- Dec 02, 2015
-
-
Alexey Khoroshilov authored
qset_fill_page_list() do not check for dma mapping errors. Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by:
Alexey Khoroshilov <khoroshilov@ispras.ru> Cc: stable <stable@vger.kernel.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Hans Yang authored
When a USB 3.0 mass storage device is disconnected in transporting state, storage device driver may handle it as a transport error and reset the device by invoking usb_reset_and_verify_device() and following could happen: in usb_reset_and_verify_device(): udev->bos = NULL; For U1/U2 enabled devices, driver will disable LPM, and in some conditions: from usb_unlocked_disable_lpm() --> usb_disable_lpm() --> usb_enable_lpm() udev->bos->ss_cap->bU1devExitLat; And it causes 'NULL pointer' and 'kernel panic': [ 157.976257] Unable to handle kernel NULL pointer dereference at virtual address 00000010 ... [ 158.026400] PC is at usb_enable_link_state+0x34/0x2e0 [ 158.031442] LR is at usb_enable_lpm+0x98/0xac ... [ 158.137368] [<ffffffc0006a1cac>] usb_enable_link_state+0x34/0x2e0 [ 158.143451] [<ffffffc0006a1fec>] usb_enable_lpm+0x94/0xac [ 158.148840] [<ffffffc0006a20e8>] usb_disable_lpm+0xa8/0xb4 ... [ 158.214954] Kernel panic - not syncing: Fatal exception This commit moves 'udev->bos = NULL' behind usb_unlocked_disable_lpm() to prevent from NULL pointer access. Issue can be reproduced by following setup: 1) A SS pen drive behind a SS hub connected to the host. 2) Transporting data between the pen drive and the host. 3) Abruptly disconnect hub and pen drive from host. 4) With a chance it crashes. Signed-off-by:
Hans Yang <hansy@nvidia.com> Acked-by:
Alan Stern <stern@rowland.harvard.edu> Cc: stable <stable@vger.kernel.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Adrien Vergé authored
All ELAN hid devices seem to require the ALWAYS_POLL quirk. Let's use this quirk for all devices from this vendor, rather than maintaining a list of all its known product IDs. Tested-by:
Adrien Vergé <adrienverge@gmail.com> Signed-off-by:
Adrien Vergé <adrienverge@gmail.com> Reviewed-by:
Benjamin Tissoires <benjamin.tissoires@redhat.com> Reviewed-by:
Jiri Kosina <jkosina@suse.cz> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Dmitry Katsubo authored
The patch extends the family of SATA-to-USB JMicron adapters that need FUA to be disabled and applies the same policy for uas driver. See details in http://unix.stackexchange.com/questions/237204/ Signed-off-by:
Dmitry Katsubo <dmitry.katsubo@gmail.com> Tested-by:
Dmitry Katsubo <dmitry.katsubo@gmail.com> Acked-by:
Alan Stern <stern@rowland.harvard.edu> Cc: stable <stable@vger.kernel.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Adrien Vergé authored
Like other buggy models that had their fixes [1], the touchscreen with id 04f3:21b8 from ELAN Microelectronics needs the device-qualifier quirk. Otherwise, it fails to respond, blocks the boot for a random amount of time and pollutes dmesg with: [ 2887.373196] usb 1-5: new full-speed USB device number 41 using xhci_hcd [ 2889.502000] usb 1-5: unable to read config index 0 descriptor/start: -71 [ 2889.502005] usb 1-5: can't read configurations, error -71 [ 2889.654571] usb 1-5: new full-speed USB device number 42 using xhci_hcd [ 2891.783438] usb 1-5: unable to read config index 0 descriptor/start: -71 [ 2891.783443] usb 1-5: can't read configurations, error -71 [1]: See commits c68929f7, 876af5d4, d7499475, a32c99e7 and dc703ec2 . Tested-by:
Adrien Vergé <adrienverge@gmail.com> Signed-off-by:
Adrien Vergé <adrienverge@gmail.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Greg Kroah-Hartman authored
Merge tag 'usb-serial-4.4-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial into usb-linus Johan writes: USB-serial fixes for v4.4-rc3 Here are some device-id fixes that remove a HID device from cp210x, and adds support for another Infineon flash-loader device. The flash-loader device presents itself as a CDC-ACM device even though it is clearly not, so we need to blacklist it in the cdc-acm driver as well. Signed-off-by:
Johan Hovold <johan@kernel.org>
-
Greg Kroah-Hartman authored
Merge tag 'fixes-for-v4.4-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb into usb-linus Felipe writes: usb: fixes for v4.4-rc3 Here's our second round of fixes. Some of the bugs are pretty old like the one on pxa27x suspend implementation. The most important part is a randbuild warning fix on MUSB CPPI DMA engine by Arnd, a couple fixes by Felipe Tonello on f_midi (first one makes sure we only transmit on enabled ep IN while second plugs a memory leak) and a NULL pointer dereference fix on renesas usbhs. Note that we also have a new compatible string being added for the MXS PHY.
