: Add unit test for ext4_mb_mark_diskspace_used ext4: Add unit test for mb_free_blocks ...
-
https://evilpiepirate.org/git/bcachefsLinus Torvalds authored
Pull bcachefs updates from Kent Overstreet: - Subvolume children btree; this is needed for providing a userspace interface for walking subvolumes, which will come later - Lots of improvements to directory structure checking - Improved journal pipelining, significantly improving performance on high iodepth write workloads - Discard path improvements: the discard path is more efficient, and no longer flushes the journal unnecessarily - Buffered write path can now avoid taking the inode lock - new mm helper: memalloc_flags_{save|restore} - mempool now does kvmalloc mempools * tag 'bcachefs-2024-03-13' of https://evilpiepirate.org/git/bcachefs: (128 commits) bcachefs: time_stats: shrink time_stat_buffer for better alignment bcachefs: time_stats: split stats-with-quantiles into a separate structure bcachefs: mean_and_variance: put struct mean_and_variance_weighted on a diet bcachefs: time_stats: add larger units bcachefs: pull out time_stats.[ch] bcachefs: reconstruct_alloc cleanup bcachefs: fix bch_folio_sector padding bcachefs: Fix btree key cache coherency during replay bcachefs: Always flush write buffer in delete_dead_inodes() bcachefs: Fix order of gc_done passes bcachefs: fix deletion of indirect extents in btree_gc bcachefs: Prefer struct_size over open coded arithmetic bcachefs: Kill unused flags argument to btree_split() bcachefs: Check for writing superblocks with nonsense member seq fields bcachefs: fix bch2_journal_buf_to_text() lib/generic-radix-tree.c: Make nodes more reasonably sized bcachefs: copy_(to|from)_user_errcode() bcachefs: Split out bkey_types.h bcachefs: fix lost journal buf wakeup due to improved pipelining bcachefs: intercept mountoption value for bool type ...
-
- Mar 15, 2024
-
-
Linus Torvalds authored
Merge tag 'mm-nonmm-stable-2024-03-14-09-36' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm Pull non-MM updates from Andrew Morton: - Kuan-Wei Chiu has developed the well-named series "lib min_heap: Min heap optimizations". - Kuan-Wei Chiu has also sped up the library sorting code in the series "lib/sort: Optimize the number of swaps and comparisons". - Alexey Gladkov has added the ability for code running within an IPC namespace to alter its IPC and MQ limits. The series is "Allow to change ipc/mq sysctls inside ipc namespace". - Geert Uytterhoeven has contributed some dhrystone maintenance work in the series "lib: dhry: miscellaneous cleanups". - Ryusuke Konishi continues nilfs2 maintenance work in the series "nilfs2: eliminate kmap and kmap_atomic calls" "nilfs2: fix kernel bug at submit_bh_wbc()" - Nathan Chancellor has updated our build tools requirements in the series "Bump the minimum supported version of LLVM to 13.0.1". - Muhammad Usama Anjum continues with the selftests maintenance work in the series "selftests/mm: Improve run_vmtests.sh". - Oleg Nesterov has done some maintenance work against the signal code in the series "get_signal: minor cleanups and fix". Plus the usual shower of singleton patches in various parts of the tree. Please see the individual changelogs for details. * tag 'mm-nonmm-stable-2024-03-14-09-36' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (77 commits) nilfs2: prevent kernel bug at submit_bh_wbc() nilfs2: fix failure to detect DAT corruption in btree and direct mappings ocfs2: enable ocfs2_listxattr for special files ocfs2: remove SLAB_MEM_SPREAD flag usage assoc_array: fix the return value in assoc_array_insert_mid_shortcut() buildid: use kmap_local_page() watchdog/core: remove sysctl handlers from public header nilfs2: use div64_ul() instead of do_div() mul_u64_u64_div_u64: increase precision by conditionally swapping a and b kexec: copy only happens before uchunk goes to zero get_signal: don't initialize ksig->info if SIGNAL_GROUP_EXIT/group_exec_task get_signal: hide_si_addr_tag_bits: fix the usage of uninitialized ksig get_signal: don't abuse ksig->info.si_signo and ksig->sig const_structs.checkpatch: add device_type Normalise "name (ad@dr)" MODULE_AUTHORs to "name <ad@dr>" dyndbg: replace kstrdup() + strchr() with kstrdup_and_replace() list: leverage list_is_head() for list_entry_is_head() nilfs2: MAINTAINERS: drop unreachable project mirror site smp: make __smp_processor_id() 0-argument macro fat: fix uninitialized field in nostale filehandles ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mmLinus Torvalds authored
Pull MM updates from Andrew Morton: - Sumanth Korikkar has taught s390 to allocate hotplug-time page frames from hotplugged memory rather than only from main memory. Series "implement "memmap on memory" feature on s390". - More folio conversions from Matthew Wilcox in the series "Convert memcontrol charge moving to use folios" "mm: convert mm counter to take a folio" - Chengming Zhou has optimized zswap's rbtree locking, providing significant reductions in system time and modest but measurable reductions in overall runtimes. The series is "mm/zswap: optimize the scalability of zswap rb-tree". - Chengming Zhou has also provided the series "mm/zswap: optimize zswap lru list" which provides measurable runtime benefits in some swap-intensive situations. - And Chengming Zhou further optimizes zswap in the series "mm/zswap: optimize for dynamic zswap_pools". Measured improvements are modest. - zswap cleanups and simplifications from Yosry Ahmed in the series "mm: zswap: simplify zswap_swapoff()". - In the series "Add DAX ABI for memmap_on_memory", Vishal Verma has contributed several DAX cleanups as well as adding a sysfs tunable to control the memmap_on_memory setting when the dax device is hotplugged as system memory. - Johannes Weiner has added the large series "mm: zswap: cleanups", which does that. - More DAMON work from SeongJae Park in the series "mm/damon: make DAMON debugfs interface deprecation unignorable" "selftests/damon: add more tests for core functionalities and corner cases" "Docs/mm/damon: misc readability improvements" "mm/damon: let DAMOS feeds and tame/auto-tune itself" - In the series "mm/mempolicy: weighted interleave mempolicy and sysfs extension" Rakie Kim has developed a new mempolicy interleaving policy wherein we allocate memory across nodes in a weighted fashion rather than uniformly. This is beneficial in heterogeneous memory environments appearing with CXL. - Christophe Leroy has contributed some cleanup and consolidation work against the ARM pagetable dumping code in the series "mm: ptdump: Refactor CONFIG_DEBUG_WX and check_wx_pages debugfs attribute". - Luis Chamberlain has added some additional xarray selftesting in the series "test_xarray: advanced API multi-index tests". - Muhammad Usama Anjum has reworked the selftest code to make its human-readable output conform to the TAP ("Test Anything Protocol") format. Amongst other things, this opens up the use of third-party tools to parse and process out selftesting results. - Ryan Roberts has added fork()-time PTE batching of THP ptes in the series "mm/memory: optimize fork() with PTE-mapped THP". Mainly targeted at arm64, this significantly speeds up fork() when the process has a large number of pte-mapped folios. - David Hildenbrand also gets in on the THP pte batching game in his series "mm/memory: optimize unmap/zap with PTE-mapped THP". It implements batching during munmap() and other pte teardown situations. The microbenchmark improvements are nice. - And in the series "Transparent Contiguous PTEs for User Mappings" Ryan Roberts further utilizes arm's pte's contiguous bit ("contpte mappings"). Kernel build times on arm64 improved nicely. Ryan's series "Address some contpte nits" provides some followup work. - In the series "mm/hugetlb: Restore the reservation" Breno Leitao has fixed an obscure hugetlb race which was causing unnecessary page faults. He has also added a reproducer under the selftest code. - In the series "selftests/mm: Output cleanups for the compaction test", Mark Brown did what the title claims. - Kinsey Ho has added the series "mm/mglru: code cleanup and refactoring". - Even more zswap material from Nhat Pham. The series "fix and extend zswap kselftests" does as claimed. - In the series "Introduce cpu_dcache_is_aliasing() to fix DAX regression" Mathieu Desnoyers has cleaned up and fixed rather a mess in our handling of DAX on archiecctures which have virtually aliasing data caches. The arm architecture is the main beneficiary. - Lokesh Gidra's series "per-vma locks in userfaultfd" provides dramatic improvements in worst-case mmap_lock hold times during certain userfaultfd operations. - Some page_owner enhancements and maintenance work from Oscar Salvador in his series "page_owner: print stacks and their outstanding allocations" "page_owner: Fixup and cleanup" - Uladzislau Rezki has contributed some vmalloc scalability improvements in his series "Mitigate a vmap lock contention". It realizes a 12x improvement for a certain microbenchmark. - Some kexec/crash cleanup work from Baoquan He in the series "Split crash out from kexec and clean up related config items". - Some zsmalloc maintenance work from Chengming Zhou in the series "mm/zsmalloc: fix and optimize objects/page migration" "mm/zsmalloc: some cleanup for get/set_zspage_mapping()" - Zi Yan has taught the MM to perform compaction on folios larger than order=0. This a step along the path to implementaton of the merging of large anonymous folios. The series is named "Enable >0 order folio memory compaction". - Christoph Hellwig has done quite a lot of cleanup work in the pagecache writeback code in his series "convert write_cache_pages() to an iterator". - Some modest hugetlb cleanups and speedups in Vishal Moola's series "Handle hugetlb faults under the VMA lock". - Zi Yan has changed the page splitting code so we can split huge pages into sizes other than order-0 to better utilize large folios. The series is named "Split a folio to any lower order folios". - David Hildenbrand has contributed the series "mm: remove total_mapcount()", a cleanup. - Matthew Wilcox has sought to improve the performance of bulk memory freeing in his series "Rearrange batched folio freeing". - Gang Li's series "hugetlb: parallelize hugetlb page init on boot" provides large improvements in bootup times on large machines which are configured to use large numbers of hugetlb pages. - Matthew Wilcox's series "PageFlags cleanups" does that. - Qi Zheng's series "minor fixes and supplement for ptdesc" does that also. S390 is affected. - Cleanups to our pagemap utility functions from Peter Xu in his series "mm/treewide: Replace pXd_large() with pXd_leaf()". - Nico Pache has fixed a few things with our hugepage selftests in his series "selftests/mm: Improve Hugepage Test Handling in MM Selftests". - Also, of course, many singleton patches to many things. Please see the individual changelogs for details. * tag 'mm-stable-2024-03-13-20-04' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (435 commits) mm/zswap: remove the memcpy if acomp is not sleepable crypto: introduce: acomp_is_async to expose if comp drivers might sleep memtest: use {READ,WRITE}_ONCE in memory scanning mm: prohibit the last subpage from reusing the entire large folio mm: recover pud_leaf() definitions in nopmd case selftests/mm: skip the hugetlb-madvise tests on unmet hugepage requirements selftests/mm: skip uffd hugetlb tests with insufficient hugepages selftests/mm: dont fail testsuite due to a lack of hugepages mm/huge_memory: skip invalid debugfs new_order input for folio split mm/huge_memory: check new folio order when split a folio mm, vmscan: retry kswapd's priority loop with cache_trim_mode off on failure mm: add an explicit smp_wmb() to UFFDIO_CONTINUE mm: fix list corruption in put_pages_list mm: remove folio from deferred split list before uncharging it filemap: avoid unnecessary major faults in filemap_fault() mm,page_owner: drop unnecessary check mm,page_owner: check for null stack_record before bumping its refcount mm: swap: fix race between free_swap_and_cache() and swapoff() mm/treewide: align up pXd_leaf() retval across archs mm/treewide: drop pXd_large() ...
-
Linus Torvalds authored
Merge tag 'perf-tools-for-v6.9-2024-03-13' of git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools Pull perf tools updates from Namhyung Kim: "perf stat: - Support new 'cluster' aggregation mode for shared resources depending on the hardware configuration: $ sudo perf stat -a --per-cluster -e cycles,instructions sleep 1 Performance counter stats for 'system wide': S0-D0-CLS0 2 85,051,822 cycles S0-D0-CLS0 2 73,909,908 instructions # 0.87 insn per cycle S0-D0-CLS2 2 93,365,918 cycles S0-D0-CLS2 2 83,006,158 instructions # 0.89 insn per cycle S0-D0-CLS4 2 104,157,523 cycles S0-D0-CLS4 2 53,234,396 instructions # 0.51 insn per cycle S0-D0-CLS6 2 65,891,079 cycles S0-D0-CLS6 2 41,478,273 instructions # 0.63 insn per cycle 1.002407989 seconds time elapsed - Various fixes and cleanups for event metrics including NaN handling perf script: - Use libcapstone if available to disassemble the instructions. This enables 'perf script -F disasm' and 'perf script --insn-trace=disasm' (for Intel-PT): $ perf script -F event,ip,disasm cycles:P: ffffffffa988d428 wrmsr cycles:P: ffffffffa9839d25 movq %rax, %r14 cycles:P: ffffffffa9cdcaf0 endbr64 cycles:P: ffffffffa988d428 wrmsr cycles:P: ffffffffa988d428 wrmsr cycles:P: ffffffffaa401f86 iretq cycles:P: ffffffffa99c4de5 movq 0x30(%rcx), %r8 cycles:P: ffffffffa988d428 wrmsr cycles:P: ffffffffaa401f86 iretq cycles:P: ffffffffa9907983 movl 0x68(%rbx), %eax cycles:P: ffffffffa988d428 wrmsr - Expose sample ID / stream ID to python scripts perf test: - Add more perf test cases from Redhat internal test suites. This time it adds the base infra and a few perf probe tests. More to come. :) - Add 'perf test -p' for parallel execution and fix some issues found by the parallel test - Support symbol test to print symbols in given (active) module: $ perf test -F -v Symbols --dso /lib/modules/$(uname -r)/kernel/fs/ext4/ext4.ko --- start --- Testing /lib/modules/6.5.13-1rodete2-amd64/kernel/fs/ext4/ext4.ko Overlapping symbols: 7a990-7a9a0 l __pfx_ext4_exit_fs 7a990-7a9a0 g __pfx_cleanup_module Overlapping symbols: 7a9a0-7aa1c l ext4_exit_fs 7a9a0-7aa1c g cleanup_module ... JSON metric updates: - A new round of Intel metric updates - Support Power11 PVR (compatible to Power10) - Fix cache latency events on Zen 4 to set SliceId properly Internal: - Fix reference counting for 'map' data structure, tireless work from Ian! - More memory optimization for struct thread and annotate histogram. Now, 'perf report' (TUI) and 'perf annotate' should be much lighter-weight in terms of memory footprint - Support cross-arch perf register access. Clean up the build configuration so that it can detect arch-register support at runtime. This can allow to parse register data in sample which was recorded in a different arch Others: - Sync task state in 'perf sched' to kernel using trace event fields. The task states have been changed so tools cannot assume a fixed encoding - Clean up 'perf mem' to generalize the arch-specific events - Add support for local and global variables to data type profiling. This would increase the success rate of type resolution with DWARF - Add short option -H for --hierarchy in 'perf report' and 'perf top'" * tag 'perf-tools-for-v6.9-2024-03-13' of git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools: (154 commits) perf annotate: Add comments in the data structures perf annotate: Remove sym_hist.addr[] array perf annotate: Calculate instruction overhead using hashmap perf annotate: Add a hashmap for symbol histogram perf threads: Reduce table size from 256 to 8 perf threads: Switch from rbtree to hashmap perf threads: Move threads to its own files perf machine: Move machine's threads into its own abstraction perf machine: Move fprintf to for_each loop and a callback perf trace: Ignore thread hashing in summary perf report: Sort child tasks by tid perf vendor events amd: Fix Zen 4 cache latency events perf version: Display availability of OpenCSD support perf vendor events intel: Add umasks/occ_sel to PCU events. perf map: Fix map reference count issues libperf evlist: Avoid out-of-bounds access perf lock contention: Account contending locks too perf metrics: Fix segv for metrics with no events perf metrics: Fix metric matching perf pmu: Fix a potential memory leak in perf_pmu__lookup() ...
