- Jan 10, 2011
-
-
Jesse Gross authored
netif_get_vlan_features() is currently only used by netif_needs_gso(), so it only concerns itself with GSO features. However, several other places also should take into account the contents of the packet when deciding whether to offload to hardware. This generalizes the function to return features about all of the various forms of offloading. Since offloads tend to be linked together, this avoids duplicating the logic in each location (i.e. the scatter/gather code also needs the checksum logic). Suggested-by:
Michał Mirosław <mirqus@gmail.com> Signed-off-by:
Jesse Gross <jesse@nicira.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Jesse Gross authored
We currently only have software fallback for one type of checksum: the TCP/UDP one's complement. This means that a protocol that uses hardware offloading for a different type of checksum (FCoE, SCTP) must directly check the device's features and do the right thing ahead of time. By the time we get to dev_can_checksum(), we're only deciding whether to apply the one algorithm in software or hardware. NETIF_F_HW_CSUM has the same capabilities as the software version, so we should always use it if present. The primary advantage of this is multiply tagged vlans can use hardware checksumming. Signed-off-by:
Jesse Gross <jesse@nicira.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
françois romieu authored
It workarounds the 60s firmware load failure timeout for the non-modular case. Signed-off-by:
Francois Romieu <romieu@fr.zoreil.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Randy Dunlap authored
Fix new kernel-doc notation warning in net/core/filter.c: Warning(net/core/filter.c:172): No description found for parameter 'fentry' Warning(net/core/filter.c:172): Excess function parameter 'filter' description in 'sk_run_filter' Signed-off-by:
Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Randy Dunlap authored
Fix new kernel-doc notation warning in sock.h by annotating skc_dontcopy_* as private fields. Warning(include/net/sock.h:163): No description found for parameter 'skc_dontcopy_end[0]' Signed-off-by:
Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Jan Engelhardt authored
Due to NLM_F_DUMP is composed of two bits, NLM_F_ROOT | NLM_F_MATCH, when doing "if (x & NLM_F_DUMP)", it tests for _either_ of the bits being set. Because NLM_F_MATCH's value overlaps with NLM_F_EXCL, non-dump requests with NLM_F_EXCL set are mistaken as dump requests. Substitute the condition to test for _all_ bits being set. Signed-off-by:
Jan Engelhardt <jengelh@medozas.de> Acked-by:
Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Rafael J. Wysocki authored
The forcedeth driver uses the legacy PCI power management, so it has to do PCI-specific things in its ->suspend() and ->resume() callbacks and some of them are not done correctly. Convert forcedeth to the new PCI power management framework and make it let the PCI subsystem take care of all the PCI-specific aspects of device handling during system power transitions. Tested with nVidia Corporation MCP55 Ethernet (rev a2). Signed-off-by:
Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
-
Stephen Hemminger authored
This converts sky2 to new VLAN offload flags control via ethtool. It also allows for transmit offload of vlan tagged frames which was not possible before. Signed-off-by:
Stephen Hemminger <shemminger@vyatta.com> Reviewed-by:
Jesse Gross <jesse@nicira.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Stephen Hemminger authored
The sky2 driver would always try all possible supported speeds even if the user only asked for a limited set of speed/duplex combinations. Reported-by:
Mohsen Hariri <m.hariri@gmail.com> Signed-off-by:
Stephen Hemminger <shemminger@vyatta.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Vladislav Zolotarov authored
Fix the race on bp->stats_pending between the timer and a LINK_UP event handler. Signed-off-by:
Vladislav Zolotarov <vladz@broadcom.com> Signed-off-by:
Eilon Greenstein <eilong@broadcom.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Vladislav Zolotarov authored
Move to D0 before clearing MSI/MSI-X configuration. Otherwise MSI/MSI-X won't be cleared. Signed-off-by:
Vladislav Zolotarov <vladz@broadcom.com> Signed-off-by:
Eilon Greenstein <eilong@broadcom.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Vladislav Zolotarov authored
