This fixes a compile warning below by properly handling the error code
from sof_get_ctrl_copy_params():
  include/linux/kernel.h:843:43: warning: 'sparams.pl_size' may be used uninitialized in this function [-Wmaybe-uninitialized]
  sound/soc/sof/ipc.c:639:34: note: 'sparams.pl_size' was declared here

The function returns an error before setting sparams.pl_size, so it'd
assign an uninitialized value at a later point.

Fixes: 53e0c72d

 ("ASoC: SOF: Add support for IPC IO between DSP and Host")
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Mark Brown <broonie@kernel.org>

Paper over a trivial case leading to an uninitialized variable compile
warning:
  sound/soc/rockchip/rockchip_pdm.c:179:3: warning: ‘clk_out’ may be used uninitialized in this function [-Wmaybe-uninitialized]

Fixes: 624e8e00

 ("ASoC: rockchip: pdm: fixup pdm fractional div")
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Mark Brown <broonie@kernel.org>

A trivial fix for the randconfig build error:
  sound/soc/sof/ops.c:20:6: warning: ‘ret’ is used uninitialized in this function [-Wuninitialized]

Fixes: d1d95fcb

 ("ASoC: SOF: Add DSP HW abstraction operations")
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

A trivial fix for the randconfig build error:
  sound/soc/codecs/da7219.c:2366:6: warning: unused variable ‘i’ [-Wunused-variable]

Fixes: d90ba6c8

 ("ASoC: da7219: Expose BCLK and WCLK control through CCF")
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Mark Brown <broonie@kernel.org>

Fix kconfig warning for unmet dependency for IOSF_MBI when
PCI is not set/enabled.  Fixes this warning:

WARNING: unmet direct dependencies detected for IOSF_MBI
  Depends on [n]: PCI [=n]
  Selected by [y]:
  - SND_SOC_SOF_ACPI [=y] && SOUND [=y] && !UML && SND [=y] && SND_SOC [=y] && SND_SOC_SOF_TOPLEVEL [=y] && (ACPI [=y] || COMPILE_TEST [=n]) && X86 [=y]

Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Liam Girdwood <lgirdwood@gmail.com>
Cc: Mark Brown <broonie@kernel.org>
Cc: alsa-devel@alsa-project.org
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

Change trace level to debug to avoid spurious messages.
Return quietly when accessing iec958 control, while no
S/PDIF signal is available.

Signed-off-by: Olivier Moysan <olivier.moysan@st.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

- Set period minimum size. Ensure at least 5ms period
up to 48kHz/16 bits to prevent underrun/overrun.
- Remove MDMA constraints on period maximum size and
set period maximum to half the buffer maximum size.

Signed-off-by: Olivier Moysan <olivier.moysan@st.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

The max98090 driver defines 3 DAPM muxes; one for the right line output
(LINMOD Mux), one for the left headphone mixer source (MIXHPLSEL Mux)
and one for the right headphone mixer source (MIXHPRSEL Mux). The same
bit is used for the mux as well as the DAPM enable, and although the mux
can be correctly configured, after playback has completed, the mux will
be reset during the disable phase. This is preventing the state of these
muxes from being saved and restored correctly on system reboot. Fix this
by marking these muxes as SND_SOC_NOPM.

Note this has been verified this on the Tegra124 Nyan Big which features
the MAX98090 codec.

Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Cc: stable@vger.kernel.org

The current algorithm allows 3 types of transfers, 16bit, 32bit and
burst. According to Realtek, 16bit transfers have a special restriction
in that it is restricted to the memory region of
0x18020000 ~ 0x18021000. This region is the memory location of the I2C
registers. The current algorithm does not uphold this restriction and
therefore fails to complete writes.

Since this has been broken for some time it likely no one is using it.
Better to simply disable the 16 bit writes. This will allow users to
properly load firmware over SPI without data corruption.

Signed-off-by: Curtis Malainey <cujomalainey@chromium.org>
Reviewed-by: Ben Zhang <benzh@chromium.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
Cc: stable@vger.kernel.org

For Spreadtrum audio platform driver, it need allocate a larger DMA buffer
dynamically to copy audio data between userspace and kernel space, but that
will increase the risk of memory allocation failure especially the system
is under heavy load situation.

To make sure the audio can work in this scenario, we usually reserve one
region of memory to be used as a shared pool of DMA buffers for the
platform component. So add of_reserved_mem_device_init_by_idx() function
to initialize the shared pool of DMA buffers to be used by the platform
component.

Signed-off-by: Baolin Wang <baolin.wang@linaro.org>
Signed-off-by: Mark Brown <broonie@kernel.org>

On kbl_rt5663_max98927, commit 38a5882e
    ("ASoC: Intel: kbl_rt5663_max98927: Map BTN_0 to KEY_PLAYPAUSE")
    This key pair mapping to play/pause when playing Youtube

The Android 3.5mm Headset jack specification mentions that BTN_0 should
be mapped to KEY_MEDIA, but this is less logical than KEY_PLAYPAUSE,
which has much broader userspace support.

