- Jan 24, 2023
-
-
Ilpo Järvinen authored
commit e8914b52 upstream. A local variable sg is used to store scatterlist pointer in pch_dma_tx_complete(). The for loop doing Tx byte accounting before dma_unmap_sg() alters sg in its increment statement. Therefore, the pointer passed into dma_unmap_sg() won't match to the one given to dma_map_sg(). To fix the problem, use priv->sg_tx_p directly in dma_unmap_sg() instead of the local variable. Fixes: da3564ee ("pch_uart: add multi-scatter processing") Cc: stable@vger.kernel.org Signed-off-by:
Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Link: https://lore.kernel.org/r/20230103093435.4396-1-ilpo.jarvinen@linux.intel.com Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Juhyung Park authored
commit dbd24ec1 upstream. The commit e00b488e ("usb-storage: Add Hiksemi USB3-FW to IGNORE_UAS") blacklists UAS for all of RTL9210 enclosures. The RTL9210 controller was advertised with UAS since its release back in 2019 and was shipped with a lot of enclosure products with different firmware combinations. Blacklist UAS only for HIKSEMI MD202. This should hopefully be replaced with more robust method than just comparing strings. But with limited information [1] provided thus far (dmesg when the device is plugged in, which includes manufacturer and product, but no lsusb -v to compare against), this is the best we can do for now. [1] https://lore.kernel.org/all/20230109115550.71688-1-qkrwngud825@gmail.com Fixes: e00b488e ("usb-storage: Add Hiksemi USB3-FW to IGNORE_UAS") Cc: Alan Stern <stern@rowland.harvard.edu> Cc: Hongling Zeng <zenghongling@kylinos.cn> Cc: stable@vger.kernel.org Signed-off-by:
Juhyung Park <qkrwngud825@gmail.com> Acked-by:
Oliver Neukum <oneukum@suse.com> Link: https://lore.kernel.org/r/20230117085154.123301-1-qkrwngud825@gmail.com Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Maciej Żenczykowski authored
commit c6ec9295 upstream. In Google internal bug 265639009 we've received an (as yet) unreproducible crash report from an aarch64 GKI 5.10.149-android13 running device. AFAICT the source code is at: https://android.googlesource.com/kernel/common/+/refs/tags/ASB-2022-12-05_13-5.10 The call stack is: ncm_close() -> ncm_notify() -> ncm_do_notify() with the crash at: ncm_do_notify+0x98/0x270 Code: 79000d0b b9000a6c f940012a f9400269 (b9405d4b) Which I believe disassembles to (I don't know ARM assembly, but it looks sane enough to me...): // halfword (16-bit) store presumably to event->wLength (at offset 6 of struct usb_cdc_notification) 0B 0D 00 79 strh w11, [x8, #6] // word (32-bit) store presumably to req->Length (at offset 8 of struct usb_request) 6C 0A 00 B9 str w12, [x19, #8] // x10 (NULL) was read here from offset 0 of valid pointer x9 // IMHO we're reading 'cdev->gadget' and getting NULL // gadget is indeed at offset 0 of struct usb_composite_dev 2A 01 40 F9 ldr x10, [x9] // loading req->buf pointer, which is at offset 0 of struct usb_request 69 02 40 F9 ldr x9, [x19] // x10 is null, crash, appears to be attempt to read cdev->gadget->max_speed 4B 5D 40 B9 ldr w11, [x10, #0x5c] which seems to line up with ncm_do_notify() case NCM_NOTIFY_SPEED code fragment: event->wLength = cpu_to_le16(8); req->length = NCM_STATUS_BYTECOUNT; /* SPEED_CHANGE data is up/down speeds in bits/sec */ data = req->buf + sizeof *event; data[0] = cpu_to_le32(ncm_bitrate(cdev->gadget)); My analysis of registers and NULL ptr deref crash offset (Unable to handle kernel NULL pointer dereference at virtual address 000000000000005c) heavily suggests that the crash is due to 'cdev->gadget' being NULL when executing: data[0] = cpu_to_le32(ncm_bitrate(cdev->gadget)); which calls: ncm_bitrate(NULL) which then calls: gadget_is_superspeed(NULL) which reads ((struct usb_gadget *)NULL)->max_speed and hits a panic. AFAICT, if I'm counting right, the offset of max_speed is indeed 0x5C. (remember there's a GKI KABI reservation of 16 bytes in struct work_struct) It's not at all clear to me how this is all supposed to work... but returning 0 seems much better than panic-ing... Cc: Felipe Balbi <balbi@kernel.org> Cc: Lorenzo Colitti <lorenzo@google.com> Cc: Carlos Llamas <cmllamas@google.com> Cc: stable@vger.kernel.org Signed-off-by:
Maciej Żenczykowski <maze@google.com> Cc: stable <stable@kernel.org> Link: https://lore.kernel.org/r/20230117131839.1138208-1-maze@google.com Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Daniel Scally authored
commit e95765e9 upstream. Currently the color matching descriptor is only sent across the wire a single time, following the descriptors for each format and frame. According to the UVC 1.5 Specification 3.9.2.6 ("Color Matching Descriptors"): "Only one instance is allowed for a given format and if present, the Color Matching descriptor shall be placed following the Video and Still Image Frame descriptors for that format". Add another reference to the color matching descriptor after the yuyv frames so that it's correctly transmitted for that format too. Fixes: a9914127 ("USB gadget: Webcam device") Cc: stable <stable@kernel.org> Signed-off-by:
Daniel Scally <dan.scally@ideasonboard.com> Reviewed-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by:
Kieran Bingham <kieran.bingham@ideasonboard.com> Link: https://lore.kernel.org/r/20221216160528.479094-1-dan.scally@ideasonboard.com Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Prashant Malani authored
commit 9682b41e upstream. Commit c1e5c2f0 ("usb: typec: altmodes/displayport: correct pin assignment for UFP receptacles") fixed the pin assignment calculation to take into account whether the peripheral was a plug or a receptacle. But the "pin_assignments" sysfs logic was not updated. Address this by using the macros introduced in the aforementioned commit in the sysfs logic too. Fixes: c1e5c2f0 ("usb: typec: altmodes/displayport: correct pin assignment for UFP receptacles") Cc: stable@vger.kernel.org Cc: Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by:
Prashant Malani <pmalani@chromium.org> Reviewed-by:
Benson Leung <bleung@chromium.org> Reviewed-by:
Heikki Krogerus <heikki.krogerus@linux.intel.com> Link: https://lore.kernel.org/r/20230111020546.3384569-2-pmalani@chromium.org Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Prashant Malani authored
