- May 08, 2023
-
-
Linus Torvalds authored
-
Linus Torvalds authored
Merge tag 'perf-tools-for-v6.4-3-2023-05-06' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux Pull perf tool updates from Arnaldo Carvalho de Melo: "Third version of perf tool updates, with the build problems with with using a 'vmlinux.h' generated from the main build fixed, and the bpf skeleton build disabled by default. Build: - Require libtraceevent to build, one can disable it using NO_LIBTRACEEVENT=1. It is required for tools like 'perf sched', 'perf kvm', 'perf trace', etc. libtraceevent is available in most distros so installing 'libtraceevent-devel' should be a one-time event to continue building perf as usual. Using NO_LIBTRACEEVENT=1 produces tooling that is functional and sufficient for lots of users not interested in those libtraceevent dependent features. - Allow Python support in 'perf script' when libtraceevent isn't linked, as not all features requires it, for instance Intel PT does not use tracepoints. - Error if the python interpreter needed for jevents to work isn't available and NO_JEVENTS=1 isn't set, preventing a build without support for JSON vendor events, which is a rare but possible condition. The two check error messages: $(error ERROR: No python interpreter needed for jevents generation. Install python or build with NO_JEVENTS=1.) $(error ERROR: Python interpreter needed for jevents generation too old (older than 3.6). Install a newer python or build with NO_JEVENTS=1.) - Make libbpf 1.0 the minimum required when building with out of tree, distro provided libbpf. - Use libsdtc++'s and LLVM's libcxx's __cxa_demangle, a portable C++ demangler, add 'perf test' entry for it. - Make binutils libraries opt in, as distros disable building with it due to licensing, they were used for C++ demangling, for instance. - Switch libpfm4 to opt-out rather than opt-in, if libpfm-devel (or equivalent) isn't installed, we'll just have a build warning: Makefile.config:1144: libpfm4 not found, disables libpfm4 support. Please install libpfm4-dev - Add a feature test for scandirat(), that is not implemented so far in musl and uclibc, disabling features that need it, such as scanning for tracepoints in /sys/kernel/tracing/events. perf BPF filters: - New feature where BPF can be used to filter samples, for instance: $ sudo ./perf record -e cycles --filter 'period > 1000' true $ sudo ./perf script perf-exec 2273949 546850.708501: 5029 cycles: ffffffff826f9e25 finish_wait+0x5 ([kernel.kallsyms]) perf-exec 2273949 546850.708508: 32409 cycles: ffffffff826f9e25 finish_wait+0x5 ([kernel.kallsyms]) perf-exec 2273949 546850.708526: 143369 cycles: ffffffff82b4cdbf xas_start+0x5f ([kernel.kallsyms]) perf-exec 2273949 546850.708600: 372650 cycles: ffffffff8286b8f7 __pagevec_lru_add+0x117 ([kernel.kallsyms]) perf-exec 2273949 546850.708791: 482953 cycles: ffffffff829190de __mod_memcg_lruvec_state+0x4e ([kernel.kallsyms]) true 2273949 546850.709036: 501985 cycles: ffffffff828add7c tlb_gather_mmu+0x4c ([kernel.kallsyms]) true 2273949 546850.709292: 503065 cycles: 7f2446d97c03 _dl_map_object_deps+0x973 (/usr/lib/x86_64-linux-gnu/ld-linux-x86-64.so.2) - In addition to 'period' (PERF_SAMPLE_PERIOD), the other PERF_SAMPLE_ can be used for filtering, and also some other sample accessible values, from tools/perf/Documentation/perf-record.txt: Essentially the BPF filter expression is: <term> <operator> <value> (("," | "||") <term> <operator> <value>)* The <term> can be one of: ip, id, tid, pid, cpu, time, addr, period, txn, weight, phys_addr, code_pgsz, data_pgsz, weight1, weight2, weight3, ins_lat, retire_lat, p_stage_cyc, mem_op, mem_lvl, mem_snoop, mem_remote, mem_lock, mem_dtlb, mem_blk, mem_hops The <operator> can be one of: ==, !=, >, >=, <, <=, & The <value> can be one of: <number> (for any term) na, load, store, pfetch, exec (for mem_op) l1, l2, l3, l4, cxl, io, any_cache, lfb, ram, pmem (for mem_lvl) na, none, hit, miss, hitm, fwd, peer (for mem_snoop) remote (for mem_remote) na, locked (for mem_locked) na, l1_hit, l1_miss, l2_hit, l2_miss, any_hit, any_miss, walk, fault (for mem_dtlb) na, by_data, by_addr (for mem_blk) hops0, hops1, hops2, hops3 (for mem_hops) perf lock contention: - Show lock type with address. - Track and show mmap_lock, siglock and per-cpu rq_lock with address. This is done for mmap_lock by following the current->mm pointer: $ sudo ./perf lock con -abl -- sleep 10 contended total wait max wait avg wait address symbol ... 16344 312.30 ms 2.22 ms 19.11 us ffff8cc702595640 17686 310.08 ms 1.49 ms 17.53 us ffff8cc7025952c0 3 84.14 ms 45.79 ms 28.05 ms ffff8cc78114c478 mmap_lock 3557 76.80 ms 68.75 us 21.59 us ffff8cc77ca3af58 1 68.27 ms 68.27 ms 68.27 ms ffff8cda745dfd70 9 54.53 ms 7.96 ms 6.06 ms ffff8cc7642a48b8 mmap_lock 14629 44.01 ms 60.00 us 3.01 us ffff8cc7625f9ca0 3481 42.63 ms 140.71 us 12.24 us ffffffff937906ac vmap_area_lock 16194 38.73 ms 42.15 us 2.39 us ffff8cd397cbc560 11 38.44 ms 10.39 ms 3.49 ms ffff8ccd6d12fbb8 mmap_lock 1 5.43 ms 5.43 ms 5.43 ms ffff8cd70018f0d8 1674 5.38 ms 422.93 us 3.21 us ffffffff92e06080 tasklist_lock 581 4.51 ms 130.68 us 7.75 us ffff8cc9b1259058 5 3.52 ms 1.27 ms 703.23 us ffff8cc754510070 112 3.47 ms 56.47 us 31.02 us ffff8ccee38b3120 381 3.31 ms 73.44 us 8.69 us ffffffff93790690 purge_vmap_area_lock 255 3.19 ms 36.35 us 12.49 us ffff8d053ce30c80 - Update default map size to 16384. - Allocate single letter option -M for --map-nr-entries, as it is proving being frequently used. - Fix struct rq lock access for older kernels with BPF's CO-RE (Compile once, run everywhere). - Fix problems found with MSAn. perf report/top: - Add inline information when using --call-graph=fp or lbr, as was already done to the --call-graph=dwarf callchain mode. - Improve the 'srcfile' sort key performance by really using an optimization introduced in 6.2 for the 'srcline' sort key that avoids calling addr2line for comparision with each sample. perf sched: - Make 'perf sched latency/map/replay' to use "sched:sched_waking" instead of "sched:sched_waking", consistent with 'perf record' since d566a9c2 ("perf sched: Prefer sched_waking event when it exists"). perf ftrace: - Make system wide the default target for latency subcommand, run the following command then generate some network traffic and press control+C: # perf ftrace latency -T __kfree_skb ^C DURATION | COUNT | GRAPH | 0 - 1 us | 27 | ############# | 1 - 2 us | 22 | ########### | 2 - 4 us | 8 | #### | 4 - 8 us | 5 | ## | 8 - 16 us | 24 | ############ | 16 - 32 us | 2 | # | 32 - 64 us | 1 | | 64 - 128 us | 0 | | 128 - 256 us | 0 | | 256 - 