For example, the Chrome OS userspace now supports KEY_PLAYPAUSE to toggle
play/pause of videos and audio, but does not handle KEY_MEDIA.

Furthermore, Android itself now supports KEY_PLAYPAUSE equivalently, as the
new USB headset spec requires KEY_PLAYPAUSE for BTN_0.
https://source.android.com/devices/accessories/headset/usb-headset-spec



The same fix is required on Chrome kbl_da7219_max98357a.

Signed-off-by: Mac Chiang <mac.chiang@intel.com>
Reviewed-by: Benson Leung <bleung@chromium.org>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

The machine driver is a generic machine driver for SOF with rt5682
codec. it currently supports BYT/CHT/ICL/CML. Depending on the SOC
hdmi/speaker and DMIC support are added dynamically.

Only add information related to SOF since the machine driver was
only tested with SOF.

Signed-off-by: Sathya Prakash M R <sathya.prakash.m.r@intel.com>
Signed-off-by: Bard liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

Semicolon is better than comma.

Signed-off-by: Rander Wang <rander.wang@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

Add dmic dai links using naming conventions used in
previous machine drivers.

Tested on whiskylake & icelake with SOF driver. Due
to a missing topology file, the DMIC functionality
could not be tested with the Skylake driver but was
tested for non-regressions on a GeminiLake platform
without DMICs.

Signed-off-by: Rander Wang <rander.wang@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

Add ipc dump function to CNL+ platforms.

Signed-off-by: Pan Xiuli <xiuli.pan@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

Add IPC dump function for APL plaform

Signed-off-by: Pan Xiuli <xiuli.pan@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

Dump IPC status when IPC timed out. IPC status is platform specific and
need bind to plaform.

Signed-off-by: Pan Xiuli <xiuli.pan@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

The prepare() ioctl for BE dai link gets called both
when the stream is started and when it is resumed from
suspend. SOF uses this ioctl to set the hw params
again only if the stream has been suspended.

When the stream is started, the hw_params ioctl gets called
before prepare() and hw_params is set for the BE dai link.
So the prepare call does not need to do anything further.

When the stream resumes after system suspend, SOF requires
that the hw_params be set again for the BE dai. In order
to determine which streams should set the hw params
during prepare(), an internal flag called "hw_params_upon_resume"
is introduced in struct sof_intel_hda_stream. The flag is set
for hda streams when the sof device suspends and is
cleared after hw_params is set.

Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

The stream and IPC share the same interrupt. The stream interrupt
handler mistakenly uses the ipc interrupt and return IRQ_HANDLED,
causing the ipc interrupt to be missed.

Make sure the stream interrupt handler only deals with stream-related
interrupts.

Signed-off-by: Keyon Jie <yang.jie@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

Add stream_max into struct sof_intel_hda_dev to store the total hda
stream number that the platform can support, and initialize it at
stream_init.

This can be used later e.g. for stream bitmask.

Signed-off-by: Keyon Jie <yang.jie@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

When using a shared IRQ between IPC interrupt and stream IOC interrupt,
the interrupt handlers need to check the interrupt source before
scheduling their respective IRQ threads. In the case of IPC handler, it
should check if it is an IPC interrupt before waking up the IPC IRQ
thread.

The IPC IRQ thread, once scheduled, does not need to check the IRQ
source again. So, remove the superfluous check in the thread. Remove the
irq_status field from snd_sof_dev struct also as it is no longer needed.

Signed-off-by: Keyon Jie <yang.jie@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

Switch to a wrapper function which schedules the actual call of
snd_pcm_period_elapsed after the current IPC is completed.

Signed-off-by: Keyon Jie <yang.jie@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

Switch to a wrapper function which schedules the actual call of
snd_pcm_period_elapsed after the current IPC is completed.

Signed-off-by: Keyon Jie <yang.jie@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

The IPC implementation in SOF requires sending IPCs serially: we should
not send a new IPC command to the firmware before we get an ACK (or time
out) from firmware, and the IRQ processing is complete.

snd_pcm_period_elapsed() can be called in interrupt context before
IRQ_HANDLED is returned. When the PCM is done draining, a STOP
IPC will then be sent, which breaks the expectation that IPCs are
handled serially and leads to IPC timeouts.

This patch adds a workqueue to defer the call to snd_pcm_elapsed() after
the IRQ is handled.

Signed-off-by: Keyon Jie <yang.jie@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

Nothing depends on definitions in hdaudio_ext.h, don't include it

Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

Setting the bus->idx as 0, for we only have one HDA
bus atm. This need to be fixed when there are more
than one HDA bus.

Signed-off-by: Zhu Yingjiang <yingjiang.zhu@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

By default, the I2S ports are configured in master mode during
DSP powerup sequences, the FS and BCLK lines will be driven on
startup, even when the topology file explicitly requires the
SSP to be slave.

