- Jun 15, 2021
-
-
Daniel Borkmann authored
... in such circumstances, we do not want to mark the instruction as seen given the goal is still to jmp-1 rewrite/sanitize dead code, if it is not reachable from the non-speculative path verification. We do however want to verify it for safety regardless. With the patch as-is all the insns that have been marked as seen before the patch will also be marked as seen after the patch (just with a potentially different non-zero count). An upcoming patch will also verify paths that are unreachable in the non-speculative domain, hence this extension is needed. Signed-off-by:
Daniel Borkmann <daniel@iogearbox.net> Reviewed-by:
John Fastabend <john.fastabend@gmail.com> Reviewed-by:
Benedict Schlueter <benedict.schlueter@rub.de> Reviewed-by:
Piotr Krysiuk <piotras@gmail.com> Acked-by:
Alexei Starovoitov <ast@kernel.org>
-
Daniel Borkmann authored
Instead of relying on current env->pass_cnt, use the seen count from the old aux data in adjust_insn_aux_data(), and expand it to the new range of patched instructions. This change is valid given we always expand 1:n with n>=1, so what applies to the old/original instruction needs to apply for the replacement as well. Not relying on env->pass_cnt is a prerequisite for a later change where we want to avoid marking an instruction seen when verified under speculative execution path. Signed-off-by:
Daniel Borkmann <daniel@iogearbox.net> Reviewed-by:
John Fastabend <john.fastabend@gmail.com> Reviewed-by:
Benedict Schlueter <benedict.schlueter@rub.de> Reviewed-by:
Piotr Krysiuk <piotras@gmail.com> Acked-by:
Alexei Starovoitov <ast@kernel.org>
-
- Jun 08, 2021
-
-
Kev Jackson authored
When calling xsk_socket__create_shared(), the logic at line 1097 marks a boolean flag true within the xsk_umem structure to track setup progress in order to support multiple calls to the function. However, instead of marking umem->tx_ring_setup_done, the code incorrectly sets umem->rx_ring_setup_done. This leads to improper behaviour when creating and destroying xsk and umem structures. Multiple calls to this function is documented as supported. Fixes: ca7a83e2 ("libbpf: Only create rx and tx XDP rings when necessary") Signed-off-by:
Kev Jackson <foamdino@gmail.com> Signed-off-by:
Andrii Nakryiko <andrii@kernel.org> Acked-by:
Yonghong Song <yhs@fb.com> Link: https://lore.kernel.org/bpf/YL4aU4f3Aaik7CN0@linux-dev
-
- Jun 04, 2021
-
-
Xuan Zhuo authored
In virtio-net's large packet mode, there is a hole in the space behind buf. hdr_padded_len - hdr_len We must take this into account when calculating tailroom. [ 44.544385] skb_put.cold (net/core/skbuff.c:5254 (discriminator 1) net/core/skbuff.c:5252 (discriminator 1)) [ 44.544864] page_to_skb (drivers/net/virtio_net.c:485) [ 44.545361] receive_buf (drivers/net/virtio_net.c:849 drivers/net/virtio_net.c:1131) [ 44.545870] ? netif_receive_skb_list_internal (net/core/dev.c:5714) [ 44.546628] ? dev_gro_receive (net/core/dev.c:6103) [ 44.547135] ? napi_complete_done (./include/linux/list.h:35 net/core/dev.c:5867 net/core/dev.c:5862 net/core/dev.c:6565) [ 44.547672] virtnet_poll (drivers/net/virtio_net.c:1427 drivers/net/virtio_net.c:1525) [ 44.548251] __napi_poll (net/core/dev.c:6985) [ 44.548744] net_rx_action (net/core/dev.c:7054 net/core/dev.c:7139) [ 44.549264] __do_softirq (./arch/x86/include/asm/jump_label.h:19 ./include/linux/jump_label.h:200 ./include/trace/events/irq.h:142 kernel/softirq.c:560) [ 44.549762] irq_exit_rcu (kernel/softirq.c:433 kernel/softirq.c:637 kernel/softirq.c:649) [ 44.551384] common_interrupt (arch/x86/kernel/irq.c:240 (discriminator 13)) [ 44.551991] ? asm_common_interrupt (./arch/x86/include/asm/idtentry.h:638) [ 44.552654] asm_common_interrupt (./arch/x86/include/asm/idtentry.h:638) Fixes: fb32856b ("virtio-net: page_to_skb() use build_skb when there's sufficient tailroom") Signed-off-by:
Xuan Zhuo <xuanzhuo@linux.alibaba.com> Reported-by:
Corentin Noël <corentin.noel@collabora.com> Tested-by:
Corentin Noël <corentin.noel@collabora.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Merge tag 'ieee802154-for-davem-2021-06-03' of git://git.kernel.org/pub/scm/linux/kernel/git/sschmidt/wpan Stefan Schmidt says: ==================== An update from ieee802154 for your *net* tree. This time we have fixes for the ieee802154 netlink code, as well as a driver fix. Zhen Lei, Wei Yongjun and Yang Li each had a patch to cleanup some return code handling ensuring we actually get a real error code when things fails. Dan Robertson fixed a potential null dereference in our netlink handling. Andy Shevchenko removed of_match_ptr()usage in the mrf24j40 driver. ==================== Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Coco Li authored
Reported by syzbot: HEAD commit: 90c911ad Merge tag 'fixes' of git://git.kernel.org/pub/scm.. git tree: git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git master dashboard link: https://syzkaller.appspot.com/bug?extid=123aa35098fd3c000eb7 compiler: Debian clang version 11.0.1-2 ================================================================== BUG: KASAN: slab-out-of-bounds in fib6_nh_get_excptn_bucket net/ipv6/route.c:1604 [inline] BUG: KASAN: slab-out-of-bounds in fib6_nh_flush_exceptions+0xbd/0x360 net/ipv6/route.c:1732 Read of size 8 at addr ffff8880145c78f8 by task syz-executor.4/17760 CPU: 0 PID: 17760 Comm: syz-executor.4 Not tainted 5.12.0-rc8-syzkaller #0 Call Trace: <IRQ> __dump_stack lib/dump_stack.c:79 [inline] dump_stack+0x202/0x31e lib/dump_stack.c:120 print_address_description+0x5f/0x3b0 mm/kasan/report.c:232 __kasan_report mm/kasan/report.c:399 [inline] kasan_report+0x15c/0x200 mm/kasan/report.c:416 fib6_nh_get_excptn_bucket net/ipv6/route.c:1604 [inline] fib6_nh_flush_exceptions+0xbd/0x360 net/ipv6/route.c:1732 fib6_nh_release+0x9a/0x430 net/ipv6/route.c:3536 fib6_info_destroy_rcu+0xcb/0x1c0 net/ipv6/ip6_fib.c:174 rcu_do_batch kernel/rcu/tree.c:2559 [inline] rcu_core+0x8f6/0x1450 kernel/rcu/tree.c:2794 __do_softirq+0x372/0x7a6 kernel/softirq.c:345 invoke_softirq kernel/softirq.c:221 [inline] __irq_exit_rcu+0x22c/0x260 kernel/softirq.c:422 irq_exit_rcu+0x5/0x20 kernel/softirq.c:434 sysvec_apic_timer_interrupt+0x91/0xb0 arch/x86/kernel/apic/apic.c:1100 </IRQ> asm_sysvec_apic_timer_interrupt+0x12/0x20 arch/x86/include/asm/idtentry.h:632 RIP: 0010:lock_acquire+0x1f6/0x720 kernel/locking/lockdep.c:5515 Code: f6 84 24 a1 00 00 00 02 0f 85 8d 02 00 00 f7 c3 00 02 00 00 49 bd 00 00 00 00 00 fc ff df 74 01 fb 48 c7 44 24 40 0e 36 e0 45 <4b> c7 44 3d 00 00 00 00 00 4b c7 44 3d 09 00 00 00 00 43 c7 44 3d RSP: 0018:ffffc90009e06560 EFLAGS: 00000206 RAX: 1ffff920013c0cc0 RBX: 0000000000000246 RCX: dffffc0000000000 RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000 RBP: ffffc90009e066e0 R08: dffffc0000000000 R09: fffffbfff1f992b1 R10: fffffbfff1f992b1 R11: 0000000000000000 R12: 0000000000000000 R13: dffffc0000000000 R14: 0000000000000000 R15: 1ffff920013c0cb4 rcu_lock_acquire+0x2a/0x30 include/linux/rcupdate.h:267 rcu_read_lock include/linux/rcupdate.h:656 [inline] ext4_get_group_info+0xea/0x340 fs/ext4/ext4.h:3231 ext4_mb_prefetch+0x123/0x5d0 fs/ext4/mballoc.c:2212 ext4_mb_regular_allocator+0x8a5/0x28f0 fs/ext4/mballoc.c:2379 ext4_mb_new_blocks+0xc6e/0x24f0 fs/ext4/mballoc.c:4982 ext4_ext_map_blocks+0x2be3/0x7210 fs/ext4/extents.c:4238 ext4_map_blocks+0xab3/0x1cb0 fs/ext4/inode.c:638 ext4_getblk+0x187/0x6c0 fs/ext4/inode.c:848 ext4_bread+0x2a/0x1c0 fs/ext4/inode.c:900 ext4_append+0x1a4/0x360 fs/ext4/namei.c:67 ext4_init_new_dir+0x337/0xa10 fs/ext4/namei.c:2768 ext4_mkdir+0x4b8/0xc00 fs/ext4/namei.c:2814 vfs_mkdir+0x45b/0x640 fs/namei.c:3819 ovl_do_mkdir fs/overlayfs/overlayfs.h:161 [inline] ovl_mkdir_real+0x53/0x1a0 fs/overlayfs/dir.c:146 ovl_create_real+0x280/0x490 fs/overlayfs/dir.c:193 ovl_workdir_create+0x425/0x600 fs/overlayfs/super.c:788 ovl_make_workdir+0xed/0x1140 fs/overlayfs/super.c:1355 ovl_get_workdir fs/overlayfs/super.c:1492 [inline] ovl_fill_super+0x39ee/0x5370 fs/overlayfs/super.c:2035 mount_nodev+0x52/0xe0 fs/super.c:1413 legacy_get_tree+0xea/0x180 fs/fs_context.c:592 vfs_get_tree+0x86/0x270 fs/super.c:1497 do_new_mount fs/namespace.c:2903 [inline] path_mount+0x196f/0x2be0 fs/namespace.c:3233 do_mount fs/namespace.c:3246 [inline] __do_sys_mount fs/namespace.c:3454 [inline] __se_sys_mount+0x2f9/0x3b0 fs/namespace.c:3431 do_syscall_64+0x2d/0x70 arch/x86/entry/common.c:46 entry_SYSCALL_64_after_hwframe+0x44/0xae RIP: 0033:0x4665f9 Code: ff ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 40 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 bc ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007f68f2b87188 EFLAGS: 00000246 ORIG_RAX: 00000000000000a5 RAX: ffffffffffffffda RBX: 000000000056bf60 RCX: 00000000004665f9 RDX: 00000000200000c0 RSI: 0000000020000000 RDI: 000000000040000a RBP: 00000000004bfbb9 R08: 0000000020000100 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 000000000056bf60 R13: 00007ffe19002dff R14: 00007f68f2b87300 R15: 0000000000022000 Allocated by task 17768: kasan_save_stack mm/kasan/common.c:38 [inline] kasan_set_track mm/kasan/common.c:46 [inline] set_alloc_info mm/kasan/common.c:427 [inline] ____kasan_kmalloc+0xc2/0xf0 mm/kasan/common.c:506 kasan_kmalloc include/linux/kasan.h:233 [inline] __kmalloc+0xb4/0x380 mm/slub.c:4055 kmalloc include/linux/slab.h:559 [inline] kzalloc include/linux/slab.h:684 [inline] fib6_info_alloc+0x2c/0xd0 net/ipv6/ip6_fib.c:154 ip6_route_info_create+0x55d/0x1a10 net/ipv6/route.c:3638 ip6_route_add+0x22/0x120 net/ipv6/route.c:3728 inet6_rtm_newroute+0x2cd/0x2260 net/ipv6/route.c:5352 rtnetlink_rcv_msg+0xb34/0xe70 net/core/rtnetlink.c:5553 netlink_rcv_skb+0x1f0/0x460 net/netlink/af_netlink.c:2502 netlink_unicast_kernel net/netlink/af_netlink.c:1312 [inline] netlink_unicast+0x7de/0x9b0 net/netlink/af_netlink.c:1338 netlink_sendmsg+0xaa6/0xe90 net/netlink/af_netlink.c:1927 sock_sendmsg_nosec net/socket.c:654 [inline] sock_sendmsg net/socket.c:674 [inline] ____sys_sendmsg+0x5a2/0x900 net/socket.c:2350 ___sys_sendmsg net/socket.c:2404 [inline] __sys_sendmsg+0x319/0x400 net/socket.c:2433 do_syscall_64+0x2d/0x70 arch/x86/entry/common.c:46 entry_SYSCALL_64_after_hwframe+0x44/0xae Last potentially related work creation: kasan_save_stack+0x27/0x50 mm/kasan/common.c:38 kasan_record_aux_stack+0xee/0x120 mm/kasan/generic.c:345 __call_rcu kernel/rcu/tree.c:3039 [inline] call_rcu+0x1b1/0xa30 kernel/rcu/tree.c:3114 fib6_info_release include/net/ip6_fib.h:337 [inline] ip6_route_info_create+0x10c4/0x1a10 net/ipv6/route.c:3718 ip6_route_add+0x22/0x120 net/ipv6/route.c:3728 inet6_rtm_newroute+0x2cd/0x2260 net/ipv6/route.c:5352 rtnetlink_rcv_msg+0xb34/0xe70 net/core/rtnetlink.c:5553 netlink_rcv_skb+0x1f0/0x460 net/netlink/af_netlink.c:2502 netlink_unicast_kernel net/netlink/af_netlink.c:1312 [inline] netlink_unicast+0x7de/0x9b0 net/netlink/af_netlink.c:1338 netlink_sendmsg+0xaa6/0xe90 net/netlink/af_netlink.c:1927 sock_sendmsg_nosec net/socket.c:654 [inline] sock_sendmsg net/socket.c:674 [inline] ____sys_sendmsg+0x5a2/0x900 net/socket.c:2350 ___sys_sendmsg net/socket.c:2404 [inline] __sys_sendmsg+0x319/0x400 net/socket.c:2433 do_syscall_64+0x2d/0x70 arch/x86/entry/common.c:46 entry_SYSCALL_64_after_hwframe+0x44/0xae Second to last potentially related work creation: kasan_save_stack+0x27/0x50 mm/kasan/common.c:38 kasan_record_aux_stack+0xee/0x120 mm/kasan/generic.c:345 insert_work+0x54/0x400 kernel/workqueue.c:1331 __queue_work+0x981/0xcc0 kernel/workqueue.c:1497 queue_work_on+0x111/0x200 kernel/workqueue.c:1524 queue_work include/linux/workqueue.h:507 [inline] call_usermodehelper_exec+0x283/0x470 kernel/umh.c:433 kobject_uevent_env+0x1349/0x1730 lib/kobject_uevent.c:617 kvm_uevent_notify_change+0x309/0x3b0 arch/x86/kvm/../../../virt/kvm/kvm_main.c:4809 kvm_destroy_vm arch/x86/kvm/../../../virt/kvm/kvm_main.c:877 [inline] kvm_put_kvm+0x9c/0xd10 arch/x86/kvm/../../../virt/kvm/kvm_main.c:920 kvm_vcpu_release+0x53/0x60 arch/x86/kvm/../../../virt/kvm/kvm_main.c:3120 __fput+0x352/0x7b0 fs/file_table.c:280 task_work_run+0x146/0x1c0 kernel/task_work.c:140 tracehook_notify_resume