- Nov 29, 2023
-
-
Greg Kroah-Hartman authored
Link: https://lore.kernel.org/r/20231124172010.413667921@linuxfoundation.org Tested-by:
Salvatore Bonaccorso <carnil@debian.org> Link: https://lore.kernel.org/r/20231125163140.940904812@linuxfoundation.org Tested-by:
Ron Economos <re@w6rz.net> Tested-by:
SeongJae Park <sj@kernel.org> Tested-by:
Pavel Machek (CIP) <pavel@denx.de> Link: https://lore.kernel.org/r/20231125194359.201910779@linuxfoundation.org Tested-by:
Florian Fainelli <florian.fainelli@broadcom.com> Tested-by:
Pavel Machek (CIP) <pavel@denx.de> Link: https://lore.kernel.org/r/20231126154359.953633996@linuxfoundation.org Tested-by:
SeongJae Park <sj@kernel.org> Tested-by:
Florian Fainelli <florian.fainelli@broadcom.com> Tested-by:
Nam Cao <namcao@linutronix.de> Tested-by:
Jon Hunter <jonathanh@nvidia.com> Tested-by:
Guenter Roeck <linux@roeck-us.net> Tested-by:
Conor Dooley <conor.dooley@microchip.com> Tested-by:
Allen Pais <apais@linux.microsoft.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Conor Dooley authored
commit 52909f17 upstream. As of commit 2ac87434 ("RISC-V: split early & late of_node to hartid mapping") my CI complains about newly added pr_err() messages during boot, for example: [ 0.000000] Couldn't find cpu id for hartid [0] [ 0.000000] riscv-intc: unable to find hart id for /cpus/cpu@0/interrupt-controller Before the split, riscv_of_processor_hartid() contained a check for whether the cpu was "available", before calling riscv_hartid_to_cpuid(), but after the split riscv_of_processor_hartid() can be called for cpus that are disabled. Most callers of riscv_hartid_to_cpuid() already report custom errors where it falls, making this print superfluous in those case. In other places, the print adds nothing - see riscv_intc_init() for example. Fixes: 2ac87434 ("RISC-V: split early & late of_node to hartid mapping") Signed-off-by:
Conor Dooley <conor.dooley@microchip.com> Link: https://lore.kernel.org/r/20230629-paternity-grafted-b901b76d04a0@wendy Signed-off-by:
Palmer Dabbelt <palmer@rivosinc.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Robert Richter authored
commit a70fc4ed upstream. In devm_cxl_add_port() the port creation may fail and its associated pointer does not contain a valid address. During error message generation this invalid port address is used. Fix that wrong address access. Fixes: f3cd264c ("cxl: Unify debug messages when calling devm_cxl_add_port()") Signed-off-by:
Robert Richter <rrichter@amd.com> Reviewed-by:
Dave Jiang <dave.jiang@intel.com> Link: https://lore.kernel.org/r/20230519215436.3394532-1-rrichter@amd.com Signed-off-by:
Dan Williams <dan.j.williams@intel.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Victor Shih authored
commit 85dd3af6 upstream. Due to a flaw in the hardware design, the GL9755 replay timer frequently times out when ASPM is enabled. As a result, the warning messages will often appear in the system log when the system accesses the GL9755 PCI config. Therefore, the replay timer timeout must be masked. Fixes: 36ed2fd3 ("mmc: sdhci-pci-gli: A workaround to allow GL9755 to enter ASPM L1.2") Signed-off-by:
Victor Shih <victor.shih@genesyslogic.com.tw> Acked-by:
Adrian Hunter <adrian.hunter@intel.com> Acked-by:
Kai-Heng Feng <kai.heng.geng@canonical.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20231107095741.8832-3-victorshihgli@gmail.com Signed-off-by:
Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by:
Victor Shih <victor.shih@genesyslogic.com.tw> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Vicki Pfau authored
commit 1999a6b1 upstream. This adds support for the Turtle Beach REACT-R and Recon Xbox controllers Signed-off-by:
Vicki Pfau <vi@endrift.com> Link: https://lore.kernel.org/r/20230225012147.276489-4-vi@endrift.com Signed-off-by:
Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Steven Rostedt (Google) authored
commit bb32500f upstream. The following can crash the kernel: # cd /sys/kernel/tracing # echo 'p:sched schedule' > kprobe_events # exec 5>>events/kprobes/sched/enable # > kprobe_events # exec 5>&- The above commands: 1. Change directory to the tracefs directory 2. Create a kprobe event (doesn't matter what one) 3. Open bash file descriptor 5 on the enable file of the kprobe event 4. Delete the kprobe event (removes the files too) 5. Close the bash file descriptor 5 The above causes a crash! BUG: kernel NULL pointer dereference, address: 0000000000000028 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 0 P4D 0 Oops: 0000 [#1] PREEMPT SMP PTI CPU: 6 PID: 877 Comm: bash Not tainted 6.5.0-rc4-test-00008-g2c6b6b1029d4-dirty #186 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.2-debian-1.16.2-1 04/01/2014 RIP: 0010:tracing_release_file_tr+0xc/0x50 What happens here is that the kprobe event