- Apr 15, 2021
-
-
Elad Grupi authoredIn case there is an io that contains inline data and it goes to parsing error flow, command response will free command and iov before clearing the data on the socket buffer. This will delay the command response until receive flow is completed. Fixes: 872d26a3 ("nvmet-tcp: add NVMe over TCP target driver") Signed-off-by:
Elad Grupi <elad.grupi@dell.com>
Signed-off-by: Hou Pu <houpu.main@gmail.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
-
- Apr 13, 2021
-
-
Christoph Hellwig authored
Lightnvm was an innovative idea to expose more low-level control over SSDs. But it failed to get properly standardized and remains a non-standarized extension to NVMe that requires vendor specific quirks for a few now mostly obsolete SSD devices. The standardized ZNS command set for NVMe has take over a lot of the approaches and allows for fully standardized operation. Remove the Linux code to support open channel SSDs as the few production deployments of the above mentioned SSDs are using userspace driver stacks instead of the fairly limited Linux support. Signed-off-by:
Christoph Hellwig <hch@lst.de>
Reviewed-by: Javier González <javier@javigon.com>
Signed-off-by: Matias Bjørling <mb@lightnvm.io>
Link: https://lore.kernel.org/r/20210413105257.159260-5-matias.bjorling@wdc.com
Signed-off-by: Jens Axboe <axboe@kernel.dk> -
Zhang Yunkai authored
'linux/blkdev.h' and 'uapi/linux/lightnvm.h' included in 'lightnvm.h' is duplicated.It is also included in the 5th and 7th line. Signed-off-by:
Zhang Yunkai <zhang.yunkai@zte.com.cn>
Signed-off-by: Matias Bjørling <matias.bjorling@wdc.com>
Link: https://lore.kernel.org/r/20210413105257.159260-4-matias.bjorling@wdc.com
Signed-off-by: Jens Axboe <axboe@kernel.dk> -
Tian Tao authored
When memdup_user returns an error, memdup_user has two different return values, use PTR_ERR to get the correct return value. Signed-off-by:
Tian Tao <tiantao6@hisilicon.com>
Signed-off-by: Matias Bjørling <matias.bjorling@wdc.com>
Link: https://lore.kernel.org/r/20210413105257.159260-3-matias.bjorling@wdc.com
Signed-off-by: Jens Axboe <axboe@kernel.dk> -
Chaitanya Kulkarni authored
This fixs coccicheck warning: drivers/nvme//host/lightnvm.c:1243:60-61: WARNING opportunity for kobj_to_dev() Signed-off-by:
Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: Matias Bjørling <matias.bjorling@wdc.com>
Link: https://lore.kernel.org/r/20210413105257.159260-2-matias.bjorling@wdc.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
-
- Apr 12, 2021
-
-
Christoph Hellwig authored
Now that md has been cleaned up we can get rid of this hack. Signed-off-by:
Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk> -
Max Gurtovoy authored
This will enable changing the virtual boundary of null blk devices. For now, null blk devices didn't have any restriction on the scatter/gather elements received from the block layer. Add a module parameter and a configfs option that will control the virtual boundary. This will enable testing the efficiency of the block layer bounce buffer in case a suitable application will send discontiguous IO to the given device. Initial testing with patched FIO showed the following results (64 jobs, 128 iodepth, 1 nullb device): IO size READ (virt=false) READ (virt=true) Write (virt=false) Write (virt=true) ---------- ------------------- ----------------- ------------------- ------------------- 1k 10.7M 8482k 10.8M 8471k 2k 10.4M 8266k 10.4M 8271k 4k 10.4M 8274k 10.3M 8226k 8k 10.2M 8131k 9800k 7933k 16k 9567k 7764k 8081k 6828k 32k 8865k 7309k 5570k 5153k 64k 7695k 6586k 2682k 2617k 128k 5346k 5489k 1320k 1296k Signed-off-by:
Max Gurtovoy <mgurtovoy@nvidia.com>
Reviewed-by: Damien Le Moal <damien.lemoal@wdc.com>
Link: https://lore.kernel.org/r/20210412095523.278632-1-mgurtovoy@nvidia.com
Signed-off-by: Jens Axboe <axboe@kernel.dk> -
Chaitanya Kulkarni authored
Use the right name for the struct request variable that removes the following compilation error :- make --silent --keep-going --jobs=8 O=/home/tuxbuild/.cache/tuxmake/builds/1/tmp ARCH=sh CROSS_COMPILE=sh4-linux-gnu- 'CC=sccache sh4-linux-gnu-gcc' 'HOSTCC=sccache gcc' In file included from /builds/linux/include/linux/scatterlist.h:9, from /builds/linux/include/linux/dma-mapping.h:10, from /builds/linux/drivers/cdrom/gdrom.c:16: /builds/linux/drivers/cdrom/gdrom.c: In function 'gdrom_readdisk_dma': /builds/linux/drivers/cdrom/gdrom.c:586:61: error: 'rq' undeclared (first use in this function) 586 | __raw_writel(page_to_phys(bio_page(req->bio)) + bio_offset(rq->bio), | ^~ Fixes: 1d2c8200 ("gdrom: support highmem") Reported-by:Naresh Kamboju <naresh.kamboju@linaro.org>
Tested-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
-
- Apr 11, 2021
-
-
Coly Li authored
