- Aug 24, 2022
-
-
Kuniyuki Iwashima authored
While reading sysctl_tstamp_allow_data, it can be changed concurrently. Thus, we need to add READ_ONCE() to its reader. Fixes: b245be1f ("net-timestamp: no-payload only sysctl") Signed-off-by:
Kuniyuki Iwashima <kuniyu@amazon.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Kuniyuki Iwashima authored
While reading sysctl_optmem_max, it can be changed concurrently. Thus, we need to add READ_ONCE() to its readers. Fixes: 1da177e4 ("Linux-2.6.12-rc2") Signed-off-by:
Kuniyuki Iwashima <kuniyu@amazon.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Kuniyuki Iwashima authored
While reading rs->interval and rs->burst, they can be changed concurrently via sysctl (e.g. net_ratelimit_state). Thus, we need to add READ_ONCE() to their readers. Fixes: 1da177e4 ("Linux-2.6.12-rc2") Signed-off-by:
Kuniyuki Iwashima <kuniyu@amazon.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Kuniyuki Iwashima authored
While reading netdev_tstamp_prequeue, it can be changed concurrently. Thus, we need to add READ_ONCE() to its readers. Fixes: 3b098e2d ("net: Consistent skb timestamping") Signed-off-by:
Kuniyuki Iwashima <kuniyu@amazon.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Kuniyuki Iwashima authored
While reading netdev_max_backlog, it can be changed concurrently. Thus, we need to add READ_ONCE() to its readers. While at it, we remove the unnecessary spaces in the doc. Fixes: 1da177e4 ("Linux-2.6.12-rc2") Signed-off-by:
Kuniyuki Iwashima <kuniyu@amazon.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Kuniyuki Iwashima authored
While reading weight_p, it can be changed concurrently. Thus, we need to add READ_ONCE() to its reader. Also, dev_[rt]x_weight can be read/written at the same time. So, we need to use READ_ONCE() and WRITE_ONCE() for its access. Moreover, to use the same weight_p while changing dev_[rt]x_weight, we add a mutex in proc_do_dev_weight(). Fixes: 3d48b53f ("net: dev_weight: TX/RX orthogonality") Fixes: 1da177e4 ("Linux-2.6.12-rc2") Signed-off-by:
Kuniyuki Iwashima <kuniyu@amazon.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Kuniyuki Iwashima authored
While reading sysctl_[rw]mem_(max|default), they can be changed concurrently. Thus, we need to add READ_ONCE() to its readers. Fixes: 1da177e4 ("Linux-2.6.12-rc2") Signed-off-by:
Kuniyuki Iwashima <kuniyu@amazon.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
lily authored
skb_copy_bits() could fail, which requires a check on the return value. Signed-off-by:
Li Zhong <floridsleeves@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsecDavid S. Miller authored
Steffen Klassert says: ==================== pull request (net): ipsec 2022-08-24 1) Fix a refcount leak in __xfrm_policy_check. From Xin Xiong. 2) Revert "xfrm: update SA curlft.use_time". This violates RFC 2367. From Antony Antony. 3) Fix a comment on XFRMA_LASTUSED. From Antony Antony. 4) x->lastused is not cloned in xfrm_do_migrate. Fix from Antony Antony. 5) Serialize the calls to xfrm_probe_algs. From Herbert Xu. 6) Fix a null pointer dereference of dst->dev on a metadata dst in xfrm_lookup_with_ifid. From Nikolay Aleksandrov. Please pull or let me know if there are problems. ==================== Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Csókás Bence authored
On link state change, the controller gets reset, causing PPS to drop out and the PHC to lose its time and calibration. So we restart it if needed, restoring calibration and time registers. Changes since v2: * Add `fec_ptp_save_state()`/`fec_ptp_restore_state()` * Use `ktime_get_real_ns()` * Use `BIT()` macro Changes since v1: * More ECR #define's * Stop PPS in `fec_ptp_stop()` Signed-off-by:
Csókás Bence <csokas.bence@prolan.hu> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Yang Yingliang authored
It is not allowed to call kfree_skb() from hardware interrupt context or with interrupts being disabled. So add all skb to a tmp list, then free them after spin_unlock_irqrestore() at once. Fixes: 66ba215c ("neigh: fix possible DoS due to net iface start/stop loop") Suggested-by:
Denis V. Lunev <den@openvz.org> Signed-off-by:
Yang Yingliang <yangyingliang@huawei.com> Reviewed-by:
Nikolay Aleksandrov <razor@blackwall.org> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linuxJakub Kicinski authored
Saeed Mahameed says: ==================== mlx5 fixes 2022-08-22 This series provides bug fixes to mlx5 driver. * tag 'mlx5-fixes-2022-08-22' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux: net/mlx5: Unlock on error in mlx5_sriov_enable() net/mlx5e: Fix use after free in mlx5e_fs_init() net/mlx5e: kTLS, Use _safe() iterator in mlx5e_tls_priv_tx_list_cleanup() net/mlx5: unlock on error path in esw_vfs_changed_event_handler() net/mlx5e: Fix wrong tc flag used when set hw-tc-offload off net/mlx5e: TC, Add missing policer validation net/mlx5e: Fix wrong application of the LRO state net/mlx5: Avoid false positive lockdep warning by adding lock_class_key net/mlx5: Fix cmd error logging for manage pages cmd net/mlx5: Disable irq when locking lag_lock net/mlx5: Eswitch, Fix forwarding decision to uplink net/mlx5: LAG, fix logic over MLX5_LAG_FLAG_NDEVS_READY net/mlx5e: Properly disable vlan strip on non-UL reps ==================== Link: https://lore.kernel.org/r/20220822195917.216025-1-saeed@kernel.org Signed-off-by:
Jakub Kicinski <kuba@kernel.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queueJakub Kicinski authored
Tony Nguyen says: ==================== ice: xsk: reduced queue count fixes Maciej Fijalkowski says: this small series is supposed to fix the issues around AF_XDP usage with reduced queue count on interface. Due to the XDP rings setup, some configurations can result in sockets not seeing traffic flowing. More about this in description of patch 2. * '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue: ice: xsk: use Rx ring's XDP ring when picking NAPI context ice: xsk: prohibit usage of non-balanced queue id ==================== Link: https://lore.kernel.org/r/20220822163257.2382487-1-anthony.l.nguyen@intel.com Signed-off-by:
Jakub Kicinski <kuba@kernel.org>
-
Jakub Kicinski authored
Michael Chan says: ==================== bnxt_en: Bug fixes This series includes 2 fixes for regressions introduced by the XDP multi-buffer feature, 1 devlink reload bug fix, and 1 SRIOV resource accounting bug fix. ==================== Link: https://lore.kernel.org/r/1661180814-19350-1-git-send-email-michael.chan@broadcom.com Signed-off-by:
Jakub Kicinski <kuba@kernel.org>
-
Vikas Gupta authored
LRO/GRO_HW should be disabled if there is an attached XDP program. BNXT_FLAG_TPA is the current setting of the LRO/GRO_HW. Using BNXT_FLAG_TPA to disable LRO/GRO_HW will cause these features to be permanently disabled once they are disabled. Fixes: 1dc4c557 ("bnxt: adding bnxt_xdp_build_skb to build skb from multibuffer xdp_buff") Signed-off-by:
Vikas Gupta <vikas.gupta@broadcom.com> Signed-off-by:
Michael Chan <michael.chan@broadcom.com> Signed-off-by:
Jakub Kicinski <kuba@kernel.org>
-
Vikas Gupta authored
There are 2 issues: 1. We should decrement hw_resc->max_nqs instead of hw_resc->max_irqs with the number of NQs assigned to the VFs. The IRQs are fixed on each function and cannot be re-assigned. Only the NQs are being assigned to the VFs. 2. vf_msix is the total number of NQs to be assigned to the VFs. So we should decrement vf_msix from hw_resc->max_nqs. Fixes: b16b6891 ("bnxt_en: Add SR-IOV support for 57500 chips.") Signed-off-by:
Vikas Gupta <vikas.gupta@broadcom.com> Signed-off-by:
Michael Chan <michael.chan@broadcom.com> Signed-off-by:
Jakub Kicinski <kuba@kernel.org>
-
Vikas Gupta authored
Add missing devlink_set_features() API for callbacks reload_down and reload_up to function. Fixes: 228ea8c1 ("bnxt_en: implement devlink dev reload driver_reinit") Reviewed-by:
Somnath Kotur <somnath.kotur@broadcom.com> Signed-off-by:
Vikas Gupta <vikas.gupta@broadcom.com> Signed-off-by:
Michael Chan <michael.chan@broadcom.com> Signed-off-by:
Jakub Kicinski <kuba@kernel.org>
-
Pavan Chebbi authored
Using BNXT_PAGE_MODE_BUF_SIZE + offset as buffer length value is not sufficient when running single buffer XDP programs doing redirect operations. The stack will complain on missing skb tail room. Fix it by using PAGE_SIZE when calling xdp_init_buff() for single buffer programs. Fixes: b231c3f3 ("bnxt: refactor bnxt_rx_xdp to separate xdp_init_buff/xdp_prepare_buff") Reviewed-by:
Somnath Kotur <somnath.kotur@broadcom.com> Signed-off-by:
Pavan Chebbi <pavan.chebbi@broadcom.com> Signed-off-by:
Michael Chan <michael.chan@broadcom.com> Signed-off-by:
Jakub Kicinski <kuba@kernel.org>
-
Vladimir Oltean authored
Address learning should initially be turned off by the driver for port operation in standalone mode, then the DSA core handles changes to it via ds->ops->port_bridge_flags(). Leaving address learning enabled while ports are standalone breaks any kind of communication which involves port B receiving what port A has sent. Notably it breaks the ksz9477 driver used with a (non offloaded, ports act as if standalone) bonding interface in active-backup mode, when the ports are connected together through external switches, for redundancy purposes. This fixes a major design flaw in the ksz9477 and ksz8795 drivers, which unconditionally leave address learning enabled even while ports operate as standalone. Fixes: b987e98e ("dsa: add DSA switch driver for Microchip KSZ9477") Link: https://lore.kernel.org/netdev/CAFZh4h-JVWt80CrQWkFji7tZJahMfOToUJQgKS5s0_=9zzpvYQ@mail.gmail.com/ Reported-by:
Brian Hutchinson <b.hutchman@gmail.com> Signed-off-by:
Vladimir Oltean <vladimir.oltean@nxp.com> Link: https://lore.kernel.org/r/20220818164809.3198039-1-vladimir.oltean@nxp.com Signed-off-by:
Jakub Kicinski <kuba@kernel.org>
-
- Aug 23, 2022
-
-
Vladimir Oltean authored