This may be problematic for external components configured in
master mode who don't expect the Intel SOC/PCH to drive. Fix by
configuring the SSP as slave before the SSP outputs are enabled
to avoid this transient behavior.

When the topology file configures the SSP as clock master, the
initial slave configuration will be overridden.

Signed-off-by: Zhu Yingjiang <yingjiang.zhu@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

add SSP info of APL and CNL, to the sof_intel_dsp_desc
structure. The max SSP count the platform support and
the SSP base address.

Signed-off-by: Zhu Yingjiang <yingjiang.zhu@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

The DSP SSP device memory can be conditionally accessed by
the host(depending on access policy).

Add the SSP base memory offset of APL and CNL.

Signed-off-by: Zhu Yingjiang <yingjiang.zhu@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

Add .pcm_pointer ops for cannonlake to read DPIB/posbuf and get pointer
for ALSA, to align with apollolake.

Signed-off-by: Keyon Jie <yang.jie@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

Fail early if topology is more recent than kernel and Kconfig is
selected.

Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

Fail early if firmware is more recent than kernel and Kconfig is
selected.

Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

When the kernel is more recent than firmware files, it will always
behave in backwards-compatible ways.

Add optional behavior to check if the kernel is older than the
firmware files, so that the kernel fails early instead of attempting
to use new functionality it does not support.

Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

Currently in sst_dsp_new() if we get an error return from sst_dma_new()
we just print an error message and then still complete the function
successfully.  This means that we are trying to run without sst->dma
properly set up, which will result in NULL pointer dereference when
sst->dma is later used.  This was happening for me in
sst_dsp_dma_get_channel():

        struct sst_dma *dma = dsp->dma;
	...
        dma->ch = dma_request_channel(mask, dma_chan_filter, dsp);

This resulted in:

   BUG: unable to handle kernel NULL pointer dereference at 0000000000000018
   IP: sst_dsp_dma_get_channel+0x4f/0x125 [snd_soc_sst_firmware]

Fix this by adding proper error handling for the case where we fail to
set up DMA.

This change only affects Haswell and Broadwell systems.  Baytrail
systems explicilty opt-out of DMA via sst->pdata->resindex_dma_base
being set to -1.

Signed-off-by: Ross Zwisler <zwisler@google.com>
Cc: stable@vger.kernel.org
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

startup() should have run before hw_params() is called, so the
current_substream pointer should already be properly set. There
is no reason to call hdmi_codec_new_stream() again in the
hw_params() callback

Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

Currently there are two null checks of pointer dai in function
sof_connect_dai_widget and yet there is no null check of dai
at the end of the function when checking !dai->name.  The latter
would be a null pointer deference if dai is null (as picked up
by static analysis), however the function is only ever called
when dai is successfully allocated, so the null checks are
redundant. Clean up the code by removing the null checks.

Addresses-Coverity: ("Dereference after null check")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

For some platforms where DA7219 is the DAI clock master, BCLK/WCLK
will be set and enabled prior to the codec's hw_params() function
being called. It is possible the platform requires a different
BCLK configuration than would be chosen by hw_params(), for
example S16_LE format needed with a 64-bit frame to satisfy certain
devices using the clocks.

To handle those kinds of scenarios, the use of clk_round_rate() is
now employed as part of hw_params(). If BCLK is already enabled
then this function will just return the currently set rate, if it
is valid for the desired frame size, so the subsequent call to
clk_set_rate() will succeed and nothing changes with regards to
clocking. In addition the specific BCLK & WCLK recalc_rate()
implementations needed updating to always give back a real value,
as those functions are called as part of the clk init code and a
real value is needed for the clk_round_rate() call to work as
expected.

Signed-off-by: Adam Thomson <Adam.Thomson.Opensource@diasemi.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

The LattePanda board has a sound card chtrt5645, when there is nothing
plugged in the headphone jack, the system thinks the headphone is
plugged in, while we plug a headphone in the jack, the system thinks
the headphone is unplugged.

If adding quirk=0x21 in the module parameter, the headphone jack can
work well. So let us fix it via platform_data.

https://bugs.launchpad.net/bugs/182459


Signed-off-by: Hui Wang <hui.wang@canonical.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

case ESAI_HCKT_EXTAL and case ESAI_HCKR_EXTAL should be
independent of each other, so replace fall-through with break.

Fixes: 43d24e76

 ("ASoC: fsl_esai: Add ESAI CPU DAI driver")
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Acked-by: Nicolin Chen <nicoleotsuka@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Mark Brown <broonie@kernel.org>

Due to a typo the wrong base is being supplied for the primary algorithm
on Halo firmwares, which will cause the controls to not function.

Fixes: 170b1e12

 ("ASoC: wm_adsp: Add support for new Halo core DSPs")
Reported-by: Stuart Henderson <stuarth@opensource.cirrus.com>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Mark Brown <broonie@kernel.org>