- May 06, 2023
-
-
git://git.samba.org/ksmbdLinus Torvalds authored
Pull ksmbd server fixes from Steve French: "Ten ksmbd server fixes, including some important security fixes: - Two use after free fixes - Fix RCU callback race - Deadlock fix - Three patches to prevent session setup attacks - Prevent guest users from establishing multichannel sessions - Fix null pointer dereference in query FS info - Memleak fix" * tag '6.4-rc-ksmbd-server-fixes-part2' of git://git.samba.org/ksmbd: ksmbd: call rcu_barrier() in ksmbd_server_exit() ksmbd: fix racy issue under cocurrent smb2 tree disconnect ksmbd: fix racy issue from smb2 close and logoff with multichannel ksmbd: not allow guest user on multichannel ksmbd: fix deadlock in ksmbd_find_crypto_ctx() ksmbd: block asynchronous requests when making a delay on session setup ksmbd: destroy expired sessions ksmbd: fix racy issue from session setup and logoff ksmbd: fix NULL pointer dereference in smb2_get_info_filesystem() ksmbd: fix memleak in session setup
-
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netLinus Torvalds authored
Pull networking fixes from Jakub Kicinski: "Including fixes from netfilter. Current release - regressions: - sched: act_pedit: free pedit keys on bail from offset check Current release - new code bugs: - pds_core: - Kconfig fixes (DEBUGFS and AUXILIARY_BUS) - fix mutex double unlock in error path Previous releases - regressions: - sched: cls_api: remove block_cb from driver_list before freeing - nf_tables: fix ct untracked match breakage - eth: mtk_eth_soc: drop generic vlan rx offload - sched: flower: fix error handler on replace Previous releases - always broken: - tcp: fix skb_copy_ubufs() vs BIG TCP - ipv6: fix skb hash for some RST packets - af_packet: don't send zero-byte data in packet_sendmsg_spkt() - rxrpc: timeout handling fixes after moving client call connection to the I/O thread - ixgbe: fix panic during XDP_TX with > 64 CPUs - igc: RMW the SRRCTL register to prevent losing timestamp config - dsa: mt7530: fix corrupt frames using TRGMII on 40 MHz XTAL MT7621 - r8152: - fix flow control issue of RTL8156A - fix the poor throughput for 2.5G devices - move setting r8153b_rx_agg_chg_indicate() to fix coalescing - enable autosuspend - ncsi: clear Tx enable mode when handling a Config required AEN - octeontx2-pf: macsec: fixes for CN10KB ASIC rev Misc: - 9p: remove INET dependency" * tag 'net-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (69 commits) net: bcmgenet: Remove phy_stop() from bcmgenet_netif_stop() pds_core: fix mutex double unlock in error path net/sched: flower: fix error handler on replace Revert "net/sched: flower: Fix wrong handle assignment during filter change" net/sched: flower: fix filter idr initialization net: fec: correct the counting of XDP sent frames bonding: add xdp_features support net: enetc: check the index of the SFI rather than the handle sfc: Add back mailing list virtio_net: suppress cpu stall when free_unused_bufs ice: block LAN in case of VF to VF offload net: dsa: mt7530: fix network connectivity with multiple CPU ports net: dsa: mt7530: fix corrupt frames using trgmii on 40 MHz XTAL MT7621 9p: Remove INET dependency netfilter: nf_tables: fix ct untracked match breakage af_packet: Don't send zero-byte data in packet_sendmsg_spkt(). igc: read before write to SRRCTL register pds_core: add AUXILIARY_BUS and NET_DEVLINK to Kconfig pds_core: remove CONFIG_DEBUG_FS from makefile ionic: catch failure from devlink_alloc ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linuxLinus Torvalds authored
Pull more i2c updates from Wolfram Sang: "Some more driver bugfixes and a DT binding conversion" * tag 'i2c-for-6.4-rc1-part2' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: dt-bindings: i2c: brcm,kona-i2c: convert to YAML i2c: gxp: fix build failure without CONFIG_I2C_SLAVE i2c: imx-lpi2c: avoid taking clk_prepare mutex in PM callbacks i2c: omap: Fix standard mode false ACK readings i2c: tegra: Fix PEC support for SMBUS block read
-
Lukas Bulwahn authored
Commit 0da6e5fd ("gcc: disable '-Warray-bounds' for gcc-13 too") makes config GCC11_NO_ARRAY_BOUNDS to be for disabling -Warray-bounds in any gcc version 11 and upwards, and with that, removes the GCC12_NO_ARRAY_BOUNDS config as it is now covered by the semantics of GCC11_NO_ARRAY_BOUNDS. As GCC11_NO_ARRAY_BOUNDS is yes by default, there is no need for the s390 architecture to explicitly select GCC11_NO_ARRAY_BOUNDS. Hence, the select GCC12_NO_ARRAY_BOUNDS in arch/s390/Kconfig can simply be dropped. Remove the unneeded "select GCC12_NO_ARRAY_BOUNDS". Signed-off-by:
Lukas Bulwahn <lukas.bulwahn@gmail.com> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextJakub Kicinski authored
There's a fix which landed in net-next, pull it in along with the couple of minor cleanups. Signed-off-by:
Jakub Kicinski <kuba@kernel.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linuxLinus Torvalds authored
Pull devicetree fixes from Rob Herring: - Add Conor Dooley as a DT binding maintainer - Swap the order of parsing /memreserve/ and /reserved-memory nodes so that the /reserved-memory nodes which have more information are handled first - Fix some property dependencies in riscv,pmu binding - Update maintainers entries on a couple of bindings * tag 'devicetree-fixes-for-6.4-1' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: MAINTAINERS: add Conor as a dt-bindings maintainer dt-bindings: perf: riscv,pmu: fix property dependencies dt-bindings: xilinx: Remove Naga from memory and mtd bindings of: fdt: Scan /memreserve/ last dt-bindings: clock: r9a06g032-sysctrl: Change maintainer to Fabrizio Castro dt-bindings: pinctrl: renesas,rzv2m: Change maintainer to Fabrizio Castro dt-bindings: pinctrl: renesas,rzn1: Change maintainer to Fabrizio Castro dt-bindings: i2c: renesas,rzv2m: Change maintainer to Fabrizio Castro