commit 582836e3 upstream. The code to extract a peripheral's currently supported Pin Assignments is repeated in a couple of locations. Factor it out into a separate function. This will also make it easier to add fixes (we only need to update 1 location instead of 2). Fixes: c1e5c2f0 ("usb: typec: altmodes/displayport: correct pin assignment for UFP receptacles") Cc: stable@vger.kernel.org Cc: Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by:
Prashant Malani <pmalani@chromium.org> Reviewed-by:
Benson Leung <bleung@chromium.org> Reviewed-by:
Heikki Krogerus <heikki.krogerus@linux.intel.com> Link: https://lore.kernel.org/r/20230111020546.3384569-1-pmalani@chromium.org Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Alexander Stein authored
commit 5d3d01ae upstream. Commit ca07e1c1 ("drivers:usb:fsl:Make fsl ehci drv an independent driver module") changed DRV_NAME which was used for MODULE_ALIAS as well. Starting from this the module alias didn't match the platform device name created in fsl-mph-dr-of.c Change DRV_NAME to match the driver name for host mode in fsl-mph-dr-of. This is needed for module autoloading on ls1021a. Fixes: ca07e1c1 ("drivers:usb:fsl:Make fsl ehci drv an independent driver module") Cc: stable <stable@kernel.org> Signed-off-by:
Alexander Stein <alexander.stein@ew.tq-group.com> Link: https://lore.kernel.org/r/20230120122714.3848784-1-alexander.stein@ew.tq-group.com Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Michael Adler authored
commit 3f9e76e3 upstream. Add the USB serial console device ID for Siemens SCALANCE LPE-9000 which have a USB port for their serial console. Signed-off-by:
Michael Adler <michael.adler@siemens.com> Cc: stable@vger.kernel.org Signed-off-by:
Johan Hovold <johan@kernel.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Enzo Matsumiya authored
commit 30b2b219 upstream. On async reads, page data is allocated before sending. When the response is received but it has no data to fill (e.g. STATUS_END_OF_FILE), __calc_signature() will still include the pages in its computation, leading to an invalid signature check. This patch fixes this by not setting the async read smb_rqst page data (zeroed by default) if its got_bytes is 0. This can be reproduced/verified with xfstests generic/465. Cc: <stable@vger.kernel.org> Signed-off-by:
Enzo Matsumiya <ematsumiya@suse.de> Reviewed-by:
Paulo Alcantara (SUSE) <pc@cjr.nz> Signed-off-by:
Steve French <stfrench@microsoft.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Samuel Holland authored
commit 85094197 upstream. If the controller is suspended by runtime PM, the clock is already disabled, so do not try to disable it again during removal. Use pm_runtime_disable() to flush any pending runtime PM transitions. Fixes: 9a8e1e8c ("mmc: sunxi: Add runtime_pm support") Signed-off-by:
Samuel Holland <samuel@sholland.org> Acked-by:
Jernej Skrabec <jernej.skrabec@gmail.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20220810022509.43743-1-samuel@sholland.org Signed-off-by:
Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Ian Abbott authored
commit 2efb6edd upstream. (Actually, this is fixing the "Read the Current Status" command sent to the device's outgoing mailbox, but it is only currently used for the PWM instructions.) The PCI-1760 is operated mostly by sending commands to a set of Outgoing Mailbox registers, waiting for the command to complete, and reading the result from the Incoming Mailbox registers. One of these commands is the "Read the Current Status" command. The number of this command is 0x07 (see the User's Manual for the PCI-1760 at <https://advdownload.advantech.com/productfile/Downloadfile2/1-11P6653/PCI-1760.pdf>. The `PCI1760_CMD_GET_STATUS` macro defined in the driver should expand to this command number 0x07, but unfortunately it currently expands to 0x03. (Command number 0x03 is not defined in the User's Manual.) Correct the definition of the `PCI1760_CMD_GET_STATUS` macro to fix it. This is used by all the PWM subdevice related instructions handled by `pci1760_pwm_insn_config()` which are probably all broken. The effect of sending the undefined command number 0x03 is not known. Fixes: 14b93bb6 ("staging: comedi: adv_pci_dio: separate out PCI-1760 support") Cc: <stable@vger.kernel.org> # v4.5+ Signed-off-by:
Ian Abbott <abbotti@mev.co.uk> Link: https://lore.kernel.org/r/20230103143754.17564-1-abbotti@mev.co.uk Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Flavio Suligoi authored
commit 7171b0e2 upstream. The Texas Instruments TUSB8041 has an autosuspend problem at high temperature. If there is not USB traffic, after a couple of ms, the device enters in autosuspend mode. In this condition the external clock stops working, to save energy. When the USB activity turns on, ther hub exits the autosuspend state, the clock starts running again and all works fine. At ambient temperature all works correctly, but at high temperature, when the USB activity turns on, the external clock doesn't restart and the hub disappears from the USB bus. Disabling the autosuspend mode for this hub solves the issue. Signed-off-by:
Flavio Suligoi <f.suligoi@asem.it> Cc: stable <stable@kernel.org> Acked-by:
Alan Stern <stern@rowland.harvard.edu> Link: https://lore.kernel.org/r/20221219124759.3207032-1-f.suligoi@asem.it Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Greg Kroah-Hartman authored
commit 14ff7460 upstream. The USB_DEVICE_ID_CODEMERCS_IOW100 header size was incorrect, it should be 12, not 13. Cc: stable <stable@kernel.org> Fixes: 17a82716 ("USB: iowarrior: fix up report size handling for some devices") Reported-by:
Christoph Jung <jung@codemercs.com> Link: https://lore.kernel.org/r/20230120135330.3842518-1-gregkh@linuxfoundation.org Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Duke Xin(辛安文) authored
