- Nov 18, 2019
-
-
Davidlohr Bueso authored
At a slight footprint cost (24 vs 32 bytes), mutexes are more optimal than semaphores; it's also a nicer interface for mutual exclusion, which is why they are encouraged over binary semaphores, when possible. For both i_link_lock and i_ext_lock (and hence i_hash_lock which I annotated for the hash lock mapping hackery for lockdep), their semantics imply traditional lock ownership; that is, the lock owner is the same for both lock/unlock operations and does not run in irq context. Therefore it is safe to convert. Signed-off-by:
Davidlohr Bueso <dbueso@suse.de> Signed-off-by:
David Sterba <dsterba@suse.com>
-
Linus Torvalds authored
-
git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommuLinus Torvalds authored
Pull iommu fixes from Joerg Roedel: - Fix for Intel IOMMU to correct invalidation commands when in SVA mode. - Update MAINTAINERS entry for Intel IOMMU * tag 'iommu-fixes-v5.4-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: iommu/vt-d: Fix QI_DEV_IOTLB_PFSID and QI_DEV_EIOTLB_PFSID macros MAINTAINERS: Update for INTEL IOMMU (VT-d) entry
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull misc scheduler fixes from Ingo Molnar: - Fix potential deadlock under CONFIG_DEBUG_OBJECTS=y - PELT metrics update ordering fix - uclamp logic fix * 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: sched/uclamp: Fix incorrect condition sched/pelt: Fix update of blocked PELT ordering sched/core: Avoid spurious lock dependencies
-
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linuxLinus Torvalds authored
Pull i2c fixes from Wolfram Sang: "An I2C core fix to prevent a use-after-free in a rare error path, and an I2C ACPI addition to work around broken HW/firmware related to touchscreens" * 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: i2c: core: fix use after free in of_i2c_notify i2c: acpi: Force bus speed to 400KHz if a Silead touchscreen is present
-
- Nov 17, 2019
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6Linus Torvalds authored
Pull crypto fix from Herbert Xu: "This reverts a number of changes to the khwrng thread which feeds the kernel random number pool from hwrng drivers. They were trying to fix issues with suspend-and-resume but ended up causing regressions" * 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: Revert "hwrng: core - Freeze khwrng thread during suspend"
-
Herbert Xu authored
This reverts commit 03a3bb7a ("hwrng: core - Freeze khwrng thread during suspend"), ff296293 ("random: Support freezable kthreads in add_hwgenerator_randomness()") and 59b56948 ("random: Use wait_event_freezable() in add_hwgenerator_randomness()"). These patches introduced regressions and we need more time to get them ready for mainline. Signed-off-by:
Herbert Xu <herbert@gondor.apana.org.au>
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull x86 fixes from Ingo Molnar: "Two fixes: disable unreliable HPET on Intel Coffe Lake platforms, and fix a lockdep splat in the resctrl code" * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/resctrl: Fix potential lockdep warning x86/quirks: Disable HPET on Intel Coffe Lake platforms
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull timer fix from Ingo Molnar: "Fix integer truncation bug in __do_adjtimex()" * 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: ntp/y2038: Remove incorrect time_t truncation
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull perf fixes from Ingo Molnar: "Misc fixes: a handful of AUX event handling related fixes, a Sparse fix and two ABI fixes" * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf/core: Fix missing static inline on perf_cgroup_switch() perf/core: Consistently fail fork on allocation failures perf/aux: Disallow aux_output for kernel events perf/core: Reattach a misplaced comment perf/aux: Fix the aux_output group inheritance fix perf/core: Disallow uncore-cgroup events
-
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netLinus Torvalds authored
Pull networking fixes from David Miller: 1) Fix memory leak in xfrm_state code, from Steffen Klassert. 2) Fix races between devlink reload operations and device setup/cleanup, from Jiri Pirko. 3) Null deref in NFC code, from Stephan Gerhold. 4) Refcount fixes in SMC, from Ursula Braun. 5) Memory leak in slcan open error paths, from Jouni Hogander. 6) Fix ETS bandwidth validation in hns3, from Yonglong Liu. 7) Info leak on short USB request answers in ax88172a driver, from Oliver Neukum. 8) Release mem region properly in ep93xx_eth, from Chuhong Yuan. 9) PTP config timestamp flags validation, from Richard Cochran. 10) Dangling pointers after SKB data realloc in seg6, from Andrea Mayer. 11) Missing free_netdev() in gemini driver, from Chuhong Yuan. * git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (56 commits) ipmr: Fix skb headroom in ipmr_get_route(). net: hns3: cleanup of stray struct hns3_link_mode_mapping net/smc: fix fastopen for non-blocking connect() rds: ib: update WR sizes when bringing up connection net: gemini: add missed free_netdev net: dsa: tag_8021q: Fix dsa_8021q_restore_pvid for an absent pvid seg6: fix skb transport_header after decap_and_validate() seg6: fix srh pointer in get_srh() net: stmmac: Use the correct style for SPDX License Identifier octeontx2-af: Use the correct style for SPDX License Identifier ptp: Extend the test program to check the external time stamp flags. mlx5: Reject requests to enable time stamping on both edges. igb: Reject requests that fail to enable time stamping on both edges. dp83640: Reject requests to enable time stamping on both edges. mv88e6xxx: Reject requests to enable time stamping on both edges. ptp: Introduce strict checking of external time stamp options. renesas: reject unsupported external timestamp flags mlx5: reject unsupported external timestamp flags igb: reject unsupported external timestamp flags dp83640: reject unsupported external timestamp flags ...
