- Dec 01, 2021
-
-
Stefano Garzarella authored
commit 49d8c5ff upstream. The "used length" reported by calling vhost_add_used() must be the number of bytes written by the device (using "in" buffers). In vhost_vsock_handle_tx_kick() the device only reads the guest buffers (they are all "out" buffers), without writing anything, so we must pass 0 as "used length" to comply virtio spec. Fixes: 433fc58e ("VSOCK: Introduce vhost_vsock.ko") Cc: stable@vger.kernel.org Reported-by:
Halil Pasic <pasic@linux.ibm.com> Suggested-by:
Jason Wang <jasowang@redhat.com> Signed-off-by:
Stefano Garzarella <sgarzare@redhat.com> Link: https://lore.kernel.org/r/20211122163525.294024-2-sgarzare@redhat.com Signed-off-by:
Michael S. Tsirkin <mst@redhat.com> Reviewed-by:
Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by:
Halil Pasic <pasic@linux.ibm.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Steve French authored
[ Upstream commit 71e6864e ] Linux allows doing a flush/fsync on a file open for read-only, but the protocol does not allow that. If the file passed in on the flush is read-only try to find a writeable handle for the same inode, if that is not possible skip sending the fsync call to the server to avoid breaking the apps. Reported-by:
Julian Sikorski <belegdol@gmail.com> Tested-by:
Julian Sikorski <belegdol@gmail.com> Suggested-by:
Jeremy Allison <jra@samba.org> Reviewed-by:
Paulo Alcantara (SUSE) <pc@cjr.nz> Signed-off-by:
Steve French <stfrench@microsoft.com> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Weichao Guo authored
[ Upstream commit 6663b138 ] Inconsistent node block will cause a file fail to open or read, which could make the user process crashes or stucks. Let's mark SBI_NEED_FSCK flag to trigger a fix at next fsck time. After unlinking the corrupted file, the user process could regenerate a new one and work correctly. Signed-off-by:
Weichao Guo <guoweichao@oppo.com> Reviewed-by:
Chao Yu <chao@kernel.org> Signed-off-by:
Jaegeuk Kim <jaegeuk@kernel.org> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Vladimir Oltean authored
[ Upstream commit c49a35ee ] The driver doesn't support RX timestamping for non-PTP packets, but it declares that it does. Restrict the reported RX filters to PTP v2 over L2 and over L4. Fixes: 4e3b0468 ("net: mscc: PTP Hardware Clock (PHC) support") Signed-off-by:
Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by:
Jakub Kicinski <kuba@kernel.org> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Vladimir Oltean authored
[ Upstream commit 8a075464 ] The ocelot driver, when asked to timestamp all receiving packets, 1588 v1 or NTP, says "nah, here's 1588 v2 for you". According to this discussion: https://patchwork.kernel.org/project/netdevbpf/patch/20211104133204.19757-8-martin.kaistra@linutronix.de/#24577647 drivers that downgrade from a wider request to a narrower response (or even a response where the intersection with the request is empty) are buggy, and should return -ERANGE instead. This patch fixes that. Fixes: 4e3b0468 ("net: mscc: PTP Hardware Clock (PHC) support") Suggested-by:
Richard Cochran <richardcochran@gmail.com> Signed-off-by:
Vladimir Oltean <vladimir.oltean@nxp.com> Acked-by:
Richard Cochran <richardcochran@gmail.com> Signed-off-by:
Jakub Kicinski <kuba@kernel.org> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Guangbin Huang authored
[ Upstream commit 8d2ad993 ] When PF is set to multi-TCs and configured mapping relationship between priorities and TCs, the hardware will active these settings for this PF and its VFs. In this case when VF just uses one TC and its rx packets contain priority, and if the priority is not mapped to TC0, as other TCs of VF is not valid, hardware always put this kind of packets to the queue 0. It cause this kind of packets of VF can not be used RSS function. To fix this problem, set tc mode of all unused TCs of VF to the setting of TC0, then rx packet with priority which map to unused TC will be direct to TC0. Fixes: e2cb1dec ("net: hns3: Add HNS3 VF HCL(Hardware Compatibility Layer) Support") Signed-off-by:
Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by:
Jakub Kicinski <kuba@kernel.org> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Tony Lu authored
[ Upstream commit bacb6c1e ] When applications call shutdown() with SHUT_RDWR in userspace, smc_close_active() calls kernel_sock_shutdown(), and it is called twice in smc_shutdown(). This fixes this by checking sk_state before do clcsock shutdown, and avoids missing the application's call of smc_shutdown(). Link: https://lore.kernel.org/linux-s390/1f67548e-cbf6-0dce-82b5-10288a4583bd@linux.ibm.com/ Fixes: 606a63c9 ("net/smc: Ensure the active closing peer first closes clcsock") Signed-off-by:
Tony Lu <tonylu@linux.alibaba.com> Reviewed-by:
Wen Gu <guwen@linux.alibaba.com> Acked-by:
Karsten Graul <kgraul@linux.ibm.com> Link: https://lore.kernel.org/r/20211126024134.45693-1-tonylu@linux.alibaba.com Signed-off-by:
Jakub Kicinski <kuba@kernel.org> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Ziyang Xuan authored
[ Upstream commit 01d9cc2d ] Inject error before dev_hold(real_dev) in register_vlan_dev(), and execute the following testcase: ip link add dev dummy1 type dummy ip link add name dummy1.100 link dummy1 type vlan id 100 ip link del dev dummy1 When the dummy netdevice is removed, we will get a WARNING as following: ======================================================================= refcount_t: decrement hit 0; leaking memory. WARNING: CPU: 2 PID: 0 at lib/refcount.c:31 refcount_warn_saturate+0xbf/0x1e0 and an endless loop of: ======================================================================= unregister_netdevice: waiting for dummy1 to become free. Usage count = -1073741824 That is because dev_put(real_dev) in vlan_dev_free() be called without dev_hold(real_dev) in register_vlan_dev(). It makes the refcnt of real_dev underflow. Move the dev_hold(real_dev) to vlan_dev_init() which is the call-back of ndo_init(). That makes dev_hold() and dev_put() for vlan's real_dev symmetrical. Fixes: 563bcbae ("net: vlan: fix a UAF in vlan_dev_real_dev()") Reported-by:
Petr Machata <petrm@nvidia.com> Suggested-by:
Jakub Kicinski <kuba@kernel.org> Signed-off-by:
Ziyang Xuan <william.xuanziyang@huawei.com> Link: https://lore.kernel.org/r/20211126015942.2918542-1-william.xuanziyang@huawei.com Signed-off-by:
Jakub Kicinski <kuba@kernel.org> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Huang Pei authored
[ Upstream commit 41ce097f ] It hangup when booting Loongson 3A1000 with BOTH CONFIG_PAGE_SIZE_64KB and CONFIG_MIPS_VA_BITS_48, that it turn out to use 2-level pgtable instead of 3-level. 64KB page size with 2-level pgtable only cover 42 bits VA, use 3-level pgtable to cover all 48 bits VA(55 bits) Fixes: 1e321fa9 ("MIPS64: Support of at least 48 bits of SEGBITS) Signed-off-by:
Huang Pei <huangpei@loongson.cn> Signed-off-by:
Thomas Bogendoerfer <tsbogend@alpha.franken.de> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Jesse Brandeburg authored
[ Upstream commit eaeace60 ] Oleksandr brought a bug report where netpoll causes trace messages in the log on igb. Danielle brought this back up as still occurring, so we'll try again. [22038.710800] ------------[ cut here ]------------ [22038.710801] igb_poll+0x0/0x1440 [igb] exceeded budget in poll [22038.710802] WARNING: CPU: 12 PID: 40362 at net/core/netpoll.c:155 netpoll_poll_dev+0x18a/0x1a0 As Alex suggested, change the driver to return work_done at the exit of napi_poll, which should be safe to do in this driver because it is not polling multiple queues in this single napi context (multiple queues attached to one MSI-X vector). Several other drivers contain the same simple sequence, so I hope this will not create new problems. Fixes: 16eb8815 ("igb: Refactor clean_rx_irq to reduce overhead and improve performance") Reported-by:
Oleksandr Natalenko <oleksandr@natalenko.name> Reported-by:
Danielle Ratson <danieller@nvidia.com> Suggested-by:
Alexander Duyck <alexander.duyck@gmail.com> Signed-off-by:
Jesse Brandeburg <jesse.brandeburg@intel.com> Tested-by:
Oleksandr Natalenko <oleksandr@natalenko.name> Tested-by:
Danielle Ratson <danieller@nvidia.com> Link: https://lore.kernel.org/r/20211123204000.1597971-1-jesse.brandeburg@intel.com Signed-off-by:
Jakub Kicinski <kuba@kernel.org> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Maurizio Lombardi authored
[ Upstream commit c024b226 ] Submit I/O requests with the IOCB_NOWAIT flag set only if the underlying filesystem supports it. Fixes: 50a909db ("nvmet: use IOCB_NOWAIT for file-ns buffered I/O") Signed-off-by:
Maurizio Lombardi <mlombard@redhat.com> Reviewed-by:
Chaitanya Kulkarni <kch@nvidia.com> Signed-off-by:
Christoph Hellwig <hch@lst.de> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Eric Dumazet authored
[ Upstream commit 4e1fddc9 ] While testing BIG TCP patch series, I was expecting that TCP_RR workloads with 80KB requests/answers would send one 80KB TSO packet, then being received as a single GRO packet. It turns out this was not happening, and the root cause was that cubic Hystart ACK train was triggering after a few (2 or 3) rounds of RPC. Hystart was wrongly setting CWND/SSTHRESH to 30, while my RPC needed a budget of ~20 segments. Ideally these TCP_RR flows should not exit slow start. Cubic Hystart should reset itself at each round, instead of assuming every TCP flow is a bulk one. Note that even after this patch, Hystart can still trigger, depending on scheduling artifacts, but at a higher CWND/SSTHRESH threshold, keeping optimal TSO packet sizes. Tested: ip link set dev eth0 gro_ipv6_max_size 131072 gso_ipv6_max_size 131072 nstat -n; netperf -H ... -t TCP_RR -l 5 -- -r 80000,80000 -K cubic; nstat|egrep "Ip6InReceives|Hystart|Ip6OutRequests" Before: 8605 Ip6InReceives 87541 0.0 Ip6OutRequests 129496 0.0 TcpExtTCPHystartTrainDetect 1 0.0 TcpExtTCPHystartTrainCwnd 30 0.0 After: 8760 Ip6InReceives 88514 0.0 Ip6OutRequests 87975 0.0 Fixes: ae27e98a ("[TCP] CUBIC v2.3") Co-developed-by:
Neal Cardwell <ncardwell@google.com> Signed-off-by:
Neal Cardwell <ncardwell@google.com> Signed-off-by:
Eric Dumazet <edumazet@google.com> Cc: Stephen Hemminger <stephen@networkplumber.org> Cc: Yuchung Cheng <ycheng@google.com> Cc: Soheil Hassas Yeganeh <soheil@google.com> Link: https://lore.kernel.org/r/20211123202535.1843771-1-eric.dumazet@gmail.com Signed-off-by:
Jakub Kicinski <kuba@kernel.org> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Thomas Zeitlhofer authored
[ Upstream commit cefcf24b ] Commit 39fbef4b ("PM: hibernate: Get block device exclusively in swsusp_check()") changed the opening mode of the block device to (FMODE_READ | FMODE_EXCL). In the corresponding calls to swsusp_close(), the mode is still just FMODE_READ which triggers the warning in blkdev_flush_mapping() on resume from hibernate. So, use the mode (FMODE_READ | FMODE_EXCL) also when closing the device. Fixes: 39fbef4b ("PM: hibernate: Get block device exclusively in swsusp_check()") Signed-off-by:
Thomas Zeitlhofer <thomas.zeitlhofer+lkml@ze-it.at> Signed-off-by:
Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Kumar Thangavel authored