-
git://git.lwn.net/linuxLinus Torvalds authored
Pull more documentation updates from Jonathan Corbet: "A handful of late-arriving documentation fixes, plus one Spanish translation that has been ready for some time but got applied late" * tag 'docs-6.4-2' of git://git.lwn.net/linux: docs/sp_SP: Add translation of process/adding-syscalls CREDITS: Update email address for Mat Martineau Documentation: update kernel stack for x86_64 docs: Remove unnecessary unicode character docs: fix "Reviewd" typo Documentation: timers: hrtimers: Make hybrid union historical docs/admin-guide/mm/ksm.rst fix intraface -> interface typo doc:it_IT: fix some typos
-
git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-traceLinus Torvalds authored
Pull more tracing updates from Steven Rostedt: - Make buffer_percent read/write. The buffer_percent file is how users can state how long to block on the tracing buffer depending on how much is in the buffer. When it hits the "buffer_percent" it will wake the task waiting on the buffer. For some reason it was set to read-only. This was not noticed because testing was done as root without SELinux, but with SELinux it will prevent even root to write to it without having CAP_DAC_OVERRIDE. - The "touched_functions" was added this merge window, but one of the reasons for adding it was not implemented. That was to show what functions were not only touched, but had either a direct trampoline attached to it, or a kprobe or live kernel patching that can "hijack" the function to run a different function. The point is to know if there's functions in the kernel that may not be behaving as the kernel code shows. This can be used for debugging. TODO: Add this information to kernel oops too. * tag 'trace-v6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace: ftrace: Add MODIFIED flag to show if IPMODIFY or direct was attached tracing: Fix permissions for the buffer_percent file
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull locking updates from Ingo Molnar: - Introduce local{,64}_try_cmpxchg() - a slightly more optimal primitive, which will be used in perf events ring-buffer code - Simplify/modify rwsems on PREEMPT_RT, to address writer starvation - Misc cleanups/fixes * tag 'locking-core-2023-05-05' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: locking/atomic: Correct (cmp)xchg() instrumentation locking/x86: Define arch_try_cmpxchg_local() locking/arch: Wire up local_try_cmpxchg() locking/generic: Wire up local{,64}_try_cmpxchg() locking/atomic: Add generic try_cmpxchg{,64}_local() support locking/rwbase: Mitigate indefinite writer starvation locking/arch: Rename all internal __xchg() names to __arch_xchg()
-
Linus Torvalds authored
Merge my x86 uaccess updates branch. The LAM ("Linear Address Masking") updates in this release made me unhappy about how "access_ok()" was done, and it actually turned out to have a couple of small bugs in it too. This is my cleanup of the code: - use the sign bit of the __user pointer rather than masking the address and checking it against the TASK_SIZE range. We already did this part for the get/put_user() side, but 'access_ok()' did the naïve "mask and range check" thing, which not only generates nasty code, but also ended up meaning that __access_ok itself didn't do a good job, and so copy_from_user_nmi() didn't get the check right. - move all the code that is 64-bit only into the 64-bit version of the header file, so that we don't unnecessarily pollute the shared x86 code and make it look like LAM might work in 32-bit too. - fix a bug in the address masking (that doesn't end up mattering: in this case the fix was to just remove the buggy code entirely). - a couple of trivial cleanups and added commentary about the access_ok() rules. * x86-uaccess-cleanup: x86-64: mm: clarify the 'positive addresses' user address rules x86: mm: remove 'sign' games from LAM untagged_addr*() macros x86: uaccess: move 32-bit and 64-bit parts into proper <asm/uaccess_N.h> header x86: mm: remove architecture-specific 'access_ok()' define x86-64: make access_ok() independent of LAM
-
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linuxLinus Torvalds authored
Pull more RISC-V updates from Palmer Dabbelt: - Support for hibernation - The .rela.dyn section has been moved to the init area - A fix for the SBI probing to allow for implementation-defined behavior - Various other fixes and cleanups throughout the tree * tag 'riscv-for-linus-6.4-mw2' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: RISC-V: include cpufeature.h in cpufeature.c riscv: Move .rela.dyn to the init sections dt-bindings: riscv: explicitly mention assumption of Zicsr & Zifencei support riscv: compat_syscall_table: Fixup compile warning RISC-V: fixup in-flight collision with ARCH_WANT_OPTIMIZE_VMEMMAP rename RISC-V: fix sifive and thead section mismatches in errata RISC-V: Align SBI probe implementation with spec riscv: mm: remove redundant parameter of create_fdt_early_page_table riscv: Adjust dependencies of HAVE_DYNAMIC_FTRACE selection RISC-V: Add arch functions to support hibernation/suspend-to-disk RISC-V: mm: Enable huge page support to kernel_page_present() function RISC-V: Factor out common code of __cpu_resume_enter() RISC-V: Change suspend_save_csrs and suspend_restore_csrs to public function