When a driver returns -EOPNOTSUPP in dsa_port_bridge_join() but failed to provide a reason for it, DSA attempts to set the extack to say that software fallback will kick in. The problem is, when we use brctl and the legacy bridge ioctls, the extack will be NULL, and DSA dereferences it in the process of setting it. Sergei Antonov proves this using the following stack trace: Unable to handle kernel NULL pointer dereference at virtual address 00000000 PC is at dsa_slave_changeupper+0x5c/0x158 dsa_slave_changeupper from raw_notifier_call_chain+0x38/0x6c raw_notifier_call_chain from __netdev_upper_dev_link+0x198/0x3b4 __netdev_upper_dev_link from netdev_master_upper_dev_link+0x50/0x78 netdev_master_upper_dev_link from br_add_if+0x430/0x7f4 br_add_if from br_ioctl_stub+0x170/0x530 br_ioctl_stub from br_ioctl_call+0x54/0x7c br_ioctl_call from dev_ifsioc+0x4e0/0x6bc dev_ifsioc from dev_ioctl+0x2f8/0x758 dev_ioctl from sock_ioctl+0x5f0/0x674 sock_ioctl from sys_ioctl+0x518/0xe40 sys_ioctl from ret_fast_syscall+0x0/0x1c Fix the problem by only overriding the extack if non-NULL. Fixes: 1c6e8088 ("net: dsa: allow port_bridge_join() to override extack message") Link: https://lore.kernel.org/netdev/CABikg9wx7vB5eRDAYtvAm7fprJ09Ta27a4ZazC=NX5K4wn6pWA@mail.gmail.com/ Reported-by:
Sergei Antonov <saproj@gmail.com> Signed-off-by:
Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by:
Florian Fainelli <f.fainelli@gmail.com> Tested-by:
Sergei Antonov <saproj@gmail.com> Link: https://lore.kernel.org/r/20220819173925.3581871-1-vladimir.oltean@nxp.com Signed-off-by:
Jakub Kicinski <kuba@kernel.org>
-
Maciej Żenczykowski authored
Looks to have been left out in an oversight. Cc: Mahesh Bandewar <maheshb@google.com> Cc: Sainath Grandhi <sainath.grandhi@intel.com> Fixes: 235a9d89 ('ipvtap: IP-VLAN based tap driver') Signed-off-by:
Maciej Żenczykowski <maze@google.com> Link: https://lore.kernel.org/r/20220821130808.12143-1-zenczykowski@gmail.com Signed-off-by:
Paolo Abeni <pabeni@redhat.com>
-
Jakub Kicinski authored
Jonathan Toppins says: ==================== bonding: 802.3ad: fix no transmission of LACPDUs Configuring a bond in a specific order can leave the bond in a state where it never transmits LACPDUs. The first patch adds some kselftest infrastructure and the reproducer that demonstrates the problem. The second patch fixes the issue. The new third patch makes ad_ticks_per_sec a static const and removes the passing of this variable via the stack. ==================== Link: https://lore.kernel.org/r/cover.1660919940.git.jtoppins@redhat.com Signed-off-by:
Jakub Kicinski <kuba@kernel.org>
-
Jonathan Toppins authored
The value is only ever set once in bond_3ad_initialize and only ever read otherwise. There seems to be no reason to set the variable via bond_3ad_initialize when setting the global variable will do. Change ad_ticks_per_sec to a const to enforce its read-only usage. Signed-off-by:
Jonathan Toppins <jtoppins@redhat.com> Acked-by:
Jay Vosburgh <jay.vosburgh@canonical.com> Signed-off-by:
Jakub Kicinski <kuba@kernel.org>
-
Jonathan Toppins authored
This is caused by the global variable ad_ticks_per_sec being zero as demonstrated by the reproducer script discussed below. This causes all timer values in __ad_timer_to_ticks to be zero, resulting in the periodic timer to never fire. To reproduce: Run the script in `tools/testing/selftests/drivers/net/bonding/bond-break-lacpdu-tx.sh` which puts bonding into a state where it never transmits LACPDUs. line 44: ip link add fbond type bond mode 4 miimon 200 \ xmit_hash_policy 1 ad_actor_sys_prio 65535 lacp_rate fast setting bond param: ad_actor_sys_prio given: params.ad_actor_system = 0 call stack: bond_option_ad_actor_sys_prio() -> bond_3ad_update_ad_actor_settings() -> set ad.system.sys_priority = bond->params.ad_actor_sys_prio -> ad.system.sys_mac_addr = bond->dev->dev_addr; because params.ad_actor_system == 0 results: ad.system.sys_mac_addr = bond->dev->dev_addr line 48: ip link set fbond address 52:54:00:3B:7C:A6 setting bond MAC addr call stack: bond->dev->dev_addr = new_mac line 52: ip link set fbond type bond ad_actor_sys_prio 65535 setting bond param: ad_actor_sys_prio given: params.ad_actor_system = 0 call stack: bond_option_ad_actor_sys_prio() -> bond_3ad_update_ad_actor_settings() -> set ad.system.sys_priority = bond->params.ad_actor_sys_prio -> ad.system.sys_mac_addr = bond->dev->dev_addr; because params.ad_actor_system == 0 results: ad.system.sys_mac_addr = bond->dev->dev_addr line 60: ip link set veth1-bond down master fbond given: params.ad_actor_system = 0 params.mode = BOND_MODE_8023AD ad.system.sys_mac_addr == bond->dev->dev_addr call stack: bond_enslave -> bond_3ad_initialize(); because first slave -> if ad.system.sys_mac_addr != bond->dev->dev_addr return results: Nothing is run in bond_3ad_initialize() because dev_addr equals sys_mac_addr leaving the global ad_ticks_per_sec zero as it is never initialized anywhere else. The if check around the contents of bond_3ad_initialize() is no longer needed due to commit 5ee14e6d ("bonding: 3ad: apply ad_actor settings changes immediately") which sets ad.system.sys_mac_addr if any one of the bonding parameters whos set function calls bond_3ad_update_ad_actor_settings(). This is because if ad.system.sys_mac_addr is zero it will be set to the current bond mac address, this causes the if check to never be true. Fixes: 5ee14e6d ("bonding: 3ad: apply ad_actor settings changes immediately") Signed-off-by:
Jonathan Toppins <jtoppins@redhat.com> Acked-by:
Jay Vosburgh <jay.vosburgh@canonical.com> Signed-off-by:
Jakub Kicinski <kuba@kernel.org>
-
Jonathan Toppins authored
This creates a test collection in drivers/net/bonding for bonding specific kernel selftests. The first test is a reproducer that provisions a bond and given the specific order in how the ip-link(8) commands are issued the bond never transmits an LACPDU frame on any of its slaves. Signed-off-by:
Jonathan Toppins <jtoppins@redhat.com> Acked-by:
Jay Vosburgh <jay.vosburgh@canonical.com> Signed-off-by:
Jakub Kicinski <kuba@kernel.org>
-
Sergei Antonov authored
Since priv->rx_mapping[i] is maped in moxart_mac_open(), we should unmap it from moxart_mac_stop(). Fixes 2 warnings. 1. During error unwinding in moxart_mac_probe(): "goto init_fail;", then moxart_mac_free_memory() calls dma_unmap_single() with priv->rx_mapping[i] pointers zeroed. WARNING: CPU: 0 PID: 1 at kernel/dma/debug.c:963 check_unmap+0x704/0x980 DMA-API: moxart-ethernet 92000000.mac: device driver tries to free DMA memory it has not allocated [device address=0x0000000000000000] [size=1600 bytes] CPU: 0 PID: 1 Comm: swapper Not tainted 5.19.0+ #60 Hardware name: Generic DT based system unwind_backtrace from show_stack+0x10/0x14 show_stack from dump_stack_lvl+0x34/0x44 dump_stack_lvl from __warn+0xbc/0x1f0 __warn from warn_slowpath_fmt+0x94/0xc8 warn_slowpath_fmt from check_unmap+0x704/0x980 check_unmap from debug_dma_unmap_page+0x8c/0x9c debug_dma_unmap_page from moxart_mac_free_memory+0x3c/0xa8 moxart_mac_free_memory from moxart_mac_probe+0x190/0x218 moxart_mac_probe from platform_probe+0x48/0x88 platform_probe from really_probe+0xc0/0x2e4 2. After commands: ip link set dev eth0 down ip link set dev eth0 up WARNING: CPU: 0 PID: 55 at kernel/dma/debug.c:570 add_dma_entry+0x204/0x2ec DMA-API: moxart-ethernet 92000000.mac: cacheline tracking EEXIST, overlapping mappings aren't supported CPU: 0 PID: 55 Comm: ip Not tainted 5.19.0+ #57 Hardware name: Generic DT based system unwind_backtrace from show_stack+0x10/0x14 show_stack from dump_stack_lvl+0x34/0x44 dump_stack_lvl from __warn+0xbc/0x1f0 __warn from warn_slowpath_fmt+0x94/0xc8 warn_slowpath_fmt from add_dma_entry+0x204/0x2ec add_dma_entry from dma_map_page_attrs+0x110/0x328 dma_map_page_attrs from moxart_mac_open+0x134/0x320 moxart_mac_open from __dev_open+0x11c/0x1ec __dev_open from __dev_change_flags+0x194/0x22c __dev_change_flags from dev_change_flags+0x14/0x44 dev_change_flags from devinet_ioctl+0x6d4/0x93c devinet_ioctl from inet_ioctl+0x1ac/0x25c v1 -> v2: Extraneous change removed. Fixes: 6c821bd9 ("net: Add MOXA ART SoCs ethernet driver") Signed-off-by:
Sergei Antonov <saproj@gmail.com> Reviewed-by:
Andrew Lunn <andrew@lunn.ch> Link: https://lore.kernel.org/r/20220819110519.1230877-1-saproj@gmail.com Signed-off-by:
Jakub Kicinski <kuba@kernel.org>
-
Xiaolei Wang authored
For some MAC drivers, they set the mac_managed_pm to true in its ->ndo_open() callback. So before the mac_managed_pm is set to true, we still want to leverage the mdio_bus_phy_suspend()/resume() for the phy device suspend and resume. In this case, the phy device is in PHY_READY, and we shouldn't warn about this. It also seems that the check of mac_managed_pm in WARN_ON is redundant since we already check this in the entry of mdio_bus_phy_resume(), so drop it. Fixes: 744d23c7 ("net: phy: Warn about incorrect mdio_bus_phy_resume() state") Signed-off-by:
Xiaolei Wang <xiaolei.wang@windriver.com> Acked-by:
Florian Fainelli <f.fainelli@gmail.com> Link: https://lore.kernel.org/r/20220819082451.1992102-1-xiaolei.wang@windriver.com Signed-off-by:
Jakub Kicinski <kuba@kernel.org>
-
Alex Elder authored
In ipa_smem_init(), a Qualcomm SMEM region is allocated (if needed) and then its virtual address is fetched using qcom_smem_get(). The physical address associated with that region is also fetched. The physical address is adjusted so that it is page-aligned, and an attempt is made to update the size of the region to compensate for any non-zero adjustment. But that adjustment isn't done properly. The physical address is aligned twice, and as a result the size is never actually adjusted. Fix this by *not* aligning the "addr" local variable, and instead making the "phys" local variable be the adjusted "addr" value. Fixes: a0036bb4 ("net: ipa: define SMEM memory region for IPA") Signed-off-by:
Alex Elder <elder@linaro.org> Link: https://lore.kernel.org/r/20220818134206.567618-1-elder@linaro.org Signed-off-by:
Jakub Kicinski <kuba@kernel.org>
-
Vladimir Oltean authored
DSA has multiple ways of specifying a MAC connection to an internal PHY. One requires a DT description like this: port@0 { reg = <0>; phy-handle = <&internal_phy>; phy-mode = "internal"; }; (which is IMO the recommended approach, as it is the clearest description) but it is also possible to leave the specification as just: port@0 { reg = <0>; } and if the driver implements ds->ops->phy_read and ds->ops->phy_write, the DSA framework "knows" it should create a ds->slave_mii_bus, and it should connect to a non-OF-based internal PHY on this MDIO bus, at an MDIO address equal to the port address. There is also an intermediary way of describing things: port@0 { reg = <0>; phy-handle = <&internal_phy>; }; In case 2, DSA calls phylink_connect_phy() and in case 3, it calls phylink_of_phy_connect(). In both cases, phylink_create() has been called with a phy_interface_t of PHY_INTERFACE_MODE_NA, and in both cases, PHY_INTERFACE_MODE_NA is translated into phy->interface. It is important to note that phy_device_create() initializes dev->interface = PHY_INTERFACE_MODE_GMII, and so, when we use phylink_create(PHY_INTERFACE_MODE_NA), no one will override this, and we will end up with a PHY_INTERFACE_MODE_GMII interface inherited from the PHY. All this means that in order to maintain compatibility with device tree blobs where the phy-mode property is missing, we need to allow the "gmii" phy-mode and treat it as "internal". Fixes: 2c709e0b ("net: dsa: microchip: ksz8795: add phylink support") Link: https://bugzilla.kernel.org/show_bug.cgi?id=216320 Reported-by:
Craig McQueen <craig@mcqueen.id.au> Signed-off-by:
Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by:
Alvin Šipraga <alsi@bang-olufsen.dk> Tested-by:
Rasmus Villemoes <rasmus.villemoes@prevas.dk> Link: https://lore.kernel.org/r/20220818143250.2797111-1-vladimir.oltean@nxp.com Signed-off-by:
Jakub Kicinski <kuba@kernel.org>
-
Dan Carpenter authored
Unlock before returning if mlx5_device_enable_sriov() fails. Fixes: 84a433a4 ("net/mlx5: Lock mlx5 devlink reload callbacks") Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
Saeed Mahameed <saeedm@nvidia.com>
-
Dan Carpenter authored
Call mlx5e_fs_vlan_free(fs) before kvfree(fs). Fixes: af8bbf73 ("net/mlx5e: Convert mlx5e_flow_steering member of mlx5e_priv to pointer") Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by:
Tariq Toukan <tariqt@nvidia.com> Signed-off-by:
Saeed Mahameed <saeedm@nvidia.com>
-
Dan Carpenter authored
Use the list_for_each_entry_safe() macro to prevent dereferencing "obj" after it has been freed. Fixes: c4dfe704 ("net/mlx5e: kTLS, Recycle objects of device-offloaded TLS TX connections") Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by:
Tariq Toukan <tariqt@nvidia.com> Signed-off-by:
Saeed Mahameed <saeedm@nvidia.com>
-
Dan Carpenter authored
Unlock before returning on this error path. Fixes: f1bc646c ("net/mlx5: Use devl_ API in mlx5_esw_offloads_devlink_port_register") Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
Saeed Mahameed <saeedm@nvidia.com>
-
Maor Dickman authored
The cited commit reintroduced the ability to set hw-tc-offload in switchdev mode by reusing NIC mode calls without modifying it to support both modes, this can cause an illegal memory access when trying to turn hw-tc-offload off. Fix this by using the right TC_FLAG when checking if tc rules are installed while disabling hw-tc-offload. Fixes: d3cbd425 ("net/mlx5e: Add ndo_set_feature for uplink representor") Signed-off-by:
Maor Dickman <maord@nvidia.com> Signed-off-by:
Saeed Mahameed <saeedm@nvidia.com>
-
Roi Dayan authored
There is a missing policer validation when offloading police action with tc action api. Add it. Fixes: 7d1a5ce4 ("net/mlx5e: TC, Support tc action api for police") Signed-off-by:
Roi Dayan <roid@nvidia.com> Reviewed-by:
Maor Dickman <maord@nvidia.com> Signed-off-by:
Saeed Mahameed <saeedm@nvidia.com>
-
Aya Levin authored
Driver caches packet merge type in mlx5e_params instance which must be in perfect sync with the netdev_feature's bit. Prior to this patch, in certain conditions (*) LRO state was set in mlx5e_params, while netdev_feature's bit was off. Causing the LRO to be applied on the RQs (HW level). (*) This can happen only on profile init (mlx5e_build_nic_params()), when RQ expect non-linear SKB and PCI is fast enough in comparison to link width. Solution: remove setting of packet merge type from mlx5e_build_nic_params() as netdev features are not updated. Fixes: 619a8f2a ("net/mlx5e: Use linear SKB in Striding RQ") Signed-off-by:
Aya Levin <ayal@nvidia.com> Reviewed-by:
Tariq Toukan <tariqt@nvidia.com> Reviewed-by:
Maxim Mikityanskiy <maximmi@nvidia.com> Signed-off-by:
Saeed Mahameed <saeedm@nvidia.com>
-
Moshe Shemesh authored
Add a lock_class_key per mlx5 device to avoid a false positive "possible circular locking dependency" warning by lockdep, on flows which lock more than one mlx5 device, such as adding SF. kernel log: ====================================================== WARNING: possible circular locking dependency detected 5.19.0-rc8+ #2 Not tainted ------------------------------------------------------ kworker/u20:0/8 is trying to acquire lock: ffff88812dfe0d98 (&dev->intf_state_mutex){+.+.}-{3:3}, at: mlx5_init_one+0x2e/0x490 [mlx5_core] but task is already holding lock: ffff888101aa7898 (&(¬ifier->n_head)->rwsem){++++}-{3:3}, at: blocking_notifier_call_chain+0x5a/0x130 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #1 (&(¬ifier->n_head)->rwsem){++++}-{3:3}: down_write+0x90/0x150 blocking_notifier_chain_register+0x53/0xa0 mlx5_sf_table_init+0x369/0x4a0 [mlx5_core] mlx5_init_one+0x261/0x490 [mlx5_core] probe_one+0x430/0x680 [mlx5_core] local_pci_probe+0xd6/0x170 work_for_cpu_fn+0x4e/0xa0 process_one_work+0x7c2/0x1340 worker_thread+0x6f6/0xec0 kthread+0x28f/0x330 ret_from_fork+0x1f/0x30 -> #0 (&dev->intf_state_mutex){+.+.