Pull ARM fix from Russell King:
 "Just one fix to the ptrace code, spotted by Simon Marchi, where if a
  thread migrates to a different CPU and the VFP registers are changed
  through ptrace, the application doesn't see the updated VFP registers"

* 'fixes' of git://git.armlinux.org.uk/~rmk/linux-arm:
  ARM: fix PTRACE_SETVFPREGS on SMP systems

Pull arm64 fixes from Will Deacon:
 "The main thing here is reviving hugetlb support using contiguous ptes,
  which we ended up reverting at the last minute in 4.5 pending a fix
  which went into the core mm/ code during the recent merge window.

   - Revert a previous revert and get hugetlb going with contiguous hints
   - Wire up missing compat syscalls
   - Enable CONFIG_SET_MODULE_RONX by default
   - Add missing line to our compat /proc/cpuinfo output
   - Clarify levels in our page table dumps
   - Fix booting with RANDOMIZE_TEXT_OFFSET enabled
   - Misc fixes to the ARM CPU PMU driver (refcounting, probe failure)
   - Remove some dead code and update a comment"

* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
  arm64: fix alignment when RANDOMIZE_TEXT_OFFSET is enabled
  arm64: move {PAGE,CONT}_SHIFT into Kconfig
  arm64: mm: dump: log span level
  arm64: update stale PAGE_OFFSET comment
  drivers/perf: arm_pmu: Avoid leaking pmu->irq_affinity on error
  drivers/perf: arm_pmu: Defer the setting of __oprofile_cpu_pmu
  drivers/perf: arm_pmu: Fix reference count of a device_node in of_pmu_irq_cfg
  arm64: report CPU number in bad_mode
  arm64: unistd32.h: wire up missing syscalls for compat tasks
  arm64: Provide "model name" in /proc/cpuinfo for PER_LINUX32 tasks
  arm64: enable CONFIG_SET_MODULE_RONX by default
  arm64: Remove orphaned __addr_ok() definition
  Revert "arm64: hugetlb: partial revert of 66b3923a"

Pull powerpc fixes from Michael Ellerman:
 - Handle RTAS delay requests in configure_bridge from Russell Currey
 - Refactor the configure_bridge RTAS tokens from Russell Currey
 - Fix definition of SIAR and SDAR registers from Thomas Huth
 - Use privileged SPR number for MMCR2 from Thomas Huth
 - Update LPCR only if it is powernv from Aneesh Kumar K.V
 - Fix the reference bit update when handling hash fault from Aneesh
   Kumar K.V
 - Add missing tlb flush from Aneesh Kumar K.V
 - Add POWER8NVL support to ibm,client-architecture-support call from
   Thomas Huth

* tag 'powerpc-4.7-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
  powerpc/pseries: Add POWER8NVL support to ibm,client-architecture-support call
  powerpc/mm/radix: Add missing tlb flush
  powerpc/mm/hash: Fix the reference bit update when handling hash fault
  powerpc/mm/radix: Update LPCR only if it is powernv
  powerpc: Use privileged SPR number for MMCR2
  powerpc: Fix definition of SIAR and SDAR registers
  powerpc/pseries/eeh: Refactor the configure_bridge RTAS tokens
  powerpc/pseries/eeh: Handle RTAS delay requests in configure_bridge

With ARM64_64K_PAGES and RANDOMIZE_TEXT_OFFSET enabled, we hit the
following issue on the boot:

kernel BUG at arch/arm64/mm/mmu.c:480!
Internal error: Oops - BUG: 0 [#1] PREEMPT SMP
Modules linked in:
CPU: 0 PID: 0 Comm: swapper Not tainted 4.6.0 #310
Hardware name: ARM Juno development board (r2) (DT)
task: ffff000008d58a80 ti: ffff000008d30000 task.ti: ffff000008d30000
PC is at map_kernel_segment+0x44/0xb0
LR is at paging_init+0x84/0x5b0
pc : [<ffff000008c450b4>] lr : [<ffff000008c451a4>] pstate: 600002c5

Call trace:
[<ffff000008c450b4>] map_kernel_segment+0x44/0xb0
[<ffff000008c451a4>] paging_init+0x84/0x5b0
[<ffff000008c42728>] setup_arch+0x198/0x534
[<ffff000008c40848>] start_kernel+0x70/0x388
[<ffff000008c401bc>] __primary_switched+0x30/0x74

Commit 7eb90f2f

 ("arm64: cover the .head.text section in the .text
segment mapping") removed the alignment between the .head.text and .text
sections, and used the _text rather than the _stext interval for mapping
the .text segment.

