- Nov 01, 2019
-
-
Julian Wiedmann authored
For IQD devices with Multi-Write support, we can defer the queue-flush further and transmit multiple IO buffers with a single TX doorbell. The same-target restriction still applies. Signed-off-by:
Julian Wiedmann <jwi@linux.ibm.com> Reviewed-by:
Alexandra Winter <wintera@linux.ibm.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Julian Wiedmann authored
This allows IQD drivers to send out multiple SBALs with a single SIGA instruction. Signed-off-by:
Julian Wiedmann <jwi@linux.ibm.com> Reviewed-by:
Alexandra Winter <wintera@linux.ibm.com> Acked-by:
Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Madalin Bucur says: ==================== DPAA Ethernet changes v2: remove excess braces Here are some more changes for the DPAA 1.x area. In summary, these changes use pages for the receive buffers and for the scatter-gather table fed to the HW on the Tx path, perform a bit of cleanup in some convoluted parts of the code, add some minor fixes related to DMA (un)mapping sequencing for a not so common scenario, add a device link that removes the interfaces when the QMan portal in use by them is removed. ==================== Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Madalin Bucur authored
Before this change, unbinding the QMan portals did not trigger a corresponding unbinding of the dpaa_eth making use of it; the first QMan portal related operation issued afterwards crashed the kernel. The device link ensures the dpaa_eth dependency upon the qman portal used is honoured at the QMan portal removal. Signed-off-by:
Madalin Bucur <madalin.bucur@nxp.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Madalin Bucur authored
Introduce the API required to make sure that the devices that use the QMan portal are unbound when the portal is unbound. Signed-off-by:
Madalin Bucur <madalin.bucur@nxp.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Madalin Bucur authored
Make sure all the frames that are in flight have time to be processed before the interface is completely brought down. Add a missing delay for the Rx path. Signed-off-by:
Madalin Bucur <madalin.bucur@nxp.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Madalin Bucur authored
User reports that an application making an (incorrect) call to restart AN on a fixed link DPAA interface triggers an error in the kernel log while the returned EINVAL should be enough. Reported-by:
Joakim Tjernlund <Joakim.Tjernlund@infinera.com> Signed-off-by:
Madalin Bucur <madalin.bucur@nxp.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Madalin Bucur authored
Prior to this change, the frames dropped on receive or transmit were not displayed in the ethtool statistics, leaving the dropped frames unaccounted for. Signed-off-by:
Madalin Bucur <madalin.bucur@nxp.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Madalin Bucur authored
Use a page to store the scatter gather table on the transmit path. Signed-off-by:
Madalin Bucur <madalin.bucur@nxp.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Madalin Bucur authored
Remove cast, align variable name, simplify DMA map size computation. Signed-off-by:
Madalin Bucur <madalin.bucur@nxp.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Madalin Bucur authored
Instead of reading skb fields, use information from the DPAA frame descriptor. Signed-off-by:
Madalin Bucur <madalin.bucur@nxp.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Madalin Bucur authored
Avoid casts and repeated conversions. Signed-off-by:
Madalin Bucur <madalin.bucur@nxp.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Madalin Bucur authored
The dpaa_cleanup_tx_fd() function is called by the frame transmit confirmation callback but also on several error paths. This function is reading the transmit timestamp value. Avoid reading an invalid timestamp value on the error paths. Fixes: 4664856e ("dpaa_eth: add support for hardware timestamping") Signed-off-by:
Madalin Bucur <madalin.bucur@nxp.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Madalin Bucur authored
DMA unmapping is required before accessing the HW provided timestamping information. Fixes: 4664856e ("dpaa_eth: add support for hardware timestamping") Signed-off-by:
Madalin Bucur <madalin.bucur@nxp.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Madalin Bucur authored
Change the buffers used for reception from netdev_frags to pages. Signed-off-by:
Madalin Bucur <madalin.bucur@nxp.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Madalin Bucur authored
Currently the DPAA Ethernet driver is using three buffer pools for each interface, with three different sizes for the buffers provided for the FMan reception path. This patch reduces the number of buffer pools to one per interface. This change is in preparation of another, that will be switching from netdev_frags to page backed buffers for the receive path. Signed-off-by:
Madalin Bucur <madalin.bucur@nxp.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Huazhong Tan says: ==================== net: hns3: add some optimizations and cleanups This series adds some code optimizations and cleanups for the HNS3 ethernet driver. [patch 1/9] dumps some debug information when reset fail. [patch 2/9] dumps some struct netdev_queue information when TX timeout. [patch 3/9] cleanups some magic numbers. [patch 4/9] cleanups some coding style issue. [patch 5/9] fixes a compiler warning. [patch 6/9] optimizes some local variable initialization. [patch 7/9] modifies some comments. [patch 8/9] cleanups some print format warnings. [patch 9/9] cleanups byte order issue. ==================== Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Guojia Liao authored
Though the hip08 and the IMP(Intelligent Management Processor) have the same byte order right now, it is better to convert __be or __le variable into the CPU's byte order before print. Signed-off-by:
Guojia Liao <liaoguojia@huawei.com> Signed-off-by:
Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Guojia Liao authored
Using '%d' for printing type unsigned int or '%u' for type int would cause static tools to give false warnings, so this patch cleanups this warning by using the suitable format specifier of the type of variable. BTW, modifies the type of some variables and macro to synchronize with their usage. Signed-off-by:
Guojia Liao <liaoguojia@huawei.com> Signed-off-by:
Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Guangbin Huang authored
This patch makes the comment for macro HCLGE_MBX_GET_VF_FLR_STATUS more correct, and adds comments in some place to make the code more readable. Signed-off-by:
Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by:
Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Guangbin Huang authored
The variable tx_ring is unnecessary to be initialized as it will be set before used, and the variable rst_cnt is better to be initialized when declaration for simplification. Signed-off-by:
Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by:
Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Guojia Liao authored
In hns3_nic_init_irq(), when '*_int_idx' has more than 9 digits and the length of netdev's name is IFNAMSIZ, the total length of final name will be bigger the HNAE3_INT_NAME_LEN - 1, even though '*_int_idx' will never have such large value, but the compiler gives a format-truncation warning for this case. So this patch just enlarges the length to avoid this warning. Signed-off-by:
Guojia Liao <liaoguojia@huawei.com> Signed-off-by:
Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Guangbin Huang authored
To unify code style and make code simpler, this patch modifies some code, deletes unnecessary blank lines and {}, changes location of code, and so on. No functional change. Signed-off-by:
Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by:
Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Guojia Liao authored
To make the code more readable, this patch replaces some magic numbers with macro or sizeof operation. Also uses macro lower_32_bits and upper_32_bits to get bits 0-31 and 32-63 of a number, instead of using type conversion and '>>' operation. No functional change. Signed-off-by:
Guojia Liao <liaoguojia@huawei.com> Signed-off-by:
Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Yunsheng Lin authored
When there is a TX timeout, we can tell if the driver or stack has stopped the queue by looking at state field, and when has the last packet transmited by looking at trans_start field. So this patch prints these two field in the hns3_get_tx_timeo_queue_info(). Signed-off-by:
Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by:
Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Huazhong Tan authored
When reset fails, there is some information that will help for finding out why does reset fail. and removes an unused core_rst_cnt field in struct hclge_rst_stats. Signed-off-by:
Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Sheetal Tigadoli says: ==================== bnxt_en: Add OP-TEE based bnxt f/w manager This patch series adds support for TEE based BNXT firmware management module and the driver changes to invoke OP-TEE APIs to fastboot firmware and to collect crash dump. Changes from v4: - update Kconfig to reflect dependency on TEE driver ==================== Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Vasundhara Volam authored