Fixes in registers dump: - Properly calculate dump length for 57712. - Prevent HW blocks parity attentions when dumping registers in order to prevent false parity errors handling. - Update the bnx2x_dump.h file: old one had a few bugs that could cause fatal HW error as a result of a registers dump. Signed-off-by:
Vladislav Zolotarov <vladz@broadcom.com> Signed-off-by:
Eilon Greenstein <eilong@broadcom.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Vladislav Zolotarov authored
Don't prevent RSS configuration in INT#x and MSI interrupt modes. Otherwise Rx hash key won't be available. Signed-off-by:
Vladislav Zolotarov <vladz@broadcom.com> Signed-off-by:
Eilon Greenstein <eilong@broadcom.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Jesper Juhl authored
Madge Ambassador ATM Adapter driver: Always release_firmware() in ucode_init() and don't leak memory. Failure to call release_firmware() will result in memory leak in drivers/atm/ambassador.c::ucode_init(). This patch makes sure we always call release_firmware() when needed, thus removing the leak(s). Yes, I know checkpatch complains about this patch, but it was either that or completely mess up the existing style, so I opted to use the existing style and live with the checkpatch related flak. Signed-off-by:
Jesper Juhl <jj@chaosbits.net> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Jesper Juhl authored
Failure to release_firmware() in drivers/net/hamradio/yam.c::add_mcs() causes memory leak. This patch should fix it. Signed-off-by:
Jesper Juhl <jj@chaosbits.net> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Shawn Guo authored
This patch is to add mx28 dual fec support. Here are some key notes for mx28 fec controller. - The mx28 fec controller naming ENET-MAC is a different IP from FEC used on other i.mx variants. But they are basically compatible on software interface, so it's possible to share the same driver. - ENET-MAC design on mx28 made an improper assumption that it runs on a big-endian system. As the result, driver has to swap every frame going to and coming from the controller. - The external phys can only be configured by fec0, which means fec1 can not work independently and both phys need to be configured by mii_bus attached on fec0. - ENET-MAC reset will get mac address registers reset too. - ENET-MAC MII/RMII mode and 10M/100M speed are configured differently FEC. - ETHER_EN bit must be set to get ENET-MAC interrupt work. Signed-off-by:
Shawn Guo <shawn.guo@freescale.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Shawn Guo authored
The following commit made a fix to use fec_enet_open/fec_enet_close over fec_enet_init/fec_stop for suspend/resume, because fec_enet_init does not allow to have a working network interface at resume. e3fe8558 net/fec: fix pm to survive to suspend/resume This fix works for i.mx/mxc fec controller, but fails on mx28 fec which gets a different interrupt logic design. On i.mx fec, interrupt can be triggered even bit ETHER_EN of ECR register is not set. But on mx28 fec, ETHER_EN must be set to get interrupt work. Meanwhile, MII interrupt is mandatory to resume the driver, because MDIO read/write changed to interrupt mode by commit below. 97b72e43 fec: use interrupt for MDIO completion indication fec_restart/fec_stop comes out as the solution working for both cases. Signed-off-by:
Shawn Guo <shawn.guo@freescale.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Shawn Guo authored
Add mac field into fec_platform_data and consolidate function fec_get_mac to get mac address in following order. 1) module parameter via kernel command line fec.macaddr=0x00,0x04,... 2) from flash in case of CONFIG_M5272 or fec_platform_data mac field for others, which typically have mac stored in fuse 3) fec mac address registers set by bootloader Signed-off-by:
Shawn Guo <shawn.guo@freescale.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Shawn Guo authored
The "index" becomes legacy since fep->pdev->id starts working to identify the instance. Moreover, the call of fec_enet_init(ndev, 0) always passes 0 to fep->index. This makes the following code in fec_get_mac buggy. /* Adjust MAC if using default MAC address */ if (iap == fec_mac_default) dev->dev_addr[ETH_ALEN-1] = fec_mac_default[ETH_ALEN-1] + fep->index; It may be the time to remove "index" and use fep->pdev->id instead. Signed-off-by:
Shawn Guo <shawn.guo@freescale.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Shawn Guo authored
FEC_MMFR_OP_WRITE should be used than FEC_MMFR_OP_READ in a mdio write operation. It's probably a typo introduced by commit: e6b043d5 netdev/fec.c: add phylib supporting to enable carrier detection (v2) Signed-off-by:
Shawn Guo <shawn.guo@freescale.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
- Jan 08, 2011
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/hch/hfsplusLinus Torvalds authored
* 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/hch/hfsplus: hfsplus: %L-to-%ll, macro correction, and remove unneeded braces hfsplus: spaces/indentation clean-up hfsplus: C99 comments clean-up hfsplus: over 80 character lines clean-up hfsplus: fix an artifact in ioctl flag checking hfsplus: flush disk caches in sync and fsync hfsplus: optimize fsync hfsplus: split up inode flags hfsplus: write up fsync for directories hfsplus: simplify fsync hfsplus: avoid useless work in hfsplus_sync_fs hfsplus: make sure sync writes out all metadata hfsplus: use raw bio access for partition tables hfsplus: use raw bio access for the volume headers hfsplus: always use hfsplus_sync_fs to write the volume header hfsplus: silence a few debug printks hfsplus: fix option parsing during remount Fix up conflicts due to VFS changes in fs/hfsplus/{hfsplus_fs.h,unicode.c}
-
git://git.secretlab.ca/git/linux-2.6Linus Torvalds authored
* 'next-spi' of git://git.secretlab.ca/git/linux-2.6: (77 commits) spi/omap: Fix DMA API usage in OMAP MCSPI driver spi/imx: correct the test on platform_get_irq() return value spi/topcliff: Typo fix threhold to threshold spi/dw_spi Typo change diable to disable. spi/fsl_espi: change the read behaviour of the SPIRF spi/mpc52xx-psc-spi: move probe/remove to proper sections spi/dw_spi: add DMA support spi/dw_spi: change to EXPORT_SYMBOL_GPL for exported APIs spi/dw_spi: Fix too short timeout in spi polling loop spi/pl022: convert running variable spi/pl022: convert busy flag to a bool spi/pl022: pass the returned sglen to the DMA engine spi/pl022: map the buffers on the DMA engine spi/topcliff_pch: Fix data transfer issue spi/imx: remove autodetection spi/pxa2xx: pass of_node to spi device and set a parent device spi/pxa2xx: Modify RX-Tresh instead of busy-loop for the remaining RX bytes. spi/pxa2xx: Add chipselect support for Sodaville spi/pxa2xx: Consider CE4100's FIFO depth spi/pxa2xx: Add CE4100 support ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/tj/percpuLinus Torvalds authored
* 'for-2.6.38' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/percpu: (30 commits) gameport: use this_cpu_read instead of lookup x86: udelay: Use this_cpu_read to avoid address calculation x86: Use this_cpu_inc_return for nmi counter x86: Replace uses of current_cpu_data with this_cpu ops x86: Use this_cpu_ops to optimize code vmstat: User per cpu atomics to avoid interrupt disable / enable irq_work: Use per cpu atomics instead of regular atomics cpuops: Use cmpxchg for xchg to avoid lock semantics x86: this_cpu_cmpxchg and this_cpu_xchg operations percpu: Generic this_cpu_cmpxchg() and this_cpu_xchg support percpu,x86: relocate this_cpu_add_return() and friends connector: Use this_cpu operations xen: Use this_cpu_inc_return taskstats: Use this_cpu_ops random: Use this_cpu_inc_return fs: Use this_cpu_inc_return in buffer.c highmem: Use this_cpu_xx_return() operations vmstat: Use this_cpu_inc_return for vm statistics x86: Support for this_cpu_add, sub, dec, inc_return percpu: Generic support for this_cpu_add, sub, dec, inc_return ... Fixed up conflicts: in arch/x86/kernel/{apic/nmi.c, apic/x2apic_uv_x.c, process.c} as per Tejun.
-
git://git.kernel.org/pub/scm/linux/kernel/git/tj/wqLinus Torvalds authored
* 'for-2.6.38' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq: (33 commits) usb: don't use flush_scheduled_work() speedtch: don't abuse struct delayed_work media/video: don't use flush_scheduled_work() media/video: explicitly flush request_module work ioc4: use static work_struct for ioc4_load_modules() init: don't call flush_scheduled_work() from do_initcalls() s390: don't use flush_scheduled_work() rtc: don't use flush_scheduled_work() mmc: update workqueue usages mfd: update workqueue usages dvb: don't use flush_scheduled_work() leds-wm8350: don't use flush_scheduled_work() mISDN: don't use flush_scheduled_work() macintosh/ams: don't use flush_scheduled_work() vmwgfx: don't use flush_scheduled_work() tpm: don't use flush_scheduled_work() sonypi: don't use flush_scheduled_work() hvsi: don't use flush_scheduled_work() xen: don't use flush_scheduled_work() gdrom: don't use flush_scheduled_work() ... Fixed up trivial conflict in drivers/media/video/bt8xx/bttv-input.c as per Tejun.