include/linux/tracehook.h:189 [inline] exit_to_user_mode_loop kernel/entry/common.c:174 [inline] exit_to_user_mode_prepare+0x10b/0x1e0 kernel/entry/common.c:208 __syscall_exit_to_user_mode_work kernel/entry/common.c:290 [inline] syscall_exit_to_user_mode+0x26/0x70 kernel/entry/common.c:301 entry_SYSCALL_64_after_hwframe+0x44/0xae The buggy address belongs to the object at ffff8880145c7800 which belongs to the cache kmalloc-192 of size 192 The buggy address is located 56 bytes to the right of 192-byte region [ffff8880145c7800, ffff8880145c78c0) The buggy address belongs to the page: page:ffffea00005171c0 refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x145c7 flags: 0xfff00000000200(slab) raw: 00fff00000000200 ffffea00006474c0 0000000200000002 ffff888010c41a00 raw: 0000000000000000 0000000080100010 00000001ffffffff 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff8880145c7780: fb fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc ffff8880145c7800: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 >ffff8880145c7880: 00 00 00 00 fc fc fc fc fc fc fc fc fc fc fc fc ^ ffff8880145c7900: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ffff8880145c7980: fb fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc ================================================================== In the ip6_route_info_create function, in the case that the nh pointer is not NULL, the fib6_nh in fib6_info has not been allocated. Therefore, when trying to free fib6_info in this error case using fib6_info_release, the function will call fib6_info_destroy_rcu, which it will access fib6_nh_release(f6i->fib6_nh); However, f6i->fib6_nh doesn't have any refcount yet given the lack of allocation causing the reported memory issue above. Therefore, releasing the empty pointer directly instead would be the solution. Fixes: f88d8ea6 ("ipv6: Plumb support for nexthop object in a fib6_info") Fixes: 706ec919 ("ipv6: Fix nexthop refcnt leak when creating ipv6 route info") Signed-off-by:
Coco Li <lixiaoyan@google.com> Cc: David Ahern <dsahern@kernel.org> Reviewed-by:
Eric Dumazet <edumazet@google.com> Reviewed-by:
David Ahern <dsahern@kernel.org> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Merge tag 'wireless-drivers-2021-06-03' of git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers Kalle Valo says: ==================== wireless-drivers fixes for v5.13 We have only mt76 fixes this time, most important being the fix for A-MSDU injection attacks. mt76 * mitigate A-MSDU injection attacks (CVE-2020-24588) * fix possible array out of bound access in mt7921_mcu_tx_rate_report * various aggregation and HE setting fixes * suspend/resume fix for pci devices * mt7615: fix crash when runtime-pm is not supported ==================== Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Zheng Yongjun authored
When kalloc or kmemdup failed, should return ENOMEM rather than ENOBUF. Signed-off-by:
Zheng Yongjun <zhengyongjun3@huawei.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Zheng Yongjun authored
When kalloc or kmemdup failed, should return ENOMEM rather than ENOBUF. Signed-off-by:
Zheng Yongjun <zhengyongjun3@huawei.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Zheng Yongjun authored
When kalloc or kmemdup failed, should return ENOMEM rather than ENOBUF. Signed-off-by:
Zheng Yongjun <zhengyongjun3@huawei.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Rahul Lakkireddy authored
commit db43b30c ("cxgb4: add ethtool n-tuple filter deletion") has moved searching for next highest priority HASH filter rule to cxgb4_flow_rule_destroy(), which searches the rhashtable before the the rule is removed from it and hence always finds at least 1 entry. Fix by removing the rule from rhashtable first before calling cxgb4_flow_rule_destroy() and hence avoid fetching stale info. Fixes: db43b30c ("cxgb4: add ethtool n-tuple filter deletion") Signed-off-by:
Rahul Lakkireddy <rahul.lakkireddy@chelsio.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Pavel Skripkin says: ==================== This patch series fix 2 memory leaks in caif interface. Syzbot reported memory leak in cfserl_create(). The problem was in cfcnfg_add_phy_layer() function. This function accepts struct cflayer *link_support and assign it to corresponting structures, but it can fail in some cases. These cases must be handled to prevent leaking allocated struct cflayer *link_support pointer, because if error accured before assigning link_support pointer to somewhere, this pointer must be freed. Fail log: [ 49.051872][ T7010] caif:cfcnfg_add_phy_layer(): Too many CAIF Link Layers (max 6) [ 49.110236][ T7042] caif:cfcnfg_add_phy_layer(): Too many CAIF Link Layers (max 6) [ 49.134936][ T7045] caif:cfcnfg_add_phy_layer(): Too many CAIF Link Layers (max 6) [ 49.163083][ T7043] caif:cfcnfg_add_phy_layer(): Too many CAIF Link Layers (max 6) [ 55.248950][ T6994] kmemleak: 4 new suspected memory leaks (see /sys/kernel/debug/kmemleak) int cfcnfg_add_phy_layer(..., struct cflayer *link_support, ...) { ... /* CAIF protocol allow maximum 6 link-layers */ for (i = 0; i < 7; i++) { phyid = (dev->ifindex + i) & 0x7; if (phyid == 0) continue; if (cfcnfg_get_phyinfo_rcu(cnfg, phyid) == NULL) goto got_phyid; } pr_warn("Too many CAIF Link Layers (max 6)\n"); goto out; ... if (link_support != NULL) { link_support->id = phyid; layer_set_dn(frml, link_support); layer_set_up(link_support, frml); layer_set_dn(link_support, phy_layer); layer_set_up(phy_layer, link_support); } ... } As you can see, if cfcnfg_add_phy_layer fails before layer_set_*, link_support becomes leaked. So, in this series, I made cfcnfg_add_phy_layer() return an int and added error handling code to prevent leaking link_support pointer in caif_device_notify() and cfusbl_device_notify() functions. ==================== Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Pavel Skripkin authored
In case of caif_enroll_dev() fail, allocated link_support won't be assigned to the corresponding structure. So simply free allocated pointer in case of error. Fixes: 7ad65bf6 ("caif: Add support for CAIF over CDC NCM USB interface") Cc: stable@vger.kernel.org Signed-off-by:
Pavel Skripkin <paskripkin@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Pavel Skripkin authored
In case of caif_enroll_dev() fail, allocated link_support won't be assigned to the corresponding structure. So simply free allocated pointer in case of error Fixes: 7c18d220 ("caif: Restructure how link caif link layer enroll") Cc: stable@vger.kernel.org Reported-and-tested-by:
<syzbot+7ec324747ce876a29db6@syzkaller.appspotmail.com> Signed-off-by:
Pavel Skripkin <paskripkin@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Pavel Skripkin authored
caif_enroll_dev() can fail in some cases. Ingnoring these cases can lead to memory leak due to not assigning link_support pointer to anywhere. Fixes: 7c18d220 ("caif: Restructure how link caif link layer enroll") Cc: stable@vger.kernel.org Signed-off-by:
Pavel Skripkin <paskripkin@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Pavel Skripkin authored
Added cfserl_release() function. Cc: stable@vger.kernel.org Signed-off-by:
Pavel Skripkin <paskripkin@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queueDavid S. Miller authored
Tony Nguyen says: ==================== This series contains updates to igb, igc, ixgbe, ixgbevf, i40e and ice drivers. Kurt Kanzenbach fixes XDP for igb when PTP is enabled by pulling the timestamp and adjusting appropriate values prior to XDP operations. Magnus adds missing exception tracing for XDP on igb, igc, ixgbe, ixgbevf, i40e and ice drivers. Maciej adds tracking of AF_XDP zero copy enabled queues to resolve an issue with copy mode Tx for the ice driver. Note: Patch 7 will conflict when merged with net-next. Please carry these changes forward. IGC_XDP_TX and IGC_XDP_REDIRECT will need to be changed to return to conform with the net-next changes. Let me know if you have issues. ==================== Signed-off-by:
David S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpfDavid S. Miller authored
Daniel Borkmann says: ==================== pull-request: bpf 2021-06-02 The following pull-request contains BPF updates for your *net* tree. We've added 2 non-merge commits during the last 7 day(s) which contain a total of 4 files changed, 19 insertions(+), 24 deletions(-). The main changes are: 1) Fix pahole BTF generation when ccache is used, from Javier Martinez Canillas. 2) Fix BPF lockdown hooks in bpf_probe_read_kernel{,_str}() helpers which caused a deadlock from bcc programs, triggered OOM killer from audit side and didn't work generally with SELinux policy rules due to pointing to wrong task struct, from Daniel Borkmann. ==================== Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Pavel Skripkin authored
Syzbot reported memory leak in kcm_sendmsg()[1]. The problem was in non-freed frag_list in case of error. In the while loop: if (head == skb) skb_shinfo(head)->frag_list = tskb; else skb->next = tskb; frag_list filled with skbs, but nothing was freeing them. backtrace: [<0000000094c02615>] __alloc_skb+0x5e/0x250 net/core/skbuff.c:198 [<00000000e5386cbd>] alloc_skb include/linux/skbuff.h:1083 [inline] [<00000000e5386cbd>] kcm_sendmsg+0x3b6/0xa50 net/kcm/kcmsock.c:967 [1] [<00000000f1613a8a>] sock_sendmsg_nosec net/socket.c:652 [inline] [<00000000f1613a8a>] sock_sendmsg+0x4c/0x60 net/socket.c:672 Reported-and-tested-by:
<syzbot+b039f5699bd82e1fb011@syzkaller.appspotmail.com> Fixes: ab7ac4eb ("kcm: Kernel Connection Multiplexor module") Cc: stable@vger.kernel.org Signed-off-by:
Pavel Skripkin <paskripkin@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
zhang kai authored
addrconf_set_sit_dstaddr will use parms->name. Signed-off-by:
zhang kai <zhangkaiheb@126.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Jiapeng Chong authored
The error code is missing in this code scenario, add the error code '-EINVAL' to the return value 'err'. Eliminate the follow smatch warning: net/core/rtnetlink.c:4834 rtnl_bridge_notify() warn: missing error code 'err'. Reported-by:
Abaci Robot <abaci@linux.alibaba.com> Signed-off-by:
Jiapeng Chong <jiapeng.chong@linux.alibaba.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nfDavid S. Miller authored
Pablo Neira Ayuso says: ==================== Netfilter fixes for net The following patchset contains Netfilter fixes for net: 1) Do not allow to add conntrack helper extension for confirmed conntracks in the nf_tables ct expectation support. 2) Fix bogus EBUSY in nfnetlink_cthelper when NFCTH_PRIV_DATA_LEN is passed on userspace helper updates. ==================== Signed-off-by:
David S. Miller <davem@davemloft.net>
-
- Jun 03, 2021
-
-
Maciej Fijalkowski authored
Commit c7a21904 ("ice: Remove xsk_buff_pool from VSI structure") silently introduced a regression and broke the Tx side of AF_XDP in copy mode. xsk_pool on ice_ring is set only based on the existence of the XDP prog on the VSI which in turn picks ice_clean_tx_irq_zc to be executed. That is not something that should happen for copy mode as it should use the regular data path ice_clean_tx_irq. This results in a following splat when xdpsock is run in txonly or l2fwd scenarios in copy mode: <snip> [ 106.050195] BUG: kernel NULL pointer dereference, address: 0000000000000030 [ 106.057269] #PF: supervisor read access in kernel mode [ 106.062493] #PF: error_code(0x0000) - not-present page [ 106.067709] PGD 0 P4D 0 [ 106.070293] Oops: 0000 [#1] PREEMPT SMP NOPTI [ 106.074721] CPU: 61 PID: 0 Comm: swapper/61 Not tainted 5.12.0-rc2+ #45 [ 106.081436] Hardware name: Intel Corporation S2600WFT/S2600WFT, BIOS SE5C620.86B.02.01.0008.031920191559 03/19/2019 [ 106.092027] RIP: 0010:xp_raw_get_dma+0x36/0x50 [ 106.096551] Code: 74 14 48 b8 ff ff ff ff ff ff 00 00 48 21 f0 48 c1 ee 30 48 01 c6 48 8b 87 90 00 00 00 48 89 f2 81 e6 ff 0f 00 00 48 c1 ea 0c <48> 8b 04 d0 48 83 e0 fe 48 01 f0 c3 66 66 2e 0f 1f 84 00 00 00 00 [ 106.115588] RSP: 0018:ffffc9000d694e50 EFLAGS: 00010206 [ 106.120893] RAX: 0000000000000000 RBX: ffff88984b8c8a00 RCX: ffff889852581800 [ 106.128137] RDX: 