- Jan 24, 2023
-
-
Maciej Żenczykowski authored
commit c6ec9295 upstream. In Google internal bug 265639009 we've received an (as yet) unreproducible crash report from an aarch64 GKI 5.10.149-android13 running device. AFAICT the source code is at: https://android.googlesource.com/kernel/common/+/refs/tags/ASB-2022-12-05_13-5.10 The call stack is: ncm_close() -> ncm_notify() -> ncm_do_notify() with the crash at: ncm_do_notify+0x98/0x270 Code: 79000d0b b9000a6c f940012a f9400269 (b9405d4b) Which I believe disassembles to (I don't know ARM assembly, but it looks sane enough to me...): // halfword (16-bit) store presumably to event->wLength (at offset 6 of struct usb_cdc_notification) 0B 0D 00 79 strh w11, [x8, #6] // word (32-bit) store presumably to req->Length (at offset 8 of struct usb_request) 6C 0A 00 B9 str w12, [x19, #8] // x10 (NULL) was read here from offset 0 of valid pointer x9 // IMHO we're reading 'cdev->gadget' and getting NULL // gadget is indeed at offset 0 of struct usb_composite_dev 2A 01 40 F9 ldr x10, [x9] // loading req->buf pointer, which is at offset 0 of struct usb_request 69 02 40 F9 ldr x9, [x19] // x10 is null, crash, appears to be attempt to read cdev->gadget->max_speed 4B 5D 40 B9 ldr w11, [x10, #0x5c] which seems to line up with ncm_do_notify() case NCM_NOTIFY_SPEED code fragment: event->wLength = cpu_to_le16(8); req->length = NCM_STATUS_BYTECOUNT; /* SPEED_CHANGE data is up/down speeds in bits/sec */ data = req->buf + sizeof *event; data[0] = cpu_to_le32(ncm_bitrate(cdev->gadget)); My analysis of registers and NULL ptr deref crash offset (Unable to handle kernel NULL pointer dereference at virtual address 000000000000005c) heavily suggests that the crash is due to 'cdev->gadget' being NULL when executing: data[0] = cpu_to_le32(ncm_bitrate(cdev->gadget)); which calls: ncm_bitrate(NULL) which then calls: gadget_is_superspeed(NULL) which reads ((struct usb_gadget *)NULL)->max_speed and hits a panic. AFAICT, if I'm counting right, the offset of max_speed is indeed 0x5C. (remember there's a GKI KABI reservation of 16 bytes in struct work_struct) It's not at all clear to me how this is all supposed to work... but returning 0 seems much better than panic-ing... Cc: Felipe Balbi <balbi@kernel.org> Cc: Lorenzo Colitti <lorenzo@google.com> Cc: Carlos Llamas <cmllamas@google.com> Cc: stable@vger.kernel.org Signed-off-by:
Maciej Żenczykowski <maze@google.com> Cc: stable <stable@kernel.org> Link: https://lore.kernel.org/r/20230117131839.1138208-1-maze@google.com Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Daniel Scally authored
commit e95765e9 upstream. Currently the color matching descriptor is only sent across the wire a single time, following the descriptors for each format and frame. According to the UVC 1.5 Specification 3.9.2.6 ("Color Matching Descriptors"): "Only one instance is allowed for a given format and if present, the Color Matching descriptor shall be placed following the Video and Still Image Frame descriptors for that format". Add another reference to the color matching descriptor after the yuyv frames so that it's correctly transmitted for that format too. Fixes: a9914127 ("USB gadget: Webcam device") Cc: stable <stable@kernel.org> Signed-off-by:
Daniel Scally <dan.scally@ideasonboard.com> Reviewed-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by:
Kieran Bingham <kieran.bingham@ideasonboard.com> Link: https://lore.kernel.org/r/20221216160528.479094-1-dan.scally@ideasonboard.com Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Alexander Stein authored
commit 5d3d01ae upstream. Commit ca07e1c1 ("drivers:usb:fsl:Make fsl ehci drv an independent driver module") changed DRV_NAME which was used for MODULE_ALIAS as well. Starting from this the module alias didn't match the platform device name created in fsl-mph-dr-of.c Change DRV_NAME to match the driver name for host mode in fsl-mph-dr-of. This is needed for module autoloading on ls1021a. Fixes: ca07e1c1 ("drivers:usb:fsl:Make fsl ehci drv an independent driver module") Cc: stable <stable@kernel.org> Signed-off-by:
Alexander Stein <alexander.stein@ew.tq-group.com> Link: https://lore.kernel.org/r/20230120122714.3848784-1-alexander.stein@ew.tq-group.com Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Michael Adler authored
commit 3f9e76e3 upstream. Add the USB serial console device ID for Siemens SCALANCE LPE-9000 which have a USB port for their serial console. Signed-off-by:
Michael Adler <michael.adler@siemens.com> Cc: stable@vger.kernel.org Signed-off-by:
Johan Hovold <johan@kernel.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Flavio Suligoi authored
commit 7171b0e2 upstream. The Texas Instruments TUSB8041 has an autosuspend problem at high temperature. If there is not USB traffic, after a couple of ms, the device enters in autosuspend mode. In this condition the external clock stops working, to save energy. When the USB activity turns on, ther hub exits the autosuspend state, the clock starts running again and all works fine. At ambient temperature all works correctly, but at high temperature, when the USB activity turns on, the external clock doesn't restart and the hub disappears from the USB bus. Disabling the autosuspend mode for this hub solves the issue. Signed-off-by:
Flavio Suligoi <f.suligoi@asem.it> Cc: stable <stable@kernel.org> Acked-by:
Alan Stern <stern@rowland.harvard.edu> Link: https://lore.kernel.org/r/20221219124759.3207032-1-f.suligoi@asem.it Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Greg Kroah-Hartman authored
commit 14ff7460 upstream. The USB_DEVICE_ID_CODEMERCS_IOW100 header size was incorrect, it should be 12, not 13. Cc: stable <stable@kernel.org> Fixes: 17a82716 ("USB: iowarrior: fix up report size handling for some devices") Reported-by:
Christoph Jung <jung@codemercs.com> Link: https://lore.kernel.org/r/20230120135330.3842518-1-gregkh@linuxfoundation.org Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Duke Xin(辛安文) authored
