Skip to content
  1. Jan 24, 2023
  3. Jan 23, 2023
    • Heiner Kallweit's avatar
      net: mdio: mux-meson-g12a: use devm_clk_get_enabled to simplify the code · 32e54254
      Heiner Kallweit authored 
      

Use devm_clk_get_enabled() to simplify the code.

Signed-off-by: default avatarHeiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: default avatarJerome Brunet <jbrunet@baylibre.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      32e54254
    • Andy Shevchenko's avatar
      net: mdiobus: Convert to use fwnode_device_is_compatible() · d408ec0b
      Andy Shevchenko authored 
      

Replace open coded fwnode_device_is_compatible() in the driver.

Signed-off-by: default avatarAndy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: default avatarSimon Horman <simon.horman@corigine.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      d408ec0b
    • David S. Miller's avatar
      ethtool: Add and use ethnl_update_bool. · dc0b98a1
      David S. Miller authored 
      

Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      dc0b98a1
    • David S. Miller's avatar
      Merge branch 'enetc-mac-merge-prep' · 7a981431
      David S. Miller authored 
      

Vladimir Oltean says:

====================
ENETC MAC Merge cleanup

This is a preparatory patch set for MAC Merge layer support in enetc via
ethtool. It does the following:

- consolidates a software lockstep register write procedure for the pMAC
- detects per-port frame preemption capability and only writes pMAC
  registers if a pMAC exists
- stops enabling the pMAC by default

Additionally, I noticed some build warnings in the driver which are new
in this kernel version, so patch 1/6 fixes those.
====================

Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      7a981431
    • Vladimir Oltean's avatar
      net: enetc: stop auto-configuring the port pMAC · 086cc080
      Vladimir Oltean authored 
      

The pMAC (ENETC_PFPMR_PMACE) is probably unconditionally enabled in the
enetc driver to allow RX of preemptible packets and not see them as
error frames. I don't know why TX preemption (ENETC_MMCSR_ME) is enabled
though. With no way to say which traffic classes are preemptible (all
are express by default), no preemptible frames would be transmitted
anyway.

Lastly, it may have been believed that the register write lock-step mode
(now deleted) needed the pMAC to be enabled at all times. I don't know
if that's true. However, I've checked that driver writes to PM1
registers do propagate through to the ENETC IP even when the pMAC is
disabled.

With such incomplete support for frame preemption, it's best to just
remove whatever exists right now and come with something more coherent
later.

Signed-off-by: default avatarVladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      086cc080
    • Vladimir Oltean's avatar
      net: enetc: implement software lockstep for port MAC registers · 12717dec
      Vladimir Oltean authored 
      

Currently the enetc driver duplicates its writes to the PM0 registers
also to PM1, but it doesn't do this consistently - for example we write
to ENETC_PM0_MAXFRM but not to ENETC_PM1_MAXFRM.

Create enetc_port_mac_wr() which writes both the PM0 and PM1 register
with the same value (if frame preemption is supported on this port).
Also create enetc_port_mac_rd() which reads from PM0 - the assumption
being that PM1 contains just the same value.

This will be necessary when we enable the MAC Merge layer properly, and
the pMAC becomes operational.

Signed-off-by: default avatarVladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      12717dec
    • Vladimir Oltean's avatar
      net: enetc: stop configuring pMAC in lockstep with eMAC · 219355f1
      Vladimir Oltean authored 
      

The MWLM bit (MAC write lock-step mode) allows register writes to the
pMAC to be auto-performed whenever the corresponding eMAC register is
written by the driver. This allows their configuration to remain
in sync.

The driver has set this bit since the initial commit, but it doesn't do
anything, since the hardware feature doesn't work (and the bit has been
removed from more recent versions of the documentation).

The driver does attempt, more or less, to keep those MAC registers in
sync by writing the same value once to e.g. ENETC_PM0_CMD_CFG (eMAC) and
once to ENETC_PM1_CMD_CFG (pMAC). Because the lockstep feature doesn't
work, that's what it will stick to.