[ Upstream commit ac132852 ] Update NC-SI command handler (both standard and OEM) to take into account of payload paddings in allocating skb (in case of payload size is not 32-bit aligned). The checksum field follows payload field, without taking payload padding into account can cause checksum being truncated, leading to dropped packets. Fixes: fb4ee675 ("net/ncsi: Add NCSI OEM command support") Signed-off-by:
Kumar Thangavel <thangavel.k@hcl.com> Acked-by:
Samuel Mendoza-Jonas <sam@mendozajonas.com> Reviewed-by:
Paul Menzel <pmenzel@molgen.mpg.de> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Varun Prakash authored
[ Upstream commit 102110ef ] Current nvmet_try_send_ddgst() code does not check whether all data digest bytes are transmitted, fix this by returning -EAGAIN if all data digest bytes are not transmitted. Fixes: 872d26a3 ("nvmet-tcp: add NVMe over TCP target driver") Signed-off-by:
Varun Prakash <varun@chelsio.com> Reviewed-by:
Sagi Grimberg <sagi@grimberg.me> Signed-off-by:
Christoph Hellwig <hch@lst.de> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Tony Lu authored
[ Upstream commit 606a63c9 ] The side that actively closed socket, it's clcsock doesn't enter TIME_WAIT state, but the passive side does it. It should show the same behavior as TCP sockets. Consider this, when client actively closes the socket, the clcsock in server enters TIME_WAIT state, which means the address is occupied and won't be reused before TIME_WAIT dismissing. If we restarted server, the service would be unavailable for a long time. To solve this issue, shutdown the clcsock in [A], perform the TCP active close progress first, before the passive closed side closing it. So that the actively closed side enters TIME_WAIT, not the passive one. Client | Server close() // client actively close | smc_release() | smc_close_active() // PEERCLOSEWAIT1 | smc_close_final() // abort or closed = 1| smc_cdc_get_slot_and_msg_send() | [A] | |smc_cdc_msg_recv_action() // ACTIVE | queue_work(smc_close_wq, &conn->close_work) | smc_close_passive_work() // PROCESSABORT or APPCLOSEWAIT1 | smc_close_passive_abort_received() // only in abort | |close() // server recv zero, close | smc_release() // PROCESSABORT or APPCLOSEWAIT1 | smc_close_active() | smc_close_abort() or smc_close_final() // CLOSED | smc_cdc_get_slot_and_msg_send() // abort or closed = 1 smc_cdc_msg_recv_action() | smc_clcsock_release() queue_work(smc_close_wq, &conn->close_work) | sock_release(tcp) // actively close clc, enter TIME_WAIT smc_close_passive_work() // PEERCLOSEWAIT1 | smc_conn_free() smc_close_passive_abort_received() // CLOSED| smc_conn_free() | smc_clcsock_release() | sock_release(tcp) // passive close clc | Link: https://www.spinics.net/lists/netdev/msg780407.html Fixes: b38d7324 ("smc: socket closing and linkgroup cleanup") Signed-off-by:
Tony Lu <tonylu@linux.alibaba.com> Reviewed-by:
Wen Gu <guwen@linux.alibaba.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Mike Christie authored
[ Upstream commit eb97545d ] This fixes an issue added in commit 4edd8cd4 ("scsi: core: sysfs: Fix hang when device state is set via sysfs") where if userspace is requesting to set the device state to SDEV_RUNNING when the state is already SDEV_RUNNING, we return -EINVAL instead of count. The commmit above set ret to count for this case, when it should have set it to 0. Link: https://lore.kernel.org/r/20211120164917.4924-1-michael.christie@oracle.com Fixes: 4edd8cd4 ("scsi: core: sysfs: Fix hang when device state is set via sysfs") Reviewed-by:
Lee Duncan <lduncan@suse.com> Signed-off-by:
Mike Christie <michael.christie@oracle.com> Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Nikolay Aleksandrov authored
[ Upstream commit 1005f19b ] When replacing a nexthop group, we must release the IPv6 per-cpu dsts of the removed nexthop entries after an RCU grace period because they contain references to the nexthop's net device and to the fib6 info. With specific series of events[1] we can reach net device refcount imbalance which is unrecoverable. IPv4 is not affected because dsts don't take a refcount on the route. [1] $ ip nexthop list id 200 via 2002:db8::2 dev bridge.10 scope link onlink id 201 via 2002:db8::3 dev bridge scope link onlink id 203 group 201/200 $ ip -6 route 2001:db8::10 nhid 203 metric 1024 pref medium nexthop via 2002:db8::3 dev bridge weight 1 onlink nexthop via 2002:db8::2 dev bridge.10 weight 1 onlink Create rt6_info through one of the multipath legs, e.g.: $ taskset -a -c 1 ./pkt_inj 24 bridge.10 2001:db8::10 (pkt_inj is just a custom packet generator, nothing special) Then remove that leg from the group by replace (let's assume it is id 200 in this case): $ ip nexthop replace id 203 group 201 Now remove the IPv6 route: $ ip -6 route del 2001:db8::10/128 The route won't be really deleted due to the stale rt6_info holding 1 refcnt in nexthop id 200. At this point we have the following reference count dependency: (deleted) IPv6 route holds 1 reference over nhid 203 nh 203 holds 1 ref over id 201 nh 200 holds 1 ref over the net device and the route due to the stale rt6_info Now to create circular dependency between nh 200 and the IPv6 route, and also to get a reference over nh 200, restore nhid 200 in the group: $ ip nexthop replace id 203 group 201/200 And now we have a permanent circular dependncy because nhid 203 holds a reference over nh 200 and 201, but the route holds a ref over nh 203 and is deleted. To trigger the bug just delete the group (nhid 203): $ ip nexthop del id 203 It won't really be deleted due to the IPv6 route dependency, and now we have 2 unlinked and deleted objects that reference each other: the group and the IPv6 route. Since the group drops the reference it holds over its entries