commit 71dfd381 upstream. The EM05CN modem has 2 USB configurations that are configurable via the AT command AT+QCFG="usbnet",[ 0 | 2 ] which make the modem enumerate with the following interfaces, respectively: "MBIM" : AT + MBIM + DIAG + NMEA + MODEM "RMNET" : AT + DIAG + NMEA + Modem + QMI The detailed description of the USB configuration for each mode as follows: MBIM Mode -------------- T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=2c7c ProdID=0312 Rev= 3.18 S: Manufacturer=Quectel S: Product=Quectel EM05-CN C:* #Ifs= 6 Cfg#= 1 Atr=a0 MxPwr=500mA A: FirstIf#= 1 IfCount= 2 Cls=02(comm.) Sub=0e Prot=00 I:* If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=83(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=85(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 5 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=87(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 1 Cls=02(comm.) Sub=0e Prot=00 Driver=cdc_mbim E: Ad=89(I) Atr=03(Int.) MxPS= 64 Ivl=32ms I: If#= 2 Alt= 0 #EPs= 0 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim I:* If#= 2 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim E: Ad=88(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms RMNET Mode -------------- T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 3 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=2c7c ProdID=0312 Rev= 3.18 S: Manufacturer=Quectel S: Product=Quectel EM05-CN C:* #Ifs= 5 Cfg#= 1 Atr=a0 MxPwr=500mA I:* If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=83(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=85(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 5 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=87(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 6 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) E: Ad=89(I) Atr=03(Int.) MxPS= 8 Ivl=32ms E: Ad=88(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms Signed-off-by:
Duke Xin(辛安文) <duke_xinanwen@163.com> Cc: stable@vger.kernel.org Signed-off-by:
Johan Hovold <johan@kernel.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Duke Xin(辛安文) authored
commit 1541dd00 upstream. The EM05CN (SG) modem has 2 USB configurations that are configurable via the AT command AT+QCFG="usbnet",[ 0 | 2 ] which make the modem enumerate with the following interfaces, respectively: "MBIM" : AT + MBIM + DIAG + NMEA + MODEM "RMNET" : AT + DIAG + NMEA + Modem + QMI The detailed description of the USB configuration for each mode as follows: MBIM Mode -------------- T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=2c7c ProdID=0310 Rev= 3.18 S: Manufacturer=Quectel S: Product=Quectel EM05-CN C:* #Ifs= 6 Cfg#= 1 Atr=a0 MxPwr=500mA A: FirstIf#= 1 IfCount= 2 Cls=02(comm.) Sub=0e Prot=00 I:* If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=83(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=85(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 5 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=87(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 1 Cls=02(comm.) Sub=0e Prot=00 Driver=cdc_mbim E: Ad=89(I) Atr=03(Int.) MxPS= 64 Ivl=32ms I: If#= 2 Alt= 0 #EPs= 0 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim I:* If#= 2 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim E: Ad=88(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms RMNET Mode -------------- T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 3 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=2c7c ProdID=0310 Rev= 3.18 S: Manufacturer=Quectel S: Product=Quectel EM05-CN C:* #Ifs= 5 Cfg#= 1 Atr=a0 MxPwr=500mA I:* If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=83(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=85(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 5 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=87(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 6 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) E: Ad=89(I) Atr=03(Int.) MxPS= 8 Ivl=32ms E: Ad=88(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms Signed-off-by:
Duke Xin(辛安文) <duke_xinanwen@163.com> Cc: stable@vger.kernel.org Signed-off-by:
Johan Hovold <johan@kernel.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Ali Mirghasemi authored
commit d9bbb158 upstream. Add support for EC200U modem 0x0901: EC200U - AT + AP + CP + NMEA + DIAG + MOS usb-device output: T: Bus=01 Lev=02 Prnt=02 Port=02 Cnt=01 Dev#= 4 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=2c7c ProdID=0901 Rev= 3.18 S: Manufacturer=Android S: Product=Android C:* #Ifs= 9 Cfg#= 1 Atr=e0 MxPwr=400mA A: FirstIf#= 0 IfCount= 2 Cls=02(comm.) Sub=06 Prot=00 I:* If#= 0 Alt= 0 #EPs= 1 Cls=02(comm.) Sub=06 Prot=00 Driver=cdc_ether E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=32ms I: If#= 1 Alt= 0 #EPs= 0 Cls=0a(data ) Sub=00 Prot=00 Driver=cdc_ether I:* If#= 1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=cdc_ether E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=83(I) Atr=03(Int.) MxPS= 512 Ivl=4096ms I:* If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 4 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 6 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=88(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=06(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 7 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=8a(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=07(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=89(I) Atr=03(Int.) MxPS= 512 Ivl=4096ms I:* If#= 8 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=8b(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=08(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms Signed-off-by:
Ali Mirghasemi <ali.mirghasemi1376@gmail.com> Cc: stable@vger.kernel.org Signed-off-by:
Johan Hovold <johan@kernel.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Duke Xin(辛安文) authored