Driver supports 2 types of core dumps. 1. Live dump - Firmware dump when system is up and running. 2. Crash dump - Dump which is collected during firmware crash that can be retrieved after recovery. Crash dump is currently supported only on specific 58800 chips which can be retrieved using OP-TEE API only, as firmware cannot access this region directly. User needs to set the dump flag using following command before initiating the dump collection: $ ethtool -W|--set-dump eth0 N Where N is "0" for live dump and "1" for crash dump Command to collect the dump after setting the flag: $ ethtool -w eth0 data Filename v3: Modify set_dump to support even when CONFIG_TEE_BNXT_FW=n. Also change log message to netdev_info(). Cc: Jakub Kicinski <jakub.kicinski@netronome.com> Cc: Michael Chan <michael.chan@broadcom.com> Signed-off-by:
Vasundhara Volam <vasundhara-v.volam@broadcom.com> Signed-off-by:
Sheetal Tigadoli <sheetal.tigadoli@broadcom.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Vasundhara Volam authored
In error recovery process when firmware indicates that it is completely down, initiate a firmware reset by calling OP-TEE API. Cc: Michael Chan <michael.chan@broadcom.com> Signed-off-by:
Vasundhara Volam <vasundhara-v.volam@broadcom.com> Signed-off-by:
Sheetal Tigadoli <sheetal.tigadoli@broadcom.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Vikas Gupta authored
This driver registers on TEE bus to interact with OP-TEE based BNXT firmware management modules Cc: Jakub Kicinski <jakub.kicinski@netronome.com> Reported-by:
kbuild test robot <lkp@intel.com> Signed-off-by:
Vikas Gupta <vikas.gupta@broadcom.com> Signed-off-by:
Sheetal Tigadoli <sheetal.tigadoli@broadcom.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Ido Schimmel says: ==================== mlxsw: Make port split code more generic Jiri says: Currently, we assume some limitations and constant values which are not applicable for Spectrum-3 which has 8 lanes ports (instead of previous 4 lanes). This patch does 2 things: 1) Generalizes the code to not use constants so it can work for 4, 8 and possibly 16 lanes. 2) Enforces some assumptions we had in the code but did not check. ==================== Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Jiri Pirko authored
Make the check generic for any possible value, not only 2 and 4. Signed-off-by:
Jiri Pirko <jiri@mellanox.com> Reviewed-by:
Shalom Toledo <shalomt@mellanox.com> Signed-off-by:
Ido Schimmel <idosch@mellanox.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Jiri Pirko authored
During recreation of original unsplit ports, just simply iterate over the whole gap and recreate whatever originally existed. Signed-off-by:
Jiri Pirko <jiri@mellanox.com> Reviewed-by:
Shalom Toledo <shalomt@mellanox.com> Signed-off-by:
Ido Schimmel <idosch@mellanox.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Jiri Pirko authored
The current code considers only split by 2 or 4. Make the base port getting generic and allow split by 8 to be handled correctly. Generalize the used port checks as well. Signed-off-by:
Jiri Pirko <jiri@mellanox.com> Reviewed-by:
Shalom Toledo <shalomt@mellanox.com> Signed-off-by:
Ido Schimmel <idosch@mellanox.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Jiri Pirko authored
Instead of using constant value, use port_module_max_width which is aligned with the cluster size. Signed-off-by:
Jiri Pirko <jiri@mellanox.com> Reviewed-by:
Shalom Toledo <shalomt@mellanox.com> Signed-off-by:
Ido Schimmel <idosch@mellanox.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Jiri Pirko authored
Don't compute the original base local port during unsplit, rather remember it in mlxsw_sp_port structure during split port creation. Signed-off-by:
Jiri Pirko <jiri@mellanox.com> Reviewed-by:
Shalom Toledo <shalomt@mellanox.com> Signed-off-by:
Ido Schimmel <idosch@mellanox.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Jiri Pirko authored
In Spectrum-3 the modules have 8 lanes, so split by count 2 results in two split ports each of 4 lanes. Add a resource that can be used to obtain local port offset in that case. Signed-off-by:
Jiri Pirko <jiri@mellanox.com> Signed-off-by:
Ido Schimmel <idosch@mellanox.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Jiri Pirko authored
Get local port offsets of split port in a separate helper function and use it in both split and unsplit function. Signed-off-by:
Jiri Pirko <jiri@mellanox.com> Reviewed-by:
Shalom Toledo <shalomt@mellanox.com> Signed-off-by:
Ido Schimmel <idosch@mellanox.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Jiri Pirko authored
Driver assumes certain values in the PMLP register. Add checks that verify that PMLP register provides fitting values. Signed-off-by:
Jiri Pirko <jiri@mellanox.com> Reviewed-by:
Shalom Toledo <shalomt@mellanox.com> Signed-off-by:
Ido Schimmel <idosch@mellanox.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Jiri Pirko authored
Pass the port mapping structure down to create, module_map and other function instead of individual values. Signed-off-by:
Jiri Pirko <jiri@mellanox.com> Reviewed-by:
Shalom Toledo <shalomt@mellanox.com> Signed-off-by:
Ido Schimmel <idosch@mellanox.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-