Prior to this commit _stext was always section aligned and didn't cause
any issue even when RANDOMIZE_TEXT_OFFSET was enabled. Since that
alignment has been removed and _text is used to map the .text segment,
we need ensure _text is always page aligned when RANDOMIZE_TEXT_OFFSET
is enabled.

This patch adds logic to TEXT_OFFSET fuzzing to ensure that the offset
is always aligned to the kernel page size. To ensure this, we rely on
the PAGE_SHIFT being available via Kconfig.

Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Reported-by: Sudeep Holla <sudeep.holla@arm.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Fixes: 7eb90f2f

 ("arm64: cover the .head.text section in the .text segment mapping")
Signed-off-by: Will Deacon <will.deacon@arm.com>

In some cases (e.g. the awk for CONFIG_RANDOMIZE_TEXT_OFFSET) we would
like to make use of PAGE_SHIFT outside of code that can include the
usual header files.

Add a new CONFIG_ARM64_PAGE_SHIFT for this, likewise with
ARM64_CONT_SHIFT for consistency.

Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Sudeep Holla <sudeep.holla@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>

The page table dump code logs spans of entries at the same level
(pgd/pud/pmd/pte) which have the same attributes. While we log the
(decoded) attributes, we don't log the level, which leaves the output
ambiguous and/or confusing in some cases.

For example:

0xffff800800000000-0xffff800980000000           6G       RW NX SHD AF        BLK UXN MEM/NORMAL

If using 4K pages, this may describe a span of 6 1G block entries at the
PGD/PUD level, or 3072 2M block entries at the PMD level.

This patch adds the page table level to each output line, removing this
ambiguity. For the example above, this will produce:

0xffffffc800000000-0xffffffc980000000           6G PUD       RW NX SHD AF        BLK UXN MEM/NORMAL

When 3 level tables are in use, and we use the asm-generic/nopud.h
definitions, the dump code treats each entry in the PGD as a 1 element
table at the PUD level, and logs spans as being PUDs, which can be
confusing. To counteract this, the "PUD" mnemonic is replaced with "PGD"
when CONFIG_PGTABLE_LEVELS <= 3. Likewise for "PMD" when
CONFIG_PGTABLE_LEVELS <= 2.

Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Huang Shijie <shijie.huang@arm.com>
Cc: Laura Abbott <labbott@fedoraproject.org>
Cc: Steve Capper <steve.capper@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>

Commit ab893fb9 ("arm64: introduce KIMAGE_VADDR as the virtual
base of the kernel region") logically split KIMAGE_VADDR from
PAGE_OFFSET, and since commit f9040773

 ("arm64: move kernel
image to base of vmalloc area") the two have been distinct values.

Unfortunately, neither commit updated the comment above these
definitions, which now erroneously states that PAGE_OFFSET is the start
of the kernel image rather than the start of the linear mapping.

This patch fixes said comment, and introduces an explanation of
KIMAGE_VADDR.

Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>

pmu->irq_affinity will not be freed if an error occurred within
arm_pmu_device_probe after of_pmu_irq_cfg has been called.

Note that in the case of_pmu_irq_cfg is returning an error,
pmu->irq_affinity will not be set, but it should be NULL as pmu was
kzalloc'd. Therefore the result kfree(NULL) is benign.

Signed-off-by: Julien Grall <julien.grall@arm.com>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>

The global variable __oprofile_cpu_pmu is set before the PMU is fully
initialized. If an error occurs before the end of the initialization,
the PMU will be freed and the variable will contain an invalid pointer.

This will result in a kernel crash when perf will be used.

Fix it by moving the setting of __oprofile_cpu_pmu when the PMU is fully
initialized (i.e when it is no longer possible to fail).

Cc: <stable@vger.kernel.org>
Signed-off-by: Julien Grall <julien.grall@arm.com>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>

The only function called by of_pmu_irq_cfg that will increment the
reference count on dn is of_parse_phandle.

Each time we successfully parse a possible CPU from an
interrupt-affinity property, we increment the refcount of that CPU node
once via of_parse_handle. After validating the CPU is possible, we
decrement the refcount once. Subsequently, we decrement the refcount
again, either as part of an early break if we don't have a matching SPI,
or as part of the end of the loop body.

This will lead to decrementing twice the refcounnt.
Remove the second pairs of call to of_node_put as nobody is using dn
between the first and second call to of_node_put.

