- Mar 23, 2021
-
-
Jian Shen authored
Currently, there are too many branches for hclge_fd_convert_tuple(). And it may be more when add new tuples. Refactor it by sorting the tuples according to their length. So it only needs several KEY_OPT now, and being flexible to add new tuples. Signed-off-by:
Jian Shen <shenjian15@huawei.com> Signed-off-by:
Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Jian Shen authored
The process of function hclge_fd_get_tuple() is complex and prolix. To make it more readable, extract the process of each flow-type tuple to a single function. Signed-off-by:
Jian Shen <shenjian15@huawei.com> Signed-off-by:
Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Jian Shen authored
The process of function hclge_add_fd_entry() is complex and prolix. To make it more readable, extract the process of fs->ring_cookie to a single function. Signed-off-by:
Jian Shen <shenjian15@huawei.com> Signed-off-by:
Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Bhaskar Chowdhury authored
s/unrequired/"not required"/ s/consme/consume/ .....two different places s/accros/across/ Signed-off-by:
Bhaskar Chowdhury <unixbhaskar@gmail.com> Acked-by:
Igor Russkikh <irusskikh@marvell.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Bhaskar Chowdhury authored
s/subsytem/subsystem/ Signed-off-by:
Bhaskar Chowdhury <unixbhaskar@gmail.com> Acked-by:
Randy Dunlap <rdunlap@infradead.org> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Bhaskar Chowdhury authored
s/packaet/packet/ Signed-off-by:
Bhaskar Chowdhury <unixbhaskar@gmail.com> Acked-by:
Randy Dunlap <rdunlap@infradead.org> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Cristian Ciocaltea says: ==================== Add support for Actions Semi Owl Ethernet MAC This patch series adds support for the Ethernet MAC found on the Actions Semi Owl family of SoCs. For the moment I have only tested the driver on RoseapplePi SBC, which is based on the S500 SoC variant. It might work on S900 as well, but I cannot tell for sure since the S900 datasheet I currently have doesn't provide any information regarding the MAC registers - so I couldn't check the compatibility with S500. Similar story for S700: the datasheet I own is incomplete, but it seems the MAC is advertised with Gigabit capabilities. For that reason most probably we need to extend the current implementation in order to support this SoC variant as well. Please note that for testing the driver it is also necessary to update the S500 clock subsystem: https://lore.kernel.org/lkml/cover.1615221459.git.cristian.ciocaltea@gmail.com/ The DTS changes for the S500 SBCs will be provided separately. Thanks, Cristi Changes in v3: - Dropped the 'debug' module parameter and passed the default NETIF_MSG flags to netif_msg_init(), according to David's review - Removed the owl_emac_generate_mac_addr() function and the related OWL_EMAC_GEN_ADDR_SYS_SN config option until a portable solution to get the system serial number is found - when building on arm64 the following error is thrown (as reported by Rob's kernel bot): '[...]/owl-emac.c:9:10: fatal error: asm/system_info.h: No such file or directory' - Rebased patchset on v5.12-rc4 Changes in v2: * According to Philipp's review - Requested exclusive control over serial line via devm_reset_control_get_exclusive() - Optimized error handling by using dev_err_probe() * According to Andrew's review - Dropped the inline keywords - Applied Reverse Christmas Tree format to local variable declarations - Renamed owl_emac_phy_config() to owl_emac_update_link_state() - Documented the purpose of the special descriptor used in the context of owl_emac_setup_frame_xmit() - Updated comment inside owl_emac_mdio_clock_enable() regarding the MDC clock divider setup - Indicated MAC support for symmetric pause via phy_set_sym_pause() in owl_emac_phy_init() - Changed the MAC addr generation algorithm in owl_emac_generate_mac_addr() by setting the locally administered bit in byte 0 and replacing bytes 1 & 2 with additional entries from enc_sn - Moved devm_add_action_or_reset() before clk_set_rate() in owl_emac_probe() * Other - Added SMII interface support: updated owl_emac_core_sw_reset(), added owl_emac_clk_set_rate(), updated description in the YAML binding - Changed OWL_EMAC_TX_TIMEOUT from 0.05*HZ to 2*HZ ==================== Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Cristian Ciocaltea authored
Add entries for Actions Semi Owl Ethernet MAC binding and driver. Signed-off-by:
Cristian Ciocaltea <cristian.ciocaltea@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Cristian Ciocaltea authored