The patch "bcache: remove PTR_CACHE" introduces a compiling failure in debug.c with following error message, In file included from drivers/md/bcache/bcache.h:182:0, from drivers/md/bcache/debug.c:9: drivers/md/bcache/debug.c: In function 'bch_btree_verify': drivers/md/bcache/debug.c:53:19: error: 'c' undeclared (first use in this function) bio_set_dev(bio, c->cache->bdev); ^ This patch fixes the regression by replacing c->cache->bdev by b->c-> cache->bdev. Signed-off-by:Coly Li <colyli@suse.de>
Cc: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20210411134316.80274-8-colyli@suse.de
Signed-off-by: Jens Axboe <axboe@kernel.dk> -
Gustavo A. R. Silva authored
Cast multiple variables to (int64_t) in order to give the compiler complete information about the proper arithmetic to use. Notice that these variables are being used in contexts that expect expressions of type int64_t (64 bit, signed). And currently, such expressions are being evaluated using 32-bit arithmetic. Fixes: d0cf9503 ("octeontx2-pf: ethtool fec mode support") Addresses-Coverity-ID: 1501724 ("Unintentional integer overflow") Addresses-Coverity-ID: 1501725 ("Unintentional integer overflow") Addresses-Coverity-ID: 1501726 ("Unintentional integer overflow") Signed-off-by:
Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Coly Li <colyli@suse.de>
Link: https://lore.kernel.org/r/20210411134316.80274-7-colyli@suse.de
Signed-off-by: Jens Axboe <axboe@kernel.dk> -
Bhaskar Chowdhury authored
s/condidate/candidate/ s/folowing/following/ Signed-off-by:
Bhaskar Chowdhury <unixbhaskar@gmail.com>
Signed-off-by: Coly Li <colyli@suse.de>
Link: https://lore.kernel.org/r/20210411134316.80274-6-colyli@suse.de
Signed-off-by: Jens Axboe <axboe@kernel.dk> -
Arnd Bergmann authored
building with 'make W=1' shows a harmless warning for each user of the EBUG_ON() macro: drivers/md/bcache/bset.c: In function 'bch_btree_sort_partial': drivers/md/bcache/util.h:30:55: error: suggest braces around empty body in an 'if' statement [-Werror=empty-body] 30 | #define EBUG_ON(cond) do { if (cond); } while (0) | ^ drivers/md/bcache/bset.c:1312:9: note: in expansion of macro 'EBUG_ON' 1312 | EBUG_ON(oldsize >= 0 && bch_count_data(b) != oldsize); | ^~~~~~~ Reword the macro slightly to avoid the warning. Signed-off-by:Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Coly Li <colyli@suse.de>
Link: https://lore.kernel.org/r/20210411134316.80274-5-colyli@suse.de
Signed-off-by: Jens Axboe <axboe@kernel.dk> -
Yang Li authored
This fixes the following sparse warnings: drivers/md/bcache/features.c:22:16: warning: Using plain integer as NULL pointer Reported-by:
Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Signed-off-by: Coly Li <colyli@suse.de>
Link: https://lore.kernel.org/r/20210411134316.80274-4-colyli@suse.de
Signed-off-by: Jens Axboe <axboe@kernel.dk> -
Christoph Hellwig authored
Remove the PTR_CACHE inline and replace it with a direct dereference of c->cache. (Coly Li: fix the typo from PTR_BUCKET to PTR_CACHE in commit log) Signed-off-by:
Christoph Hellwig <hch@lst.de>
Signed-off-by: Coly Li <colyli@suse.de>
Link: https://lore.kernel.org/r/20210411134316.80274-3-colyli@suse.de
Signed-off-by: Jens Axboe <axboe@kernel.dk> -
Zhiqiang Liu authored
In bch_cached_dev_run(), free(env[1])|free(env[2])|free(buf) show up three times. This patch introduce out tag in which free(env[1])|free(env[2])|free(buf) are only called one time. If we need to call free() when errors occur, we can set error code to ret, and then goto out tag directly. Signed-off-by:
Zhiqiang Liu <liuzhiqiang26@huawei.com>
Signed-off-by: Coly Li <colyli@suse.de>
Link: https://lore.kernel.org/r/20210411134316.80274-2-colyli@suse.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
-
- Apr 08, 2021
-
-
Jens Axboe authored
Merge branch 'md-next' of https://git.kernel.org/pub/scm/linux/kernel/git/song/md into for-5.13/drivers Pull MD updates from Song: "These patches fix a race condition with md_release() and md_open()." * 'md-next' of https://git.kernel.org/pub/scm/linux/kernel/git/song/md: md: split mddev_find md: factor out a mddev_find_locked helper from mddev_find md: md_open returns -EBUSY when entering racing area
-
Christoph Hellwig authored
Split mddev_find into a simple mddev_find that just finds an existing mddev by the unit number, and a more complicated mddev_find that deals with find or allocating a mddev. This turns out to fix this bug reported by Zhao Heming. ----------------------------- snip ------------------------------ commit d3374825 ("md: make devices disappear when they are no longer needed.") introduced protection between mddev creating & removing. The md_open shouldn't create mddev when all_mddevs list doesn't contain mddev. With currently code logic, there will be very easy to trigger soft lockup in non-preempt env. *** env *** kvm-qemu VM 2C1G with 2 iscsi luns kernel should be non-preempt *** script *** about trigger 1 time with 10 tests `1 node1="15sp3-mdcluster1" 2 node2="15sp3-mdcluster2" 3 4 mdadm -Ss 5 ssh ${node2} "mdadm -Ss" 6 wipefs -a /dev/sda /dev/sdb 7 mdadm -CR /dev/md0 -b clustered -e 1.2 -n 2 -l mirror /dev/sda \ /dev/sdb --assume-clean 8 9 for i in {1..100}; do 10 echo ==== $i ====; 11 12 echo "test ...." 