0000000000000006 RSI: 0000000000000000 RDI: ffff88984cd8b800 [ 106.135383] RBP: ffff888123b50001 R08: ffff889896800000 R09: 0000000000000800 [ 106.142628] R10: 0000000000000000 R11: ffffffff826060c0 R12: 00000000000000ff [ 106.149872] R13: 0000000000000000 R14: 0000000000000040 R15: ffff888123b50018 [ 106.157117] FS: 0000000000000000(0000) GS:ffff8897e0f40000(0000) knlGS:0000000000000000 [ 106.165332] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 106.171163] CR2: 0000000000000030 CR3: 000000000560a004 CR4: 00000000007706e0 [ 106.178408] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 106.185653] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 106.192898] PKRU: 55555554 [ 106.195653] Call Trace: [ 106.198143] <IRQ> [ 106.200196] ice_clean_tx_irq_zc+0x183/0x2a0 [ice] [ 106.205087] ice_napi_poll+0x3e/0x590 [ice] [ 106.209356] __napi_poll+0x2a/0x160 [ 106.212911] net_rx_action+0xd6/0x200 [ 106.216634] __do_softirq+0xbf/0x29b [ 106.220274] irq_exit_rcu+0x88/0xc0 [ 106.223819] common_interrupt+0x7b/0xa0 [ 106.227719] </IRQ> [ 106.229857] asm_common_interrupt+0x1e/0x40 </snip> Fix this by introducing the bitmap of queues that are zero-copy enabled, where each bit, corresponding to a queue id that xsk pool is being configured on, will be set/cleared within ice_xsk_pool_{en,dis}able and checked within ice_xsk_pool(). The latter is a function used for deciding which napi poll routine is executed. Idea is being taken from our other drivers such as i40e and ixgbe. Fixes: c7a21904 ("ice: Remove xsk_buff_pool from VSI structure") Signed-off-by:
Maciej Fijalkowski <maciej.fijalkowski@intel.com> Tested-by:
Kiran Bhandare <kiranx.bhandare@intel.com> Signed-off-by:
Tony Nguyen <anthony.l.nguyen@intel.com>
-
Magnus Karlsson authored
Add missing exception tracing to XDP when a number of different errors can occur. The support was only partial. Several errors where not logged which would confuse the user quite a lot not knowing where and why the packets disappeared. Fixes: 73f1071c ("igc: Add support for XDP_TX action") Fixes: 4ff32036 ("igc: Add support for XDP_REDIRECT action") Reported-by:
Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by:
Magnus Karlsson <magnus.karlsson@intel.com> Tested-by:
Dvora Fuxbrumer <dvorax.fuxbrumer@linux.intel.com> Signed-off-by:
Tony Nguyen <anthony.l.nguyen@intel.com>
-
Magnus Karlsson authored
Add missing exception tracing to XDP when a number of different errors can occur. The support was only partial. Several errors where not logged which would confuse the user quite a lot not knowing where and why the packets disappeared. Fixes: 21092e9c ("ixgbevf: Add support for XDP_TX action") Reported-by:
Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by:
Magnus Karlsson <magnus.karlsson@intel.com> Tested-by:
Vishakha Jambekar <vishakha.jambekar@intel.com> Signed-off-by:
Tony Nguyen <anthony.l.nguyen@intel.com>
-
Magnus Karlsson authored
Add missing exception tracing to XDP when a number of different errors can occur. The support was only partial. Several errors where not logged which would confuse the user quite a lot not knowing where and why the packets disappeared. Fixes: 9cbc948b ("igb: add XDP support") Reported-by:
Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by:
Magnus Karlsson <magnus.karlsson@intel.com> Tested-by:
Vishakha Jambekar <vishakha.jambekar@intel.com> Signed-off-by:
Tony Nguyen <anthony.l.nguyen@intel.com>
-
Magnus Karlsson authored
Add missing exception tracing to XDP when a number of different errors can occur. The support was only partial. Several errors where not logged which would confuse the user quite a lot not knowing where and why the packets disappeared. Fixes: 33fdc82f ("ixgbe: add support for XDP_TX action") Fixes: d0bcacd0 ("ixgbe: add AF_XDP zero-copy Rx support") Reported-by:
Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by:
Magnus Karlsson <magnus.karlsson@intel.com> Tested-by:
Vishakha Jambekar <vishakha.jambekar@intel.com> Signed-off-by:
Tony Nguyen <anthony.l.nguyen@intel.com>
-
Magnus Karlsson authored
Add missing exception tracing to XDP when a number of different errors can occur. The support was only partial. Several errors where not logged which would confuse the user quite a lot not knowing where and why the packets disappeared. Fixes: efc2214b ("ice: Add support for XDP") Fixes: 2d4238f5 ("ice: Add support for AF_XDP") Reported-by:
Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by:
Magnus Karlsson <magnus.karlsson@intel.com> Tested-by:
Kiran Bhandare <kiranx.bhandare@intel.com> Signed-off-by:
Tony Nguyen <anthony.l.nguyen@intel.com>
-
Magnus Karlsson authored
Add missing exception tracing to XDP when a number of different errors can occur. The support was only partial. Several errors where not logged which would confuse the user quite a lot not knowing where and why the packets disappeared. Fixes: 74608d17 ("i40e: add support for XDP_TX action") Fixes: 0a714186 ("i40e: add AF_XDP zero-copy Rx support") Reported-by:
Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by:
Magnus Karlsson <magnus.karlsson@intel.com> Tested-by:
Kiran Bhandare <kiranx.bhandare@intel.com> Signed-off-by:
Tony Nguyen <anthony.l.nguyen@intel.com>
-
Kurt Kanzenbach authored
When using native XDP with the igb driver, the XDP frame data doesn't point to the beginning of the packet. It's off by 16 bytes. Everything works as expected with XDP skb mode. Actually these 16 bytes are used to store the packet timestamps. Therefore, pull the timestamp before executing any XDP operations and adjust all other code accordingly. The igc driver does it like that as well. Tested with Intel i210 card and AF_XDP sockets. Fixes: 9cbc948b ("igb: add XDP support") Signed-off-by:
Kurt Kanzenbach <kurt@linutronix.de> Acked-by:
Jesper Dangaard Brouer <brouer@redhat.com> Tested-by:
Sandeep Penigalapati <sandeep.penigalapati@intel.com> Signed-off-by:
Tony Nguyen <anthony.l.nguyen@intel.com>
-
Wei Yongjun authored