-
git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds authored
Pull more kvm updates from Paolo Bonzini: "This includes the 6.4 changes for RISC-V, and a few bugfix patches for other architectures. For x86, this closes a longstanding performance issue in the newer and (usually) more scalable page table management code. RISC-V: - ONE_REG interface to enable/disable SBI extensions - Zbb extension for Guest/VM - AIA CSR virtualization x86: - Fix a long-standing TDP MMU flaw, where unloading roots on a vCPU can result in the root being freed even though the root is completely valid and can be reused as-is (with a TLB flush). s390: - A couple of bugfixes" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: KVM: s390: fix race in gmap_make_secure() KVM: s390: pv: fix asynchronous teardown for small VMs KVM: x86: Preserve TDP MMU roots until they are explicitly invalidated RISC-V: KVM: Virtualize per-HART AIA CSRs RISC-V: KVM: Use bitmap for irqs_pending and irqs_pending_mask RISC-V: KVM: Add ONE_REG interface for AIA CSRs RISC-V: KVM: Implement subtype for CSR ONE_REG interface RISC-V: KVM: Initial skeletal support for AIA RISC-V: KVM: Drop the _MASK suffix from hgatp.VMID mask defines RISC-V: Detect AIA CSRs from ISA string RISC-V: Add AIA related CSR defines RISC-V: KVM: Allow Zbb extension for Guest/VM RISC-V: KVM: Add ONE_REG interface to enable/disable SBI extensions RISC-V: KVM: Alphabetize selects KVM: RISC-V: Retry fault if vma_lookup() results become invalid
-
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pmLinus Torvalds authored
Pull ACPI fix from Rafael Wysocki: "Remove an ACPI backlight quirk for Lenovo ThinkPad W530, added during the 6.3 cycle, that turned out to do more harm than help (Hans de Goede)" * tag 'acpi-6.4-rc1-3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: ACPI: video: Remove acpi_backlight=video quirk for Lenovo ThinkPad W530
-
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pmLinus Torvalds authored
Pull thermal control fixes from Rafael Wysocki: "These fix a NULL pointer dereference in the Intel powerclamp driver introduced during the 6.3 cycle and update MAINTAINERS to match recent code changes. Specifics: - Fix NULL pointer access in the Intel powerclamp thermal driver that occurs on attempts to set the cooling device state to 0 in the default configuration (Srinivas Pandruvada) - Drop the stale MAINTAINERS entry for the Intel Menlow thermal driver that has been removed recently (Lukas Bulwahn)" * tag 'thermal-6.4-rc1-3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: MAINTAINERS: remove section INTEL MENLOW THERMAL DRIVER thermal: intel: powerclamp: Fix NULL pointer access issue
-
git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phyLinus Torvalds authored
Pull phy fixes from Vinod Koul: - Fix for mediatek driver warning for variable used uninitialized and for wrong pll math * tag 'phy-fixes-6.4-1' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy: phy: mediatek: hdmi: mt8195: fix wrong pll calculus phy: mediatek: hdmi: mt8195: fix uninitialized variable usage in pll_calc
-
git://anongit.freedesktop.org/drm/drmLinus Torvalds authored
Pull more drm fixes from Dave Airlie: "This is the fixes for the last couple of weeks for i915 and last 3 weeks for amdgpu, lots of them but pretty scattered around and all pretty small. amdgpu: - SR-IOV fixes - DCN 3.2 fixes - DC mclk handling fixes - eDP fixes - SubVP fixes - HDCP regression fix - DSC fixes - DC FP fixes - DCN 3.x fixes - Display flickering fix when switching between vram and gtt - Z8 power saving fix - Fix hang when skipping modeset - GPU reset fixes - Doorbell fix when resizing BARs - Fix spurious warnings in gmc - Locking fix for AMDGPU_SCHED IOCTL - SR-IOV fix - DCN 3.1.4 fix - DCN 3.2 fix - Fix job cleanup when CS is aborted i915: - skl pipe source size check - mtl transcoder mask fix - DSI power on sequence fix - GuC versioning corner case fix" * tag 'drm-next-2023-05-05' of git://anongit.freedesktop.org/drm/drm: (48 commits) drm/amdgpu: drop redundant sched job cleanup when cs is aborted drm/amd/display: filter out invalid bits in pipe_fuses drm/amd/display: Change default Z8 watermark values drm/amdgpu: disable SDMA WPTR_POLL_ENABLE for SR-IOV drm/amdgpu: add a missing lock for AMDGPU_SCHED drm/amdgpu: fix an amdgpu_irq_put() issue in gmc_v9_0_hw_fini() drm/amdgpu: fix amdgpu_irq_put call trace in gmc_v10_0_hw_fini drm/amdgpu: fix amdgpu_irq_put call trace in gmc_v11_0_hw_fini drm/amdgpu: Enable doorbell selfring after resize FB BAR drm/amdgpu: Use the default reset when loading or reloading the driver drm/amdgpu: Fix mode2 reset for sienna cichlid drm/i915/dsi: Use unconditional msleep() instead of intel_dsi_msleep() drm/i915/mtl: Add the missing CPU transcoder mask in intel_device_info drm/i915/guc: Actually return an error if GuC version range check fails drm/amd/display: Lowering min Z8 residency time drm/amd/display: fix flickering caused by S/G mode drm/amd/display: Set min_width and min_height capability for DCN30 drm/amd/display: Isolate remaining FPU code in DCN32 drm/amd/display: Update bounding box values for DCN321 drm/amd/display: Do not clear GPINT register when releasing DMUB from reset ...