-
Linus Torvalds authored
Merge tag 'trace-ring-buffer-v6.8-rc7-2' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace Pull tracing updates from Steven Rostedt: - Do not update shortest_full in rb_watermark_hit() if the watermark is hit. The shortest_full field was being updated regardless if the task was going to wait or not. If the watermark is hit, then the task is not going to wait, so do not update the shortest_full field (used by the waker). - Update shortest_full field before setting the full_waiters_pending flag In the poll logic, the full_waiters_pending flag was being set before the shortest_full field was set. If the full_waiters_pending flag is set, writers will check the shortest_full field which has the least percentage of data that the ring buffer needs to be filled before waking up. The writer will check shortest_full if full_waiters_pending is set, and if the ring buffer percentage filled is greater than shortest full, then it will call the irq_work to wake up the waiters. The problem was that the poll logic set the full_waiters_pending flag before updating shortest_full, which when zero will always trigger the writer to call the irq_work to wake up the waiters. The irq_work will reset the shortest_full field back to zero as the woken waiters is suppose to reset it. - There's some optimized logic in the rb_watermark_hit() that is used in ring_buffer_wait(). Use that helper function in the poll logic as well. - Restructure ring_buffer_wait() to use wait_event_interruptible() The logic to wake up pending readers when the file descriptor is closed is racy. Restructure ring_buffer_wait() to allow callers to pass in conditions besides the ring buffer having enough data in it by using wait_event_interruptible(). - Update the tracing_wait_on_pipe() to call ring_buffer_wait() with its own conditions to exit the wait loop. * tag 'trace-ring-buffer-v6.8-rc7-2' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace: tracing/ring-buffer: Fix wait_on_pipe() race ring-buffer: Use wait_event_interruptible() in ring_buffer_wait() ring-buffer: Reuse rb_watermark_hit() for the poll logic ring-buffer: Fix full_waiters_pending in poll ring-buffer: Do not set shortest_full when full target is hit
-
git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-traceLinus Torvalds authored
Pull probes updates from Masami Hiramatsu: "x86 kprobes: - Use boolean for some function return instead of 0 and 1 - Prohibit probing on INT/UD. This prevents user to put kprobe on INTn/INT1/INT3/INTO and UD0/UD1/UD2 because these are used for a special purpose in the kernel - Boost Grp instructions. Because a few percent of kernel instructions are Grp 2/3/4/5 and those are safe to be executed without ip register fixup, allow those to be boosted (direct execution on the trampoline buffer with a JMP) tracing: - Add function argument access from return events (kretprobe and fprobe). This allows user to compare how a data structure field is changed after executing a function. With BTF, return event also accepts function argument access by name. - Fix a wrong comment (using "Kretprobe" in fprobe) - Cleanup a big probe argument parser function into three parts, type parser, post-processing function, and main parser - Cleanup to set nr_args field when initializing trace_probe instead of counting up it while parsing - Cleanup a redundant #else block from tracefs/README source code - Update selftests to check entry argument access from return probes - Documentation update about entry argument access from return probes" * tag 'probes-v6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace: Documentation: tracing: Add entry argument access at function exit selftests/ftrace: Add test cases for entry args at function exit tracing/probes: Support $argN in return probe (kprobe and fprobe) tracing: Remove redundant #else block for BTF args from README tracing/probes: cleanup: Set trace_probe::nr_args at trace_probe_init tracing/probes: Cleanup probe argument parser tracing/fprobe-event: cleanup: Fix a wrong comment in fprobe event x86/kprobes: Boost more instructions from grp2/3/4/5 x86/kprobes: Prohibit kprobing on INT and UD x86/kprobes: Refactor can_{probe,boost} return type to bool
-
git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/lsmLinus Torvalds authored
Pull lsm fixes from Paul Moore: "Two fixes to address issues with the LSM syscalls that we shipped in Linux v6.8. The first patch might be a bit controversial, but the second is a rather straightforward fix; more on both below. The first fix from Casey addresses a problem that should have been caught during the ~16 month (?) review cycle, but sadly was not. The good news is that Dmitry caught it very quickly once Linux v6.8 was released. The core issue is the use of size_t parameters to pass buffer sizes back and forth in the syscall; while we could have solved this with a compat syscall definition, given the newness of the syscalls I wanted to attempt to just redefine the size_t parameters as u32 types and avoid the work associated with a set of compat syscalls. However, this is technically a change in the syscall's signature/API so I can understand if you're opposed to this, even if the syscalls are less than a week old. [ Fingers crossed nobody even notices - Linus ] The second fix is a rather trivial fix to allow userspace to call into the lsm_get_self_attr() syscall with a NULL buffer to quickly determine a minimum required size for the buffer. We do have kselftests for this very case, I'm not sure why I didn't notice the failure; I'm going to guess stupidity, tired eyes, I dunno. My apologies we didn't catch this earlier" * tag 'lsm-pr-20240314' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/lsm: lsm: handle the NULL buffer case in lsm_fill_user_ctx() lsm: use 32-bit compatible data types in LSM syscalls
-
git://git.kernel.org/pub/scm/linux/kernel/git/mic/linuxLinus Torvalds authored
Pull landlock updates from Mickaël Salaün: "Some miscellaneous improvements, including new KUnit tests, extended documentation and boot help, and some cosmetic cleanups. Additional test changes already went through the net tree" * tag 'landlock-6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/mic/linux: samples/landlock: Don't error out if a file path cannot be opened landlock: Use f_cred in security_file_open() hook landlock: Rename "ptrace" files to "task" landlock: Simplify current_check_access_socket() landlock: Warn once if a Landlock action is requested while disabled landlock: Extend documentation for kernel support landlock: Add support for KUnit tests selftests/landlock: Clean up error logs related to capabilities
-
https://github.com/openrisc/linuxLinus Torvalds authored
Pull OpenRISC updates from Stafford Horne: "Just a few cleanups and updates that were sent in: - Replace asm/fixmap.h with asm-generic version - Fix to move memblock setup up before it's used during init" * tag 'for-linus' of https://github.com/openrisc/linux: openrisc: Use asm-generic's version of fix_to_virt() & virt_to_fix() openrisc: Call setup_memory() earlier in the init sequence
-
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linuxLinus Torvalds authored
Pull arm64 updates from Catalin Marinas: "The major features are support for LPA2 (52-bit VA/PA with 4K and 16K pages), the dpISA extension and Rust enabled on arm64. The changes are mostly contained within the usual arch/arm64/, drivers/perf, the arm64 Documentation and kselftests. The exception is the Rust support which touches some generic build files. Summary: - Reorganise the arm64 kernel VA space and add support for LPA2 (at stage 1, KVM stage 2 was merged earlier) - 52-bit VA/PA address range with 4KB and 16KB pages - Enable Rust on arm64 - Support for the 2023 dpISA extensions (data processing ISA), host only - arm64 perf updates: - StarFive's StarLink (integrates one or more CPU cores with a shared L3 memory system) PMU support - Enable HiSilicon Erratum 162700402 quirk for HIP09 - Several updates for the HiSilicon PCIe PMU driver - Arm CoreSight PMU support - Convert all drivers under drivers/perf/ to use .remove_new() - Miscellaneous: - Don't enable workarounds for "rare" errata by default - Clean up the DAIF flags handling for EL0 returns (in preparation for NMI support) - Kselftest update for ptrace() - Update some of the sysreg field definitions - Slight improvement in the code generation for inline asm I/O accessors to permit offset addressing - kretprobes: acquire regs via a BRK exception (previously done via a trampoline handler) - SVE/SME cleanups, comment updates - Allow CALL_OPS+CC_OPTIMIZE_FOR_SIZE with clang (previously disabled due to gcc silently ignoring -falign-functions=N)" * tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (134 commits) Revert "mm: add arch hook to validate mmap() prot flags" Revert "arm64: mm: add support for WXN memory translation attribute" Revert "ARM64: Dynamically allocate cpumasks and increase supported CPUs to 512" ARM64: Dynamically allocate cpumasks and increase supported CPUs to 512 kselftest/arm64: Add 2023 DPISA hwcap test coverage kselftest/arm64: Add basic FPMR test kselftest/arm64: Handle FPMR context in generic signal frame parser arm64/hwcap: Define hwcaps for 2023 DPISA features arm64/ptrace: Expose FPMR via ptrace arm64/signal: Add FPMR signal handling arm64/fpsimd: Support FEAT_FPMR arm64/fpsimd: Enable host kernel access to FPMR arm64/cpufeature: Hook new identification registers up to cpufeature docs: perf: Fix build warning of hisi-pcie-pmu.rst perf: starfive: Only allow COMPILE_TEST for 64-bit architectures MAINTAINERS: Add entry for StarFive StarLink PMU docs: perf: Add description for StarFive's StarLink PMU dt-bindings: perf: starfive: Add JH8100 StarLink PMU perf: starfive: Add StarLink PMU support docs: perf: Update usage for target filter of hisi-pcie-pmu ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/soundLinus Torvalds authored
