Currently sctp allows for the optional use of md5 of sha1 hmac algorithms to
generate cookie values when establishing new connections via two build time
config options.  Theres no real reason to make this a static selection.  We can
add a sysctl that allows for the dynamic selection of these algorithms at run
time, with the default value determined by the corresponding crypto library
availability.
This comes in handy when, for example running a system in FIPS mode, where use
of md5 is disallowed, but SHA1 is permitted.

Note: This new sysctl has no corresponding socket option to select the cookie
hmac algorithm.  I chose not to implement that intentionally, as RFC 6458
contains no option for this value, and I opted not to pollute the socket option
namespace.

Change notes:
v2)
	* Updated subject to have the proper sctp prefix as per Dave M.
	* Replaced deafult selection options with new options that allow
	  developers to explicitly select available hmac algs at build time
	  as per suggestion by Vlad Y.

Signed-off-by: Neil Horman <nhorman@tuxdriver.com>
CC: Vlad Yasevich <vyasevich@gmail.com>
CC: "David S. Miller" <davem@davemloft.net>
CC: netdev@vger.kernel.org
Acked-by: Vlad Yasevich <vyasevich@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This tiny patch removes two unused err assignments. In those two cases the
err variable is either overwritten with another value at a later point in
time without having read the previous assigment, or it is assigned and the
function returns without using/reading err after the assignment.

Signed-off-by: Daniel Borkmann <daniel.borkmann@tik.ee.ethz.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

Enable ALDPS function to save power when link down. Note that the
feature should be set after the other PHY settings. And the firmware
is necessary. Don't enable it without loading the firmware.

None of the firmware-free chipsets support ALDPS. Neither do the
RTL8168d/8111d.

For 8136 series, make sure the ALDPS is disabled before loading the
firmware. For 8168 series, the ALDPS would be disabled automatically
when loading firmware. You must not disable it directly.

Signed-off-by: Hayes Wang <hayeswang@realtek.com>
Acked-by: Francois Romieu <romieu@fr.zoreil.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Make it simple -- just put new nlattr with just sk->sk_shutdown bits.

Signed-off-by: Pavel Emelyanov <xemul@parallels.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Adding by commit 51ebd318

 which adds the support of ECMP for IPv6.

Spotted-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

FW flashing code, even though it works correctly, makes some hidden
assumptions about buffer sizes. This is causing code analysers to
report error. Cleanup FW flashing code to remove these hidden assumptions.

Reported-by: Yuanhan Liu <yuanhan.liu@intel.com>
Signed-off-by: Vasundhara Volam <vasundhara.volam@emulex.com>
Signed-off-by: Sathya Perla <sathya.perla@emulex.com>
Signed-off-by: Padmanabh Ratnakar <padmanabh.ratnakar@emulex.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

It's no needed to check the return value of tab since the NULL situation
has been handled already, and the rtnl_msg_handlers[PF_UNSPEC] has been
initialized as non-NULL during the rtnetlink_init().

Signed-off-by: Hans Zhang <zhanghonghui@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Use same header helpers than tcp_v6_early_demux() because they
are a bit faster, and as they make IPv4/IPv6 versions look
the same.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Neal Cardwell <ncardwell@google.com>
Acked-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Remove an icsk variable, which by convention should refer to an
inet_connection_sock rather than an inet_sock. In the process, make
the tcp_v6_early_demux() code and formatting a bit more like
tcp_v4_early_demux(), to ease comparisons and maintenance.

Signed-off-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Signed-off-by: Greg Rose <gregory.v.rose@intel.com>
Tested-by: Sibai Li <sibai.li@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

The lockdep splat below identifies a case where irq safe to unsafe
lock order is detected. Resolved by making mbx_lock bh.

