- Sep 03, 2021
-
-
Davide Caratti authored
[ Upstream commit cd9b50ad ] While running kselftests, Hangbin observed that sch_ets.sh often crashes, and splats like the following one are seen in the output of 'dmesg': BUG: kernel NULL pointer dereference, address: 0000000000000000 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 159f12067 P4D 159f12067 PUD 159f13067 PMD 0 Oops: 0000 [#1] SMP NOPTI CPU: 2 PID: 921 Comm: tc Not tainted 5.14.0-rc6+ #458 Hardware name: Red Hat KVM, BIOS 1.11.1-4.module+el8.1.0+4066+0f1aadab 04/01/2014 RIP: 0010:__list_del_entry_valid+0x2d/0x50 Code: 48 8b 57 08 48 b9 00 01 00 00 00 00 ad de 48 39 c8 0f 84 ac 6e 5b 00 48 b9 22 01 00 00 00 00 ad de 48 39 ca 0f 84 cf 6e 5b 00 <48> 8b 32 48 39 fe 0f 85 af 6e 5b 00 48 8b 50 08 48 39 f2 0f 85 94 RSP: 0018:ffffb2da005c3890 EFLAGS: 00010217 RAX: 0000000000000000 RBX: ffff9073ba23f800 RCX: dead000000000122 RDX: 0000000000000000 RSI: 0000000000000008 RDI: ffff9073ba23fbc8 RBP: ffff9073ba23f890 R08: 0000000000000001 R09: 0000000000000001 R10: 0000000000000001 R11: 0000000000000001 R12: dead000000000100 R13: ffff9073ba23fb00 R14: 0000000000000002 R15: 0000000000000002 FS: 00007f93e5564e40(0000) GS:ffff9073bba00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000000 CR3: 000000014ad34000 CR4: 0000000000350ee0 Call Trace: ets_qdisc_reset+0x6e/0x100 [sch_ets] qdisc_reset+0x49/0x1d0 tbf_reset+0x15/0x60 [sch_tbf] qdisc_reset+0x49/0x1d0 dev_reset_queue.constprop.42+0x2f/0x90 dev_deactivate_many+0x1d3/0x3d0 dev_deactivate+0x56/0x90 qdisc_graft+0x47e/0x5a0 tc_get_qdisc+0x1db/0x3e0 rtnetlink_rcv_msg+0x164/0x4c0 netlink_rcv_skb+0x50/0x100 netlink_unicast+0x1a5/0x280 netlink_sendmsg+0x242/0x480 sock_sendmsg+0x5b/0x60 ____sys_sendmsg+0x1f2/0x260 ___sys_sendmsg+0x7c/0xc0 __sys_sendmsg+0x57/0xa0 do_syscall_64+0x3a/0x80 entry_SYSCALL_64_after_hwframe+0x44/0xae RIP: 0033:0x7f93e44b8338 Code: 89 02 48 c7 c0 ff ff ff ff eb b5 0f 1f 80 00 00 00 00 f3 0f 1e fa 48 8d 05 25 43 2c 00 8b 00 85 c0 75 17 b8 2e 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 58 c3 0f 1f 80 00 00 00 00 41 54 41 89 d4 55 RSP: 002b:00007ffc0db737a8 EFLAGS: 00000246 ORIG_RAX: 000000000000002e RAX: ffffffffffffffda RBX: 0000000061255c06 RCX: 00007f93e44b8338 RDX: 0000000000000000 RSI: 00007ffc0db73810 RDI: 0000000000000003 RBP: 0000000000000000 R08: 0000000000000001 R09: 0000000000000000 R10: 000000000000000b R11: 0000000000000246 R12: 0000000000000001 R13: 0000000000687880 R14: 0000000000000000 R15: 0000000000000000 Modules linked in: sch_ets sch_tbf dummy rfkill iTCO_wdt iTCO_vendor_support intel_rapl_msr intel_rapl_common joydev i2c_i801 pcspkr i2c_smbus lpc_ich virtio_balloon ip_tables xfs libcrc32c crct10dif_pclmul crc32_pclmul crc32c_intel ahci libahci ghash_clmulni_intel libata serio_raw virtio_blk virtio_console virtio_net net_failover failover sunrpc dm_mirror dm_region_hash dm_log dm_mod CR2: 0000000000000000 When the change() function decreases the value of 'nstrict', we must take into account that packets might be already enqueued on a class that flips from 'strict' to 'quantum': otherwise that class will not be added to the bandwidth-sharing list. Then, a call to ets_qdisc_reset() will attempt to do list_del(&alist) with 'alist' filled with