-
- Nov 30, 2015
-
-
Linus Torvalds authored
-
git://people.freedesktop.org/~airlied/linuxLinus Torvalds authored
Pull nouveau and radeon fixes from Dave Airlie: "Just some nouveau and radeon/amdgpu fixes. The nouveau fixes look large as the firmware context files are regenerated, but the actual change is quite small" * 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: drm/radeon: make some dpm errors debug only drm/nouveau/volt/pwm/gk104: fix an off-by-one resulting in the voltage not being set drm/nouveau/nvif: allow userspace access to its own client object drm/nouveau/gr/gf100-: fix oops when calling zbc methods drm/nouveau/gr/gf117-: assume no PPC if NV_PGRAPH_GPC_GPM_PD_PES_TPC_ID_MASK is zero drm/nouveau/gr/gf117-: read NV_PGRAPH_GPC_GPM_PD_PES_TPC_ID_MASK from correct GPC drm/nouveau/gr/gf100-: split out per-gpc address calculation macro drm/nouveau/bios: return actual size of the buffer retrieved via _ROM drm/nouveau/instmem: protect instobj list with a spinlock drm/nouveau/pci: enable c800 magic for some unknown Samsung laptop drm/nouveau/pci: enable c800 magic for Clevo P157SM drm/radeon: make rv770_set_sw_state failures non-fatal drm/amdgpu: move dependency handling out of atomic section v2 drm/amdgpu: optimize scheduler fence handling drm/amdgpu: remove vm->mutex drm/amdgpu: add mutex for ba_va->valids/invalids drm/amdgpu: adapt vce session create interface changes drm/amdgpu: vce use multiple cache surface starting from stoney drm/amdgpu: reset vce trap interrupt flag
-
git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linuxLinus Torvalds authored
Pull RTC fixes from Alexandre Belloni: "Two fixes for the ds1307 alarm and wakeup" * tag 'rtc-4.4-2' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: rtc: ds1307: fix alarm reading at probe time rtc: ds1307: fix kernel splat due to wakeup irq handling
-
git://git.linux-mips.org/pub/scm/ralf/upstream-linusLinus Torvalds authored
Pull MIPS fix from Ralf Baechle: "Just a fix for empty loops that may be removed by non-antique GCC" * 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: MIPS: Fix delay loops which may be removed by GCC.
-
git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68kLinus Torvalds authored
Pull m68k fixes from Geert Uytterhoeven: "Summary: - Add missing initialization of max_pfn, which is needed to make selftests/vm/mlock2-tests succeed, - Wire up new mlock2 syscall" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k: m68k: Wire up mlock2 m68knommu: Add missing initialization of max_pfn and {min,max}_low_pfn m68k/mm: sun3 - Add missing initialization of max_pfn and {min,max}_low_pfn m68k/mm: m54xx - Add missing initialization of max_pfn m68k/mm: motorola - Add missing initialization of max_pfn
-
git://ftp.arm.linux.org.uk/~rmk/linux-armLinus Torvalds authored
Pull ARM fixes from Russell King: "Just two changes this time around: - wire up the new mlock2 syscall added during the last merge window - fix a build problem with certain configurations provoked by making CONFIG_OF user selectable" * 'fixes' of git://ftp.arm.linux.org.uk/~rmk/linux-arm: ARM: 8454/1: OF implies OF_FLATTREE ARM: wire up mlock2 syscall
-
git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pendingLinus Torvalds authored
Pull SCSI target fixes from Nicholas Bellinger: - fix tcm-user backend driver expired cmd time processing (agrover) - eliminate kref_put_spinlock_irqsave() for I/O completion (bart) - fix iscsi login kthread failure case hung task regression (nab) - fix COMPARE_AND_WRITE completion use-after-free race (nab) - fix COMPARE_AND_WRITE with SCF_PASSTHROUGH_SG_TO_MEM_NOALLOC non zero SGL offset data corruption. (Jan + Doug) - fix >= v4.4-rc1 regression for tcm_qla2xxx enable configfs attribute (Himanshu + HCH) * git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending: target/stat: print full t10_wwn.model buffer target: fix COMPARE_AND_WRITE non zero SGL offset data corruption qla2xxx: Fix regression introduced by target configFS changes kref: Remove kref_put_spinlock_irqsave() target: Invoke release_cmd() callback without holding a spinlock target: Fix race for SCF_COMPARE_AND_WRITE_POST checking iscsi-target: Fix rx_login_comp hang after login failure iscsi-target: return -ENOMEM instead of -1 in case of failed kmalloc() target/user: Do not set unused fields in tcmu_ops target/user: Fix time calc in expired cmd processing