======================================================
[ INFO: SOFTIRQ-safe -> SOFTIRQ-unsafe lock order detected ]
3.6.0-rc5jk-net-next+ #119 Not tainted
------------------------------------------------------
ip/2608 [HC0[0]:SC0[2]:HE1:SE0] is trying to acquire:
 (&(&adapter->mbx_lock)->rlock){+.+...}, at: [<ffffffffa008114e>] ixgbevf_set_rx_mode+0x36/0xd2 [ixgbevf]

and this task is already holding:
 (_xmit_ETHER){+.....}, at: [<ffffffff814097c8>] dev_set_rx_mode+0x1e/0x33
which would create a new lock dependency:
 (_xmit_ETHER){+.....} -> (&(&adapter->mbx_lock)->rlock){+.+...}

but this new dependency connects a SOFTIRQ-irq-safe lock:
 (&(&mc->mca_lock)->rlock){+.-...}
... which became SOFTIRQ-irq-safe at:
  [<ffffffff81092ee5>] __lock_acquire+0x2f2/0xdf3
  [<ffffffff81093b11>] lock_acquire+0x12b/0x158
  [<ffffffff814bdbcd>] _raw_spin_lock_bh+0x4a/0x7d
  [<ffffffffa011a740>] mld_ifc_timer_expire+0x1b2/0x282 [ipv6]
  [<ffffffff81054580>] run_timer_softirq+0x2a2/0x3ee
  [<ffffffff8104cc42>] __do_softirq+0x161/0x2b9
  [<ffffffff814c6a7c>] call_softirq+0x1c/0x30
  [<ffffffff81011bc7>] do_softirq+0x4b/0xa3
  [<ffffffff8104c8d5>] irq_exit+0x53/0xd7
  [<ffffffff814c734d>] do_IRQ+0x9d/0xb4
  [<ffffffff814be56f>] ret_from_intr+0x0/0x1a
  [<ffffffff813de21c>] cpuidle_enter+0x12/0x14
  [<ffffffff813de235>] cpuidle_enter_state+0x17/0x3f
  [<ffffffff813deb6c>] cpuidle_idle_call+0x140/0x21c
  [<ffffffff8101764c>] cpu_idle+0x79/0xcd
  [<ffffffff814a59f5>] rest_init+0x149/0x150
  [<ffffffff81ca2cbc>] start_kernel+0x37c/0x389
  [<ffffffff81ca22dd>] x86_64_start_reservations+0xb8/0xbd
  [<ffffffff81ca23e3>] x86_64_start_kernel+0x101/0x110

to a SOFTIRQ-irq-unsafe lock:
 (&(&adapter->mbx_lock)->rlock){+.+...}
... which became SOFTIRQ-irq-unsafe at:
...  [<ffffffff81092f59>] __lock_acquire+0x366/0xdf3
  [<ffffffff81093b11>] lock_acquire+0x12b/0x158
  [<ffffffff814bd862>] _raw_spin_lock+0x45/0x7a
  [<ffffffffa0080fde>] ixgbevf_negotiate_api+0x3d/0x6d [ixgbevf]
  [<ffffffffa008404b>] ixgbevf_open+0x6c/0x43e [ixgbevf]
  [<ffffffff8140b2c1>] __dev_open+0xa0/0xe6
  [<ffffffff814099b6>] __dev_change_flags+0xbe/0x142
  [<ffffffff8140b1eb>] dev_change_flags+0x21/0x57
  [<ffffffff8141a523>] do_setlink+0x2e2/0x7f4
  [<ffffffff8141ad8c>] rtnl_newlink+0x277/0x4bb
  [<ffffffff81419c08>] rtnetlink_rcv_msg+0x236/0x253
  [<ffffffff8142f92d>] netlink_rcv_skb+0x43/0x94
  [<ffffffff814199cb>] rtnetlink_rcv+0x26/0x2d
  [<ffffffff8142f6dc>] netlink_unicast+0xee/0x174
  [<ffffffff8142ff12>] netlink_sendmsg+0x26a/0x288
  [<ffffffff813f5a0d>] __sock_sendmsg_nosec+0x58/0x61
  [<ffffffff813f7d57>] __sock_sendmsg+0x3d/0x48
  [<ffffffff813f7ed9>] sock_sendmsg+0x6e/0x87
  [<ffffffff813f93d4>] __sys_sendmsg+0x206/0x288
  [<ffffffff813f95ce>] sys_sendmsg+0x42/0x60
  [<ffffffff814c57a9>] system_call_fastpath+0x16/0x1b

other info that might help us debug this:

Chain exists of:
  &(&mc->mca_lock)->rlock --> _xmit_ETHER --> &(&adapter->mbx_lock)->rlock

 Possible interrupt unsafe locking scenario:

       CPU0                    CPU1
       ----                    ----
  lock(&(&adapter->mbx_lock)->rlock);
                               local_irq_disable();
                               lock(&(&mc->mca_lock)->rlock);
                               lock(_xmit_ETHER);
  <Interrupt>
    lock(&(&mc->mca_lock)->rlock);

 *** DEADLOCK ***

Signed-off-by: John Fastabend <john.r.fastabend@intel.com>
Acked-by: Greg Rose <gregory.v.rose@intel.com>
Tested-by: Sibai Li <sibai.li@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

Ignoring the return value from a call to the kernel dma_map API functions
can cause data corruption and system instability.  Check the return value
and take appropriate action.