at free time (i.e. its own refcount needs to drop to 0) that will never happen and we get a permanent ref on them, since one of the entries holds a reference over the IPv6 route it will also never be released. At this point the dependencies are: (deleted, only unlinked) IPv6 route holds reference over group nh 203 (deleted, only unlinked) group nh 203 holds reference over nh 201 and 200 nh 200 holds 1 ref over the net device and the route due to the stale rt6_info This is the last point where it can be fixed by running traffic through nh 200, and specifically through the same CPU so the rt6_info (dst) will get released due to the IPv6 genid, that in turn will free the IPv6 route, which in turn will free the ref count over the group nh 203. If nh 200 is deleted at this point, it will never be released due to the ref from the unlinked group 203, it will only be unlinked: $ ip nexthop del id 200 $ ip nexthop $ Now we can never release that stale rt6_info, we have IPv6 route with ref over group nh 203, group nh 203 with ref over nh 200 and 201, nh 200 with rt6_info (dst) with ref over the net device and the IPv6 route. All of these objects are only unlinked, and cannot be released, thus they can't release their ref counts. Message from syslogd@dev at Nov 19 14:04:10 ... kernel:[73501.828730] unregister_netdevice: waiting for bridge.10 to become free. Usage count = 3 Message from syslogd@dev at Nov 19 14:04:20 ... kernel:[73512.068811] unregister_netdevice: waiting for bridge.10 to become free. Usage count = 3 Fixes: 7bf4796d ("nexthops: add support for replace") Signed-off-by:
Nikolay Aleksandrov <nikolay@nvidia.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Nikolay Aleksandrov authored
[ Upstream commit 8837cbbf ] We need a way to release a fib6_nh's per-cpu dsts when replacing nexthops otherwise we can end up with stale per-cpu dsts which hold net device references, so add a new IPv6 stub called fib6_nh_release_dsts. It must be used after an RCU grace period, so no new dsts can be created through a group's nexthop entry. Similar to fib6_nh_release it shouldn't be used if fib6_nh_init has failed so it doesn't need a dummy stub when IPv6 is not enabled. Fixes: 7bf4796d ("nexthops: add support for replace") Signed-off-by:
Nikolay Aleksandrov <nikolay@nvidia.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Diana Wang authored
[ Upstream commit 3bd6b2a8 ] Use nn->tlv_caps.me_freq_mhz instead of nn->me_freq_mhz to check whether rx-usecs/tx-usecs is valid. This is because nn->tlv_caps.me_freq_mhz represents the clock_freq (MHz) of the flow processing cores (FPC) on the NIC. While nn->me_freq_mhz is not be set. Fixes: ce991ab6 ("nfp: read ME frequency from vNIC ctrl memory") Signed-off-by:
Diana Wang <na.wang@corigine.com> Signed-off-by:
Simon Horman <simon.horman@corigine.com> Reviewed-by:
Jakub Kicinski <kuba@kernel.org> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Eric Dumazet authored
[ Upstream commit 19d36c5f ] We deal with IPv6 packets, so we need to use IP6CB(skb)->flags and IP6SKB_REROUTED, instead of IPCB(skb)->flags and IPSKB_REROUTED Found by code inspection, please double check that fixing this bug does not surface other bugs. Fixes: 09ee9dba ("ipv6: Reinject IPv6 packets if IPsec policy matches after SNAT") Signed-off-by:
Eric Dumazet <edumazet@google.com> Cc: Tobias Brunner <tobias@strongswan.org> Cc: Steffen Klassert <steffen.klassert@secunet.com> Cc: David Ahern <dsahern@kernel.org> Reviewed-by:
David Ahern <dsahern@kernel.org> Tested-by:
Tobias Brunner <tobias@strongswan.org> Acked-by:
Tobias Brunner <tobias@strongswan.org> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Nitesh B Venkatesh authored
[ Upstream commit e792779e ] Resolve being able to change static values on VF when adaptive interrupt moderation is enabled. This problem is fixed by checking the interrupt settings is not a combination of change of static value while adaptive interrupt moderation is turned on. Without this fix, the user would be able to change static values on VF with adaptive moderation enabled. Fixes: 65e87c03 ("i40evf: support queue-specific settings for interrupt moderation") Signed-off-by:
Nitesh B Venkatesh <nitesh.b.venkatesh@intel.com> Tested-by:
George Kuruvinakunnel <george.kuruvinakunnel@intel.com> Signed-off-by:
Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Dan Carpenter authored
[ Upstream commit 96c5f82e ] The ->gem_create_object() functions are supposed to return NULL if there is an error. None of the callers expect error pointers so returing one will lead to an Oops. See drm_gem_vram_create(), for example. Fixes: c826a6e1 ("drm/vc4: Add a BO cache.") Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
Maxime Ripard <maxime@cerno.tech> Link: https://patchwork.freedesktop.org/patch/msgid/20211118111416.GC1147@kili Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Sreekanth Reddy authored
[ Upstream commit 0ee4ba13 ] While looping over shost's sdev list it is possible that one of the drives is getting removed and its sas_target object is freed but its sdev object remains intact. Consequently, a kernel panic can occur while the driver is trying to access the sas_address field of sas_target object without also checking the sas_target object for NULL. Link: https://lore.kernel.org/r/20211117104909.2069-1-sreekanth.reddy@broadcom.com Fixes: f92363d1 ("[SCSI] mpt3sas: add new driver supporting 12GB SAS") Signed-off-by:
Sreekanth Reddy <sreekanth.reddy@broadcom.com> Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Takashi Iwai authored