commit b72d1397 upstream. The EM05-G (RS) modem has 2 USB configurations that are configurable via the AT command AT+QCFG="usbnet",[ 0 | 2 ] which make the modem enumerate with the following interfaces, respectively: "RMNET" : AT + DIAG + NMEA + Modem + QMI "MBIM" : MBIM + AT + DIAG + NMEA + Modem The detailed description of the USB configuration for each mode as follows: RMNET Mode -------------- T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 21 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=2c7c ProdID=0314 Rev= 3.18 S: Manufacturer=Quectel S: Product=Quectel EM05-G C:* #Ifs= 5 Cfg#= 1 Atr=a0 MxPwr=500mA I:* If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=83(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=85(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 5 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=87(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 6 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) E: Ad=89(I) Atr=03(Int.) MxPS= 8 Ivl=32ms E: Ad=88(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms MBIM Mode -------------- T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 16 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=2c7c ProdID=0314 Rev= 3.18 S: Manufacturer=Quectel S: Product=Quectel EM05-G C:* #Ifs= 6 Cfg#= 1 Atr=a0 MxPwr=500mA A: FirstIf#= 0 IfCount= 2 Cls=02(comm.) Sub=0e Prot=00 I:* If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=83(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=85(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 5 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=87(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 0 Alt= 0 #EPs= 1 Cls=02(comm.) Sub=0e Prot=00 Driver=cdc_mbim E: Ad=89(I) Atr=03(Int.) MxPS= 64 Ivl=32ms I: If#= 1 Alt= 0 #EPs= 0 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim I:* If#= 1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim E: Ad=88(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms Signed-off-by:
Duke Xin(辛安文) <duke_xinanwen@163.com> Cc: stable@vger.kernel.org Signed-off-by:
Johan Hovold <johan@kernel.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Duke Xin(辛安文) authored
commit bb78654b upstream. The EM05-G (CS) modem has 2 USB configurations that are configurable via the AT command AT+QCFG="usbnet",[ 0 | 2 ] which make the modem enumerate with the following interfaces, respectively: "RMNET" : AT + DIAG + NMEA + Modem + QMI "MBIM" : MBIM + AT + DIAG + NMEA + Modem The detailed description of the USB configuration for each mode as follows: RMNET Mode -------------- T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 21 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=2c7c ProdID=030C Rev= 3.18 S: Manufacturer=Quectel S: Product=Quectel EM05-G C:* #Ifs= 5 Cfg#= 1 Atr=a0 MxPwr=500mA I:* If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=83(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=85(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 5 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=87(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 6 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) E: Ad=89(I) Atr=03(Int.) MxPS= 8 Ivl=32ms E: Ad=88(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms MBIM Mode -------------- T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 16 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=2c7c ProdID=030C Rev= 3.18 S: Manufacturer=Quectel S: Product=Quectel EM05-G C:* #Ifs= 6 Cfg#= 1 Atr=a0 MxPwr=500mA A: FirstIf#= 0 IfCount= 2 Cls=02(comm.) Sub=0e Prot=00 I:* If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=83(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=85(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 5 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=87(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 0 Alt= 0 #EPs= 1 Cls=02(comm.) Sub=0e Prot=00 Driver=cdc_mbim E: Ad=89(I) Atr=03(Int.) MxPS= 64 Ivl=32ms I: If#= 1 Alt= 0 #EPs= 0 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim I:* If#= 1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim E: Ad=88(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms Signed-off-by:
Duke Xin(辛安文) <duke_xinanwen@163.com> Cc: stable@vger.kernel.org Signed-off-by:
Johan Hovold <johan@kernel.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Duke Xin(辛安文) authored
commit 6c331f32 upstream. The EM05-G (GR) modem has 2 USB configurations that are configurable via the AT command AT+QCFG="usbnet",[ 0 | 2 ] which make the modem enumerate with the following interfaces, respectively: "RMNET" : AT + DIAG + NMEA + Modem + QMI "MBIM" : MBIM + AT + DIAG + NMEA + Modem The detailed description of the USB configuration for each mode as follows: RMNET Mode -------------- T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 21 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=2c7c ProdID=0313 Rev= 3.18 S: Manufacturer=Quectel S: Product=Quectel EM05-G C:* #Ifs= 5 Cfg#= 1 Atr=a0 MxPwr=500mA I:* If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=83(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=85(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 5 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=87(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 6 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) E: Ad=89(I) Atr=03(Int.) MxPS= 8 Ivl=32ms E: Ad=88(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms MBIM Mode -------------- T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 16 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=2c7c ProdID=0313 Rev= 3.18 S: Manufacturer=Quectel S: Product=Quectel EM05-G C:* #Ifs= 6 Cfg#= 1 Atr=a0 MxPwr=500mA A: FirstIf#= 0 IfCount= 2 Cls=02(comm.) Sub=0e Prot=00 I:* If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=83(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=85(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 5 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=87(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 0 Alt= 0 #EPs= 1 Cls=02(comm.) Sub=0e Prot=00 Driver=cdc_mbim E: Ad=89(I) Atr=03(Int.) MxPS= 64 Ivl=32ms I: If#= 1 Alt= 0 #EPs= 0 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim I:* If#= 1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim E: Ad=88(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms Signed-off-by:
Duke Xin(辛安文) <duke_xinanwen@163.com> Cc: stable@vger.kernel.org Signed-off-by:
Johan Hovold <johan@kernel.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Greg Kroah-Hartman authored
commit 73979060 upstream. do_prlimit() adds the user-controlled resource value to a pointer that will subsequently be dereferenced. In order to help prevent this codepath from being used as a spectre "gadget" a barrier needs to be added after checking the range. Reported-by:
Jordy Zomer <jordyzomer@google.com> Tested-by:
Jordy Zomer <jordyzomer@google.com> Suggested-by:
Linus Torvalds <torvalds@linuxfoundation.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Jimmy Hu authored
commit e8fb5bc7 upstream. When the host controller is not responding, all URBs queued to all endpoints need to be killed. This can cause a kernel panic if we dereference an invalid endpoint. Fix this by using xhci_get_virt_ep() helper to find the endpoint and checking if the endpoint is valid before dereferencing it. [233311.853271] xhci-hcd xhci-hcd.1.auto: xHCI host controller not responding, assume dead [233311.853393] Unable to handle kernel NULL pointer dereference at virtual address 00000000000000e8 [233311.853964] pc : xhci_hc_died+0x10c/0x270 [233311.853971] lr : xhci_hc_died+0x1ac/0x270 [233311.854077] Call trace: [233311.854085] xhci_hc_died+0x10c/0x270 [233311.854093] xhci_stop_endpoint_command_watchdog+0x100/0x1a4 [233311.854105] call_timer_fn+0x50/0x2d4 [233311.854112] expire_timers+0xac/0x2e4 [233311.854118] run_timer_softirq+0x300/0xabc [233311.854127] __do_softirq+0x148/0x528 [233311.854135] irq_exit+0x194/0x1a8 [233311.854143] __handle_domain_irq+0x164/0x1d0 [233311.854149] gic_handle_irq.22273+0x10c/0x188 [233311.854156] el1_irq+0xfc/0x1a8 [233311.854175] lpm_cpuidle_enter+0x25c/0x418 [msm_pm] [233311.854185] cpuidle_enter_state+0x1f0/0x764 [233311.854194] do_idle+0x594/0x6ac [233311.854201] cpu_startup_entry+0x7c/0x80 [233311.854209] secondary_start_kernel+0x170/0x198 Fixes: 50e8725e ("xhci: Refactor command watchdog and fix split string.") Cc: stable@vger.kernel.org Signed-off-by:
Jimmy Hu <hhhuuu@google.com> Signed-off-by:
Mathias Nyman <mathias.nyman@linux.intel.com> Message-ID: <0fe978ed-8269-9774-1c40-f8a98c17e838@linux.intel.com> Link: https://lore.kernel.org/r/20230116142216.1141605-3-mathias.nyman@linux.intel.com Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Ricardo Ribalda authored
commit 93915a41 upstream. Allow devices to have dma operations beyond 64K, and avoid warnings such as: xhci_hcd 0000:00:14.0: mapping sg segment longer than device claims to support [len=98304] [max=65536] Cc: stable@vger.kernel.org Cc: Takashi Iwai <tiwai@suse.de> Signed-off-by:
Ricardo Ribalda <ribalda@chromium.org> Signed-off-by:
Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20230116142216.1141605-2-mathias.nyman@linux.intel.com Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Ryusuke Konishi authored
commit 7633355e upstream. If nilfs2 reads a corrupted disk image and tries to reads a b-tree node block by calling __nilfs_btree_get_block() against an invalid virtual block address, it returns -ENOENT because conversion of the virtual block address to a disk block address fails. However, this return value is the same as the internal code that b-tree lookup routines return to indicate that the block being searched does not exist, so functions that operate on that b-tree may misbehave. When nilfs_btree_insert() receives this spurious 'not found' code from nilfs_btree_do_lookup(), it misunderstands that the 'not found' check was successful and continues the insert operation using incomplete lookup path data, causing the following crash: general protection fault, probably for non-canonical address 0xdffffc0000000005: 0000 [#1] PREEMPT SMP KASAN KASAN: null-ptr-deref in range [0x0000000000000028-0x000000000000002f] ... RIP: 0010:nilfs_btree_get_nonroot_node fs/nilfs2/btree.c:418 [inline] RIP: 0010:nilfs_btree_prepare_insert fs/nilfs2/btree.c:1077 [inline] RIP: 0010:nilfs_btree_insert+0x6d3/0x1c10 fs/nilfs2/btree.c:1238 Code: bc 24 80 00 00 00 4c 89 f8 48 c1 e8 03 42 80 3c 28 00 74 08 4c 89 ff e8 4b 02 92 fe 4d 8b 3f 49 83 c7 28 4c 89 f8 48 c1 e8 03 <42> 80 3c 28 00 74 08 4c 89 ff e8 2e 02 92 fe 4d 8b 3f 49 83 c7 02 ... Call Trace: <TASK> nilfs_bmap_do_insert fs/nilfs2/bmap.c:121 [inline] nilfs_bmap_insert+0x20d/0x360 fs/nilfs2/bmap.c:147 nilfs_get_block+0x414/0x8d0 fs/nilfs2/inode.c:101 __block_write_begin_int+0x54c/0x1a80 fs/buffer.c:1991 __block_write_begin fs/buffer.c:2041 [inline] block_write_begin+0x93/0x1e0 fs/buffer.c:2102 nilfs_write_begin+0x9c/0x110 fs/nilfs2/inode.c:261 generic_perform_write+0x2e4/0x5e0 mm/filemap.c:3772 __generic_file_write_iter+0x176/0x400 mm/filemap.c:3900 generic_file_write_iter+0xab/0x310 mm/filemap.c:3932 call_write_iter include/linux/fs.h:2186 [inline] new_sync_write fs/read_write.c:491 [inline] vfs_write+0x7dc/0xc50 fs/read_write.c:584 ksys_write+0x177/0x2a0 fs/read_write.c:637 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x3d/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd ... </TASK> This patch fixes the root cause of this problem by replacing the error code that __nilfs_btree_get_block() returns on block address conversion failure from -ENOENT to another internal code -EINVAL which means that the b-tree metadata is corrupted. By returning -EINVAL, it propagates without glitches, and for all relevant b-tree operations, functions in the upper bmap layer output an error message indicating corrupted b-tree metadata via nilfs_bmap_convert_error(), and code -EIO will be eventually returned as it should be. Link: https://lkml.kernel.org/r/000000000000bd89e205f0e38355@google.com Link: https://lkml.kernel.org/r/20230105055356.8811-1-konishi.ryusuke@gmail.com Signed-off-by:
Ryusuke Konishi <konishi.ryusuke@gmail.com> Reported-by:
<syzbot+ede796cecd5296353515@syzkaller.appspotmail.com> Tested-by:
Ryusuke Konishi <konishi.ryusuke@gmail.com> Cc: <stable@vger.kernel.org> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Jaegeuk Kim authored
[ Upstream commit df9d44b6 ] This patch avoids the below panic. pc : __lookup_extent_tree+0xd8/0x760 lr : f2fs_do_write_data_page+0x104/0x87c sp : ffffffc010cbb3c0 x29: ffffffc010cbb3e0 x28: 0000000000000000 x27: ffffff8803e7f020 x26: ffffff8803e7ed40 x25: ffffff8803e7f020 x24: ffffffc010cbb460 x23: ffffffc010cbb480 x22: 0000000000000000 x21: 0000000000000000 x20: ffffffff22e90900 x19: 0000000000000000 x18: ffffffc010c5d080 x17: 0000000000000000 x16: 0000000000000020 x15: ffffffdb1acdbb88 x14: ffffff888759e2b0 x13: 0000000000000000 x12: ffffff802da49000 x11: 000000000a001200 x10: ffffff8803e7ed40 x9 : ffffff8023195800 x8 : ffffff802da49078 x7 : 0000000000000001 x6 : 0000000000000000 x5 : 0000000000000006 x4 : ffffffc010cbba28 x3 : 0000000000000000 x2 : ffffffc010cbb480 x1 : 0000000000000000 x0 : ffffff8803e7ed40 Call trace: __lookup_extent_tree+0xd8/0x760 f2fs_do_write_data_page+0x104/0x87c f2fs_write_single_data_page+0x420/0xb60 f2fs_write_cache_pages+0x418/0xb1c __f2fs_write_data_pages+0x428/0x58c f2fs_write_data_pages+0x30/0x40 do_writepages+0x88/0x190 __writeback_single_inode+0x48/0x448 writeback_sb_inodes+0x468/0x9e8 __writeback_inodes_wb+0xb8/0x2a4 wb_writeback+0x33c/0x740 wb_do_writeback+0x2b4/0x400 wb_workfn+0xe4/0x34c process_one_work+0x24c/0x5bc worker_thread+0x3e8/0xa50 kthread+0x150/0x1b4 Signed-off-by:
Jaegeuk Kim <jaegeuk@kernel.org> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Jiri Slaby (SUSE) authored
[ Upstream commit 56c5dab2 ] Since gcc13, each member of an enum has the same type as the enum [1]. And that is inherited from its members. Provided these two: SRP_TAG_NO_REQ = ~0U, SRP_TAG_TSK_MGMT = 1U << 31 all other members are unsigned ints. Esp. with SRP_MAX_SGE and SRP_TSK_MGMT_SQ_SIZE and their use in min(), this results in the following warnings: include/linux/minmax.h:20:35: error: comparison of distinct pointer types lacks a cast drivers/infiniband/ulp/srp/ib_srp.c:563:42: note: in expansion of macro 'min' include/linux/minmax.h:20:35: error: comparison of distinct pointer types lacks a cast drivers/infiniband/ulp/srp/ib_srp.c:2369:27: note: in expansion of macro 'min' So move the large values away to a separate enum, so that they don't affect other members. [1] https://gcc.gnu.org/bugzilla/show_bug.cgi?id=36113 Link: https://lore.kernel.org/r/20221212120411.13750-1-jirislaby@kernel.org Signed-off-by:
Jiri Slaby (SUSE) <jirislaby@kernel.org> Reviewed-by:
Bart Van Assche <bvanassche@acm.org> Signed-off-by:
Leon Romanovsky <leon@kernel.org> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Daniil Tatianin authored
[ Upstream commit 9deb1e9f ] It's not very useful to copy back an empty ethtool_stats struct and return 0 if we didn't actually have any stats. This also allows for further simplification of this function in the future commits. Signed-off-by:
Daniil Tatianin <d-tatianin@yandex-team.ru> Reviewed-by:
Andrew Lunn <andrew@lunn.ch> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Olga Kornievskaia authored
[ Upstream commit a6b9d2fa ] When there is a single DS no striping constraints need to be placed on the IO. When such constraint is applied then buffered reads don't coalesce to the DS's rsize. Signed-off-by:
Olga Kornievskaia <kolga@netapp.com> Signed-off-by:
Trond Myklebust <trond.myklebust@hammerspace.com> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
- Jan 18, 2023
-
-
Greg Kroah-Hartman authored
Link: https://lore.kernel.org/r/20230116154820.689115727@linuxfoundation.org Tested-by:
Jon Hunter <jonathanh@nvidia.com> Tested-by:
Linux Kernel Functional Testing <lkft@linaro.org> Tested-by:
Guenter Roeck <linux@roeck-us.net> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Ferry Toth authored
commit b659b613 upstream. This reverts commit 8a7b31d5. This patch results in some qemu test failures, specifically xilinx-zynq-a9 machine and zynq-zc702 as well as zynq-zed devicetree files, when trying to boot from USB drive. Link: https://lore.kernel.org/lkml/20221220194334.GA942039@roeck-us.net/ Fixes: 8a7b31d5 ("usb: ulpi: defer ulpi_register on ulpi_read_id timeout") Cc: stable@vger.kernel.org Reported-by:
Guenter Roeck <linux@roeck-us.net> Signed-off-by:
Ferry Toth <ftoth@exalondelft.nl> Link: https://lore.kernel.org/r/20221222205302.45761-1-ftoth@exalondelft.nl Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Minsuk Kang authored
[ Upstream commit 9dab880d ] Fix a use-after-free that occurs in hcd when in_urb sent from pn533_usb_send_frame() is completed earlier than out_urb. Its callback frees the skb data in pn533_send_async_complete() that is used as a transfer buffer of out_urb. Wait before sending in_urb until the callback of out_urb is called. To modify the callback of out_urb alone, separate the complete function of out_urb and ack_urb. Found by a modified version of syzkaller. BUG: KASAN: use-after-free in dummy_timer Call Trace: memcpy (mm/kasan/shadow.c:65) dummy_perform_transfer (drivers/usb/gadget/udc/dummy_hcd.c:1352) transfer (drivers/usb/gadget/udc/dummy_hcd.c:1453) dummy_timer (drivers/usb/gadget/udc/dummy_hcd.c:1972) arch_static_branch (arch/x86/include/asm/jump_label.h:27) static_key_false (include/linux/jump_label.h:207) timer_expire_exit (include/trace/events/timer.h:127) call_timer_fn (kernel/time/timer.c:1475) expire_timers (kernel/time/timer.c:1519) __run_timers (kernel/time/timer.c:1790) run_timer_softirq (kernel/time/timer.c:1803) Fixes: c46ee386 ("NFC: pn533: add NXP pn533 nfc device driver") Signed-off-by:
Minsuk Kang <linuxlovemin@yonsei.ac.kr> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Roger Pau Monne authored
