- Apr 29, 2008
-
-
Zhang Wei authored
Signed-off-by:
Zhang Wei <wei.zhang@freescale.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Paul Mackerras <paulus@samba.org>
-
Zhang Wei authored
The driver is suitable for the Freescale MPC8641 processor as well as 85xx processors, so this changes the mpc85xx prefix to fsl. Signed-off-by:
Zhang Wei <wei.zhang@freescale.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Paul Mackerras <paulus@samba.org>
-
Badari Pulavarty authored
Provide walk_memory_resource() for 64-bit powerpc. PowerPC maintains logical memory region mapping in the lmb.memory structure. Walk through these structures and do the callbacks for the contiguous chunks. Signed-off-by:
Badari Pulavarty <pbadari@us.ibm.com> Cc: Yasunori Goto <y-goto@jp.fujitsu.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Paul Mackerras <paulus@samba.org>
-
Badari Pulavarty authored
The powerpc kernel maintains information about logical memory blocks in the lmb.memory structure, which is initialized and updated at boot time, but not when memory is added or removed while the kernel is running. This adds a hotplug memory notifier which updates lmb.memory when memory is added or removed. This information is useful for eHEA driver to find out the memory layout and holes. NOTE: No special locking is needed for lmb_add() and lmb_remove(). Calls to these are serialized by caller. (pSeries_reconfig_chain). Signed-off-by:
Badari Pulavarty <pbadari@us.ibm.com> Cc: Yasunori Goto <y-goto@jp.fujitsu.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: "David S. Miller" <davem@davemloft.net> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Paul Mackerras <paulus@samba.org>
-
Badari Pulavarty authored
Hotplug memory remove notifier for 64-bit powerpc. This gets invoked by writing to /proc/ppc64/ofdt the string "remove_node " followed by the firmware device tree pathname of the node that needs to be removed. In response, this adjusts the sections and removes sysfs entries by calling __remove_pages(). Then it calls arch-specific code to get rid of the hardware MMU mappings for the section of memory. Signed-off-by:
Badari Pulavarty <pbadari@us.ibm.com> Reviewed-by:
Michael Ellerman <michael@ellerman.id.au> Cc: Yasunori Goto <y-goto@jp.fujitsu.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Paul Mackerras <paulus@samba.org>
-
Étienne Bersac authored
This implements a new driver named windfarm_pm121, which drives the fans on PowerMac 12,1 machines : iMac G5 iSight (rev C) 17" and 20". It's based on the windfarm_pm81 driver from Benjamin Herrenschmidt. This includes fixes from David Woodhouse correcting the names of some of the sensors. Signed-off-by:
Étienne Bersac <bersace@gmail.com> Signed-off-by:
David Woodhouse <dwmw2@infradead.org> Signed-off-by:
Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by:
Paul Mackerras <paulus@samba.org>
-
Tony Breeds authored
Kamalesh Babulal (kamalesh@linux.vnet.ibm.com) reports that CONFIG_NVRAM=m is valid in terms of Kconfig but fails to build with: Building modules, stage 2. MODPOST 1401 modules ERROR: "pmac_newworld" [arch/powerpc/platforms/powermac/nvram.ko] undefined! ERROR: "__alloc_bootmem" [arch/powerpc/platforms/powermac/nvram.ko] undefined! make[1]: *** [__modpost] Error The arch/powerpc/platforms/powermac/nvram.c code really needs to be builtin, but as its compilation is dependent on a generic Kconfig symbol we force nvram.c to be builtin if CONFIG_NVRAM is 'y' or 'm'. Signed-off-by:
Tony Breeds <tony@bakeyournoodle.com> Signed-off-by:
Paul Mackerras <paulus@samba.org>
-
Kumar Gala authored
This makes it possible to use separate stacks for hard and soft IRQs on 32-bit powerpc as well as on 64-bit. The code for 32-bit is just the 32-bit analog of the 64-bit code. * Added allocation and initialization of the irq stacks. We limit the stacks to be in lowmem for ppc32. * Implemented ppc32 versions of call_do_softirq() and call_handle_irq() to switch the stack pointers * Reworked how we do stack overflow detection. We now keep around the limit of the stack in the thread_struct and compare against the limit to see if we've overflowed. We can now use this on ppc64 if desired. [ paulus@samba.org: Fixed bug on 6xx where we need to reload r9 with the thread_info pointer. ] Signed-off-by:
Kumar Gala <galak@kernel.crashing.org> Signed-off-by:
Paul Mackerras <paulus@samba.org>
-
Paul Mackerras authored