commit 71dfd381 upstream. The EM05CN modem has 2 USB configurations that are configurable via the AT command AT+QCFG="usbnet",[ 0 | 2 ] which make the modem enumerate with the following interfaces, respectively: "MBIM" : AT + MBIM + DIAG + NMEA + MODEM "RMNET" : AT + DIAG + NMEA + Modem + QMI The detailed description of the USB configuration for each mode as follows: MBIM Mode -------------- T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=2c7c ProdID=0312 Rev= 3.18 S: Manufacturer=Quectel S: Product=Quectel EM05-CN C:* #Ifs= 6 Cfg#= 1 Atr=a0 MxPwr=500mA A: FirstIf#= 1 IfCount= 2 Cls=02(comm.) Sub=0e Prot=00 I:* If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=83(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=85(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 5 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=87(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 1 Cls=02(comm.) Sub=0e Prot=00 Driver=cdc_mbim E: Ad=89(I) Atr=03(Int.) MxPS= 64 Ivl=32ms I: If#= 2 Alt= 0 #EPs= 0 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim I:* If#= 2 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim E: Ad=88(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms RMNET Mode -------------- T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 3 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=2c7c ProdID=0312 Rev= 3.18 S: Manufacturer=Quectel S: Product=Quectel EM05-CN C:* #Ifs= 5 Cfg#= 1 Atr=a0 MxPwr=500mA I:* If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=83(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=85(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 5 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=87(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 6 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) E: Ad=89(I) Atr=03(Int.) MxPS= 8 Ivl=32ms E: Ad=88(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms Signed-off-by:
Duke Xin(辛安文) <duke_xinanwen@163.com> Cc: stable@vger.kernel.org Signed-off-by:
Johan Hovold <johan@kernel.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Duke Xin(辛安文) authored
commit 1541dd00 upstream. The EM05CN (SG) modem has 2 USB configurations that are configurable via the AT command AT+QCFG="usbnet",[ 0 | 2 ] which make the modem enumerate with the following interfaces, respectively: "MBIM" : AT + MBIM + DIAG + NMEA + MODEM "RMNET" : AT + DIAG + NMEA + Modem + QMI The detailed description of the USB configuration for each mode as follows: MBIM Mode -------------- T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=2c7c ProdID=0310 Rev= 3.18 S: Manufacturer=Quectel S: Product=Quectel EM05-CN C:* #Ifs= 6 Cfg#= 1 Atr=a0 MxPwr=500mA A: FirstIf#= 1 IfCount= 2 Cls=02(comm.) Sub=0e Prot=00 I:* If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=83(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=85(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 5 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=87(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 1 Cls=02(comm.) Sub=0e Prot=00 Driver=cdc_mbim E: Ad=89(I) Atr=03(Int.) MxPS= 64 Ivl=32ms I: If#= 2 Alt= 0 #EPs= 0 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim I:* If#= 2 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim E: Ad=88(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms RMNET Mode -------------- T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 3 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=2c7c ProdID=0310 Rev= 3.18 S: Manufacturer=Quectel S: Product=Quectel EM05-CN C:* #Ifs= 5 Cfg#= 1 Atr=a0 MxPwr=500mA I:* If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=83(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=85(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 5 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=87(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 6 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) E: Ad=89(I) Atr=03(Int.) MxPS= 8 Ivl=32ms E: Ad=88(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms Signed-off-by:
Duke Xin(辛安文) <duke_xinanwen@163.com> Cc: stable@vger.kernel.org Signed-off-by:
Johan Hovold <johan@kernel.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Ali Mirghasemi authored
commit d9bbb158 upstream. Add support for EC200U modem 0x0901: EC200U - AT + AP + CP + NMEA + DIAG + MOS usb-device output: T: Bus=01 Lev=02 Prnt=02 Port=02 Cnt=01 Dev#= 4 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=2c7c ProdID=0901 Rev= 3.18 S: Manufacturer=Android S: Product=Android C:* #Ifs= 9 Cfg#= 1 Atr=e0 MxPwr=400mA A: FirstIf#= 0 IfCount= 2 Cls=02(comm.) Sub=06 Prot=00 I:* If#= 0 Alt= 0 #EPs= 1 Cls=02(comm.) Sub=06 Prot=00 Driver=cdc_ether E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=32ms I: If#= 1 Alt= 0 #EPs= 0 Cls=0a(data ) Sub=00 Prot=00 Driver=cdc_ether I:* If#= 1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=cdc_ether E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=83(I) Atr=03(Int.) MxPS= 512 Ivl=4096ms I:* If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 4 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 6 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=88(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=06(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 7 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=8a(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=07(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=89(I) Atr=03(Int.) MxPS= 512 Ivl=4096ms I:* If#= 8 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=8b(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=08(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms Signed-off-by:
Ali Mirghasemi <ali.mirghasemi1376@gmail.com> Cc: stable@vger.kernel.org Signed-off-by:
Johan Hovold <johan@kernel.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Duke Xin(辛安文) authored
commit b72d1397 upstream. The EM05-G (RS) modem has 2 USB configurations that are configurable via the AT command AT+QCFG="usbnet",[ 0 | 2 ] which make the modem enumerate with the following interfaces, respectively: "RMNET" : AT + DIAG + NMEA + Modem + QMI "MBIM" : MBIM + AT + DIAG + NMEA + Modem The detailed description of the USB configuration for each mode as follows: RMNET Mode -------------- T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 21 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=2c7c ProdID=0314 Rev= 3.18 S: Manufacturer=Quectel S: Product=Quectel EM05-G C:* #Ifs= 5 Cfg#= 1 Atr=a0 MxPwr=500mA I:* If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=83(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=85(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 5 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=87(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 6 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) E: Ad=89(I) Atr=03(Int.) MxPS= 8 Ivl=32ms E: Ad=88(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms MBIM Mode -------------- T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 16 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=2c7c ProdID=0314 Rev= 3.18 S: Manufacturer=Quectel S: Product=Quectel EM05-G C:* #Ifs= 6 Cfg#= 1 Atr=a0 MxPwr=500mA A: FirstIf#= 0 IfCount= 2 Cls=02(comm.) Sub=0e Prot=00 I:* If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=83(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=85(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 5 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=87(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 0 Alt= 0 #EPs= 1 Cls=02(comm.) Sub=0e Prot=00 Driver=cdc_mbim E: Ad=89(I) Atr=03(Int.) MxPS= 64 Ivl=32ms I: If#= 1 Alt= 0 #EPs= 0 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim I:* If#= 1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim E: Ad=88(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms Signed-off-by:
Duke Xin(辛安文) <duke_xinanwen@163.com> Cc: stable@vger.kernel.org Signed-off-by:
Johan Hovold <johan@kernel.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Duke Xin(辛安文) authored
commit bb78654b upstream. The EM05-G (CS) modem has 2 USB configurations that are configurable via the AT command AT+QCFG="usbnet",[ 0 | 2 ] which make the modem enumerate with the following interfaces, respectively: "RMNET" : AT + DIAG + NMEA + Modem + QMI "MBIM" : MBIM + AT + DIAG + NMEA + Modem The detailed description of the USB configuration for each mode as follows: RMNET Mode -------------- T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 21 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=2c7c ProdID=030C Rev= 3.18 S: Manufacturer=Quectel S: Product=Quectel EM05-G C:* #Ifs= 5 Cfg#= 1 Atr=a0 MxPwr=500mA I:* If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=83(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=85(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 5 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=87(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 6 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) E: Ad=89(I) Atr=03(Int.) MxPS= 8 Ivl=32ms E: Ad=88(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms MBIM Mode -------------- T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 16 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=2c7c ProdID=030C Rev= 3.18 S: Manufacturer=Quectel S: Product=Quectel EM05-G C:* #Ifs= 6 Cfg#= 1 Atr=a0 MxPwr=500mA A: FirstIf#= 0 IfCount= 2 Cls=02(comm.) Sub=0e Prot=00 I:* If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=83(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=85(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 5 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=87(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 0 Alt= 0 #EPs= 1 Cls=02(comm.) Sub=0e Prot=00 Driver=cdc_mbim E: Ad=89(I) Atr=03(Int.) MxPS= 64 Ivl=32ms I: If#= 1 Alt= 0 #EPs= 0 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim I:* If#= 1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim E: Ad=88(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms Signed-off-by:
Duke Xin(辛安文) <duke_xinanwen@163.com> Cc: stable@vger.kernel.org Signed-off-by:
Johan Hovold <johan@kernel.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Duke Xin(辛安文) authored
commit 6c331f32 upstream. The EM05-G (GR) modem has 2 USB configurations that are configurable via the AT command AT+QCFG="usbnet",[ 0 | 2 ] which make the modem enumerate with the following interfaces, respectively: "RMNET" : AT + DIAG + NMEA + Modem + QMI "MBIM" : MBIM + AT + DIAG + NMEA + Modem The detailed description of the USB configuration for each mode as follows: RMNET Mode -------------- T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 21 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=2c7c ProdID=0313 Rev= 3.18 S: Manufacturer=Quectel S: Product=Quectel EM05-G C:* #Ifs= 5 Cfg#= 1 Atr=a0 MxPwr=500mA I:* If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=83(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=85(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 5 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=87(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 6 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) E: Ad=89(I) Atr=03(Int.) MxPS= 8 Ivl=32ms E: Ad=88(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms MBIM Mode -------------- T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 16 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=2c7c ProdID=0313 Rev= 3.18 S: Manufacturer=Quectel S: Product=Quectel EM05-G C:* #Ifs= 6 Cfg#= 1 Atr=a0 MxPwr=500mA A: FirstIf#= 0 IfCount= 2 Cls=02(comm.) Sub=0e Prot=00 I:* If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=83(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=85(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 5 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=87(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 0 Alt= 0 #EPs= 1 Cls=02(comm.) Sub=0e Prot=00 Driver=cdc_mbim E: Ad=89(I) Atr=03(Int.) MxPS= 64 Ivl=32ms I: If#= 1 Alt= 0 #EPs= 0 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim I:* If#= 1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim E: Ad=88(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms Signed-off-by:
Duke Xin(辛安文) <duke_xinanwen@163.com> Cc: stable@vger.kernel.org Signed-off-by:
Johan Hovold <johan@kernel.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Greg Kroah-Hartman authored
commit 73979060 upstream. do_prlimit() adds the user-controlled resource value to a pointer that will subsequently be dereferenced. In order to help prevent this codepath from being used as a spectre "gadget" a barrier needs to be added after checking the range. Reported-by:
Jordy Zomer <jordyzomer@google.com> Tested-by:
Jordy Zomer <jordyzomer@google.com> Suggested-by:
Linus Torvalds <torvalds@linuxfoundation.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Mathias Nyman authored
commit 0522b9a1 upstream. One USB3 roothub port may support link power management, while another root port on the same xHC can't due to different retimers used for the ports. This is the case with Intel Alder Lake, and possible future platforms where retimers used for USB4 ports cause too long exit latecy to enable native USB3 lpm U1 and U2 states. Add a flag in the xhci port structure to indicate if the port is lpm_incapable, and check it while calculating exit latency. Cc: stable@vger.kernel.org Signed-off-by:
Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20230116142216.1141605-6-mathias.nyman@linux.intel.com Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Mathias Nyman authored