13 ssh ${node2} "mdadm -A /dev/md0 /dev/sda /dev/sdb" 14 sleep 1 15 16 echo "clean ....." 17 ssh ${node2} "mdadm -Ss" 18 done ` I use mdcluster env to trigger soft lockup, but it isn't mdcluster speical bug. To stop md array in mdcluster env will do more jobs than non-cluster array, which will leave enough time/gap to allow kernel to run md_open. *** stack *** `ID: 2831 TASK: ffff8dd7223b5040 CPU: 0 COMMAND: "mdadm" #0 [ffffa15d00a13b90] __schedule at ffffffffb8f1935f #1 [ffffa15d00a13ba8] exact_lock at ffffffffb8a4a66d #2 [ffffa15d00a13bb0] kobj_lookup at ffffffffb8c62fe3 #3 [ffffa15d00a13c28] __blkdev_get at ffffffffb89273b9 #4 [ffffa15d00a13c98] blkdev_get at ffffffffb8927964 #5 [ffffa15d00a13cb0] do_dentry_open at ffffffffb88dc4b4 #6 [ffffa15d00a13ce0] path_openat at ffffffffb88f0ccc #7 [ffffa15d00a13db8] do_filp_open at ffffffffb88f32bb #8 [ffffa15d00a13ee0] do_sys_open at ffffffffb88ddc7d #9 [ffffa15d00a13f38] do_syscall_64 at ffffffffb86053cb ffffffffb900008c or: [ 884.226509] mddev_put+0x1c/0xe0 [md_mod] [ 884.226515] md_open+0x3c/0xe0 [md_mod] [ 884.226518] __blkdev_get+0x30d/0x710 [ 884.226520] ? bd_acquire+0xd0/0xd0 [ 884.226522] blkdev_get+0x14/0x30 [ 884.226524] do_dentry_open+0x204/0x3a0 [ 884.226531] path_openat+0x2fc/0x1520 [ 884.226534] ? seq_printf+0x4e/0x70 [ 884.226536] do_filp_open+0x9b/0x110 [ 884.226542] ? md_release+0x20/0x20 [md_mod] [ 884.226543] ? seq_read+0x1d8/0x3e0 [ 884.226545] ? kmem_cache_alloc+0x18a/0x270 [ 884.226547] ? do_sys_open+0x1bd/0x260 [ 884.226548] do_sys_open+0x1bd/0x260 [ 884.226551] do_syscall_64+0x5b/0x1e0 [ 884.226554] entry_SYSCALL_64_after_hwframe+0x44/0xa9 ` *** rootcause *** "mdadm -A" (or other array assemble commands) will start a daemon "mdadm --monitor" by default. When "mdadm -Ss" is running, the stop action will wakeup "mdadm --monitor". The "--monitor" daemon will immediately get info from /proc/mdstat. This time mddev in kernel still exist, so /proc/mdstat still show md device, which makes "mdadm --monitor" to open /dev/md0. The previously "mdadm -Ss" is removing action, the "mdadm --monitor" open action will trigger md_open which is creating action. Racing is happening. `<thread 1>: "mdadm -Ss" md_release mddev_put deletes mddev from all_mddevs queue_work for mddev_delayed_delete at this time, "/dev/md0" is still available for opening <thread 2>: "mdadm --monitor ..." md_open + mddev_find can't find mddev of /dev/md0, and create a new mddev and | return. + trigger "if (mddev->gendisk != bdev->bd_disk)" and return -ERESTARTSYS. ` In non-preempt kernel, <thread 2> is occupying on current CPU. and mddev_delayed_delete which was created in <thread 1> also can't be schedule. In preempt kernel, it can also trigger above racing. But kernel doesn't allow one thread running on a CPU all the time. after <thread 2> running some time, the later "mdadm -A" (refer above script line 13) will call md_alloc to alloc a new gendisk for mddev. it will break md_open statement "if (mddev->gendisk != bdev->bd_disk)" and return 0 to caller, the soft lockup is broken. ------------------------------ snip ------------------------------ Cc: stable@vger.kernel.org Fixes: d3374825 ("md: make devices disappear when they are no longer needed.") Reported-by:
Heming Zhao <heming.zhao@suse.com>
Reviewed-by: Heming Zhao <heming.zhao@suse.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Song Liu <song@kernel.org> -
Christoph Hellwig authored
Factor out a self-contained helper to just lookup a mddev by the dev_t "unit". Cc: stable@vger.kernel.org Reviewed-by:
Heming Zhao <heming.zhao@suse.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Song Liu <song@kernel.org> -
Zhao Heming authored
commit d3374825 ("md: make devices disappear when they are no longer needed.") introduced protection between mddev creating & removing. The md_open shouldn't create mddev when all_mddevs list doesn't contain mddev. With currently code logic, there will be very easy to trigger soft lockup in non-preempt env. This patch changes md_open returning from -ERESTARTSYS to -EBUSY, which will break the infinitely retry when md_open enter racing area. This patch is partly fix soft lockup issue, full fix needs mddev_find is split into two functions: mddev_find & mddev_find_or_alloc. And md_open should call new mddev_find (it only does searching job). For more detail, please refer with Christoph's "split mddev_find" patch in later commits. *** env *** kvm-qemu VM 2C1G with 2 iscsi luns kernel should be non-preempt *** script *** about trigger every time with below script ``` 1 node1="mdcluster1" 2 node2="mdcluster2" 3 4 mdadm -Ss 5 ssh ${node2} "mdadm -Ss" 6 wipefs -a /dev/sda /dev/sdb 7 mdadm -CR /dev/md0 -b clustered -e 1.2 -n 2 -l mirror /dev/sda \ /dev/sdb --assume-clean 8 9 for i in {1..10}; do 10 echo ==== $i ====; 11 12 echo "test ...." 