-
Guillaume Nault authored
In route.c, inet_rtm_getroute_build_skb() creates an skb with no headroom. This skb is then used by inet_rtm_getroute() which may pass it to rt_fill_info() and, from there, to ipmr_get_route(). The later might try to reuse this skb by cloning it and prepending an IPv4 header. But since the original skb has no headroom, skb_push() triggers skb_under_panic(): skbuff: skb_under_panic: text:00000000ca46ad8a len:80 put:20 head:00000000cd28494e data:000000009366fd6b tail:0x3c end:0xec0 dev:veth0 ------------[ cut here ]------------ kernel BUG at net/core/skbuff.c:108! invalid opcode: 0000 [#1] SMP KASAN PTI CPU: 6 PID: 587 Comm: ip Not tainted 5.4.0-rc6+ #1 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.12.0-2.fc30 04/01/2014 RIP: 0010:skb_panic+0xbf/0xd0 Code: 41 a2 ff 8b 4b 70 4c 8b 4d d0 48 c7 c7 20 76 f5 8b 44 8b 45 bc 48 8b 55 c0 48 8b 75 c8 41 54 41 57 41 56 41 55 e8 75 dc 7a ff <0f> 0b 0f 1f 44 00 00 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 RSP: 0018:ffff888059ddf0b0 EFLAGS: 00010286 RAX: 0000000000000086 RBX: ffff888060a315c0 RCX: ffffffff8abe4822 RDX: 0000000000000000 RSI: 0000000000000008 RDI: ffff88806c9a79cc RBP: ffff888059ddf118 R08: ffffed100d9361b1 R09: ffffed100d9361b0 R10: ffff88805c68aee3 R11: ffffed100d9361b1 R12: ffff88805d218000 R13: ffff88805c689fec R14: 000000000000003c R15: 0000000000000ec0 FS: 00007f6af184b700(0000) GS:ffff88806c980000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007ffc8204a000 CR3: 0000000057b40006 CR4: 0000000000360ee0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: skb_push+0x7e/0x80 ipmr_get_route+0x459/0x6fa rt_fill_info+0x692/0x9f0 inet_rtm_getroute+0xd26/0xf20 rtnetlink_rcv_msg+0x45d/0x630 netlink_rcv_skb+0x1a5/0x220 rtnetlink_rcv+0x15/0x20 netlink_unicast+0x305/0x3a0 netlink_sendmsg+0x575/0x730 sock_sendmsg+0xb5/0xc0 ___sys_sendmsg+0x497/0x4f0 __sys_sendmsg+0xcb/0x150 __x64_sys_sendmsg+0x48/0x50 do_syscall_64+0xd2/0xac0 entry_SYSCALL_64_after_hwframe+0x49/0xbe Actually the original skb used to have enough headroom, but the reserve_skb() call was lost with the introduction of inet_rtm_getroute_build_skb() by commit 404eb77e ("ipv4: support sport, dport and ip_proto in RTM_GETROUTE"). We could reserve some headroom again in inet_rtm_getroute_build_skb(), but this function shouldn't be responsible for handling the special case of ipmr_get_route(). Let's handle that directly in ipmr_get_route() by calling skb_realloc_headroom() instead of skb_clone(). Fixes: 404eb77e ("ipv4: support sport, dport and ip_proto in RTM_GETROUTE") Signed-off-by:
Guillaume Nault <gnault@redhat.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Salil Mehta authored
This patch cleans-up the stray left over code. It has no functionality impact. Signed-off-by:
Salil Mehta <salil.mehta@huawei.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Ursula Braun authored
FASTOPEN does not work with SMC-sockets. Since SMC allows fallback to TCP native during connection start, the FASTOPEN setsockopts trigger this fallback, if the SMC-socket is still in state SMC_INIT. But if a FASTOPEN setsockopt is called after a non-blocking connect(), this is broken, and fallback does not make sense. This change complements commit cd206360 ("net/smc: avoid fallback in case of non-blocking connect") and fixes the syzbot reported problem "WARNING in smc_unhash_sk". Reported-by:
<syzbot+8488cc4cf1c9e09b8b86@syzkaller.appspotmail.com> Fixes: e1bbdd57 ("net/smc: reduce sock_put() for fallback sockets") Signed-off-by:
Ursula Braun <ubraun@linux.ibm.com> Signed-off-by:
Karsten Graul <kgraul@linux.ibm.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Dag Moxnes authored
Currently WR sizes are updated from rds_ib_sysctl_max_send_wr and rds_ib_sysctl_max_recv_wr when a connection is shut down. As a result, a connection being down while rds_ib_sysctl_max_send_wr or rds_ib_sysctl_max_recv_wr are updated, will not update the sizes when it comes back up. Move resizing of WRs to rds_ib_setup_qp so that connections will be setup with the most current WR sizes. Signed-off-by:
Dag Moxnes <dag.moxnes@oracle.com> Acked-by:
Santosh Shilimkar <santosh.shilimkar@oracle.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Chuhong Yuan authored
This driver forgets to free allocated netdev in remove like what is done in probe failure. Add the free to fix it. Signed-off-by:
Chuhong Yuan <hslester96@gmail.com> Reviewed-by:
Linus Walleij <linus.walleij@linaro.org> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Vladimir Oltean authored