Signed-off-by: Greg Rose <gregory.v.rose@intel.com>
Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com>
Tested-by: Sibai Li <sibai.li@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

ixgbevf_alloc_q_vectors() calls netif_napi_add for each qvector
where qvectors is determined by the number of msix vectors. This
makes perfect sense.

However on cleanup when ixgbevf_free_q_vectors() is called and
for each qvector we should call netif_napi_del there is some
extra logic to add a dependency on RX queues. This patch makes
the add/del operations symmetric by removing the RX queues
dependency.

Without this if  free_netdev() is called we see the general
protection fault below in netif_napi_del when list_del_init()
is called.

# addr2line -e ./vmlinux ffffffff8140810c
net-next/include/linux/list.h:88

general protection fault: 0000 [#1] SMP
Modules linked in: bonding ixgbevf ixgbe(-) mdio libfc scsi_transport_fc scsi_tgt 8021q garp stp llc cpufreq_ondemand acpi_cpufreq freq_table mperf ipv6 uinput coretemp lpc_ich i2c_i801 shpchp hwmon i2c_core serio_raw crc32c_intel mfd_core joydev pcspkr microcode ioatdma igb dca pata_acpi ata_generic usb_storage pata_jmicron [last unloaded: bonding]
CPU 10
Pid: 4174, comm: rmmod Tainted: G        W    3.6.0-rc3jk-net-next+ #104 Supermicro X8DTN/X8DTN
RIP: 0010:[<ffffffff8140810c>]  [<ffffffff8140810c>] netif_napi_del+0x24/0x87
RSP: 0018:ffff88027f5e9b48  EFLAGS: 00010293
RAX: ffff8806224b4768 RBX: ffff8806224b46e8 RCX: 6b6b6b6b6b6b6b6b
RDX: 6b6b6b6b6b6b6b6b RSI: ffffffff810bf6c5 RDI: ffff8806224b46e8
RBP: ffff88027f5e9b58 R08: ffff88033200b180 R09: ffff88027f5e98a8
R10: ffff88033320b000 R11: ffff88027f5e9ae8 R12: 6b6b6b6b6b6b6aeb
R13: ffff8806221d11c0 R14: 0000000000000000 R15: ffff88027f5e9cf8
FS:  00007f5e58b9b700(0000) GS:ffff880333200000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 000000008005003b
CR2: 00000000010ef2b8 CR3: 0000000281fff000 CR4: 00000000000007e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
Process rmmod (pid: 4174, threadinfo ffff88027f5e8000, task ffff88032f888000)
Stack:
 ffff8806221d1160 6b6b6b6b6b6b6aeb ffff88027f5e9b88 ffffffff81408e46
 ffff8806221d1160 ffff8806221d1160 ffff8806221d1ae0 ffff8806221d5668
 ffff88027f5e9bb8 ffffffffa009153c ffffffffa0092a30 ffff8806221d5700
Call Trace:
 [<ffffffff81408e46>] free_netdev+0x64/0xd7
 [<ffffffffa009153c>] ixgbevf_remove+0xa6/0xbc [ixgbevf]
 [<ffffffff8127a7a1>] pci_device_remove+0x2d/0x51
 [<ffffffff8131f503>] __device_release_driver+0x6c/0xc2
 [<ffffffff8131f640>] device_release_driver+0x25/0x32
 [<ffffffff8131e821>] bus_remove_device+0x148/0x15d
 [<ffffffff8131cb6b>] device_del+0x130/0x1a4
 [<ffffffff8131cc2a>] device_unregister+0x4b/0x57
 [<ffffffff81275c27>] pci_stop_bus_device+0x63/0x85
 [...]

Signed-off-by: John Fastabend <john.r.fastabend@intel.com>
Acked-by: Greg Rose <gregory.v.rose@intel.com>
Acked-by: Alexander Duyck <alexander.h.duyck@intel.com>
Tested-by: Sibai Li <sibai.li@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

This patch updates the igb driver version to 4.0.17.

