- Feb 09, 2022
-
-
Dan Carpenter authored
commit 4c907bcd upstream. Check for negative values of "priv->gain" to prevent an out of bounds access. The concern is that these might come from the user via: -> snd_ctl_elem_write_user() -> snd_ctl_elem_write() -> kctl->put() Fixes: fa8d9151 ("ASoC: max9759: Add Amplifier Driver") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Link: https://lore.kernel.org/r/20220119123101.GA9509@kili Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
蒋家盛 authored
commit f7a6021a upstream. If the device does not exist, of_get_child_by_name() will return NULL pointer. And devm_snd_soc_register_component() does not check it. Also, I have noticed that cpcap_codec_driver has not been used yet. Therefore, it should be better to check it in order to avoid the future dereference of the NULL pointer. Fixes: f6cdf2d3 ("ASoC: cpcap: new codec") Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn> Link: https://lore.kernel.org/r/20220111025048.524134-1-jiasheng@iscas.ac.cn Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Robert Hancock authored
commit a64067f4 upstream. A previous change to simple-card resulted in asoc_simple_parse_dai attempting to retrieve the dai_name for platform components, which are unlikely to have a valid DAI name. This caused simple-card to fail to probe when using the xlnx_formatter_pcm as the platform component, since it does not register any DAI components. Since the dai_name is not used for platform components, just skip trying to retrieve it for those. Fixes: f107294c ("ASoC: simple-card: support snd_soc_dai_link_component style for cpu") Signed-off-by: Robert Hancock <robert.hancock@calian.com> Link: https://lore.kernel.org/r/20220107214711.1100162-6-robert.hancock@calian.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Robert Hancock authored
commit e958b588 upstream. This patch is based on one in the Xilinx kernel tree, "ASoc: xlnx: Make buffer bytes multiple of period bytes" by Devarsh Thakkar. The same issue exists in the mainline version of the driver. The original patch description is as follows: "The Xilinx Audio Formatter IP has a constraint on period bytes to be multiple of 64. This leads to driver changing the period size to suitable frames such that period bytes are multiple of 64. Now since period bytes and period size are updated but not the buffer bytes, this may make the buffer bytes unaligned and not multiple of period bytes. When this happens we hear popping noise as while DMA is being done the buffer bytes are not enough to complete DMA access for last period of frame within the application buffer boundary. To avoid this, align buffer bytes too as multiple of 64, and set another constraint to always enforce number of periods as integer. Now since, there is already a rule in alsa core to enforce Buffer size = Number of Periods * Period Size this automatically aligns buffer bytes as multiple of period bytes." Fixes: 6f6c3c36 ("ASoC: xlnx: add pcm formatter platform driver") Cc: Devarsh Thakkar <devarsh.thakkar@xilinx.com> Signed-off-by: Robert Hancock <robert.hancock@calian.com> Link: https://lore.kernel.org/r/20220107214711.1100162-2-robert.hancock@calian.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Miaoqian Lin authored
commit fb25621d upstream. Add the missing platform_device_put() and platform_device_del() before return from pcm030_fabric_probe in the error handling case. Fixes: c912fa91 ("ASoC: fsl: register the wm9712-codec") Signed-off-by: Miaoqian Lin <linmq006@gmail.com> Link: https://lore.kernel.org/r/20220127131336.30214-1-linmq006@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Peter Ujfalusi authored
commit 4045daf0 upstream. On resume from suspend the following chain of events can happen: A rt5682_resume() -> mod_delayed_work() for jack_detect_work B DAPM sequence starts ( DAPM is locked now) A1. rt5682_jack_detect_handler() scheduled - Takes both jdet_mutex and calibrate_mutex - Calls in to rt5682_headset_detect() which tries to take DAPM lock, it starts to wait for it as B path took it already. B1. DAPM sequence reaches the "HP Amp", rt5682_hp_event() tries to take the jdet_mutex, but it is locked in A1, so it waits. Deadlock. To solve the deadlock, drop the jdet_mutex, use the jack_detect_work to do the jack removal handling, move the dapm lock up one level to protect the most of the rt5682_jack_detect_handler(), but not the jack reporting as it might trigger a DAPM sequence. The rt5682_headset_detect() can be changed to static as well. Fixes: 8deb34a9 ("ASoC: rt5682: fix the wrong jack type detected") Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com> Link: https://lore.kernel.org/r/20220126100325.16513-1-peter.ujfalusi@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Mario Limonciello authored