13 ssh ${node2} "mdadm -A /dev/md0 /dev/sda /dev/sdb" 14 sleep 1 15 16 echo "clean ....." 17 ssh ${node2} "mdadm -Ss" 18 done ``` I use mdcluster env to trigger soft lockup, but it isn't mdcluster speical bug. To stop md array in mdcluster env will do more jobs than non-cluster array, which will leave enough time/gap to allow kernel to run md_open. *** stack *** ``` [ 884.226509] mddev_put+0x1c/0xe0 [md_mod] [ 884.226515] md_open+0x3c/0xe0 [md_mod] [ 884.226518] __blkdev_get+0x30d/0x710 [ 884.226520] ? bd_acquire+0xd0/0xd0 [ 884.226522] blkdev_get+0x14/0x30 [ 884.226524] do_dentry_open+0x204/0x3a0 [ 884.226531] path_openat+0x2fc/0x1520 [ 884.226534] ? seq_printf+0x4e/0x70 [ 884.226536] do_filp_open+0x9b/0x110 [ 884.226542] ? md_release+0x20/0x20 [md_mod] [ 884.226543] ? seq_read+0x1d8/0x3e0 [ 884.226545] ? kmem_cache_alloc+0x18a/0x270 [ 884.226547] ? do_sys_open+0x1bd/0x260 [ 884.226548] do_sys_open+0x1bd/0x260 [ 884.226551] do_syscall_64+0x5b/0x1e0 [ 884.226554] entry_SYSCALL_64_after_hwframe+0x44/0xa9 ``` *** rootcause *** "mdadm -A" (or other array assemble commands) will start a daemon "mdadm --monitor" by default. When "mdadm -Ss" is running, the stop action will wakeup "mdadm --monitor". The "--monitor" daemon will immediately get info from /proc/mdstat. This time mddev in kernel still exist, so /proc/mdstat still show md device, which makes "mdadm --monitor" to open /dev/md0. The previously "mdadm -Ss" is removing action, the "mdadm --monitor" open action will trigger md_open which is creating action. Racing is happening. ``` <thread 1>: "mdadm -Ss" md_release mddev_put deletes mddev from all_mddevs queue_work for mddev_delayed_delete at this time, "/dev/md0" is still available for opening <thread 2>: "mdadm --monitor ..." md_open + mddev_find can't find mddev of /dev/md0, and create a new mddev and | return. + trigger "if (mddev->gendisk != bdev->bd_disk)" and return -ERESTARTSYS. ``` In non-preempt kernel, <thread 2> is occupying on current CPU. and mddev_delayed_delete which was created in <thread 1> also can't be schedule. In preempt kernel, it can also trigger above racing. But kernel doesn't allow one thread running on a CPU all the time. after <thread 2> running some time, the later "mdadm -A" (refer above script line 13) will call md_alloc to alloc a new gendisk for mddev. it will break md_open statement "if (mddev->gendisk != bdev->bd_disk)" and return 0 to caller, the soft lockup is broken. Cc: stable@vger.kernel.org Reviewed-by:
Christoph Hellwig <hch@lst.de>
Signed-off-by: Zhao Heming <heming.zhao@suse.com>
Signed-off-by: Song Liu <song@kernel.org>
-
- Apr 06, 2021
-
-
Guobin Huang authored
spinlock can be initialized automatically with DEFINE_SPINLOCK() rather than explicitly calling spin_lock_init(). Reported-by:
Hulk Robot <hulkci@huawei.com>
Signed-off-by: Guobin Huang <huangguobin4@huawei.com>
Link: https://lore.kernel.org/r/1617710988-49205-1-git-send-email-huangguobin4@huawei.com
Signed-off-by: Jens Axboe <axboe@kernel.dk> -
Christoph Hellwig authored
swim3 only uses the virtual address of a bio to stash it into the data transfer using virt_to_bus. But the ppc32 virt_to_bus just uses the physical address with an offset. Replace virt_to_bus with a local hack that performs the equivalent transformation and stop asking for block layer bounce buffering. Signed-off-by:
Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20210406061839.811588-1-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk> -
Christoph Hellwig authored
Always use the track buffer that is already used for addresses outside the 16MB address capability of the floppy controller. This allows to remove a lot of code that relies on kernel virtual addresses. With this gone there is just a single place left that looks at the bio, which can be converted to memcpy_{from,to}_page, thus removing the need for the extra block-layer bounce buffering for highmem pages. Signed-off-by:Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20210406061755.811522-1-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk> -
Christoph Hellwig authored
m68k doesn't support highmem, so don't bother enabling the block layer bounce buffer code. Just for safety throw in a depend on !HIGHMEM. Signed-off-by:
Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20210406061725.811389-1-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk> -
Christoph Hellwig authored
The gdrom driver only has a single reference to the virtual address of the bio data, and uses that only to get the physical address. Switch to deriving the physical address from the page directly and thus avoid bounce buffering highmem data. Signed-off-by:
Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20210406061648.811275-1-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk> -
Lee Jones authored
Fixes the following W=1 kernel build warning(s): from drivers/block/drbd/drbd_nl.c:24: drivers/block/drbd/drbd_nl.c: In function ‘drbd_adm_attach’: drivers/block/drbd/drbd_nl.c:1968:10: warning: implicit conversion from ‘enum drbd_state_rv’ to ‘enum drbd_ret_code’ [-Wenum-conversion] drivers/block/drbd/drbd_nl.c:930: warning: Function parameter or member 'flags' not described in 'drbd_determine_dev_size' drivers/block/drbd/drbd_nl.c:930: warning: Function parameter or member 'rs' not described in 'drbd_determine_dev_size' drivers/block/drbd/drbd_nl.c:1148: warning: Function parameter or member 'dc' not described in 'drbd_check_al_size' Cc: Philipp Reisner <philipp.reisner@linbit.com> Cc: Lars Ellenberg <lars.ellenberg@linbit.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: drbd-dev@lists.linbit.com Cc: linux-block@vger.kernel.org Signed-off-by:
Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20210312105530.2219008-12-lee.jones@linaro.org
Signed-off-by: Jens Axboe <axboe@kernel.dk> -
Lee Jones authored
Fixes the following W=1 kernel build warning(s): drivers/block/xen-blkfront.c:1960: warning: Function parameter or member 'dev' not described in 'blkfront_probe' drivers/block/xen-blkfront.c:1960: warning: Function parameter or member 'id' not described in 'blkfront_probe' drivers/block/xen-blkfront.c:1960: warning: expecting prototype for Allocate the basic(). Prototype was for blkfront_probe() instead drivers/block/xen-blkfront.c:2085: warning: Function parameter or member 'dev' not described in 'blkfront_resume' drivers/block/xen-blkfront.c:2085: warning: expecting prototype for or a backend(). Prototype was for blkfront_resume() instead drivers/block/xen-blkfront.c:2444: warning: wrong kernel-doc identifier on line: Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: "Roger Pau Monné" <roger.pau@citrix.com> Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com> Cc: Juergen Gross <jgross@suse.com> Cc: Stefano Stabellini <sstabellini@kernel.org> Cc: Jens Axboe <axboe@kernel.dk> Cc: xen-devel@lists.xenproject.org Cc: linux-block@vger.kernel.org Signed-off-by:
Lee Jones <lee.jones@linaro.org>
Acked-by: Roger Pau Monné <roger.pau@citrix.com>
Link: https://lore.kernel.org/r/20210312105530.2219008-11-lee.jones@linaro.org
Signed-off-by: Jens Axboe <axboe@kernel.dk> -
Lee Jones authored
Fixes the following W=1 kernel build warning(s): drivers/block/drbd/drbd_receiver.c:1641: warning: Function parameter or member 'op' not described in 'drbd_submit_peer_request' drivers/block/drbd/drbd_receiver.c:1641: warning: Function parameter or member 'op_flags' not described in 'drbd_submit_peer_request' drivers/block/drbd/drbd_receiver.c:1641: warning: Function parameter or member 'fault_type' not described in 'drbd_submit_peer_request' Cc: Philipp Reisner <philipp.reisner@linbit.com> Cc: Lars Ellenberg <lars.ellenberg@linbit.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: drbd-dev@lists.linbit.com Cc: linux-block@vger.kernel.org Signed-off-by:
Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20210312105530.2219008-10-lee.jones@linaro.org
Signed-off-by: Jens Axboe <axboe@kernel.dk> -
Lee Jones authored
Fixes the following W=1 kernel build warning(s): drivers/block/drbd/drbd_main.c:278: warning: Function parameter or member 'connection' not described in 'tl_clear' drivers/block/drbd/drbd_main.c:278: warning: Excess function parameter 'device' description in 'tl_clear' drivers/block/drbd/drbd_main.c:489: warning: Function parameter or member 'cpu_mask' not described in 'drbd_calc_cpu_mask' drivers/block/drbd/drbd_main.c:528: warning: Excess function parameter 'device' description in 'drbd_thread_current_set_cpu' drivers/block/drbd/drbd_main.c:549: warning: Function parameter or member 'connection' not described in 'drbd_header_size' drivers/block/drbd/drbd_main.c:1204: warning: Function parameter or member 'device' not described in 'send_bitmap_rle_or_plain' drivers/block/drbd/drbd_main.c:1204: warning: Function parameter or member 'c' not described in 'send_bitmap_rle_or_plain' drivers/block/drbd/drbd_main.c:1335: warning: Function parameter or member 'peer_device' not described in '_drbd_send_ack' drivers/block/drbd/drbd_main.c:1335: warning: Excess function parameter 'device' description in '_drbd_send_ack' drivers/block/drbd/drbd_main.c:1379: warning: Function parameter or member 'peer_device' not described in 'drbd_send_ack' drivers/block/drbd/drbd_main.c:1379: warning: Excess function parameter 'device' description in 'drbd_send_ack' drivers/block/drbd/drbd_main.c:1892: warning: Function parameter or member 'connection' not described in 'drbd_send_all' drivers/block/drbd/drbd_main.c:1892: warning: Function parameter or member 'sock' not described in 'drbd_send_all' drivers/block/drbd/drbd_main.c:1892: warning: Function parameter or member 'buffer' not described in 'drbd_send_all' drivers/block/drbd/drbd_main.c:1892: warning: Function parameter or member 'size' not described in 'drbd_send_all' drivers/block/drbd/drbd_main.c:1892: warning: Function parameter or member 'msg_flags' not described in 'drbd_send_all' drivers/block/drbd/drbd_main.c:3525: warning: Function parameter or member 'flags' not described in 'drbd_queue_bitmap_io' drivers/block/drbd/drbd_main.c:3563: warning: Function parameter or member 'flags' not described in 'drbd_bitmap_io' Cc: Philipp Reisner <philipp.reisner@linbit.com> Cc: Lars Ellenberg <lars.ellenberg@linbit.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: drbd-dev@lists.linbit.com Cc: linux-block@vger.kernel.org Signed-off-by:
Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20210312105530.2219008-9-lee.jones@linaro.org
Signed-off-by: Jens Axboe <axboe@kernel.dk> -
Lee Jones authored
Fixes the following W=1 kernel build warning(s): from drivers/block/drbd/drbd_nl.c:24: drivers/block/drbd/drbd_nl.c: In function ‘drbd_adm_set_role’: drivers/block/drbd/drbd_nl.c:793:11: warning: implicit conversion from ‘enum drbd_state_rv’ to ‘enum drbd_ret_code’ [-Wenum-conversion] drivers/block/drbd/drbd_nl.c:795:11: warning: implicit conversion from ‘enum drbd_state_rv’ to ‘enum drbd_ret_code’ [-Wenum-conversion] drivers/block/drbd/drbd_nl.c: In function ‘drbd_adm_attach’: drivers/block/drbd/drbd_nl.c:1965:10: warning: implicit conversion from ‘enum drbd_state_rv’ to ‘enum drbd_ret_code’ [-Wenum-conversion] drivers/block/drbd/drbd_nl.c: In function ‘drbd_adm_connect’: drivers/block/drbd/drbd_nl.c:2690:10: warning: implicit conversion from ‘enum drbd_state_rv’ to ‘enum drbd_ret_code’ [-Wenum-conversion] drivers/block/drbd/drbd_nl.c: In function ‘drbd_adm_disconnect’: drivers/block/drbd/drbd_nl.c:2803:11: warning: implicit conversion from ‘enum drbd_state_rv’ to ‘enum drbd_ret_code’ [-Wenum-conversion] Cc: Philipp Reisner <philipp.reisner@linbit.com> Cc: Lars Ellenberg <lars.ellenberg@linbit.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: drbd-dev@lists.linbit.com Cc: linux-block@vger.kernel.org Signed-off-by:
Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20210312105530.2219008-8-lee.jones@linaro.org
Signed-off-by: Jens Axboe <axboe@kernel.dk> -
Lee Jones authored
[P_RETRY_WRITE] is initialised more than once. Fixes the following W=1 kernel build warning(s): drivers/block/drbd/drbd_main.c: In function ‘cmdname’: drivers/block/drbd/drbd_main.c:3660:22: warning: initialized field overwritten [-Woverride-init] drivers/block/drbd/drbd_main.c:3660:22: note: (near initialization for ‘cmdnames[44]’) Cc: Philipp Reisner <philipp.reisner@linbit.com> Cc: Lars Ellenberg <lars.ellenberg@linbit.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: drbd-dev@lists.linbit.com Cc: linux-block@vger.kernel.org Signed-off-by:
Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20210312105530.2219008-7-lee.jones@linaro.org
Signed-off-by: Jens Axboe <axboe@kernel.dk> -
Lee Jones authored
Fixes the following W=1 kernel build warning(s): drivers/block/drbd/drbd_receiver.c:265: warning: Function parameter or member 'peer_device' not described in 'drbd_alloc_pages' drivers/block/drbd/drbd_receiver.c:265: warning: Excess function parameter 'device' description in 'drbd_alloc_pages' drivers/block/drbd/drbd_receiver.c:1362: warning: Function parameter or member 'connection' not described in 'drbd_may_finish_epoch' drivers/block/drbd/drbd_receiver.c:1362: warning: Excess function parameter 'device' description in 'drbd_may_finish_epoch' drivers/block/drbd/drbd_receiver.c:1451: warning: Function parameter or member 'resource' not described in 'drbd_bump_write_ordering' drivers/block/drbd/drbd_receiver.c:1451: warning: Function parameter or member 'bdev' not described in 'drbd_bump_write_ordering' drivers/block/drbd/drbd_receiver.c:1451: warning: Excess function parameter 'connection' description in 'drbd_bump_write_ordering' drivers/block/drbd/drbd_receiver.c:1643: warning: Function parameter or member 'op' not described in 'drbd_submit_peer_request' drivers/block/drbd/drbd_receiver.c:1643: warning: Function parameter or member 'op_flags' not described in 'drbd_submit_peer_request' drivers/block/drbd/drbd_receiver.c:1643: warning: Function parameter or member 'fault_type' not described in 'drbd_submit_peer_request' drivers/block/drbd/drbd_receiver.c:1643: warning: Excess function parameter 'rw' description in 'drbd_submit_peer_request' drivers/block/drbd/drbd_receiver.c:3055: warning: Function parameter or member 'peer_device' not described in 'drbd_asb_recover_0p' drivers/block/drbd/drbd_receiver.c:3138: warning: Function parameter or member 