commit a2bc47c4 upstream. Make sure xhci_free_dev() and xhci_kill_endpoint_urbs() do not race and cause null pointer dereference when host suddenly dies. Usb core may call xhci_free_dev() which frees the xhci->devs[slot_id] virt device at the same time that xhci_kill_endpoint_urbs() tries to loop through all the device's endpoints, checking if there are any cancelled urbs left to give back. hold the xhci spinlock while freeing the virt device Cc: stable@vger.kernel.org Signed-off-by:
Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20230116142216.1141605-4-mathias.nyman@linux.intel.com Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Jimmy Hu authored
commit e8fb5bc7 upstream. When the host controller is not responding, all URBs queued to all endpoints need to be killed. This can cause a kernel panic if we dereference an invalid endpoint. Fix this by using xhci_get_virt_ep() helper to find the endpoint and checking if the endpoint is valid before dereferencing it. [233311.853271] xhci-hcd xhci-hcd.1.auto: xHCI host controller not responding, assume dead [233311.853393] Unable to handle kernel NULL pointer dereference at virtual address 00000000000000e8 [233311.853964] pc : xhci_hc_died+0x10c/0x270 [233311.853971] lr : xhci_hc_died+0x1ac/0x270 [233311.854077] Call trace: [233311.854085] xhci_hc_died+0x10c/0x270 [233311.854093] xhci_stop_endpoint_command_watchdog+0x100/0x1a4 [233311.854105] call_timer_fn+0x50/0x2d4 [233311.854112] expire_timers+0xac/0x2e4 [233311.854118] run_timer_softirq+0x300/0xabc [233311.854127] __do_softirq+0x148/0x528 [233311.854135] irq_exit+0x194/0x1a8 [233311.854143] __handle_domain_irq+0x164/0x1d0 [233311.854149] gic_handle_irq.22273+0x10c/0x188 [233311.854156] el1_irq+0xfc/0x1a8 [233311.854175] lpm_cpuidle_enter+0x25c/0x418 [msm_pm] [233311.854185] cpuidle_enter_state+0x1f0/0x764 [233311.854194] do_idle+0x594/0x6ac [233311.854201] cpu_startup_entry+0x7c/0x80 [233311.854209] secondary_start_kernel+0x170/0x198 Fixes: 50e8725e ("xhci: Refactor command watchdog and fix split string.") Cc: stable@vger.kernel.org Signed-off-by:
Jimmy Hu <hhhuuu@google.com> Signed-off-by:
Mathias Nyman <mathias.nyman@linux.intel.com> Message-ID: <0fe978ed-8269-9774-1c40-f8a98c17e838@linux.intel.com> Link: https://lore.kernel.org/r/20230116142216.1141605-3-mathias.nyman@linux.intel.com Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Ricardo Ribalda authored
commit 93915a41 upstream. Allow devices to have dma operations beyond 64K, and avoid warnings such as: xhci_hcd 0000:00:14.0: mapping sg segment longer than device claims to support [len=98304] [max=65536] Cc: stable@vger.kernel.org Cc: Takashi Iwai <tiwai@suse.de> Signed-off-by:
Ricardo Ribalda <ribalda@chromium.org> Signed-off-by:
Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20230116142216.1141605-2-mathias.nyman@linux.intel.com Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Ryusuke Konishi authored
commit 7633355e upstream. If nilfs2 reads a corrupted disk image and tries to reads a b-tree node block by calling __nilfs_btree_get_block() against an invalid virtual block address, it returns -ENOENT because conversion of the virtual block address to a disk block address fails. However, this return value is the same as the internal code that b-tree lookup routines return to indicate that the block being searched does not exist, so functions that operate on that b-tree may misbehave. When nilfs_btree_insert() receives this spurious 'not found' code from nilfs_btree_do_lookup(), it misunderstands that the 'not found' check was successful and continues the insert operation using incomplete lookup path data, causing the following crash: general protection fault, probably for non-canonical address 0xdffffc0000000005: 0000 [#1] PREEMPT SMP KASAN KASAN: null-ptr-deref in range [0x0000000000000028-0x000000000000002f] ... RIP: 0010:nilfs_btree_get_nonroot_node fs/nilfs2/btree.c:418 [inline] RIP: 0010:nilfs_btree_prepare_insert fs/nilfs2/btree.c:1077 [inline] RIP: 0010:nilfs_btree_insert+0x6d3/0x1c10 fs/nilfs2/btree.c:1238 Code: bc 24 80 00 00 00 4c 89 f8 48 c1 e8 03 42 80 3c 28 00 74 08 4c 89 ff e8 4b 02 92 fe 4d 8b 3f 49 83 c7 28 4c 89 f8 48 c1 e8 03 <42> 80 3c 28 00 74 08 4c 89 ff e8 2e 02 92 fe 4d 8b 3f 49 83 c7 02 ... Call Trace: <TASK> nilfs_bmap_do_insert fs/nilfs2/bmap.c:121 [inline] nilfs_bmap_insert+0x20d/0x360 fs/nilfs2/bmap.c:147 nilfs_get_block+0x414/0x8d0 fs/nilfs2/inode.c:101 __block_write_begin_int+0x54c/0x1a80 fs/buffer.c:1991 __block_write_begin fs/buffer.c:2041 [inline] block_write_begin+0x93/0x1e0 fs/buffer.c:2102 nilfs_write_begin+0x9c/0x110 fs/nilfs2/inode.c:261 generic_perform_write+0x2e4/0x5e0 mm/filemap.c:3772 __generic_file_write_iter+0x176/0x400 mm/filemap.c:3900 generic_file_write_iter+0xab/0x310 mm/filemap.c:3932 call_write_iter include/linux/fs.h:2186 [inline] new_sync_write fs/read_write.c:491 [inline] vfs_write+0x7dc/0xc50 fs/read_write.c:584 ksys_write+0x177/0x2a0 fs/read_write.c:637 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x3d/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd ... </TASK> This patch fixes the root cause of this problem by replacing the error code that __nilfs_btree_get_block() returns on block address conversion failure from -ENOENT to another internal code -EINVAL which means that the b-tree metadata is corrupted. By returning -EINVAL, it propagates without glitches, and for all relevant b-tree operations, functions in the upper bmap layer output an error message indicating corrupted b-tree metadata via nilfs_bmap_convert_error(), and code -EIO will be eventually returned as it should be. Link: https://lkml.kernel.org/r/000000000000bd89e205f0e38355@google.com Link: https://lkml.kernel.org/r/20230105055356.8811-1-konishi.ryusuke@gmail.com Signed-off-by:
Ryusuke Konishi <konishi.ryusuke@gmail.com> Reported-by:
<syzbot+ede796cecd5296353515@syzkaller.appspotmail.com> Tested-by:
Ryusuke Konishi <konishi.ryusuke@gmail.com> Cc: <stable@vger.kernel.org> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Shawn.Shao authored