}-{3:3}: __lock_acquire+0x2fc7/0x6720 lock_acquire+0x1c1/0x550 __mutex_lock+0x12c/0x14b0 mlx5_init_one+0x2e/0x490 [mlx5_core] mlx5_sf_dev_probe+0x29c/0x370 [mlx5_core] auxiliary_bus_probe+0x9d/0xe0 really_probe+0x1e0/0xaa0 __driver_probe_device+0x219/0x480 driver_probe_device+0x49/0x130 __device_attach_driver+0x1b8/0x280 bus_for_each_drv+0x123/0x1a0 __device_attach+0x1a3/0x460 bus_probe_device+0x1a2/0x260 device_add+0x9b1/0x1b40 __auxiliary_device_add+0x88/0xc0 mlx5_sf_dev_state_change_handler+0x67e/0x9d0 [mlx5_core] blocking_notifier_call_chain+0xd5/0x130 mlx5_vhca_state_work_handler+0x2b0/0x3f0 [mlx5_core] process_one_work+0x7c2/0x1340 worker_thread+0x59d/0xec0 kthread+0x28f/0x330 ret_from_fork+0x1f/0x30 other info that might help us debug this: Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(&(¬ifier->n_head)->rwsem); lock(&dev->intf_state_mutex); lock(&(¬ifier->n_head)->rwsem); lock(&dev->intf_state_mutex); *** DEADLOCK *** 4 locks held by kworker/u20:0/8: #0: ffff888150612938 ((wq_completion)mlx5_events){+.+.}-{0:0}, at: process_one_work+0x6e2/0x1340 #1: ffff888100cafdb8 ((work_completion)(&work->work)#3){+.+.}-{0:0}, at: process_one_work+0x70f/0x1340 #2: ffff888101aa7898 (&(¬ifier->n_head)->rwsem){++++}-{3:3}, at: blocking_notifier_call_chain+0x5a/0x130 #3: ffff88813682d0e8 (&dev->mutex){....}-{3:3}, at:__device_attach+0x76/0x460 stack backtrace: CPU: 6 PID: 8 Comm: kworker/u20:0 Not tainted 5.19.0-rc8+ Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014 Workqueue: mlx5_events mlx5_vhca_state_work_handler [mlx5_core] Call Trace: <TASK> dump_stack_lvl+0x57/0x7d check_noncircular+0x278/0x300 ? print_circular_bug+0x460/0x460 ? lock_chain_count+0x20/0x20 ? register_lock_class+0x1880/0x1880 __lock_acquire+0x2fc7/0x6720 ? register_lock_class+0x1880/0x1880 ? register_lock_class+0x1880/0x1880 lock_acquire+0x1c1/0x550 ? mlx5_init_one+0x2e/0x490 [mlx5_core] ? lockdep_hardirqs_on_prepare+0x400/0x400 __mutex_lock+0x12c/0x14b0 ? mlx5_init_one+0x2e/0x490 [mlx5_core] ? mlx5_init_one+0x2e/0x490 [mlx5_core] ? _raw_read_unlock+0x1f/0x30 ? mutex_lock_io_nested+0x1320/0x1320 ? __ioremap_caller.constprop.0+0x306/0x490 ? mlx5_sf_dev_probe+0x269/0x370 [mlx5_core] ? iounmap+0x160/0x160 mlx5_init_one+0x2e/0x490 [mlx5_core] mlx5_sf_dev_probe+0x29c/0x370 [mlx5_core] ? mlx5_sf_dev_remove+0x130/0x130 [mlx5_core] auxiliary_bus_probe+0x9d/0xe0 really_probe+0x1e0/0xaa0 __driver_probe_device+0x219/0x480 ? auxiliary_match_id+0xe9/0x140 driver_probe_device+0x49/0x130 __device_attach_driver+0x1b8/0x280 ? driver_allows_async_probing+0x140/0x140 bus_for_each_drv+0x123/0x1a0 ? bus_for_each_dev+0x1a0/0x1a0 ? lockdep_hardirqs_on_prepare+0x286/0x400 ? trace_hardirqs_on+0x2d/0x100 __device_attach+0x1a3/0x460 ? device_driver_attach+0x1e0/0x1e0 ? kobject_uevent_env+0x22d/0xf10 bus_probe_device+0x1a2/0x260 device_add+0x9b1/0x1b40 ? dev_set_name+0xab/0xe0 ? __fw_devlink_link_to_suppliers+0x260/0x260 ? memset+0x20/0x40 ? lockdep_init_map_type+0x21a/0x7d0 __auxiliary_device_add+0x88/0xc0 ? auxiliary_device_init+0x86/0xa0 mlx5_sf_dev_state_change_handler+0x67e/0x9d0 [mlx5_core] blocking_notifier_call_chain+0xd5/0x130 mlx5_vhca_state_work_handler+0x2b0/0x3f0 [mlx5_core] ? mlx5_vhca_event_arm+0x100/0x100 [mlx5_core] ? lock_downgrade+0x6e0/0x6e0 ? lockdep_hardirqs_on_prepare+0x286/0x400 process_one_work+0x7c2/0x1340 ? lockdep_hardirqs_on_prepare+0x400/0x400 ? pwq_dec_nr_in_flight+0x230/0x230 ? rwlock_bug.part.0+0x90/0x90 worker_thread+0x59d/0xec0 ? process_one_work+0x1340/0x1340 kthread+0x28f/0x330 ? kthread_complete_and_exit+0x20/0x20 ret_from_fork+0x1f/0x30 </TASK> Fixes: 6a327321 ("net/mlx5: SF, Port function state change support") Signed-off-by:
Moshe Shemesh <moshe@nvidia.com> Reviewed-by:
Shay Drory <shayd@nvidia.com> Signed-off-by:
Saeed Mahameed <saeedm@nvidia.com>
-
Roy Novich authored
When the driver unloads, give/reclaim_pages may fail as PF driver in teardown flow, current code will lead to the following kernel log print 'failed reclaiming pages: err 0'. Fix it to get same behavior as before the cited commits, by calling mlx5_cmd_check before handling error state. mlx5_cmd_check will verify if the returned error is an actual error needed to be handled by the driver or not and will return an appropriate value. Fixes: 8d564292 ("net/mlx5: Remove redundant error on reclaim pages") Fixes: 4dac2f10 ("net/mlx5: Remove redundant notify fail on give pages") Signed-off-by:
Roy Novich <royno@nvidia.com> Reviewed-by:
Moshe Shemesh <moshe@nvidia.com> Signed-off-by:
Saeed Mahameed <saeedm@nvidia.com>
-
Vlad Buslov authored
The lag_lock is taken from both process and softirq contexts which results lockdep warning[0] about potential deadlock. However, just disabling softirqs by using *_bh spinlock API is not enough since it will cause warning in some contexts where the lock is obtained with hard irqs disabled. To fix the issue save current irq state, disable them before obtaining the lock an re-enable irqs from saved state after releasing it. [0]: [Sun Aug 7 13:12:29 2022] ================================ [Sun Aug 7 13:12:29 2022] WARNING: inconsistent lock state [Sun Aug 7 13:12:29 2022] 5.19.0_for_upstream_debug_2022_08_04_16_06 #1 Not tainted [Sun Aug 7 13:12:29 2022] -------------------------------- [Sun Aug 7 13:12:29 2022] inconsistent {SOFTIRQ-ON-W} -> {IN-SOFTIRQ-W} usage. [Sun Aug 7 13:12:29 2022] swapper/0/0 [HC0[0]:SC1[1]:HE1:SE0] takes: [Sun Aug 7 13:12:29 2022] ffffffffa06dc0d8 (lag_lock){+.?.