Signed-off-by: default avatarVladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      219355f1
    • Vladimir Oltean's avatar
      net: enetc: add definition for offset between eMAC and pMAC regs · 9c949e0b
      Vladimir Oltean authored 
      

This is a preliminary patch which replaces the hardcoded 0x1000 present
in other PM1 (port MAC 1, aka pMAC) register definitions, which is an
offset to the PM0 (port MAC 0, aka eMAC) equivalent register.
This definition will be used in more places by future code.

Signed-off-by: default avatarVladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      9c949e0b
    • Vladimir Oltean's avatar
      net: enetc: detect frame preemption hardware capability · 94557a9a
      Vladimir Oltean authored 
      

Similar to other TSN features, query the Station Interface capability
register to see whether preemption is supported on this port or not.
On LS1028A, preemption is available on ports 0 and 2, but not on 1
and 3.

This will allow us in the future to write the pMAC registers only on the
ENETC ports where a pMAC actually exists.

Signed-off-by: default avatarVladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      94557a9a
    • Vladimir Oltean's avatar
      net: enetc: build common object files into a separate module · e3972399
      Vladimir Oltean authored 
      

The build system is complaining about the following:

enetc.o is added to multiple modules: fsl-enetc fsl-enetc-vf
enetc_cbdr.o is added to multiple modules: fsl-enetc fsl-enetc-vf
enetc_ethtool.o is added to multiple modules: fsl-enetc fsl-enetc-vf

Signed-off-by: default avatarVladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      e3972399
    • David S. Miller's avatar
      Merge branch 'ethtool-mac-merge' · f3c6e128
      David S. Miller authored 
      Vladimir Oltean says:

====================
ethtool support for IEEE 802.3 MAC Merge layer

Change log
----------

v3->v4:
- add missing opening bracket in ocelot_port_mm_irq()
- moved cfg.verify_time range checking so that it actually takes place
  for the updated rather than old value
v3 at:
https://patchwork.kernel.org/project/netdevbpf/cover/20230117085947.2176464-1-vladimir.oltean@nxp.com/

v2->v3:
- made get_mm return int instead of void
- deleted ETHTOOL_A_MM_SUPPORTED
- renamed ETHTOOL_A_MM_ADD_FRAG_SIZE to ETHTOOL_A_MM_TX_MIN_FRAG_SIZE
- introduced ETHTOOL_A_MM_RX_MIN_FRAG_SIZE
- cleaned up documentation
- rebased on top of PLCA changes
- renamed ETHTOOL_STATS_SRC_* to ETHTOOL_MAC_STATS_SRC_*
v2 at:
https://patchwork.kernel.org/project/netdevbpf/cover/20230111161706.1465242-1-vladimir.oltean@nxp.com/

v1->v2:
I've decided to focus just on the MAC Merge layer for now, which is why
I am able to submit this patch set as non-RFC.
v1 (RFC) at:
https://patchwork.kernel.org/project/netdevbpf/cover/20220816222920.1952936-1-vladimir.oltean@nxp.com/

What is being introduced
------------------------

TL;DR: a MAC Merge layer as defined by IEEE 802.3-2018, clause 99
(interspersing of express traffic). This is controlled through ethtool
netlink (ETHTOOL_MSG_MM_GET, ETHTOOL_MSG_MM_SET). The raw ethtool
commands are posted here:
https://patchwork.kernel.org/project/netdevbpf/cover/20230111153638.1454687-1-vladimir.oltean@nxp.com/

The MAC Merge layer has its own statistics counters
(ethtool --include-statistics --show-mm swp0) as well as two member
MACs, the statistics of which can be queried individually, through a new
ethtool netlink attribute, corresponding to:

$ ethtool -I --show-pause eno2 --src aggregate
$ ethtool -S eno2 --groups eth-mac eth-phy eth-ctrl rmon -- --src pmac

The core properties of the MAC Merge layer are described in great detail
in patches 02/12 and 03/12. They can be viewed in "make htmldocs" format.