commit 57054fe5 upstream. Since there is no protection for vd, a kernel panic will be triggered here in exceptional cases. You can refer to the processing of axi_chan_block_xfer_complete function The triggered kernel panic is as follows: [ 67.848444] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000060 [ 67.848447] Mem abort info: [ 67.848449] ESR = 0x96000004 [ 67.848451] EC = 0x25: DABT (current EL), IL = 32 bits [ 67.848454] SET = 0, FnV = 0 [ 67.848456] EA = 0, S1PTW = 0 [ 67.848458] Data abort info: [ 67.848460] ISV = 0, ISS = 0x00000004 [ 67.848462] CM = 0, WnR = 0 [ 67.848465] user pgtable: 4k pages, 48-bit VAs, pgdp=00000800c4c0b000 [ 67.848468] [0000000000000060] pgd=0000000000000000, p4d=0000000000000000 [ 67.848472] Internal error: Oops: 96000004 [#1] SMP [ 67.848475] Modules linked in: dmatest [ 67.848479] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.10.100-emu_x2rc+ #11 [ 67.848483] pstate: 62000085 (nZCv daIf -PAN -UAO +TCO BTYPE=--) [ 67.848487] pc : axi_chan_handle_err+0xc4/0x230 [ 67.848491] lr : axi_chan_handle_err+0x30/0x230 [ 67.848493] sp : ffff0803fe55ae50 [ 67.848495] x29: ffff0803fe55ae50 x28: ffff800011212200 [ 67.848500] x27: ffff0800c42c0080 x26: ffff0800c097c080 [ 67.848504] x25: ffff800010d33880 x24: ffff80001139d850 [ 67.848508] x23: ffff0800c097c168 x22: 0000000000000000 [ 67.848512] x21: 0000000000000080 x20: 0000000000002000 [ 67.848517] x19: ffff0800c097c080 x18: 0000000000000000 [ 67.848521] x17: 0000000000000000 x16: 0000000000000000 [ 67.848525] x15: 0000000000000000 x14: 0000000000000000 [ 67.848529] x13: 0000000000000000 x12: 0000000000000040 [ 67.848533] x11: ffff0800c0400248 x10: ffff0800c040024a [ 67.848538] x9 : ffff800010576cd4 x8 : ffff0800c0400270 [ 67.848542] x7 : 0000000000000000 x6 : ffff0800c04003e0 [ 67.848546] x5 : ffff0800c0400248 x4 : ffff0800c4294480 [ 67.848550] x3 : dead000000000100 x2 : dead000000000122 [ 67.848555] x1 : 0000000000000100 x0 : ffff0800c097c168 [ 67.848559] Call trace: [ 67.848562] axi_chan_handle_err+0xc4/0x230 [ 67.848566] dw_axi_dma_interrupt+0xf4/0x590 [ 67.848569] __handle_irq_event_percpu+0x60/0x220 [ 67.848573] handle_irq_event+0x64/0x120 [ 67.848576] handle_fasteoi_irq+0xc4/0x220 [ 67.848580] __handle_domain_irq+0x80/0xe0 [ 67.848583] gic_handle_irq+0xc0/0x138 [ 67.848585] el1_irq+0xc8/0x180 [ 67.848588] arch_cpu_idle+0x14/0x2c [ 67.848591] default_idle_call+0x40/0x16c [ 67.848594] do_idle+0x1f0/0x250 [ 67.848597] cpu_startup_entry+0x2c/0x60 [ 67.848600] rest_init+0xc0/0xcc [ 67.848603] arch_call_rest_init+0x14/0x1c [ 67.848606] start_kernel+0x4cc/0x500 [ 67.848610] Code: eb0002ff 9a9f12d6 f2fbd5a2 f2fbd5a3 (a94602c1) [ 67.848613] ---[ end trace 585a97036f88203a ]--- Signed-off-by:
Shawn.Shao <shawn.shao@jaguarmicro.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20230112055802.1764-1-shawn.shao@jaguarmicro.com Signed-off-by:
Vinod Koul <vkoul@kernel.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Jaegeuk Kim authored
[ Upstream commit df9d44b6 ] This patch avoids the below panic. pc : __lookup_extent_tree+0xd8/0x760 lr : f2fs_do_write_data_page+0x104/0x87c sp : ffffffc010cbb3c0 x29: ffffffc010cbb3e0 x28: 0000000000000000 x27: ffffff8803e7f020 x26: ffffff8803e7ed40 x25: ffffff8803e7f020 x24: ffffffc010cbb460 x23: ffffffc010cbb480 x22: 0000000000000000 x21: 0000000000000000 x20: ffffffff22e90900 x19: 0000000000000000 x18: ffffffc010c5d080 x17: 0000000000000000 x16: 0000000000000020 x15: ffffffdb1acdbb88 x14: ffffff888759e2b0 x13: 0000000000000000 x12: ffffff802da49000 x11: 000000000a001200 x10: ffffff8803e7ed40 x9 : ffffff8023195800 x8 : ffffff802da49078 x7 : 0000000000000001 x6 : 0000000000000000 x5 : 0000000000000006 x4 : ffffffc010cbba28 x3 : 0000000000000000 x2 : ffffffc010cbb480 x1 : 0000000000000000 x0 : ffffff8803e7ed40 Call trace: __lookup_extent_tree+0xd8/0x760 f2fs_do_write_data_page+0x104/0x87c f2fs_write_single_data_page+0x420/0xb60 f2fs_write_cache_pages+0x418/0xb1c __f2fs_write_data_pages+0x428/0x58c f2fs_write_data_pages+0x30/0x40 do_writepages+0x88/0x190 __writeback_single_inode+0x48/0x448 writeback_sb_inodes+0x468/0x9e8 __writeback_inodes_wb+0xb8/0x2a4 wb_writeback+0x33c/0x740 wb_do_writeback+0x2b4/0x400 wb_workfn+0xe4/0x34c process_one_work+0x24c/0x5bc worker_thread+0x3e8/0xa50 kthread+0x150/0x1b4 Signed-off-by:
Jaegeuk Kim <jaegeuk@kernel.org> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Jiri Slaby (SUSE) authored
[ Upstream commit 56c5dab2 ] Since gcc13, each member of an enum has the same type as the enum [1]. And that is inherited from its members. Provided these two: SRP_TAG_NO_REQ = ~0U, SRP_TAG_TSK_MGMT = 1U << 31 all other members are unsigned ints. Esp. with SRP_MAX_SGE and SRP_TSK_MGMT_SQ_SIZE and their use in min(), this results in the following warnings: include/linux/minmax.h:20:35: error: comparison of distinct pointer types lacks a cast drivers/infiniband/ulp/srp/ib_srp.c:563:42: note: in expansion of macro 'min' include/linux/minmax.h:20:35: error: comparison of distinct pointer types lacks a cast drivers/infiniband/ulp/srp/ib_srp.c:2369:27: note: in expansion of macro 'min' So move the large values away to a separate enum, so that they don't affect other members. [1] https://gcc.gnu.org/bugzilla/show_bug.cgi?id=36113 Link: https://lore.kernel.org/r/20221212120411.13750-1-jirislaby@kernel.org Signed-off-by:
Jiri Slaby (SUSE) <jirislaby@kernel.org> Reviewed-by:
Bart Van Assche <bvanassche@acm.org> Signed-off-by:
Leon Romanovsky <leon@kernel.org> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Daniil Tatianin authored
[ Upstream commit 9deb1e9f ] It's not very useful to copy back an empty ethtool_stats struct and return 0 if we didn't actually have any stats. This also allows for further simplification of this function in the future commits. Signed-off-by:
Daniil Tatianin <d-tatianin@yandex-team.ru> Reviewed-by:
Andrew Lunn <andrew@lunn.ch> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Olga Kornievskaia authored
[ Upstream commit a6b9d2fa ] When there is a single DS no striping constraints need to be placed on the IO. When such constraint is applied then buffered reads don't coalesce to the DS's rsize. Signed-off-by:
Olga Kornievskaia <kolga@netapp.com> Signed-off-by:
Trond Myklebust <trond.myklebust@hammerspace.com> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
- Jan 18, 2023
-
-
Greg Kroah-Hartman authored
Link: https://lore.kernel.org/r/20230116154847.246743274@linuxfoundation.org Tested-by:
Pavel Machek (CIP) <pavel@denx.de> Tested-by:
Shuah Khan <skhan@linuxfoundation.org> Tested-by:
Jon Hunter <jonathanh@nvidia.com> Tested-by:
Sudip Mukherjee <sudip.mukherjee@codethink.co.uk> Link: https://lore.kernel.org/r/20230117124624.496082438@linuxfoundation.org Tested-by:
Guenter Roeck <linux@roeck-us.net> Tested-by:
Linux Kernel Functional Testing <lkft@linaro.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Patrik John authored
commit b40de746 upstream. The current implementation uses 0 as lower limit for the baud rate tolerance for tegra20 and tegra30 chips which causes isses on UART initialization as soon as baud rate clock is lower than required even when within the standard UART tolerance of +/- 4%. This fix aligns the implementation with the initial commit description of +/- 4% tolerance for tegra chips other than tegra186 and tegra194. Fixes: d781ec21 ("serial: tegra: report clk rate errors") Cc: stable <stable@vger.kernel.org> Signed-off-by:
Patrik John <patrik.john@u-blox.com> Link: https://lore.kernel.org/r/sig.19614244f8.20211123132737.88341-1-patrik.john@u-blox.com Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Jon Hunter authored
commit cc9ca4d9 upstream. The Tegra serial driver always prints an error message when enabling the FIFO for devices that have support for checking the FIFO enable status. Fix this by displaying the error message, only when an error occurs. Finally, update the error message to make it clear that enabling the FIFO failed and display the error code. Fixes: 222dcdff ("serial: tegra: check for FIFO mode enabled status") Cc: <stable@vger.kernel.org> Acked-by:
Thierry Reding <treding@nvidia.com> Signed-off-by:
Jon Hunter <jonathanh@nvidia.com> Link: https://lore.kernel.org/r/20210630125643.264264-1-jonathanh@nvidia.com Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Dmitry Osipenko authored
commit 1f69a127 upstream. It is possible to get an instant RX timeout or end-of-transfer interrupt before RX DMA was started, if transaction is less than 16 bytes. Transfer should be handled in PIO mode in this case because DMA can't handle it. This patch brings back the original behaviour of the driver that was changed by accident by a previous commit, it fixes occasional Bluetooth HW initialization failures which I started to notice recently. Fixes: d5e3fadb ("tty: serial: tegra: Activate RX DMA transfer by request") Signed-off-by:
Dmitry Osipenko <digetx@gmail.com> Link: https://lore.kernel.org/r/20200209164415.9632-1-digetx@gmail.com Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Ferry Toth authored
commit b659b613 upstream. This reverts commit 8a7b31d5. This patch results in some qemu test failures, specifically xilinx-zynq-a9 machine and zynq-zc702 as well as zynq-zed devicetree files, when trying to boot from USB drive. Link: https://lore.kernel.org/lkml/20221220194334.GA942039@roeck-us.net/ Fixes: 8a7b31d5 ("usb: ulpi: defer ulpi_register on ulpi_read_id timeout") Cc: stable@vger.kernel.org Reported-by:
Guenter Roeck <linux@roeck-us.net> Signed-off-by:
Ferry Toth <ftoth@exalondelft.nl> Link: https://lore.kernel.org/r/20221222205302.45761-1-ftoth@exalondelft.nl Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Johan Hovold authored
[ Upstream commit 703c13fe ] In cases where runtime services are not supported or have been disabled, the runtime services workqueue will never have been allocated. Do not try to destroy the workqueue unconditionally in the unlikely event that EFI initialisation fails to avoid dereferencing a NULL pointer. Fixes: 98086df8 ("efi: add missed destroy_workqueue when efisubsys_init fails") Cc: stable@vger.kernel.org Cc: Li Heng <liheng40@huawei.com> Signed-off-by:
Johan Hovold <johan+linaro@kernel.org> Signed-off-by:
Ard Biesheuvel <ardb@kernel.org> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Mark Rutland authored
[ Upstream commit 031af500 ] The inline assembly for arm64's cmpxchg_double*() implementations use a +Q constraint to hazard against other accesses to the memory location being exchanged. However, the pointer passed to the constraint is a pointer to unsigned long, and thus the hazard only applies to the first 8 bytes of the location. GCC can take advantage of this, assuming that other portions of the location are unchanged, leading to a number of potential problems. This is similar to what we fixed back in commit: fee960be ("arm64: xchg: hazard against entire exchange variable") ... but we forgot to adjust cmpxchg_double*() similarly at the same time. The same problem applies, as demonstrated with the following test: | struct big { | u64 lo, hi; | } __aligned(128); | | unsigned long foo(struct big *b) | { | u64 hi_old, hi_new; | | hi_old = b->hi; | cmpxchg_double_local(&b->lo, &b->hi, 0x12, 0x34, 0x56, 0x78); | hi_new = b->hi; | | return hi_old ^ hi_new; | } ... which GCC 12.1.0 compiles as: | 0000000000000000 <foo>: | 0: d503233f paciasp | 4: aa0003e4 mov x4, x0 | 8: 1400000e b 40 <foo+0x40> | c: d2800240 mov x0, #0x12 // #18 | 10: d2800681 mov x1, #0x34 // #52 | 14: aa0003e5 mov x5, x0 | 18: aa0103e6 mov x6, x1 | 1c: d2800ac2 mov x2, #0x56 // #86 | 20: d2800f03 mov x3, #0x78 // #120 | 24: 48207c82 casp x0, x1, x2, x3, [x4] | 28: ca050000 eor x0, x0, x5 | 2c: ca060021 eor x1, x1, x6 | 30: aa010000 orr x0, x0, x1 | 34: d2800000 mov x0, #0x0 // #0 <--- BANG | 38: d50323bf autiasp | 3c: d65f03c0 ret | 40: d2800240 mov x0, #0x12 // #18 | 44: d2800681 mov x1, #0x34 // #52 | 48: d2800ac2 mov x2, #0x56 // #86 | 4c: d2800f03 mov x3, #0x78 // #120 | 50: f9800091 prfm pstl1strm, [x4] | 54: c87f1885 ldxp x5, x6, [x4] | 58: ca0000a5 eor x5, x5, x0 | 5c: ca0100c6 eor x6, x6, x1 | 60: aa0600a6 orr x6, x5, x6 | 64: b5000066 cbnz x6, 70 <foo+0x70> | 68: c8250c82 stxp w5, x2, x3, [x4] | 6c: 35ffff45 cbnz w5, 54 <foo+0x54> | 70: d2800000 mov x0, #0x0 // #0 <--- BANG | 74: d50323bf autiasp | 78: d65f03c0 ret Notice that at the lines with "BANG" comments, GCC has assumed that the higher 8 bytes are unchanged by the cmpxchg_double() call, and that `hi_old ^ hi_new` can be reduced to a constant zero, for both LSE and LL/SC versions of cmpxchg_double(). This patch fixes the issue by passing a pointer to __uint128_t into the +Q constraint, ensuring that the compiler hazards against the entire 16 bytes being modified. With this change, GCC 12.1.0 compiles the above test as: | 0000000000000000 <foo>: | 0: f9400407 ldr x7, [x0, #8] | 4: d503233f paciasp | 8: aa0003e4 mov x4, x0 | c: 1400000f b 48 <foo+0x48> | 10: d2800240 mov x0, #0x12 // #18 | 14: d2800681 mov x1, #0x34 // #52 | 18: aa0003e5 mov x5, x0 | 1c: aa0103e6 mov x6, x1 | 20: d2800ac2 mov x2, #0x56 // #86 | 