'peer_device' not described in 'drbd_asb_recover_1p' drivers/block/drbd/drbd_receiver.c:3195: warning: Function parameter or member 'peer_device' not described in 'drbd_asb_recover_2p' drivers/block/drbd/drbd_receiver.c:4684: warning: Function parameter or member 'peer_device' not described in 'receive_bitmap_plain' drivers/block/drbd/drbd_receiver.c:4684: warning: Function parameter or member 'size' not described in 'receive_bitmap_plain' drivers/block/drbd/drbd_receiver.c:4684: warning: Function parameter or member 'p' not described in 'receive_bitmap_plain' drivers/block/drbd/drbd_receiver.c:4684: warning: Function parameter or member 'c' not described in 'receive_bitmap_plain' drivers/block/drbd/drbd_receiver.c:4738: warning: Function parameter or member 'peer_device' not described in 'recv_bm_rle_bits' drivers/block/drbd/drbd_receiver.c:4738: warning: Function parameter or member 'p' not described in 'recv_bm_rle_bits' drivers/block/drbd/drbd_receiver.c:4738: warning: Function parameter or member 'c' not described in 'recv_bm_rle_bits' drivers/block/drbd/drbd_receiver.c:4738: warning: Function parameter or member 'len' not described in 'recv_bm_rle_bits' drivers/block/drbd/drbd_receiver.c:4807: warning: Function parameter or member 'peer_device' not described in 'decode_bitmap_c' drivers/block/drbd/drbd_receiver.c:4807: warning: Function parameter or member 'p' not described in 'decode_bitmap_c' drivers/block/drbd/drbd_receiver.c:4807: warning: Function parameter or member 'c' not described in 'decode_bitmap_c' drivers/block/drbd/drbd_receiver.c:4807: warning: Function parameter or member 'len' not described in 'decode_bitmap_c' Cc: Philipp Reisner <philipp.reisner@linbit.com> Cc: Lars Ellenberg <lars.ellenberg@linbit.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: drbd-dev@lists.linbit.com Cc: linux-block@vger.kernel.org Signed-off-by:
Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20210312105530.2219008-6-lee.jones@linaro.org
Signed-off-by: Jens Axboe <axboe@kernel.dk> -
Lee Jones authored
Fixes the following W=1 kernel build warning(s): drivers/block/drbd/drbd_state.c:913: warning: Function parameter or member 'connection' not described in 'is_valid_soft_transition' drivers/block/drbd/drbd_state.c:913: warning: Excess function parameter 'device' description in 'is_valid_soft_transition' drivers/block/drbd/drbd_state.c:1054: warning: Function parameter or member 'warn' not described in 'sanitize_state' drivers/block/drbd/drbd_state.c:1054: warning: Excess function parameter 'warn_sync_abort' description in 'sanitize_state' drivers/block/drbd/drbd_state.c:1703: warning: Function parameter or member 'state_change' not described in 'after_state_ch' Cc: Philipp Reisner <philipp.reisner@linbit.com> Cc: Lars Ellenberg <lars.ellenberg@linbit.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: drbd-dev@lists.linbit.com Cc: linux-block@vger.kernel.org Signed-off-by:
Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20210312105530.2219008-5-lee.jones@linaro.org
Signed-off-by: Jens Axboe <axboe@kernel.dk> -
Lee Jones authored
Fixes the following W=1 kernel build warning(s): drivers/block/mtip32xx/mtip32xx.c: In function ‘mtip_standby_immediate’: drivers/block/mtip32xx/mtip32xx.c:1216:16: warning: variable ‘start’ set but not used [-Wunused-but-set-variable] Cc: Jens Axboe <axboe@kernel.dk> Cc: linux-block@vger.kernel.org Signed-off-by:
Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20210312105530.2219008-4-lee.jones@linaro.org
Signed-off-by: Jens Axboe <axboe@kernel.dk> -
Lee Jones authored
Fixes the following W=1 kernel build warning(s): drivers/block/drbd/drbd_interval.c:11: warning: Function parameter or member 'node' not described in 'interval_end' drivers/block/drbd/drbd_interval.c:26: warning: Function parameter or member 'root' not described in 'drbd_insert_interval' drivers/block/drbd/drbd_interval.c:26: warning: Function parameter or member 'this' not described in 'drbd_insert_interval' drivers/block/drbd/drbd_interval.c:70: warning: Function parameter or member 'root' not described in 'drbd_contains_interval' drivers/block/drbd/drbd_interval.c:96: warning: Function parameter or member 'root' not described in 'drbd_remove_interval' drivers/block/drbd/drbd_interval.c:96: warning: Function parameter or member 'this' not described in 'drbd_remove_interval' drivers/block/drbd/drbd_interval.c:113: warning: Function parameter or member 'root' not described in 'drbd_find_overlap' Cc: Philipp Reisner <philipp.reisner@linbit.com> Cc: Lars Ellenberg <lars.ellenberg@linbit.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: drbd-dev@lists.linbit.com Cc: linux-block@vger.kernel.org Signed-off-by:
Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20210312105530.2219008-3-lee.jones@linaro.org
Signed-off-by: Jens Axboe <axboe@kernel.dk> -