-
Linus Torvalds authored
Merge branch 'sched-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'sched-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: sched: Constify function scope static struct sched_param usage sched: Fix strncmp operation sched: Move sched_autogroup_exit() to free_signal_struct() sched: Fix struct autogroup memory leak sched: Mark autogroup_init() __init sched: Consolidate the name of root_task_group and init_task_group
-
Linus Torvalds authored
Merge branch 'x86-apic-cleanups-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'x86-apic-cleanups-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: x86: apic: Cleanup and simplify setup_local_APIC() x86: Further simplify mp_irq info handling x86: Unify 3 similar ways of saving mp_irqs info x86, ioapic: Avoid writing io_apic id if already correct x86, x2apic: Don't map lapic addr for preenabled x2apic systems x86, sfi: Use register_lapic_address() x86, apic: Use register_lapic_address() in init_apic_mapping() x86, apic: Remove early_init_lapic_mapping() x86, apic: Unify identical register_lapic_address() functions
-
git://git.kernel.org/pub/scm/linux/kernel/git/bp/bpLinus Torvalds authored
* 'mce-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp: EDAC, MCE: Fix NB error formatting EDAC, MCE: Use BIT_64() to eliminate warnings on 32-bit EDAC, MCE: Enable MCE decoding on F15h EDAC, MCE: Allow F15h bank 6 MCE injection EDAC, MCE: Shorten error report formatting EDAC, MCE: Overhaul error fields extraction macros EDAC, MCE: Add F15h FP MCE decoder EDAC, MCE: Add F15 EX MCE decoder EDAC, MCE: Add an F15h NB MCE decoder EDAC, MCE: No F15h LS MCE decoder EDAC, MCE: Add F15h CU MCE decoder EDAC, MCE: Add F15h IC MCE decoder EDAC, MCE: Add F15h DC MCE decoder EDAC, MCE: Select extended error code mask
-
git://git.kernel.org/pub/scm/linux/kernel/git/bp/bpLinus Torvalds authored
* 'edac-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp: amd64_edac: Disable DRAM ECC injection on K8 EDAC: Fixup scrubrate manipulation amd64_edac: Remove two-stage initialization amd64_edac: Check ECC capabilities initially amd64_edac: Carve out ECC-related hw settings amd64_edac: Remove PCI ECS enabling functions amd64_edac: Remove explicit Kconfig PCI dependency amd64_edac: Allocate driver instances dynamically amd64_edac: Rework printk macros amd64_edac: Rename CPU PCI devices amd64_edac: Concentrate per-family init even more amd64_edac: Cleanup the CPU PCI device reservation amd64_edac: Simplify CPU family detection amd64_edac: Add per-family init function amd64_edac: Use cached extended CPU model amd64_edac: Remove F11h support
-
git://git390.marist.edu/pub/scm/linux-2.6Linus Torvalds authored
* 'for-linus' of git://git390.marist.edu/pub/scm/linux-2.6: (65 commits) [S390] prevent unneccesary loops_per_jiffy recalculation [S390] cpuinfo: use get_online_cpus() instead of preempt_disable() [S390] smp: remove cpu hotplug messages [S390] mutex: enable spinning mutex on s390 [S390] mutex: Introduce arch_mutex_cpu_relax() [S390] cio: fix ccwgroup unregistration race condition [S390] perf: add DWARF register lookup for s390 [S390] cleanup ftrace backend functions [S390] ptrace cleanup [S390] smp/idle: call init_idle() before starting a new cpu [S390] smp: delay idle task creation [S390] dasd: Correct retry counter for terminated I/O. [S390] dasd: Add support for raw ECKD access. [S390] dasd: Prevent deadlock during suspend/resume. [S390] dasd: Improve handling of stolen DASD reservation [S390] dasd: do path verification for paths added at runtime [S390] dasd: add High Performance FICON multitrack support [S390] cio: reduce memory consumption of itcw structures [S390] nmi: enable machine checks early [S390] qeth: buffer count imbalance ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6Linus Torvalds authored