This changes the definitions of the xchg and cmpxchg families of functions in include/asm-powerpc/system.h to be marked __always_inline rather than __inline__. The reason for doing this is that we rely on the compiler inlining them in order to eliminate the references to __xchg_called_with_bad_pointer and __cmpxchg_called_with_bad_pointer, which are deliberately left undefined. Thus this change will enable us to make the inline keyword be just a hint rather than a directive. Signed-off-by:
Paul Mackerras <paulus@samba.org>
-
Paul Mackerras authored
This adds a system call on 64-bit platforms for switching between little-endian and big-endian modes that is much faster than doing a prctl call. This system call is handled as a special case right at the start of the system call entry code, and because it is a special case, it uses a system call number which is out of the range of normal system calls, namely 0x1ebe. Measurements with lmbench on a 4.2GHz POWER6 showed no measurable change in the speed of normal system calls with this patch. Switching endianness with this new system call takes around 60ns on a 4.2GHz POWER6, compared with around 300ns to switch endian mode with a prctl. This can provide a significant performance advantage for emulators for little-endian architectures that want to switch between big-endian and little-endian mode frequently, e.g. because they are generating instructions sequences on the fly and they want to run those sequences in little-endian mode. The other thing about this system call is that it doesn't clobber as many registers as a normal system call. It only clobbers r12. Signed-off-by:
Paul Mackerras <paulus@samba.org>
-
Harvey Harrison authored
Signed-off-by:
Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Harvey Harrison authored
drivers/media/video/v4l2-common.c:719:16: warning: Using plain integer as NULL pointer drivers/media/video/au0828/au0828-dvb.c:122:19: warning: Using plain integer as NULL pointer drivers/media/video/ivtv/ivtv-yuv.c:1101:22: warning: Using plain integer as NULL pointer drivers/media/video/ivtv/ivtv-yuv.c:1102:23: warning: Using plain integer as NULL pointer drivers/media/video/pvrusb2/pvrusb2-audio.c:78:39: warning: Using plain integer as NULL pointer drivers/media/video/pvrusb2/pvrusb2-video-v4l.c:84:39: warning: Using plain integer as NULL pointer drivers/media/video/pvrusb2/pvrusb2-v4l2.c:1264:9: warning: Using plain integer as NULL pointer drivers/media/video/pvrusb2/pvrusb2-context.c:197:28: warning: Using plain integer as NULL pointer drivers/media/video/pvrusb2/pvrusb2-cx2584x-v4l.c:126:39: warning: Using plain integer as NULL pointer drivers/media/video/pvrusb2/pvrusb2-dvb.c:133:32: warning: Using plain integer as NULL pointer drivers/media/video/pvrusb2/pvrusb2-dvb.c:145:31: warning: Using plain integer as NULL pointer drivers/media/video/pvrusb2/pvrusb2-dvb.c:177:55: warning: Using plain integer as NULL pointer drivers/media/video/videobuf-core.c:100:9: warning: Using plain integer as NULL pointer Signed-off-by:
Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Harvey Harrison authored
drivers/scsi/aic7xxx/aic7770_osm.c:53:58: warning: Using plain integer as NULL pointer drivers/scsi/aic7xxx/aic7xxx_osm_pci.c:355:47: warning: Using plain integer as NULL pointer drivers/scsi/aic7xxx/aic7xxx_osm_pci.c:372:55: warning: Using plain integer as NULL pointer drivers/scsi/aha152x.c:997:28: warning: Using plain integer as NULL pointer drivers/scsi/aha152x.c:1003:28: warning: Using plain integer as NULL pointer drivers/scsi/aha152x.c:1165:46: warning: Using plain integer as NULL pointer drivers/scsi/fdomain.c:1446:40: warning: Using plain integer as NULL pointer drivers/scsi/sym53c8xx_2/sym_hipd.c:1650:51: warning: Using plain integer as NULL pointer drivers/scsi/sym53c8xx_2/sym_hipd.c:3171:42: warning: Using plain integer as NULL pointer drivers/scsi/sym53c8xx_2/sym_hipd.c:5732:52: warning: Using plain integer as NULL pointer drivers/scsi/ncr53c8xx.c:8189:31: warning: Using plain integer as NULL pointer drivers/scsi/ncr53c8xx.c:8225:34: warning: Using plain integer as NULL pointer drivers/scsi/dpt_i2o.c:156:32: warning: Using plain integer as NULL pointer drivers/scsi/ultrastor.c:954:42: warning: Using plain integer as NULL pointer drivers/scsi/ultrastor.c:1104:18: warning: Using plain integer as NULL pointer Signed-off-by:
Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6Linus Torvalds authored