-
git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linuxLinus Torvalds authored
Pull thermal management fixes from Zhang Rui: "Specifics: - several fixes and cleanups on Rockchip thermal drivers. - add the missing support of RK3368 SoCs in Rockchip driver. - small fixes on of-thermal, power_allocator, rcar driver, IMX, and QCOM drivers, and also compilation fixes, on thermal.h, when thermal is not selected" * 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux: imx: thermal: use CPU temperature grade info for thresholds thermal: fix thermal_zone_bind_cooling_device prototype Revert "thermal: qcom_spmi: allow compile test" thermal: rcar_thermal: remove redundant operation thermal: of-thermal: Reduce log level for message when can't fine thermal zone thermal: power_allocator: Use temperature reading from tz thermal: rockchip: Support the RK3368 SoCs in thermal driver thermal: rockchip: consistently use int for temperatures thermal: rockchip: Add the sort mode for adc value increment or decrement thermal: rockchip: improve the conversion function thermal: rockchip: trivial: fix typo in commit thermal: rockchip: better to compatible the driver for different SoCs dt-bindings: rockchip-thermal: Support the RK3368 SoCs compatible
-
- Nov 29, 2015
-
-
David Disseldorp authored
Cut 'n paste error saw it only process sizeof(t10_wwn.vendor) characters. Signed-off-by:
David Disseldorp <ddiss@suse.de> Signed-off-by:
Nicholas Bellinger <nab@linux-iscsi.org>
-
Jan Engelhardt authored
target_core_sbc's compare_and_write functionality suffers from taking data at the wrong memory location when writing a CAW request to disk when a SGL offset is non-zero. This can happen with loopback and vhost-scsi fabric drivers when SCF_PASSTHROUGH_SG_TO_MEM_NOALLOC is used to map existing user-space SGL memory into COMPARE_AND_WRITE READ/WRITE payload buffers. Given the following sample LIO subtopology, % targetcli ls /loopback/ o- loopback ................................. [1 Target] o- naa.6001405ebb8df14a ....... [naa.60014059143ed2b3] o- luns ................................... [2 LUNs] o- lun0 ................ [iblock/ram0 (/dev/ram0)] o- lun1 ................ [iblock/ram1 (/dev/ram1)] % lsscsi -g [3:0:1:0] disk LIO-ORG IBLOCK 4.0 /dev/sdc /dev/sg3 [3:0:1:1] disk LIO-ORG IBLOCK 4.0 /dev/sdd /dev/sg4 the following bug can be observed in Linux 4.3 and 4.4~rc1: % perl -e 'print chr$_ for 0..255,reverse 0..255' >rand % perl -e 'print "\0" x 512' >zero % cat rand >/dev/sdd % sg_compare_and_write -i rand -D zero --lba 0 /dev/sdd % sg_compare_and_write -i zero -D rand --lba 0 /dev/sdd Miscompare reported % hexdump -Cn 512 /dev/sdd 00000000 0f 0e 0d 0c 0b 0a 09 08 07 06 05 04 03 02 01 00 00000010 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 * 00000200 Rather than writing all-zeroes as instructed with the -D file, it corrupts the data in the sector by splicing some of the original bytes in. The page of the first entry of cmd->t_data_sg includes the CDB, and sg->offset is set to a position past the CDB. I presume that sg->offset is also the right choice to use for subsequent sglist members. Signed-off-by:
Jan Engelhardt <jengelh@netitwork.de> Tested-by:
Douglas Gilbert <dgilbert@interlog.com> Cc: <stable@vger.kernel.org> # v3.12+ Signed-off-by:
Nicholas Bellinger <nab@linux-iscsi.org>
-
Himanshu Madhani authored
this patch fixes following regression # targetcli [Errno 13] Permission denied: '/sys/kernel/config/target/qla2xxx/21:00:00:0e:1e:08:c7:20/tpgt_1/enable' Fixes: 2eafd729 ("target: use per-attribute show and store methods") Signed-off-by:
Himanshu Madhani <himanshu.madhani@qlogic.com> Signed-off-by:
Giridhar Malavali <giridhar.malavali@qlogic.com> Reviewed-by:
Christoph Hellwig <hch@lst.de> Signed-off-by:
Nicholas Bellinger <nab@linux-iscsi.org>
-
Bart Van Assche authored
The last user is gone. Hence remove this function. Signed-off-by:
Bart Van Assche <bart.vanassche@sandisk.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Christoph Hellwig <hch@lst.de> Cc: Joern Engel <joern@logfs.org> Signed-off-by:
Nicholas Bellinger <nab@linux-iscsi.org>
-
Bart Van Assche authored
This patch fixes the following kernel warning because it avoids that IRQs are disabled while ft_release_cmd() is invoked (fc_seq_set_resp() invokes spin_unlock_bh()): WARNING: CPU: 3 PID: 117 at kernel/softirq.c:150 __local_bh_enable_ip+0xaa/0x110() Call Trace: [<ffffffff814f71eb>] dump_stack+0x4f/0x7b [<ffffffff8105e56a>] warn_slowpath_common+0x8a/0xc0 [<ffffffff8105e65a>] warn_slowpath_null+0x1a/0x20 [<ffffffff81062b2a>] __local_bh_enable_ip+0xaa/0x110 [<ffffffff814ff229>] _raw_spin_unlock_bh+0x39/0x40 [<ffffffffa03a7f94>] fc_seq_set_resp+0xe4/0x100 [libfc] [<ffffffffa02e604a>] ft_free_cmd+0x4a/0x90 [tcm_fc] [<ffffffffa02e6972>] ft_release_cmd+0x12/0x20 [tcm_fc] [<ffffffffa042bd66>] target_release_cmd_kref+0x56/0x90 [target_core_mod] [<ffffffffa042caf0>] target_put_sess_cmd+0xc0/0x110 [target_core_mod] [<ffffffffa042cb81>] transport_release_cmd+0x41/0x70 [target_core_mod] [<ffffffffa042d975>] transport_generic_free_cmd+0x35/0x420 [target_core_mod] Signed-off-by:
Bart Van Assche <bart.vanassche@sandisk.com> Acked-by:
Joern Engel <joern@logfs.org> Reviewed-by:
Andy Grover <agrover@redhat.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Hannes Reinecke <hare@suse.de> Cc: Sagi Grimberg <sagig@mellanox.com> Signed-off-by:
Nicholas Bellinger <nab@linux-iscsi.org>
-
Nicholas Bellinger authored
This patch addresses a race + use after free where the first stage of COMPARE_AND_WRITE in compare_and_write_callback() is rescheduled after the backend sends the secondary WRITE, resulting in second stage compare_and_write_post() callback completing in target_complete_ok_work() before the first can return. Because current code depends on checking se_cmd->se_cmd_flags after return from se_cmd->transport_complete_callback(), this results in first stage having SCF_COMPARE_AND_WRITE_POST set, which incorrectly falls through into second stage CAW processing code, eventually triggering a NULL pointer dereference due to use after free. To address this bug, pass in a new *post_ret parameter into se_cmd->transport_complete_callback(), and depend upon this value instead of ->se_cmd_flags to determine when to return or fall through into ->queue_status() code for CAW. Cc: Sagi Grimberg <sagig@mellanox.com> Cc: <stable@vger.kernel.org> # v3.12+ Signed-off-by:
Nicholas Bellinger <nab@linux-iscsi.org>
-
Nicholas Bellinger authored
This patch addresses a case where iscsi_target_do_tx_login_io() fails sending the last login response PDU, after the RX/TX threads have already been started. The case centers around iscsi_target_rx_thread() not invoking allow_signal(SIGINT) before the send_sig(SIGINT, ...) occurs from the failure path, resulting in RX thread hanging indefinately on iscsi_conn->rx_login_comp. Note this bug is a regression introduced by: commit e5419865 Author: Nicholas Bellinger <nab@linux-iscsi.org> Date: Wed Jul 22 23:14:19 2015 -0700 iscsi-target: Fix iscsit_start_kthreads failure OOPs To address this bug, complete ->rx_login_complete for good measure in the failure path, and immediately return from RX thread context if connection state did not actually reach full feature phase (TARG_CONN_STATE_LOGGED_IN). Cc: Sagi Grimberg <sagig@mellanox.com> Cc: <stable@vger.kernel.org> # v3.10+ Signed-off-by:
Nicholas Bellinger <nab@linux-iscsi.org>
-
Luis de Bethencourt authored
Smatch complains about returning hard coded error codes, silence this warning. drivers/target/iscsi/iscsi_target_parameters.c:211 iscsi_create_default_params() warn: returning -1 instead of -ENOMEM is sloppy Signed-off-by:
Luis de Bethencourt <luisbg@osg.samsung.com> Reviewed-by:
Sagi Grimberg <sagig@mellanox.com> Signed-off-by:
Nicholas Bellinger <nab@linux-iscsi.org>
-
Andy Grover authored
TCMU sets TRANSPORT_FLAG_PASSTHROUGH, so INQUIRY commands will not be emulated by LIO but passed up to userspace. Therefore TCMU should not set these, just like pscsi doesn't. Signed-off-by:
Andy Grover <agrover@redhat.com> Signed-off-by:
Nicholas Bellinger <nab@linux-iscsi.org>
-
Andy Grover authored