[ Upstream commit 187bea47 ] When CONFIG_FORTIFY_SOURCE is set, memcpy() checks the potential buffer overflow and panics. The code in sofcpga bootstrapping contains the memcpy() calls are mistakenly translated as the shorter size, hence it triggers a panic as if it were overflowing. This patch changes the secondary_trampoline and *_end definitions to arrays for avoiding the false-positive crash above. Fixes: 9c4566a1 ("ARM: socfpga: Enable SMP for socfpga") Suggested-by:
Kees Cook <keescook@chromium.org> Buglink: https://bugzilla.suse.com/show_bug.cgi?id=1192473 Link: https://lore.kernel.org/r/20211117193244.31162-1-tiwai@suse.de Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
Dinh Nguyen <dinguyen@kernel.org> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Trond Myklebust authored
[ Upstream commit d3c45824 ] The failure to retrieve post-op attributes has no bearing on whether or not the clone operation itself was successful. We must therefore ignore the return value of decode_getfattr() when looking at the success or failure of nfs4_xdr_dec_clone(). Fixes: 36022770 ("nfs42: add CLONE xdr functions") Signed-off-by:
Trond Myklebust <trond.myklebust@hammerspace.com> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Peng Fan authored
[ Upstream commit 1446fc6c ] of_genpd_add_provider_onecell may return error, so let's propagate its return value to caller Link: https://lore.kernel.org/r/20211116064227.20571-1-peng.fan@oss.nxp.com Fixes: 898216c9 ("firmware: arm_scmi: add device power domain support using genpd") Signed-off-by:
Peng Fan <peng.fan@nxp.com> Signed-off-by:
Sudeep Holla <sudeep.holla@arm.com> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Alexander Aring authored
[ Upstream commit 451dc48c ] This patch fixes an issue that an u32 netlink value is handled as a signed enum value which doesn't fit into the range of u32 netlink type. If it's handled as -1 value some BIT() evaluation ends in a shift-out-of-bounds issue. To solve the issue we set the to u32 max which is s32 "-1" value to keep backwards compatibility and let the followed enum values start counting at 0. This brings the compiler to never handle the enum as signed and a check if the value is above NL802154_IFTYPE_MAX should filter -1 out. Fixes: f3ea5e44 ("ieee802154: add new interface command") Signed-off-by:
Alexander Aring <aahringo@redhat.com> Link: https://lore.kernel.org/r/20211112030916.685793-1-aahringo@redhat.com Signed-off-by:
Stefan Schmidt <stefan@datenfreihafen.org> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Takashi Iwai authored
[ Upstream commit 7e567b5a ] snd_ctl_remove() has to be called with card->controls_rwsem held (when called after the card instantiation). This patch add the missing rwsem calls around it. Fixes: 8a978234 ("ASoC: topology: Add topology core") Signed-off-by:
Takashi Iwai <tiwai@suse.de> Link: https://lore.kernel.org/r/20211116071812.18109-1-tiwai@suse.de Signed-off-by:
Mark Brown <broonie@kernel.org> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Srinivas Kandagatla authored
[ Upstream commit 861afeac ] Stream IDs are reused across multiple BackEnd mixers, do not reset the stream mixers if they are not already set for that particular FrontEnd. Ex: amixer cset iface=MIXER,name='SLIMBUS_0_RX Audio Mixer MultiMedia1' 1 would set the MultiMedia1 steam for SLIMBUS_0_RX, however doing below command will reset previously setup MultiMedia1 stream, because both of them are using MultiMedia1 PCM stream. amixer cset iface=MIXER,name='SLIMBUS_2_RX Audio Mixer MultiMedia1' 0 reset the FrontEnd Mixers conditionally to fix this issue. This is more noticeable in desktop setup, where in alsactl tries to restore the alsa state and overwriting the previous mixer settings. Fixes: e3a33673 ("ASoC: qdsp6: q6routing: Add q6routing driver") Signed-off-by:
Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Link: https://lore.kernel.org/r/20211116114721.12517-3-srinivas.kandagatla@linaro.org Signed-off-by:
Mark Brown <broonie@kernel.org> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Florian Fainelli authored
[ Upstream commit 40f7342f ] The GPIO controller is also an interrupt controller provider and is currently missing the appropriate 'interrupt-controller' and '#interrupt-cells' properties to denote that. Fixes: fb026d3d ("ARM: BCM5301X: Add Broadcom's bus-axi to the DTS file") Signed-off-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Florian Fainelli authored
[ Upstream commit 754c4050 ] The I2C interrupt controller line is off by 32 because the datasheet describes interrupt inputs into the GIC which are for Shared Peripheral Interrupts and are starting at offset 32. The ARM GIC binding expects the SPI interrupts to be numbered from 0 relative to the SPI base. Fixes: bb097e3e ("ARM: dts: BCM5301X: Add I2C support to the DT") Tested-by:
Christian Lamparter <chunkeey@gmail.com> Signed-off-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
yangxingwu authored
[ Upstream commit c95c0783 ] We are changing expire_nodest_conn to work even for reused connections when conn_reuse_mode=0, just as what was done with commit dc7b3eb9 ("ipvs: Fix reuse connection if real server is dead"). For controlled and persistent connections, the new connection will get the needed real server depending on the rules in ip_vs_check_template(). Fixes: d752c364 ("ipvs: allow rescheduling of new connections when port reuse is detected") Co-developed-by:
Chuanqi Liu <legend050709@qq.com> Signed-off-by:
Chuanqi Liu <legend050709@qq.com> Signed-off-by:
yangxingwu <xingwu.yang@gmail.com> Acked-by:
Simon Horman <horms@verge.net.au> Acked-by:
Julian Anastasov <ja@ssi.bg> Signed-off-by:
Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