Signed-off-by: Carolyn Wyborny <carolyn.wyborny@intel.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

There was a problem in the initial implementation of the get cable length
function for i210 and it did not work properly.  This patch fixes that
problem for i210/i211 devices.

Signed-off-by: Carolyn Wyborny <carolyn.wyborny@intel.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

Add an official link which is designed to guide the user to the appropriate
support resource (be it community, OEM, Intel phone, Intel email, etc)

Add the current e1000 maintainer to the list of Intel maintainers.

Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

This is a HW requirement. Although a buffer as short as 1 byte is allowed,
the total length of packet before, padding and CRC insertion, must be at
least 17 bytes.  So pad all small packets manually up to 17 bytes before
delivering them to HW.

Signed-off-by: Tushar Dave <tushar.n.dave@intel.com>
Tested-by: Jeff Pieper <jeffrey.e.pieper@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

Jeff Kirsher says:

====================
This series contains updates to ixgbe only.  Only change to this series
is I dropped the "ixgbe: Add support for pipeline reset" due to
change requested by Martin Josefsson.

Alexander Duyck (7):
  ixgbe: Add support for IPv6 and UDP to ixgbe_get_headlen
  ixgbe: Add support for tracking the default user priority to SR-IOV
  ixgbe: Add support for GET_QUEUES message to get DCB configuration
  ixgbe: Enable support for VF API version 1.1 in the PF.
  ixgbevf: Add VF DCB + SR-IOV support
  ixgbe: Drop unnecessary addition from ixgbe_set_rx_buffer_len
  ixgbe: Fix possible memory leak in ixgbe_set_ringparam

Don Skidmore (1):
  ixgbe: Add function ixgbe_reset_pipeline_82599

Emil Tantilov (1):
  ixgbe: add WOL support for new subdevice id

Jacob Keller (1):
  ixgbe: (PTP) refactor init, cyclecounter and reset

Tushar Dave (1):
  ixgbe: Correcting small packet padding

Wei Yongjun (1):
  ixgbe: using is_zero_ether_addr() to simplify the code
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

MBIM devices can support up to 256 generic streams called
Device Service Streams (DSS). The MBIM spec says

   The format of the Device Service Stream payload depends
   on the device service (as identified by the corresponding
   UUID) that is used when opening the data stream.

Example use cases are serial AT command interfaces and NMEA
data streams. We cannot make any assumptions about these
device services.

Adding support for Device Service Stream by extending
the MBIM session to VLAN mapping scheme, allocating
VLAN IDs 256 to 511 for DSS, using the DSS SessionID
as the lower 8bit of the VLAN ID.

Using a netdev for DSS keeps the device framing intact and
allows userspace to do whatever it want with the streams.
For example, exporting an AT command interface using DSS
session #0 to a PTY for use with a terminal application like
minicom:

  vconfig add wwan0 256
  ip link set dev wwan0 up
  ip link set dev wwan0.256 up
  socat INTERFACE:wwan0.256,type=2 PTY:,echo=0,link=/tmp/modem

Device configuration must be done using MBIM control commands
over the /dev/cdc-wdmx device. The userspace management
application should coordinate host VLAN configuration and the
device MBIM configuration using the device capabilities to
find out if it needs to set up PTY mappings etc.

Signed-off-by: Bjørn Mork <bjorn@mork.no>
Signed-off-by: David S. Miller <davem@davemloft.net>

MBIM devices can support up to 256 independent IP Streams.
The main network device will only handle SessionID 0. Mapping
SessionIDs 1 to 255 to VLANs using the SessionID as VLAN ID
allow userspace to use these streams with traditional tools
like vconfig.

Signed-off-by: Bjørn Mork <bjorn@mork.no>
Signed-off-by: David S. Miller <davem@davemloft.net>

The MBIM specification allows a MBIM device to disguise
itself as NCM for backwards compatibility, using additional
altsettings with different subclass (control) or protocol
(data):