512 us | 0 | | 512 - 1024 us | 0 | | 1 - 2 ms | 0 | | 2 - 4 ms | 0 | | 4 - 8 ms | 0 | | 8 - 16 ms | 0 | | 16 - 32 ms | 0 | | 32 - 64 ms | 0 | | 64 - 128 ms | 0 | | 128 - 256 ms | 0 | | 256 - 512 ms | 0 | | 512 - 1024 ms | 0 | | 1 - ... s | 0 | | # perf top: - Add --branch-history (LBR: Last Branch Record) option, just like already available for 'perf record'. - Fix segfault in thread__comm_len() where thread->comm was being used outside thread->comm_lock. perf annotate: - Allow configuring objdump and addr2line in ~/.perfconfig., so that you can use alternative binaries, such as llvm's. perf kvm: - Add TUI mode for 'perf kvm stat report'. Reference counting: - Add reference count checking infrastructure to check for use after free, done to the 'cpumap', 'namespaces', 'maps' and 'map' structs, more to come. To build with it use -DREFCNT_CHECKING=1 in the make command line to build tools/perf. Documented at: https://perf.wiki.kernel.org/index.php/Reference_Count_Checking - The above caught, for instance, fix, present in this series: - Fix maps use after put in 'perf test "Share thread maps"': 'maps' is copied from leader, but the leader is put on line 79 and then 'maps' is used to read the reference count below - so a use after put, with the put of maps happening within thread__put. Fixed by reversing the order of puts so that the leader is put last. - Also several fixes were made to places where reference counts were not being held. - Make this one of the tests in 'make -C tools/perf build-test' to regularly build test it and to make sure no direct access to the reference counted structs are made, doing that via accessors to check the validity of the struct pointer. ARM64: - Fix 'perf report' segfault when filtering coresight traces by sparse lists of CPUs. - Add support for 'simd' as a sort field for 'perf report', to show ARM's NEON SIMD's predicate flags: "partial" and "empty". arm64 vendor events: - Add N1 metrics. Intel vendor events: - Add graniterapids, grandridge and sierraforrest events. - Refresh events for: alderlake, aldernaken, broadwell, broadwellde, broadwellx, cascadelakx, haswell, haswellx, icelake, icelakex, jaketown, meteorlake, knightslanding, sandybridge, sapphirerapids, silvermont, skylake, tigerlake and westmereep-dp - Refresh metrics for alderlake-n, broadwell, broadwellde, broadwellx, haswell, haswellx, icelakex, ivybridge, ivytown and skylakex. perf stat: - Implement --topdown using JSON metrics. - Add TopdownL1 JSON metric as a default if present, but disable it for now for some Intel hybrid architectures, a series of patches addressing this is being reviewed and will be submitted for v6.5. - Use metrics for --smi-cost. - Update topdown documentation. Vendor events (JSON) infrastructure: - Add support for computing and printing metric threshold values. For instance, here is one found in thesapphirerapids json file: { "BriefDescription": "Percentage of cycles spent in System Management Interrupts.", "MetricExpr": "((msr@aperf@ - cycles) / msr@aperf@ if msr@smi@ > 0 else 0)", "MetricGroup": "smi", "MetricName": "smi_cycles", "MetricThreshold": "smi_cycles > 0.1", "ScaleUnit": "100%" }, - Test parsing metric thresholds with the fake PMU in 'perf test pmu-events'. - Support for printing metric thresholds in 'perf list'. - Add --metric-no-threshold option to 'perf stat'. - Add rand (reverse and) and has_pmem (optane memory) support to metrics. - Sort list of input files to avoid depending on the order from readdir() helping in obtaining reproducible builds. S/390: - Add common metrics: - CPI (cycles per instruction), prbstate (ratio of instructions executed in problem state compared to total number of instructions), l1mp (Level one instruction and data cache misses per 100 instructions). - Add cache metrics for z13, z14, z15 and z16. - Add metric for TLB and cache. ARM: - Add raw decoding for SPE (Statistical Profiling Extension) v1.3 MTE (Memory Tagging Extension) and MOPS (Memory Operations) load/store. Intel PT hardware tracing: - Add event type names UINTR (User interrupt delivered) and UIRET (Exiting from user interrupt routine), documented in table 32-50 "CFE Packet Type and Vector Fields Details" in the Intel Processor Trace chapter of The Intel SDM Volume 3 version 078. - Add support for new branch instructions ERETS and ERETU. - Fix CYC timestamps after standalone CBR ARM CoreSight hardware tracing: - Allow user to override timestamp and contextid settings. - Fix segfault in dso lookup. - Fix timeless decode mode detection. - Add separate decode paths for timeless and per-thread modes. auxtrace: - Fix address filter entire kernel size. Miscellaneous: - Fix use-after-free and unaligned bugs in the PLT handling routines. - Use zfree() to reduce chances of use after free. - Add missing 0x prefix for addresses printed in hexadecimal in 'perf probe'. - Suppress massive unsupported target platform errors in the unwind code. - Fix return incorrect build_id size in elf_read_build_id(). - Fix 'perf scripts intel-pt-events.py' IPC output for Python 2 . - Add missing new parameter in kfree_skb tracepoint to the python scripts using it. - Add 'perf bench syscall fork' benchmark. - Add support for printing PERF_MEM_LVLNUM_UNC (Uncached access) in 'perf mem'. - Fix wrong size expectation for perf test 'Setup struct perf_event_attr' caused by the patch adding perf_event_attr::config3. - Fix some spelling mistakes" * tag 'perf-tools-for-v6.4-3-2023-05-06' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux: (365 commits) Revert "perf build: Make BUILD_BPF_SKEL default, rename to NO_BPF_SKEL" Revert "perf build: Warn for BPF skeletons if endian mismatches" perf metrics: Fix SEGV with --for-each-cgroup perf bpf skels: Stop using vmlinux.h generated from BTF, use subset of used structs + CO-RE perf stat: Separate bperf from bpf_profiler perf test record+probe_libc_inet_pton: Fix call chain match on x86_64 perf test record+probe_libc_inet_pton: Fix call chain match on s390 perf tracepoint: Fix memory leak in is_valid_tracepoint() perf cs-etm: Add fix for coresight trace for any range of CPUs perf build: Fix unescaped # in perf build-test perf unwind: Suppress massive unsupported target platform errors perf script: Add new parameter in kfree_skb tracepoint to the python scripts using it perf script: Print raw ip instead of binary offset for callchain perf symbols: Fix return incorrect build_id size in elf_read_build_id() perf list: Modify the warning message about scandirat(3) perf list: Fix memory leaks in print_tracepoint_events() perf lock contention: Rework offset calculation with BPF CO-RE perf lock contention: Fix struct rq lock access perf stat: Disable TopdownL1 on hybrid perf stat: Avoid SEGV on counter->name ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull debugobjects fix from Thomas Gleixner: "A single fix for debugobjects: The recent fix to ensure atomicity of lookup and allocation inadvertently broke the pool refill mechanism, so that debugobject OOMs now in certain situations. The reason is that the functions which got updated no longer invoke debug_objecs_init(), which is now the only place to care about refilling the tracking object pool. Restore the original behaviour by adding explicit refill opportunities to those places" * tag 'core-debugobjects-2023-05-06' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: debugobject: Ensure pool refill (again)