Pull sound updates from Takashi Iwai: "This was a relatively calm development cycle. Most of changes are rather small device-specific fixes and enhancements. The only significant changes in ALSA core are code refactoring with the recent cleanup infrastructure, which should bring no functionality changes. Some highlights below: Core: - Lots of cleanups in ALSA core code with automatic kfree cleanup and locking guard macros - New ALSA core kunit test ASoC: - SoundWire support for AMD ACP 6.3 systems - Support for reporting version information for AVS firmware - Support DSPless mode for Intel Soundwire systems - Support for configuring CS35L56 amplifiers using EFI calibration data - Log which component is being operated on as part of power management trace events. - Support for Microchip SAM9x7, NXP i.MX95 and Qualcomm WCD939x HD- and USB-audio: - More Cirrus HD-audio codec support - TAS2781 HD-audio codec fixes - Scarlett2 mixer fixes Others: - Enhancement of virtio driver for audio control supports - Cleanups of legacy PM code with new macros - Firewire sound updates" * tag 'sound-6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (307 commits) ALSA: usb-audio: Stop parsing channels bits when all channels are found. ALSA: hda/tas2781: remove unnecessary runtime_pm calls ALSA: hda/realtek - ALC236 fix volume mute & mic mute LED on some HP models ALSA: aaci: Delete unused variable in aaci_do_suspend ALSA: scarlett2: Fix Scarlett 4th Gen input gain range again ALSA: scarlett2: Fix Scarlett 4th Gen input gain range ALSA: scarlett2: Fix Scarlett 4th Gen autogain status values ALSA: scarlett2: Fix Scarlett 4th Gen 4i4 low-voltage detection ALSA: hda/tas2781: restore power state after system_resume ALSA: hda/tas2781: do not call pm_runtime_force_* in system_resume/suspend ALSA: hda/tas2781: do not reset cur_* values in runtime_suspend ALSA: hda/tas2781: add lock to system_suspend ALSA: hda/tas2781: use dev_dbg in system_resume ALSA: hda/realtek: fix ALC285 issues on HP Envy x360 laptops platform/x86: serial-multi-instantiate: Add support for CS35L54 and CS35L57 ALSA: hda: cs35l56: Add support for CS35L54 and CS35L57 ASoC: cs35l56: Add support for CS35L54 and CS35L57 ASoC: Intel: catpt: Carefully use PCI bitwise constants ALSA: hda: hda_component: Include sound/hda_codec.h ALSA: hda: hda_component: Add missing #include guards ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/pci/pciLinus Torvalds authored
Pull PCI updates from Bjorn Helgaas: "Enumeration: - Consolidate interrupt related code in irq.c (Ilpo Järvinen) - Reduce kernel size by replacing sysfs resource macros with functions (Ilpo Järvinen) - Reduce kernel size by compiling sysfs support only when CONFIG_SYSFS=y (Lukas Wunner) - Avoid using Extended Tags on 3ware-9650SE Root Port to work around an apparent hardware defect (Jörg Wedekind) Resource management: - Fix an MMIO mapping leak in pci_iounmap() (Philipp Stanner) - Move pci_iomap.c and other PCI-specific devres code to drivers/pci (Philipp Stanner) - Consolidate PCI devres code in devres.c (Philipp Stanner) Power management: - Avoid D3cold on Asus B1400 PCI-NVMe bridge, where firmware doesn't know how to return correctly to D0, and remove previous quirk that wasn't as specific (Daniel Drake) - Allow runtime PM when the driver enables it but doesn't need any runtime PM callbacks (Raag Jadav) - Drain runtime-idle callbacks before driver removal to avoid races between .remove() and .runtime_idle(), which caused intermittent page faults when the rtsx .runtime_idle() accessed registers that its .remove() had already unmapped (Rafael J. Wysocki) Virtualization: - Avoid Secondary Bus Reset on LSI FW643 so it can be assigned to VMs with VFIO, e.g., for professional audio software on many Apple machines, at the cost of leaking state between VMs (Edmund Raile) Error handling: - Print all logged TLP Prefixes, not just the first, after AER or DPC errors (Ilpo Järvinen) - Quirk the DPC PIO log size for Intel Raptor Lake Root Ports, which still don't advertise a legal size (Paul Menzel) - Ignore expected DPC Surprise Down errors on hot removal (Smita Koralahalli) - Block runtime suspend while handling AER errors to avoid races that prevent the device form being resumed from D3hot (Stanislaw Gruszka) Peer-to-peer DMA: - Use atomic XA allocation in RCU read section (Christophe JAILLET) ASPM: - Collect bits of ASPM-related code that we need even without CONFIG_PCIEASPM into aspm.c (David E. Box) - Save/restore L1 PM Substates config for suspend/resume (David E. Box) - Update save_save when ASPM config is changed, so a .slot_reset() during error recovery restores the changed config, not the .probe()-time config (Vidya Sagar) Endpoint framework: - Refactor and improve pci_epf_alloc_space() API (Niklas Cassel) - Clean up endpoint BAR descriptions (Niklas Cassel) - Fix ntb_register_device() name leak in error path (Yang Yingliang) - Return actual error code for pci_vntb_probe() failure (Yang Yingliang) Broadcom STB PCIe controller driver: - Fix MDIO write polling, which previously never waited for completion (Jonathan Bell) Cadence PCIe endpoint driver: - Clear the ARI "Next Function Number" of last function (Jasko-EXT Wojciech) Freescale i.MX6 PCIe controller driver: - Simplify by replacing switch statements with function pointers for different hardware variants (Frank Li) - Simplify by using clk_bulk*() API (Frank Li) - Remove redundant DT clock and reg/reg-name details (Frank Li) - Add i.MX95 DT and driver support for both Root Complex and Endpoint mode (Frank Li) Microsoft Hyper-V host bridge driver: - Reduce memory usage by limiting ring buffer size to 16KB instead of 4 pages (Michael Kelley) Qualcomm PCIe controller driver: - Add X1E80100 DT and driver support (Abel Vesa) - Add DT 'required-opps' for SoCs that require a minimum performance level (Johan Hovold) - Make DT 'msi-map-mask' optional, depending on how MSI interrupts are mapped (Johan Hovold) - Disable ASPM L0s for sc8280xp, sa8540p and sa8295p because the PHY configuration isn't tuned correctly for L0s (Johan Hovold) - Split dt-binding qcom,pcie.yaml into qcom,pcie-common.yaml and separate files for SA8775p, SC7280, SC8180X, SC8280XP, SM8150, SM8250, SM8350, SM8450, SM8550 for easier reviewing (Krzysztof Kozlowski) - Enable BDF to SID translation by disabling bypass mode (Manivannan Sadhasivam) - Add endpoint MHI support for Snapdragon SA8775P SoC (Mrinmay Sarkar) Synopsys DesignWare PCIe controller driver: - Allocate 64-bit MSI address if no 32-bit address is available (Ajay Agarwal) - Fix endpoint Resizable BAR to actually advertise the required 1MB size (Niklas Cassel) MicroSemi Switchtec management driver: - Release resources if the .probe() fails (Christophe JAILLET) Miscellaneous: - Make pcie_port_bus_type const (Ricardo B. Marliere)" * tag 'pci-v6.9-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci: (77 commits) PCI/ASPM: Update save_state when configuration changes PCI/ASPM: Disable L1 before configuring L1 Substates PCI/ASPM: Call pci_save_ltr_state() from pci_save_pcie_state() PCI/ASPM: Save L1 PM Substates Capability for suspend/resume PCI: hv: Fix ring buffer size calculation PCI: dwc: endpoint: Fix advertised resizable BAR size PCI: cadence: Clear the ARI Capability Next Function Number of the last function PCI: dwc: Strengthen the MSI address allocation logic PCI: brcmstb: Fix broken brcm_pcie_mdio_write() polling PCI: qcom: Add X1E80100 PCIe support dt-bindings: PCI: qcom: Document the X1E80100 PCIe Controller PCI: qcom: Enable BDF to SID translation properly PCI/AER: Generalize TLP Header Log reading PCI/AER: Use explicit register size for PCI_ERR_CAP PCI: qcom: Disable ASPM L0s for sc8280xp, sa8540p and sa8295p dt-bindings: PCI: qcom: Do not require 'msi-map-mask' dt-bindings: PCI: qcom: Allow 'required-opps' PCI/AER: Block runtime suspend when handling errors PCI/ASPM: Move pci_save_ltr_state() to aspm.c PCI/ASPM: Always build aspm.c ...