}-{2:2}, at: mlx5_lag_is_shared_fdb+0x1f/0x120 [mlx5_core] [Sun Aug 7 13:12:29 2022] {SOFTIRQ-ON-W} state was registered at: [Sun Aug 7 13:12:29 2022] lock_acquire+0x1c1/0x550 [Sun Aug 7 13:12:29 2022] _raw_spin_lock+0x2c/0x40 [Sun Aug 7 13:12:29 2022] mlx5_lag_add_netdev+0x13b/0x480 [mlx5_core] [Sun Aug 7 13:12:29 2022] mlx5e_nic_enable+0x114/0x470 [mlx5_core] [Sun Aug 7 13:12:29 2022] mlx5e_attach_netdev+0x30e/0x6a0 [mlx5_core] [Sun Aug 7 13:12:29 2022] mlx5e_resume+0x105/0x160 [mlx5_core] [Sun Aug 7 13:12:29 2022] mlx5e_probe+0xac3/0x14f0 [mlx5_core] [Sun Aug 7 13:12:29 2022] auxiliary_bus_probe+0x9d/0xe0 [Sun Aug 7 13:12:29 2022] really_probe+0x1e0/0xaa0 [Sun Aug 7 13:12:29 2022] __driver_probe_device+0x219/0x480 [Sun Aug 7 13:12:29 2022] driver_probe_device+0x49/0x130 [Sun Aug 7 13:12:29 2022] __driver_attach+0x1e4/0x4d0 [Sun Aug 7 13:12:29 2022] bus_for_each_dev+0x11e/0x1a0 [Sun Aug 7 13:12:29 2022] bus_add_driver+0x3f4/0x5a0 [Sun Aug 7 13:12:29 2022] driver_register+0x20f/0x390 [Sun Aug 7 13:12:29 2022] __auxiliary_driver_register+0x14e/0x260 [Sun Aug 7 13:12:29 2022] mlx5e_init+0x38/0x90 [mlx5_core] [Sun Aug 7 13:12:29 2022] vhost_iotlb_itree_augment_rotate+0xcb/0x180 [vhost_iotlb] [Sun Aug 7 13:12:29 2022] do_one_initcall+0xc4/0x400 [Sun Aug 7 13:12:29 2022] do_init_module+0x18a/0x620 [Sun Aug 7 13:12:29 2022] load_module+0x563a/0x7040 [Sun Aug 7 13:12:29 2022] __do_sys_finit_module+0x122/0x1d0 [Sun Aug 7 13:12:29 2022] do_syscall_64+0x3d/0x90 [Sun Aug 7 13:12:29 2022] entry_SYSCALL_64_after_hwframe+0x46/0xb0 [Sun Aug 7 13:12:29 2022] irq event stamp: 3596508 [Sun Aug 7 13:12:29 2022] hardirqs last enabled at (3596508): [<ffffffff813687c2>] __local_bh_enable_ip+0xa2/0x100 [Sun Aug 7 13:12:29 2022] hardirqs last disabled at (3596507): [<ffffffff813687da>] __local_bh_enable_ip+0xba/0x100 [Sun Aug 7 13:12:29 2022] softirqs last enabled at (3596488): [<ffffffff81368a2a>] irq_exit_rcu+0x11a/0x170 [Sun Aug 7 13:12:29 2022] softirqs last disabled at (3596495): [<ffffffff81368a2a>] irq_exit_rcu+0x11a/0x170 [Sun Aug 7 13:12:29 2022] other info that might help us debug this: [Sun Aug 7 13:12:29 2022] Possible unsafe locking scenario: [Sun Aug 7 13:12:29 2022] CPU0 [Sun Aug 7 13:12:29 2022] ---- [Sun Aug 7 13:12:29 2022] lock(lag_lock); [Sun Aug 7 13:12:29 2022] <Interrupt> [Sun Aug 7 13:12:29 2022] lock(lag_lock); [Sun Aug 7 13:12:29 2022] *** DEADLOCK *** [Sun Aug 7 13:12:29 2022] 4 locks held by swapper/0/0: [Sun Aug 7 13:12:29 2022] #0: ffffffff84643260 (rcu_read_lock){....}-{1:2}, at: mlx5e_napi_poll+0x43/0x20a0 [mlx5_core] [Sun Aug 7 13:12:29 2022] #1: ffffffff84643260 (rcu_read_lock){....}-{1:2}, at: netif_receive_skb_list_internal+0x2d7/0xd60 [Sun Aug 7 13:12:29 2022] #2: ffff888144a18b58 (&br->hash_lock){+.-.}-{2:2}, at: br_fdb_update+0x301/0x570 [Sun Aug 7 13:12:29 2022] #3: ffffffff84643260 (rcu_read_lock){....}-{1:2}, at: atomic_notifier_call_chain+0x5/0x1d0 [Sun Aug 7 13:12:29 2022] stack backtrace: [Sun Aug 7 13:12:29 2022] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.19.0_for_upstream_debug_2022_08_04_16_06 #1 [Sun Aug 7 13:12:29 2022] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014 [Sun Aug 7 13:12:29 2022] Call Trace: [Sun Aug 7 13:12:29 2022] <IRQ> [Sun Aug 7 13:12:29 2022] dump_stack_lvl+0x57/0x7d [Sun Aug 7 13:12:29 2022] mark_lock.part.0.cold+0x5f/0x92 [Sun Aug 7 13:12:29 2022] ? lock_chain_count+0x20/0x20 [Sun Aug 7 13:12:29 2022] ? unwind_next_frame+0x1c4/0x1b50 [Sun Aug 7 13:12:29 2022] ? secondary_startup_64_no_verify+0xcd/0xdb [Sun Aug 7 13:12:29 2022] ? mlx5e_napi_poll+0x4e9/0x20a0 [mlx5_core] [Sun Aug 7 13:12:29 2022] ? mlx5e_napi_poll+0x4e9/0x20a0 [mlx5_core] [Sun Aug 7 13:12:29 2022] ? stack_access_ok+0x1d0/0x1d0 [Sun Aug 7 13:12:29 2022] ? start_kernel+0x3a7/0x3c5 [Sun Aug 7 13:12:29 2022] __lock_acquire+0x1260/0x6720 [Sun Aug 7 13:12:29 2022] ? lock_chain_count+0x20/0x20 [Sun Aug 7 13:12:29 2022] ? lock_chain_count+0x20/0x20 [Sun Aug 7 13:12:29 2022] ? register_lock_class+0x1880/0x1880 [Sun Aug 7 13:12:29 2022] ? mark_lock.part.0+0xed/0x3060 [Sun Aug 7 13:12:29 2022] ? stack_trace_save+0x91/0xc0 [Sun Aug 7 13:12:29 2022] lock_acquire+0x1c1/0x550 [Sun Aug 7 13:12:29 2022] ? mlx5_lag_is_shared_fdb+0x1f/0x120 [mlx5_core] [Sun Aug 7 13:12:29 2022] ? lockdep_hardirqs_on_prepare+0x400/0x400 [Sun Aug 7 13:12:29 2022] ? __lock_acquire+0xd6f/0x6720 [Sun Aug 7 13:12:29 2022] _raw_spin_lock+0x2c/0x40 [Sun Aug 7 13:12:29 2022] ? mlx5_lag_is_shared_fdb+0x1f/0x120 [mlx5_core] [Sun Aug 7 13:12:29 2022] mlx5_lag_is_shared_fdb+0x1f/0x120 [mlx5_core] [Sun Aug 7 13:12:29 2022] mlx5_esw_bridge_rep_vport_num_vhca_id_get+0x1a0/0x600 [mlx5_core] [Sun Aug 7 13:12:29 2022] ? mlx5_esw_bridge_update_work+0x90/0x90 [mlx5_core] [Sun Aug 7 13:12:29 2022] ? lock_acquire+0x1c1/0x550 [Sun Aug 7 13:12:29 2022] mlx5_esw_bridge_switchdev_event+0x185/0x8f0 [mlx5_core] [Sun Aug 7 13:12:29 2022] ? mlx5_esw_bridge_port_obj_attr_set+0x3e0/0x3e0 [mlx5_core] [Sun Aug 7 13:12:29 2022] ? check_chain_key+0x24a/0x580 [Sun Aug 7 13:12:29 2022] atomic_notifier_call_chain+0xd7/0x1d0 [Sun Aug 7 13:12:29 2022] br_switchdev_fdb_notify+0xea/0x100 [Sun Aug 7 13:12:29 2022] ? br_switchdev_set_port_flag+0x310/0x310 [Sun Aug 7 13:12:29 2022] fdb_notify+0x11b/0x150 [Sun Aug 7 13:12:29 