-
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6Linus Torvalds authored
Pull crypto fixes from Herbert Xu: - A long-standing bug in crypto_engine - A buggy but harmless check in the sun8i-ss driver - A regression in the CRYPTO_USER interface * tag 'v6.4-p2' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: crypto: api - Fix CRYPTO_USER checks for report function crypto: engine - fix crypto_queue backlog handling crypto: sun8i-ss - Fix a test in sun8i_ss_setup_ivs()
-
git://git.samba.org/sfrench/cifs-2.6Linus Torvalds authored
Pull cifs fixes from Steve French: "smb3 client fixes, mostly DFS or reconnect related: - Two DFS connection sharing fixes - DFS refresh fix - Reconnect fix - Two potential use after free fixes - Also print prefix patch in mount debug msg - Two small cleanup fixes" * tag '6.4-rc-smb3-client-fixes-part2' of git://git.samba.org/sfrench/cifs-2.6: cifs: Remove unneeded semicolon cifs: fix sharing of DFS connections cifs: avoid potential races when handling multiple dfs tcons cifs: protect access of TCP_Server_Info::{origin,leaf}_fullpath cifs: fix potential race when tree connecting ipc cifs: fix potential use-after-free bugs in TCP_Server_Info::hostname cifs: print smb3_fs_context::source when mounting cifs: protect session status check in smb2_reconnect() SMB3.1.1: correct definition for app_instance_id create contexts
-
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linuxLinus Torvalds authored
Pull clk fixes from Stephen Boyd: "A couple more patches that would be good to get into -rc1: - Revert an i.MX patch that's causing video failures because division math goes sideways - Fix a clang + W=1 build isue where FIELD_PREP() is taking a 32-bit variable instead of the usual u64 type - Fix a Kconfig bug in the StarFive JH7110 clk config that selects a reset controller when it can't be selected" * tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: clk: starfive: Fix RESET_STARFIVE_JH7110 can't be selected in a specified case clk: sp7021: Adjust width of _m in HWM_FIELD_PREP() Revert "clk: imx: composite-8m: Add support to determine_rate"
-
git://git.linaro.org/landing-teams/working/fujitsu/integrationLinus Torvalds authored
Pull mailbox updates from Jassi Brar: - mailbox api: allow direct registration to a channel and convert omap and pcc to use mbox_bind_client - omap and hi6220 : use of_property_read_bool - test: fix double-free and use spinlock header - rockchip and bcm-pdc: drop of_match_ptr - mpfs: change config symbol - mediatek gce: support MT6795 - qcom apcs: consolidate of_device_id and support IPQ9574 * tag 'mailbox-v6.4' of git://git.linaro.org/landing-teams/working/fujitsu/integration: dt-bindings: mailbox: qcom: add compatible for IPQ9574 SoC mailbox: qcom-apcs-ipc: do not grow the of_device_id dt-bindings: mailbox: qcom,apcs-kpss-global: use fallbacks for few variants dt-bindings: mailbox: mediatek,gce-mailbox: Add support for MT6795 mailbox: mpfs: convert SOC_MICROCHIP_POLARFIRE to ARCH_MICROCHIP_POLARFIRE mailbox: bcm-pdc: drop of_match_ptr for ID table mailbox: rockchip: drop of_match_ptr for ID table mailbox: mailbox-test: Fix potential double-free in mbox_test_message_write() mailbox: mailbox-test: Explicitly include header for spinlock support mailbox: Use of_property_read_bool() for boolean properties mailbox: pcc: Use mbox_bind_client mailbox: omap: Use mbox_bind_client mailbox: Allow direct registration to a channel
-
git://git.kernel.dk/linuxLinus Torvalds authored
Pull more io_uring updates from Jens Axboe: "Nothing major in here, just two different parts: - A small series from Breno that enables passing the full SQE down for ->uring_cmd(). This is a prerequisite for enabling full network socket operations. Queued up a bit late because of some stylistic concerns that got resolved, would be nice to have this in 6.4-rc1 so the dependent work will be easier to handle for 6.5. - Fix for the huge page coalescing, which was a regression introduced in the 6.3 kernel release (Tobias)" * tag 'for-6.4/io_uring-2023-05-07' of git://git.kernel.dk/linux: io_uring: Remove unnecessary BUILD_BUG_ON io_uring: Pass whole sqe to commands io_uring: Create a helper to return the SQE size io_uring/rsrc: check for nonconsecutive pages
-
- May 07, 2023
-
-
Arnaldo Carvalho de Melo authored
This reverts commit a980755b . We need to better polish building with BPF skels, so revert back to making it an experimental feature that has to be explicitely enabled using BUILD_BPF_SKEL=1. Signed-off-by:
Arnaldo Carvalho de Melo <acme@redhat.com>
-
Arnaldo Carvalho de Melo authored
This reverts commit 51924ae6 . We need to better polish building with BPF skels, so revert back to making it an experimental feature that has to be explicitely enabled using BUILD_BPF_SKEL=1. Signed-off-by:
Arnaldo Carvalho de Melo <acme@redhat.com>
-
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mmLinus Torvalds authored
Pull dmapool updates - again - from Andrew Morton: "Reinstate the dmapool changes which were accidentally removed by a mishap on the last commit in the previous attempt at the series" Fixes: 2d55c16c ("dmapool: create/destroy cleanup"). [ The whole old series: def85743..2d55c16c results in an empty diff because that last commit ended up being just a revert of all that came everything before it. - Linus ] * tag 'mm-stable-2023-05-06-10-49' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: dmapool: link blocks across pages dmapool: don't memset on free twice dmapool: simplify freeing dmapool: consolidate page initialization dmapool: rearrange page alloc failure handling dmapool: move debug code to own functions dmapool: speedup DMAPOOL_DEBUG with init_on_alloc dmapool: cleanup integer types dmapool: use sysfs_emit() instead of scnprintf() dmapool: remove checks for dev == NULL