David Hildenbrand authored
commit c1e63117 upstream. To clear a user buffer we cannot simply use memset, we have to use clear_user(). With a virtio-mem device that registers a vmcore_cb and has some logically unplugged memory inside an added Linux memory block, I can easily trigger a BUG by copying the vmcore via "cp": systemd[1]: Starting Kdump Vmcore Save Service... kdump[420]: Kdump is using the default log level(3). kdump[453]: saving to /sysroot/var/crash/127.0.0.1-2021-11-11-14:59:22/ kdump[458]: saving vmcore-dmesg.txt to /sysroot/var/crash/127.0.0.1-2021-11-11-14:59:22/ kdump[465]: saving vmcore-dmesg.txt complete kdump[467]: saving vmcore BUG: unable to handle page fault for address: 00007f2374e01000 #PF: supervisor write access in kernel mode #PF: error_code(0x0003) - permissions violation PGD 7a523067 P4D 7a523067 PUD 7a528067 PMD 7a525067 PTE 800000007048f867 Oops: 0003 [#1] PREEMPT SMP NOPTI CPU: 0 PID: 468 Comm: cp Not tainted 5.15.0+ #6 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.14.0-27-g64f37cc530f1-prebuilt.qemu.org 04/01/2014 RIP: 0010:read_from_oldmem.part.0.cold+0x1d/0x86 Code: ff ff ff e8 05 ff fe ff e9 b9 e9 7f ff 48 89 de 48 c7 c7 38 3b 60 82 e8 f1 fe fe ff 83 fd 08 72 3c 49 8d 7d 08 4c 89 e9 89 e8 <49> c7 45 00 00 00 00 00 49 c7 44 05 f8 00 00 00 00 48 83 e7 f81 RSP: 0018:ffffc9000073be08 EFLAGS: 00010212 RAX: 0000000000001000 RBX: 00000000002fd000 RCX: 00007f2374e01000 RDX: 0000000000000001 RSI: 00000000ffffdfff RDI: 00007f2374e01008 RBP: 0000000000001000 R08: 0000000000000000 R09: ffffc9000073bc50 R10: ffffc9000073bc48 R11: ffffffff829461a8 R12: 000000000000f000 R13: 00007f2374e01000 R14: 0000000000000000 R15: ffff88807bd421e8 FS: 00007f2374e12140(0000) GS:ffff88807f000000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f2374e01000 CR3: 000000007a4aa000 CR4: 0000000000350eb0 Call Trace: read_vmcore+0x236/0x2c0 proc_reg_read+0x55/0xa0 vfs_read+0x95/0x190 ksys_read+0x4f/0xc0 do_syscall_64+0x3b/0x90 entry_SYSCALL_64_after_hwframe+0x44/0xae Some x86-64 CPUs have a CPU feature called "Supervisor Mode Access Prevention (SMAP)", which is used to detect wrong access from the kernel to user buffers like this: SMAP triggers a permissions violation on wrong access. In the x86-64 variant of clear_user(), SMAP is properly handled via clac()+stac(). To fix, properly use clear_user() when we're dealing with a user buffer. Link: https://lkml.kernel.org/r/20211112092750.6921-1-david@redhat.com Fixes: 997c136f ("fs/proc/vmcore.c: add hook to read_from_oldmem() to check for non-ram pages") Signed-off-by:
David Hildenbrand <david@redhat.com> Acked-by:
Baoquan He <bhe@redhat.com> Cc: Dave Young <dyoung@redhat.com> Cc: Baoquan He <bhe@redhat.com> Cc: Vivek Goyal <vgoyal@redhat.com> Cc: Philipp Rudo <prudo@redhat.com> Cc: <stable@vger.kernel.org> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
David Hildenbrand <david@redhat.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Marek Behún authored
commit 71587801 upstream. We found out that we are unable to control the PERST# signal via the default pin dedicated to be PERST# pin (GPIO2[3] pin) on A3700 SOC when this pin is in EP_PCIE1_Resetn mode. There is a register in the PCIe register space called PERSTN_GPIO_EN (D0088004[3]), but changing the value of this register does not change the pin output when measuring with voltmeter. We do not know if this is a bug in the SOC, or if it works only when PCIe controller is in a certain state. Commit f4c7d053 ("PCI: aardvark: Wait for endpoint to be ready before training link") says that when this pin changes pinctrl mode from EP_PCIE1_Resetn to GPIO, the PERST# signal is asserted for a brief moment. So currently the situation is that on A3700 boards the PERST# signal is asserted in U-Boot (because the code in U-Boot issues reset via this pin via GPIO mode), and then in Linux by the obscure and undocumented mechanism described by the above mentioned commit. We want to issue PERST# signal in a known way, therefore this patch changes the pcie_reset_pin function from "pcie" to "gpio" and adds the reset-gpios property to the PCIe node in device tree files of EspressoBin and Armada 3720 Dev Board (Turris Mox device tree already has this property and uDPU does not have a PCIe port). Signed-off-by:
Marek Behún <marek.behun@nic.cz> Cc: Remi Pommarel <repk@triplefau.lt> Tested-by:
Tomasz Maciej Nowak <tmn505@gmail.com> Acked-by:
Thomas Petazzoni <thomas.petazzoni@bootlin.com> Signed-off-by:
Gregory CLEMENT <gregory.clement@bootlin.com> Signed-off-by:
Marek Behún <kabel@kernel.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Marek Behún authored
commit baf8d689 upstream. The PWM pins on North Bridge on Armada 37xx can be configured into PWM or GPIO functions. When in PWM function, each pin can also be configured to drive low on 0 and tri-state on 1 (LED mode). The current definitions handle this by declaring two pin groups for each pin: - group "pwmN" with functions "pwm" and "gpio" - group "ledN_od" ("od" for open drain) with functions "led" and "gpio" This is semantically incorrect. The correct definition for each pin should be one group with three functions: "pwm", "led" and "gpio". Change the "pwmN" groups to support "led" function. Remove "ledN_od" groups. This cannot break backwards compatibility with older device trees: no device tree uses it since there is no PWM driver for this SOC yet. Also "ledN_od" groups are not even documented. Fixes: b835d695 ("pinctrl: armada-37xx: swap polarity on LED group") Signed-off-by:
Marek Behún <kabel@kernel.org> Acked-by:
Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20210719112938.27594-1-kabel@kernel.org Signed-off-by:
Linus Walleij <linus.walleij@linaro.org> Signed-off-by:
Marek Behún <kabel@kernel.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Pali Rohár authored
commit bc4fac42 upstream. Aardvark supports PCIe Hot Reset via PCIE_CORE_CTRL1_REG. Use it for implementing PCI_BRIDGE_CTL_BUS_RESET bit of PCI_BRIDGE_CONTROL register on emulated bridge. With this, the function pci_reset_secondary_bus() starts working and can reset connected PCIe card. Custom userspace script [1] which uses setpci can trigger PCIe Hot Reset and reset the card manually. [1] https://alexforencich.com/wiki/en/pcie/hot-reset-linux Link: https://lore.kernel.org/r/20211028185659.20329-7-kabel@kernel.org Fixes: 8a3ebd8d ("PCI: aardvark: Implement emulated root PCI bridge config space") Signed-off-by:
Pali Rohár <pali@kernel.org> Signed-off-by:
Marek Behún <kabel@kernel.org> Signed-off-by:
Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Cc: stable@vger.kernel.org Signed-off-by:
Marek Behún <kabel@kernel.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Pali Rohár authored
commit 84e1b404 upstream. Aardvark controller has something like config space of a Root Port available at offset 0x0 of internal registers - these registers are used for implementation of the emulated bridge. The default value of Class Code of this bridge corresponds to a RAID Mass storage controller, though. (This is probably intended for when the controller is used as Endpoint.) Change the Class Code to correspond to a PCI Bridge. Add comment explaining this change. Link: https://lore.kernel.org/r/20211028185659.20329-6-kabel@kernel.org Fixes: 8a3ebd8d ("PCI: aardvark: Implement emulated root PCI bridge config space") Signed-off-by:
Pali Rohár <pali@kernel.org> Signed-off-by:
Marek Behún <kabel@kernel.org> Signed-off-by:
Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Cc: stable@vger.kernel.org Signed-off-by:
Marek Behún <kabel@kernel.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Pali Rohár authored
commit 771153fc upstream. >From very vague, ambiguous and incomplete information from Marvell we deduced that the 32-bit Aardvark register at address 0x4 (PCIE_CORE_CMD_STATUS_REG), which is not documented for Root Complex mode in the Functional Specification (only for Endpoint mode), controls two 16-bit PCIe registers: Command Register and Status Registers of PCIe Root Port. This means that bit 2 controls bus mastering and forwarding of memory and I/O requests in the upstream direction. According to PCI specifications bits [0:2] of Command Register, this should be by default disabled on reset. So explicitly disable these bits at early setup of the Aardvark driver. Remove code which unconditionally enables all 3 bits and let kernel code (via pci_set_master() function) to handle bus mastering of Root PCIe Bridge via emulated PCI_COMMAND on emulated bridge. Link: https://lore.kernel.org/r/20211028185659.20329-5-kabel@kernel.org Fixes: 8a3ebd8d ("PCI: aardvark: Implement emulated root PCI bridge config space") Signed-off-by:
Pali Rohár <pali@kernel.org> Signed-off-by:
Marek Behún <kabel@kernel.org> Signed-off-by:
Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Cc: stable@vger.kernel.org # b2a56469 ("PCI: aardvark: Add FIXME comment for PCIE_CORE_CMD_STATUS_REG access") Signed-off-by:
Marek Behún <kabel@kernel.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Pali Rohár authored
commit f76b36d4 upstream. Fix multiple link training issues in aardvark driver. The main reason of these issues was misunderstanding of what certain registers do, since their names and comments were misleading: before commit 96be36db ("PCI: aardvark: Replace custom macros by standard linux/pci_regs.h macros"), the pci-aardvark.c driver used custom macros for accessing standard PCIe Root Bridge registers, and misleading comments did not help to understand what the code was really doing. After doing more tests and experiments I've come to the conclusion that the SPEED_GEN register in aardvark sets the PCIe revision / generation compliance and forces maximal link speed. Both GEN3 and GEN2 values set the read-only PCI_EXP_FLAGS_VERS bits (PCIe capabilities version of Root Bridge) to value 2, while GEN1 value sets PCI_EXP_FLAGS_VERS to 1, which matches with PCI Express specifications revisions 3, 2 and 1 respectively. Changing SPEED_GEN also sets the read-only bits PCI_EXP_LNKCAP_SLS and PCI_EXP_LNKCAP2_SLS to corresponding speed. (Note that PCI Express rev 1 specification does not define PCI_EXP_LNKCAP2 and PCI_EXP_LNKCTL2 registers and when SPEED_GEN is set to GEN1 (which also sets PCI_EXP_FLAGS_VERS set to 1), lspci cannot access PCI_EXP_LNKCAP2 and PCI_EXP_LNKCTL2 registers.) Changing PCIe link speed can be done via PCI_EXP_LNKCTL2_TLS bits of PCI_EXP_LNKCTL2 register. Armada 3700 Functional Specifications says that the default value of PCI_EXP_LNKCTL2_TLS is based on SPEED_GEN value, but tests showed that the default value is always 8.0 GT/s, independently of speed set by SPEED_GEN. So after setting SPEED_GEN, we must also set value in PCI_EXP_LNKCTL2 register via PCI_EXP_LNKCTL2_TLS bits. Triggering PCI_EXP_LNKCTL_RL bit immediately after setting LINK_TRAINING_EN bit actually doesn't do anything. Tests have shown that a delay is needed after enabling LINK_TRAINING_EN bit. As triggering PCI_EXP_LNKCTL_RL currently does nothing, remove it. Commit 43fc679c ("PCI: aardvark: Improve link training") introduced code which sets SPEED_GEN register based on negotiated link speed from PCI_EXP_LNKSTA_CLS bits of PCI_EXP_LNKSTA register. This code was added to fix detection of Compex WLE900VX (Atheros