-
- May 05, 2023
-
-
Steven Rostedt (Google) authored
If a function had ever had IPMODIFY or DIRECT attached to it, where this is how live kernel patching and BPF overrides work, mark them and display an "M" in the enabled_functions and touched_functions files. This can be used for debugging. If a function had been modified and later there's a bug in the code related to that function, this can be used to know if the cause is possibly from a live kernel patch or a BPF program that changed the behavior of the code. Also update the documentation on the enabled_functions and touched_functions output, as it was missing direct callers and CALL_OPS. And include this new modify attribute. Link: https://lore.kernel.org/linux-trace-kernel/20230502213233.004e3ae4@gandalf.local.home Cc: Mark Rutland <mark.rutland@arm.com> Acked-by:
Masami Hiramatsu (Google) <mhiramat@kernel.org> Signed-off-by:
Steven Rostedt (Google) <rostedt@goodmis.org>
-
Lukas Bulwahn authored
Commit 2b6a7409 ("thermal: intel: menlow: Get rid of this driver") removes the driver drivers/thermal/intel/intel_menlow.c, but misses to remove its reference in MAINTAINERS. Hence, ./scripts/get_maintainer.pl --self-test=patterns complains about a broken reference. Remove the INTEL MENLOW THERMAL DRIVER section in MAINTAINERS. Fixes: 2b6a7409 ("thermal: intel: menlow: Get rid of this driver") Signed-off-by:
Lukas Bulwahn <lukas.bulwahn@gmail.com> Signed-off-by:
Rafael J. Wysocki <rafael.j.wysocki@intel.com>
-
Conor Dooley authored
Rob asked if I would be interested in helping with the dt-bindings maintenance, and since I am a glutton for punishment I accepted. Signed-off-by:
Conor Dooley <conor.dooley@microchip.com> Acked-by:
Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20230504-renderer-alive-1c01d431b2a7@spud Signed-off-by:
Rob Herring <robh@kernel.org>
-
Paolo Bonzini authored
Merge tag 'kvm-s390-next-6.4-2' of https://git.kernel.org/pub/scm/linux/kernel/git/kvms390/linux into HEAD For 6.4
-
https://github.com/kvm-x86/linuxPaolo Bonzini authored
Fix a long-standing flaw in x86's TDP MMU where unloading roots on a vCPU can result in the root being freed even though the root is completely valid and can be reused as-is (with a TLB flush).