-
Linus Torvalds authored
Merge tag 'platform-drivers-x86-v6.9-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86 Pull x86 platform driver updates from Ilpo Järvinen: - New acer-wmi HW support - Support for new revision of amd/pmf heartbeat notify - Correctly handle asus-wmi HW without LEDs - fujitsu-laptop battery charge control support - Support for new hp-wmi thermal profiles - Support ideapad-laptop refresh rate key - Put intel/pmc AI accelerator (GNA) into D3 if it has no driver to allow entry into low-power modes, and temporarily removed Lunar Lake SSRAM support due to breaking FW changes causing probe fail (further breaking FW changes are still pending) - Report pmc/punit_atom devices that prevent reacing low power levels - Surface Fan speed function support - Support for more sperial keys and complete the list of models with non-standard fan registers in thinkpad_acpi - New DMI touchscreen HW support - Continued modernization efforts of wmi - Removal of obsoleted ledtrig-audio call and the related dependency - Debug & metrics interface improvements - Miscellaneous cleanups / fixes / improvements * tag 'platform-drivers-x86-v6.9-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86: (87 commits) platform/x86/intel/pmc: Improve PKGC residency counters debug platform/x86: asus-wmi: Consider device is absent when the read is ~0 Documentation/x86/amd/hsmp: Updating urls platform/mellanox: mlxreg-hotplug: Remove redundant NULL-check platform/x86/amd/pmf: Update sps power thermals according to the platform-profiles platform/x86/amd/pmf: Add support to get sps default APTS index values platform/x86/amd/pmf: Add support to get APTS index numbers for static slider platform/x86/amd/pmf: Add support to notify sbios heart beat event platform/x86/amd/pmf: Add support to get sbios requests in PMF driver platform/x86/amd/pmf: Disable debugfs support for querying power thermals platform/x86/amd/pmf: Differentiate PMF ACPI versions x86/platform/atom: Check state of Punit managed devices on s2idle platform/x86: pmc_atom: Check state of PMC clocks on s2idle platform/x86: pmc_atom: Check state of PMC managed devices on s2idle platform/x86: pmc_atom: Annotate d3_sts register bit defines clk: x86: Move clk-pmc-atom register defines to include/linux/platform_data/x86/pmc_atom.h platform/x86: make fw_attr_class constant platform/x86/intel/tpmi: Change vsec offset to u64 platform/x86: intel_scu_pcidrv: Remove unused intel-mid.h platform/x86: intel_scu_wdt: Remove unused intel-mid.h ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/lee/ledsLinus Torvalds authored
Pull LED updates from Lee Jones: "Core Framework: - Introduce ExpressWire library New Drivers: - Add support for ON Semiconductor NCP5623 RGB LED Driver New Device Support: - Add support for PM660L to Qualcomm's LPG driver New Functionality: - Dynamically load modules required for the default-trigger - Add some support for suspend and resume - Allow LEDs to remain lit during suspend Fix-ups: - Device Tree binding adaptions/conversions/creation - Fix include lists; alphabetise, remove unused, explicitly add used - Add new led_match_default_trigger to avoid duplication - Add module alias' to aid auto-loading - Default to hw_control if no others are specified - De-bloat the supported link speed attribute lists - Remove superfluous code and simplify overall - Constify some variables Bug Fixes: - Prevent kernel panic when renaming the net interface - Fix Kconfig related build errors - Ensure mutexes are unlocked prior to destroying them - Provide clean-up between state changes to avoid invalid state - Fix some broken kernel-doc headers" * tag 'leds-next-6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/leds: (41 commits) leds: ncp5623: Add MS suffix to time defines leds: Add NCP5623 multi-led driver dt-bindings: leds: Add NCP5623 multi-LED Controller leds: mlxreg: Drop an excess struct mlxreg_led_data member leds: leds-mlxcpld: Fix struct mlxcpld_led_priv member name leds: lm3601x: Fix struct lm3601_led kernel-doc warnings leds: Fix ifdef check for gpio_led_register_device() dt-bindings: leds: qcom-lpg: Narrow nvmem for other variants dt-bindings: leds: qcom-lpg: Drop redundant qcom,pm8550-pwm in if:then: dt-bindings: leds: Add LED_FUNCTION_WAN_ONLINE for Internet access leds: sgm3140: Add missing timer cleanup and flash gpio control leds: expresswire: Don't depend on NEW_LEDS Revert "leds: Only descend into leds directory when CONFIG_NEW_LEDS is set" leds: aw2013: Unlock mutex before destroying it leds: qcom-lpg: Add QCOM_PBS dependency leds: rgb: leds-group-multicolor: Allow LEDs to stay on in suspend leds: trigger: netdev: Fix kernel panic on interface rename trig notify leds: qcom-lpg: Add PM660L configuration and compatible leds: spi-byte: Use devm_led_classdev_register_ext() leds: pca963x: Add support for suspend and resume ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/lee/backlightLinus Torvalds authored
Pull backlight updates from Lee Jones: "New Drivers: - Add support for Kinetic KTD2801 Backlight Fix-ups: - Fix include lists; alphabetise, remove unused, explicitly add used - Device Tree binding adaptions/conversions/creation - Use dev_err_probe() to clean-up error paths - Use/convert to new/better APIs/helpers/MACROs instead of hand-rolling implementations Bug Fixes: - Fix changes of NULL pointer dereference - Remedy a bunch of logic errors - Initialise (zero) Backlight properties data structures" * tag 'backlight-next-6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/backlight: (32 commits) backlight: pandora_bl: Drop unneeded ENOMEM error message backlight: lm3630a_bl: Simplify probe return on gpio request error backlight: lm3630a_bl: Handle deferred probe backlight: as3711_bl: Handle deferred probe backlight: bd6107: Handle deferred probe backlight: l4f00242t03: Simplify with dev_err_probe() backlight: gpio: Simplify with dev_err_probe() backlight: lp8788: Fully initialize backlight_properties during probe backlight: lm3639: Fully initialize backlight_properties during probe backlight: da9052: Fully initialize backlight_properties during probe backlight: lm3630a: Use backlight_get_brightness helper in update_status backlight: lm3630a: Don't set bl->props.brightness in get_brightness backlight: lm3630a: Initialize backlight_properties on init backlight: mp3309c: Fully initialize backlight_properties during probe backlight: mp3309c: Utilise temporary variable for struct device backlight: mp3309c: Use dev_err_probe() instead of dev_err() backlight: mp3309c: Make use of device properties dt-bindings: backlight: qcom-wled: Fix bouncing email addresses backlight: hx8357: Utilise temporary variable for struct device backlight: hx8357: Make use of dev_err_probe() ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfdLinus Torvalds authored
Pull MFD updates from Lee Jones: "New Device Support: - Add support for Watchdog to ChromeOS Embedded Controller - Add support for GPIOs to ChromeOS Embedded Controller - Add supprt for Sound to MediaTek MT6357 CODEC New Functionality: - Add power-off functionality to Texas Instruments TWL series CODECs Fix-ups: - Device Tree binding adaptions/conversions/creation - Use/convert to new/better APIs/helpers/MACROs instead of hand-rolling implementations - Trivial; spelling, whitespace, clean-ups, etc - Remove superfluous code and simplify overall - Fix include lists; alphabetise, remove unused, explicitly add used - Use dev_err_probe() to clean-up error paths - Convert used cache type over to the Maple Tree in many instances - Constify a bunch of static structs - Refrain from over-riding resources provided via the firmware Bug Fixes: - Fix a clock related firmware bug on Dell XPS 9530 et al. - Repair incorrect IRQ designations - Increase buffer sizes to omit various snprintf compiler errors - Ensure errors are handled properly - Balance references and prevent resource leaks - Rectify Power Key interrupt processing - Fix Kconfig related build errors - Correct a bunch of register start-up default values" * tag 'mfd-next-6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (65 commits) mfd: cs42l43: Fix wrong GPIO_FN_SEL and SPI_CLK_CONFIG1 defaults mfd: cs42l43: Fix wrong register defaults mfd: mt6397-core: Register mt6357 sound codec dt-bindings: mfd: syscon: Add ti,am62-usb-phy-ctrl compatible dt-bindings: mfd: dlg,da9063: Make #interrupt-cells required dt-bindings: mfd: Convert atmel-flexcom to json-schema mfd: kempld-core: Don't replace resources provided by ACPI mfd: cros_ec_dev: Add GPIO device if feature present on EC dt-bindings: mfd: cros-ec: Add properties for GPIO controller mfd: twl: Select MFD_CORE mfd: core: Constify the struct device_type usage mfd: rk8xx-core: Fix interrupt processing order for power key button mfd: twl4030-power: Accept standard property for power controller mfd: twl-core: Add power off implementation for twl603x dt-bindings: mfd: ti,twl: Document system-power-controller mfd: altera-sysmgr: Call of_node_put() only when of_parse_phandle() takes a ref mfd: syscon: Remove extern from function prototypes mfd: syscon: Call of_node_put() only when of_parse_phandle() takes a ref mfd: mc13xxx: Use bitfield helpers mfd: rc5t583: Convert to use maple tree register cache ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrlLinus Torvalds authored