Reversed arguments meant that we were doing nothing for cmds whose deadline had passed. Signed-off-by:
Andy Grover <agrover@redhat.com> Signed-off-by:
Nicholas Bellinger <nab@linux-iscsi.org>
-
Arnd Bergmann authored
On the ARM architecture, individual platforms select CONFIG_USE_OF if they need it, but all device tree code is keyed off CONFIG_OF. When building a platform without DT support and manually enabling CONFIG_OF, we now get a number of build errors, e.g. arch/arm/kernel/devtree.c: In function 'setup_machine_fdt': arch/arm/kernel/devtree.c:215:19: error: implicit declaration of function 'early_init_dt_verify' [-Werror=implicit-function-declaration] We could now try to separate the use case of booting from DT vs. the case of using the dynamic implementation, but that seems more complicated than it can gain us. This simply changes the ARM Kconfig file to always enable OF_RESERVED_MEM and OF_EARLY_FLATTREE when CONFIG_OF is enabled. These options add a little extra code when we just want the dynamic OF implementation, but that seems like a rather obscure case, and this version solves all CONFIG_OF related randconfig regressions. Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Fixes: 0166dc11 ("of: make CONFIG_OF user selectable") Acked-by:
Rob Herring <robh@kernel.org> Signed-off-by:
Russell King <rmk+kernel@arm.linux.org.uk>
-
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pciLinus Torvalds authored
Pull PCI fixes from Bjorn Helgaas: "Here are a few fixes I'd like to have in v4.4: a generic one for sysfs and three for HiSilicon and DesignWare host controllers. Summary: NUMA: - Prevent out of bounds access in numa_node override (Mathias Krause) HiSilicon host bridge driver: - Fix deferred probing (Arnd Bergmann) Synopsys DesignWare host bridge driver: - Remove incorrect io_base assignment (Stanimir Varbanov) - Move align_resource function pointer to pci_host_bridge structure (Gabriele Paoloni)" * tag 'pci-v4.4-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: ARM/PCI: Move align_resource function pointer to pci_host_bridge structure PCI: hisi: Fix deferred probing PCI: designware: Remove incorrect io_base assignment PCI: Prevent out of bounds access in numa_node override
-
- Nov 28, 2015
-
-
git://git.linux-nfs.org/projects/trondmy/linux-nfsLinus Torvalds authored
Pull NFS client bugfixes from Trond Myklebust: "Highlights include: Stable patches: - Fix a NFSv4 callback identifier leak that was also causing client crashes - Fix NFSv4 callback decoding issues when incoming requests are truncated - Don't declare the attribute cache valid when we call nfs_update_inode with an empty attribute structure. - Resend LAYOUTGET when there is a race that changes the seqid Bugfixes: - Fix a number of issues with the NFSv4.2 CLONE ioctl() - Properly set NFS v4.2 NFSDBG_FACILITY - NFSv4 referrals are broken; Cleanup FATTR4_WORD0_FS_LOCATIONS after decoding success - Use sliding delay when LAYOUTGET gets NFS4ERR_DELAY - Ensure that attrcache is revalidated after a SETATTR" * tag 'nfs-for-4.4-2' of git://git.linux-nfs.org/projects/trondmy/linux-nfs: nfs4: resend LAYOUTGET when there is a race that changes the seqid nfs: if we have no valid attrs, then don't declare the attribute cache valid nfs: ensure that attrcache is revalidated after a SETATTR nfs4: limit callback decoding to received bytes nfs4: start callback_ident at idr 1 nfs: use sliding delay when LAYOUTGET gets NFS4ERR_DELAY NFS4: Cleanup FATTR4_WORD0_FS_LOCATIONS after decoding success NFS: Properly set NFS v4.2 NFSDBG_FACILITY nfs: reduce the amount of ifdefs for v4.2 in nfs4file.c nfs: use btrfs ioctl defintions for clone nfs: allow intra-file CLONE nfs: offer native ioctls even if CONFIG_COMPAT is set nfs: pass on count for CLONE operations
-
git://www.linux-watchdog.org/linux-watchdogLinus Torvalds authored