* 'rmobile-latest' of git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6: (67 commits) ARM: mach-shmobile: update for SMP changes. ARM: mach-shmobile: update for GIC changes. ARM: mach-shmobile: Fix up clkdev fallout for SH73A0. dma: shdma: don't register the global die notifier multiple times ARM: mach-shmobile: Rely on run-time IRQ handlers ARM: mach-shmobile: Run-time IRQ handler for GIC ARM: mach-shmobile: Run-time IRQ handler for INTCA ARM: mach-shmobile: Enable CONFIG_MULTI_IRQ_HANDLER ARM: mach-shmobile: Use shared GIC entry macros ARM: mach-shmobile: mackerel: Add zboot support ARM: mach-shmobile: mackerel: Add HDMI sound support ARM: mach-shmobile: mackerel: add HDMI video support ARM: mach-shmobile: ap4evb: fixup clk_put timing of fsib_clk ARM: mach-shmobile: sh73a0: fix div4 table ARM: mach-shmobile: ap4/mackerel: modify wrong comment out of USB ARM: mach-shmobile: Mackerel VGA camera support mmc: sh_mmcif: make DMA support by the driver unconditional ARM: mach-shmobile: Add eMMC support through MMCIF on AG5EVM ARM: mach-shmobile: Use pullups for AG5EVM KEYSC pins ARM: mach-shmobile: sh73a0 GPIO pullup improvement ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/inputLinus Torvalds authored
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (58 commits) Input: wacom_w8001 - support pen or touch only devices Input: wacom_w8001 - use __set_bit to set keybits Input: bu21013_ts - fix misuse of logical operation in place of bitop Input: i8042 - add Acer Aspire 5100 to the Dritek list Input: wacom - add support for digitizer in Lenovo W700 Input: psmouse - disable the synaptics extension on OLPC machines Input: psmouse - fix up Synaptics comment Input: synaptics - ignore bogus mt packet Input: synaptics - add multi-finger and semi-mt support Input: synaptics - report clickpad property input: mt: Document interface updates Input: fix double equality sign in uevent Input: introduce device properties hid: egalax: Add support for Wetab (726b) Input: include MT library as source for kerneldoc MAINTAINERS: Update input-mt entry hid: egalax: Add support for Samsung NB30 netbook hid: egalax: Document the new devices in Kconfig hid: egalax: Add support for Wetab hid: egalax: Convert to MT slots ... Fixed up trivial conflict in drivers/input/keyboard/Kconfig
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty-2.6Linus Torvalds authored
* 'tty-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty-2.6: (36 commits) serial: apbuart: Fixup apbuart_console_init() TTY: Add tty ioctl to figure device node of the system console. tty: add 'active' sysfs attribute to tty0 and console device drivers: serial: apbuart: Handle OF failures gracefully Serial: Avoid unbalanced IRQ wake disable during resume tty: fix typos/errors in tty_driver.h comments pch_uart : fix warnings for 64bit compile 8250: fix uninitialized FIFOs ip2: fix compiler warning on ip2main_pci_tbl specialix: fix compiler warning on specialix_pci_tbl rocket: fix compiler warning on rocket_pci_ids 8250: add a UPIO_DWAPB32 for 32 bit accesses 8250: use container_of() instead of casting serial: omap-serial: Add support for kernel debugger serial: fix pch_uart kconfig & build drivers: char: hvc: add arm JTAG DCC console support RS485 documentation: add 16C950 UART description serial: ifx6x60: fix memory leak serial: ifx6x60: free IRQ on error Serial: EG20T: add PCH_UART driver ... Fixed up conflicts in drivers/serial/apbuart.c with evil merge that makes the code look fairly sane (unlike either side).