[ Upstream commit c0dccad8 ] The currently lockless access to the xen console list in vtermno_to_xencons() is incorrect, as additions and removals from the list can happen anytime, and as such the traversal of the list to get the private console data for a given termno needs to happen with the lock held. Note users that modify the list already do so with the lock taken. Adjust current lock takers to use the _irq{save,restore} helpers, since the context in which vtermno_to_xencons() is called can have interrupts disabled. Use the _irq{save,restore} set of helpers to switch the current callers to disable interrupts in the locked region. I haven't checked if existing users could instead use the _irq variant, as I think it's safer to use _irq{save,restore} upfront. While there switch from using list_for_each_entry_safe to list_for_each_entry: the current entry cursor won't be removed as part of the code in the loop body, so using the _safe variant is pointless. Fixes: 02e19f9c ('hvc_xen: implement multiconsole support') Signed-off-by:
Roger Pau Monné <roger.pau@citrix.com> Reviewed-by:
Stefano Stabellini <sstabellini@kernel.org> Link: https://lore.kernel.org/r/20221130163611.14686-1-roger.pau@citrix.com Signed-off-by:
Juergen Gross <jgross@suse.com> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Ricardo Ribalda authored
[ Upstream commit 02228f6a ] If the system does not come from reset (like when it is kexec()), the regulator might have an IRQ waiting for us. If we enable the IRQ handler before its structures are ready, we crash. This patch fixes: [ 1.141839] Unable to handle kernel read from unreadable memory at virtual address 0000000000000078 [ 1.316096] Call trace: [ 1.316101] blocking_notifier_call_chain+0x20/0xa8 [ 1.322757] cpu cpu0: dummy supplies not allowed for exclusive requests [ 1.327823] regulator_notifier_call_chain+0x1c/0x2c [ 1.327825] da9211_irq_handler+0x68/0xf8 [ 1.327829] irq_thread+0x11c/0x234 [ 1.327833] kthread+0x13c/0x154 Signed-off-by:
Ricardo Ribalda <ribalda@chromium.org> Reviewed-by:
Adam Ward <DLG-Adam.Ward.opensource@dm.renesas.com> Link: https://lore.kernel.org/r/20221124-da9211-v2-0-1779e3c5d491@chromium.org Signed-off-by:
Mark Brown <broonie@kernel.org> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Eliav Farber authored
commit e8407743 upstream. Fix period calculation in case user sets a value of 1000. The input of round_jiffies_relative() should be in jiffies and not in milli-seconds. [ bp: Use the same code pattern as in edac_device_workq_setup() for clarity. ] Fixes: c4cf3b45 ("EDAC: Rework workqueue handling") Signed-off-by:
Eliav Farber <farbere@amazon.com> Signed-off-by:
Borislav Petkov (AMD) <bp@alien8.de> Cc: <stable@kernel.org> Link: https://lore.kernel.org/r/20221020124458.22153-1-farbere@amazon.com Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Peter Zijlstra authored
commit 7c6dd961 upstream. With 'GNU assembler (GNU Binutils for Debian) 2.39.90.20221231' the build now reports: arch/x86/realmode/rm/../../boot/bioscall.S: Assembler messages: arch/x86/realmode/rm/../../boot/bioscall.S:35: Warning: found `movsd'; assuming `movsl' was meant arch/x86/realmode/rm/../../boot/bioscall.S:70: Warning: found `movsd'; assuming `movsl' was meant arch/x86/boot/bioscall.S: Assembler messages: arch/x86/boot/bioscall.S:35: Warning: found `movsd'; assuming `movsl' was meant arch/x86/boot/bioscall.S:70: Warning: found `movsd'; assuming `movsl' was meant Which is due to: PR gas/29525 Note that with the dropped CMPSD and MOVSD Intel Syntax string insn templates taking operands, mixed IsString/non-IsString template groups (with memory operands) cannot occur anymore. With that maybe_adjust_templates() becomes unnecessary (and is hence being removed). More details: https://sourceware.org/bugzilla/show_bug.cgi?id=29525 Borislav Petkov further explains: " the particular problem here is is that the 'd' suffix is "conflicting" in the sense that you can have SSE mnemonics like movsD %xmm... and the same thing also for string ops (which is the case here) so apparently the agreement in binutils land is to use the always accepted suffixes 'l' or 'q' and phase out 'd' slowly... " Fixes: 7a734e7d ("x86, setup: "glove box" BIOS calls -- infrastructure") Signed-off-by:
Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by:
Ingo Molnar <mingo@kernel.org> Acked-by:
Borislav Petkov (AMD) <bp@alien8.de> Link: https://lore.kernel.org/r/Y71I3Ex2pvIxMpsP@hirez.programming.kicks-ass.net Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Gavrilov Ilia authored
commit 9ea4b476 upstream. When first_ip is 0, last_ip is 0xFFFFFFFF, and netmask is 31, the value of an arithmetic expression 2 << (netmask - mask_bits - 1) is subject to overflow due to a failure casting operands to a larger data type before performing the arithmetic. Note that it's harmless since the value will be checked at the next step. Found by InfoTeCS on behalf of Linux Verification Center (linuxtesting.org) with SVACE. Fixes: b9fed748 ("netfilter: ipset: Check and reject crazy /0 input parameters") Signed-off-by:
Ilia.Gavrilov <Ilia.Gavrilov@infotecs.ru> Reviewed-by:
Simon Horman <simon.horman@corigine.com> Signed-off-by:
Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Herbert Xu authored
commit cb3e9864 upstream. The total cork length created by ip6_append_data includes extension headers, so we must exclude them when comparing them against the IPV6_CHECKSUM offset which does not include extension headers. Reported-by:
Kyle Zeng <zengyhkyle@gmail.com> Fixes: 357b40a1 ("[IPV6]: IPV6_CHECKSUM socket option can corrupt kernel memory") Signed-off-by:
Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Hans de Goede authored
commit ad75bd85 upstream. The 0x153 version of the kbd backlight control SNC handle has no separate address to probe if the backlight is there. This turns the probe call into a set keyboard backlight call with a value of 0 turning off the keyboard backlight. Skip probing when there is no separate probe address to avoid this. Link: https://bugzilla.redhat.com/show_bug.cgi?id=1583752 Fixes: 800f2017 ("Keyboard backlight control for some Vaio Fit models") Signed-off-by:
Hans de Goede <hdegoede@redhat.com> Reviewed-by:
Mattia Dongili <malattia@linux.it> Link: https://lore.kernel.org/r/20221213122943.11123-1-hdegoede@redhat.com Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Clement Lecigne authored