* git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6: (35 commits) siimage: coding style cleanup (take 2) ide-cd: clean up cdrom_analyze_sense_data() ide-cd: fix test unsigned var < 0 ide: add TSSTcorp CDDVDW SH-S202H to ivb_list[] piix: add Asus Eee 701 controller to short cable list ARM: always select HAVE_IDE remove the broken ETRAX_IDE driver ide: remove ->dma_prdtable field from ide_hwif_t ide: remove ->dma_vendor{1,3} fields from ide_hwif_t scc_pata: add ->dma_host_set and ->dma_start methods ide: skip "VLB sync" if host uses MMIO ide: add ide_pad_transfer() helper ide: remove ->INW and ->OUTW methods ide: use IDE I/O helpers directly in ide_tf_{load,read}() ns87415: add ->tf_read method scc_pata: add ->tf_{load,read} methods ide-h8300: add ->tf_{load,read} methods ide-cris: add ->tf_{load,read} methods ide: add ->tf_load and ->tf_read methods ide: move ide_tf_{load,read} to ide-iops.c ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/sam/kbuildLinus Torvalds authored
* git://git.kernel.org/pub/scm/linux/kernel/git/sam/kbuild: kconfig: add named choice group kconfig: fix choice dependency check kconifg: 'select' considered less evil dontdiff: ignore timeconst.h dontdiff: add modules.order kbuild: fix unportability in gen_initramfs_list.sh kbuild: fix help output to show correct arch kbuild: show defconfig subdirs in make help kconfig: reversed borderlines in inputbox
-
Harvey Harrison authored
drivers/atm/nicstar.c:418:25: warning: Using plain integer as NULL pointer drivers/char/drm/r128_cce.c:820:25: warning: Using plain integer as NULL pointer drivers/char/tty_io.c:1183:10: warning: Using plain integer as NULL pointer Signed-off-by:
Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Harvey Harrison authored
mm/hugetlb.c:207:11: warning: Using plain integer as NULL pointer Signed-off-by:
Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Harvey Harrison authored
kernel/cpuset.c:1268:52: warning: Using plain integer as NULL pointer kernel/pid_namespace.c:95:24: warning: Using plain integer as NULL pointer Signed-off-by:
Harvey Harrison <harvey.harrison@gmail.com> Reviewed-by:
Paul Jackson <pj@sgi.com> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Harvey Harrison authored
init/do_mounts_rd.c:215:13: warning: Using plain integer as NULL pointer init/do_mounts_md.c:136:45: warning: Using plain integer as NULL pointer Signed-off-by:
Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Sergei Shtylyov authored
Fix 18 errors and several warnings given by checkpatch.pl: - use of C99 // comments; - trailing whitespace; - 'switch' and 'case' not at the same indentation level; - no space before the open parenthesis of the 'if' and 'switch' statements; - space between function name and open parenthesis (though I have introduced such warnins in some places since the code looks prettier with the spaces); - including <asm/io.h> instead of <linux/io.h>; - line over 80 characters. In addition to these changes, also do the following: - make the arrays in sil_set_pio_mode() 'static', and make the arrays in sil_set_dma_mode() 'static const'; - change the string of the 'if' statements into the 'switch' statement in sil_pata_udma_filter(); - drop the needless '==' operators from the 'if' statements where a condition is a mere bit test; - remove needless initializer for the 'tmp' variable in init_chipset_siimage(); - beautify groups of the variable initializers and assignment operators; - add new line after variable definitions; - remove new line between the comment and the statements it refers to; - remove needless curly braces and parentheses; - fix typos, capitalize acronyms, etc. in the comments... Signed-off-by:
Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by:
Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
Roel Kluin authored
[bart: fix handling of bio_sectors(failed_command->bio) == 0] Signed-off-by:
Roel Kluin <12o3l@tiscali.nl> Cc: Borislav Petkov <petkovbb@gmail.com> Signed-off-by:
Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
Roel Kluin authored
valid is unsigned and cannot be below 0. Signed-off-by:
Roel Kluin <12o3l@tiscali.nl> Cc: Borislav Petkov <petkovbb@gmail.com> Signed-off-by:
Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
Alexander Smal authored
Signed-off-by:
Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
Bartlomiej Zolnierkiewicz authored
Based on ata_piix patch by Dan McGee. Signed-off-by:
Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
Adrian Bunk authored
It's plain wrong for PCMCIA to select HAVE_IDE that implies e.g. the availability of an asm/ide.h It turns out this was done for ARM, and we can simply always select HAVE_IDE on ARM instead of manually tracking which platforms might possible have an IDE controller directly or indirectly. Signed-off-by:
Adrian Bunk <bunk@kernel.org> Cc: Russell King <rmk+lkml@arm.linux.org.uk> Cc: Sam Ravnborg <sam@ravnborg.org> Signed-off-by:
Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
Adrian Bunk authored
ETRAX_IDE was marked as broken last year with the comment "it doesn't even compile currently". Remove it since it won't get fixed in the near future. On Mon, Apr 14, 2008 at 02:50:19PM +0200, Mikael Starvik wrote: > You can remove it for now and we will resubmit a new if/when we get around > to fix it. [bart: ported it over IDE tree] Signed-off-by:
Adrian Bunk <bunk@kernel.org> Cc: Mikael Starvik <mikael.starvik@axis.com> Cc: Jesper Nilsson <Jesper.Nilsson@axis.com> Signed-off-by:
Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
Bartlomiej Zolnierkiewicz authored
* Use 'hwif->dma_base + {4,8}' instead of hwif->dma_prdtable in {ide,scc}_dma_setup(). * Remove no longer needed ->dma_prdtable field from ide_hwif_t. While at it: * Use ATA_DMA_TABLE_OFS define. Acked-by:
Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by:
Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
Bartlomiej Zolnierkiewicz authored
* Use 'hwif->dma_base + {1,3}' instead of hwif->dma_vendor{1,3} in pdc202xx_new host driver. * Remove no longer needed ->dma_vendor{1,3} fields from ide_hwif_t. Acked-by:
Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by:
Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
Bartlomiej Zolnierkiewicz authored
Add ->dma_host_set and ->dma_start methods (+ __scc_dma_end() helper) so scc_ide_{in,out}b() can be used directly. There should be no functional changes caused by this patch. Acked-by:
Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by:
Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
Bartlomiej Zolnierkiewicz authored
* Skip "VLB sync" in ata_{in,out}put_data() if host uses MMIO. * Use I/O ops directly in ata_vlb_sync() an drop no longer needed 'ide_drive_t *drive' argument. Acked-by:
Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by:
Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
Bartlomiej Zolnierkiewicz authored
* Add ide_pad_transfer() helper (which uses ->{in,out}put_data methods internally so the transfer is also padded to drive+host requirements) and use it instead of ide_atapi_{write_zeros,discard_data}(). * Remove no longer needed ide_atapi_{write_zeros,discard_data}(). Cc: Borislav Petkov <petkovbb@gmail.com> Acked-by:
Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by:
Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
Bartlomiej Zolnierkiewicz authored
* Remove no longer used ->INW and ->OUTW methods. While at it: * scc_pata.c: scc_ide_{out,in}w() is called only in scc_tf_{load,read}() so inline it there. Signed-off-by:
Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
Bartlomiej Zolnierkiewicz authored
There should be no functional changes caused by this patch. Signed-off-by:
Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
Bartlomiej Zolnierkiewicz authored
Add ->tf_read method so out{b,w}(), in{b,w}() and superio_ide_inb() can be used directly. There should be no functional changes caused by this patch. Signed-off-by:
Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
Bartlomiej Zolnierkiewicz authored
Add ->tf_{load,read} methods so scc_ide_{outb,outw,inb,inw}() can be used directly. There should be no functional changes caused by this patch. Signed-off-by:
Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
Bartlomiej Zolnierkiewicz authored
Add ->tf_{load,read} methods so outb()/inb() and mm_outw()/mm_inw() can be used directly. There should be no functional changes caused by this patch. Signed-off-by:
Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
Bartlomiej Zolnierkiewicz authored
Add ->tf_{load,read} methods so cris_ide_{outb,outw,inb,inw}() can be used directly. There should be no functional changes caused by this patch. Signed-off-by:
Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
Bartlomiej Zolnierkiewicz authored
* Add ->tf_load and ->tf_read methods to ide_hwif_t and set the default methods in default_hwif_transport(). * Use ->tf_{load,read} instead o calling ide_tf_{load,read}() directly. * Make ide_tf_{load,read}() static. There should be no functional changes caused by this patch. Acked-by:
Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by:
Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
Bartlomiej Zolnierkiewicz authored
Signed-off-by:
Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
Bartlomiej Zolnierkiewicz authored
Factor out debugging code from ide_tf_load() to ide_tf_dump() helper and update ide_tf_load() users accordingly. Signed-off-by:
Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-