Signed-off-by: Julien Grall <julien.grall@arm.com>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>

If we take an exception we don't expect (e.g. SError), we report this in
the bad_mode handler with pr_crit. Depending on the configured log
level, we may or may not log additional information in functions called
subsequently. Notably, the messages in dump_stack (including the CPU
number) are printed with KERN_DEFAULT and may not appear.

Some exceptions have an IMPLEMENTATION DEFINED ESR_ELx.ISS encoding, and
knowing the CPU number is crucial to correctly decode them. To ensure
that this is always possible, we should log the CPU number along with
the ESR_ELx value, so we are not reliant on subsequent logs or
additional printk configuration options.

This patch logs the CPU number in bad_mode such that it is possible for
a developer to decode these exceptions, provided access to sufficient
documentation.

Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Reported-by: Al Grant <Al.Grant@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Dave Martin <dave.martin@arm.com>
Cc: Robin Murphy <robin.murphy@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>

Pull KVM fixes from Radim Krčmář:
 "ARM:
   - two fixes for 4.6 vgic [Christoffer] (cc stable)

   - six fixes for 4.7 vgic [Marc]

  x86:
   - six fixes from syzkaller reports [Paolo] (two of them cc stable)

   - allow OS X to boot [Dmitry]

   - don't trust compilers [Nadav]"

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
  KVM: x86: fix OOPS after invalid KVM_SET_DEBUGREGS
  KVM: x86: avoid vmalloc(0) in the KVM_SET_CPUID
  KVM: irqfd: fix NULL pointer dereference in kvm_irq_map_gsi
  KVM: fail KVM_SET_VCPU_EVENTS with invalid exception number
  KVM: x86: avoid vmalloc(0) in the KVM_SET_CPUID
  kvm: x86: avoid warning on repeated KVM_SET_TSS_ADDR
  KVM: Handle MSR_IA32_PERF_CTL
  KVM: x86: avoid write-tearing of TDP
  KVM: arm/arm64: vgic-new: Removel harmful BUG_ON
  arm64: KVM: vgic-v3: Relax synchronization when SRE==1
  arm64: KVM: vgic-v3: Prevent the guest from messing with ICC_SRE_EL1
  arm64: KVM: Make ICC_SRE_EL1 access return the configured SRE value
  KVM: arm/arm64: vgic-v3: Always resample level interrupts
  KVM: arm/arm64: vgic-v2: Always resample level interrupts
  KVM: arm/arm64: vgic-v3: Clear all dirty LRs
  KVM: arm/arm64: vgic-v2: Clear all dirty LRs

MOV to DR6 or DR7 causes a #GP if an attempt is made to write a 1 to
any of bits 63:32.  However, this is not detected at KVM_SET_DEBUGREGS
time, and the next KVM_RUN oopses:

   general protection fault: 0000 [#1] SMP
   CPU: 2 PID: 14987 Comm: a.out Not tainted 4.4.9-300.fc23.x86_64 #1
   Hardware name: LENOVO 2325F51/2325F51, BIOS G2ET32WW (1.12 ) 05/30/2012
   [...]
   Call Trace:
    [<ffffffffa072c93d>] kvm_arch_vcpu_ioctl_run+0x141d/0x14e0 [kvm]
    [<ffffffffa071405d>] kvm_vcpu_ioctl+0x33d/0x620 [kvm]
    [<ffffffff81241648>] do_vfs_ioctl+0x298/0x480
    [<ffffffff812418a9>] SyS_ioctl+0x79/0x90
    [<ffffffff817a0f2e>] entry_SYSCALL_64_fastpath+0x12/0x71
   Code: 55 83 ff 07 48 89 e5 77 27 89 ff ff 24 fd 90 87 80 81 0f 23 fe 5d c3 0f 23 c6 5d c3 0f 23 ce 5d c3 0f 23 d6 5d c3 0f 23 de 5d c3 <0f> 23 f6 5d c3 0f 0b 66 66 66 66 66 2e 0f 1f 84 00 00 00 00 00
   RIP  [<ffffffff810639eb>] native_set_debugreg+0x2b/0x40
    RSP <ffff88005836bd50>

Testcase (beautified/reduced from syzkaller output):