commit e55a3aea upstream. dGPUs connected to Intel systems configured for suspend to idle will not have the power rails cut at suspend and resetting the GPU may lead to problematic behaviors. Fixes: e25443d2 ("drm/amdgpu: add a dev_pm_ops prepare callback (v2)") Link: https://gitlab.freedesktop.org/drm/amd/-/issues/1879 Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Matthew Brost authored
commit 5ae13c30 upstream. Don't use the interruptable version of the timeline mutex lock in the error path of eb_pin_timeline as the cleanup must always happen. v2: (John Harrison) - Don't check for interrupt during mutex lock v3: (Tvrtko) - A comment explaining why lock helper isn't used Fixes: 544460c3 ("drm/i915: Multi-BB execbuf") Signed-off-by: Matthew Brost <matthew.brost@intel.com> Reviewed-by: John Harrison <John.C.Harrison@Intel.com> Signed-off-by: John Harrison <John.C.Harrison@Intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220111163929.14017-1-matthew.brost@intel.com (cherry picked from commit cb935c46 ) Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Dan Carpenter authored
commit 90a3d22f upstream. Smatch detected a divide by zero bug in check_overlay_scaling(). drivers/gpu/drm/i915/display/intel_overlay.c:976 check_overlay_scaling() error: potential divide by zero bug '/ rec->dst_height'. drivers/gpu/drm/i915/display/intel_overlay.c:980 check_overlay_scaling() error: potential divide by zero bug '/ rec->dst_width'. Prevent this by ensuring that the dst height and width are non-zero. Fixes: 02e792fb ("drm/i915: implement drmmode overlay support v4") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220124122409.GA31673@kili (cherry picked from commit cf5b64f7 ) Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Anitha Chrisanthus authored
commit 43f25179 upstream. This fixes the following build error drivers/gpu/drm/kmb/kmb_plane.c: In function 'kmb_plane_atomic_disable': drivers/gpu/drm/kmb/kmb_plane.c:165:34: error: array subscript 3 is above array bounds of 'struct layer_status[2]' [-Werror=array-bounds] 165 | kmb->plane_status[plane_id].ctrl = LCD_CTRL_GL2_ENABLE; | ~~~~~~~~~~~~~~~~~^~~~~~~~~~ In file included from drivers/gpu/drm/kmb/kmb_plane.c:17: drivers/gpu/drm/kmb/kmb_drv.h:61:41: note: while referencing 'plane_status' 61 | struct layer_status plane_status[KMB_MAX_PLANES]; | ^~~~~~~~~~~~ drivers/gpu/drm/kmb/kmb_plane.c:162:34: error: array subscript 2 is above array bounds of 'struct layer_status[2]' [-Werror=array-bounds] 162 | kmb->plane_status[plane_id].ctrl = LCD_CTRL_GL1_ENABLE; | ~~~~~~~~~~~~~~~~~^~~~~~~~~~ In file included from drivers/gpu/drm/kmb/kmb_plane.c:17: drivers/gpu/drm/kmb/kmb_drv.h:61:41: note: while referencing 'plane_status' 61 | struct layer_status plane_status[KMB_MAX_PLANES]; | ^~~~~~~~~~~~ Fixes: 7f7b96a8 ("drm/kmb: Add support for KeemBay Display") Signed-off-by: Anitha Chrisanthus <anitha.chrisanthus@intel.com> Reviewed-by: Kees Cook <keescook@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/20220127194227.2213608-1-anitha.chrisanthus@intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Alexander Stein authored
commit 622c9a3a upstream. mxsfb should not ever dereference the NULL pointer which drm_atomic_get_new_bridge_state is allowed to return. Assume a fixed format instead. Fixes: b776b0f0 ("drm: mxsfb: Use bus_format from the nearest bridge if present") Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com> Signed-off-by: Marek Vasut <marex@denx.de> Link: https://patchwork.freedesktop.org/patch/msgid/20220202081755.145716-3-alexander.stein@ew.tq-group.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Yannick Vignon authored
commit 80d46090 upstream. Even if protected from preemption and interrupts, a small time window remains when the 2 register reads could return inconsistent values, each time the "seconds" register changes. This could lead to an about 1-second error in the reported time. Add logic to ensure the "seconds" and "nanoseconds" values are consistent. Fixes: 92ba6888 ("stmmac: add the support for PTP hw clock driver") Signed-off-by: Yannick Vignon <yannick.vignon@nxp.com> Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Link: https://lore.kernel.org/r/20220203160025.750632-1-yannick.vignon@oss.nxp.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Daniel Borkmann authored
commit 4a81f6da upstream. syzkaller was able to trigger a deadlock for NTF_MANAGED entries [0]: kworker/0:16/14617 is trying to acquire lock: ffffffff8d4dd370 (&tbl->lock){++-.}-{2:2}, at: ___neigh_create+0x9e1/0x2990 net/core/neighbour.c:652 [...] but task is already holding lock: ffffffff8d4dd370 (&tbl->lock){++-.