This sequence of operations: ip link set dev br0 type bridge vlan_filtering 1 bridge vlan del dev swp2 vid 1 ip link set dev br0 type bridge vlan_filtering 1 ip link set dev br0 type bridge vlan_filtering 0 apparently fails with the message: [ 31.305716] sja1105 spi0.1: Reset switch and programmed static config. Reason: VLAN filtering [ 31.322161] sja1105 spi0.1: Couldn't determine PVID attributes (pvid 0) [ 31.328939] sja1105 spi0.1: Failed to setup VLAN tagging for port 1: -2 [ 31.335599] ------------[ cut here ]------------ [ 31.340215] WARNING: CPU: 1 PID: 194 at net/switchdev/switchdev.c:157 switchdev_port_attr_set_now+0x9c/0xa4 [ 31.349981] br0: Commit of attribute (id=6) failed. [ 31.354890] Modules linked in: [ 31.357942] CPU: 1 PID: 194 Comm: ip Not tainted 5.4.0-rc6-01792-gf4f632e07665-dirty #2062 [ 31.366167] Hardware name: Freescale LS1021A [ 31.370437] [<c03144dc>] (unwind_backtrace) from [<c030e184>] (show_stack+0x10/0x14) [ 31.378153] [<c030e184>] (show_stack) from [<c11d1c1c>] (dump_stack+0xe0/0x10c) [ 31.385437] [<c11d1c1c>] (dump_stack) from [<c034c730>] (__warn+0xf4/0x10c) [ 31.392373] [<c034c730>] (__warn) from [<c034c7bc>] (warn_slowpath_fmt+0x74/0xb8) [ 31.399827] [<c034c7bc>] (warn_slowpath_fmt) from [<c11ca204>] (switchdev_port_attr_set_now+0x9c/0xa4) [ 31.409097] [<c11ca204>] (switchdev_port_attr_set_now) from [<c117036c>] (__br_vlan_filter_toggle+0x6c/0x118) [ 31.418971] [<c117036c>] (__br_vlan_filter_toggle) from [<c115d010>] (br_changelink+0xf8/0x518) [ 31.427637] [<c115d010>] (br_changelink) from [<c0f8e9ec>] (__rtnl_newlink+0x3f4/0x76c) [ 31.435613] [<c0f8e9ec>] (__rtnl_newlink) from [<c0f8eda8>] (rtnl_newlink+0x44/0x60) [ 31.443329] [<c0f8eda8>] (rtnl_newlink) from [<c0f89f20>] (rtnetlink_rcv_msg+0x2cc/0x51c) [ 31.451477] [<c0f89f20>] (rtnetlink_rcv_msg) from [<c1008df8>] (netlink_rcv_skb+0xb8/0x110) [ 31.459796] [<c1008df8>] (netlink_rcv_skb) from [<c1008648>] (netlink_unicast+0x17c/0x1f8) [ 31.468026] [<c1008648>] (netlink_unicast) from [<c1008980>] (netlink_sendmsg+0x2bc/0x3b4) [ 31.476261] [<c1008980>] (netlink_sendmsg) from [<c0f43858>] (___sys_sendmsg+0x230/0x250) [ 31.484408] [<c0f43858>] (___sys_sendmsg) from [<c0f44c84>] (__sys_sendmsg+0x50/0x8c) [ 31.492209] [<c0f44c84>] (__sys_sendmsg) from [<c0301000>] (ret_fast_syscall+0x0/0x28) [ 31.500090] Exception stack(0xedf47fa8 to 0xedf47ff0) [ 31.505122] 7fa0: 00000002 b6f2e060 00000003 beabd6a4 00000000 00000000 [ 31.513265] 7fc0: 00000002 b6f2e060 5d6e3213 00000128 00000000 00000001 00000006 000619c4 [ 31.521405] 7fe0: 00086078 beabd658 0005edbc b6e7ce68 The reason is the implementation of br_get_pvid: static inline u16 br_get_pvid(const struct net_bridge_vlan_group *vg) { if (!vg) return 0; smp_rmb(); return vg->pvid; } Since VID 0 is an invalid pvid from the bridge's point of view, let's add this check in dsa_8021q_restore_pvid to avoid restoring a pvid that doesn't really exist. Fixes: 5f33183b ("net: dsa: tag_8021q: Restore bridge VLANs when enabling vlan_filtering") Signed-off-by:
Vladimir Oltean <olteanv@gmail.com> Reviewed-by:
Andrew Lunn <andrew@lunn.ch> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Andrea Mayer says: ==================== seg6: fixes to Segment Routing in IPv6 This patchset is divided in 2 patches and it introduces some fixes to Segment Routing in IPv6, which are: - in function get_srh() fix the srh pointer after calling pskb_may_pull(); - fix the skb->transport_header after calling decap_and_validate() function; Any comments on the patchset are welcome. ==================== Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Andrea Mayer authored
in the receive path (more precisely in ip6_rcv_core()) the skb->transport_header is set to skb->network_header + sizeof(*hdr). As a consequence, after routing operations, destination input expects to find skb->transport_header correctly set to the next protocol (or extension header) that follows the network protocol. However, decap behaviors (DX*, DT*) remove the outer IPv6 and SRH extension and do not set again the skb->transport_header pointer correctly. For this reason, the patch sets the skb->transport_header to the skb->network_header + sizeof(hdr) in each DX* and DT* behavior. Signed-off-by:
Andrea Mayer <andrea.mayer@uniroma2.it> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Andrea Mayer authored
pskb_may_pull may change pointers in header. For this reason, it is mandatory to reload any pointer that points into skb header. Signed-off-by:
Andrea Mayer <andrea.mayer@uniroma2.it> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Nishad Kamdar authored
This patch corrects the SPDX License Identifier style in header files related to STMicroelectronics based Multi-Gigabit Ethernet driver. For C header files Documentation/process/license-rules.rst mandates C-like comments (opposed to C source files where C++ style should be used). Changes made by using a script provided by Joe Perches here: https://lkml.org/lkml/2019/2/7/46. Suggested-by:
Joe Perches <joe@perches.com> Signed-off-by:
Nishad Kamdar <nishadkamdar@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Nishad Kamdar authored
This patch corrects the SPDX License Identifier style in header files related to Marvell OcteonTX2 network devices. It uses an expilict block comment for the SPDX License Identifier. Changes made by using a script provided by Joe Perches here: https://lkml.org/lkml/2019/2/7/46. Suggested-by:
Joe Perches <joe@perches.com> Signed-off-by:
Nishad Kamdar <nishadkamdar@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Linus Torvalds authored
Merge misc fixes from Andrew Morton: "11 fixes" MM fixes and one xz decompressor fix. * emailed patches from Andrew Morton <akpm@linux-foundation.org>: mm/debug.c: PageAnon() is true for PageKsm() pages mm/debug.c: __dump_page() prints an extra line mm/page_io.c: do not free shared swap slots mm/memory_hotplug: fix try_offline_node() mm,thp: recheck each page before collapsing file THP mm: slub: really fix slab walking for init_on_free mm: hugetlb: switch to css_tryget() in hugetlb_cgroup_charge_cgroup() mm: memcg: switch to css_tryget() in get_mem_cgroup_from_mm() lib/xz: fix XZ_DYNALLOC to avoid useless memory reallocations mm: fix trying to reclaim unevictable lru page when calling madvise_pageout mm: mempolicy: fix the wrong return value and potential pages leak of mbind
-
- Nov 16, 2019
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/inputLinus Torvalds authored
Pull more input fixes from Dmitry Torokhov: "A couple of fixes in driver teardown paths and another ID for Synaptics RMI mode" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: synaptics - enable RMI mode for X1 Extreme 2nd Generation Input: synaptics-rmi4 - destroy F54 poller workqueue when removing Input: ff-memless - kill timer in destroy()
-
Ralph Campbell authored
PageAnon() and PageKsm() use the low two bits of the page->mapping pointer to indicate the page type. PageAnon() only checks the LSB while PageKsm() checks the least significant 2 bits are equal to 3. Therefore, PageAnon() is true for KSM pages. __dump_page() incorrectly will never print "ksm" because it checks PageAnon() first. Fix this by checking PageKsm() first. Link: http://lkml.kernel.org/r/20191113000651.20677-1-rcampbell@nvidia.com Fixes: 1c6fb1d8 ("mm: print more information about mapping in __dump_page") Signed-off-by:
Ralph Campbell <rcampbell@nvidia.com> Acked-by:
Michal Hocko <mhocko@suse.com> Cc: Jerome Glisse <jglisse@redhat.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Ralph Campbell authored
When dumping struct page information, __dump_page() prints the page type with a trailing blank followed by the page flags on a separate line: anon flags: 0x100000000090034(uptodate|lru|active|head|swapbacked) It looks like the intent was to use pr_cont() for printing "flags:" but pr_cont() usage is discouraged so fix this by extending the format to include the flags into a single line: anon flags: 0x100000000090034(uptodate|lru|active|head|swapbacked) If the page is file backed, the name might be long so use two lines: shmem_aops name:"dev/zero" flags: 0x10000000008000c(uptodate|dirty|swapbacked) Eliminate pr_conf() usage as well for appending compound_mapcount. Link: http://lkml.kernel.org/r/20191112012608.16926-1-rcampbell@nvidia.com Signed-off-by:
Ralph Campbell <rcampbell@nvidia.com> Reviewed-by:
Andrew Morton <akpm@linux-foundation.org> Cc: Jerome Glisse <jglisse@redhat.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Vinayak Menon authored
The following race is observed due to which a processes faulting on a swap entry, finds the page neither in swapcache nor swap. This causes zram to give a zero filled page that gets mapped to the process, resulting in a user space crash later. Consider parent and child processes Pa and Pb sharing the same swap slot with swap_count 2. Swap is on zram with SWP_SYNCHRONOUS_IO set. Virtual address 'VA' of Pa and Pb points to the shared swap entry. Pa Pb fault on VA fault on VA do_swap_page do_swap_page lookup_swap_cache fails lookup_swap_cache fails Pb scheduled out swapin_readahead (deletes zram entry) swap_free (makes swap_count 1) Pb scheduled in swap_readpage (swap_count == 1) Takes SWP_SYNCHRONOUS_IO path zram enrty absent zram gives a zero filled page Fix this by making sure that swap slot is freed only when swap count drops down to one. Link: http://lkml.kernel.org/r/1571743294-14285-1-git-send-email-vinmenon@codeaurora.org Fixes: aa8d22a1 ("mm: swap: SWP_SYNCHRONOUS_IO: skip swapcache only if swapped page has no other reference") Signed-off-by:
Vinayak Menon <vinmenon@codeaurora.org> Suggested-by:
Minchan Kim <minchan@google.com> Acked-by:
Minchan Kim <minchan@kernel.org> Cc: Michal Hocko <mhocko@suse.com> Cc: Hugh Dickins <hughd@google.com> Cc: <stable@vger.kernel.org> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
David Hildenbrand authored
try_offline_node() is pretty much broken right now: - The node span is updated when onlining memory, not when adding it. We ignore memory that was mever onlined. Bad. - We touch possible garbage memmaps. The pfn_to_nid(pfn) can easily trigger a kernel panic. Bad for memory that is offline but also bad for subsection hotadd with ZONE_DEVICE, whereby the memmap of the first PFN of a section might contain garbage. - Sections belonging to mixed nodes are not properly considered. As memory blocks might belong to multiple nodes, we would have to walk all pageblocks (or at least subsections) within present sections. However, we don't have a way to identify whether a memmap that is not online was initialized (relevant for ZONE_DEVICE). This makes things more complicated. Luckily, we can piggy pack on the node span and the nid stored in memory blocks. Currently, the node span is grown when calling move_pfn_range_to_zone() - e.g., when onlining memory, and shrunk when removing memory, before calling try_offline_node(). Sysfs links are created via link_mem_sections(), e.g., during boot or when adding memory. If the node still spans memory or if any memory block belongs to the nid, we don't set the node offline. As memory blocks that span multiple nodes cannot get offlined, the nid stored in memory blocks is reliable enough (for such online memory blocks, the node still spans the memory). Introduce for_each_memory_block() to efficiently walk all memory blocks. Note: We will soon stop shrinking the ZONE_DEVICE zone and the node span when removing ZONE_DEVICE memory to fix similar issues (access of garbage memmaps) - until we have a reliable way to identify whether these memmaps were properly initialized. This implies later, that once a node had ZONE_DEVICE memory, we won't be able to set a node offline - which should be acceptable. Since commit f1dd2cd1 ("mm, memory_hotplug: do not associate hotadded memory to zones until online") memory that is added is not assoziated with a zone/node (memmap not initialized). The introducing commit 60a5a19e ("memory-hotplug: remove sysfs file of node") already missed that we could have multiple nodes for a section and that the zone/node span is updated when onlining pages, not when adding them. I tested this by hotplugging two DIMMs to a memory-less and cpu-less NUMA node. The node is properly onlined when adding the DIMMs. When removing the DIMMs, the node is properly offlined. Masayoshi Mizuma reported: : Without this patch, memory hotplug fails as panic: : : BUG: kernel NULL pointer dereference, address: 0000000000000000 : ... : Call Trace: : remove_memory_block_devices+0x81/0xc0 : try_remove_memory+0xb4/0x130 : __remove_memory+0xa/0x20 : acpi_memory_device_remove+0x84/0x100 : acpi_bus_trim+0x57/0x90 : acpi_bus_trim+0x2e/0x90 : acpi_device_hotplug+0x2b2/0x4d0 : acpi_hotplug_work_fn+0x1a/0x30 : process_one_work+0x171/0x380 : worker_thread+0x49/0x3f0 : kthread+0xf8/0x130 : ret_from_fork+0x35/0x40 [david@redhat.com: v3] Link: http://lkml.kernel.org/r/20191102120221.7553-1-david@redhat.com Link: http://lkml.kernel.org/r/20191028105458.28320-1-david@redhat.com Fixes: 60a5a19e ("memory-hotplug: remove sysfs file of node") Fixes: f1dd2cd1 ("mm, memory_hotplug: do not associate hotadded memory to zones until online") # visiable after d0dc12e8 Signed-off-by:
David Hildenbrand <david@redhat.com> Tested-by:
Masayoshi Mizuma <m.mizuma@jp.fujitsu.com> Cc: Tang Chen <tangchen@cn.fujitsu.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: "Rafael J. Wysocki" <rafael@kernel.org> Cc: Keith Busch <keith.busch@intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: "Peter Zijlstra (Intel)" <peterz@infradead.org> Cc: Jani Nikula <jani.nikula@intel.com> Cc: Nayna Jain <nayna@linux.ibm.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Oscar Salvador <osalvador@suse.de> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Pavel Tatashin <pasha.tatashin@soleen.com> Cc: <stable@vger.kernel.org> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Song Liu authored