    #include <unistd.h>
    #include <sys/syscall.h>
    #include <string.h>
    #include <stdint.h>
    #include <linux/kvm.h>
    #include <fcntl.h>
    #include <sys/ioctl.h>

    long r[8];

    int main()
    {
        struct kvm_debugregs dr = { 0 };

        r[2] = open("/dev/kvm", O_RDONLY);
        r[3] = ioctl(r[2], KVM_CREATE_VM, 0);
        r[4] = ioctl(r[3], KVM_CREATE_VCPU, 7);

        memcpy(&dr,
               "\x5d\x6a\x6b\xe8\x57\x3b\x4b\x7e\xcf\x0d\xa1\x72"
               "\xa3\x4a\x29\x0c\xfc\x6d\x44\x00\xa7\x52\xc7\xd8"
               "\x00\xdb\x89\x9d\x78\xb5\x54\x6b\x6b\x13\x1c\xe9"
               "\x5e\xd3\x0e\x40\x6f\xb4\x66\xf7\x5b\xe3\x36\xcb",
               48);
        r[7] = ioctl(r[4], KVM_SET_DEBUGREGS, &dr);
        r[6] = ioctl(r[4], KVM_RUN, 0);
    }

Reported-by: Dmitry Vyukov <dvyukov@google.com>
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>

This causes an ugly dmesg splat.  Beautified syzkaller testcase:

    #include <unistd.h>
    #include <sys/syscall.h>
    #include <sys/ioctl.h>
    #include <fcntl.h>
    #include <linux/kvm.h>

    long r[8];

    int main()
    {
        struct kvm_irq_routing ir = { 0 };
        r[2] = open("/dev/kvm", O_RDWR);
        r[3] = ioctl(r[2], KVM_CREATE_VM, 0);
        r[4] = ioctl(r[3], KVM_SET_GSI_ROUTING, &ir);
        return 0;
    }

Reported-by: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>

Found by syzkaller:

    BUG: unable to handle kernel NULL pointer dereference at 0000000000000120
    IP: [<ffffffffa0797202>] kvm_irq_map_gsi+0x12/0x90 [kvm]
    PGD 6f80b067 PUD b6535067 PMD 0
    Oops: 0000 [#1] SMP
    CPU: 3 PID: 4988 Comm: a.out Not tainted 4.4.9-300.fc23.x86_64 #1
    [...]
    Call Trace:
     [<ffffffffa0795f62>] irqfd_update+0x32/0xc0 [kvm]
     [<ffffffffa0796c7c>] kvm_irqfd+0x3dc/0x5b0 [kvm]
     [<ffffffffa07943f4>] kvm_vm_ioctl+0x164/0x6f0 [kvm]
     [<ffffffff81241648>] do_vfs_ioctl+0x298/0x480
     [<ffffffff812418a9>] SyS_ioctl+0x79/0x90
     [<ffffffff817a1062>] tracesys_phase2+0x84/0x89
    Code: b5 71 a7 e0 5b 41 5c 41 5d 5d f3 c3 66 66 66 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 55 48 8b 8f 10 2e 00 00 31 c0 48 89 e5 <39> 91 20 01 00 00 76 6a 48 63 d2 48 8b 94 d1 28 01 00 00 48 85
    RIP  [<ffffffffa0797202>] kvm_irq_map_gsi+0x12/0x90 [kvm]
     RSP <ffff8800926cbca8>
    CR2: 0000000000000120

Testcase:

    #include <unistd.h>
    #include <sys/syscall.h>
    #include <string.h>
    #include <stdint.h>
    #include <linux/kvm.h>
    #include <fcntl.h>
    #include <sys/ioctl.h>

    long r[26];

    int main()
    {
        memset(r, -1, sizeof(r));
        r[2] = open("/dev/kvm", 0);
        r[3] = ioctl(r[2], KVM_CREATE_VM, 0);

        struct kvm_irqfd ifd;
        ifd.fd = syscall(SYS_eventfd2, 5, 0);
        ifd.gsi = 3;
        ifd.flags = 2;
        ifd.resamplefd = ifd.fd;
        r[25] = ioctl(r[3], KVM_IRQFD, &ifd);
        return 0;
    }

Reported-by: Dmitry Vyukov <dvyukov@google.com>
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>

This cannot be returned by KVM_GET_VCPU_EVENTS, so it is okay to return
EINVAL.  It causes a WARN from exception_type:

    WARNING: CPU: 3 PID: 16732 at arch/x86/kvm/x86.c:345 exception_type+0x49/0x50 [kvm]()
    CPU: 3 PID: 16732 Comm: a.out Tainted: G        W       4.4.6-300.fc23.x86_64 #1
    Hardware name: LENOVO 2325F51/2325F51, BIOS G2ET32WW (1.12 ) 05/30/2012
     0000000000000286 000000006308a48b ffff8800bec7fcf8 ffffffff813b542e
     0000000000000000 ffffffffa0966496 ffff8800bec7fd30 ffffffff810a40f2
     ffff8800552a8000 0000000000000000 00000000002c267c 0000000000000001
    Call Trace:
     [<ffffffff813b542e>] dump_stack+0x63/0x85
     [<ffffffff810a40f2>] warn_slowpath_common+0x82/0xc0
     [<ffffffff810a423a>] warn_slowpath_null+0x1a/0x20
     [<ffffffffa0924809>] exception_type+0x49/0x50 [kvm]
     [<ffffffffa0934622>] kvm_arch_vcpu_ioctl_run+0x10a2/0x14e0 [kvm]
     [<ffffffffa091c04d>] kvm_vcpu_ioctl+0x33d/0x620 [kvm]
     [<ffffffff81241248>] do_vfs_ioctl+0x298/0x480
     [<ffffffff812414a9>] SyS_ioctl+0x79/0x90
     [<ffffffff817a04ee>] entry_SYSCALL_64_fastpath+0x12/0x71
    ---[ end trace b1a0391266848f50 ]---

Testcase (beautified/reduced from syzkaller output):

    #include <unistd.h>
    #include <sys/syscall.h>
    #include <string.h>
    #include <stdint.h>
    #include <fcntl.h>
    #include <sys/ioctl.h>
    #include <linux/kvm.h>

    long r[31];

    int main()
    {
        memset(r, -1, sizeof(r));
        r[2] = open("/dev/kvm", O_RDONLY);
        r[3] = ioctl(r[2], KVM_CREATE_VM, 0);
        r[7] = ioctl(r[3], KVM_CREATE_VCPU, 0);

        struct kvm_vcpu_events ve = {
                .exception.injected = 1,
                .exception.nr = 0xd4
        };
        r[27] = ioctl(r[7], KVM_SET_VCPU_EVENTS, &ve);
        r[30] = ioctl(r[7], KVM_RUN, 0);
        return 0;
    }

Reported-by: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>

This causes an ugly dmesg splat.  Beautified syzkaller testcase:

    #include <unistd.h>
    #include <sys/syscall.h>
    #include <sys/ioctl.h>
    #include <fcntl.h>
    #include <linux/kvm.h>

    long r[8];

    int main()
    {
        struct kvm_cpuid2 c = { 0 };
        r[2] = open("/dev/kvm", O_RDWR);
        r[3] = ioctl(r[2], KVM_CREATE_VM, 0);
        r[4] = ioctl(r[3], KVM_CREATE_VCPU, 0x8);
        r[7] = ioctl(r[4], KVM_SET_CPUID, &c);
        return 0;
    }

Reported-by: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>

Found by syzkaller:

    WARNING: CPU: 3 PID: 15175 at arch/x86/kvm/x86.c:7705 __x86_set_memory_region+0x1dc/0x1f0 [kvm]()
    CPU: 3 PID: 15175 Comm: a.out Tainted: G        W       4.4.6-300.fc23.x86_64 #1
    Hardware name: LENOVO 2325F51/2325F51, BIOS G2ET32WW (1.12 ) 05/30/2012
     0000000000000286 00000000950899a7 ffff88011ab3fbf0 ffffffff813b542e
     0000000000000000 ffffffffa0966496 ffff88011ab3fc28 ffffffff810a40f2
     00000000000001fd 0000000000003000 ffff88014fc50000 0000000000000000
    Call Trace:
     [<ffffffff813b542e>] dump_stack+0x63/0x85
     [<ffffffff810a40f2>] warn_slowpath_common+0x82/0xc0
     [<ffffffff810a423a>] warn_slowpath_null+0x1a/0x20
     [<ffffffffa09251cc>] __x86_set_memory_region+0x1dc/0x1f0 [kvm]
     [<ffffffffa092521b>] x86_set_memory_region+0x3b/0x60 [kvm]
     [<ffffffffa09bb61c>] vmx_set_tss_addr+0x3c/0x150 [kvm_intel]
     [<ffffffffa092f4d4>] kvm_arch_vm_ioctl+0x654/0xbc0 [kvm]
     [<ffffffffa091d31a>] kvm_vm_ioctl+0x9a/0x6f0 [kvm]
     [<ffffffff81241248>] do_vfs_ioctl+0x298/0x480
     [<ffffffff812414a9>] SyS_ioctl+0x79/0x90
     [<ffffffff817a04ee>] entry_SYSCALL_64_fastpath+0x12/0x71

Testcase:

    #include <unistd.h>
    #include <sys/ioctl.h>
    #include <fcntl.h>
    #include <string.h>
    #include <linux/kvm.h>

    long r[8];

    int main()
    {
        memset(r, -1, sizeof(r));
	r[2] = open("/dev/kvm", O_RDONLY|O_TRUNC);
        r[3] = ioctl(r[2], KVM_CREATE_VM, 0x0ul);
        r[5] = ioctl(r[3], KVM_SET_TSS_ADDR, 0x20000000ul);
        r[7] = ioctl(r[3], KVM_SET_TSS_ADDR, 0x20000000ul);
        return 0;
    }

Reported-by: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>

Intel CPUs having Turbo Boost feature implement an MSR to provide a
control interface via rdmsr/wrmsr instructions. One could detect the
presence of this feature by issuing one of these instructions and
handling the #GP exception which is generated in case the referenced MSR
is not implemented by the CPU.

KVM's vCPU model behaves exactly as a real CPU in this case by injecting
a fault when MSR_IA32_PERF_CTL is called (which KVM does not support).
However, some operating systems use this register during an early boot
stage in which their kernel is not capable of handling #GP correctly,
causing #DP and finally a triple fault effectively resetting the vCPU.

This patch implements a dummy handler for MSR_IA32_PERF_CTL to avoid the
crashes.

Signed-off-by: Dmitry Bilunov <kmeaw@yandex-team.ru>
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>

In theory, nothing prevents the compiler from write-tearing PTEs, or
split PTE writes. These partially-modified PTEs can be fetched by other
cores and cause mayhem. I have not really encountered such case in
real-life, but it does seem possible.

For example, the compiler may try to do something creative for
kvm_set_pte_rmapp() and perform multiple writes to the PTE.

Signed-off-by: Nadav Amit <nadav.amit@gmail.com>
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>

KVM/ARM Fixes for v4.7-rc2

Fixes for the vgic, 2 of the patches address a bug introduced in v4.6
while the rest are for the new vgic.

PTRACE_SETVFPREGS fails to properly mark the VFP register set to be
reloaded, because it undoes one of the effects of vfp_flush_hwstate().

Specifically vfp_flush_hwstate() sets thread->vfpstate.hard.cpu to
an invalid CPU number, but vfp_set() overwrites this with the original
CPU number, thereby rendering the hardware state as apparently "valid",
even though the software state is more recent.

Fix this by reverting the previous change.

Cc: <stable@vger.kernel.org>
Fixes: 8130b9d7

 ("ARM: 7308/1: vfp: flush thread hwstate before copying ptrace registers")
Acked-by: Will Deacon <will.deacon@arm.com>
Tested-by: Simon Marchi <simon.marchi@ericsson.com>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>

When changing the active bit from an MMIO trap, we decide to
explode if the intid is that of a private interrupt.

This flawed logic comes from the fact that we were assuming that
kvm_vcpu_kick() as called by kvm_arm_halt_vcpu() would not return before
the called vcpu responded, but this is not the case, so we need to
perform this wait even for private interrupts.

Dropping the BUG_ON seems like the right thing to do.

 [ Commit message tweaked by Christoffer ]

Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>

Pull pin control fixes from Linus Walleij:
 "Here are three pin control fixes for v4.7.  Not much, and just driver
  fixes:

   - add device tree matches to MAINTAINERS

   - inversion bug in the Nomadik driver

   - dual edge handling bug in the mediatek driver"

* tag 'pinctrl-v4.7-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl:
  pinctrl: mediatek: fix dual-edge code defect
  MAINTAINERS: Add file patterns for pinctrl device tree bindings
  pinctrl: nomadik: fix inversion of gpio direction

Pull dma-buf updates from Sumit Semwal:

 - use of vma_pages instead of explicit computation

 - DocBook and headerdoc updates for dma-buf

* tag 'dma-buf-for-4.7' of git://git.kernel.org/pub/scm/linux/kernel/git/sumits/dma-buf:
  dma-buf: use vma_pages()
  fence: add missing descriptions for fence
  doc: update/fixup dma-buf related DocBook
  reservation: add headerdoc comments
  dma-buf: headerdoc fixes

We're missing entries for mlock2, copy_file_range, preadv2 and pwritev2
in our compat syscall table, so hook them up. Only the last two need
compat wrappers.

Signed-off-by: Will Deacon <will.deacon@arm.com>

Pull networking fixes from David Miller:

 1) Fix negative error code usage in ATM layer, from Stefan Hajnoczi.

 2) If CONFIG_SYSCTL is disabled, the default TTL is not initialized
    properly.  From Ezequiel Garcia.

 3) Missing spinlock init in mvneta driver, from Gregory CLEMENT.