git://git.infradead.org/nvmeJens Axboe authored
Pull NVMe updates from Christoph: "nvme updates for Linux 5.13 - fix handling of very large MDTS values (Bart Van Assche) - retrigger ANA log update if group descriptor isn't found (Hannes Reinecke) - fix locking contexts in nvme-tcp and nvmet-tcp (Sagi Grimberg) - return proper error code from discovery ctrl (Hou Pu) - verify the SGLS field in nvmet-tcp and nvmet-fc (Max Gurtovoy) - disallow passthru cmd from targeting a nsid != nsid of the block dev (Niklas Cassel) - do not allow model_number exceed 40 bytes in nvmet (Noam Gottlieb) - enable optional queue idle period tracking in nvmet-tcp (Mark Wunderlich) - various cleanups and optimizations (Chaitanya Kulkarni, Kanchan Joshi) - expose fast_io_fail_tmo in sysfs (Daniel Wagner) - implement non-MDTS command limits (Keith Busch) - reduce warnings for unhandled command effects (Keith Busch) - allocate storage for the SQE as part of the nvme_request (Keith Busch)" * tag 'nvme-5.13-2021-04-06' of git://git.infradead.org/nvme: (33 commits) nvme: fix handling of large MDTS values nvme: implement non-mdts command limits nvme: disallow passthru cmd from targeting a nsid != nsid of the block dev nvme: retrigger ANA log update if group descriptor isn't found nvme: export fast_io_fail_tmo to sysfs nvme: remove superfluous else in nvme_ctrl_loss_tmo_store nvme: use sysfs_emit instead of sprintf nvme-fc: check sgl supported by target nvme-tcp: check sgl supported by target nvmet-tcp: enable optional queue idle period tracking nvmet-tcp: fix incorrect locking in state_change sk callback nvme-tcp: block BH in sk state_change sk callback nvmet: return proper error code from discovery ctrl nvme: warn of unhandled effects only once nvme: use driver pdu command for passthrough nvme-pci: allocate nvme_command within driver pdu nvmet: do not allow model_number exceed 40 bytes nvmet: remove unnecessary ctrl parameter nvmet-fc: update function documentation nvme-fc: fix the function documentation comment ...
-
Bart Van Assche authored
Instead of triggering an integer overflow and undefined behavior if MDTS is large, set max_hw_sectors to UINT_MAX. Signed-off-by:
Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Keith Busch <kbusch@kernel.org>
[hch: rebased to account for the new nvme_mps_to_sectors helper]
Signed-off-by: Christoph Hellwig <hch@lst.de> -
Keith Busch authored
Commands that access LBA contents without a data transfer between the host historically have not had a spec defined upper limit. The driver set the queue constraints for such commands to the max data transfer size just to be safe, but this artificial constraint frequently limits devices below their capabilities. The NVMe Workgroup ratified TP4040 defines how a controller may advertise their non-MDTS limits. Use these if provided and default to the current constraints if not. Since the Dataset Management command limits are defined in logical blocks, but without a namespace to tell us the logical block size, the code defaults to the safe 512b size. Signed-off-by:
Keith Busch <kbusch@kernel.org>
Signed-off-by: Christoph Hellwig <hch@lst.de> -
Niklas Cassel authored
When a passthru command targets a specific namespace, the ns parameter to nvme_user_cmd()/nvme_user_cmd64() is set. However, there is currently no validation that the nsid specified in the passthru command targets the namespace/nsid represented by the block device that the ioctl was performed on. Add a check that validates that the nsid in the passthru command matches that of the supplied namespace. Signed-off-by:
Niklas Cassel <niklas.cassel@wdc.com>
Reviewed-by: Javier González <javier@javigon.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Kanchan Joshi <joshi.k@samsung.com>
Signed-off-by: Christoph Hellwig <hch@lst.de> -
Hannes Reinecke authored
If ANA is enabled but no ANA group descriptor is found when creating a new namespace the ANA log is most likely out of date, so trigger a re-read. The namespace will be tagged with the NS_ANA_PENDING flag to exclude it from path selection until the ANA log has been re-read. Fixes: 32acab31 ("nvme: implement multipath access to nvme subsystems") Reported-by:
Martin George <marting@netapp.com>
Signed-off-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
-
- Apr 03, 2021
-
-
Daniel Wagner authored
Commit 8c4dfea9 ("nvme-fabrics: reject I/O to offline device") introduced fast_io_fail_tmo but didn't export the value to sysfs. The value can be set during the 'nvme connect'. Export the timeout value to user space via sysfs to allow runtime configuration. Cc: Victor Gladkov <Victor.Gladkov@kioxia.com> Signed-off-by:
Daniel Wagner <dwagner@suse.de>
Reviewed-by: Ewan D. Milne <emilne@redhat.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Himanshu Madhani <himanshu.madhaani@oracle.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
-