}-{2:2}, at: neigh_managed_work+0x35/0x250 net/core/neighbour.c:1572 The neighbor entry turned to NUD_FAILED state, where __neigh_event_send() triggered an immediate probe as per commit cd28ca0a ("neigh: reduce arp latency") via neigh_probe() given table lock was held. One option to fix this situation is to defer the neigh_probe() back to the neigh_timer_handler() similarly as pre cd28ca0a. For the case of NTF_MANAGED, this deferral is acceptable given this only happens on actual failure state and regular / expected state is NUD_VALID with the entry already present. The fix adds a parameter to __neigh_event_send() in order to communicate whether immediate probe is allowed or disallowed. Existing call-sites of neigh_event_send() default as-is to immediate probe. However, the neigh_managed_work() disables it via use of neigh_event_send_probe(). [0] <TASK> __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0xcd/0x134 lib/dump_stack.c:106 print_deadlock_bug kernel/locking/lockdep.c:2956 [inline] check_deadlock kernel/locking/lockdep.c:2999 [inline] validate_chain kernel/locking/lockdep.c:3788 [inline] __lock_acquire.cold+0x149/0x3ab kernel/locking/lockdep.c:5027 lock_acquire kernel/locking/lockdep.c:5639 [inline] lock_acquire+0x1ab/0x510 kernel/locking/lockdep.c:5604 __raw_write_lock_bh include/linux/rwlock_api_smp.h:202 [inline] _raw_write_lock_bh+0x2f/0x40 kernel/locking/spinlock.c:334 ___neigh_create+0x9e1/0x2990 net/core/neighbour.c:652 ip6_finish_output2+0x1070/0x14f0 net/ipv6/ip6_output.c:123 __ip6_finish_output net/ipv6/ip6_output.c:191 [inline] __ip6_finish_output+0x61e/0xe90 net/ipv6/ip6_output.c:170 ip6_finish_output+0x32/0x200 net/ipv6/ip6_output.c:201 NF_HOOK_COND include/linux/netfilter.h:296 [inline] ip6_output+0x1e4/0x530 net/ipv6/ip6_output.c:224 dst_output include/net/dst.h:451 [inline] NF_HOOK include/linux/netfilter.h:307 [inline] ndisc_send_skb+0xa99/0x17f0 net/ipv6/ndisc.c:508 ndisc_send_ns+0x3a9/0x840 net/ipv6/ndisc.c:650 ndisc_solicit+0x2cd/0x4f0 net/ipv6/ndisc.c:742 neigh_probe+0xc2/0x110 net/core/neighbour.c:1040 __neigh_event_send+0x37d/0x1570 net/core/neighbour.c:1201 neigh_event_send include/net/neighbour.h:470 [inline] neigh_managed_work+0x162/0x250 net/core/neighbour.c:1574 process_one_work+0x9ac/0x1650 kernel/workqueue.c:2307 worker_thread+0x657/0x1110 kernel/workqueue.c:2454 kthread+0x2e9/0x3a0 kernel/kthread.c:377 ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:295 </TASK> Fixes: 7482e384 ("net, neigh: Add NTF_MANAGED flag for managed neighbor entries") Reported-by: <syzbot+5239d0e1778a500d477a@syzkaller.appspotmail.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Cc: Eric Dumazet <edumazet@google.com> Cc: Roopa Prabhu <roopa@nvidia.com> Tested-by: <syzbot+5239d0e1778a500d477a@syzkaller.appspotmail.com> Reviewed-by: David Ahern <dsahern@kernel.org> Link: https://lore.kernel.org/r/20220201193942.5055-1-daniel@iogearbox.net Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Camel Guo authored
commit 7af037c3 upstream. Unlike gmac100, gmac1000, gmac4 has 27 DMA registers and they are located at DMA_CHAN_BASE_ADDR (0x1100). In order for ethtool to dump gmac4 DMA registers correctly, this commit checks if a net_device has gmac4 and uses different logic to dump its DMA registers. This fixes the following KASAN warning, which can normally be triggered by a command similar like "ethtool -d eth0": BUG: KASAN: vmalloc-out-of-bounds in dwmac4_dump_dma_regs+0x6d4/0xb30 Write of size 4 at addr ffffffc010177100 by task ethtool/1839 kasan_report+0x200/0x21c __asan_report_store4_noabort+0x34/0x60 dwmac4_dump_dma_regs+0x6d4/0xb30 stmmac_ethtool_gregs+0x110/0x204 ethtool_get_regs+0x200/0x4b0 dev_ethtool+0x1dac/0x3800 dev_ioctl+0x7c0/0xb50 sock_ioctl+0x298/0x6c4 ... Fixes: fbf68229 ("net: stmmac: unify registers dumps methods") Signed-off-by: Camel Guo <camelg@axis.com> Link: https://lore.kernel.org/r/20220131083841.3346801-1-camel.guo@axis.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Lior Nahmanson authored
commit d0cfa548 upstream. When setting Tx sci explicit, the Rx side is expected to use this sci and not recalculate it from the packet.However, in case of Tx sci is explicit and send_sci is off, the receiver is wrongly recalculate the sci from the source MAC address which most likely be different than the explicit sci. Fix by preventing such configuration when macsec newlink is established and return EINVAL error code on such cases. Fixes: c09440f7 ("macsec: introduce IEEE 802.1AE driver") Signed-off-by: Lior Nahmanson <liorna@nvidia.com> Reviewed-by: Raed Salem <raeds@nvidia.com> Signed-off-by: Raed Salem <raeds@nvidia.com> Link: https://lore.kernel.org/r/1643542672-29403-1-git-send-email-raeds@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Lior Nahmanson authored
commit 9cef24c8 upstream. Current macsec netdev notify handler handles NETDEV_UNREGISTER event by releasing relevant SW resources only, this causes resources leak in case of macsec HW offload, as the underlay driver was not notified to clean it's macsec offload resources. Fix by calling the underlay driver to clean it's relevant resources by moving offload handling from macsec_dellink() to macsec_common_dellink() when handling NETDEV_UNREGISTER event. Fixes: 3cf3227a ("net: macsec: hardware offloading infrastructure") Signed-off-by: Lior Nahmanson <liorna@nvidia.com> Reviewed-by: Raed Salem <raeds@nvidia.com> Signed-off-by: Raed Salem <raeds@nvidia.com> Reviewed-by: Antoine Tenart <atenart@kernel.org> Link: https://lore.kernel.org/r/1643542141-28956-1-git-send-email-raeds@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Jisheng Zhang authored