zero, hence the NULL pointer dereference. For classes flipping from 'strict' to 'quantum', initialize an empty list and eventually add it to the bandwidth-sharing list, if there are packets already enqueued. In this way, the kernel will: a) prevent crashing as described above. b) avoid retaining the backlog packets (for an arbitrarily long time) in case no packet is enqueued after a change from 'strict' to 'quantum'. Reported-by: Hangbin Liu <liuhangbin@gmail.com> Fixes: dcc68b4d ("net: sch_ets: Add a new Qdisc") Signed-off-by: Davide Caratti <dcaratti@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Alexey Gladkov authored
[ Upstream commit bbb6d0f3 ] We need to increment the ucounts reference counter befor security_prepare_creds() because this function may fail and abort_creds() will try to decrement this reference. [ 96.465056][ T8641] FAULT_INJECTION: forcing a failure. [ 96.465056][ T8641] name fail_page_alloc, interval 1, probability 0, space 0, times 0 [ 96.478453][ T8641] CPU: 1 PID: 8641 Comm: syz-executor668 Not tainted 5.14.0-rc6-syzkaller #0 [ 96.487215][ T8641] Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 [ 96.497254][ T8641] Call Trace: [ 96.500517][ T8641] dump_stack_lvl+0x1d3/0x29f [ 96.505758][ T8641] ? show_regs_print_info+0x12/0x12 [ 96.510944][ T8641] ? log_buf_vmcoreinfo_setup+0x498/0x498 [ 96.516652][ T8641] should_fail+0x384/0x4b0 [ 96.521141][ T8641] prepare_alloc_pages+0x1d1/0x5a0 [ 96.526236][ T8641] __alloc_pages+0x14d/0x5f0 [ 96.530808][ T8641] ? __rmqueue_pcplist+0x2030/0x2030 [ 96.536073][ T8641] ? lockdep_hardirqs_on_prepare+0x3e2/0x750 [ 96.542056][ T8641] ? alloc_pages+0x3f3/0x500 [ 96.546635][ T8641] allocate_slab+0xf1/0x540 [ 96.551120][ T8641] ___slab_alloc+0x1cf/0x350 [ 96.555689][ T8641] ? kzalloc+0x1d/0x30 [ 96.559740][ T8641] __kmalloc+0x2e7/0x390 [ 96.563980][ T8641] ? kzalloc+0x1d/0x30 [ 96.568029][ T8641] kzalloc+0x1d/0x30 [ 96.571903][ T8641] security_prepare_creds+0x46/0x220 [ 96.577174][ T8641] prepare_creds+0x411/0x640 [ 96.581747][ T8641] __sys_setfsuid+0xe2/0x3a0 [ 96.586333][ T8641] do_syscall_64+0x3d/0xb0 [ 96.590739][ T8641] entry_SYSCALL_64_after_hwframe+0x44/0xae [ 96.596611][ T8641] RIP: 0033:0x445a69 [ 96.600483][ T8641] Code: 28 00 00 00 75 05 48 83 c4 28 c3 e8 11 15 00 00 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b8 ff ff ff f7 d8 64 89 01 48 [ 96.620152][ T8641] RSP: 002b:00007f1054173318 EFLAGS: 00000246 ORIG_RAX: 000000000000007a [ 96.628543][ T8641] RAX: ffffffffffffffda RBX: 00000000004ca4c8 RCX: 0000000000445a69 [ 96.636600][ T8641] RDX: 0000000000000010 RSI: 00007f10541732f0 RDI: 0000000000000000 [ 96.644550][ T8641] RBP: 00000000004ca4c0 R08: 0000000000000001 R09: 0000000000000000 [ 96.652500][ T8641] R10: 0000000000000000 R11: 0000000000000246 R12: 00000000004ca4cc [ 96.660631][ T8641] R13: 00007fffffe0b62f R14: 00007f1054173400 R15: 0000000000022000 Fixes: 905ae01c ("Add a reference to ucounts for each cred") Reported-by: <syzbot+01985d7909f9468f013c@syzkaller.appspotmail.com> Signed-off-by: Alexey Gladkov <legion@kernel.org> Link: https://lkml.kernel.org/r/97433b1742c3331f02ad92de5a4f07d673c90613.1629735352.git.legion@kernel.org Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Maxim Kiselev authored