C:* #Ifs= 2 Cfg#= 1 Atr=80 MxPwr=100mA
I:  If#= 0 Alt= 0 #EPs= 1 Cls=02(comm.) Sub=0d Prot=00 Driver=cdc_mbim
E:  Ad=81(I) Atr=03(Int.) MxPS=  64 Ivl=7ms
I:* If#= 0 Alt= 1 #EPs= 1 Cls=02(comm.) Sub=0e Prot=00 Driver=cdc_mbim
E:  Ad=81(I) Atr=03(Int.) MxPS=  64 Ivl=7ms
I:  If#= 1 Alt= 0 #EPs= 0 Cls=0a(data ) Sub=00 Prot=01 Driver=cdc_mbim
I:  If#= 1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=01 Driver=cdc_mbim
E:  Ad=81(I) Atr=02(Bulk) MxPS=  64 Ivl=0ms
E:  Ad=02(O) Atr=02(Bulk) MxPS=  64 Ivl=0ms
I:* If#= 1 Alt= 2 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim
E:  Ad=81(I) Atr=02(Bulk) MxPS=  64 Ivl=0ms
E:  Ad=02(O) Atr=02(Bulk) MxPS=  64 Ivl=0ms

If the MBIM driver is enabled then that should have priority
for devices providing such a NCM 1.0 backward compatibility
mode.

Signed-off-by: Bjørn Mork <bjorn@mork.no>
Signed-off-by: Greg Suarez <gsuarez@smithmicro.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Signed-off-by: Bjørn Mork <bjorn@mork.no>
Signed-off-by: David S. Miller <davem@davemloft.net>

The CDC Mobile Broadband Interface Model (MBIM) specification
extends CDC NCM by
 - removing the redundant ethernet header from the point-to-point
   USB channel
 - adding support for multiple IP (v4 and/or v6) sessions multiplexed
   on the same USB channel
 - adding a MBIM control channel encapsulated in CDC
 - adding Device Service Streams (DSS), which are non IP generic data
   streams multiplexed on the same USB channel as the IP sessions

MBIM devices are managed using the dedicated control channel, and no
data will flow on the data channel until a control session has been
established.  This driver has no knowledge of MBIM control messages.
It just exports the control channel to a /dev/cdc-wdmX character
device for userspace management applications. Such an application is
therefore required to use this driver.

This patch implements basic MBIM support, reusing the NCM and WDM driver
APIs, currently limited to IP sessions with SessionID 0. DSS and
multiplexed IP sessions are not yet supported.

Signed-off-by: Greg Suarez <gsuarez@smithmicro.com>
Signed-off-by: Bjørn Mork <bjorn@mork.no>
Signed-off-by: David S. Miller <davem@davemloft.net>

Move symbols and definitons which can be shared with a
MBIM driver in a new header.

Signed-off-by: Bjørn Mork <bjorn@mork.no>
Signed-off-by: David S. Miller <davem@davemloft.net>

Adding multiplexed NDP support to cdc_ncm_fill_tx_frame, allowing
transmissions of multiple independent sessions within the same NTB.

Refactoring the code quite a bit to avoid having to store copies
of multiple NDPs being prepared for tx. The old code would still
reserve enough room for a maximum sized NDP in the skb so we might
as well keep them in the skb while they are being prepared.

Signed-off-by: Bjørn Mork <bjorn@mork.no>
Signed-off-by: David S. Miller <davem@davemloft.net>

Verifying and handling received MBIM and NCM frames will need
to be different in three areas:
 - verifying the NDP signature
 - checking valid datagram length
 - datagram header manipulation

This makes it inconvenient to share rx_fixup in whole.  But
some verification parts are common.  Split these out in separate
functions.

Signed-off-by: Bjørn Mork <bjorn@mork.no>
Signed-off-by: David S. Miller <davem@davemloft.net>

The NCM 1.0 spefication makes provisions for linking more than
one NDP into a single NTB. This is important for MBIM support,
where these NDPs might be of different types.

Following the chain of NDPs is also correct for NCM, and will
not change anything in the common case where there is only
one NDP

Signed-off-by: Bjørn Mork <bjorn@mork.no>
Signed-off-by: David S. Miller <davem@davemloft.net>

NCM and MBIM can share most of the bind function.  Split
out the shareable part and add MBIM functional descriptor
parsing.

Signed-off-by: Greg Suarez <gsuarez@smithmicro.com>
Signed-off-by: Bjørn Mork <bjorn@mork.no>
Signed-off-by: David S. Miller <davem@davemloft.net>

MBIM and NCM are very similar, so we can reuse most of the
setup and bind logic in cdc_ncm for CDC MBIM devices.  Handle
a few minor differences in ncm_setup.