commit 64495203 upstream. There are two issues with runtime pm handling in stmmac_dvr_remove(): 1. the mac is runtime suspended before stopping dma and rx/tx. We need to ensure the device is properly resumed back. 2. the stmmaceth clk enable/disable isn't balanced in both exit and error handling code path. Take the exit code path for example, when we unbind the driver or rmmod the driver module, the mac is runtime suspended as said above, so the stmmaceth clk is disabled, but stmmac_dvr_remove() stmmac_remove_config_dt() clk_disable_unprepare() CCF will complain this time. The error handling code path suffers from the similar situtaion. Here are kernel warnings in error handling code path on Allwinner D1 platform: [ 1.604695] ------------[ cut here ]------------ [ 1.609328] bus-emac already disabled [ 1.613015] WARNING: CPU: 0 PID: 38 at drivers/clk/clk.c:952 clk_core_disable+0xcc/0xec [ 1.621039] CPU: 0 PID: 38 Comm: kworker/u2:1 Not tainted 5.14.0-rc4#1 [ 1.627653] Hardware name: Allwinner D1 NeZha (DT) [ 1.632443] Workqueue: events_unbound deferred_probe_work_func [ 1.638286] epc : clk_core_disable+0xcc/0xec [ 1.642561] ra : clk_core_disable+0xcc/0xec [ 1.646835] epc : ffffffff8023c2ec ra : ffffffff8023c2ec sp : ffffffd00411bb10 [ 1.654054] gp : ffffffff80ec9988 tp : ffffffe00143a800 t0 : ffffffff80ed6a6f [ 1.661272] t1 : ffffffff80ed6a60 t2 : 0000000000000000 s0 : ffffffe001509e00 [ 1.668489] s1 : 0000000000000001 a0 : 0000000000000019 a1 : ffffffff80e80bd8 [ 1.675707] a2 : 00000000ffffefff a3 : 00000000000000f4 a4 : 0000000000000002 [ 1.682924] a5 : 0000000000000001 a6 : 0000000000000030 a7 : 00000000028f5c29 [ 1.690141] s2 : 0000000000000800 s3 : ffffffe001375000 s4 : ffffffe01fdf7a80 [ 1.697358] s5 : ffffffe001375010 s6 : ffffffff8001fc10 s7 : ffffffffffffffff [ 1.704577] s8 : 0000000000000001 s9 : ffffffff80ecb248 s10: ffffffe001b80000 [ 1.711794] s11: ffffffe001b80760 t3 : 0000000000000062 t4 : ffffffffffffffff [ 1.719012] t5 : ffffffff80e0f6d8 t6 : ffffffd00411b8f0 [ 1.724321] status: 8000000201800100 badaddr: 0000000000000000 cause: 0000000000000003 [ 1.732233] [<ffffffff8023c2ec>] clk_core_disable+0xcc/0xec [ 1.737810] [<ffffffff80240430>] clk_disable+0x38/0x78 [ 1.742956] [<ffffffff8001fc0c>] worker_thread+0x1a8/0x4d8 [ 1.748451] [<ffffffff8031a500>] stmmac_remove_config_dt+0x1c/0x4c [ 1.754646] [<ffffffff8031c8ec>] sun8i_dwmac_probe+0x378/0x82c [ 1.760484] [<ffffffff8001fc0c>] worker_thread+0x1a8/0x4d8 [ 1.765975] [<ffffffff8029a6c8>] platform_probe+0x64/0xf0 [ 1.771382] [<ffffffff8029833c>] really_probe.part.0+0x8c/0x30c [ 1.777305] [<ffffffff8029865c>] __driver_probe_device+0xa0/0x148 [ 1.783402] [<ffffffff8029873c>] driver_probe_device+0x38/0x138 [ 1.789324] [<ffffffff802989cc>] __device_attach_driver+0xd0/0x170 [ 1.795508] [<ffffffff802988f8>] __driver_attach_async_helper+0xbc/0xc0 [ 1.802125] [<ffffffff802965ac>] bus_for_each_drv+0x68/0xb4 [ 1.807701] [<ffffffff80298d1c>] __device_attach+0xd8/0x184 [ 1.813277] [<ffffffff802967b0>] bus_probe_device+0x98/0xbc [ 1.818852] [<ffffffff80297904>] deferred_probe_work_func+0x90/0xd4 [ 1.825122] [<ffffffff8001f8b8>] process_one_work+0x1e4/0x390 [ 1.830872] [<ffffffff8001fd80>] worker_thread+0x31c/0x4d8 [ 1.836362] [<ffffffff80026bf4>] kthreadd+0x94/0x188 [ 1.841335] [<ffffffff80026bf4>] kthreadd+0x94/0x188 [ 1.846304] [<ffffffff8001fa60>] process_one_work+0x38c/0x390 [ 1.852054] [<ffffffff80026564>] kthread+0x124/0x160 [ 1.857021] [<ffffffff8002643c>] set_kthread_struct+0x5c/0x60 [ 1.862770] [<ffffffff80001f08>] ret_from_syscall_rejected+0x8/0xc [ 1.868956] ---[ end trace 8d5c6046255f84a0 ]--- [ 1.873675] ------------[ cut here ]------------ [ 1.878366] bus-emac already unprepared [ 1.882378] WARNING: CPU: 0 PID: 38 at drivers/clk/clk.c:810 clk_core_unprepare+0xe4/0x168 [ 1.890673] CPU: 0 PID: 38 Comm: kworker/u2:1 Tainted: G W 5.14.0-rc4 #1 [ 1.898674] Hardware name: Allwinner D1 NeZha (DT) [ 1.903464] Workqueue: events_unbound deferred_probe_work_func [ 1.909305] epc : clk_core_unprepare+0xe4/0x168 [ 1.913840] ra : clk_core_unprepare+0xe4/0x168 [ 1.918375] epc : ffffffff8023d6cc ra : ffffffff8023d6cc sp : ffffffd00411bb10 [ 1.925593] gp : ffffffff80ec9988 tp : ffffffe00143a800 t0 : 0000000000000002 [ 1.932811] t1 : ffffffe01f743be0 t2 : 0000000000000040 s0 : ffffffe001509e00 [ 1.940029] s1 : 0000000000000001 a0 : 000000000000001b a1 : ffffffe00143a800 [ 1.947246] a2 : 0000000000000000 a3 : 00000000000000f4 a4 : 0000000000000001 [ 1.954463] a5 : 0000000000000000 a6 : 0000000005fce2a5 a7 : 0000000000000001 [ 1.961680] s2 : 0000000000000800 s3 : ffffffff80afeb90 s4 : ffffffe01fdf7a80 [ 1.968898] s5 : ffffffe001375010 s6 : ffffffff8001fc10 s7 : ffffffffffffffff [ 1.976115] s8 : 0000000000000001 s9 : ffffffff80ecb248 s10: ffffffe001b80000 [ 1.983333] s11: ffffffe001b80760 t3 : ffffffff80b39120 t4 : 0000000000000001 [ 1.990550] t5 : 0000000000000000 t6 : ffffffe001600002 [ 1.995859] status: 8000000201800120 badaddr: 0000000000000000 cause: 0000000000000003 [ 2.003771] [<ffffffff8023d6cc>] clk_core_unprepare+0xe4/0x168 [ 2.009609] [<ffffffff802403a0>] clk_unprepare+0x24/0x3c [ 2.014929] [<ffffffff8031a508>] stmmac_remove_config_dt+0x24/0x4c [ 2.021125] [<ffffffff8031c8ec>] sun8i_dwmac_probe+0x378/0x82c [ 2.026965] [<ffffffff8001fc0c>] worker_thread+0x1a8/0x4d8 [ 2.032463] [<ffffffff8029a6c8>] platform_probe+0x64/0xf0 [ 2.037871] [<ffffffff8029833c>] really_probe.part.0+0x8c/0x30c [ 2.043795] [<ffffffff8029865c>] __driver_probe_device+0xa0/0x148 [ 2.049892] [<ffffffff8029873c>] driver_probe_device+0x38/0x138 [ 2.055815] [<ffffffff802989cc>] __device_attach_driver+0xd0/0x170 [ 2.061999] [<ffffffff802988f8>] __driver_attach_async_helper+0xbc/0xc0 [ 2.068616] [<ffffffff802965ac>] bus_for_each_drv+0x68/0xb4 [ 2.074193] [<ffffffff80298d1c>] __device_attach+0xd8/0x184 [ 2.079769] [<ffffffff802967b0>] bus_probe_device+0x98/0xbc [ 2.085345] [<ffffffff80297904>] deferred_probe_work_func+0x90/0xd4 [ 2.091616] [<ffffffff8001f8b8>] process_one_work+0x1e4/0x390 [ 2.097367] [<ffffffff8001fd80>] worker_thread+0x31c/0x4d8 [ 2.102858] [<ffffffff80026bf4>] kthreadd+0x94/0x188 [ 2.107830] [<ffffffff80026bf4>] kthreadd+0x94/0x188 [ 2.112800] [<ffffffff8001fa60>] process_one_work+0x38c/0x390 [ 2.118551] [<ffffffff80026564>] kthread+0x124/0x160 [ 2.123520] [<ffffffff8002643c>] set_kthread_struct+0x5c/0x60 [ 2.129268] [<ffffffff80001f08>] ret_from_syscall_rejected+0x8/0xc [ 2.135455] ---[ end trace 8d5c6046255f84a1 ]--- Fixes: 5ec55823 ("net: stmmac: add clocks management for gmac driver") Signed-off-by: Jisheng Zhang <jszhang@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Yuji Ishikawa authored
commit 928d6fe9 upstream. Variable clk_sel_val is not initialized in the default case of the first switch statement. In that case, the function should return immediately without any changes to the hardware. Reported-by: kernel test robot <lkp@intel.com> Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Fixes: b38dd98f ("net: stmmac: Add Toshiba Visconti SoCs glue driver") Signed-off-by: Yuji Ishikawa <yuji2.ishikawa@toshiba.co.jp> Reviewed-by: Nobuhiro Iwamatsu <nobuhiro1.iwamatsu@toshiba.co.jp> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Wen Gu authored
commit 341adeec upstream. When we replace TCP with SMC and a fallback occurs, there may be some socket waitqueue entries remaining in smc socket->wq, such as eppoll_entries inserted by userspace applications. After the fallback, data flows over TCP/IP and only clcsocket->wq will be woken up. Applications can't be notified by the entries which were inserted in smc socket->wq before fallback. So we need a mechanism to wake up smc socket->wq at the same time if some entries remaining in it. The current workaround is to transfer the entries from smc socket->wq to clcsock->wq during the fallback. But this may cause a crash like this: general protection fault, probably for non-canonical address 0xdead000000000100: 0000 [#1] PREEMPT SMP PTI CPU: 3 PID: 0 Comm: swapper/3 Kdump: loaded Tainted: G E 5.16.0+ #107 RIP: 0010:__wake_up_common+0x65/0x170 Call Trace: <IRQ> __wake_up_common_lock+0x7a/0xc0 sock_def_readable+0x3c/0x70 tcp_data_queue+0x4a7/0xc40 tcp_rcv_established+0x32f/0x660 ? sk_filter_trim_cap+0xcb/0x2e0 tcp_v4_do_rcv+0x10b/0x260 tcp_v4_rcv+0xd2a/0xde0 ip_protocol_deliver_rcu+0x3b/0x1d0 ip_local_deliver_finish+0x54/0x60 ip_local_deliver+0x6a/0x110 ? tcp_v4_early_demux+0xa2/0x140 ? tcp_v4_early_demux+0x10d/0x140 ip_sublist_rcv_finish+0x49/0x60 ip_sublist_rcv+0x19d/0x230 ip_list_rcv+0x13e/0x170 __netif_receive_skb_list_core+0x1c2/0x240 netif_receive_skb_list_internal+0x1e6/0x320 napi_complete_done+0x11d/0x190 mlx5e_napi_poll+0x163/0x6b0 [mlx5_core] __napi_poll+0x3c/0x1b0 net_rx_action+0x27c/0x300 __do_softirq+0x114/0x2d2 irq_exit_rcu+0xb4/0xe0 common_interrupt+0xba/0xe0 </IRQ> <TASK> The crash is caused by privately transferring waitqueue entries from smc socket->wq to clcsock->wq. The owners of these entries, such as epoll, have no idea that the entries have been transferred to a different socket wait queue and still use original waitqueue spinlock (smc socket->wq.wait.lock) to make the entries operation exclusive, but it doesn't work. The operations to the entries, such as removing from the waitqueue (now is clcsock->wq after fallback), may cause a crash when clcsock waitqueue is being iterated over at the moment. This patch tries to fix this by no longer transferring wait queue entries privately, but introducing own implementations of clcsock's callback functions in fallback situation. The callback functions will forward the wakeup to smc socket->wq if clcsock->wq is actually woken up and smc socket->wq has remaining entries. Fixes: 2153bd1e ("net/smc: Transfer remaining wait queue entries during fallback") Suggested-by: Karsten Graul <kgraul@linux.ibm.com> Signed-off-by: Wen Gu <guwen@linux.alibaba.com> Acked-by: Karsten Graul <kgraul@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Miquel Raynal authored