-
https://github.com/kvm-riscv/linuxPaolo Bonzini authored
KVM/riscv changes for 6.4 - ONE_REG interface to enable/disable SBI extensions - Zbb extension for Guest/VM - AIA CSR virtualization
-
Florian Fainelli authored
The call to phy_stop() races with the later call to phy_disconnect(), resulting in concurrent phy_suspend() calls being run from different CPUs. The final call to phy_disconnect() ensures that the PHY is stopped and suspended, too. Fixes: c96e731c ("net: bcmgenet: connect and disconnect from the PHY state machine") Signed-off-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Shannon Nelson authored
Fix a double unlock in an error handling path by unlocking as soon as the error is seen and removing unlocks in the error cleanup path. Link: https://lore.kernel.org/kernel-janitors/209a09f6-5ec6-40c7-a5ec-6260d8f54d25@kili.mountain/ Fixes: 523847df ("pds_core: add devcmd device interfaces") Reported-by:
Dan Carpenter <dan.carpenter@linaro.org> Signed-off-by:
Shannon Nelson <shannon.nelson@amd.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Vlad Buslov says: ==================== Fixes for miss to tc action series Changes V1 -> V2: - Added new patch reverting Ivan's fix for the same issue. ==================== Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Vlad Buslov authored
When replacing a filter (i.e. 'fold' pointer is not NULL) the insertion of new filter to idr is postponed until later in code since handle is already provided by the user. However, the error handling code in fl_change() always assumes that the new filter had been inserted into idr. If error handler is reached when replacing existing filter it may remove it from idr therefore making it unreachable for delete or dump afterwards. Fix the issue by verifying that 'fold' argument wasn't provided by caller before calling idr_remove(). Fixes: 08a0063d ("net/sched: flower: Move filter handle initialization earlier") Signed-off-by:
Vlad Buslov <vladbu@nvidia.com> Reviewed-by:
Pedro Tammela <pctammela@mojatatu.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Vlad Buslov authored
This reverts commit 32eff6ba . Superseded by the following commit in this series. Signed-off-by:
Vlad Buslov <vladbu@nvidia.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Vlad Buslov authored
The cited commit moved idr initialization too early in fl_change() which allows concurrent users to access the filter that is still being initialized and is in inconsistent state, which, in turn, can cause NULL pointer dereference [0]. Since there is no obvious way to fix the ordering without reverting the whole cited commit, alternative approach taken to first insert NULL pointer into idr in order to allocate the handle but still cause fl_get() to return NULL and prevent concurrent users from seeing the filter while providing miss-to-action infrastructure with valid handle id early in fl_change(). [ 152.434728] general protection fault, probably for non-canonical address 0xdffffc0000000000: 0000 [#1] SMP KASAN [ 152.436163] KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007] [ 152.437269] CPU: 4 PID: 3877 Comm: tc Not tainted 6.3.0-rc4+ #5 [ 152.438110] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014 [ 152.439644] RIP: 0010:fl_dump_key+0x8b/0x1d10 [cls_flower] [ 152.440461] Code: 01 f2 02 f2 c7 40 08 04 f2 04 f2 c7 40 0c 04 f3 f3 f3 65 48 8b 04 25 28 00 00 00 48 89 84 24 00 01 00 00 48 89 c8 48 c1 e8 03 <0f> b6 04 10 84 c0 74 08 3c 03 0f 8e 98 19 00 00 8b 13 85 d2 74 57 [ 152.442885] RSP: 0018:ffff88817a28f158 EFLAGS: 00010246 [ 152.443851] RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000000 [ 152.444826] RDX: dffffc0000000000 RSI: ffffffff8500ae80 RDI: ffff88810a987900 [ 152.445791] RBP: ffff888179d88240 R08: ffff888179d8845c R09: ffff888179d88240 [ 152.446780] R10: ffffed102f451e48 R11: 00000000fffffff2 R12: ffff88810a987900 [ 152.447741] R13: ffffffff8500ae80 R14: ffff88810a987900 R15: ffff888149b3c738 [ 152.448756] FS: 00007f5eb2a34800(0000) GS:ffff88881ec00000(0000) knlGS:0000000000000000 [ 152.449888] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 152.450685] CR2: 000000000046ad19 CR3: 000000010b0bd006 CR4: 0000000000370ea0 [ 152.451641] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 152.452628] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 152.453588] Call Trace: [ 152.454032] <TASK> [ 152.454447] ? netlink_sendmsg+0x7a1/0xcb0 [ 152.455109] ? sock_sendmsg+0xc5/0x190 [ 152.455689] ? ____sys_sendmsg+0x535/0x6b0 [ 152.456320] ? ___sys_sendmsg+0xeb/0x170 [ 152.456916] ? do_syscall_64+0x3d/0x90 [ 