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6Linus Torvalds authored
* 'usb-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6: (144 commits) USB: add support for Dream Cheeky DL100B Webmail Notifier (1d34:0004) USB: serial: ftdi_sio: add support for TIOCSERGETLSR USB: ehci-mxc: Setup portsc register prior to accessing OTG viewport USB: atmel_usba_udc: fix freeing irq in usba_udc_remove() usb: ehci-omap: fix tll channel enable mask usb: ohci-omap3: fix trivial typo USB: gadget: ci13xxx: don't assume that PAGE_SIZE is 4096 USB: gadget: ci13xxx: fix complete() callback for no_interrupt rq's USB: gadget: update ci13xxx to work with g_ether USB: gadgets: ci13xxx: fix probing of compiled-in gadget drivers Revert "USB: musb: pm: don't rely fully on clock support" Revert "USB: musb: blackfin: pm: make it work" USB: uas: Use GFP_NOIO instead of GFP_KERNEL in I/O submission path USB: uas: Ensure we only bind to a UAS interface USB: uas: Rename sense pipe and sense urb to status pipe and status urb USB: uas: Use kzalloc instead of kmalloc USB: uas: Fix up the Sense IU usb: musb: core: kill unneeded #include's DA8xx: assign name to MUSB IRQ resource usb: gadget: g_ncm added ... Manually fix up trivial conflicts in USB Kconfig changes in: arch/arm/mach-omap2/Kconfig arch/sh/Kconfig drivers/usb/Kconfig drivers/usb/host/ehci-hcd.c and annoying chip clock data conflicts in: arch/arm/mach-omap2/clock3xxx_data.c arch/arm/mach-omap2/clock44xx_data.c
-
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6Linus Torvalds authored
* git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6: (147 commits) [SCSI] arcmsr: fix write to device check [SCSI] lpfc: lower stack use in lpfc_fc_frame_check [SCSI] eliminate an unnecessary local variable from scsi_remove_target() [SCSI] libiscsi: use bh locking instead of irq with session lock [SCSI] libiscsi: do not take host lock in queuecommand [SCSI] be2iscsi: fix null ptr when accessing task hdr [SCSI] be2iscsi: fix gfp use in alloc_pdu [SCSI] libiscsi: add more informative failure message during iscsi scsi eh [SCSI] gdth: Add missing call to gdth_ioctl_free [SCSI] bfa: remove unused defintions and misc cleanups [SCSI] bfa: remove inactive functions [SCSI] bfa: replace bfa_assert with WARN_ON [SCSI] qla2xxx: Use sg_next to fetch next sg element while walking sg list. [SCSI] qla2xxx: Fix to avoid recursive lock failure during BSG timeout. [SCSI] qla2xxx: Remove code to not reset ISP82xx on failure. [SCSI] qla2xxx: Display mailbox register 4 during 8012 AEN for ISP82XX parts. [SCSI] qla2xxx: Don't perform a BIG_HAMMER if Get-ID (0x20) mailbox command fails on CNAs. [SCSI] qla2xxx: Remove redundant module parameter permission bits [SCSI] qla2xxx: Add sysfs node for displaying board temperature. [SCSI] qla2xxx: Code cleanup to remove unwanted comments and code. ...