-
Linus Torvalds authored
Merge tag 'mm-hotfixes-stable-2023-05-06-10-45' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm Pull hotfixes from Andrew Morton: "Five hotfixes. Three are cc:stable, two pertain to merge window changes" * tag 'mm-hotfixes-stable-2023-05-06-10-45' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: afs: fix the afs_dir_get_folio return value nilfs2: do not write dirty data after degenerating to read-only mm: do not reclaim private data from pinned page nilfs2: fix infinite loop in nilfs_mdt_get_block() mm/mmap/vma_merge: always check invariants
-
Keith Busch authored
The allocated dmapool pages are never freed for the lifetime of the pool. There is no need for the two level list+stack lookup for finding a free block since nothing is ever removed from the list. Just use a simple stack, reducing time complexity to constant. The implementation inserts the stack linking elements and the dma handle of the block within itself when freed. This means the smallest possible dmapool block is increased to at most 16 bytes to accommodate these fields, but there are no exisiting users requesting a dma pool smaller than that anyway. Removing the list has a significant change in performance. Using the kernel's micro-benchmarking self test: Before: # modprobe dmapool_test dmapool test: size:16 blocks:8192 time:57282 dmapool test: size:64 blocks:8192 time:172562 dmapool test: size:256 blocks:8192 time:789247 dmapool test: size:1024 blocks:2048 time:371823 dmapool test: size:4096 blocks:1024 time:362237 After: # modprobe dmapool_test dmapool test: size:16 blocks:8192 time:24997 dmapool test: size:64 blocks:8192 time:26584 dmapool test: size:256 blocks:8192 time:33542 dmapool test: size:1024 blocks:2048 time:9022 dmapool test: size:4096 blocks:1024 time:6045 The module test allocates quite a few blocks that may not accurately represent how these pools are used in real life. For a more marco level benchmark, running fio high-depth + high-batched on nvme, this patch shows submission and completion latency reduced by ~100usec each, 1% IOPs improvement, and perf record's time spent in dma_pool_alloc/free were reduced by half. [kbusch@kernel.org: push new blocks in ascending order] Link: https://lkml.kernel.org/r/20230221165400.1595247-1-kbusch@meta.com Link: https://lkml.kernel.org/r/20230126215125.4069751-12-kbusch@meta.com Fixes: 2d55c16c ("dmapool: create/destroy cleanup") Signed-off-by:
Keith Busch <kbusch@kernel.org> Reviewed-by:
Christoph Hellwig <hch@lst.de> Tested-by:
Bryan O'Donoghue <bryan.odonoghue@linaro.org> Cc: Matthew Wilcox <willy@infradead.org> Cc: Tony Battersby <tonyb@cybernetics.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org>
-
Keith Busch authored
If debug is enabled, dmapool will poison the range, so no need to clear it to 0 immediately before writing over it. Link: https://lkml.kernel.org/r/20230126215125.4069751-11-kbusch@meta.com Fixes: 2d55c16c ("dmapool: create/destroy cleanup") Signed-off-by:
Keith Busch <kbusch@kernel.org> Reviewed-by:
Christoph Hellwig <hch@lst.de> Cc: Matthew Wilcox <willy@infradead.org> Cc: Tony Battersby <tonyb@cybernetics.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org>
-
Keith Busch authored
The actions for busy and not busy are mostly the same, so combine these and remove the unnecessary function. Also, the pool is about to be freed so there's no need to poison the page data since we only check for poison on alloc, which can't be done on a freed pool. Link: https://lkml.kernel.org/r/20230126215125.4069751-10-kbusch@meta.com Fixes: 2d55c16c ("dmapool: create/destroy cleanup") Signed-off-by:
Keith Busch <kbusch@kernel.org> Reviewed-by:
Christoph Hellwig <hch@lst.de> Cc: Matthew Wilcox <willy@infradead.org> Cc: Tony Battersby <tonyb@cybernetics.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org>
-
Keith Busch authored
Various fields of the dma pool are set in different places. Move it all to one function. Link: https://lkml.kernel.org/r/20230126215125.4069751-9-kbusch@meta.com Fixes: 2d55c16c ("dmapool: create/destroy cleanup") Signed-off-by:
Keith Busch <kbusch@kernel.org> Reviewed-by:
Christoph Hellwig <hch@lst.de> Cc: Matthew Wilcox <willy@infradead.org> Cc: Tony Battersby <tonyb@cybernetics.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org>
-
Keith Busch authored
Handle the error in a condition so the good path can be in the normal flow. Link: https://lkml.kernel.org/r/20230126215125.4069751-8-kbusch@meta.com Fixes: 2d55c16c ("dmapool: create/destroy cleanup") Signed-off-by:
Keith Busch <kbusch@kernel.org> Reviewed-by:
Christoph Hellwig <hch@lst.de> Cc: Matthew Wilcox <willy@infradead.org> Cc: Tony Battersby <tonyb@cybernetics.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org>
-
Keith Busch authored
Clean up the normal path by moving the debug code outside it. Link: https://lkml.kernel.org/r/20230126215125.4069751-7-kbusch@meta.com Fixes: 2d55c16c ("dmapool: create/destroy cleanup") Signed-off-by:
Keith Busch <kbusch@kernel.org> Reviewed-by:
Christoph Hellwig <hch@lst.de> Cc: Matthew Wilcox <willy@infradead.org> Cc: Tony Battersby <tonyb@cybernetics.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org>
-
Tony Battersby authored
Avoid double-memset of the same allocated memory in dma_pool_alloc() when both DMAPOOL_DEBUG is enabled and init_on_alloc=1. Link: https://lkml.kernel.org/r/20230126215125.4069751-6-kbusch@meta.com Fixes: 2d55c16c ("dmapool: create/destroy cleanup") Signed-off-by:
Tony Battersby <tonyb@cybernetics.com> Signed-off-by:
Keith Busch <kbusch@kernel.org> Reviewed-by:
Christoph Hellwig <hch@lst.de> Cc: Matthew Wilcox <willy@infradead.org> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org>
-
Tony Battersby authored
To represent the size of a single allocation, dmapool currently uses 'unsigned int' in some places and 'size_t' in other places. Standardize on 'unsigned int' to reduce overhead, but use 'size_t' when counting all the blocks in the entire pool. Link: https://lkml.kernel.org/r/20230126215125.4069751-5-kbusch@meta.com Fixes: 2d55c16c ("dmapool: create/destroy cleanup") Signed-off-by:
Tony Battersby <tonyb@cybernetics.com> Signed-off-by:
Keith Busch <kbusch@kernel.org> Reviewed-by:
Christoph Hellwig <hch@lst.de> Cc: Matthew Wilcox <willy@infradead.org> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org>
-
Tony Battersby authored
Use sysfs_emit instead of scnprintf, snprintf or sprintf. Link: https://lkml.kernel.org/r/20230126215125.4069751-4-kbusch@meta.com Fixes: 2d55c16c ("dmapool: create/destroy cleanup") Signed-off-by:
Tony Battersby <tonyb@cybernetics.com> Signed-off-by:
Keith Busch <kbusch@kernel.org> Reviewed-by:
Christoph Hellwig <hch@lst.de> Cc: Matthew Wilcox <willy@infradead.org> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org>
-
Tony Battersby authored
dmapool originally tried to support pools without a device because dma_alloc_coherent() supports allocations without a device. But nobody ended up using dma pools without a device, and trying to do so will result in an oops. So remove the checks for pool->dev == NULL since they are unneeded bloat. [kbusch@kernel.org: add check for null dev on create] Link: https://lkml.kernel.org/r/20230126215125.4069751-3-kbusch@meta.com Fixes: 2d55c16c ("dmapool: create/destroy cleanup") Signed-off-by:
Tony Battersby <tonyb@cybernetics.com> Signed-off-by:
Keith Busch <kbusch@kernel.org> Reviewed-by:
Christoph Hellwig <hch@lst.de> Cc: Matthew Wilcox <willy@infradead.org> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org>
-
Linus Torvalds authored
Fix another case of an incorrect check for the returned 'folio' value from __filemap_get_folio(). The failure case used to return NULL, but was changed by commit 66dabbb6 ("mm: return an ERR_PTR from __filemap_get_folio"). But in the meantime, commit ec108d3c ("NFS: Convert readdir page array functions to use a folio") added a new user of that function. And my merge of the two did not fix this up correctly. The ext4 merge had the same issue, but that one had been caught in linux-next and got properly fixed while merging. Fixes: 0127f25b ("Merge tag 'nfs-for-6.4-1' of git://git.linux-nfs.org/projects/anna/linux-nfs") Cc: Anna Schumaker <anna@kernel.org> Cc: Matthew Wilcox <willy@infradead.org> Cc: Christoph Hellwig <hch@lst.de> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Christoph Hellwig authored
Keep returning NULL on failure instead of letting an ERR_PTR escape to callers that don't expect it. Link: https://lkml.kernel.org/r/20230503154526.1223095-2-hch@lst.de Fixes: 66dabbb6 ("mm: return an ERR_PTR from __filemap_get_folio") Signed-off-by:
Christoph Hellwig <hch@lst.de> Reported-by:
Jan Kara <jack@suse.cz> Reviewed-by:
Jan Kara <jack@suse.cz> Reviewed-by:
David Howells <dhowells@redhat.com> Tested-by:
David Howells <dhowells@redhat.com> Cc: Marc Dionne <marc.dionne@auristor.com> Cc: Matthew Wilcox <willy@infradead.org> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org>
-
Ryusuke Konishi authored
According to syzbot's report, mark_buffer_dirty() called from nilfs_segctor_do_construct() outputs a warning with some patterns after nilfs2 detects metadata corruption and degrades to read-only mode. After such read-only degeneration, page cache data may be cleared through nilfs_clear_dirty_page() which may also clear the uptodate flag for their buffer heads. However, even after the degeneration, log writes are still performed by unmount processing etc., which causes mark_buffer_dirty() to be called for buffer heads without the "uptodate" flag and causes the warning. Since any writes should not be done to a read-only file system in the first place, this fixes the warning in mark_buffer_dirty() by letting nilfs_segctor_do_construct() abort early if in read-only mode. This also changes the retry check of nilfs_segctor_write_out() to avoid unnecessary log write retries if it detects -EROFS that nilfs_segctor_do_construct() returned. Link: https://lkml.kernel.org/r/20230427011526.13457-1-konishi.ryusuke@gmail.com Signed-off-by:
Ryusuke Konishi <konishi.ryusuke@gmail.com> Tested-by:
Ryusuke Konishi <konishi.ryusuke@gmail.com> Reported-by:
<syzbot+2af3bc9585be7f23f290@syzkaller.appspotmail.com> Link: https://syzkaller.appspot.com/bug?extid=2af3bc9585be7f23f290 Cc: <stable@vger.kernel.org> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org>
-
Jan Kara authored
If the page is pinned, there's no point in trying to reclaim it. Furthermore if the page is from the page cache we don't want to reclaim fs-private data from the page because the pinning process may be writing to the page at any time and reclaiming fs private info on a dirty page can upset the filesystem (see link below). Link: https://lore.kernel.org/linux-mm/20180103100430.GE4911@quack2.suse.cz Link: https://lkml.kernel.org/r/20230428124140.30166-1-jack@suse.cz Signed-off-by:
Jan Kara <jack@suse.cz> Reviewed-by:
Matthew Wilcox (Oracle) <willy@infradead.org> Reviewed-by:
Lorenzo Stoakes <lstoakes@gmail.com> Reviewed-by:
Christoph Hellwig <hch@lst.de> Reviewed-by:
John Hubbard <jhubbard@nvidia.com> Acked-by:
David Hildenbrand <david@redhat.com> Acked-by:
Peter Xu <peterx@redhat.com> Cc: <stable@vger.kernel.org> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org>
-
Ryusuke Konishi authored
If the disk image that nilfs2 mounts is corrupted and a virtual block address obtained by block lookup for a metadata file is invalid, nilfs_bmap_lookup_at_level() may return the same internal return code as -ENOENT, meaning the block does not exist in the metadata file. This duplication of return codes confuses nilfs_mdt_get_block(), causing it to read and create a metadata block indefinitely. In particular, if this happens to the inode metadata file, ifile, semaphore i_rwsem can be left held, causing task hangs in lock_mount. Fix this issue by making nilfs_bmap_lookup_at_level() treat virtual block address translation failures with -ENOENT as metadata corruption instead of returning the error code. Link: https://lkml.kernel.org/r/20230430193046.6769-1-konishi.ryusuke@gmail.com Signed-off-by:
Ryusuke Konishi <konishi.ryusuke@gmail.com> Tested-by:
Ryusuke Konishi <konishi.ryusuke@gmail.com> Reported-by:
<syzbot+221d75710bde87fa0e97@syzkaller.appspotmail.com> Link: https://syzkaller.appspot.com/bug?extid=221d75710bde87fa0e97 Cc: <stable@vger.kernel.org> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org>
-
Lorenzo Stoakes authored
We may still have inconsistent input parameters even if we choose not to merge and the vma_merge() invariant checks are useful for checking this with no production runtime cost (these are only relevant when CONFIG_DEBUG_VM is specified). Therefore, perform these checks regardless of whether we merge. This is relevant, as a recent issue (addressed in commit "mm/mempolicy: Correctly update prev when policy is equal on mbind") in the mbind logic was only picked up in the 6.2.y stable branch where these assertions are performed prior to determining mergeability. Had this remained the same in mainline this issue may have been picked up faster, so moving forward let's always check them. Link: https://lkml.kernel.org/r/df548a6ae3fa135eec3b446eb3dae8eb4227da97.1682885809.git.lstoakes@gmail.com Signed-off-by:
Lorenzo Stoakes <lstoakes@gmail.com> Acked-by:
Vlastimil Babka <vbabka@suse.cz> Reviewed-by:
David Hildenbrand <david@redhat.com> Reviewed-by:
Liam R. Howlett <Liam.Howlett@oracle.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org>
-
Matthew Wilcox authored
Smatch reports that filemap_fault() was missed in the conversion of __filemap_get_folio() error returns from NULL to ERR_PTR. Fixes: 66dabbb6 ("mm: return an ERR_PTR from __filemap_get_folio") Reported-by:
Dan Carpenter <dan.carpenter@linaro.org> Reported-by:
<syzbot+48011b86c8ea329af1b9@syzkaller.appspotmail.com> Reported-by:
Christoph Hellwig <hch@lst.de> Signed-off-by:
Matthew Wilcox (Oracle) <willy@infradead.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
- May 06, 2023
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds authored
Pull more SCSI updates from James Bottomley: "Six late arriving patches for the merge window. Five are minor assorted fixes and updates. The IPR driver change removes SATA support, which will now allow a major cleanup in the ATA subsystem because it was the only driver still using the old attachment mechanism. The driver is only used on power systems and SATA was used to support a DVD device, which has long been moved to a different hba. IBM chose this route instead of porting ipr to the newer SATA interfaces" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: scsi: qedi: Fix use after free bug in qedi_remove() scsi: ufs: core: mcq: Fix &hwq->cq_lock deadlock issue scsi: ipr: Remove several unused variables scsi: pm80xx: Log device registration scsi: ipr: Remove SATA support scsi: scsi_debug: Abort commands from scsi_debug_device_reset()
-
git://git.kernel.dk/linuxLinus Torvalds authored
Pull more block updates from Jens Axboe: - MD pull request via Song: - Improve raid5 sequential IO performance on spinning disks, which fixes a regression since v6.0 (Jan Kara) - Fix bitmap offset types, which fixes an issue introduced in this merge window (Jonathan Derrick) - Cleanup of hweight type used for cgroup writeback (Maxim) - Fix a regression with the "has_submit_bio" changes across partitions (Ming) - Cleanup of QUEUE_FLAG_ADD_RANDOM clearing. We used to set this flag on queues non blk-mq queues, and hence some drivers clear it unconditionally. Since all of these have since been converted to true blk-mq drivers, drop the useless clear as the bit is not set (Chaitanya) - Fix the flags being set in a bio for a flush for drbd (Christoph) - Cleanup and deduplication of the code handling setting block device capacity (Damien) - Fix for ublk handling IO timeouts (Ming) - Fix for a regression in blk-cgroup teardown (Tao) - NBD documentation and code fixes (Eric) - Convert blk-integrity to using device_attributes rather than a second kobject to manage lifetimes (Thomas) * tag 'for-6.4/block-2023-05-06' of git://git.kernel.dk/linux: ublk: add timeout handler drbd: correctly submit flush bio on barrier mailmap: add mailmap entries for Jens Axboe block: Skip destroyed blkg when restart in blkg_destroy_all() writeback: fix call of incorrect macro md: Fix bitmap offset type in sb writer md/raid5: Improve performance for sequential IO docs nbd: userspace NBD now favors github over sourceforge block nbd: use req.cookie instead of req.handle uapi nbd: add cookie alias to handle uapi nbd: improve doc links to userspace spec blk-integrity: register sysfs attributes on struct device blk-integrity: convert to struct device_attribute blk-integrity: use sysfs_emit block/drivers: remove dead clear of random flag block: sync part's ->bd_has_submit_bio with disk's block: Cleanup set_capacity()/bdev_set_nr_sectors()
-
git://git.kernel.dk/linuxLinus Torvalds authored
Pull nonblocking pipe io_uring support from Jens Axboe: "Here's the revised edition of the FMODE_NOWAIT support for pipes, in which we just flag it as such supporting FMODE_NOWAIT unconditionally, but clear it if we ever end up using splice/vmsplice on the pipe. The pipe read/write side is perfectly fine for nonblocking IO, however splice and vmsplice can potentially wait for IO with the pipe lock held" * tag 'pipe-nonblock-2023-05-06' of git://git.kernel.dk/linux: pipe: set FMODE_NOWAIT on pipes splice: clear FMODE_NOWAIT on file if splice/vmsplice is used
-
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/soundLinus Torvalds authored
Pull sound fixes from Takashi Iwai: "A collection of small fixes for rc1. The only (LOC-wise) dominant change was ASoC Qualcomm fix, but most of it was merely a code shuffling. Another significant change here is for ALSA PCM core; it received a revert and a series of fixes for PCM auto-silencing where it caused a regression in the previous PR for rc1. Others are all small: ASoC Intel fixes, various quirks for ASoC AMD, HD-audio and USB-audio, the continued legacy emu10k1 code cleanup, and some documentation updates" * tag 'sound-fix-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (23 commits) ALSA: pcm: use exit controlled loop in snd_pcm_playback_silence() ALSA: pcm: simplify top-up mode init in snd_pcm_playback_silence() ALSA: pcm: playback silence - move silence variable updates to separate function ALSA: pcm: playback silence - remove extra code ALSA: pcm: fix playback silence - correct incremental silencing ALSA: pcm: fix playback silence - use the actual new_hw_ptr for the threshold mode ALSA: pcm: Revert "ALSA: pcm: rewrite snd_pcm_playback_silence()" ALSA: hda/realtek: Fix mute and micmute LEDs for an HP laptop ALSA: caiaq: input: Add error handling for unsupported input methods in `snd_usb_caiaq_input_init` ALSA: usb-audio: Add quirk for Pioneer DDJ-800 ALSA: hda/realtek: support HP Pavilion Aero 13-be0xxx Mute LED ASoC: Intel: soc-acpi-cht: Add quirk for Nextbook Ares 8A tablet ASoC: amd: yc: Add Asus VivoBook Pro 14 OLED M6400RC to the quirks list for acp6x ASoC: codecs: wcd938x: fix accessing regmap on unattached devices ALSA: docs: Fix code block indentation in ALSA driver example ALSA: docs: Extend module parameters description ALSA: hda/realtek: Add quirk for ASUS UM3402YAR using CS35L41 ALSA: emu10k1: use more existing defines instead of open-coded numbers ASoC: amd: yc: Add ASUS M3402RA into DMI table ALSA: hda/realtek: Add quirk for ThinkPad P1 Gen 6 ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulatorLinus Torvalds authored
Pull regulator fix from Mark Brown: "A trivial typo fix that came in during the merge window" * tag 'regulator-fix-v6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: regulator: consumer.rst: fix 'regulator_enable' typo.