commit 79c37ca7 upstream. Returning -1 does not indicate anything useful. Use a standard and meaningful error code instead. Fixes: a26c5fd7 ("nl802154: add support for security layer") Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Acked-by: Alexander Aring <aahringo@redhat.com> Link: https://lore.kernel.org/r/20220125121426.848337-6-miquel.raynal@bootlin.com Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Phil Sutter authored
commit aeac4554 upstream. Prior to commit fa538f7c ("netfilter: nf_reject: add reject skbuff creation helpers"), nft_reject_bridge did not assign to nskb->dev before passing nskb on to br_forward(). The shared skbuff creation helpers introduced in above commit do which seems to confuse br_forward() as reject statements in prerouting hook won't emit a packet anymore. Fix this by simply passing NULL instead of 'dev' to the helpers - they use the pointer for just that assignment, nothing else. Fixes: fa538f7c ("netfilter: nf_reject: add reject skbuff creation helpers") Signed-off-by: Phil Sutter <phil@nwl.cc> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Miquel Raynal authored
commit 621b24b0 upstream. Upon error the ieee802154_xmit_complete() helper is not called. Only ieee802154_wake_queue() is called manually. We then leak the skb structure. Free the skb structure upon error before returning. Fixes: ded845a7 ("ieee802154: Add CA8210 IEEE 802.15.4 device driver") Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Acked-by: Alexander Aring <aahringo@redhat.com> Link: https://lore.kernel.org/r/20220125121426.848337-5-miquel.raynal@bootlin.com Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Miquel Raynal authored
commit d753c400 upstream. These periods are expressed in time units (microseconds) while 40 and 12 are the number of symbol durations these periods will last. We need to multiply them both with phy->symbol_duration in order to get these values in microseconds. Fixes: 8c6ad9cc ("ieee802154: Add NXP MCR20A IEEE 802.15.4 transceiver driver") Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Acked-by: Alexander Aring <aahringo@redhat.com> Link: https://lore.kernel.org/r/20220125121426.848337-3-miquel.raynal@bootlin.com Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Miquel Raynal authored
commit 1293fccc upstream. Drivers are expected to set the PHY current_channel and current_page according to their default state. The hwsim driver is advertising being configured on channel 13 by default but that is not reflected in its own internal pib structure. In order to ensure that this driver consider the current channel as being 13 internally, we at least need to set the pib->channel field to 13. Fixes: f25da51f ("ieee802154: hwsim: add replacement for fakelb") Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> [stefan@datenfreihafen.org: fixed assigment from page to channel] Acked-by: Alexander Aring <aahringo@redhat.com> Link: https://lore.kernel.org/r/20220125121426.848337-2-miquel.raynal@bootlin.com Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Mark Zhang authored
commit b856101a upstream. In failure flow, the reference counter acquired was not released, and the following error was reported: drivers/infiniband/core/cm.c:3373 cm_lap_handler() warn: inconsistent refcounting 'cm_id_priv->refcount.refs.counter': Fixes: 7345201c ("IB/cm: Improve the calling of cm_init_av_for_lap and cm_init_av_by_path") Link: https://lore.kernel.org/r/7615f23bbb5c5b66d03f6fa13e1c99d51dae6916.1642581448.git.leonro@nvidia.com Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Mark Zhang <markzhang@nvidia.com> Signed-off-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Mike Marciniszyn authored
commit e5cce44a upstream. The tstats allocation is done in the accelerated ndo_init function but the allocation is not tested to succeed. The deallocation is not done in the accelerated ndo_uninit function. Resolve issues by testing for an allocation failure and adding the free_percpu in the uninit function. Fixes: aa0616a9 ("IB/hfi1: switch to core handling of rx/tx byte/packet counters") Link: https://lore.kernel.org/r/1642287756-182313-5-git-send-email-mike.marciniszyn@cornelisnetworks.com Reviewed-by: Dennis Dalessandro <dennis.dalessandro@cornelisnetworks.com> Signed-off-by: Mike Marciniszyn <mike.marciniszyn@cornelisnetworks.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Xin Xiong authored
commit 37c2c83c upstream. The issue happens in several error paths in uniphier_spi_probe(). When either dma_get_slave_caps() or devm_spi_register_master() returns an error code, the function forgets to decrease the refcount of both `dma_rx` and `dma_tx` objects, which may lead to refcount leaks. Fix it by decrementing the reference count of specific objects in those error paths. Signed-off-by: Xin Xiong <xiongx18@fudan.edu.cn> Signed-off-by: Xiyu Yang <xiyuyang19@fudan.edu.cn> Signed-off-by: Xin Tan <tanxin.ctf@gmail.com> Reviewed-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com> Fixes: 28d1dddc ("spi: uniphier: Add DMA transfer mode support") Link: https://lore.kernel.org/r/20220125101214.35677-1-xiongx18@fudan.edu.cn Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Miaoqian Lin authored