Add new driver for the Ethernet MAC used on the Actions Semi Owl family of SoCs. Currently this has been tested only on the Actions Semi S500 SoC variant. Signed-off-by:
Cristian Ciocaltea <cristian.ciocaltea@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Cristian Ciocaltea authored
Add devicetree binding for the Ethernet MAC present on the Actions Semi Owl family of SoCs. For the moment advertise only the support for the Actions Semi S500 SoC variant. Signed-off-by:
Cristian Ciocaltea <cristian.ciocaltea@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Vladimir Oltean authored
The existing code is functionally correct: iproute2 parses the ip_flags argument for tc-flower and really packs it as big endian into the TCA_FLOWER_KEY_FLAGS netlink attribute. But there is a problem in the fact that W=1 builds complain: net/sched/cls_flower.c:1047:15: warning: cast to restricted __be32 This is because we should use the dedicated helper for obtaining a __be32 pointer to the netlink attribute, not a u32 one. This ensures type correctness for be32_to_cpu. Signed-off-by:
Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Vladimir Oltean authored
A make W=1 build complains that: net/sched/cls_flower.c:214:20: warning: cast from restricted __be16 net/sched/cls_flower.c:214:20: warning: incorrect type in argument 1 (different base types) net/sched/cls_flower.c:214:20: expected unsigned short [usertype] val net/sched/cls_flower.c:214:20: got restricted __be16 [usertype] dst This is because we use htons on struct flow_dissector_key_ports members src and dst, which are defined as __be16, so they are already in network byte order, not host. The byte swap function for the other direction should have been used. Because htons and ntohs do the same thing (either both swap, or none does), this change has no functional effect except to silence the warnings. Signed-off-by:
Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Vincent Mailhol authored
Add a function to set the dynamic queue limit minimum value. Some specific drivers might have legitimate reasons to configure dql.min_limit to a given value. Typically, this is the case when the PDU of the protocol is smaller than the packet size to used to carry those frames to the device. Concrete example: a CAN (Control Area Network) device with an USB 2.0 interface. The PDU of classical CAN protocol are roughly 16 bytes but the USB packet size (which is used to carry the CAN frames to the device) might be up to 512 bytes. Wen small traffic burst occurs, BQL algorithm is not able to immediately adjust and this would result in having to send many small USB packets (i.e packet of 16 bytes for each CAN frame). Filling up the USB packet with CAN frames is relatively fast (small latency issue) but the gain of not having to send several small USB packets is huge (big throughput increase). In this case, forcing dql.min_limit to a given value that would allow to stuff the USB packet is always a win. This function is to be used by network drivers which are able to prove through a rationale and through empirical tests on several environment (with other applications, heavy context switching, virtualization...), that they constantly reach better performances with a specific predefined dql.min_limit value with no noticeable latency impact. Signed-off-by:
Vincent Mailhol <mailhol.vincent@wanadoo.fr> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Alexander Lobakin authored
1. Remove CONFIG_HAVE_NET_DSA. CONFIG_HAVE_NET_DSA is a legacy leftover from the times when drivers should have selected CONFIG_NET_DSA manually. Currently, all drivers has explicit 'depends on NET_DSA', so this is no more needed. 2. CONFIG_HAVE_NET_DSA dependencies became CONFIG_NET_DSA's ones. - dropped !S390 dependency which was introduced to be sure NET_DSA can select CONFIG_PHYLIB. DSA migrated to Phylink almost 3 years ago and the PHY library itself doesn't depend on !S390 since commit 870a2b5e ("phylib: remove !S390 dependeny from Kconfig"); - INET dependency is kept to be sure we can select NET_SWITCHDEV; - NETDEVICES dependency is kept to be sure we can select PHYLINK. 3. DSA drivers menu now depends on NET_DSA. Instead on 'depends on NET_DSA' on every single driver, the entire menu now depends on it. This eliminates a lot of duplicated lines from Kconfig with no loss (when CONFIG_NET_DSA=m, drivers also can be only m or n). This also has a nice side effect that there's no more empty menu on configurations without DSA. 4. Kbuild will now descend into 'drivers/net/dsa' only when CONFIG_NET_DSA is y or m. This is safe since no objects inside this folder can be built without DSA core, as well as when CONFIG_NET_DSA=m, no objects can be built-in. Signed-off-by:
Alexander Lobakin <alobakin@pm.me> Reviewed-by:
Vladimir Oltean <olteanv@gmail.com> Reviewed-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
- Mar 21, 2021
-
-
Vladimir Oltean authored
This reverts commit e9bf9694. The topic of the reverted patch is the support for switches with global VLAN filtering, added by commit 061f6a50 ("net: dsa: Add ndo_vlan_rx_{add, kill}_vid implementation"). Be there a switch with 4 ports swp0 -> swp3, and the following setup: ip link add br0 type bridge vlan_filtering 1 ip link set swp0 master br0 ip link set swp1 master br0 What would happen with VLAN-tagged traffic received on standalone ports swp2 and swp3? Well, it would get dropped, were it not for the .ndo_vlan_rx_add_vid and .ndo_vlan_rx_kill_vid implementations (called from vlan_vid_add and vlan_vid_del respectively). Basically, for DSA switches where VLAN filtering is a global attribute, we enforce the standalone ports to have 'rx-vlan-filter: off [fixed]' in their ethtool features, which lets the user know that all VLAN-tagged packets that are not explicitly added in the RX filtering list are dropped. As for the sja1105 driver, at the time of the reverted patch, it was operating in a pretty handicapped mode when it had ports under a bridge with vlan_filtering=1. Specifically, it was unable to terminate traffic through the CPU port (for further explanation see "Traffic support" in Documentation/networking/dsa/sja1105.rst). However, since then, the sja1105 driver has made considerable progress, and that limitation is no longer as severe now. Specifically, since commit 2cafa72e ("net: dsa: sja1105: add a new best_effort_vlan_filtering devlink parameter"), the driver is able to perform CPU termination even when some ports are under bridges with vlan_filtering=1. Then, since commit 8841f6e6 ("net: dsa: sja1105: make devlink property best_effort_vlan_filtering true by default"), this even became the default operating mode. So we can now take advantage of the logic in the DSA core. Signed-off-by:
Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Heiner Kallweit authored
Add support for the ethtool get_ringparam operation. Signed-off-by:
Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Alex Elder says: ==================== net: ipa: more configuration data updates This series starts with two patches that should have been included in an earlier series. With these in place, QSB settings are programmed from information found in the data files rather than being embedded in code. Support is then added for reprenting another QSB property (supported for IPA v4.0+). The third patch updates the definition of the sequencer type used for an endpoint. Previously a set of 2-byte symbols with fairly long names defined the sequencer type, but now those are broken into 1-byte halves whose names are a little more informative. The fourth patch moves the sequencer type definition so it only applies to TX endpoints (they aren't valid for RX endpoints). And the last makes some minor documentation updates. ==================== Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Alex Elder authored
Fix/expand some comments in "ipa_data.h". Signed-off-by:
Alex Elder <elder@linaro.org> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Alex Elder authored
We only program the sequencer type for TX endpoints. So move the definition of the sequencer type fields into the TX-specific portion of the endpoint configuration data. There's no need to maintain this in the IPA structure; we can extract it from the configuration data it points to in the one spot it's needed. We previously specified the sequencer type for RX endpoints with INVALID values. These are no longer needed, so get rid of them. Signed-off-by:
Alex Elder <elder@linaro.org> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Alex Elder authored
An IPA endpoint has a sequencer that must be configured based on how the endpoint is to be used. Currently the IPA code programs the sequencer type by splitting a value into four 4-bit nibbles. Doing that doesn't really add much value, and regardless, a better way of splitting the sequencer type is into two halves--the lower byte describing how normal packet processing is handled, and the next byte describing information about processing replicas. So split the sequencer type into two sub-parts: the sequencer type and the replication sequencer type. Define the values supported for the "main" sequencer type, and define the values supported for the replication part separately. In addition, the sequencer type names are quite verbose, encoding what the type includes, but also what it *excludes*. Rename the sequencer types in a way that mainly describes the number of passes that a packet takes through the IPA processing pipeline, and how many of those passes end by supplying the processed packet to the microprocessor. The result expands the supported types beyond what is required for now, but simplifies the way these are defined. Signed-off-by:
Alex Elder <elder@linaro.org> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Alex Elder authored
Starting with IPA v4.0, a limit is placed on the number of bytes outstanding in a transaction, to reduce latency. The limit is imposed only if this value is non-zero. We don't use a non-zero value for SC7180, but newer versions of IPA do. Prepare for that by allowing a programmed value to be specified in the platform configuration data. Signed-off-by:
Alex Elder <elder@linaro.org> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Alex Elder authored
Use the QSB configuration data in ipa_hardware_config_qsb(), rather than determining in code what values to use based on IPA version. Pass configuration data to ipa_hardware_config() so it can be passed to ipa_hardware_config_qsb(). Signed-off-by:
Alex Elder <elder@linaro.org> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Sai Kalyaan Palla authored
Made changes to coding style as suggested by checkpatch.pl changes are of the type: open brace '{' following struct go on the same line do not use assignment in if condition Signed-off-by:
Sai Kalyaan Palla <saikalyaan63@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
- Mar 20, 2021
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queueDavid S. Miller authored
Tony Nguyen says: ==================== 1GbE Intel Wired LAN Driver Updates 2021-03-19 This series contains updates to igc and e1000e drivers. Sasha removes unused defines in igc driver. Jiapeng Zhong changes bool assignments from 0/1 to false/true for igc. Wei Yongjun marks e1000e_pm_prepare() as __maybe_unused to resolve a defined but not used warning under certain configurations. ==================== Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Wei Yongjun authored
The function e1000e_pm_prepare() may have no callers depending on configuration, so it must be marked __maybe_unused to avoid harmless warning: drivers/net/ethernet/intel/e1000e/netdev.c:6926:12: warning: 'e1000e_pm_prepare' defined but not used [-Wunused-function] 6926 | static int e1000e_pm_prepare(struct device *dev) | ^~~~~~~~~~~~~~~~~ Fixes: ccf8b940 ("e1000e: Leverage direct_complete to speed up s2ram") Reported-by:
Hulk Robot <hulkci@huawei.com> Signed-off-by:
Wei Yongjun <weiyongjun1@huawei.com> Signed-off-by:
Tony Nguyen <anthony.l.nguyen@intel.com>
-
Jiapeng Zhong authored
Fix the following coccicheck warnings: ./drivers/net/ethernet/intel/igc/igc_main.c:4961:2-14: WARNING: Assignment of 0/1 to bool variable. ./drivers/net/ethernet/intel/igc/igc_main.c:4955:2-14: WARNING: Assignment of 0/1 to bool variable. ./drivers/net/ethernet/intel/igc/igc_main.c:4933:1-13: WARNING: Assignment of 0/1 to bool variable. ./drivers/net/ethernet/intel/igc/igc_main.c:4592:1-24: WARNING: Assignment of 0/1 to bool variable. ./drivers/net/ethernet/intel/igc/igc_main.c:4438:2-25: WARNING: Assignment of 0/1 to bool variable. ./drivers/net/ethernet/intel/igc/igc_main.c:4396:2-25: WARNING: Assignment of 0/1 to bool variable. ./drivers/net/ethernet/intel/igc/igc_main.c:4018:2-25: WARNING: Assignment of 0/1 to bool variable. Reported-by:
Abaci Robot <abaci@linux.alibaba.com> Signed-off-by:
Jiapeng Zhong <abaci-bugfix@linux.alibaba.com> Tested-by:
Dvora Fuxbrumer <dvorax.fuxbrumer@linux.intel.com> Signed-off-by:
Tony Nguyen <anthony.l.nguyen@intel.com>
-
Sasha Neftin authored
MII_CR_LOOPBACK masks not in use in i225 device and can be removed. Signed-off-by:
Sasha Neftin <sasha.neftin@intel.com> Tested-by:
Dvora Fuxbrumer <dvorax.fuxbrumer@linux.intel.com> Signed-off-by:
Tony Nguyen <anthony.l.nguyen@intel.com>
-
Sasha Neftin authored
Force PHY speed not supported for i225 devices. MII_CR_SPEED masks not in use in i225 device and can be removed. Signed-off-by:
Sasha Neftin <sasha.neftin@intel.com> Tested-by:
Dvora Fuxbrumer <dvorax.fuxbrumer@linux.intel.com> Signed-off-by:
Tony Nguyen <anthony.l.nguyen@intel.com>
-
Eric Dumazet authored
I was working on a syzbot issue, claiming one device could not be dismantled because its refcount was -1 unregister_netdevice: waiting for sit0 to become free. Usage count = -1 It would be nice if syzbot could trigger a warning at the time this reference count became negative. This patch adds CONFIG_PCPU_DEV_REFCNT options which defaults to per cpu variables (as before this patch) on SMP builds. v2: free_dev label in alloc_netdev_mqs() is moved to avoid a compiler warning (-Wunused-label), as reported by kernel test robot <lkp@intel.com> Signed-off-by:
Eric Dumazet <edumazet@google.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Alex Elder says: ==================== net: ipa: update configuration data Each IPA version has a "data" file defining how various things are configured. This series gathers a few updates to this information: - The first patch makes all configuration data constant - The second fixes an incorrect (but seemingly harmless) value - The third simplifies things a bit by using implicit zero initialization for memory regions that are empty - The fourth adds definitions for memory regions that exist but are not yet used - The fifth use configuration data rather than conditional code to set some bus parameters ====================
-
Alex Elder authored
Define the maximum number of reads and writes to configure for the QSB masters used for IPA in configuration data. We don't use these values yet; the next commit takes care of that. Signed-off-by:
Alex Elder <elder@linaro.org> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Alex Elder authored
There are several memory regions that are defined starting with IPA v4.0, but which were not used for the SC7180 SoC (IPA v4.2). Even though they're not used (yet), define them so they are ready to be used for SoCs when they become supported. There are two QUOTA statistics memory regions, one for the modem and one for the AP. Define distinct names for these regions, and get rid of the definition of IPA_MEM_STATS_QUOTA. Signed-off-by:
Alex Elder <elder@linaro.org> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Alex Elder authored
The AP_HEADER memory region for both the SDM845 and SC7180 SoCs has zero size, and has no canaries. Defining an offset for such a zero-length region is not meaningful, so it's better not to define it at all. The size of this region is used in the code, but its value will still be zero because the memory regions are defined in statically initialized memory. For the SC7180, the STATS_DROP memory region has a zero size and no canaries as well. These regions are the only place where a zero-sized region is defined despite having no canaries. Remove them. Signed-off-by:
Alex Elder <elder@linaro.org> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Alex Elder authored
There should be no canary values written before the beginning of the UC_INFO memory region. This was correct for SDM845, but somehow was committed with the wrong value for SC7180. This bug seems to cause no harm, so we'll just correct it without back-porting. Signed-off-by:
Alex Elder <elder@linaro.org> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Alex Elder authored
All of the platform configuration data should be constant, but that isn't the case for the memory regions, interconnects, and clocks. Fix this. Signed-off-by:
Alex Elder <elder@linaro.org> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Sasha Neftin authored
MII_CR_RESET mask not in use in i225 device and can be removed Signed-off-by:
Sasha Neftin <sasha.neftin@intel.com> Tested-by:
Dvora Fuxbrumer <dvorax.fuxbrumer@linux.intel.com> Signed-off-by:
Tony Nguyen <anthony.l.nguyen@intel.com>
-
David S. Miller authored
Bjarni Jonasson says: ==================== Fixes applied to VCS8584 family Three different fixes applied to VSC8584 family: 1. LCPLL reset 2. Serdes calibration 3. Coma mode disabled The same fixes has already been applied to VSC8514 and most of the functionality can be reused for the VSC8584. v1 -> v2: Preserved reversed christmas tree ==================== Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Bjarni Jonasson authored
This patch releases coma mode for VSC8584 as done for VSC8514 in commit ca0d7fd0 ("net: phy: mscc: coma mode disabled for VSC8514") Fixes: a5afc167 ("net: phy: mscc: add support for VSC8584 PHY.") Signed-off-by:
Bjarni Jonasson <bjarni.jonasson@microchip.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Bjarni Jonasson authored
Introduced 'FOJI' serdes calibration in commit 85e97f0b ("net: phy: mscc: improved serdes calibration applied to VSC8514") Now including the VSC8584 family. Fixes: a5afc167 ("net: phy: mscc: add support for VSC8584 PHY.") Signed-off-by:
Bjarni Jonasson <bjarni.jonasson@microchip.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Bjarni Jonasson authored
Introduced LCPLL reset in commit d15e08d9fb82 ("net: phy: mscc: adding LCPLL reset to VSC8514"). Now applying this reset to the VSC8584 phy familiy. Fixes: a5afc167 ("net: phy: mscc: add support for VSC8584 PHY.") Signed-off-by:
Bjarni Jonasson <bjarni.jonasson@microchip.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-