Pull pin control updates from Linus Walleij: "No core changes this time around. New drivers: - New driver for Renesas R8A779H0 also known as R-Car V4M. - New driver for the Awinic AW9523/B I2C GPIO expander. I found this living out-of-tree in OpenWrt as an upstream attempt had stalled on the finishing line, so I picked it up and finished the job. Improvements: - The Nomadik pin control driver was for years re-used out of tree for the ST STA chips, and now the IP was re-used in a MIPS automotive SoC called MobilEyeq5, so it has been split in pin control and GPIO drivers so the latter can be reused by MobilEyeq5. (Along with a long list of cleanups) - A lot of overall cleanup and tidying up" * tag 'pinctrl-v6.9-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (87 commits) drivers/gpio/nomadik: move dummy nmk_gpio_dbg_show_one() to header gpio: nomadik: remove BUG_ON() in nmk_gpio_populate_chip() dt-bindings: pinctrl: qcom: update compatible name for match with driver pinctrl: aw9523: Make the driver tristate pinctrl: nomadik: fix dereference of error pointer gpio: nomadik: Back out some managed resources pinctrl: aw9523: Add proper terminator pinctrl: core: comment that pinctrl_add_gpio_range() is deprecated pinctrl: pinmux: Suppress error message for -EPROBE_DEFER pinctrl: Add driver for Awinic AW9523/B I2C GPIO Expander dt-bindings: pinctrl: Add bindings for Awinic AW9523/AW9523B gpio: nomadik: Finish conversion to use firmware node APIs gpio: nomadik: fix Kconfig dependencies inbetween pinctrl & GPIO pinctrl: da9062: Add OF table dt-bindings: pinctrl: at91: add sam9x7 pinctrl: ocelot: remove redundant assignment to variable ret gpio: nomadik: grab optional reset control and deassert it at probe gpio: nomadik: support mobileye,eyeq5-gpio gpio: nomadik: handle variadic GPIO count gpio: nomadik: support shared GPIO IRQs ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supplyLinus Torvalds authored
Pull power supply and reset updates from Sebastian Reichel: "New features: - axp20x_usb_power: report USB type Cleanups: - convert lots of drivers to use devm_power_supply_register() - convert lots of reset drivers to use devm_register_sys_off_handler() - constify device_type and power_supply_class - axp20x_usb_power: use correct property to report input current limit - mm8013: correct handling of "not charging" status register - core: fix charge_behaviour formatting - minor fixes cleanups" * tag 'for-v6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply: (66 commits) power: supply: core: fix charge_behaviour formatting power: supply: core: ease special formatting implementations power: supply: mm8013: fix "not charging" detection power: supply: move power_supply_attr_groups definition back to sysfs power: supply: core: simplify power_supply_class_init power: supply: core: add power_supply_for_each_device() power: supply: core: make power_supply_class constant power: supply: bq2415x_charger: report online status power: supply: core: move power_supply_attr_group into #ifdef block power: supply: core: Fix power_supply_init_attrs() stub power: supply: bq27xxx: Report charge full state correctly power: reset: rmobile-reset: Make sysc_base2 local power: supply: core: constify the struct device_type usage power: supply: axp288_fuel_gauge: Deny ROCK Pi X power: reset: rmobile-reset: Map correct MMIO resource power: reset: xgene-reboot: Fix a NULL vs IS_ERR() test power: supply: axp288_fuel_gauge: Add STCK1A* Intel Compute Sticks to the deny-list power: reset: syscon-poweroff: Use devm_register_sys_off_handler(POWER_OFF) power: reset: syscon-poweroff: Move device data into a struct power: reset: restart-poweroff: Use devm_register_sys_off_handler(POWER_OFF) ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-hsiLinus Torvalds authored
Pull HSI updates from Sebastian Reichel: - fix kernel-doc warning - make hsi_bus_type const [ And as always I had to remind myself about the acronyn, so to avoid that for others: "HSI" is High Speed Synchronous Serial Interface, because of course it is. - Linus ] * tag 'hsi-for-6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-hsi: HSI: ssi_protocol: fix struct members kernel-doc warnings hsi: hsi_core: make hsi_bus_type const
-
git://git.kernel.org/pub/scm/linux/kernel/git/hid/hidLinus Torvalds authored
Pull HID updates from Jiri Kosina: - support for the following Bluetooth devices from Samsung: Samsung wireless {Keyboard, GamePad, Action Mouse, Book Cover, Universal Keyboard, HOGP Keyboard} (Sandeep C S) - second version of code for applying proper quirk depending on firmware version for lenovo/cptkbd (Mikhail Khvainitski) - lenovo/cptkbd firmware-dependent quirk (Mikhail Khvainitski) - assorted fixes and optimizations for amd-sfh (Basavaraj Natikar) - dead code and dead data structures removal (Jiri Slaby, Jiapeng Chong) * tag 'hid-for-linus-2024031301' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid: (25 commits) HID: amd_sfh: Set the AMD SFH driver to depend on x86 HID: input: avoid polling stylus battery on Chromebook Pompom HID: amd_sfh: Extend MP2 register access to SFH HID: amd_sfh: Improve boot time when SFH is available HID: amd_sfh: Avoid disabling the interrupt HID: amd_sfh: Update HPD sensor structure elements HID: amd_sfh: Increase sensor command timeout HID: intel-ish-hid: ipc: Add Arrow Lake PCI device ID HID: nintendo: Remove some unused functions HID: hid-prodikeys: remove struct pk_device HID: hid-prodikeys: remove unused struct pcmidi_snd members HID: hid-multitouch: remove unused mt_application::dev_time HID: hid-lg3ff: remove unused struct lg3ff_device HID: protect hid_device::bpf by CONFIG_HID_BPF HID: wacom: remove unused hid_data::pressure HID: apple: remove unused members from struct apple_sc_backlight HID: wacom: Clean up use of struct->wacom_wac HID: samsung: Add Samsung wireless bookcover and universal keyboard support HID: samsung: Add Samsung wireless action mouse support HID: samsung: Add Samsung wireless gamepad support ...
-
Linus Torvalds authored
Merge tag 'auxdisplay-v6.9-1' of git://git.kernel.org/pub/scm/linux/kernel/git/andy/linux-auxdisplay Pull auxdisplay updates from Andy Shevchenko: - New driver for GPIO based 7-segment LED display (Chris Packham) - New driver for Maxim MAX6958/6959 I²C 7-segment LED display controller - Refactor linedisp library to make the above happen - Update Holtek HT16k33 driver to follow the linedisp refactoring - Convert .remove to return void in platform drivers (Uwe Kleine-König) - Fix DT schemas (Krzysztof Kozlowski) - Refresh MAINTAINERS database * tag 'auxdisplay-v6.9-1' of git://git.kernel.org/pub/scm/linux/kernel/git/andy/linux-auxdisplay: (27 commits) auxdisplay: img-ascii-lcd: Convert to platform remove callback returning void auxdisplay: hd44780: Convert to platform remove callback returning void auxdisplay: cfag12864bfb: Convert to platform remove callback returning void auxdisplay: seg-led-gpio: Import linedisp namespace dt-bindings: auxdisplay: Add bindings for generic 7-segment LED auxdisplay: Add 7-segment LED display driver auxdisplay: Add driver for MAX695x 7-segment LED controllers dt-bindings: auxdisplay: Add Maxim MAX6958/6959 auxdisplay: ht16k33: Drop struct ht16k33_seg auxdisplay: ht16k33: Switch to use line display character mapping auxdisplay: ht16k33: Define a few helper macros auxdisplay: ht16k33: Move ht16k33_linedisp_ops down auxdisplay: ht16k33: Add default to switch-cases auxdisplay: linedisp: Allocate buffer for the string auxdisplay: linedisp: Add support for overriding character mapping auxdisplay: linedisp: Provide struct linedisp_ops for future extension auxdisplay: linedisp: Move exported symbols to a namespace auxdisplay: linedisp: Add missing header(s) auxdisplay: linedisp: Unshadow error codes in ->store() auxdisplay: linedisp: Use unique number for id ...