creates a trace_event_file "file" descriptor that represents the file in tracefs to the event. It maintains state of the event (is it enabled for the given instance?). Opening the "enable" file gets a reference to the event "file" descriptor via the open file descriptor. When the kprobe event is deleted, the file is also deleted from the tracefs system which also frees the event "file" descriptor. But as the tracefs file is still opened by user space, it will not be totally removed until the final dput() is called on it. But this is not true with the event "file" descriptor that is already freed. If the user does a write to or simply closes the file descriptor it will reference the event "file" descriptor that was just freed, causing a use-after-free bug. To solve this, add a ref count to the event "file" descriptor as well as a new flag called "FREED". The "file" will not be freed until the last reference is released. But the FREE flag will be set when the event is removed to prevent any more modifications to that event from happening, even if there's still a reference to the event "file" descriptor. Link: https://lore.kernel.org/linux-trace-kernel/20231031000031.1e705592@gandalf.local.home/ Link: https://lore.kernel.org/linux-trace-kernel/20231031122453.7a48b923@gandalf.local.home Cc: stable@vger.kernel.org Cc: Mark Rutland <mark.rutland@arm.com> Fixes: f5ca233e ("tracing: Increase trace array ref count on enable and filter files") Reported-by:
Beau Belgrave <beaub@linux.microsoft.com> Tested-by:
Beau Belgrave <beaub@linux.microsoft.com> Reviewed-by:
Masami Hiramatsu (Google) <mhiramat@kernel.org> Signed-off-by:
Steven Rostedt (Google) <rostedt@goodmis.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Michael Ellerman authored
commit feea65a3 upstream. As reported by Mahesh & Aneesh, opal_prd_msg_notifier() triggers a FORTIFY_SOURCE warning: memcpy: detected field-spanning write (size 32) of single field "&item->msg" at arch/powerpc/platforms/powernv/opal-prd.c:355 (size 4) WARNING: CPU: 9 PID: 660 at arch/powerpc/platforms/powernv/opal-prd.c:355 opal_prd_msg_notifier+0x174/0x188 [opal_prd] NIP opal_prd_msg_notifier+0x174/0x188 [opal_prd] LR opal_prd_msg_notifier+0x170/0x188 [opal_prd] Call Trace: opal_prd_msg_notifier+0x170/0x188 [opal_prd] (unreliable) notifier_call_chain+0xc0/0x1b0 atomic_notifier_call_chain+0x2c/0x40 opal_message_notify+0xf4/0x2c0 This happens because the copy is targeting item->msg, which is only 4 bytes in size, even though the enclosing item was allocated with extra space following the msg. To fix the warning define struct opal_prd_msg with a union of the header and a flex array, and have the memcpy target the flex array. Reported-by:
"Aneesh Kumar K.V" <aneesh.kumar@linux.ibm.com> Reported-by:
Mahesh Salgaonkar <mahesh@linux.ibm.com> Tested-by:
Mahesh Salgaonkar <mahesh@linux.ibm.com> Reviewed-by:
Mahesh Salgaonkar <mahesh@linux.ibm.com> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au> Link: https://msgid.link/20230821142820.497107-1-mpe@ellerman.id.au Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Lewis Huang authored
commit 5911d02c upstream. [WHY] Flush command sent to DMCUB spends more time for execution on a dGPU than on an APU. This causes cursor lag when using high refresh rate mouses. [HOW] 1. Change the DMCUB mailbox memory location from FB to inbox. 2. Only change windows memory to inbox. Cc: Mario Limonciello <mario.limonciello@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Reviewed-by:
Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Acked-by:
Alex Hung <alex.hung@amd.com> Signed-off-by:
Lewis Huang <lewis.huang@amd.com> Tested-by:
Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by:
Alex Deucher <alexander.deucher@amd.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Tianci Yin authored
commit 435f5b36 upstream. [WHY] When cursor moves across screen boarder, lag cursor observed, since subvp settings need to sync up with vblank that causes cursor updates being delayed. [HOW] Enable fast plane updates on DCN3.2 to fix it. Cc: Mario Limonciello <mario.limonciello@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Reviewed-by:
Aurabindo Pillai <aurabindo.pillai@amd.com> Acked-by:
Alex Hung <alex.hung@amd.com> Signed-off-by:
Tianci Yin <tianci.yin@amd.com> Tested-by:
Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by:
Alex Deucher <alexander.deucher@amd.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Mario Limonciello authored
commit b71f4ade upstream. When ddc_service_construct() is called, it explicitly checks both the link type and whether there is something on the link which will dictate whether the pin is marked as hw_supported. If the pin isn't set or the link is not set (such as from unloading/reloading amdgpu in an IGT test) then fail the amdgpu_dm_i2c_xfer() call. Cc: stable@vger.kernel.org Fixes: 22676bc5 ("drm/amd/display: Fix dmub soft hang for PSR 1") Link: https://github.com/fwupd/fwupd/issues/6327 Signed-off-by:
Mario Limonciello <mario.limonciello@amd.com> Reviewed-by:
Harry Wentland <harry.wentland@amd.com> Signed-off-by:
Alex Deucher <alexander.deucher@amd.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Christian König authored
commit 17daf01a upstream. Otherwise userspace can spam the logs by using incorrect input values. Signed-off-by:
Christian König <christian.koenig@amd.com> Reviewed-by:
Alex Deucher <alexander.deucher@amd.com> Signed-off-by:
Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Christian König authored
commit 12f76050 upstream. We should not leak the pointer where we couldn't grab the reference on to the caller because it can be that the error handling still tries to put the reference then. Signed-off-by:
Christian König <christian.koenig@amd.com> Reviewed-by:
Alex Deucher <alexander.deucher@amd.com> Signed-off-by:
Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Alex Deucher authored
commit 432e664e upstream. The ATRM ACPI method is for fetching the dGPU vbios rom image on laptops and all-in-one systems. It should not be used for external add in cards. If the dGPU is thunderbolt connected, don't try ATRM. v2: pci_is_thunderbolt_attached only works for Intel. Use pdev->external_facing instead. v3: dev_is_removable() seems to be what we want Link: https://gitlab.freedesktop.org/drm/amd/-/issues/2925 Reviewed-by:
Mario Limonciello <mario.limonciello@amd.com> Signed-off-by:
Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Alex Deucher authored
commit 7b1c6263 upstream. It's only valid on Intel systems with the Intel VSEC. Use dev_is_removable() instead. This should do the right thing regardless of the platform. Link: https://gitlab.freedesktop.org/drm/amd/-/issues/2925 Reviewed-by:
Mario Limonciello <mario.limonciello@amd.com> Signed-off-by:
Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Alex Deucher authored
commit 23170863 upstream. This was fixed in PMFW before launch and is no longer required. Reviewed-by:
Yang Wang <kevinyang.wang@amd.com> Signed-off-by:
Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org # 6.1.x Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Ma Jun authored
commit 7f3e6b84 upstream. MACO only works if BACO is supported Signed-off-by:
Ma Jun <Jun.Ma2@amd.com> Reviewed-by:
Kenneth Feng <kenneth.feng@amd.com> Signed-off-by:
Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org # 6.1.x Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Kunwu Chan authored
commit 1a8e9bad upstream. Fix smatch warning: drivers/gpu/drm/i915/gem/i915_gem_context.c:847 set_proto_ctx_sseu() warn: potential spectre issue 'pc->user_engines' [r] (local cap) Fixes: d4433c76 ("drm/i915/gem: Use the proto-context to handle create parameters (v5)") Cc: <stable@vger.kernel.org> # v5.15+ Signed-off-by:
Kunwu Chan <chentao@kylinos.cn> Reviewed-by:
Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com> Signed-off-by:
Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231103110922.430122-1-tvrtko.ursulin@linux.intel.com (cherry picked from commit 27b08638 ) Signed-off-by:
Jani Nikula <jani.nikula@intel.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Ville Syrjälä authored
commit 0cb89cd4 upstream. On GLK CDCLK frequency needs to be at least 2*96 MHz when accessing the audio hardware. Currently we bump the CDCLK frequency up temporarily (if not high enough already) whenever audio hardware is being accessed, and drop it back down afterwards. With a single active pipe this works just fine as we can switch between all the valid CDCLK frequencies by changing the cd2x divider, which doesn't require a full modeset. However with multiple active pipes the cd2x divider trick no longer works, and thus we end up blinking all displays off and back on. To avoid this let's just bump the CDCLK frequency to >=2*96MHz whenever multiple pipes are active. The downside is slightly higher power consumption, but that seems like an acceptable tradeoff. With a single active pipe we can stick to the current more optiomal (from power comsumption POV) behaviour. Cc: stable@vger.kernel.org Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/9599 Signed-off-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231031160800.18371-1-ville.syrjala@linux.intel.com Reviewed-by:
Jani Nikula <jani.nikula@intel.com> (cherry picked from commit 451eaa1a ) Signed-off-by:
Jani Nikula <jani.nikula@intel.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Bas Nieuwenhuizen authored