commit e937440f upstream. This check misses checking for platform_get_irq()'s call and may passes the negative error codes to devm_request_irq(), which takes unsigned IRQ #, causing it to fail with -EINVAL, overriding an original error code. Stop calling devm_request_irq() with invalid IRQ #s. Fixes: 454fa271 ("spi: Add Meson SPICC driver") Signed-off-by: Miaoqian Lin <linmq006@gmail.com> Link: https://lore.kernel.org/r/20220126110447.24549-1-linmq006@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Benjamin Gaignard authored
commit f83a96e5 upstream. In some case, like after a transfer timeout, master->cur_msg pointer is NULL which led to a kernel crash when trying to use master->cur_msg->spi. mtk_spi_can_dma(), pointed by master->can_dma, doesn't use this parameter avoid the problem by setting NULL as second parameter. Fixes: a568231f ("spi: mediatek: Add spi bus for Mediatek MT8173") Signed-off-by: Benjamin Gaignard <benjamin.gaignard@collabora.com> Link: https://lore.kernel.org/r/20220131141708.888710-1-benjamin.gaignard@collabora.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Kamal Dasu authored
commit 2cbd2726 upstream. Apply only valid chip select value. This change fixes case where chip select is set to initial value of '-1' during probe and PM supend and subsequent resume can try to use the value with undefined behaviour. Also in case where gpio based chip select, the check in bcm_qspi_chip_select() shall prevent undefined behaviour on resume. Fixes: fa236a7e ("spi: bcm-qspi: Add Broadcom MSPI driver") Signed-off-by: Kamal Dasu <kdasu.kdev@gmail.com> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Link: https://lore.kernel.org/r/20220127185359.27322-1-kdasu.kdev@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Joerg Roedel authored
commit 9b45a773 upstream. The polling loop for the register change in iommu_ga_log_enable() needs to have a udelay() in it. Otherwise the CPU might be faster than the IOMMU hardware and wrongly trigger the WARN_ON() further down the code stream. Use a 10us for udelay(), has there is some hardware where activation of the GA log can take more than a 100ms. A future optimization should move the activation check of the GA log to the point where it gets used for the first time. But that is a bigger change and not suitable for a fix. Fixes: 8bda0cfb ("iommu/amd: Detect and initialize guest vAPIC log") Signed-off-by: Joerg Roedel <jroedel@suse.de> Link: https://lore.kernel.org/r/20220204115537.3894-1-joro@8bytes.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Guoqing Jiang authored
commit 99e675d4 upstream. After commit e3beca48 ("irqdomain/treewide: Keep firmware node unconditionally allocated"). For tear down scenario, fn is only freed after fail to allocate ir_domain, though it also should be freed in case dmar_enable_qi returns error. Besides free fn, irq_domain and ir_msi_domain need to be removed as well if intel_setup_irq_remapping fails to enable queued invalidation. Improve the rewinding path by add out_free_ir_domain and out_free_fwnode lables per Baolu's suggestion. Fixes: e3beca48 ("irqdomain/treewide: Keep firmware node unconditionally allocated") Suggested-by: Lu Baolu <baolu.lu@linux.intel.com> Signed-off-by: Guoqing Jiang <guoqing.jiang@linux.dev> Link: https://lore.kernel.org/r/20220119063640.16864-1-guoqing.jiang@linux.dev Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com> Link: https://lore.kernel.org/r/20220128031002.2219155-3-baolu.lu@linux.intel.com Signed-off-by: Joerg Roedel <jroedel@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Peter Ujfalusi authored
commit 1c7f0e34 upstream. If the codec->registered is not set then it means that pm_runtime is not yet enabled and the codec->pcm_list_head has not been initialized. The access to the not initialized pcm_list_head will lead a kernel crash during shutdown. Reported-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com> Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com> Tested-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com> Fixes: b98444ed ("ALSA: hda: Suspend codec at shutdown") Link: https://lore.kernel.org/r/20220201112144.29411-1-peter.ujfalusi@linux.intel.com Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Takashi Iwai authored
commit 0444f827 upstream. The %x format of sscanf() takes an unsigned int pointer, while we pass a signed int pointer. Practically it's OK, but this may result in a compile warning. Let's fix it. Fixes: a235d5b8 ("ALSA: hda: Allow model option to specify PCI SSID alias") Reported-by: kernel test robot <lkp@intel.com> Link: https://lore.kernel.org/r/20220127135717.31751-1-tiwai@suse.de Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Tom Rix authored