[ Note: this is a fix that works around the bug equivalently as the two upstream commits: 1fa4445f ("ALSA: control - introduce snd_ctl_notify_one() helper") 56b88b50 ("ALSA: pcm: Move rwsem lock inside snd_ctl_elem_read to prevent UAF") but in a simpler way to fit with older stable trees -- tiwai ] Add missing locking in ctl_elem_read_user/ctl_elem_write_user which can be easily triggered and turned into an use-after-free. Example code paths with SNDRV_CTL_IOCTL_ELEM_READ: 64-bits: snd_ctl_ioctl snd_ctl_elem_read_user [takes controls_rwsem] snd_ctl_elem_read [lock properly held, all good] [drops controls_rwsem] 32-bits (compat): snd_ctl_ioctl_compat snd_ctl_elem_write_read_compat ctl_elem_write_read snd_ctl_elem_read [missing lock, not good] CVE-2023-0266 was assigned for this issue. Signed-off-by:
Clement Lecigne <clecigne@google.com> Cc: stable@kernel.org # 5.12 and older Signed-off-by:
Takashi Iwai <tiwai@suse.de> Reviewed-by:
Jaroslav Kysela <perex@perex.cz> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Paolo Abeni authored
commit 2c02d41d upstream. When an ULP-enabled socket enters the LISTEN status, the listener ULP data pointer is copied inside the child/accepted sockets by sk_clone_lock(). The relevant ULP can take care of de-duplicating the context pointer via the clone() operation, but only MPTCP and SMC implement such op. Other ULPs may end-up with a double-free at socket disposal time. We can't simply clear the ULP data at clone time, as TLS replaces the socket ops with custom ones assuming a valid TLS ULP context is available. Instead completely prevent clone-less ULP sockets from entering the LISTEN status. Fixes: 734942cc ("tcp: ULP infrastructure") Reported-by:
slipper <slipper.alive@gmail.com> Signed-off-by:
Paolo Abeni <pabeni@redhat.com> Link: https://lore.kernel.org/r/4b80c3d1dbe3d0ab072f80450c202d9bc88b4b03.1672740602.git.pabeni@redhat.com Signed-off-by:
Jakub Kicinski <kuba@kernel.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Heiko Carstens authored
commit e3f360db upstream. Make sure that *ptr__ within arch_this_cpu_to_op_simple() is only dereferenced once by using READ_ONCE(). Otherwise the compiler could generate incorrect code. Cc: <stable@vger.kernel.org> Reviewed-by:
Alexander Gordeev <agordeev@linux.ibm.com> Signed-off-by:
Heiko Carstens <hca@linux.ibm.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Adrian Hunter authored
commit cf129830 upstream. When a match has been made to the nth duplicate symbol, return success not error. Example: Before: $ cat file.c cat: file.c: No such file or directory $ cat file1.c #include <stdio.h> static void func(void) { printf("First func\n"); } void other(void); int main() { func(); other(); return 0; } $ cat file2.c #include <stdio.h> static void func(void) { printf("Second func\n"); } void other(void) { func(); } $ gcc -Wall -Wextra -o test file1.c file2.c $ perf record -e intel_pt//u --filter 'filter func @ ./test' -- ./test Multiple symbols with name 'func' #1 0x1149 l func which is near main #2 0x1179 l func which is near other Disambiguate symbol name by inserting #n after the name e.g. func #2 Or select a global symbol by inserting #0 or #g or #G Failed to parse address filter: 'filter func @ ./test' Filter format is: filter|start|stop|tracestop <start symbol or address> [/ <end symbol or size>] [@<file name>] Where multiple filters are separated by space or comma. $ perf record -e intel_pt//u --filter 'filter func #2 @ ./test' -- ./test Failed to parse address filter: 'filter func #2 @ ./test' Filter format is: filter|start|stop|tracestop <start symbol or address> [/ <end symbol or size>] [@<file name>] Where multiple filters are separated by space or comma. After: $ perf record -e intel_pt//u --filter 'filter func #2 @ ./test' -- ./test First func Second func [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.016 MB perf.data ] $ perf script --itrace=b -Ftime,flags,ip,sym,addr --ns 1231062.526977619: tr strt 0 [unknown] => 558495708179 func 1231062.526977619: tr end call 558495708188 func => 558495708050 _init 1231062.526979286: tr strt 0 [unknown] => 55849570818d func 1231062.526979286: tr end return 55849570818f func => 55849570819d other Fixes: 1b36c03e ("perf record: Add support for using symbols in address filters") Reported-by:
Dmitrii Dolgov <9erthalion6@gmail.com> Signed-off-by:
Adrian Hunter <adrian.hunter@intel.com> Tested-by:
Dmitry Dolgov <9erthalion6@gmail.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20230110185659.15979-1-adrian.hunter@intel.com Signed-off-by:
Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Jonathan Corbet authored
commit 0283189e upstream. Sphinx 6.0 removed the execfile_() function, which we use as part of the configuration process. They *did* warn us... Just open-code the functionality as is done in Sphinx itself. Tested (using SPHINX_CONF, since this code is only executed with an alternative config file) on various Sphinx versions from 2.5 through 6.0. Reported-by:
Martin Liška <mliska@suse.cz> Cc: stable@vger.kernel.org Signed-off-by:
Jonathan Corbet <corbet@lwn.net> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Frederick Lawler authored