Devices for which the API is supported
--------------------------------------

I decided to start with the Ethernet switch on NXP LS1028A (Felix)
because of the smaller patch set. I also have support for the ENETC
controller pending.

I would like to get confirmation that the UAPI being proposed here will
not restrict any use cases known by other hardware vendors.

Why is support for preemptible traffic classes not here?
--------------------------------------------------------

There is legitimate concern whether the 802.1Q portion of the standard
(which traffic classes go to the eMAC and which to the pMAC) should be
modeled in Linux using tc or using another UAPI. I think that is
stalling the entire series, but should be discussed separately instead.
Removing FP adminStatus support makes me confident enough to submit this
patch set without an RFC tag (meaning: I wouldn't mind if it was merged
as is).

What is submitted here is sufficient for an LLDP daemon to do its job.
I've patched openlldp to advertise and configure frame preemption:
https://github.com/vladimiroltean/openlldp/tree/frame-preemption-v3



In case someone wants to try it out, here are some commands I've used.

 # Configure the interfaces to receive and transmit LLDP Data Units
 lldptool -L -i eno0 adminStatus=rxtx
 lldptool -L -i swp0 adminStatus=rxtx
 # Enable the transmission of certain TLVs on switch's interface
 lldptool -T -i eno0 -V addEthCap enableTx=yes
 lldptool -T -i swp0 -V addEthCap enableTx=yes
 # Query LLDP statistics on switch's interface
 lldptool -S -i swp0
 # Query the received neighbor TLVs
 lldptool -i swp0 -t -n -V addEthCap
 Additional Ethernet Capabilities TLV
         Preemption capability supported
         Preemption capability enabled
         Preemption capability active
         Additional fragment size: 60 octets

So using this patch set, lldpad will be able to advertise and configure
frame preemption, but still, no data packet will be sent as preemptible
over the link, because there is no UAPI to control which traffic classes
are sent as preemptible and which as express.

Preemptable or preemptible?
---------------------------

IEEE 802.3 uses "preemptable" throughout. IEEE 802.1Q uses "preemptible"
throughout. Because the definition of "preemptible" falls under 802.1Q's
jurisdiction and 802.3 just references it, I went with the 802.1Q naming
even where supporting an 802.3 feature. Also, checkpatch agrees with this.
====================

Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      f3c6e128
    • Vladimir Oltean's avatar
      net: mscc: ocelot: add MAC Merge layer support for VSC9959 · 6505b680
      Vladimir Oltean authored 
      

Felix (VSC9959) has a DEV_GMII:MM_CONFIG block composed of 2 registers
(ENABLE_CONFIG and VERIF_CONFIG). Because the MAC Merge statistics and
pMAC statistics are already in the Ocelot switch lib even if just Felix
supports them, I'm adding support for the whole MAC Merge layer in the
common Ocelot library too.

There is an interrupt (shared with the PTP interrupt) which signals
changes to the MM verification state. This is done because the
preemptible traffic classes should be committed to hardware only once
the verification procedure has declared the link partner of being
capable of receiving preemptible frames.

We implement ethtool getters and setters for the MAC Merge layer state.
The "TX enabled" and "verify status" are taken from the IRQ handler,
using a mutex to ensure serialized access.

Signed-off-by: default avatarVladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      6505b680
    • Vladimir Oltean's avatar
      net: mscc: ocelot: export ethtool MAC Merge stats for Felix VSC9959 · ab3f97a9
      Vladimir Oltean authored 
      

The Felix VSC9959 switch supports frame preemption and has a MAC Merge
layer. In addition to the structured stats that exist for the eMAC,
export the counters associated with its pMAC (pause, RMON, MAC, PHY,
control) plus the high-level MAC Merge layer stats. The unstructured
ethtool counters, as well as the rtnl_link_stats64 were left to report
only the eMAC counters.