Fix to return negative error code -ENOBUFS from the error handling case instead of 0, as done elsewhere in this function. Fixes: 3e9c156e ("ieee802154: add netlink interfaces for llsec") Reported-by:
Hulk Robot <hulkci@huawei.com> Signed-off-by:
Wei Yongjun <weiyongjun1@huawei.com> Link: https://lore.kernel.org/r/20210519141614.3040055-1-weiyongjun1@huawei.com Signed-off-by:
Stefan Schmidt <stefan@datenfreihafen.org>
-
Zhen Lei authored
Fix to return a negative error code from the error handling case instead of 0, as done elsewhere in this function. Fixes: be51da0f ("ieee802154: Stop using NLA_PUT*().") Reported-by:
Hulk Robot <hulkci@huawei.com> Signed-off-by:
Zhen Lei <thunder.leizhen@huawei.com> Link: https://lore.kernel.org/r/20210508062517.2574-1-thunder.leizhen@huawei.com Signed-off-by:
Stefan Schmidt <stefan@datenfreihafen.org>
-
Andy Shevchenko authored
Driver can be used in different environments and moreover, when compiled with !OF, the compiler may issue a warning due to unused mrf24j40_of_match variable. Hence drop unneeded of_match_ptr() call. While at it, update headers block to reflect above changes. Signed-off-by:
Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20210531132226.47081-1-andriy.shevchenko@linux.intel.com Signed-off-by:
Stefan Schmidt <stefan@datenfreihafen.org>
-
Yang Li authored
In order to keep the code style consistency of the whole file, redundant return value ‘rc’ and its assignments should be deleted The clang_analyzer complains as follows: net/ieee802154/nl-mac.c:1203:12: warning: Although the value stored to 'rc' is used in the enclosing expression, the value is never actually read from 'rc' No functional change, only more efficient. Reported-by:
Abaci Robot <abaci@linux.alibaba.com> Signed-off-by:
Yang Li <yang.lee@linux.alibaba.com> Link: https://lore.kernel.org/r/1619346299-40237-1-git-send-email-yang.lee@linux.alibaba.com Signed-off-by:
Stefan Schmidt <stefan@datenfreihafen.org>
-
Wong Vee Khee authored
In the case of MDIO bus registration failure due to no external PHY devices is connected to the MAC, clk_disable_unprepare() is called in stmmac_bus_clk_config() and intel_eth_pci_probe() respectively. The second call in intel_eth_pci_probe() will caused the following:- [ 16.578605] intel-eth-pci 0000:00:1e.5: No PHY found [ 16.583778] intel-eth-pci 0000:00:1e.5: stmmac_dvr_probe: MDIO bus (id: 2) registration failed [ 16.680181] ------------[ cut here ]------------ [ 16.684861] stmmac-0000:00:1e.5 already disabled [ 16.689547] WARNING: CPU: 13 PID: 2053 at drivers/clk/clk.c:952 clk_core_disable+0x96/0x1b0 [ 16.697963] Modules linked in: dwc3 iTCO_wdt mei_hdcp iTCO_vendor_support udc_core x86_pkg_temp_thermal kvm_intel marvell10g kvm sch_fq_codel nfsd irqbypass dwmac_intel(+) stmmac uio ax88179_178a pcs_xpcs phylink uhid spi_pxa2xx_platform usbnet mei_me pcspkr tpm_crb mii i2c_i801 dw_dmac dwc3_pci thermal dw_dmac_core intel_rapl_msr libphy i2c_smbus mei tpm_tis intel_th_gth tpm_tis_core tpm intel_th_acpi intel_pmc_core intel_th i915 fuse configfs snd_hda_intel snd_intel_dspcfg snd_intel_sdw_acpi snd_hda_codec snd_hda_core snd_pcm snd_timer snd soundcore [ 16.746785] CPU: 13 PID: 2053 Comm: systemd-udevd Tainted: G U 5.13.0-rc3-intel-lts #76 [ 16.756134] Hardware name: Intel Corporation Alder Lake Client Platform/AlderLake-S ADP-S DRR4 CRB, BIOS ADLIFSI1.R00.1494.B00.2012031421 12/03/2020 [ 16.769465] RIP: 0010:clk_core_disable+0x96/0x1b0 [ 16.774222] Code: 00 8b 05 45 96 17 01 85 c0 7f 24 48 8b 5b 30 48 85 db 74 a5 8b 43 7c 85 c0 75 93 48 8b 33 48 c7 c7 6e 32 cc b7 e8 b2 5d 52 00 <0f> 0b 5b 5d c3 65 8b 05 76 31 18 49 89 c0 48 0f a3 05 bc 92 1a 01 [ 16.793016] RSP: 0018:ffffa44580523aa0 EFLAGS: 00010086 [ 16.798287] RAX: 0000000000000000 RBX: ffff8d7d0eb70a00 RCX: 0000000000000000 [ 16.805435] RDX: 0000000000000002 RSI: ffffffffb7c62d5f RDI: 00000000ffffffff [ 16.812610] RBP: 0000000000000287 R08: 0000000000000000 R09: ffffa445805238d0 [ 16.819759] R10: 0000000000000001 R11: 0000000000000001 R12: ffff8d7d0eb70a00 [ 16.826904] R13: ffff8d7d027370c8 R14: 0000000000000006 R15: ffffa44580523ad0 [ 16.834047] FS: 00007f9882fa2600(0000) GS:ffff8d80a0940000(0000) knlGS:0000000000000000 [ 16.842177] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 16.847966] CR2: 00007f9882bea3d8 CR3: 000000010b126001 CR4: 0000000000370ee0 [ 16.855144] Call Trace: [ 16.857614] clk_core_disable_lock+0x1b/0x30 [ 16.861941] intel_eth_pci_probe.cold+0x11d/0x136 [dwmac_intel] [ 16.867913] pci_device_probe+0xcf/0x150 [ 16.871890] really_probe+0xf5/0x3e0 [ 16.875526] driver_probe_device+0x64/0x150 [ 16.879763] device_driver_attach+0x53/0x60 [ 16.883998] __driver_attach+0x9f/0x150 [ 16.887883] ? device_driver_attach+0x60/0x60 [ 16.892288] ? device_driver_attach+0x60/0x60 [ 16.896698] bus_for_each_dev+0x77/0xc0 [ 16.900583] bus_add_driver+0x184/0x1f0 [ 16.904469] driver_register+0x6c/0xc0 [ 16.908268] ? 0xffffffffc07ae000 [ 16.911598] do_one_initcall+0x4a/0x210 [ 16.915489] ? kmem_cache_alloc_trace+0x305/0x4e0 [ 16.920247] do_init_module+0x5c/0x230 [ 16.924057] load_module+0x2894/0x2b70 [ 16.927857] ? __do_sys_finit_module+0xb5/0x120 [ 16.932441] __do_sys_finit_module+0xb5/0x120 [ 16.936845] do_syscall_64+0x42/0x80 [ 16.940476] entry_SYSCALL_64_after_hwframe+0x44/0xae [ 16.945586] RIP: 0033:0x7f98830e5ccd [ 16.949177] Code: 00 c3 66 2e 0f 1f 84 00 00 00 00 00 90 f3 0f 1e fa 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 93 31 0c 00 f7 d8 64 89 01 48 [ 16.967970] RSP: 002b:00007ffc66b60168 EFLAGS: 00000246 ORIG_RAX: 0000000000000139 [ 16.975583] RAX: ffffffffffffffda RBX: 000055885de35ef0 RCX: 00007f98830e5ccd [ 16.982725] RDX: 0000000000000000 RSI: 00007f98832541e3 RDI: 0000000000000012 [ 16.989868] RBP: 0000000000020000 R08: 0000000000000000 R09: 0000000000000000 [ 16.997042] R10: 0000000000000012 R11: 0000000000000246 R12: 00007f98832541e3 [ 17.004222] R13: 0000000000000000 R14: 0000000000000000 R15: 00007ffc66b60328 [ 17.011369] ---[ end trace df06a3dab26b988c ]--- [ 17.016062] ------------[ cut here ]------------ [ 17.020701] stmmac-0000:00:1e.5 already unprepared Removing the stmmac_bus_clks_config() call in stmmac_dvr_probe and let dwmac-intel to handle the unprepare and disable of the clk device. Fixes: 5ec55823 ("net: stmmac: add clocks management for gmac driver") Cc: Joakim Zhang <qiangqing.zhang@nxp.com> Signed-off-by:
Wong Vee Khee <vee.khee.wong@linux.intel.com> Reviewed-by:
Joakim Zhang <qiangqing.zhang@nxp.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Josh Triplett authored
If the user specifies a hostname or domain name as part of the ip= command-line option, preserve it and don't overwrite it with one supplied by DHCP/BOOTP. For instance, ip=::::myhostname::dhcp will use "myhostname" rather than ignoring and overwriting it. Fix the comment on ic_bootp_string that suggests it only copies a string "if not already set"; it doesn't have any such logic. Signed-off-by:
Josh Triplett <josh@joshtriplett.org> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linuDavid S. Miller authored
x/kernel/git/saeed/linux Saeed Mahameed says: ==================== mlx5 fixes 2021-06-01 This series introduces some fixes to mlx5 driver. Please pull and let me know if there is any problem. ==================== Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Daniel Borkmann authored
Commit 59438b46 ("security,lockdown,selinux: implement SELinux lockdown") added an implementation of the locked_down LSM hook to SELinux, with the aim to restrict which domains are allowed to perform operations that would breach lockdown. This is indirectly also getting audit subsystem involved to report events. The latter is problematic, as reported by Ondrej and Serhei, since it can bring down the whole system via audit: 1) The audit events that are triggered due to calls to security_locked_down() can OOM kill a machine, see below details [0]. 2) It also seems to be causing a deadlock via avc_has_perm()/slow_avc_audit() when trying to wake up kauditd, for example, when using trace_sched_switch() tracepoint, see details in [1]. Triggering this was not via some hypothetical corner case, but with existing tools like runqlat & runqslower from bcc, for example, which make use of this tracepoint. Rough call sequence goes like: rq_lock(rq) -> -------------------------+ trace_sched_switch() -> | bpf_prog_xyz() -> +-> deadlock selinux_lockdown() -> | audit_log_end() -> | wake_up_interruptible() -> | try_to_wake_up() -> | rq_lock(rq) --------------+ What's worse is that the intention of 59438b46 to further restrict lockdown settings for specific applications in respect to the global lockdown policy is completely broken for BPF. The SELinux policy rule for the current lockdown check looks something like this: allow <who> <who> : lockdown { <reason> }; However, this doesn't match with the 'current' task where the security_locked_down() is executed, example: httpd does a syscall. There is a tracing program attached to the syscall which triggers a BPF program to run, which ends up doing a bpf_probe_read_kernel{,_str}() helper call. The selinux_lockdown() hook does the permission check against 'current', that is, httpd in this example. httpd has literally zero relation to this tracing program, and it would be nonsensical having to write an SELinux policy rule against httpd to let the tracing helper pass. The policy in this case needs to be against the entity that is installing the BPF program. For example, if bpftrace would generate a histogram of syscall counts by user space application: bpftrace -e 'tracepoint:raw_syscalls:sys_enter { @[comm] = count(); }' bpftrace would then go and generate a BPF program from this internally. One way of doing it [for the sake of the example] could be to call bpf_get_current_task() helper and then access current->comm via one of bpf_probe_read_kernel{,_str}() helpers. So the program itself has nothing to do with httpd or any other random app doing a syscall here. The BPF program _explicitly initiated_ the lockdown check. The allow/deny policy belongs in the context of bpftrace: meaning, you want to grant bpftrace access to use these helpers, but other tracers on the system like my_random_tracer _not_. Therefore fix all three issues at the same time by taking a completely different approach for the security_locked_down() hook, that is, move the check into the program verification phase where we actually retrieve the BPF func proto. This also reliably gets the task (current) that is trying to install the BPF tracing program, e.g. bpftrace/bcc/perf/systemtap/etc, and it also fixes the OOM since we're moving this out of the BPF helper's fast-path which can be called several millions of times per second. The check is then also in line with other security_locked_down() hooks in the system where the enforcement is performed at open/load time, for example, open_kcore() for /proc/kcore access or module_sig_check() for module signatures just to pick few random ones. What's out of scope in the fix as well as in other security_locked_down() hook locations /outside/ of BPF subsystem is that if the lockdown policy changes on the fly there is no retrospective action. This requires a different discussion, potentially complex infrastructure, and it's also not clear whether this can be solved generically. Either way, it is out of scope for a suitable stable fix which this one is targeting. Note that the breakage is specifically on 59438b46 where it started to rely on 'current' as UAPI behavior, and _not_ earlier infrastructure such as 9d1f8be5 ("bpf: Restrict bpf when kernel lockdown is in confidentiality mode"). [0] https://bugzilla.redhat.com/show_bug.cgi?id=1955585, Jakub Hrozek says: I starting seeing this with F-34. When I run a container that is traced with BPF to record the syscalls it is doing, auditd is flooded with messages like: type=AVC msg=audit(1619784520.593:282387): avc: denied { confidentiality } for pid=476 comm="auditd" lockdown_reason="use of bpf to read kernel RAM" scontext=system_u:system_r:auditd_t:s0 tcontext=system_u:system_r:auditd_t:s0 tclass=lockdown permissive=0 This seems to be leading to auditd running out of space in the backlog buffer and eventually