In collapse_file(), for !is_shmem case, current check cannot guarantee the locked page is up-to-date. Specifically, xas_unlock_irq() should not be called before lock_page() and get_page(); and it is necessary to recheck PageUptodate() after locking the page. With this bug and CONFIG_READ_ONLY_THP_FOR_FS=y, madvise(HUGE)'ed .text may contain corrupted data. This is because khugepaged mistakenly collapses some not up-to-date sub pages into a huge page, and assumes the huge page is up-to-date. This will NOT corrupt data in the disk, because the page is read-only and never written back. Fix this by properly checking PageUptodate() after locking the page. This check replaces "VM_BUG_ON_PAGE(!PageUptodate(page), page);". Also, move PageDirty() check after locking the page. Current khugepaged should not try to collapse dirty file THP, because it is limited to read-only .text. The only case we hit a dirty page here is when the page hasn't been written since write. Bail out and retry when this happens. syzbot reported bug on previous version of this patch. Link: http://lkml.kernel.org/r/20191106060930.2571389-2-songliubraving@fb.com Fixes: 99cb0dbd ("mm,thp: add read-only THP support for (non-shmem) FS") Signed-off-by:
Song Liu <songliubraving@fb.com> Reported-by:
<syzbot+efb9e48b9fbdc49bb34a@syzkaller.appspotmail.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Hugh Dickins <hughd@google.com> Cc: William Kucharski <william.kucharski@oracle.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Laura Abbott authored
Commit 1b7e816f ("mm: slub: Fix slab walking for init_on_free") fixed one problem with the slab walking but missed a key detail: When walking the list, the head and tail pointers need to be updated since we end up reversing the list as a result. Without doing this, bulk free is broken. One way this is exposed is a NULL pointer with slub_debug=F: ============================================================================= BUG skbuff_head_cache (Tainted: G T): Object already free ----------------------------------------------------------------------------- INFO: Slab 0x000000000d2d2f8f objects=16 used=3 fp=0x0000000064309071 flags=0x3fff00000000201 BUG: kernel NULL pointer dereference, address: 0000000000000000 Oops: 0000 [#1] PREEMPT SMP PTI RIP: 0010:print_trailer+0x70/0x1d5 Call Trace: <IRQ> free_debug_processing.cold.37+0xc9/0x149 __slab_free+0x22a/0x3d0 kmem_cache_free_bulk+0x415/0x420 __kfree_skb_flush+0x30/0x40 net_rx_action+0x2dd/0x480 __do_softirq+0xf0/0x246 irq_exit+0x93/0xb0 do_IRQ+0xa0/0x110 common_interrupt+0xf/0xf </IRQ> Given we're now almost identical to the existing debugging code which correctly walks the list, combine with that. Link: https://lkml.kernel.org/r/20191104170303.GA50361@gandi.net Link: http://lkml.kernel.org/r/20191106222208.26815-1-labbott@redhat.com Fixes: 1b7e816f ("mm: slub: Fix slab walking for init_on_free") Signed-off-by:
Laura Abbott <labbott@redhat.com> Reported-by:
Thibaut Sautereau <thibaut.sautereau@clip-os.org> Acked-by:
David Rientjes <rientjes@google.com> Tested-by:
Alexander Potapenko <glider@google.com> Acked-by:
Alexander Potapenko <glider@google.com> Cc: Kees Cook <keescook@chromium.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: <clipos@ssi.gouv.fr> Cc: Christoph Lameter <cl@linux.com> Cc: Pekka Enberg <penberg@kernel.org> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: <stable@vger.kernel.org> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Roman Gushchin authored
An exiting task might belong to an offline cgroup. In this case an attempt to grab a cgroup reference from the task can end up with an infinite loop in hugetlb_cgroup_charge_cgroup(), because neither the cgroup will become online, neither the task will be migrated to a live cgroup. Fix this by switching over to css_tryget(). As css_tryget_online() can't guarantee that the cgroup won't go offline, in most cases the check doesn't make sense. In this particular case users of hugetlb_cgroup_charge_cgroup() are not affected by this change. A similar problem is described by commit 18fa84a2 ("cgroup: Use css_tryget() instead of css_tryget_online() in task_get_css()"). Link: http://lkml.kernel.org/r/20191106225131.3543616-2-guro@fb.com Signed-off-by:
Roman Gushchin <guro@fb.com> Acked-by:
Johannes Weiner <hannes@cmpxchg.org> Acked-by:
Tejun Heo <tj@kernel.org> Reviewed-by:
Shakeel Butt <shakeelb@google.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: <stable@vger.kernel.org> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Roman Gushchin authored