Because statistics processing is quite self-contained in ocelot_stats.c
now, I've opted for introducing an ocelot->mm_supported bool, based on
which the common switch lib does everything, rather than pushing the
TSN-specific code in felix_vsc9959.c, as happens for other TSN stuff.

Signed-off-by: default avatarVladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      ab3f97a9
    • Vladimir Oltean's avatar
      net: mscc: ocelot: hide access to ocelot_stats_layout behind a helper · 497eea9f
      Vladimir Oltean authored 
      

Some hardware instances of the ocelot driver support the MAC Merge
layer, which gives access to an extra preemptible MAC. This has
implications upon the statistics. There will be a stats layout when MM
isn't supported, and a different one when it is.
The ocelot_stats_layout() helper will return the correct one.
In preparation of that, refactor the existing code to use this helper.

Signed-off-by: default avatarVladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      497eea9f
    • Vladimir Oltean's avatar
      net: mscc: ocelot: allow ocelot_stat_layout elements with no name · 1a733bbd
      Vladimir Oltean authored 
      

We will add support for pMAC counters and MAC merge layer counters,
which are only reported via the structured stats, and the current
ocelot_get_strings() stands in our way, because it expects that the
statistics should be placed in the data array at the same index as found
in the ocelot_stats_layout array.

That is not true. Statistics which don't have a name should not be
exported to the unstructured ethtool -S, so we need to have different
indices into the ocelot_stats_layout array (i) and into the data array
(data itself).

Signed-off-by: default avatarVladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      1a733bbd
    • Vladimir Oltean's avatar
      net: dsa: add plumbing for changing and getting MAC merge layer state · 5f6c2d49
      Vladimir Oltean authored 
      

The DSA core is in charge of the ethtool_ops of the net devices
associated with switch ports, so in case a hardware driver supports the
MAC merge layer, DSA must pass the callbacks through to the driver.
Add support for precisely that.

Signed-off-by: default avatarVladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      5f6c2d49
    • Vladimir Oltean's avatar
      net: ethtool: add helpers for MM fragment size translation · dd1c4164
      Vladimir Oltean authored 
      

We deliberately make the Linux UAPI pass the minimum fragment size in
octets, even though IEEE 802.3 defines it as discrete values, and
addFragSize is just the multiplier. This is because there is nothing
impossible in operating with an in-between value for the fragment size
of non-final preempted fragments, and there may even appear hardware
which supports the in-between sizes.

For the hardware which just understands the addFragSize multiplier,
create two helpers which translate back and forth the values passed in
octets.

Signed-off-by: default avatarVladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      dd1c4164
    • Vladimir Oltean's avatar
      net: ethtool: add helpers for aggregate statistics · 449c5459
      Vladimir Oltean authored 
      

When a pMAC exists but the driver is unable to atomically query the
aggregate eMAC+pMAC statistics, the user should be given back at least
the sum of eMAC and pMAC counters queried separately.

This is a generic problem, so add helpers in ethtool to do this
operation, if the driver doesn't have a better way to report aggregate
stats. Do this in a way that does not require changes to these functions
when new stats are added (basically treat the structures as an array of
u64 values, except for the first element which is the stats source).

In include/linux/ethtool.h, there is already a section where helper
function prototypes should be placed. The trouble is, this section is
too early, before the definitions of struct ethtool_eth_mac_stats et.al.
Move that section at the end and append these new helpers to it.

Signed-off-by: default avatarVladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      449c5459
    • Vladimir Oltean's avatar
      docs: ethtool: document ETHTOOL_A_STATS_SRC and ETHTOOL_A_PAUSE_STATS_SRC · c319df10
      Vladimir Oltean authored 
      

Two new netlink attributes were added to PAUSE_GET and STATS_GET and
their replies. Document them.

Signed-off-by: default avatarVladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      c319df10