Pull watchdog fixes from Wim Van Sebroeck: - a null pointer dereference fix for omap_wdt - some clock related fixes for pnx4008 - an underflow fix in wdt_set_timeout() for w83977f_wdt - restart fix for tegra wdt - Kconfig change to support Freescale Layerscape platforms - fix for stopping the mtk_wdt watchdog * git://www.linux-watchdog.org/linux-watchdog: watchdog: mtk_wdt: Use MODE_KEY when stopping the watchdog watchdog: Add support for Freescale Layerscape platforms watchdog: tegra: Stop watchdog first if restarting watchdog: w83977f_wdt: underflow in wdt_set_timeout() watchdog: pnx4008: make global wdt_clk static watchdog: pnx4008: fix warnings caused by enabling unprepared clock watchdog: omap_wdt: fix null pointer dereference
-
git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfsLinus Torvalds authored
Pull btrfs fixes from Chris Mason: "This has Mark Fasheh's patches to fix quota accounting during subvol deletion, which we've been working on for a while now. The patch is pretty small but it's a key fix. Otherwise it's a random assortment" * 'for-linus-4.4' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs: btrfs: fix balance range usage filters in 4.4-rc btrfs: qgroup: account shared subtree during snapshot delete Btrfs: use btrfs_get_fs_root in resolve_indirect_ref btrfs: qgroup: fix quota disable during rescan Btrfs: fix race between cleaner kthread and space cache writeout Btrfs: fix scrub preventing unused block groups from being deleted Btrfs: fix race between scrub and block group deletion btrfs: fix rcu warning during device replace btrfs: Continue replace when set_block_ro failed btrfs: fix clashing number of the enhanced balance usage filter Btrfs: fix the number of transaction units needed to remove a block group Btrfs: use global reserve when deleting unused block group after ENOSPC Btrfs: tests: checking for NULL instead of IS_ERR() btrfs: fix signed overflows in btrfs_sync_file
-
git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-securityLinus Torvalds authored
Pull security layer fixes from James Morris: "A fix for SELinux policy processing (regression introduced by commit fa1aa143: "selinux: extended permissions for ioctls"), as well as a fix for the user-triggerable oops in the Keys code" * 'for-linus2' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security: KEYS: Fix handling of stored error in a negatively instantiated user key selinux: fix bug in conditional rules handling
-
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds authored
Pull ARM SoC fixes from Arnd Bergmann: "There is a small backlog of at91 patches here, the most significant is the addition of some sama5d2 Xplained nodes that were waiting on an MFD include file to get merged through another tree. We normally try to sort those out before the merge window opens, but the maintainer wasn't aware of that here and I decided to merge the changes this time as an exception. On OMAP a series of audio changes for dra7 missed the merge window but turned out to be necessary to fix a boot time imprecise external abort error and to get audio working. The other changes are the usual simple changes, here is a list sorted by platform: at91: removal of a useless defconfig option removal of some legacy DT pieces use of the proper watchdog compatible string update of the MAINTAINERS entries for some Atmel drivers drivers/scpi: hide get_scpi_ops in module from built-in code imx: add missing .irq_set_type for i.MX GPC irq_chip. fix the wrong spi-num-chipselects settings for Vybrid DSPI devices. fix a merge error in Vybrid dts regarding to ADC device property keystone: fix the optional PDSP firmware loading fix linking RAM setup for QMs fix crash with clk_ignore_unused mediatek: Enable SCPSYS power domain driver by default mvebu: fix QNAP TS219 power-off in dts fix legacy get_irqnr_and_base for dove and orion5x omap: fix l4 related boot time errors for dm81xx use lockless cldm/pwrdm api in omap4_boot_secondary remove t410 abort handler to avoid hiding other critical errors mark cpuidle tracepoints as _rcuidle fix module alias for omap-ocp2scp pxa: palm: Fix typos in PWM lookup table code renesas: missing __initconst annotation for r8a7793_boards_compat_dt rockchip: disable mmc-tuning on the veyron-minnie board adding the init state for the over-temperature-protection zx: only build power domain code when CONFIG_PM=y" * tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (31 commits) ARM: OMAP4+: SMP: use lockless clkdm/pwrdm api in omap4_boot_secondary