commit 08e9ebc7 upstream. The incoming strings might not be terminated by a newline or a 0. (found while testing a program that just wrote the string itself, causing a crash) Cc: stable@vger.kernel.org Fixes: e3933f26 ("drm/amd/pp: Add edit/commit/show OD clock/voltage support in sysfs") Signed-off-by:
Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl> Signed-off-by:
Alex Deucher <alexander.deucher@amd.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Jan Kara authored
commit 91562895 upstream. Gao Xiang has reported that on ext4 O_SYNC direct IO does not properly sync file size update and thus if we crash at unfortunate moment, the file can have smaller size although O_SYNC IO has reported successful completion. The problem happens because update of on-disk inode size is handled in ext4_dio_write_iter() *after* iomap_dio_rw() (and thus dio_complete() in particular) has returned and generic_file_sync() gets called by dio_complete(). Fix the problem by handling on-disk inode size update directly in our ->end_io completion handler. References: https://lore.kernel.org/all/02d18236-26ef-09b0-90ad-030c4fe3ee20@linux.alibaba.com Reported-by:
Gao Xiang <hsiangkao@linux.alibaba.com> CC: stable@vger.kernel.org Fixes: 378f32ba ("ext4: introduce direct I/O write using iomap infrastructure") Signed-off-by:
Jan Kara <jack@suse.cz> Tested-by:
Joseph Qi <joseph.qi@linux.alibaba.com> Reviewed-by:
"Ritesh Harjani (IBM)" <ritesh.list@gmail.com> Link: https://lore.kernel.org/r/20231013121350.26872-1-jack@suse.cz Signed-off-by:
Theodore Ts'o <tytso@mit.edu> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Kemeng Shi authored
commit 9adac8b0 upstream. add missed brelse in update_backups Signed-off-by:
Kemeng Shi <shikemeng@huaweicloud.com> Reviewed-by:
Theodore Ts'o <tytso@mit.edu> Link: https://lore.kernel.org/r/20230826174712.4059355-3-shikemeng@huaweicloud.com Signed-off-by:
Theodore Ts'o <tytso@mit.edu> Cc: stable@kernel.org Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Kemeng Shi authored
commit 40dd7953 upstream. Wrong check of gdb backup in meta bg as following: first_group is the first group of meta_bg which contains target group, so target group is always >= first_group. We check if target group has gdb backup by comparing first_group with [group + 1] and [group + EXT4_DESC_PER_BLOCK(sb) - 1]. As group >= first_group, then [group + N] is > first_group. So no copy of gdb backup in meta bg is done in setup_new_flex_group_blocks. No need to do gdb backup copy in meta bg from setup_new_flex_group_blocks as we always copy updated gdb block to backups at end of ext4_flex_group_add as following: ext4_flex_group_add /* no gdb backup copy for meta bg any more */ setup_new_flex_group_blocks /* update current group number */ ext4_update_super sbi->s_groups_count += flex_gd->count; /* * if group in meta bg contains backup is added, the primary gdb block * of the meta bg will be copy to backup in new added group here. */ for (; gdb_num <= gdb_num_end; gdb_num++) update_backups(...) In summary, we can remove wrong gdb backup copy code in setup_new_flex_group_blocks. Signed-off-by:
Kemeng Shi <shikemeng@huaweicloud.com> Reviewed-by:
Theodore Ts'o <tytso@mit.edu> Link: https://lore.kernel.org/r/20230826174712.4059355-5-shikemeng@huaweicloud.com Signed-off-by:
Theodore Ts'o <tytso@mit.edu> Cc: stable@kernel.org Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Zhang Yi authored
commit 40ea9839 upstream. When big allocate feature is enabled, we need to count and update reserved clusters before removing a delayed only extent_status entry. {init|count|get}_rsvd() have already done this, but the start block number of this counting isn't correct in the following case. lblk end | | v v ------------------------- | | orig_es ------------------------- ^ ^ len1 is 0 | len2 | If the start block of the orig_es entry founded is bigger than lblk, we passed lblk as start block to count_rsvd(), but the length is correct, finally, the range to be counted is offset. This patch fix this by passing the start blocks to 'orig_es->lblk + len1'. Signed-off-by:
Zhang Yi <yi.zhang@huawei.com> Cc: stable@kernel.org Link: https://lore.kernel.org/r/20230824092619.1327976-2-yi.zhang@huaweicloud.com Signed-off-by:
Theodore Ts'o <tytso@mit.edu> Reviewed-by:
Jan Kara <jack@suse.cz> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Kemeng Shi authored
commit 48f15515 upstream. Avoid to ignore error in "err". Signed-off-by:
Kemeng Shi <shikemeng@huaweicloud.com> Link: https://lore.kernel.org/r/20230826174712.4059355-4-shikemeng@huaweicloud.com Signed-off-by:
Theodore Ts'o <tytso@mit.edu> Cc: stable@kernel.org Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Ojaswin Mujoo authored