commit 3da4b740 upstream. clang static analysis reports this representative issue mixer.c:1548:35: warning: Assigned value is garbage or undefined ucontrol->value.integer.value[0] = val; ^ ~~~ The filter_error() macro allows errors to be ignored. If errors can be ignored, initialize variables so garbage will not be used. Fixes: 48cc4297 ("ALSA: usb-audio: Filter error from connector kctl ops, too") Signed-off-by: Tom Rix <trix@redhat.com> Link: https://lore.kernel.org/r/20220126182142.1184819-1-trix@redhat.com Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Leon Romanovsky authored
commit f3136c4c upstream. The failure to allocate memory during MLX4_DEV_EVENT_PORT_MGMT_CHANGE event handler will cause skip the assignment logic, but ib_dispatch_event() will be called anyway. Fix it by calling to return instead of break after memory allocation failure. Fixes: 00f5ce99 ("mlx4: Use port management change event instead of smp_snoop") Link: https://lore.kernel.org/r/12a0e83f18cfad4b5f62654f141e240d04915e10.1643622264.git.leonro@nvidia.com Signed-off-by: Leon Romanovsky <leonro@nvidia.com> Reviewed-by: Håkon Bugge <haakon.bugge@oracle.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Bernard Metzler authored
commit b43a76f4 upstream. Code unconditionally resumed fenced SQ processing after next RDMA Read completion, even if other RDMA Read responses are still outstanding, or ORQ is full. Also adds comments for better readability of fence processing, and removes orq_get_tail() helper, which is not needed anymore. Fixes: 8b6a361b ("rdma/siw: receive path") Fixes: a5319752 ("rdma/siw: main include file") Link: https://lore.kernel.org/r/20220130170815.1940-1-bmt@zurich.ibm.com Reported-by: Jared Holzman <jared.holzman@excelero.com> Signed-off-by: Bernard Metzler <bmt@zurich.ibm.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Mike Marciniszyn authored
commit 4028bccb upstream. The rdma-core test suite sends an unaligned remote address and expects a failure. ERROR: test_atomic_non_aligned_addr (tests.test_atomic.AtomicTest) The qib/hfi1 rc handling validates properly, but the test has the client and server on the same system. The loopback of these operations is a distinct code path. Fix by syntaxing the proposed remote address in the loopback code path. Fixes: 15703461 ("IB/{hfi1, qib, rdmavt}: Move ruc_loopback to rdmavt") Link: https://lore.kernel.org/r/1642584489-141005-1-git-send-email-mike.marciniszyn@cornelisnetworks.com Reviewed-by: Dennis Dalessandro <dennis.dalessandro@cornelisnetworks.com> Signed-off-by: Mike Marciniszyn <mike.marciniszyn@cornelisnetworks.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Dan Carpenter authored
commit a75badeb upstream. The atomic_inc() needs to be paired with an atomic_dec() on the error path. Fixes: 514aee66 ("RDMA: Globally allocate and release QP memory") Link: https://lore.kernel.org/r/20220118091104.GA11671@kili Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Leon Romanovsky <leonro@nvidia.com> Reviewed-by: Bernard Metzler <bmt@zurich.ibm.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Leon Romanovsky authored
commit 36e8169e upstream. Partially revert the commit mentioned in the Fixes line to make sure that allocation and erasing multicast struct are locked. BUG: KASAN: use-after-free in ucma_cleanup_multicast drivers/infiniband/core/ucma.c:491 [inline] BUG: KASAN: use-after-free in ucma_destroy_private_ctx+0x914/0xb70 drivers/infiniband/core/ucma.c:579 Read of size 8 at addr ffff88801bb74b00 by task syz-executor.1/25529 CPU: 0 PID: 25529 Comm: syz-executor.1 Not tainted 5.16.0-rc7-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0xcd/0x134 lib/dump_stack.c:106 print_address_description.constprop.0.cold+0x8d/0x320 mm/kasan/report.c:247 __kasan_report mm/kasan/report.c:433 [inline] kasan_report.cold+0x83/0xdf mm/kasan/report.c:450 ucma_cleanup_multicast drivers/infiniband/core/ucma.c:491 [inline] ucma_destroy_private_ctx+0x914/0xb70 drivers/infiniband/core/ucma.c:579 ucma_destroy_id+0x1e6/0x280 drivers/infiniband/core/ucma.c:614 ucma_write+0x25c/0x350 drivers/infiniband/core/ucma.c:1732 vfs_write+0x28e/0xae0 fs/read_write.c:588 ksys_write+0x1ee/0x250 fs/read_write.c:643 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x44/0xae Currently the xarray search can touch a concurrently freeing mc as the xa_for_each() is not surrounded by any lock. Rather than hold the lock for a full scan hold it only for the effected items, which is usually an empty list. Fixes: 95fe5109 ("RDMA/ucma: Remove mc_list and rely on xarray") Link: https://lore.kernel.org/r/1cda5fabb1081e8d16e39a48d3a4f8160cea88b8.1642491047.git.leonro@nvidia.com Reported-by: <syzbot+e3f96c43d19782dd14a7@syzkaller.appspotmail.com> Suggested-by: Jason Gunthorpe <jgg@nvidia.com> Reviewed-by: Maor Gottlieb <maorg@nvidia.com> Signed-off-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-