 4) Missing unlocks in hwmb error paths, also from Gregory CLEMENT.

 5) Fix deadlock on team->lock when propagating features, from Ivan
    Vecera.

 6) Work around buffer offset hw bug in alx chips, from Feng Tang.

 7) Fix double listing of SCTP entries in sctp_diag dumps, from Xin
    Long.

 8) Various statistics bug fixes in mlx4 from Eric Dumazet.

 9) Fix some randconfig build errors wrt fou ipv6 from Arnd Bergmann.

10) All of l2tp was namespace aware, but the ipv6 support code was not
    doing so.  From Shmulik Ladkani.

11) Handle on-stack hrtimers properly in pktgen, from Guenter Roeck.

12) Propagate MAC changes properly through VLAN devices, from Mike
    Manning.

13) Fix memory leak in bnx2x_init_one(), from Vitaly Kuznetsov.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (62 commits)
  sfc: Track RPS flow IDs per channel instead of per function
  usbnet: smsc95xx: fix link detection for disabled autonegotiation
  virtio_net: fix virtnet_open and virtnet_probe competing for try_fill_recv
  bnx2x: avoid leaking memory on bnx2x_init_one() failures
  fou: fix IPv6 Kconfig options
  openvswitch: update checksum in {push,pop}_mpls
  sctp: sctp_diag should dump sctp socket type
  net: fec: update dirty_tx even if no skb
  vlan: Propagate MAC address to VLANs
  atm: iphase: off by one in rx_pkt()
  atm: firestream: add more reserved strings
  vxlan: Accept user specified MTU value when create new vxlan link
  net: pktgen: Call destroy_hrtimer_on_stack()
  timer: Export destroy_hrtimer_on_stack()
  net: l2tp: Make l2tp_ip6 namespace aware
  Documentation: ip-sysctl.txt: clarify secure_redirects
  sfc: use flow dissector helpers for aRFS
  ieee802154: fix logic error in ieee802154_llsec_parse_dev_addr
  net: nps_enet: Disable interrupts before napi reschedule
  net/lapb: tuse %*ph to dump buffers
  ...

Pull sparc fixes from David Miller:
 "sparc64 mmu context allocation and trap return bug fixes"

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc:
  sparc64: Fix return from trap window fill crashes.
  sparc: Harden signal return frame checks.
  sparc64: Take ctx_alloc_lock properly in hugetlb_setup().

If we do not provide the PVR for POWER8NVL, a guest on this system
currently ends up in PowerISA 2.06 compatibility mode on KVM, since QEMU
does not provide a generic PowerISA 2.07 mode yet. So some new
instructions from POWER8 (like "mtvsrd") get disabled for the guest,
resulting in crashes when using code compiled explicitly for
POWER8 (e.g. with the "-mcpu=power8" option of GCC).

Fixes: ddee09c0

 ("powerpc: Add PVR for POWER8NVL processor")
Cc: stable@vger.kernel.org # v4.0+
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

This should not have any impact on hash, because hash does tlb
invalidate with every pte update and we don't implement
flush_tlb_* functions for hash. With radix we should make an explicit
call to flush tlb outside pte update.

Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

When we converted the asm routines to C functions, we missed updating
HPTE_R_R based on _PAGE_ACCESSED. ASM code used to copy over the lower
bits from pte via.

andi.	r3,r30,0x1fe		/* Get basic set of flags */

We also update the code such that we won't update the Change bit ('C'
bit) always. This was added by commit c5cf0e30 ("powerpc: Fix
buglet with MMU hash management").

With hash64, we need to make sure that hardware doesn't do a pte update
directly. This is because we do end up with entries in TLB with no hash
page table entry. This happens because when we find a hash bucket full,
we "evict" a more/less random entry from it. When we do that we don't
invalidate the TLB (hpte_remove) because we assume the old translation
is still technically "valid". For more info look at commit
0608d692("powerpc/mm: Always invalidate tlb on hpte invalidate and
update").

Thus it's critical that valid hash PTEs always have reference bit set
and writeable ones have change bit set. We do this by hashing a
non-dirty linux PTE as read-only and always setting _PAGE_ACCESSED (and
thus R) when hashing anything else in. Any attempt by Linux at clearing
those bits also removes the corresponding hash entry.

Commit 5cf0e30bf3d8 did that for 'C' bit by enabling 'C' bit always.
We don't really need to do that because we never map a RW pte entry
without setting 'C' bit. On READ fault on a RW pte entry, we still map
it READ only, hence a store update in the page will still cause a hash
pte fault.