Signed-off-by: Greg Suarez <gsuarez@smithmicro.com>
Signed-off-by: Bjørn Mork <bjorn@mork.no>
Signed-off-by: David S. Miller <davem@davemloft.net>

Based on revision 1.0 of "Universal Serial Bus Communications
Class Subclass Specification for Mobile Broadband Interface
Model" available from www.usb.org

Signed-off-by: Greg Suarez <gsuarez@smithmicro.com>
[bmork: added DSS defines]
Signed-off-by: Bjørn Mork <bjorn@mork.no>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Some devices do not support the 8 byte variants of the NTB input
size control messages despite announcing such support in their
NCM or MBIM functional descriptor.

According to the NCM specification, all devices must support the
4 byte variant regardless of whether or not the flag is set:

  If bit D5 is set in the bmNetworkCapabilities field of
  function’s NCM Functional Descriptor, the host may
  set wLength either to 4 or to 8. If wLength is 4, the
  function shall assume that wNtbInMaxDatagrams is to be
  set to zero. If wLength is 8, then the function shall
  use the provided value as the limit. The function shall
  return an error response (a STALL PID) if wLength is set
  to any other value.

We do not set wNtbInMaxDatagrams in any case, so we can just as
well unconditionally use the 4 byte variant without losing any
functionality.  This works around the known firmware bug, and
simplifies the code considerably.

Signed-off-by: Bjørn Mork <bjorn@mork.no>
Signed-off-by: David S. Miller <davem@davemloft.net>

This will allow us to remove the last mach include from at91_ether
and also make it easier to share address setup with macb.

Signed-off-by: Joachim Eastwood <manabian@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Now that HAVE_NET_MACB is gone let's just select MACB to
satisfy the dependecies in at91_ether.

Signed-off-by: Joachim Eastwood <manabian@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

macb is a platform driver and there is nothing that prevents
this driver from being built on non-ARM/AVR32 platforms.

Signed-off-by: Joachim Eastwood <manabian@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

When building macb on x86_64 the following warnings show up:
  drivers/net/ethernet/cadence/macb.c: In function macb_interrupt:
  drivers/net/ethernet/cadence/macb.c:556:4: warning: large integer implicitly truncated to unsigned type [-Woverflow]
  drivers/net/ethernet/cadence/macb.c: In function macb_reset_hw:
  drivers/net/ethernet/cadence/macb.c:792:2: warning: large integer implicitly truncated to unsigned type [-Woverflow]
  drivers/net/ethernet/cadence/macb.c:793:2: warning: large integer implicitly truncated to unsigned type [-Woverflow]
  drivers/net/ethernet/cadence/macb.c:796:2: warning: large integer implicitly truncated to unsigned type [-Woverflow]

Use -1 insted of ~0UL, as done in other places in the driver,
to silence these warnings.

Signed-off-by: Joachim Eastwood <manabian@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Each nexthop is added like a single route in the routing table. All routes
that have the same metric/weight and destination but not the same gateway
are considering as ECMP routes. They are linked together, through a list called
rt6i_siblings.

ECMP routes can be added in one shot, with RTA_MULTIPATH attribute or one after
the other (in both case, the flag NLM_F_EXCL should not be set).

The patch is based on a previous work from
Luc Saillard <luc.saillard@6wind.com>.

Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

We were not correctly freeing the temporary rings on error in
ixgbe_set_ring_param.  In order to correct this I am unwinding a number of
changes that were made in order to get things back to the original working
form with modification for the current ring layouts.

This approach has multiple advantages including a smaller memory footprint,
and the fact that the interface is stopped while we are allocating the rings
meaning that there is less potential for some sort of memory corruption on the
ring.

The only disadvantage I see with this approach is that on a Rx allocation
failure we will report an error and only update the Tx rings.  However the
adapter should be fully functional in this state and the likelihood of such
an error is very low.  In addition it is not unreasonable to expect the
user to need to recheck the ring configuration should they experience an
error setting the ring sizes.

Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

This patch adds a function that forces a full pipeline reset.  This
function will be used in following patches to completely reset the PHY
during resets.

Signed-off-by: Don Skidmore <donald.c.skidmore@intel.com>
Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

We still had some code floating around from the old single buffer receive
path.  As a result we were adding VLAN_HLEN to max_frame although the
resultant value was never used.  Since that is the case we can drop this from
the function.

Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>