-
git://git.samba.org/ksmbdLinus Torvalds authored
Pull ksmbd server fixes from Steve French: "Ten ksmbd server fixes, including some important security fixes: - Two use after free fixes - Fix RCU callback race - Deadlock fix - Three patches to prevent session setup attacks - Prevent guest users from establishing multichannel sessions - Fix null pointer dereference in query FS info - Memleak fix" * tag '6.4-rc-ksmbd-server-fixes-part2' of git://git.samba.org/ksmbd: ksmbd: call rcu_barrier() in ksmbd_server_exit() ksmbd: fix racy issue under cocurrent smb2 tree disconnect ksmbd: fix racy issue from smb2 close and logoff with multichannel ksmbd: not allow guest user on multichannel ksmbd: fix deadlock in ksmbd_find_crypto_ctx() ksmbd: block asynchronous requests when making a delay on session setup ksmbd: destroy expired sessions ksmbd: fix racy issue from session setup and logoff ksmbd: fix NULL pointer dereference in smb2_get_info_filesystem() ksmbd: fix memleak in session setup
-
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netLinus Torvalds authored
Pull networking fixes from Jakub Kicinski: "Including fixes from netfilter. Current release - regressions: - sched: act_pedit: free pedit keys on bail from offset check Current release - new code bugs: - pds_core: - Kconfig fixes (DEBUGFS and AUXILIARY_BUS) - fix mutex double unlock in error path Previous releases - regressions: - sched: cls_api: remove block_cb from driver_list before freeing - nf_tables: fix ct untracked match breakage - eth: mtk_eth_soc: drop generic vlan rx offload - sched: flower: fix error handler on replace Previous releases - always broken: - tcp: fix skb_copy_ubufs() vs BIG TCP - ipv6: fix skb hash for some RST packets - af_packet: don't send zero-byte data in packet_sendmsg_spkt() - rxrpc: timeout handling fixes after moving client call connection to the I/O thread - ixgbe: fix panic during XDP_TX with > 64 CPUs - igc: RMW the SRRCTL register to prevent losing timestamp config - dsa: mt7530: fix corrupt frames using TRGMII on 40 MHz XTAL MT7621 - r8152: - fix flow control issue of RTL8156A - fix the poor throughput for 2.5G devices - move setting r8153b_rx_agg_chg_indicate() to fix coalescing - enable autosuspend - ncsi: clear Tx enable mode when handling a Config required AEN - octeontx2-pf: macsec: fixes for CN10KB ASIC rev Misc: - 9p: remove INET dependency" * tag 'net-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (69 commits) net: bcmgenet: Remove phy_stop() from bcmgenet_netif_stop() pds_core: fix mutex double unlock in error path net/sched: flower: fix error handler on replace Revert "net/sched: flower: Fix wrong handle assignment during filter change" net/sched: flower: fix filter idr initialization net: fec: correct the counting of XDP sent frames bonding: add xdp_features support net: enetc: check the index of the SFI rather than the handle sfc: Add back mailing list virtio_net: suppress cpu stall when free_unused_bufs ice: block LAN in case of VF to VF offload net: dsa: mt7530: fix network connectivity with multiple CPU ports net: dsa: mt7530: fix corrupt frames using trgmii on 40 MHz XTAL MT7621 9p: Remove INET dependency netfilter: nf_tables: fix ct untracked match breakage af_packet: Don't send zero-byte data in packet_sendmsg_spkt(). igc: read before write to SRRCTL register pds_core: add AUXILIARY_BUS and NET_DEVLINK to Kconfig pds_core: remove CONFIG_DEBUG_FS from makefile ionic: catch failure from devlink_alloc ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linuxLinus Torvalds authored
Pull more i2c updates from Wolfram Sang: "Some more driver bugfixes and a DT binding conversion" * tag 'i2c-for-6.4-rc1-part2' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: dt-bindings: i2c: brcm,kona-i2c: convert to YAML i2c: gxp: fix build failure without CONFIG_I2C_SLAVE i2c: imx-lpi2c: avoid taking clk_prepare mutex in PM callbacks i2c: omap: Fix standard mode false ACK readings i2c: tegra: Fix PEC support for SMBUS block read
-
Lukas Bulwahn authored
Commit 0da6e5fd ("gcc: disable '-Warray-bounds' for gcc-13 too") makes config GCC11_NO_ARRAY_BOUNDS to be for disabling -Warray-bounds in any gcc version 11 and upwards, and with that, removes the GCC12_NO_ARRAY_BOUNDS config as it is now covered by the semantics of GCC11_NO_ARRAY_BOUNDS. As GCC11_NO_ARRAY_BOUNDS is yes by default, there is no need for the s390 architecture to explicitly select GCC11_NO_ARRAY_BOUNDS. Hence, the select GCC12_NO_ARRAY_BOUNDS in arch/s390/Kconfig can simply be dropped. Remove the unneeded "select GCC12_NO_ARRAY_BOUNDS". Signed-off-by:
Lukas Bulwahn <lukas.bulwahn@gmail.com> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Ian Rogers authored
Ensure the metric threshold is copied correctly or else a use of uninitialized memory happens. Fixes: d0a3052f ("perf metric: Compute and print threshold values") Reported-by:
Namhyung Kim <namhyung@kernel.org> Signed-off-by:
Ian Rogers <irogers@google.com> Tested-by:
Namhyung Kim <namhyung@kernel.org> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Kajol Jain <kjain@linux.ibm.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: https://lore.kernel.org/r/20230505204119.3443491-1-irogers@google.com Signed-off-by:
Arnaldo Carvalho de Melo <acme@redhat.com>
-
Arnaldo Carvalho de Melo authored