arm: omap2+: add missing HWMOD_NO_IDLEST in 81xx hwmod data ARM: orion5x: Fix legacy get_irqnr_and_base ARM: dove: Fix legacy get_irqnr_and_base soc: Mediatek: Enable SCPSYS power domain driver by default ARM: dts: vfxxx: Fix dspi[01] spi-num-chipselects. ARM: dts: keystone: k2l: fix kernel crash when clk_ignore_unused is not in bootargs soc: ti: knav_qmss_queue: Fix linking RAM setup for queue managers soc: ti: use request_firmware_direct() as acc firmware is optional ARM: imx: add platform irq type setting in gpc ARM: dts: vfxxx: Fix erroneous property in esdhc0 node ARM: shmobile: r8a7793: proper constness with __initconst scpi: hide get_scpi_ops in module from built-in code ARM: zx: only build power domain code when CONFIG_PM=y ARM: pxa: palm: Fix typos in PWM lookup table code ARM: dts: Kirkwood: Fix QNAP TS219 power-off ARM: dts: rockchip: Add OTP gpio pinctrl to rk3288 tsadc node ARM: dts: rockchip: temporarily remove emmc hs200 speed from rk3288 minnie MAINTAINERS: Atmel drivers: change NAND and ISI entries ARM: at91/dt: sama5d2 Xplained: add several devices ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pmLinus Torvalds authored
Pull more power management and ACPI fixes from Rafael Wysocki: "These fix one recent regression (cpufreq core), fix up two features added recently (ACPI CPPC support, SCPI support in the arm_big_little cpufreq driver) and fix three older bugs in the intel_pstate driver. Specifics: - Fix a recent regression in the cpufreq core causing it to fail to clean up sysfs directories properly on cpufreq driver removal (Viresh Kumar). - Fix a build problem in the SCPI support code recently added to the arm_big_little cpufreq driver (Punit Agrawal). - Fix up the recently added CPPC cpufreq frontend to process the CPU coordination information provided by the platform firmware correctly (Ashwin Chaugule). - Fix the intel_pstate driver to behave as intended when switched over to the "performance" mode via sysfs if hardware-driven P-state selection (HWP) is enabled (Alexandra Yates). - Fix two rounding errors in the intel_pstate driver that sometimes cause it to use lower P-states than requested (Prarit Bhargava)" * tag 'pm+acpi-4.4-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: intel_pstate: Fix "performance" mode behavior with HWP enabled cpufreq: SCPI: Depend on SCPI clk driver cpufreq: intel_pstate: Fix limits->max_perf rounding error cpufreq: intel_pstate: Fix limits->max_policy_pct rounding error cpufreq: Always remove sysfs cpuX/cpufreq link on ->remove_dev() cpufreq: CPPC: Initialize and check CPUFreq CPU co-ord type correctly
-
git://anongit.freedesktop.org/git/nouveau/linux-2.6Dave Airlie authored
Ben Skeggs wrote: A couple of regression fixes, some more boards whitelisted for a hw bug workaround, gr/ucode fixes for hangs a user is seeing. The changes look larger than they actually are due to the ucode binaries (*.fucN.h) being regenerated. * 'linux-4.4' of git://anongit.freedesktop.org/git/nouveau/linux-2.6: drm/nouveau/volt/pwm/gk104: fix an off-by-one resulting in the voltage not being set drm/nouveau/nvif: allow userspace access to its own client object drm/nouveau/gr/gf100-: fix oops when calling zbc methods drm/nouveau/gr/gf117-: assume no PPC if NV_PGRAPH_GPC_GPM_PD_PES_TPC_ID_MASK is zero drm/nouveau/gr/gf117-: read NV_PGRAPH_GPC_GPM_PD_PES_TPC_ID_MASK from correct GPC drm/nouveau/gr/gf100-: split out per-gpc address calculation macro drm/nouveau/bios: return actual size of the buffer retrieved via _ROM drm/nouveau/instmem: protect instobj list with a spinlock drm/nouveau/pci: enable c800 magic for some unknown Samsung laptop drm/nouveau/pci: enable c800 magic for Clevo P157SM
-
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/soundLinus Torvalds authored