24: d2800f03 mov x3, #0x78 // #120 | 28: 48207c82 casp x0, x1, x2, x3, [x4] | 2c: ca050000 eor x0, x0, x5 | 30: ca060021 eor x1, x1, x6 | 34: aa010000 orr x0, x0, x1 | 38: f9400480 ldr x0, [x4, #8] | 3c: d50323bf autiasp | 40: ca0000e0 eor x0, x7, x0 | 44: d65f03c0 ret | 48: d2800240 mov x0, #0x12 // #18 | 4c: d2800681 mov x1, #0x34 // #52 | 50: d2800ac2 mov x2, #0x56 // #86 | 54: d2800f03 mov x3, #0x78 // #120 | 58: f9800091 prfm pstl1strm, [x4] | 5c: c87f1885 ldxp x5, x6, [x4] | 60: ca0000a5 eor x5, x5, x0 | 64: ca0100c6 eor x6, x6, x1 | 68: aa0600a6 orr x6, x5, x6 | 6c: b5000066 cbnz x6, 78 <foo+0x78> | 70: c8250c82 stxp w5, x2, x3, [x4] | 74: 35ffff45 cbnz w5, 5c <foo+0x5c> | 78: f9400480 ldr x0, [x4, #8] | 7c: d50323bf autiasp | 80: ca0000e0 eor x0, x7, x0 | 84: d65f03c0 ret ... sampling the high 8 bytes before and after the cmpxchg, and performing an EOR, as we'd expect. For backporting, I've tested this atop linux-4.9.y with GCC 5.5.0. Note that linux-4.9.y is oldest currently supported stable release, and mandates GCC 5.1+. Unfortunately I couldn't get a GCC 5.1 binary to run on my machines due to library incompatibilities. I've also used a standalone test to check that we can use a __uint128_t pointer in a +Q constraint at least as far back as GCC 4.8.5 and LLVM 3.9.1. Fixes: 5284e1b4 ("arm64: xchg: Implement cmpxchg_double") Fixes: e9a4b795 ("arm64: cmpxchg_dbl: patch in lse instructions when supported by the CPU") Reported-by:
Boqun Feng <boqun.feng@gmail.com> Link: https://lore.kernel.org/lkml/Y6DEfQXymYVgL3oJ@boqun-archlinux/ Reported-by:
Peter Zijlstra <peterz@infradead.org> Link: https://lore.kernel.org/lkml/Y6GXoO4qmH9OIZ5Q@hirez.programming.kicks-ass.net/ Signed-off-by:
Mark Rutland <mark.rutland@arm.com> Cc: stable@vger.kernel.org Cc: Arnd Bergmann <arnd@arndb.de> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Steve Capper <steve.capper@arm.com> Cc: Will Deacon <will@kernel.org> Link: https://lore.kernel.org/r/20230104151626.3262137-1-mark.rutland@arm.com Signed-off-by:
Will Deacon <will@kernel.org> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Rob Clark authored
[ Upstream commit 52531258 ] Userspace can guess the handle value and try to race GEM object creation with handle close, resulting in a use-after-free if we dereference the object after dropping the handle's reference. For that reason, dropping the handle's reference must be done *after* we are done dereferencing the object. Signed-off-by:
Rob Clark <robdclark@chromium.org> Reviewed-by:
Chia-I Wu <olvaffe@gmail.com> Fixes: 62fb7a5e ("virtio-gpu: add 3d/virgl support") Cc: stable@vger.kernel.org Signed-off-by:
Dmitry Osipenko <dmitry.osipenko@collabora.com> Link: https://patchwork.freedesktop.org/patch/msgid/20221216233355.542197-2-robdclark@gmail.com Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Peter Newman authored
[ Upstream commit fe1f0714 ] When the user moves a running task to a new rdtgroup using the task's file interface or by deleting its rdtgroup, the resulting change in CLOSID/RMID must be immediately propagated to the PQR_ASSOC MSR on the task(s) CPUs. x86 allows reordering loads with prior stores, so if the task starts running between a task_curr() check that the CPU hoisted before the stores in the CLOSID/RMID update then it can start running with the old CLOSID/RMID until it is switched again because __rdtgroup_move_task() failed to determine that it needs to be interrupted to obtain the new CLOSID/RMID. Refer to the diagram below: CPU 0 CPU 1 ----- ----- __rdtgroup_move_task(): curr <- t1->cpu->rq->curr __schedule(): rq->curr <- t1 resctrl_sched_in(): t1->{closid,rmid} -> {1,1} t1->{closid,rmid} <- {2,2} if (curr == t1) // false IPI(t1->cpu) A similar race impacts rdt_move_group_tasks(), which updates tasks in a deleted rdtgroup. In both cases, use smp_mb() to order the task_struct::{closid,rmid} stores before the loads in task_curr(). In particular, in the rdt_move_group_tasks() case, simply execute an smp_mb() on every iteration with a matching task. It is possible to use a single smp_mb() in rdt_move_group_tasks(), but this would require two passes and a means of remembering which task_structs were updated in the first loop. However, benchmarking results below showed too little performance impact in the simple approach to justify implementing the two-pass approach. Times below were collected using `perf stat` to measure the time to remove a group containing a 1600-task, parallel workload. CPU: Intel(R) Xeon(R) Platinum P-8136 CPU @ 2.00GHz (112 threads) # mkdir /sys/fs/resctrl/test # echo $$ > /sys/fs/resctrl/test/tasks # perf bench sched messaging -g 40 -l 100000 task-clock time ranges collected using: # perf stat rmdir /sys/fs/resctrl/test Baseline: 1.54 - 1.60 ms smp_mb() every matching task: 1.57 - 1.67 ms [ bp: Massage commit message. ] Fixes: ae28d1aa ("x86/resctrl: Use an IPI instead of task_work_add() to update PQR_ASSOC MSR") Fixes: 0efc89be ("x86/intel_rdt: Update task closid immediately on CPU in rmdir and unmount") Signed-off-by:
Peter Newman <peternewman@google.com> Signed-off-by:
Borislav Petkov (AMD) <bp@alien8.de> Reviewed-by:
Reinette Chatre <reinette.chatre@intel.com> Reviewed-by:
Babu Moger <babu.moger@amd.com> Cc: <stable@kernel.org> Link: https://lore.kernel.org/r/20221220161123.432120-1-peternewman@google.com Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Reinette Chatre authored
[ Upstream commit e0ad6dc8 ] James reported in [1] that there could be two tasks running on the same CPU with task_struct->on_cpu set. Using task_struct->on_cpu as a test if a task is running on a CPU may thus match the old task for a CPU while the scheduler is running and IPI it unnecessarily. task_curr() is the correct helper to use. While doing so move the #ifdef check of the CONFIG_SMP symbol to be a C conditional used to determine if this helper should be used to ensure the code is always checked for correctness by the compiler. [1] https://lore.kernel.org/lkml/a782d2f3-d2f6-795f-f4b1-9462205fd581@arm.com Reported-by:
James Morse <james.morse@arm.com> Signed-off-by:
Reinette Chatre <reinette.chatre@intel.com> Signed-off-by:
Borislav Petkov <bp@suse.de> Link: https://lkml.kernel.org/r/e9e68ce1441a73401e08b641cc3b9a3cf13fe6d4.1608243147.git.reinette.chatre@intel.com Stable-dep-of: fe1f0714 ("x86/resctrl: Fix task CLOSID/RMID update race") Signed-off-by:
Sasha Levin <sashal@kernel.org>
-