Linus reported a build break due to using a vmlinux without a BTF elf section to generate the vmlinux.h header with bpftool for use in the BPF tools in tools/perf/util/bpf_skel/*.bpf.c. Instead add a vmlinux.h file with the structs needed with the fields the tools need, marking the structs with __attribute__((preserve_access_index)), so that libbpf's CO-RE code can fixup the struct field offsets. In some cases the vmlinux.h file that was being generated by bpftool from the kernel BTF information was not needed at all, just including linux/bpf.h, sometimes linux/perf_event.h was enough as non-UAPI types were not being used. To keep te patch small, include those UAPI headers from the trimmed down vmlinux.h file, that then provides the tools with just the structs and the subset of its fields needed for them. Testing it: # perf lock contention -b find / > /dev/null ^C contended total wait max wait avg wait type caller 7 53.59 us 10.86 us 7.66 us rwlock:R start_this_handle+0xa0 2 30.35 us 21.99 us 15.17 us rwsem:R iterate_dir+0x52 1 9.04 us 9.04 us 9.04 us rwlock:W start_this_handle+0x291 1 8.73 us 8.73 us 8.73 us spinlock raw_spin_rq_lock_nested+0x1e # # perf lock contention -abl find / > /dev/null ^C contended total wait max wait avg wait address symbol 1 262.96 ms 262.96 ms 262.96 ms ffff8e67502d0170 (mutex) 12 244.24 us 39.91 us 20.35 us ffff8e6af56f8070 mmap_lock (rwsem) 7 30.28 us 6.85 us 4.33 us ffff8e6c865f1d40 rq_lock (spinlock) 3 7.42 us 4.03 us 2.47 us ffff8e6c864b1d40 rq_lock (spinlock) 2 3.72 us 2.19 us 1.86 us ffff8e6c86571d40 rq_lock (spinlock) 1 2.42 us 2.42 us 2.42 us ffff8e6c86471d40 rq_lock (spinlock) 4 2.11 us 559 ns 527 ns ffffffff9a146c80 rcu_state (spinlock) 3 1.45 us 818 ns 482 ns ffff8e674ae8384c (rwlock) 1 870 ns 870 ns 870 ns ffff8e68456ee060 (rwlock) 1 663 ns 663 ns 663 ns ffff8e6c864f1d40 rq_lock (spinlock) 1 573 ns 573 ns 573 ns ffff8e6c86531d40 rq_lock (spinlock) 1 472 ns 472 ns 472 ns ffff8e6c86431740 (spinlock) 1 397 ns 397 ns 397 ns ffff8e67413a4f04 (spinlock) # # perf test offcpu 95: perf record offcpu profiling tests : Ok # # perf kwork latency --use-bpf Starting trace, Hit <Ctrl+C> to stop and report ^C Kwork Name | Cpu | Avg delay | Count | Max delay | Max delay start | Max delay end | -------------------------------------------------------------------------------------------------------------------------------- (w)flush_memcg_stats_dwork | 0000 | 1056.212 ms | 2 | 2112.345 ms | 550113.229573 s | 550115.341919 s | (w)toggle_allocation_gate | 0000 | 10.144 ms | 62 | 416.389 ms | 550113.453518 s | 550113.869907 s | (w)0xffff8e6748e28080 | 0002 | 0.623 ms | 1 | 0.623 ms | 550110.989841 s | 550110.990464 s | (w)vmstat_shepherd | 0000 | 0.586 ms | 10 | 2.828 ms | 550111.971536 s | 550111.974364 s | (w)vmstat_update | 0007 | 0.363 ms | 5 | 1.634 ms | 550113.222520 s | 550113.224154 s | (w)vmstat_update | 0000 | 0.324 ms | 10 | 2.827 ms | 550111.971526 s | 550111.974354 s | (w)0xffff8e674c5f4a58 | 0002 | 0.102 ms | 5 | 0.134 ms | 550110.989839 s | 550110.989972 s | (w)psi_avgs_work | 0001 | 0.086 ms | 3 | 0.107 ms | 550114.957852 s | 550114.957959 s | (w)psi_avgs_work | 0000 | 0.079 ms | 5 | 0.100 ms | 550118.605668 s | 550118.605768 s | (w)kfree_rcu_monitor | 0006 | 0.079 ms | 1 | 0.079 ms | 550110.925821 s | 550110.925900 s | (w)psi_avgs_work | 0004 | 0.079 ms | 1 | 0.079 ms | 550109.581835 s | 550109.581914 s | (w)psi_avgs_work | 0001 | 0.078 ms | 1 | 0.078 ms | 550109.197809 s | 550109.197887 s | (w)psi_avgs_work | 0002 | 0.077 ms | 5 | 0.086 ms | 550110.669819 s | 550110.669905 s | <SNIP> # strace -e bpf -o perf-stat-bpf-counters.output perf stat -e cycles --bpf-counters sleep 1 Performance counter stats for 'sleep 1': 6,197,983 cycles 1.003922848 seconds time elapsed 0.000000000 seconds user 0.002032000 seconds sys # head -7 perf-stat-bpf-counters.output bpf(BPF_OBJ_GET, {pathname="/sys/fs/bpf/perf_attr_map", bpf_fd=0, file_flags=0}, 16) = 3 bpf(BPF_OBJ_GET_INFO_BY_FD, {info={bpf_fd=3, info_len=88, info=0x7ffcead64990}}, 16) = 0 bpf(BPF_MAP_LOOKUP_ELEM, {map_fd=3, key=0x24129e0, value=0x7ffcead65a48, flags=BPF_ANY}, 32) = 0 bpf(BPF_LINK_GET_FD_BY_ID, {link_id=1252}, 12) = -1 ENOENT (No such file or directory) bpf(BPF_PROG_LOAD, {prog_type=BPF_PROG_TYPE_SOCKET_FILTER, insn_cnt=2, insns=0x7ffcead65780, license="GPL", log_level=0, log_size=0, log_buf=NULL, kern_version=KERNEL_VERSION(0, 0, 0), prog_flags=0, prog_name="", prog_ifindex=0, expected_attach_type=BPF_CGROUP_INET_INGRESS, prog_btf_fd=0, func_info_rec_size=0, +func_info=NULL, func_info_cnt=0, line_info_rec_size=0, line_info=NULL, line_info_cnt=0, attach_btf_id=0, attach_prog_fd=0}, 116) = 4 bpf(BPF_PROG_LOAD, {prog_type=BPF_PROG_TYPE_SOCKET_FILTER, insn_cnt=2, insns=0x7ffcead65920, license="GPL", log_level=0, log_size=0, log_buf=NULL, kern_version=KERNEL_VERSION(0, 0, 0), prog_flags=0, prog_name="", prog_ifindex=0, expected_attach_type=BPF_CGROUP_INET_INGRESS, prog_btf_fd=0, func_info_rec_size=0, +func_info=NULL, func_info_cnt=0, line_info_rec_size=0, line_info=NULL, line_info_cnt=0, attach_btf_id=0, attach_prog_fd=0, fd_array=NULL}, 128) = 4 bpf(BPF_BTF_LOAD, {btf="\237\353\1\0\30\0\0\0\0\0\0\0\20\0\0\0\20\0\0\0\5\0\0\0\1\0\0\0\0\0\0\1"..., btf_log_buf=NULL, btf_size=45, btf_log_size=0, btf_log_level=0}, 28) = 4 # Reported-by:
Linus Torvalds <torvalds@linux-foundation.org> Suggested-by:
Andrii Nakryiko <andrii@kernel.org> Tested-by:
Namhyung Kim <namhyung@kernel.org> Tested-by:
Song Liu <song@kernel.org> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexei Starovoitov <ast@kernel.org> Cc: Ian Rogers <irogers@google.com> Cc: Jiri Olsa <jolsa@kernel.org> Co-developed-by:
Jiri Olsa <jolsa@kernel.org> Link: https://lore.kernel.org/lkml/ZFU1PJrn8YtHIqno@kernel.org Signed-off-by:
Arnaldo Carvalho de Melo <acme@redhat.com>
-