OOMs the machine. [...] auditd running at 99% CPU presumably processing all the messages, eventually I get: Apr 30 12:20:42 fedora kernel: audit: backlog limit exceeded Apr 30 12:20:42 fedora kernel: audit: backlog limit exceeded Apr 30 12:20:42 fedora kernel: audit: audit_backlog=2152579 > audit_backlog_limit=64 Apr 30 12:20:42 fedora kernel: audit: audit_backlog=2152626 > audit_backlog_limit=64 Apr 30 12:20:42 fedora kernel: audit: audit_backlog=2152694 > audit_backlog_limit=64 Apr 30 12:20:42 fedora kernel: audit: audit_lost=6878426 audit_rate_limit=0 audit_backlog_limit=64 Apr 30 12:20:45 fedora kernel: oci-seccomp-bpf invoked oom-killer: gfp_mask=0x100cca(GFP_HIGHUSER_MOVABLE), order=0, oom_score_adj=-1000 Apr 30 12:20:45 fedora kernel: CPU: 0 PID: 13284 Comm: oci-seccomp-bpf Not tainted 5.11.12-300.fc34.x86_64 #1 Apr 30 12:20:45 fedora kernel: Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.13.0-2.fc32 04/01/2014 [...] [1] https://lore.kernel.org/linux-audit/CANYvDQN7H5tVp47fbYcRasv4XF07eUbsDwT_eDCHXJUj43J7jQ@mail.gmail.com/, Serhei Makarov says: Upstream kernel 5.11.0-rc7 and later was found to deadlock during a bpf_probe_read_compat() call within a sched_switch tracepoint. The problem is reproducible with the reg_alloc3 testcase from SystemTap's BPF backend testsuite on x86_64 as well as the runqlat, runqslower tools from bcc on ppc64le. Example stack trace: [...] [ 730.868702] stack backtrace: [ 730.869590] CPU: 1 PID: 701 Comm: in:imjournal Not tainted, 5.12.0-0.rc2.20210309git144c79ef3353.166.fc35.x86_64 #1 [ 730.871605] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.13.0-2.fc32 04/01/2014 [ 730.873278] Call Trace: [ 730.873770] dump_stack+0x7f/0xa1 [ 730.874433] check_noncircular+0xdf/0x100 [ 730.875232] __lock_acquire+0x1202/0x1e10 [ 730.876031] ? __lock_acquire+0xfc0/0x1e10 [ 730.876844] lock_acquire+0xc2/0x3a0 [ 730.877551] ? __wake_up_common_lock+0x52/0x90 [ 730.878434] ? lock_acquire+0xc2/0x3a0 [ 730.879186] ? lock_is_held_type+0xa7/0x120 [ 730.880044] ? skb_queue_tail+0x1b/0x50 [ 730.880800] _raw_spin_lock_irqsave+0x4d/0x90 [ 730.881656] ? __wake_up_common_lock+0x52/0x90 [ 730.882532] __wake_up_common_lock+0x52/0x90 [ 730.883375] audit_log_end+0x5b/0x100 [ 730.884104] slow_avc_audit+0x69/0x90 [ 730.884836] avc_has_perm+0x8b/0xb0 [ 730.885532] selinux_lockdown+0xa5/0xd0 [ 730.886297] security_locked_down+0x20/0x40 [ 730.887133] bpf_probe_read_compat+0x66/0xd0 [ 730.887983] bpf_prog_250599c5469ac7b5+0x10f/0x820 [ 730.888917] trace_call_bpf+0xe9/0x240 [ 730.889672] perf_trace_run_bpf_submit+0x4d/0xc0 [ 730.890579] perf_trace_sched_switch+0x142/0x180 [ 730.891485] ? __schedule+0x6d8/0xb20 [ 730.892209] __schedule+0x6d8/0xb20 [ 730.892899] schedule+0x5b/0xc0 [ 730.893522] exit_to_user_mode_prepare+0x11d/0x240 [ 730.894457] syscall_exit_to_user_mode+0x27/0x70 [ 730.895361] entry_SYSCALL_64_after_hwframe+0x44/0xae [...] Fixes: 59438b46 ("security,lockdown,selinux: implement SELinux lockdown") Reported-by:
Ondrej Mosnacek <omosnace@redhat.com> Reported-by:
Jakub Hrozek <jhrozek@redhat.com> Reported-by:
Serhei Makarov <smakarov@redhat.com> Reported-by:
Jiri Olsa <jolsa@redhat.com> Signed-off-by:
Daniel Borkmann <daniel@iogearbox.net> Acked-by:
Alexei Starovoitov <ast@kernel.org> Tested-by:
Jiri Olsa <jolsa@redhat.com> Cc: Paul Moore <paul@paul-moore.com> Cc: James Morris <jamorris@linux.microsoft.com> Cc: Jerome Marchand <jmarchan@redhat.com> Cc: Frank Eigler <fche@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Link: https://lore.kernel.org/bpf/01135120-8bf7-df2e-cff0-1d73f1f841c3@iogearbox.net
-
- Jun 02, 2021
-
-
Pablo Neira Ayuso authored
The private helper data size cannot be updated. However, updates that contain NFCTH_PRIV_DATA_LEN might bogusly hit EBUSY even if the size is the same. Fixes: 12f7a505 ("netfilter: add user-space connection tracking helper infrastructure") Signed-off-by:
Pablo Neira Ayuso <pablo@netfilter.org>
-
Pablo Neira Ayuso authored
nft_ct_expect_obj_eval() calls nf_ct_ext_add() for a confirmed conntrack entry. However, nf_ct_ext_add() can only be called for !nf_ct_is_confirmed(). [ 1825.349056] WARNING: CPU: 0 PID: 1279 at net/netfilter/nf_conntrack_extend.c:48 nf_ct_xt_add+0x18e/0x1a0 [nf_conntrack] [ 1825.351391] RIP: 0010:nf_ct_ext_add+0x18e/0x1a0 [nf_conntrack] [ 1825.351493] Code: 41 5c 41 5d 41 5e 41 5f c3 41 bc 0a 00 00 00 e9 15 ff ff ff ba 09 00 00 00 31 f6 4c 89 ff e8 69 6c 3d e9 eb 96 45 31 ed eb cd <0f> 0b e9 b1 fe ff ff e8 86 79 14 e9 eb bf 0f 1f 40 00 0f 1f 44 00 [ 1825.351721] RSP: 0018:ffffc90002e1f1e8 EFLAGS: 00010202 [ 1825.351790] RAX: 000000000000000e RBX: ffff88814f5783c0 RCX: ffffffffc0e4f887 [ 1825.351881] RDX: dffffc0000000000 RSI: 0000000000000008 RDI: ffff88814f578440 [ 1825.351971] RBP: 0000000000000000 R08: 0000000000000000 R09: ffff88814f578447 [ 1825.352060] R10: ffffed1029eaf088 R11: 0000000000000001 R12: ffff88814f578440 [ 1825.352150] R13: ffff8882053f3a00 R14: 0000000000000000 R15: 0000000000000a20 [ 1825.352240] FS: 00007f992261c900(0000) GS:ffff889faec00000(0000) knlGS:0000000000000000 [ 1825.352343] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 1825.352417] CR2: 000056070a4d1158 CR3: 000000015efe0000 CR4: 0000000000350ee0 [ 1825.352508] Call Trace: [ 1825.352544] nf_ct_helper_ext_add+0x10/0x60 [nf_conntrack] [ 1825.352641] nft_ct_expect_obj_eval+0x1b8/0x1e0 [nft_ct] [ 1825.352716] nft_do_chain+0x232/0x850 [nf_tables] Add the ct helper extension only for unconfirmed conntrack. Skip rule evaluation if the ct helper extension does not exist. Thus, you can only create expectations from the first packet. It should be possible to remove this limitation by adding a new action to attach a generic ct helper to the first packet. Then, use this ct helper extension from follow up packets to create the ct expectation. While at it, add a missing check to skip the template conntrack too and remove check for IPCT_UNTRACK which is implicit to !ct. Fixes: 857b4602 ("netfilter: nft_ct: add ct expectations support") Signed-off-by:
Pablo Neira Ayuso <pablo@netfilter.org>
-