-
Dan Carpenter authored
There was a semi-colon missing and it broke the compile. Signed-off-by:
Dan Carpenter <error27@gmail.com> Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by:
Linus Walleij <linus.walleij@stericsson.com> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Russell King - ARM Linux authored
Running the latest kernel on the 4430SDP board with DMA API debugging enabled results in this: WARNING: at lib/dma-debug.c:803 check_unmap+0x19c/0x6f0() NULL NULL: DMA-API: device driver tries to free DMA memory it has not allocated [device address=0x000000008129901a] [size=260 bytes] Modules linked in: Backtrace: [<c003cbe0>] (dump_backtrace+0x0/0x10c) from [<c0278da8>] (dump_stack+0x18/0x1c) r7:c1839dc0 r6:c0198578 r5:c0304b17 r4:00000323 [<c0278d90>] (dump_stack+0x0/0x1c) from [<c005b158>] (warn_slowpath_common+0x58/0x70) [<c005b100>] (warn_slowpath_common+0x0/0x70) from [<c005b214>] (warn_slowpath_fmt+0x38/0x40) r8:c1839e40 r7:00000000 r6:00000104 r5:00000000 r4:8129901a [<c005b1dc>] (warn_slowpath_fmt+0x0/0x40) from [<c0198578>] (check_unmap+0x19c/0x6f0) r3:c03110de r2:c0304e6b [<c01983dc>] (check_unmap+0x0/0x6f0) from [<c0198cd8>] (debug_dma_unmap_page+0x74/0x80) [<c0198c64>] (debug_dma_unmap_page+0x0/0x80) from [<c01d5ad8>] (omap2_mcspi_work+0x514/0xbf0) [<c01d55c4>] (omap2_mcspi_work+0x0/0xbf0) from [<c006dfb0>] (process_one_work+0x294/0x400) [<c006dd1c>] (process_one_work+0x0/0x400) from [<c006e50c>] (worker_thread+0x220/0x3f8) [<c006e2ec>] (worker_thread+0x0/0x3f8) from [<c00738d0>] (kthread+0x88/0x90) [<c0073848>] (kthread+0x0/0x90) from [<c005e924>] (do_exit+0x0/0x5fc) r7:00000013 r6:c005e924 r5:c0073848 r4:c1829ee0 ---[ end trace 1b75b31a2719ed20 ]--- I've no idea why this driver uses NULL for dma_unmap_single instead of the &spi->dev that is laying around just waiting to be used in that function - but it's an easy fix. Also replace this comment with a FIXME comment: /* Do DMA mapping "early" for better error reporting and * dcache use. Note that if dma_unmap_single() ever starts * to do real work on ARM, we'd need to clean up mappings * for previous transfers on *ALL* exits of this loop... */ as the comment is not true - we do work in dma_unmap() functions, particularly on ARMv6 and above. I've corrected the existing unmap functions but if any others are required they must be added ASAP. Signed-off-by:
Russell King <rmk+kernel@arm.linux.org.uk> Acked-by:
Tony Lindgren <tony@atomide.com> Signed-off-by:
Grant Likely <grant.likely@secretlab.ca>
-
Richard Genoud authored
The test "if (spi_imx->irq <= 0)" is not testing the IRQ value, but the return value of platform_get_irq(). As platform_get_irq() can return an error (-ENXIO) or the IRQ value it found, the test should be "if (spi_imx->irq < 0)" [grant.likely: Note: In general, Linux irq number 0 should also mean no irq, but arm still allows devices to be assigned 0, and the imx platform uses 0 for one of the spi devices, so this patch is needed for the device to work] Signed-off-by:
Richard Genoud <richard.genoud@gmail.com> Signed-off-by:
Grant Likely <grant.likely@secretlab.ca>
-
Linus Torvalds authored
Merge branch 'vfs-scale-working' of git://git.kernel.org/pub/scm/linux/kernel/git/npiggin/linux-npiggin * 'vfs-scale-working' of git://git.kernel.org/pub/scm/linux/kernel/git/npiggin/linux-npiggin: (57 commits) fs: scale mntget/mntput fs: rename vfsmount counter helpers fs: implement faster dentry memcmp fs: prefetch inode data in dcache lookup fs: improve scalability of pseudo filesystems fs: dcache per-inode inode alias locking fs: dcache per-bucket dcache hash locking bit_spinlock: add required includes kernel: add bl_list xfs: provide simple rcu-walk ACL implementation btrfs: provide simple rcu-walk ACL implementation ext2,3,4: provide simple rcu-walk ACL implementation fs: provide simple rcu-walk generic_check_acl implementation fs: provide rcu-walk aware permission i_ops fs: rcu-walk aware d_revalidate method fs: cache optimise dentry and inode for rcu-walk fs: dcache reduce branches in lookup path fs: dcache remove d_mounted fs: fs_struct use seqlock fs: rcu-walk for path lookup ...
-
- Jan 07, 2011
-
-
Peter Zijlstra authored
Function-scope statics are discouraged because they are easily overlooked and can cause subtle bugs/races due to their global (non-SMP safe) nature. Linus noticed that we did this for sched_param - at minimum make the const. Suggested-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
Peter Zijlstra <a.p.zijlstra@chello.nl> LKML-Reference: Message-ID: <AANLkTinotRxScOHEb0HgFgSpGPkq_6jKTv5CfvnQM=ee@mail.gmail.com> Signed-off-by:
Ingo Molnar <mingo@elte.hu>
-