-
Ryusuke Konishi authored
Fix a bug where nilfs_get_block() returns a successful status when searching and inserting the specified block both fail inconsistently. If this inconsistent behavior is not due to a previously fixed bug, then an unexpected race is occurring, so return a temporary error -EAGAIN instead. This prevents callers such as __block_write_begin_int() from requesting a read into a buffer that is not mapped, which would cause the BUG_ON check for the BH_Mapped flag in submit_bh_wbc() to fail. Link: https://lkml.kernel.org/r/20240313105827.5296-3-konishi.ryusuke@gmail.com Fixes: 1f5abe7e ("nilfs2: replace BUG_ON and BUG calls triggerable from ioctl") Signed-off-by:
Ryusuke Konishi <konishi.ryusuke@gmail.com> Cc: <stable@vger.kernel.org> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org>
-
Ryusuke Konishi authored
Patch series "nilfs2: fix kernel bug at submit_bh_wbc()". This resolves a kernel BUG reported by syzbot. Since there are two flaws involved, I've made each one a separate patch. The first patch alone resolves the syzbot-reported bug, but I think both fixes should be sent to stable, so I've tagged them as such. This patch (of 2): Syzbot has reported a kernel bug in submit_bh_wbc() when writing file data to a nilfs2 file system whose metadata is corrupted. There are two flaws involved in this issue. The first flaw is that when nilfs_get_block() locates a data block using btree or direct mapping, if the disk address translation routine nilfs_dat_translate() fails with internal code -ENOENT due to DAT metadata corruption, it can be passed back to nilfs_get_block(). This causes nilfs_get_block() to misidentify an existing block as non-existent, causing both data block lookup and insertion to fail inconsistently. The second flaw is that nilfs_get_block() returns a successful status in this inconsistent state. This causes the caller __block_write_begin_int() or others to request a read even though the buffer is not mapped, resulting in a BUG_ON check for the BH_Mapped flag in submit_bh_wbc() failing. This fixes the first issue by changing the return value to code -EINVAL when a conversion using DAT fails with code -ENOENT, avoiding the conflicting condition that leads to the kernel bug described above. Here, code -EINVAL indicates that metadata corruption was detected during the block lookup, which will be properly handled as a file system error and converted to -EIO when passing through the nilfs2 bmap layer. Link: https://lkml.kernel.org/r/20240313105827.5296-1-konishi.ryusuke@gmail.com Link: https://lkml.kernel.org/r/20240313105827.5296-2-konishi.ryusuke@gmail.com Fixes: c3a7abf0 ("nilfs2: support contiguous lookup of blocks") Signed-off-by:
Ryusuke Konishi <konishi.ryusuke@gmail.com> Reported-by:
<syzbot+cfed5b56649bddf80d6e@syzkaller.appspotmail.com> Closes: https://syzkaller.appspot.com/bug?extid=cfed5b56649bddf80d6e Tested-by:
Ryusuke Konishi <konishi.ryusuke@gmail.com> Cc: <stable@vger.kernel.org> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org>
-
Su Yue authored
For special files in S_IFBLK/S_IFCHR/S_IFIFO type, we already have ocfs2_setattr and ocfs2_getattr enabled. It's confusing for user space if it can use setattr/getattr to control one attribute appointed but can not list attributes using listxattr for above type files: $ mknod /mnt/b b 0 0 $ setfattr -h -n trusted.name -v 0xbabe /mnt/b $ getfattr -n trusted.name /mnt/b getfattr: Removing leading '/' from absolute path names trusted.name=0sur4= $ getfattr -m trusted /mnt/b $ Fix it by enabling ocfs2_listxattr for ocfs2_special_file_iops. After the commit, fstests/generic/062 will pass. Link: https://lkml.kernel.org/r/20240312042908.8889-1-l@damenly.org Signed-off-by:
Su Yue <glass.su@suse.com> Acked-by:
Joseph Qi <joseph.qi@linux.alibaba.com> Cc: Mark Fasheh <mark@fasheh.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Junxiao Bi <junxiao.bi@oracle.com> Cc: Changwei Ge <gechangwei@live.cn> Cc: Gang He <ghe@suse.com> Cc: Jun Piao <piaojun@huawei.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org>
-
Chengming Zhou authored
The SLAB_MEM_SPREAD flag is already a no-op as of 6.8-rc1, remove its usage so we can delete it from slab. No functional change. Link: https://lkml.kernel.org/r/20240224135008.829878-1-chengming.zhou@linux.dev Signed-off-by:
Chengming Zhou <zhouchengming@bytedance.com> Acked-by:
Joseph Qi <joseph.qi@linux.alibaba.com> Cc: Mark Fasheh <mark@fasheh.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Junxiao Bi <junxiao.bi@oracle.com> Cc: Changwei Ge <gechangwei@live.cn> Cc: Gang He <ghe@suse.com> Cc: Jun Piao <piaojun@huawei.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org>
-
- Mar 14, 2024
-
-
Paul Moore authored
Passing a NULL buffer into the lsm_get_self_attr() syscall is a valid way to quickly determine the minimum size of the buffer needed to for the syscall to return all of the LSM attributes to the caller. Unfortunately we/I broke that behavior in commit d7cf3412 ("lsm: consolidate buffer size handling into lsm_fill_user_ctx()") such that it returned an error to the caller; this patch restores the original desired behavior of using the NULL buffer as a quick way to correctly size the attribute buffer. Cc: stable@vger.kernel.org Fixes: d7cf3412 ("lsm: consolidate buffer size handling into lsm_fill_user_ctx()") Signed-off-by:
Paul Moore <paul@paul-moore.com>
-
Casey Schaufler authored
Change the size parameters in lsm_list_modules(), lsm_set_self_attr() and lsm_get_self_attr() from size_t to u32. This avoids the need to have different interfaces for 32 and 64 bit systems. Cc: stable@vger.kernel.org Fixes: a04a1198 ("LSM: syscalls for current process attributes") Fixes: ad4aff9e ("LSM: Create lsm_list_modules system call") Signed-off-by:
Casey Schaufler <casey@schaufler-ca.com> Reported-and-reviewed-by:
Dmitry V. Levin <ldv@strace.io> [PM: subject and metadata tweaks, syscall.h fixes] Signed-off-by:
Paul Moore <paul@paul-moore.com>
-
Darrick J. Wong authored
Shrink this percpu object by one array element so that the object size becomes exactly 512 bytes. This will lead to more efficient memory use, hopefully. Signed-off-by:
Darrick J. Wong <djwong@kernel.org> Signed-off-by:
Kent Overstreet <kent.overstreet@linux.dev>
-
Darrick J. Wong authored
Currently, struct time_stats has the optional ability to quantize the information that it collects. This is /probably/ useful for callers who want to see quantized information, but it more than doubles the size of the structure from 224 bytes to 464. For users who don't care about that (e.g. upcoming xfs patches) and want to avoid wasting 240 bytes per counter, split the two into separate pieces. Signed-off-by:
Darrick J. Wong <djwong@kernel.org> Signed-off-by:
Kent Overstreet <kent.overstreet@linux.dev>
-
Darrick J. Wong authored
The only caller of this code (time_stats) always knows the weights and whether or not any information has been collected. Pass this information into the mean and variance code so that it doesn't have to store that information. This reduces the structure size from 24 to 16 bytes, which shrinks each time_stats counter to 192 bytes from 208. Signed-off-by:
Darrick J. Wong <djwong@kernel.org> Signed-off-by:
Kent Overstreet <kent.overstreet@linux.dev>
-
Darrick J. Wong authored
Filesystems can stay mounted for a very long time, so add some larger units. Signed-off-by:
Darrick J. Wong <djwong@kernel.org> Signed-off-by:
Kent Overstreet <kent.overstreet@linux.dev>
-
https://gitlab.freedesktop.org/drm/kernelLinus Torvalds authored