Pull sound fixes from Takashi Iwai: "Here are no big surprises but just all small fixes, mostly device-specific quirks for HD-audio and USB-audio: - Fix for detection of FireWire DICE Loud devices - Intel Broxton HDMI/DP PCI IDs and relevant quirks - Noise fixes: Dell XPS13 2015 model, Dell Latitude E6440, Gigabyte Z170X mobo - Fix the headphone mixer assignment on HP laptops for PulseAudio - USB-MIDI fixes for Medeli DD305 and CH345 - Apply fixup for Acer Aspire One Cloudbook 14" * tag 'sound-4.4-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: ALSA: hda - Fix noise on Gigabyte Z170X mobo ALSA: hda - Fix headphone noise after Dell XPS 13 resume back from S3 ALSA: hda - Apply HP headphone fixups more generically ALSA: hda - Add fixup for Acer Aspire One Cloudbook 14 ALSA: hda - apply SKL display power request/release patch to BXT ALSA: hda - add PCI IDs for Intel Broxton ALSA: usb-audio: work around CH345 input SysEx corruption ALSA: usb-audio: prevent CH345 multiport output SysEx corruption ALSA: usb-audio: add packet size quirk for the Medeli DD305 ALSA: dice: fix detection of Loud devices ALSA: hda - Fix noise on Dell Latitude E6440
-
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linuxLinus Torvalds authored
Pull arm64 fixes from Catalin Marinas: - Build fix when !CONFIG_UID16 (the patch is touching generic files but it only affects arm64 builds; submitted by Arnd Bergmann) - EFI fixes to deal with early_memremap() returning NULL and correctly mapping run-time regions - Fix CPUID register extraction of unsigned fields (not to be sign-extended) - ASID allocator fix to deal with long-running tasks over multiple generation roll-overs - Revert support for marking page ranges as contiguous PTEs (it leads to TLB conflicts and requires additional non-trivial kernel changes) - Proper early_alloc() failure check - Disable KASan for 48-bit VA and 16KB page configuration (the pgd is larger than the KASan shadow memory) - Update the fault_info table (original descriptions based on early engineering spec) * tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: arm64: efi: fix initcall return values arm64: efi: deal with NULL return value of early_memremap() arm64: debug: Treat the BRPs/WRPs as unsigned arm64: cpufeature: Track unsigned fields arm64: cpufeature: Add helpers for extracting unsigned values Revert "arm64: Mark kernel page ranges contiguous" arm64: mm: keep reserved ASIDs in sync with mm after multiple rollovers arm64: KASAN depends on !(ARM64_16K_PAGES && ARM64_VA_BITS_48) arm64: efi: correctly map runtime regions arm64: mm: fix fault_info table xFSC decoding arm64: fix building without CONFIG_UID16 arm64: early_alloc: Fix check for allocation failure
-
git://git.kernel.org/pub/scm/linux/kernel/git/lftan/nios2Linus Torvalds authored
Pull nios2 fix from Ley Foon Tan: "nios2: fix cache coherency" * tag 'nios2-v4.4-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/lftan/nios2: nios2: fix cache coherency
-
Ralf Baechle authored
GCC 4.1 and newer remove empty loops. This becomes a problem when delay loops get removed. Fixed by rewriting to user the proper Linux interface for such delays. Signed-off-by:
Ralf Baechle <ralf@linux-mips.org> Reported-by:
Rasmus Villemoes <linux@rasmusvillemoes.dk> Acked-by:
John Crispin <blogic@openwrt.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arcLinus Torvalds authored
Pull ARC fixes from Vineet Gupta: - Fix for perf callgraph unwinding causing RCU stalls - Fix to enable Linux to run on non-default Interrupt priority 0 - Removal of pointless SYNC from __switch_to() * tag 'arc-4.4-rc3-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc: ARC: dw2 unwind: Remove falllback linear search thru FDE entries ARC: remove SYNC from __switch_to() ARCv2: Use the default irq priority for idle sleep ARC: Abstract out ISA specific SLEEP args ARC: comments update ARC: switch to arc-linux- CROSS_COMPILE prefix across all configs
-
Arnd Bergmann authored
Merge tag 'v4.4-rockchip-dts32-fixes1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into fixes Merge "ARM: rockchip: devicetree fixes for 4.4" from Heiko Stuebner: Two fixes to Rockchip devicetree files, disabling the mmc-tuning on the veyron-minnie board for now and adding the init state for the over-temperature-protection to prevent glitches making the system reboot sometimes. * tag 'v4.4-rockchip-dts32-fixes1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: ARM: dts: rockchip: Add OTP gpio pinctrl to rk3288 tsadc node ARM: dts: rockchip: temporarily remove emmc hs200 speed from rk3288 minnie
-