152.457529] ? entry_SYSCALL_64_after_hwframe+0x46/0xb0 [ 152.458321] ? ___sys_sendmsg+0xeb/0x170 [ 152.458958] ? __sys_sendmsg+0xb5/0x140 [ 152.459564] ? do_syscall_64+0x3d/0x90 [ 152.460122] ? entry_SYSCALL_64_after_hwframe+0x46/0xb0 [ 152.460852] ? fl_dump_key_options.part.0+0xea0/0xea0 [cls_flower] [ 152.461710] ? _raw_spin_lock+0x7a/0xd0 [ 152.462299] ? _raw_read_lock_irq+0x30/0x30 [ 152.462924] ? nla_put+0x15e/0x1c0 [ 152.463480] fl_dump+0x228/0x650 [cls_flower] [ 152.464112] ? fl_tmplt_dump+0x210/0x210 [cls_flower] [ 152.464854] ? __kmem_cache_alloc_node+0x1a7/0x330 [ 152.465592] ? nla_put+0x15e/0x1c0 [ 152.466160] tcf_fill_node+0x515/0x9a0 [ 152.466766] ? tc_setup_offload_action+0xf0/0xf0 [ 152.467463] ? __alloc_skb+0x13c/0x2a0 [ 152.468067] ? __build_skb_around+0x330/0x330 [ 152.468814] ? fl_get+0x107/0x1a0 [cls_flower] [ 152.469503] tc_del_tfilter+0x718/0x1330 [ 152.470115] ? is_bpf_text_address+0xa/0x20 [ 152.470765] ? tc_ctl_chain+0xee0/0xee0 [ 152.471335] ? __kernel_text_address+0xe/0x30 [ 152.471948] ? unwind_get_return_address+0x56/0xa0 [ 152.472639] ? __thaw_task+0x150/0x150 [ 152.473218] ? arch_stack_walk+0x98/0xf0 [ 152.473839] ? __stack_depot_save+0x35/0x4c0 [ 152.474501] ? stack_trace_save+0x91/0xc0 [ 152.475119] ? security_capable+0x51/0x90 [ 152.475741] rtnetlink_rcv_msg+0x2c1/0x9d0 [ 152.476387] ? rtnl_calcit.isra.0+0x2b0/0x2b0 [ 152.477042] ? __sys_sendmsg+0xb5/0x140 [ 152.477664] ? do_syscall_64+0x3d/0x90 [ 152.478255] ? entry_SYSCALL_64_after_hwframe+0x46/0xb0 [ 152.479010] ? __stack_depot_save+0x35/0x4c0 [ 152.479679] ? __stack_depot_save+0x35/0x4c0 [ 152.480346] netlink_rcv_skb+0x12c/0x360 [ 152.480929] ? rtnl_calcit.isra.0+0x2b0/0x2b0 [ 152.481517] ? do_syscall_64+0x3d/0x90 [ 152.482061] ? netlink_ack+0x1550/0x1550 [ 152.482612] ? rhashtable_walk_peek+0x170/0x170 [ 152.483262] ? kmem_cache_alloc_node+0x1af/0x390 [ 152.483875] ? _copy_from_iter+0x3d6/0xc70 [ 152.484528] netlink_unicast+0x553/0x790 [ 152.485168] ? netlink_attachskb+0x6a0/0x6a0 [ 152.485848] ? unwind_next_frame+0x11cc/0x1a10 [ 152.486538] ? arch_stack_walk+0x61/0xf0 [ 152.487169] netlink_sendmsg+0x7a1/0xcb0 [ 152.487799] ? netlink_unicast+0x790/0x790 [ 152.488355] ? iovec_from_user.part.0+0x4d/0x220 [ 152.488990] ? _raw_spin_lock+0x7a/0xd0 [ 152.489598] ? netlink_unicast+0x790/0x790 [ 152.490236] sock_sendmsg+0xc5/0x190 [ 152.490796] ____sys_sendmsg+0x535/0x6b0 [ 152.491394] ? import_iovec+0x7/0x10 [ 152.491964] ? kernel_sendmsg+0x30/0x30 [ 152.492561] ? __copy_msghdr+0x3c0/0x3c0 [ 152.493160] ? do_syscall_64+0x3d/0x90 [ 152.493706] ___sys_sendmsg+0xeb/0x170 [ 152.494283] ? may_open_dev+0xd0/0xd0 [ 152.494858] ? copy_msghdr_from_user+0x110/0x110 [ 152.495541] ? __handle_mm_fault+0x2678/0x4ad0 [ 152.496205] ? copy_page_range+0x2360/0x2360 [ 152.496862] ? __fget_light+0x57/0x520 [ 152.497449] ? mas_find+0x1c0/0x1c0 [ 152.498026] ? sockfd_lookup_light+0x1a/0x140 [ 152.498703] __sys_sendmsg+0xb5/0x140 [ 152.499306] ? __sys_sendmsg_sock+0x20/0x20 [ 152.499951] ? do_user_addr_fault+0x369/0xd80 [ 152.500595] do_syscall_64+0x3d/0x90 [ 152.501185] entry_SYSCALL_64_after_hwframe+0x46/0xb0 [ 152.501917] RIP: 0033:0x7f5eb294f887 [ 152.502494] Code: 0a 00 f7 d8 64 89 02 48 c7 c0 ff ff ff ff eb b9 0f 1f 00 f3 0f 1e fa 64 8b 04 25 18 00 00 00 85 c0 75 10 b8 2e 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 51 c3 48 83 ec 28 89 54 24 1c 48 89 74 24 10 [ 152.505008] RSP: 002b:00007ffd2c708f78 EFLAGS: 00000246 ORIG_RAX: 000000000000002e [ 152.506152] RAX: ffffffffffffffda RBX: 00000000642d9472 RCX: 00007f5eb294f887 [ 152.507134] RDX: 0000000000000000 RSI: 00007ffd2c708fe0 RDI: 0000000000000003 [ 152.508113] RBP: 0000000000000000 R08: 0000000000000001 R09: 0000000000000000 [ 152.509119] R10: 00007f5eb2808708 R11: 0000000000000246 R12: 0000000000000001 [ 152.510068] R13: 0000000000000000 R14: 00007ffd2c70d1b8 R15: 0000000000485400 [ 152.511031] </TASK> [ 152.511444] Modules linked in: cls_flower sch_ingress openvswitch nsh mlx5_vdpa vringh vhost_iotlb vdpa mlx5_ib mlx5_core rpcrdma rdma_ucm ib_iser libiscsi scsi_transport_iscsi ib_umad rdma_cm ib_ipoib iw_cm ib_cm ib_uverbs ib_core xt_conntrack xt_MASQUERADE nf_conntrack_netlink nfnetlink xt_addrtype iptable_nat nf_nat br_netfilter overlay zram zsmalloc fuse [last unloaded: mlx5_core] [ 152.515720] ---[ end trace 0000000000000000 ]--- Fixes: 08a0063d ("net/sched: flower: Move filter handle initialization earlier") Signed-off-by:
Vlad Buslov <vladbu@nvidia.com> Reviewed-by:
Pedro Tammela <pctammela@mojatatu.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Shenwei Wang authored