QCA9880) WiFi GEN1 PCIe cards, as otherwise these cards were "invisible" on PCIe bus (probably because they crashed). But apparently more people reported the same issues with these cards also with other PCIe controllers [1] and I was able to reproduce this issue also with other "noname" WiFi cards based on Atheros QCA9890 chip (with the same PCI vendor/device ids as Atheros QCA9880). So this is not an issue in aardvark but rather an issue in Atheros QCA98xx chips. Also, this issue only exists if the kernel is compiled with PCIe ASPM support, and a generic workaround for this is to change PCIe Bridge to 2.5 GT/s link speed via PCI_EXP_LNKCTL2_TLS_2_5GT bits in PCI_EXP_LNKCTL2 register [2], before triggering PCI_EXP_LNKCTL_RL bit. This workaround also works when SPEED_GEN is set to value GEN2 (5 GT/s). So remove this hack completely in the aardvark driver and always set SPEED_GEN to value from 'max-link-speed' DT property. Fix for Atheros QCA98xx chips is handled separately by patch [2]. These two things (code for triggering PCI_EXP_LNKCTL_RL bit and changing SPEED_GEN value) also explain why commit 69644945 ("PCI: aardvark: Train link immediately after enabling training") somehow fixed detection of those problematic Compex cards with Atheros chips: if triggering link retraining (via PCI_EXP_LNKCTL_RL bit) was done immediately after enabling link training (via LINK_TRAINING_EN), it did nothing. If there was a specific delay, aardvark HW already initialized PCIe link and therefore triggering link retraining caused the above issue. Compex cards triggered link down event and disappeared from the PCIe bus. Commit f4c7d053 ("PCI: aardvark: Wait for endpoint to be ready before training link") added 100ms sleep before calling 'Start link training' command and explained that it is a requirement of PCI Express specification. But the code after this 100ms sleep was not doing 'Start link training', rather it triggered PCI_EXP_LNKCTL_RL bit via PCIe Root Bridge to put link into Recovery state. The required delay after fundamental reset is already done in function advk_pcie_wait_for_link() which also checks whether PCIe link is up. So after removing the code which triggers PCI_EXP_LNKCTL_RL bit on PCIe Root Bridge, there is no need to wait 100ms again. Remove the extra msleep() call and update comment about the delay required by the PCI Express specification. According to Marvell Armada 3700 Functional Specifications, Link training should be enabled via aardvark register LINK_TRAINING_EN after selecting PCIe generation and x1 lane. There is no need to disable it prior resetting card via PERST# signal. This disabling code was introduced in commit 5169a985 ("PCI: aardvark: Issue PERST via GPIO") as a workaround for some Atheros cards. It turns out that this also is Atheros specific issue and affects any PCIe controller, not only aardvark. Moreover this Atheros issue was triggered by juggling with PCI_EXP_LNKCTL_RL, LINK_TRAINING_EN and SPEED_GEN bits interleaved with sleeps. Now, after removing triggering PCI_EXP_LNKCTL_RL, there is no need to explicitly disable LINK_TRAINING_EN bit. So remove this code too. The problematic Compex cards described in previous git commits are correctly detected in advk_pcie_train_link() function even after applying all these changes. Note that with this patch, and also prior this patch, some NVMe disks which support PCIe GEN3 with 8 GT/s speed are negotiated only at the lowest link speed 2.5 GT/s, independently of SPEED_GEN value. After manually triggering PCI_EXP_LNKCTL_RL bit (e.g. from userspace via setpci), these NVMe disks change link speed to 5 GT/s when SPEED_GEN was configured to GEN2. This issue first needs to be properly investigated. I will send a fix in the future. On the other hand, some other GEN2 PCIe cards with 5 GT/s speed are autonomously by HW autonegotiated at full 5 GT/s speed without need of any software interaction. Armada 3700 Functional Specifications describes the following steps for link training: set SPEED_GEN to GEN2, enable LINK_TRAINING_EN, poll until link training is complete, trigger PCI_EXP_LNKCTL_RL, poll until signal rate is 5 GT/s, poll until link training is complete, enable ASPM L0s. The requirement for triggering PCI_EXP_LNKCTL_RL can be explained by the need to achieve 5 GT/s speed (as changing link speed is done by throw to recovery state entered by PCI_EXP_LNKCTL_RL) or maybe as a part of enabling ASPM L0s (but in this case ASPM L0s should have been enabled prior PCI_EXP_LNKCTL_RL). It is unknown why the original pci-aardvark.c driver was triggering PCI_EXP_LNKCTL_RL bit before waiting for the link to be up. This does not align with neither PCIe base specifications nor with Armada 3700 Functional Specification. (Note that in older versions of aardvark, this bit was called incorrectly PCIE_CORE_LINK_TRAINING, so this may be the reason.) It is also unknown why Armada 3700 Functional Specification says that it is needed to trigger PCI_EXP_LNKCTL_RL for GEN2 mode, as according to PCIe base specification 5 GT/s speed negotiation is supposed to be entirely autonomous, even if initial speed is 2.5 GT/s. [1] - https://lore.kernel.org/linux-pci/87h7l8axqp.fsf@toke.dk/ [2] - https://lore.kernel.org/linux-pci/20210326124326.21163-1-pali@kernel.org/ Link: https://lore.kernel.org/r/20211005180952.6812-12-kabel@kernel.org Signed-off-by:
Pali Rohár <pali@kernel.org> Signed-off-by:
Marek Behún <kabel@kernel.org> Signed-off-by:
Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by:
Marek Behún <kabel@kernel.org> Signed-off-by:
Marek Behún <kabel@kernel.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-