Pull drm updates from Dave Airlie: "Highlights are usual, more AMD IP blocks for future hw, i915/xe changes, Displayport tunnelling support for i915, msm YUV over DP changes, new tests for ttm, but its mostly a lot of stuff all over the place from lots of people. core: - EDID cleanups - scheduler error handling fixes - managed: add drmm_release_action() with tests - add ratelimited drm debug print - DPCD PSR early transport macro - DP tunneling and bandwidth allocation helpers - remove built-in edids - dp: Avoid AUX transfers on powered-down displays - dp: Add VSC SDP helpers cross drivers: - use new drm print helpers - switch to ->read_edid callback - gem: add stats for shared buffers plus updates to amdgpu, i915, xe syncobj: - fixes to waiting and sleeping ttm: - add tests - fix errno codes - simply busy-placement handling - fix page decryption media: - tc358743: fix v4l device registration video: - move all kernel parameters for video behind CONFIG_VIDEO sound: - remove <drm/drm_edid.h> include from header ci: - add tests for msm - fix apq8016 runner efifb: - use copy of global screen_info state vesafb: - use copy of global screen_info state simplefb: - fix logging bridge: - ite-6505: fix DP link-training bug - samsung-dsim: fix error checking in probe - samsung-dsim: add bsh-smm-s2/pro boards - tc358767: fix regmap usage - imx: add i.MX8MP HDMI PVI plus DT bindings - imx: add i.MX8MP HDMI TX plus DT bindings - sii902x: fix probing and unregistration - tc358767: limit pixel PLL input range - switch to new drm_bridge_read_edid() interface panel: - ltk050h3146w: error-handling fixes - panel-edp: support delay between power-on and enable; use put_sync in unprepare; support Mediatek MT8173 Chromebooks, BOE NV116WHM-N49 V8.0, BOE NV122WUM-N41, CSO MNC207QS1-1 plus DT bindings - panel-lvds: support EDT ETML0700Z9NDHA plus DT bindings - panel-novatek: FRIDA FRD400B25025-A-CTK plus DT bindings - add BOE TH101MB31IG002-28A plus DT bindings - add EDT ETML1010G3DRA plus DT bindings - add Novatek NT36672E LCD DSI plus DT bindings - nt36523: support 120Hz timings, fix includes - simple: fix display timings on RK32FN48H - visionox-vtdr6130: fix initialization - add Powkiddy RGB10MAX3 plus DT bindings - st7703: support panel rotation plus DT bindings - add Himax HX83112A plus DT bindings - ltk500hd1829: add support for ltk101b4029w and admatec 9904370 - simple: add BOE BP082WX1-100 8.2" panel plus DT bindungs panel-orientation-quirks: - GPD Win Mini amdgpu: - Validate DMABuf imports in compute VMs - Add RAS ACA framework - PSP 13 fixes - Misc code cleanups - Replay fixes - Atom interpretor PS, WS bounds checking - DML2 fixes - Audio fixes - DCN 3.5 Z state fixes - Remove deprecated ida_simple usage - UBSAN fixes - RAS fixes - Enable seq64 infrastructure - DC color block enablement - Documentation updates - DC documentation updates - DMCUB updates - ATHUB 4.1 support - LSDMA 7.0 support - JPEG DPG support - IH 7.0 support - HDP 7.0 support - VCN 5.0 support - SMU 13.0.6 updates - NBIO 7.11 updates - SDMA 6.1 updates - MMHUB 3.3 updates - DCN 3.5.1 support - NBIF 6.3.1 support - VPE 6.1.1 support amdkfd: - Validate DMABuf imports in compute VMs - SVM fixes - Trap handler updates and enhancements - Fix cache size reporting - Relocate the trap handler radeon: - Atom interpretor PS, WS bounds checking - Misc code cleanups xe: - new query for GuC submission version - Remove unused persistent exec_queues - Add vram frequency sysfs attributes - Add the flag XE_VM_BIND_FLAG_DUMPABLE - Drop pre-production workarounds - Drop kunit tests for unsupported platforms - Start pumbling SR-IOV support with memory based interrupts for VF - Allow to map BO in GGTT with PAT index corresponding to XE_CACHE_UC to work with memory based interrupts - Add GuC Doorbells Manager as prep work SR-IOV - Implement additional workarounds for xe2 and MTL - Program a few registers according to perfomance guide spec for Xe2 - Fix remaining 32b build issues and enable it back - Fix build with CONFIG_DEBUG_FS=n - Fix warnings from GuC ABI headers - Introduce Relay Communication for SR-IOV for VF <-> GuC <-> PF - Release mmap mappings on rpm suspend - Disable mid-thread preemption when not properly supported by hardware - Fix xe_exec by reserving extra fence slot for CPU bind - Fix xe_exec with full long running exec queue - Canonicalize addresses where needed for Xe2 and add to devcoredum - Toggle USM support for Xe2 - Only allow 1 ufence per exec / bind IOCTL - Add GuC firmware loading for Lunar Lake - Add XE_VMA_PTE_64K VMA flag i915: - Add more ADL-N PCI IDs - Enable fastboot also on older platforms - Early transport for panel replay and PSR - New ARL PCI IDs - DP TPS4 PHY test pattern support - Unify and improve VSC SDP for PSR and non-PSR cases - Refactor memory regions and improve debug logging - Rework global state serialization - Remove unused CDCLK divider fields - Unify HDCP connector logging format - Use display instead of graphics version in display code - Move VBT and opregion debugfs next to the implementation - Abstract opregion interface, use opaque type - MTL fixes - HPD handling fixes - Add GuC submission interface version query - Atomically invalidate userptr on mmu-notifier - Update handling of MMIO triggered reports - Don't make assumptions about intel_wakeref_t type - Extend driver code of Xe_LPG to Xe_LPG+ - Add flex arrays to struct i915_syncmap - Allow for very slow HuC loading - DP tunneling and bandwidth allocation support msm: - Correct bindings for MSM8976 and SM8650 platforms - Start migration of MDP5 platforms to DPU driver - X1E80100 MDSS support - DPU: - Improve DSC allocation, fixing several important corner cases - Add support for SDM630/SDM660 platforms - Simplify dpu_encoder_phys_ops - Apply fixes targeting DSC support with a single DSC encoder - Apply fixes for HCTL_EN timing configuration - X1E80100 support - Add support for YUV420 over DP - GPU: - fix sc7180 UBWC config - fix a7xx LLC config - new gpu support: a305B, a750, a702 - machine support: SM7150 (different power levels than other a618) - a7xx devcoredump support habanalabs: - configure IRQ affinity according to NUMA node - move HBM MMU page tables inside the HBM - improve device reset - check extended PCIe errors ivpu: - updates to firmware API - refactor BO allocation imx: - use devm_ functions during init hisilicon: - fix EDID includes mgag200: - improve ioremap usage - convert to struct drm_edid - Work around PCI write bursts nouveau: - disp: use kmemdup() - fix EDID includes - documentation fixes qaic: - fixes to BO handling - make use of DRM managed release - fix order of remove operations rockchip: - analogix_dp: get encoder port from DT - inno_hdmi: support HDMI for RK3128 - lvds: error-handling fixes ssd130x: - support SSD133x plus DT bindings tegra: - fix error handling tilcdc: - make use of DRM managed release v3d: - show memory stats in debugfs - Support display MMU page size vc4: - fix error handling in plane prepare_fb - fix framebuffer test in plane helpers virtio: - add venus capset defines vkms: - fix OOB access when programming the LUT - Kconfig improvements vmwgfx: - unmap surface before changing plane state - fix memory leak in error handling - documentation fixes - list command SVGA_3D_CMD_DEFINE_GB_SURFACE_V4 as invalid - fix null-pointer deref in execbuf - refactor display-mode probing - fix fencing for creating cursor MOBs - fix cursor-memory lifetime xlnx: - fix live video input for ZynqMP DPSUB lima: - fix memory leak loongson: - fail if no VRAM present meson: - switch to new drm_bridge_read_edid() interface renesas: - add RZ/G2L DU support plus DT bindings mxsfb: - Use managed mode config sun4i: - HDMI: updates to atomic mode setting mediatek: - Add display driver for MT8188 VDOSYS1 - DSI driver cleanups - Filter modes according to hardware capability - Fix a null pointer crash in mtk_drm_crtc_finish_page_flip etnaviv: - enhancements for NPU and MRT support" * tag 'drm-next-2024-03-13' of https://gitlab.freedesktop.org/drm/kernel: (1420 commits) drm/amd/display: Removed redundant @ symbol to fix kernel-doc warnings in -next repo drm/amd/pm: wait for completion of the EnableGfxImu message drm/amdgpu/soc21: add mode2 asic reset for SMU IP v14.0.1 drm/amdgpu: add smu 14.0.1 support drm/amdgpu: add VPE 6.1.1 discovery support drm/amdgpu/vpe: add VPE 6.1.1 support drm/amdgpu/vpe: don't emit cond exec command under collaborate mode drm/amdgpu/vpe: add collaborate mode support for VPE drm/amdgpu/vpe: add PRED_EXE and COLLAB_SYNC OPCODE drm/amdgpu/vpe: add multi instance VPE support drm/amdgpu/discovery: add nbif v6_3_1 ip block drm/amdgpu: Add nbif v6_3_1 ip block support drm/amdgpu: Add pcie v6_1_0 ip headers (v5) drm/amdgpu: Add nbif v6_3_1 ip headers (v5) arch/powerpc: Remove <linux/fb.h> from backlight code macintosh/via-pmu-backlight: Include <linux/backlight.h> fbdev/chipsfb: Include <linux/backlight.h> drm/etnaviv: Restore some id values drm/amdkfd: make kfd_class constant drm/amdgpu: add ring timeout information in devcoredump ...
-
Kent Overstreet authored
prep work for lifting out of fs/bcachefs/ Signed-off-by:
Kent Overstreet <kent.overstreet@linux.dev>
-