commit 2cd8bdb5 upstream. ** Short Version ** In ext4 with dioread_nolock, we could have a scenario where the bh returned by get_blocks (ext4_get_block_unwritten()) in __block_write_begin_int() has UNWRITTEN and MAPPED flag set. Since such a bh does not have NEW flag set we never zero out the range of bh that is not under write, causing whatever stale data is present in the folio at that time to be written out to disk. To fix this mark the buffer as new, in case it is unwritten, in ext4_get_block_unwritten(). ** Long Version ** The issue mentioned above was resulting in two different bugs: 1. On block size < page size case in ext4, generic/269 was reliably failing with dioread_nolock. The state of the write was as follows: * The write was extending i_size. * The last block of the file was fallocated and had an unwritten extent * We were near ENOSPC and hence we were switching to non-delayed alloc allocation. In this case, the back trace that triggers the bug is as follows: ext4_da_write_begin() /* switch to nodelalloc due to low space */ ext4_write_begin() ext4_should_dioread_nolock() // true since mount flags still have delalloc __block_write_begin(..., ext4_get_block_unwritten) __block_write_begin_int() for(each buffer head in page) { /* first iteration, this is bh1 which contains i_size */ if (!buffer_mapped) get_block() /* returns bh with only UNWRITTEN and MAPPED */ /* second iteration, bh2 */ if (!buffer_mapped) get_block() /* we fail here, could be ENOSPC */ } if (err) /* * this would zero out all new buffers and mark them uptodate. * Since bh1 was never marked new, we skip it here which causes * the bug later. */ folio_zero_new_buffers(); /* ext4_wrte_begin() error handling */ ext4_truncate_failed_write() ext4_truncate() ext4_block_truncate_page() __ext4_block_zero_page_range() if(!buffer_uptodate()) ext4_read_bh_lock() ext4_read_bh() -> ... ext4_submit_bh_wbc() BUG_ON(buffer_unwritten(bh)); /* !!! */ 2. The second issue is stale data exposure with page size >= blocksize with dioread_nolock. The conditions needed for it to happen are same as the previous issue ie dioread_nolock around ENOSPC condition. The issue is also similar where in __block_write_begin_int() when we call ext4_get_block_unwritten() on the buffer_head and the underlying extent is unwritten, we get an unwritten and mapped buffer head. Since it is not new, we never zero out the partial range which is not under write, thus writing stale data to disk. This can be easily observed with the following reproducer: fallocate -l 4k testfile xfs_io -c "pwrite 2k 2k" testfile # hexdump output will have stale data in from byte 0 to 2k in testfile hexdump -C testfile NOTE: To trigger this, we need dioread_nolock enabled and write happening via ext4_write_begin(), which is usually used when we have -o nodealloc. Since dioread_nolock is disabled with nodelalloc, the only alternate way to call ext4_write_begin() is to ensure that delayed alloc switches to nodelalloc ie ext4_da_write_begin() calls ext4_write_begin(). This will usually happen when ext4 is almost full like the way generic/269 was triggering it in Issue 1 above. This might make the issue harder to hit. Hence, for reliable replication, I used the below patch to temporarily allow dioread_nolock with nodelalloc and then mount the disk with -o nodealloc,dioread_nolock. With this you can hit the stale data issue 100% of times: @@ -508,8 +508,8 @@ static inline int ext4_should_dioread_nolock(struct inode *inode) if (ext4_should_journal_data(inode)) return 0; /* temporary fix to prevent generic/422 test failures */ - if (!test_opt(inode->i_sb, DELALLOC)) - return 0; + // if (!test_opt(inode->i_sb, DELALLOC)) + // return 0; return 1; } After applying this patch to mark buffer as NEW, both the above issues are fixed. Signed-off-by:
Ojaswin Mujoo <ojaswin@linux.ibm.com> Cc: stable@kernel.org Reviewed-by:
Jan Kara <jack@suse.cz> Reviewed-by:
"Ritesh Harjani (IBM)" <ritesh.list@gmail.com> Link: https://lore.kernel.org/r/d0ed09d70a9733fbb5349c5c7b125caac186ecdf.1695033645.git.ojaswin@linux.ibm.com Signed-off-by:
Theodore Ts'o <tytso@mit.edu> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Kemeng Shi authored
commit 31f13421 upstream. Commit 0aeaa255 ("ext4: fix corruption when online resizing a 1K bigalloc fs") found that primary superblock's offset in its group is not equal to offset of backup superblock in its group when block size is 1K and bigalloc is enabled. As group descriptor blocks are right after superblock, we can't pass block number of gdb to update_backups for the same reason. The root casue of the issue above is that leading 1K padding block is count as data block offset for primary block while backup block has no padding block offset in its group. Remove padding data block count to fix the issue for gdb backups. For meta_bg case, update_backups treat blk_off as block number, do no conversion in this case. Signed-off-by:
Kemeng Shi <shikemeng@huaweicloud.com> Reviewed-by:
Theodore Ts'o <tytso@mit.edu> Link: https://lore.kernel.org/r/20230826174712.4059355-2-shikemeng@huaweicloud.com Signed-off-by:
Theodore Ts'o <tytso@mit.edu> Cc: stable@kernel.org Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Max Kellermann authored
commit 484fd6c1 upstream. The function ext4_init_acl() calls posix_acl_create() which is responsible for applying the umask. But without CONFIG_EXT4_FS_POSIX_ACL, ext4_init_acl() is an empty inline function, and nobody applies the umask. This fixes a bug which causes the umask to be ignored with O_TMPFILE on ext4: https://github.com/MusicPlayerDaemon/MPD/issues/558 https://bugs.gentoo.org/show_bug.cgi?id=686142#c3 https://bugzilla.kernel.org/show_bug.cgi?id=203625 Reviewed-by:
"J. Bruce Fields" <bfields@redhat.com> Cc: stable@vger.kernel.org Signed-off-by:
Max Kellermann <max.kellermann@ionos.com> Link: https://lore.kernel.org/r/20230919081824.1096619-1-max.kellermann@ionos.com Signed-off-by:
Theodore Ts'o <tytso@mit.edu> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Heiner Kallweit authored
commit 6a263102 upstream. This reverts commit efa5f131 . I couldn't reproduce the reported issue. What I did, based on a pcap packet log provided by the reporter: - Used same chip version (RTL8168h) - Set MAC address to the one used on the reporters system - Replayed the EAPOL unicast packet that, according to the reporter, was filtered out by the mc filter. The packet was properly received. Therefore the root cause of the reported issue seems to be somewhere else. Disabling mc filtering completely for the most common chip version is a quite big hammer. Therefore revert the change and wait for further analysis results from the reporter. Cc: stable@vger.kernel.org Signed-off-by:
Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Andrey Konovalov authored
commit 87889f1b upstream. In the current driver csid Test Pattern Generator (TPG) doesn't work. This change: - fixes writing frame width and height values into CSID_TPG_DT_n_CFG_0 - fixes the shift by one between test_pattern control value and the actual pattern. - drops fixed VC of 0x0a which testing showed prohibited some test patterns in the CSID to produce output. So that TPG starts working, but with the below limitations: - only test_pattern=9 works as it should - test_pattern=8 and test_pattern=7 produce black frame (all zeroes) - the rest of test_pattern's don't work (yavta doesn't get the data) - regardless of the CFA pattern set by 'media-ctl -V' the actual pixel order is always the same (RGGB for any RAW8 or RAW10P format in 4608x2592 resolution). Tested with: RAW10P format, VC0: media-ctl -V '"msm_csid0":0[fmt:SRGGB10/4608x2592 field:none]' media-ctl -V '"msm_vfe0_rdi0":0[fmt:SRGGB10/4608x2592 field:none]' media-ctl -l '"msm_csid0":1->"msm_vfe0_rdi0":0[1]' v4l2-ctl -d /dev/v4l-subdev6 -c test_pattern=9 yavta -B capture-mplane --capture=3 -n 3 -f SRGGB10P -s 4608x2592 /dev/video0 RAW10P format, VC1: media-ctl -V '"msm_csid0":2[fmt:SRGGB10/4608x2592 field:none]' media-ctl -V '"msm_vfe0_rdi1":0[fmt:SRGGB10/4608x2592 field:none]' media-ctl -l '"msm_csid0":2->"msm_vfe0_rdi1":0[1]' v4l2-ctl -d /dev/v4l-subdev6 -c test_pattern=9 yavta -B capture-mplane --capture=3 -n 3 -f SRGGB10P -s 4608x2592 /dev/video1 RAW8 format, VC0: media-ctl --reset media-ctl -V '"msm_csid0":0[fmt:SRGGB8/4608x2592 field:none]' media-ctl -V '"msm_vfe0_rdi0":0[fmt:SRGGB8/4608x2592 field:none]' media-ctl -l '"msm_csid0":1->"msm_vfe0_rdi0":0[1]' yavta -B capture-mplane --capture=3 -n 3 -f SRGGB8 -s 4608x2592 /dev/video0 Fixes: eebe6d00 ("media: camss: Add support for CSID hardware version Titan 170") Cc: stable@vger.kernel.org Signed-off-by:
Andrey Konovalov <andrey.konovalov@linaro.org> Signed-off-by:
Bryan O'Donoghue <bryan.odonoghue@linaro.org> Reviewed-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by:
Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Bryan O'Donoghue authored
commit d8f7e1a6 upstream. define CSIPHY_3PH_CMN_CSI_COMMON_CTRL5_CLK_ENABLE BIT(7) disjunction for gen2 ? BIT(7) : is a nop we are setting the same bit either way. Fixes: 4abb2130 ("media: camss: csiphy: Move to hardcode CSI Clock Lane number") Cc: stable@vger.kernel.org Signed-off-by:
Bryan O'Donoghue <bryan.odonoghue@linaro.org> Reviewed-by:
Konrad Dybcio <konrad.dybcio@linaro.org> Reviewed-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by:
Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Bryan O'Donoghue authored
commit b6e1bdca upstream. check_clock doesn't account for vfe_lite which means that vfe_lite will never get validated by this routine. Add the clock name to the expected set to remediate. Fixes: 7319cdf1 ("media: camss: Add support for VFE hardware version Titan 170") Cc: stable@vger.kernel.org Signed-off-by:
Bryan O'Donoghue <bryan.odonoghue@linaro.org> Reviewed-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by:
Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Bryan O'Donoghue authored
commit 7f24d291 upstream. vfe-480 is copied from vfe-17x and has the same racy idle timeout bug as in 17x. Fix the vfe_disable_output() logic to no longer be racy and to conform to the 17x way of quiescing and then resetting the VFE. Fixes: 4edc8eae ("media: camss: Add initial support for VFE hardware version Titan 480") Cc: stable@vger.kernel.org Signed-off-by:
Bryan O'Donoghue <bryan.odonoghue@linaro.org> Signed-off-by:
Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Bryan O'Donoghue authored
commit 3143ad28 upstream. There are two problems with the current vfe_disable_output() routine. Firstly we rightly use a spinlock to protect output->gen2.active_num everywhere except for in the IDLE timeout path of vfe_disable_output(). Even if that is not racy "in practice" somehow it is by happenstance not by design. Secondly we do not get consistent behaviour from this routine. On sc8280xp 50% of the time I get "VFE idle timeout - resetting". In this case the subsequent capture will succeed. The other 50% of the time, we don't hit the idle timeout, never do the VFE reset and subsequent captures stall indefinitely. Rewrite the vfe_disable_output() routine to - Quiesce write masters with vfe_wm_stop() - Set active_num = 0 remembering to hold the spinlock when we do so followed by - Reset the VFE Testing on sc8280xp and sdm845 shows this to be a valid fix. Fixes: 7319cdf1 ("media: camss: Add support for VFE hardware version Titan 170") Cc: stable@vger.kernel.org Signed-off-by:
Bryan O'Donoghue <bryan.odonoghue@linaro.org> Signed-off-by:
Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Bryan O'Donoghue authored
commit 26bda3da upstream. Right now it is possible to do a vfe_get() with the internal reference count at 1. If vfe_check_clock_rates() returns non-zero then we will leave the reference count as-is and run: - pm_runtime_put_sync() - vfe->ops->pm_domain_off() skip: - camss_disable_clocks() Subsequent vfe_put() calls will when the ref-count is non-zero unconditionally run: - pm_runtime_put_sync() - vfe->ops->pm_domain_off() - camss_disable_clocks() vfe_get() should not attempt to roll-back on error when the ref-count is non-zero as the upper layers will still do their own vfe_put() operations. vfe_put() will drop the reference count and do the necessary power domain release, the cleanup jumps in vfe_get() should only be run when the ref-count is zero. [ 50.095796] CPU: 7 PID: 3075 Comm: cam Not tainted 6.3.2+ #80 [ 50.095798] Hardware name: LENOVO 21BXCTO1WW/21BXCTO1WW, BIOS N3HET82W (1.54 ) 05/26/2023 [ 50.095799] pstate: 60400005 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 50.095802] pc : refcount_warn_saturate+0xf4/0x148 [ 50.095804] lr : refcount_warn_saturate+0xf4/0x148 [ 50.095805] sp : ffff80000c7cb8b0 [ 50.095806] x29: ffff80000c7cb8b0 x28: ffff16ecc0e3fc10 x27: 0000000000000000 [ 50.095810] x26: 0000000000000000 x25: 0000000000020802 x24: 0000000000000000 [ 50.095813] x23: ffff16ecc7360640 x22: 00000000ffffffff x21: 0000000000000005 [ 50.095815] x20: ffff16ed175f4400 x19: ffffb4d9852942a8 x18: ffffffffffffffff [ 50.095818] x17: ffffb4d9852d4a48 x16: ffffb4d983da5db8 x15: ffff80000c7cb320 [ 50.095821] x14: 0000000000000001 x13: 2e656572662d7265 x12: 7466612d65737520 [ 50.095823] x11: 00000000ffffefff x10: ffffb4d9850cebf0 x9 : ffffb4d9835cf954 [ 50.095826] x8 : 0000000000017fe8 x7 : c0000000ffffefff x6 : 0000000000057fa8 [ 50.095829] x5 : ffff16f813fe3d08 x4 : 0000000000000000 x3 : ffff621e8f4d2000 [ 50.095832] x2 : 0000000000000000 x1 : 0000000000000000 x0 : ffff16ed32119040 [ 50.095835] Call trace: [ 50.095836] refcount_warn_saturate+0xf4/0x148 [ 50.095838] device_link_put_kref+0x84/0xc8 [ 50.095843] device_link_del+0x38/0x58 [ 50.095846] vfe_pm_domain_off+0x3c/0x50 [qcom_camss] [ 50.095860] vfe_put+0x114/0x140 [qcom_camss] [ 50.095869] csid_set_power+0x2c8/0x408 [qcom_camss] [ 50.095878] pipeline_pm_power_one+0x164/0x170 [videodev] [ 50.095896] pipeline_pm_power+0xc4/0x110 [videodev] [ 50.095909] v4l2_pipeline_pm_use+0x5c/0xa0 [videodev] [ 50.095923] v4l2_pipeline_pm_get+0x1c/0x30 [videodev] [ 50.095937] video_open+0x7c/0x100 [qcom_camss] [ 50.095945] v4l2_open+0x84/0x130 [videodev] [ 50.095960] chrdev_open+0xc8/0x250 [ 50.095964] do_dentry_open+0x1bc/0x498 [ 50.095966] vfs_open+0x34/0x40 [ 50.095968] path_openat+0xb44/0xf20 [ 50.095971] do_filp_open+0xa4/0x160 [ 50.095974] do_sys_openat2+0xc8/0x188 [ 50.095975] __arm64_sys_openat+0x6c/0xb8 [ 50.095977] invoke_syscall+0x50/0x128 [ 50.095982] el0_svc_common.constprop.0+0x4c/0x100 [ 50.095985] do_el0_svc+0x40/0xa8 [ 50.095988] el0_svc+0x2c/0x88 [ 50.095991] el0t_64_sync_handler+0xf4/0x120 [ 50.095994] el0t_64_sync+0x190/0x198 [ 50.095996] ---[ end trace 0000000000000000 ]--- Fixes: 77909691 ("media: camss: vfe: Fix runtime PM imbalance on error") Cc: stable@vger.kernel.org Signed-off-by:
Bryan O'Donoghue <bryan.odonoghue@linaro.org> Reviewed-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by:
Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Bryan O'Donoghue authored
commit 74051165 upstream. We need to make sure camss_configure_pd() happens before camss_register_entities() as the vfe_get() path relies on the pointer provided by camss_configure_pd(). Fix the ordering sequence in probe to ensure the pointers vfe_get() demands are present by the time camss_register_entities() runs. In order to facilitate backporting to stable kernels I've moved the configure_pd() call pretty early on the probe() function so that irrespective of the existence of the old error handling jump labels this patch should still apply to -next circa Aug 2023 to v5.13 inclusive. Fixes: 2f6f8af6 ("media: camss: Refactor VFE power domain toggling") Cc: stable@vger.kernel.org Signed-off-by:
Bryan O'Donoghue <bryan.odonoghue@linaro.org> Reviewed-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by:
Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Victor Shih authored
commit 015c9cbc upstream. Due to a flaw in the hardware design, the GL9750 replay timer frequently times out when ASPM is enabled. As a result, the warning messages will often appear in the system log when the system accesses the GL9750 PCI config. Therefore, the replay timer timeout must be masked. Fixes: d7133797 ("mmc: sdhci-pci-gli: A workaround to allow GL9750 to enter ASPM L1.2") Signed-off-by:
Victor Shih <victor.shih@genesyslogic.com.tw> Acked-by:
Adrian Hunter <adrian.hunter@intel.com> Acked-by:
Kai-Heng Feng <kai.heng.geng@canonical.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20231107095741.8832-2-victorshihgli@gmail.com Signed-off-by:
Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
ChunHao Lin authored
commit 0ab0c45d upstream. For devices that support DASH, even DASH is disabled, there may still exist a default firmware that will influence device behavior. So driver needs to handle DASH for devices that support DASH, no matter the DASH status is. This patch also prepares for "fix network lost after resume on DASH systems". Fixes: ee7a1beb ("r8169:call "rtl8168_driver_start" "rtl8168_driver_stop" only when hardware dash function is enabled") Cc: stable@vger.kernel.org Signed-off-by:
ChunHao Lin <hau@realtek.com> Reviewed-by:
Heiner Kallweit <hkallweit1@gmail.com> Link: https://lore.kernel.org/r/20231109173400.4573-2-hau@realtek.com Signed-off-by:
Jakub Kicinski <kuba@kernel.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
ChunHao Lin authored
commit 868c3b95 upstream. Device that support DASH may be reseted or powered off during suspend. So driver needs to handle DASH during system suspend and resume. Or DASH firmware will influence device behavior and causes network lost. Fixes: b646d900 ("r8169: magic.") Cc: stable@vger.kernel.org Reviewed-by:
Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by:
ChunHao Lin <hau@realtek.com> Link: https://lore.kernel.org/r/20231109173400.4573-3-hau@realtek.com Signed-off-by:
Jakub Kicinski <kuba@kernel.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Paolo Abeni authored
commit 7679d34f upstream. The MPTCP implementation of the IP_TOS socket option uses the lockless variant of the TOS manipulation helper and does not hold such lock at the helper invocation time. Add the required locking. Fixes: ffcacff8 ("mptcp: Support for IP_TOS for MPTCP setsockopt()") Cc: stable@vger.kernel.org Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/457 Signed-off-by:
Paolo Abeni <pabeni@redhat.com> Reviewed-by:
Mat Martineau <martineau@kernel.org> Signed-off-by:
Matthieu Baerts <matttbe@kernel.org> Link: https://lore.kernel.org/r/20231114-upstream-net-20231113-mptcp-misc-fixes-6-7-rc2-v1-4-7b9cd6a7b7f4@kernel.org Signed-off-by:
Jakub Kicinski <kuba@kernel.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Geliang Tang authored
commit 8df220b2 upstream. This patch adds the validity check for sending RM_ADDRs for userspace PM in mptcp_pm_remove_addrs(), only send a RM_ADDR when the address is in the anno_list or conn_list. Fixes: 8b1c94da ("mptcp: only send RM_ADDR in nl_cmd_remove") Cc: stable@vger.kernel.org Signed-off-by:
Geliang Tang <geliang.tang@suse.com> Reviewed-by:
Mat Martineau <martineau@kernel.org> Signed-off-by:
Matthieu Baerts <matttbe@kernel.org> Link: https://lore.kernel.org/r/20231114-upstream-net-20231113-mptcp-misc-fixes-6-7-rc2-v1-3-7b9cd6a7b7f4@kernel.org Signed-off-by:
Jakub Kicinski <kuba@kernel.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-