We've encountered a rcu stall in get_mem_cgroup_from_mm(): rcu: INFO: rcu_sched self-detected stall on CPU rcu: 33-....: (21000 ticks this GP) idle=6c6/1/0x4000000000000002 softirq=35441/35441 fqs=5017 (t=21031 jiffies g=324821 q=95837) NMI backtrace for cpu 33 <...> RIP: 0010:get_mem_cgroup_from_mm+0x2f/0x90 <...> __memcg_kmem_charge+0x55/0x140 __alloc_pages_nodemask+0x267/0x320 pipe_write+0x1ad/0x400 new_sync_write+0x127/0x1c0 __kernel_write+0x4f/0xf0 dump_emit+0x91/0xc0 writenote+0xa0/0xc0 elf_core_dump+0x11af/0x1430 do_coredump+0xc65/0xee0 get_signal+0x132/0x7c0 do_signal+0x36/0x640 exit_to_usermode_loop+0x61/0xd0 do_syscall_64+0xd4/0x100 entry_SYSCALL_64_after_hwframe+0x44/0xa9 The problem is caused by an exiting task which is associated with an offline memcg. We're iterating over and over in the do {} while (!css_tryget_online()) loop, but obviously the memcg won't become online and the exiting task won't be migrated to a live memcg. Let's fix it by switching from css_tryget_online() to css_tryget(). As css_tryget_online() cannot guarantee that the memcg won't go offline, the check is usually useless, except some rare cases when for example it determines if something should be presented to a user. A similar problem is described by commit 18fa84a2 ("cgroup: Use css_tryget() instead of css_tryget_online() in task_get_css()"). Johannes: : The bug aside, it doesn't matter whether the cgroup is online for the : callers. It used to matter when offlining needed to evacuate all charges : from the memcg, and so needed to prevent new ones from showing up, but we : don't care now. Link: http://lkml.kernel.org/r/20191106225131.3543616-1-guro@fb.com Signed-off-by:
Roman Gushchin <guro@fb.com> Acked-by:
Johannes Weiner <hannes@cmpxchg.org> Acked-by:
Tejun Heo <tj@kernel.org> Reviewed-by:
Shakeel Butt <shakeeb@google.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Michal Koutn <mkoutny@suse.com> Cc: <stable@vger.kernel.org> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Lasse Collin authored
s->dict.allocated was initialized to 0 but never set after a successful allocation, thus the code always thought that the dictionary buffer has to be reallocated. Link: http://lkml.kernel.org/r/20191104185107.3b6330df@tukaani.org Signed-off-by:
Lasse Collin <lasse.collin@tukaani.org> Reported-by:
Yu Sun <yusun2@cisco.com> Acked-by:
Daniel Walker <danielwa@cisco.com> Cc: "Yixia Si (yisi)" <yisi@cisco.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
zhong jiang authored
Recently, I hit the following issue when running upstream. kernel BUG at mm/vmscan.c:1521! invalid opcode: 0000 [#1] SMP KASAN PTI CPU: 0 PID: 23385 Comm: syz-executor.6 Not tainted 5.4.0-rc4+ #1 RIP: 0010:shrink_page_list+0x12b6/0x3530 mm/vmscan.c:1521 Call Trace: reclaim_pages+0x499/0x800 mm/vmscan.c:2188 madvise_cold_or_pageout_pte_range+0x58a/0x710 mm/madvise.c:453 walk_pmd_range mm/pagewalk.c:53 [inline] walk_pud_range mm/pagewalk.c:112 [inline] walk_p4d_range mm/pagewalk.c:139 [inline] walk_pgd_range mm/pagewalk.c:166 [inline] __walk_page_range+0x45a/0xc20 mm/pagewalk.c:261 walk_page_range+0x179/0x310 mm/pagewalk.c:349 madvise_pageout_page_range mm/madvise.c:506 [inline] madvise_pageout+0x1f0/0x330 mm/madvise.c:542 madvise_vma mm/madvise.c:931 [inline] __do_sys_madvise+0x7d2/0x1600 mm/madvise.c:1113 do_syscall_64+0x9f/0x4c0 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe madvise_pageout() accesses the specified range of the vma and isolates them, then runs shrink_page_list() to reclaim its memory. But it also isolates the unevictable pages to reclaim. Hence, we can catch the cases in shrink_page_list(). The root cause is that we scan the page tables instead of specific LRU list. and so we need to filter out the unevictable lru pages from our end. Link: http://lkml.kernel.org/r/1572616245-18946-1-git-send-email-zhongjiang@huawei.com Fixes: 1a4e58cc ("mm: introduce MADV_PAGEOUT") Signed-off-by:
zhong jiang <zhongjiang@huawei.com> Suggested-by:
Johannes Weiner <hannes@cmpxchg.org> Acked-by:
Johannes Weiner <hannes@cmpxchg.org> Acked-by:
Minchan Kim <minchan@kernel.org> Acked-by:
Michal Hocko <mhocko@suse.com> Cc: <stable@vger.kernel.org> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Yang Shi authored
Commit d8835445 ("mm: mempolicy: make the behavior consistent when MPOL_MF_MOVE* and MPOL_MF_STRICT were specified") fixed the return value of mbind() for a couple of corner cases. But, it altered the errno for some other cases, for example, mbind() should return -EFAULT when part or all of the memory range specified by nodemask and maxnode points outside your accessible address space, or there was an unmapped hole in the specified memory range specified by addr and len. Fix this by preserving the errno returned by queue_pages_range(). And, the pagelist may be not empty even though queue_pages_range() returns error, put the pages back to LRU since mbind_range() is not called to really apply the policy so those pages should not be migrated, this is also the old behavior before the problematic commit. Link: http://lkml.kernel.org/r/1572454731-3925-1-git-send-email-yang.shi@linux.alibaba.com Fixes: d8835445 ("mm: mempolicy: make the behavior consistent when MPOL_MF_MOVE* and MPOL_MF_STRICT were specified") Signed-off-by:
Yang Shi <yang.shi@linux.alibaba.com> Reported-by:
Li Xinhai <lixinhai.lxh@gmail.com> Reviewed-by:
Li Xinhai <lixinhai.lxh@gmail.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Michal Hocko <mhocko@suse.com> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: <stable@vger.kernel.org> [4.19 and 5.2+] Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Lyude Paul authored
Just got one of these for debugging some unrelated issues, and noticed that Lenovo seems to have gone back to using RMI4 over smbus with Synaptics touchpads on some of their new systems, particularly this one. So, let's enable RMI mode for the X1 Extreme 2nd Generation. Signed-off-by:
Lyude Paul <lyude@redhat.com> Link: https://lore.kernel.org/r/20191115221814.31903-1-lyude@redhat.com Signed-off-by:
Dmitry Torokhov <dmitry.torokhov@gmail.com>
-
git://git.kernel.dk/linux-blockLinus Torvalds authored
Pull block fixes from Jens Axboe: "A few fixes that should make it into this release. This contains: - io_uring: - The timeout command assumes sequence == 0 means that we want one completion, but this kind of overloading is unfortunate as it prevents users from doing a pure time based wait. Since this operation was introduced in this cycle, let's correct it now, while we can. (me) - One-liner to fix an issue with dependent links and fixed buffer reads. The actual IO completed fine, but the link got severed since we stored the wrong expected value. (me) - Add TIMEOUT to list of opcodes that don't need a file. (Pavel) - rsxx missing workqueue destry calls. Old bug. (Chuhong) - Fix blk-iocost active list check (Jiufei) - Fix impossible-to-hit overflow merge condition, that still hit some folks very rarely (Junichi) - Fix bfq hang issue from 5.3. This didn't get marked for stable, but will go into stable post this merge (Paolo)" * tag 'for-linus-20191115' of git://git.kernel.dk/linux-block: rsxx: add missed destroy_workqueue calls in remove iocost: check active_list of all the ancestors in iocg_activate() block, bfq: deschedule empty bfq_queues not referred by any process io_uring: ensure registered buffer import returns the IO length io_uring: Fix getting file for timeout block: check bi_size overflow before merge io_uring: make timeout sequence == 0 mean no sequence
-
Wen Yang authored
We can't use "adap->dev" after it has been freed. Fixes: 5bf4fa7d ("i2c: break out OF support into separate file") Signed-off-by:
Wen Yang <wenyang@linux.alibaba.com> Signed-off-by:
Wolfram Sang <wsa@the-dreams.de>
-
Hans de Goede authored
Many cheap devices use Silead touchscreen controllers. Testing has shown repeatedly that these touchscreen controllers work fine at 400KHz, but for unknown reasons do not work properly at 100KHz. This has been seen on both ARM and x86 devices using totally different i2c controllers. On some devices the ACPI tables list another device at the same I2C-bus as only being capable of 100KHz, testing has shown that these other devices work fine at 400KHz (as can be expected of any recent I2C hw). This commit makes i2c_acpi_find_bus_speed() always return 400KHz if a Silead touchscreen controller is present, fixing the touchscreen not working on devices which ACPI tables' wrongly list another device on the same bus as only being capable of 100KHz. Specifically this fixes the touchscreen on the Jumper EZpad 6 m4 not working. Reported-by:
youling 257 <youling257@gmail.com> Tested-by:
youling 257 <youling257@gmail.com> Signed-off-by:
Hans de Goede <hdegoede@redhat.com> Reviewed-by:
Jarkko Nikula <jarkko.nikula@linux.intel.com> Acked-by:
Mika Westerberg <mika.westerberg@linux.intel.com> [wsa: rewording warning a little] Signed-off-by:
Wolfram Sang <wsa@the-dreams.de> Cc: stable@kernel.org
-
David S. Miller authored
Richard Cochran says: ==================== ptp: Validate the ancillary ioctl flags more carefully. The flags passed to the ioctls for periodic output signals and time stamping of external signals were never checked, and thus formed a useless ABI inadvertently. More recently, a version 2 of the ioctls was introduced in order make the flags meaningful. This series tightens up the checks on the new ioctl flags. - Patch 1 ensures at least one edge flag is set for the new ioctl. - Patches 2-7 are Jacob's recent checks, picking up the tags. - Patch 8 introduces a "strict" flag for passing to the drivers when the new ioctl is used. - Patches 9-12 implement the "strict" checking in the drivers. - Patch 13 extends the test program to exercise combinations of flags. ==================== Signed-off-by:
David S. Miller <davem@davemloft.net>
-