commit 96398560 upstream. While experimenting with applying noqueue to a classful queue discipline, we discovered a NULL pointer dereference in the __dev_queue_xmit() path that generates a kernel OOPS: # dev=enp0s5 # tc qdisc replace dev $dev root handle 1: htb default 1 # tc class add dev $dev parent 1: classid 1:1 htb rate 10mbit # tc qdisc add dev $dev parent 1:1 handle 10: noqueue # ping -I $dev -w 1 -c 1 1.1.1.1 [ 2.172856] BUG: kernel NULL pointer dereference, address: 0000000000000000 [ 2.173217] #PF: supervisor instruction fetch in kernel mode ... [ 2.178451] Call Trace: [ 2.178577] <TASK> [ 2.178686] htb_enqueue+0x1c8/0x370 [ 2.178880] dev_qdisc_enqueue+0x15/0x90 [ 2.179093] __dev_queue_xmit+0x798/0xd00 [ 2.179305] ? _raw_write_lock_bh+0xe/0x30 [ 2.179522] ? __local_bh_enable_ip+0x32/0x70 [ 2.179759] ? ___neigh_create+0x610/0x840 [ 2.179968] ? eth_header+0x21/0xc0 [ 2.180144] ip_finish_output2+0x15e/0x4f0 [ 2.180348] ? dst_output+0x30/0x30 [ 2.180525] ip_push_pending_frames+0x9d/0xb0 [ 2.180739] raw_sendmsg+0x601/0xcb0 [ 2.180916] ? _raw_spin_trylock+0xe/0x50 [ 2.181112] ? _raw_spin_unlock_irqrestore+0x16/0x30 [ 2.181354] ? get_page_from_freelist+0xcd6/0xdf0 [ 2.181594] ? sock_sendmsg+0x56/0x60 [ 2.181781] sock_sendmsg+0x56/0x60 [ 2.181958] __sys_sendto+0xf7/0x160 [ 2.182139] ? handle_mm_fault+0x6e/0x1d0 [ 2.182366] ? do_user_addr_fault+0x1e1/0x660 [ 2.182627] __x64_sys_sendto+0x1b/0x30 [ 2.182881] do_syscall_64+0x38/0x90 [ 2.183085] entry_SYSCALL_64_after_hwframe+0x63/0xcd ... [ 2.187402] </TASK> Previously in commit d66d6c31 ("net: sched: register noqueue qdisc"), NULL was set for the noqueue discipline on noqueue init so that __dev_queue_xmit() falls through for the noqueue case. This also sets a bypass of the enqueue NULL check in the register_qdisc() function for the struct noqueue_disc_ops. Classful queue disciplines make it past the NULL check in __dev_queue_xmit() because the discipline is set to htb (in this case), and then in the call to __dev_xmit_skb(), it calls into htb_enqueue() which grabs a leaf node for a class and then calls qdisc_enqueue() by passing in a queue discipline which assumes ->enqueue() is not set to NULL. Fix this by not allowing classes to be assigned to the noqueue discipline. Linux TC Notes states that classes cannot be set to the noqueue discipline. [1] Let's enforce that here. Links: 1. https://linux-tc-notes.sourceforge.net/tc/doc/sch_noqueue.txt Fixes: d66d6c31 ("net: sched: register noqueue qdisc") Cc: stable@vger.kernel.org Signed-off-by:
Frederick Lawler <fred@cloudflare.com> Reviewed-by:
Jakub Sitnicki <jakub@cloudflare.com> Link: https://lore.kernel.org/r/20230109163906.706000-1-fred@cloudflare.com Signed-off-by:
Jakub Kicinski <kuba@kernel.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Biju Das authored
commit c72a7e42 upstream. This patch fixes the error "ravb 11c20000.ethernet eth0: failed to switch device to config mode" during unbind. We are doing register access after pm_runtime_put_sync(). We usually do cleanup in reverse order of init. Currently in remove(), the "pm_runtime_put_sync" is not in reverse order. Probe reset_control_deassert(rstc); pm_runtime_enable(&pdev->dev); pm_runtime_get_sync(&pdev->dev); remove pm_runtime_put_sync(&pdev->dev); unregister_netdev(ndev); .. ravb_mdio_release(priv); pm_runtime_disable(&pdev->dev); Consider the call to unregister_netdev() unregister_netdev->unregister_netdevice_queue->rollback_registered_many that calls the below functions which access the registers after pm_runtime_put_sync() 1) ravb_get_stats 2) ravb_close Fixes: c156633f ("Renesas Ethernet AVB driver proper") Cc: stable@vger.kernel.org Signed-off-by:
Biju Das <biju.das.jz@bp.renesas.com> Reviewed-by:
Leon Romanovsky <leonro@nvidia.com> Link: https://lore.kernel.org/r/20221214105118.2495313-1-biju.das.jz@bp.renesas.com Signed-off-by:
Paolo Abeni <pabeni@redhat.com> Signed-off-by:
Biju Das <biju.das.jz@bp.renesas.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Isaac J. Manjarres authored
commit 27c0d217 upstream. When a driver registers with a bus, it will attempt to match with every device on the bus through the __driver_attach() function. Currently, if the bus_type.match() function encounters an error that is not -EPROBE_DEFER, __driver_attach() will return a negative error code, which causes the driver registration logic to stop trying to match with the remaining devices on the bus. This behavior is not correct; a failure while matching a driver to a device does not mean that the driver won't be able to match and bind with other devices on the bus. Update the logic in __driver_attach() to reflect this. Fixes: 656b8035 ("ARM: 8524/1: driver cohandle -EPROBE_DEFER from bus_type.match()") Cc: stable@vger.kernel.org Cc: Saravana Kannan <saravanak@google.com> Signed-off-by:
Isaac J. Manjarres <isaacmanjarres@google.com> Link: https://lore.kernel.org/r/20220921001414.4046492-1-isaacmanjarres@google.com Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Helge Deller authored
commit 71bdea6f upstream. Adjust some MADV_XXX constants to be in sync what their values are on all other platforms. There is currently no reason to have an own numbering on parisc, but it requires workarounds in many userspace sources (e.g. glibc, qemu, ...) - which are often forgotten and thus introduce bugs and different behaviour on parisc. A wrapper avoids an ABI breakage for existing userspace applications by translating any old values to the new ones, so this change allows us to move over all programs to the new ABI over time. Signed-off-by:
Helge Deller <deller@gmx.de> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Linus Torvalds authored
commit cb7a95af upstream. Commit 55d1cbbb ("hfs/hfsplus: use WARN_ON for sanity check") fixed a build warning by turning a comment into a WARN_ON(), but it turns out that syzbot then complains because it can trigger said warning with a corrupted hfs image. The warning actually does warn about a bad situation, but we are much better off just handling it as the error it is. So rather than warn about us doing bad things, stop doing the bad things and return -EIO. While at it, also fix a memory leak that was introduced by an earlier fix for a similar syzbot warning situation, and add a check for one case that historically wasn't handled at all (ie neither comment nor subsequent WARN_ON). Reported-by:
<syzbot+7bb7cd3595533513a9e7@syzkaller.appspotmail.com> Fixes: 55d1cbbb ("hfs/hfsplus: use WARN_ON for sanity check") Fixes: 8d824e69 ("hfs: fix OOB Read in __hfs_brec_find") Link: https://lore.kernel.org/lkml/000000000000dbce4e05f170f289@google.com/ Tested-by:
Michael Schmitz <schmitzmic@gmail.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Matthew Wilcox <willy@infradead.org> Cc: Viacheslav Dubeyko <slava@dubeyko.com> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-