This patch reverts the part of commit c5cf0e30 ("[PATCH] powerpc:
Fix buglet with MMU hash management") and retain the updatepp part.

- If we hit the updatepp path on native, the old code without that
  commit, would fail to set C bcause native_hpte_updatepp()
  was implemented to filter the same bits as H_PROTECT and not let C
  through thus we would "upgrade" a RO HPTE to RW without setting C
  thus causing the bug. So the real fix in that commit was the change
  to native_hpte_updatepp

Fixes: 89ff7250

 ("powerpc/mm: Convert __hash_page_64K to C")
Cc: stable@vger.kernel.org # v4.5+
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

LPCR cannot be updated when running in guest mode.

Fixes: 2bfd65e4

 ("powerpc/mm/radix: Add radix callbacks for early init routines")
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

Otherwise we get confused when two flows on different channels get the
 same flow ID.

Signed-off-by: Edward Cree <ecree@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

To detect link status up/down for connections where autonegotiation is
explicitly disabled, we don't get an irq but need to poll the status
register for link up/down detection.
This patch adds a workqueue to poll for link status.

Signed-off-by: Christoph Fritz <chf.fritz@googlemail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

In function virtnet_open() and virtnet_probe(), func try_fill_recv() may
be executed at the same time. VQ in virtqueue_add() has not been protected
well and BUG_ON will be triggered when virito_net.ko being removed.

Signed-off-by: Yunjian Wang <wangyunjian@huawei.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

bnx2x_init_bp() allocates memory with bnx2x_alloc_mem_bp() so if we
fail later in bnx2x_init_one() we need to free this memory
with bnx2x_free_mem_bp() to avoid leakages. E.g. I'm observing memory
leaks reported by kmemleak when a failure (unrelated) happens in
bnx2x_vfpf_acquire().

Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Acked-by: Yuval Mintz <Yuval.Mintz@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The Kconfig options I added to work around broken compilation ended
up screwing up things more, as I used the wrong symbol to control
compilation of the file, resulting in IPv6 fou support to never be built
into the kernel.

Changing CONFIG_NET_FOU_IPV6_TUNNELS to CONFIG_IPV6_FOU fixes that
problem, I had renamed the symbol in one location but not the other,
and as the file is never being used by other kernel code, this did not
lead to a build failure that I would have caught.

After that fix, another issue with the same patch becomes obvious, as we
'select INET6_TUNNEL', which is related to IPV6_TUNNEL, but not the same,
and this can still cause the original build failure when IPV6_TUNNEL is
not built-in but IPV6_FOU is. The fix is equally trivial, we just need
to select the right symbol.

I have successfully build 350 randconfig kernels with this patch
and verified that the driver is now being built.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reported-by: Valentin Rothberg <valentinrothberg@gmail.com>
Fixes: fabb13db

 ("fou: add Kconfig options for IPv6 support")
Signed-off-by: David S. Miller <davem@davemloft.net>

In the case of CHECKSUM_COMPLETE the skb checksum should be updated in
{push,pop}_mpls() as they the type in the ethernet header.

As suggested by Pravin Shelar.

Cc: Pravin Shelar <pshelar@nicira.com>
Fixes: 25cd9ba0

 ("openvswitch: Add basic MPLS support to kernel")
Signed-off-by: Simon Horman <simon.horman@netronome.com>
Acked-by: Pravin B Shelar <pshelar@ovn.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Now we cannot distinguish that one sk is a udp or sctp style when
we use ss to dump sctp_info. it's necessary to dump it as well.

For sctp_diag, ss support is not officially available, thus there
are no official users of this yet, so we can add this field in the
middle of sctp_info without breaking user API.

v1->v2:
  - move 'sctpi_s_type' field to the end of struct sctp_info, so
    that it won't cause incompatibility with applications already
    built.
  - add __reserved3 in sctp_info to make sure sctp_info is 8-byte
    alignment.

Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

If dirty_tx isn't updated, then dma_unmap_single
can be called twice.

This fixes a
[   58.420980] ------------[ cut here ]------------
[   58.425667] WARNING: CPU: 0 PID: 377 at /home/schurig/d/mkarm/linux-4.5/lib/dma-debug.c:1096 check_unmap+0x9d0/0xab8()
[   58.436405] fec 2188000.ethernet: DMA-API: device driver tries to free DMA memory it has not allocated [device address=0x0000000000000000] [size=66 bytes]

encountered by Holger

Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com>
Tested-by:  <holgerschurig@gmail.com>
Acked-by: Fugang Duan <fugang.duan@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>