2022] br_fdb_update+0x34c/0x570 [Sun Aug 7 13:12:29 2022] ? lock_chain_count+0x20/0x20 [Sun Aug 7 13:12:29 2022] ? br_fdb_add_local+0x50/0x50 [Sun Aug 7 13:12:29 2022] ? br_allowed_ingress+0x5f/0x1070 [Sun Aug 7 13:12:29 2022] ? check_chain_key+0x24a/0x580 [Sun Aug 7 13:12:29 2022] br_handle_frame_finish+0x786/0x18e0 [Sun Aug 7 13:12:29 2022] ? check_chain_key+0x24a/0x580 [Sun Aug 7 13:12:29 2022] ? br_handle_local_finish+0x20/0x20 [Sun Aug 7 13:12:29 2022] ? __lock_acquire+0xd6f/0x6720 [Sun Aug 7 13:12:29 2022] ? sctp_inet_bind_verify+0x4d/0x190 [Sun Aug 7 13:12:29 2022] ? xlog_unpack_data+0x2e0/0x310 [Sun Aug 7 13:12:29 2022] ? br_handle_local_finish+0x20/0x20 [Sun Aug 7 13:12:29 2022] br_nf_hook_thresh+0x227/0x380 [br_netfilter] [Sun Aug 7 13:12:29 2022] ? setup_pre_routing+0x460/0x460 [br_netfilter] [Sun Aug 7 13:12:29 2022] ? br_handle_local_finish+0x20/0x20 [Sun Aug 7 13:12:29 2022] ? br_nf_pre_routing_ipv6+0x48b/0x69c [br_netfilter] [Sun Aug 7 13:12:29 2022] br_nf_pre_routing_finish_ipv6+0x5c2/0xbf0 [br_netfilter] [Sun Aug 7 13:12:29 2022] ? br_handle_local_finish+0x20/0x20 [Sun Aug 7 13:12:29 2022] br_nf_pre_routing_ipv6+0x4c6/0x69c [br_netfilter] [Sun Aug 7 13:12:29 2022] ? br_validate_ipv6+0x9e0/0x9e0 [br_netfilter] [Sun Aug 7 13:12:29 2022] ? br_nf_forward_arp+0xb70/0xb70 [br_netfilter] [Sun Aug 7 13:12:29 2022] ? br_nf_pre_routing+0xacf/0x1160 [br_netfilter] [Sun Aug 7 13:12:29 2022] br_handle_frame+0x8a9/0x1270 [Sun Aug 7 13:12:29 2022] ? br_handle_frame_finish+0x18e0/0x18e0 [Sun Aug 7 13:12:29 2022] ? register_lock_class+0x1880/0x1880 [Sun Aug 7 13:12:29 2022] ? br_handle_local_finish+0x20/0x20 [Sun Aug 7 13:12:29 2022] ? bond_handle_frame+0xf9/0xac0 [bonding] [Sun Aug 7 13:12:29 2022] ? br_handle_frame_finish+0x18e0/0x18e0 [Sun Aug 7 13:12:29 2022] __netif_receive_skb_core+0x7c0/0x2c70 [Sun Aug 7 13:12:29 2022] ? check_chain_key+0x24a/0x580 [Sun Aug 7 13:12:29 2022] ? generic_xdp_tx+0x5b0/0x5b0 [Sun Aug 7 13:12:29 2022] ? __lock_acquire+0xd6f/0x6720 [Sun Aug 7 13:12:29 2022] ? register_lock_class+0x1880/0x1880 [Sun Aug 7 13:12:29 2022] ? check_chain_key+0x24a/0x580 [Sun Aug 7 13:12:29 2022] __netif_receive_skb_list_core+0x2d7/0x8a0 [Sun Aug 7 13:12:29 2022] ? lock_acquire+0x1c1/0x550 [Sun Aug 7 13:12:29 2022] ? process_backlog+0x960/0x960 [Sun Aug 7 13:12:29 2022] ? lockdep_hardirqs_on_prepare+0x129/0x400 [Sun Aug 7 13:12:29 2022] ? kvm_clock_get_cycles+0x14/0x20 [Sun Aug 7 13:12:29 2022] netif_receive_skb_list_internal+0x5f4/0xd60 [Sun Aug 7 13:12:29 2022] ? do_xdp_generic+0x150/0x150 [Sun Aug 7 13:12:29 2022] ? mlx5e_poll_rx_cq+0xf6b/0x2960 [mlx5_core] [Sun Aug 7 13:12:29 2022] ? mlx5e_poll_ico_cq+0x3d/0x1590 [mlx5_core] [Sun Aug 7 13:12:29 2022] napi_complete_done+0x188/0x710 [Sun Aug 7 13:12:29 2022] mlx5e_napi_poll+0x4e9/0x20a0 [mlx5_core] [Sun Aug 7 13:12:29 2022] ? __queue_work+0x53c/0xeb0 [Sun Aug 7 13:12:29 2022] __napi_poll+0x9f/0x540 [Sun Aug 7 13:12:29 2022] net_rx_action+0x420/0xb70 [Sun Aug 7 13:12:29 2022] ? napi_threaded_poll+0x470/0x470 [Sun Aug 7 13:12:29 2022] ? __common_interrupt+0x79/0x1a0 [Sun Aug 7 13:12:29 2022] __do_softirq+0x271/0x92c [Sun Aug 7 13:12:29 2022] irq_exit_rcu+0x11a/0x170 [Sun Aug 7 13:12:29 2022] common_interrupt+0x7d/0xa0 [Sun Aug 7 13:12:29 2022] </IRQ> [Sun Aug 7 13:12:29 2022] <TASK> [Sun Aug 7 13:12:29 2022] asm_common_interrupt+0x22/0x40 [Sun Aug 7 13:12:29 2022] RIP: 0010:default_idle+0x42/0x60 [Sun Aug 7 13:12:29 2022] Code: c1 83 e0 07 48 c1 e9 03 83 c0 03 0f b6 14 11 38 d0 7c 04 84 d2 75 14 8b 05 6b f1 22 02 85 c0 7e 07 0f 00 2d 80 3b 4a 00 fb f4 <c3> 48 c7 c7 e0 07 7e 85 e8 21 bd 40 fe eb de 66 66 2e 0f 1f 84 00 [Sun Aug 7 13:12:29 2022] RSP: 0018:ffffffff84407e18 EFLAGS: 00000242 [Sun Aug 7 13:12:29 2022] RAX: 0000000000000001 RBX: ffffffff84ec4a68 RCX: 1ffffffff0afc0fc [Sun Aug 7 13:12:29 2022] RDX: 0000000000000004 RSI: 0000000000000000 RDI: ffffffff835b1fac [Sun Aug 7 13:12:29 2022] RBP: 0000000000000000 R08: 0000000000000001 R09: ffff8884d2c44ac3 [Sun Aug 7 13:12:29 2022] R10: ffffed109a588958 R11: 00000000ffffffff R12: 0000000000000000 [Sun Aug 7 13:12:29 2022] R13: ffffffff84efac20 R14: 0000000000000000 R15: dffffc0000000000 [Sun Aug 7 13:12:29 2022] ? default_idle_call+0xcc/0x460 [Sun Aug 7 13:12:29 2022] default_idle_call+0xec/0x460 [Sun Aug 7 13:12:29 2022] do_idle+0x394/0x450 [Sun Aug 7 13:12:29 2022] ? arch_cpu_idle_exit+0x40/0x40 [Sun Aug 7 13:12:29 2022] cpu_startup_entry+0x19/0x20 [Sun Aug 7 13:12:29 2022] rest_init+0x156/0x250 [Sun Aug 7 13:12:29 2022] arch_call_rest_init+0xf/0x15 [Sun Aug 7 13:12:29 2022] start_kernel+0x3a7/0x3c5 [Sun Aug 7 13:12:29 2022] secondary_startup_64_no_verify+0xcd/0xdb [Sun Aug 7 13:12:29 2022] </TASK> Fixes: ff9b7521 ("net/mlx5: Bridge, support LAG") Signed-off-by:
Vlad Buslov <vladbu@nvidia.com> Reviewed-by:
Mark Bloch <mbloch@nvidia.com> Signed-off-by:
Saeed Mahameed <saeedm@nvidia.com>
-
Eli Cohen authored
Make sure to modify the rule for uplink forwarding only for the case where destination vport number is MLX5_VPORT_UPLINK. Fixes: 94db3317 ("net/mlx5: Support multiport eswitch mode") Signed-off-by:
Eli Cohen <elic@nvidia.com> Reviewed-by:
Maor Dickman <maord@nvidia.com> Signed-off-by:
Saeed Mahameed <saeedm@nvidia.com>
-