In the current xdp_xmit implementation, if any single frame fails to transmit due to insufficient buffer descriptors, the function nevertheless reports success in sending all frames. This results in erroneously indicating that frames were transmitted when in fact they were dropped. This patch fixes the issue by ensureing the return value properly indicates the actual number of frames successfully transmitted, rather than potentially reporting success for all frames when some could not transmit. Fixes: 6d6b39f1 ("net: fec: add initial XDP support") Signed-off-by:
Gagandeep Singh <g.singh@nxp.com> Signed-off-by:
Shenwei Wang <shenwei.wang@nxp.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Lorenzo Bianconi authored
Introduce xdp_features support for bonding driver according to the slave devices attached to the master one. xdp_features is required whenever we want to xdp_redirect traffic into a bond device and then into selected slaves attached to it. Reviewed-by:
Simon Horman <simon.horman@corigine.com> Acked-by:
Jay Vosburgh <jay.vosburgh@canonical.com> Fixes: 66c0e13a ("drivers: net: turn on XDP features") Signed-off-by:
Lorenzo Bianconi <lorenzo@kernel.org> Reviewed-by:
Jussi Maki <joamaki@gmail.com> Tested-by:
Jussi Maki <joamaki@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Wei Fang authored
We should check whether the current SFI (Stream Filter Instance) table is full before creating a new SFI entry. However, the previous logic checks the handle by mistake and might lead to unpredictable behavior. Fixes: 888ae5a3 ("net: enetc: add tc flower psfp offload driver") Signed-off-by:
Wei Fang <wei.fang@nxp.com> Reviewed-by:
Leon Romanovsky <leonro@nvidia.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Martin Habets authored
We used to have a mailing list in the MAINTAINERS file, but removed this when we became part of Xilinx as it stopped working. Now inside AMD we have the list again. Add it back so patches will be seen by all sfc developers. Signed-off-by:
Martin Habets <habetsm.xilinx@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Wenliang Wang authored
For multi-queue and large ring-size use case, the following error occurred when free_unused_bufs: rcu: INFO: rcu_sched self-detected stall on CPU. Fixes: 986a4f4d ("virtio_net: multiqueue support") Signed-off-by:
Wenliang Wang <wangwenliang.1995@bytedance.com> Acked-by:
Michael S. Tsirkin <mst@redhat.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Michal Swiatkowski authored
VF to VF traffic shouldn't go outside. To enforce it, set only the loopback enable bit in case of all ingress type rules added via the tc tool. Fixes: 0d08a441 ("ice: ndo_setup_tc implementation for PF") Reported-by:
Sujai Buvaneswaran <Sujai.Buvaneswaran@intel.com> Signed-off-by:
Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Tested-by:
George Kuruvinakunnel <george.kuruvinakunnel@intel.com> Reviewed-by:
Simon Horman <simon.horman@corigine.com> Signed-off-by:
Tony Nguyen <anthony.l.nguyen@intel.com> Reviewed-by:
Leon Romanovsky <leonro@nvidia.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Arınç ÜNAL authored
On mt753x_cpu_port_enable() there's code that enables flooding for the CPU port only. Since mt753x_cpu_port_enable() runs twice when both CPU ports are enabled, port 6 becomes the only port to forward the frames to. But port 5 is the active port, so no frames received from the user ports will be forwarded to port 5 which breaks network connectivity. Every bit of the BC_FFP, UNM_FFP, and UNU_FFP bits represents a port. Fix this issue by setting the bit that corresponds to the CPU port without overwriting the other bits. Clear the bits beforehand only for the MT7531 switch. According to the documents MT7621 Giga Switch Programming Guide v0.3 and MT7531 Reference Manual for Development Board v1.0, after reset, the BC_FFP, UNM_FFP, and UNU_FFP bits are set to 1 for MT7531, 0 for MT7530. The commit 5e5502e0 ("net: dsa: mt7530: fix roaming from DSA user ports") silently changed the method to set the bits on the MT7530_MFC. Instead of clearing the relevant bits before mt7530_cpu_port_enable() which runs under a for loop, the commit started doing it on mt7530_cpu_port_enable(). Back then, this didn't really matter as only a single CPU port could be used since the CPU port number was hardcoded. The driver was later changed with commit 1f9a6abe ("net: dsa: mt7530: get cpu-port via dp->cpu_dp instead of constant") to retrieve the CPU port via dp->cpu_dp. With that, this silent change became an issue for when using multiple CPU ports. Fixes: 5e5502e0 ("net: dsa: mt7530: fix roaming from DSA user ports") Signed-off-by:
Arınç ÜNAL <arinc.unal@arinc9.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Arınç ÜNAL authored
The multi-chip module MT7530 switch with a 40 MHz oscillator on the MT7621AT, MT7621DAT, and MT7621ST SoCs forwards corrupt frames using trgmii. This is caused by the assumption that MT7621 SoCs have got 150 MHz PLL, hence using the ncpo1 value, 0x0780. My testing shows this value works on Unielec U7621-06, Bartel's testing shows it won't work on Hi-Link HLK-MT7621A and Netgear WAC104. All devices tested have got 40 MHz oscillators. Using the value for 125 MHz PLL, 0x0640, works on all boards at hand. The definitions for 125 MHz PLL exist on the Banana Pi BPI-R2 BSP source code whilst 150 MHz PLL don't. Forwarding frames using trgmii on the MCM MT7530 switch with a 25 MHz oscillator on the said MT7621 SoCs works fine because the ncpo1 value defined for it is for 125 MHz PLL. Change the 150 MHz PLL comment to 125 MHz PLL, and use the 125 MHz PLL ncpo1 values for both oscillator frequencies. Link: https://github.com/BPI-SINOVOIP/BPI-R2-bsp/blob/81d24bbce7d99524d0771a8bdb2d6663e4eb4faa/u-boot-mt/drivers/net/rt2880_eth.c#L2195 Fixes: 7ef6f6f8 ("net: dsa: mt7530: Add MT7621 TRGMII mode support") Tested-by:
Bartel Eerdekens <bartel.eerdekens@constell8.be> Signed-off-by:
Arınç ÜNAL <arinc.unal@arinc9.com> Reviewed-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
git://www.linux-watchdog.org/linux-watchdogLinus Torvalds authored
Pull watchdog updates from Wim Van Sebroeck: - Add watchdog driver for StarFive JH7100 and JH7110 Soc - Add Rockchip RK3588 devices - Add Qualcom IPQ5332 APSS, QCM2290 KPSS and SM6115 SoC devices - Add Mediatke MT8365 and MT6735 devices - Watchdog-core: Always set WDOG_HW_RUNNING when starting watchdog - Convert watchdog platform drivers to return void on the remove callback - Convert to devm_clk_get_enabled() helpers - ... and other small fixes and improvements * tag 'linux-watchdog-6.4-rc1' of git://www.linux-watchdog.org/linux-watchdog: (72 commits) watchdog: dw_wdt: Simplify clk management watchdog: dw_wdt: Fix the error handling path of dw_wdt_drv_probe() watchdog: starfive: Fix the warning of starfive_wdt_match watchdog: starfive: Fix the probe return error if PM and early_enable are both disabled MAINTAINERS: Add fragment for Xilinx watchdog driver watchdog: menz069_wdt: fix timeout setting watchdog: menz069_wdt: fix watchdog initialisation dt-bindings: watchdog: alphascale-asm9260: convert to DT schema watchdog: loongson1_wdt: Implement restart handler dt-bindings: watchdog: Document Qualcomm SM6115 watchdog dt-bindings: watchdog: realtek,otto-wdt: simplify requiring interrupt-names dt-bindings: watchdog: toshiba,visconti-wdt: simplify with unevaluatedProperties dt-bindings: watchdog: fsl-imx7ulp-wdt: simplify with unevaluatedProperties dt-bindings: watchdog: arm,sp805: drop unneeded minItems dt-bindings: watchdog: drop duplicated GPIO watchdog bindings dt-bindings: reset: Add binding for MediaTek MT6735 TOPRGU/WDT drivers: watchdog: Add StarFive Watchdog driver dt-bindings: watchdog: Add watchdog for StarFive JH7100 and JH7110 dt-bindings: watchdog: indentation, quotes and white-space cleanup watchdog: ebc-c384_wdt: Mark status as orphaned ...
-
Dave Airlie authored
Merge tag 'drm-intel-next-fixes-2023-05-04-1' of git://anongit.freedesktop.org/drm/drm-intel into drm-next Add missing GPU transcoder masks for MTL and fix DSI power on sequence for Nextbook Ares 8A. Fix GuC version corner case. Signed-off-by:
Dave Airlie <airlied@redhat.com> From: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/ZFOskabVuN45dNaA@jlahtine-mobl.ger.corp.intel.com
-
Dave Airlie authored
Merge tag 'amd-drm-fixes-6.4-2023-05-03' of https://gitlab.freedesktop.org/agd5f/linux into drm-next amd-drm-fixes-6.4-2023-05-03: amdgpu: - GPU reset fixes - Doorbell fix when resizing BARs - Fix spurious warnings in gmc - Locking fix for AMDGPU_SCHED IOCTL - SR-IOV fix - DCN 3.1.4 fix - DCN 3.2 fix - Fix job cleanup when CS is aborted Signed-off-by:
Dave Airlie <airlied@redhat.com> From: Alex Deucher <alexander.deucher@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230504034018.7950-1-alexander.deucher@amd.com
-
Dave Airlie authored
Merge tag 'drm-intel-next-fixes-2023-04-27' of git://anongit.freedesktop.org/drm/drm-intel into drm-next One cc stable for pipe source size check on SKL+ Signed-off-by:
Dave Airlie <airlied@redhat.com> From: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/ZEpbSG1ZOSVqzGLx@jlahtine-mobl.ger.corp.intel.com
-