[ Upstream commit 359f4cdd ] According to Armada XP datasheet bit at 0 position is corresponding for TxInProg indication. Fixes: c5aff182 ("net: mvneta: driver for Marvell Armada 370/XP network unit") Signed-off-by: Maxim Kiselev <bigunclemax@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Christophe JAILLET authored
[ Upstream commit 5ed74b03 ] A successful 'xge_mdio_config()' call should be balanced by a corresponding 'xge_mdio_remove()' call in the error handling path of the probe, as already done in the remove function. Update the error handling path accordingly. Fixes: ea8ab16a ("drivers: net: xgene-v2: Add MDIO support") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Shreyansh Chouhan authored
[ Upstream commit 1d011c48 ] Validate csum_start in gre_handle_offloads before we call _gre_xmit so that we do not crash later when the csum_start value is used in the lco_csum function call. This patch deals with ipv4 code. Fixes: c5441932 ("GRE: Refactor GRE tunneling code.") Reported-by: <syzbot+ff8e1b9f2f36481e2efc@syzkaller.appspotmail.com> Signed-off-by: Shreyansh Chouhan <chouhan.shreyansh630@gmail.com> Reviewed-by: Willem de Bruijn <willemb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Gal Pressman authored
[ Upstream commit dbe986bd ] Make sure to free the IRQ vectors in case the allocation doesn't return the expected number of IRQs. Fixes: b7f5e880 ("RDMA/efa: Add the efa module") Link: https://lore.kernel.org/r/20210811151131.39138-2-galpress@amazon.com Reviewed-by: Firas JahJah <firasj@amazon.com> Reviewed-by: Yossi Leybovich <sleybo@amazon.com> Signed-off-by: Gal Pressman <galpress@amazon.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Sasha Neftin authored
[ Upstream commit 4051f683 ] On new platforms, the NVM is read-only. Attempting to update the NVM is causing a lockup to occur. Do not attempt to write to the NVM on platforms where it's not supported. Emit an error message when the NVM checksum is invalid. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=213667 Fixes: fb776f5d ("e1000e: Add support for Tiger Lake") Suggested-by: Dima Ruinskiy <dima.ruinskiy@intel.com> Suggested-by: Vitaly Lifshits <vitaly.lifshits@intel.com> Signed-off-by: Sasha Neftin <sasha.neftin@intel.com> Tested-by: Dvora Fuxbrumer <dvorax.fuxbrumer@linux.intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Sasha Neftin authored
[ Upstream commit 44a13a5d ] We should decode the latency and the max_latency before directly compare. The latency should be presented as lat_enc = scale x value: lat_enc_d = (lat_enc & 0x0x3ff) x (1U << (5*((max_ltr_enc & 0x1c00) >> 10))) Fixes: cf8fb73c ("e1000e: add support for LTR on I217/I218") Suggested-by: Yee Li <seven.yi.lee@gmail.com> Signed-off-by: Sasha Neftin <sasha.neftin@intel.com> Tested-by: Dvora Fuxbrumer <dvorax.fuxbrumer@linux.intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Toshiki Nishioka authored
[ Upstream commit 691bd4d7 ] Use num_tx_queues rather than the IGC_MAX_TX_QUEUES fixed number 4 when iterating over tx_ring queue since instantiated queue count could be less than 4 where on-line cpu count is less than 4. Fixes: ec50a9d4 ("igc: Add support for taprio offloading") Signed-off-by: Toshiki Nishioka <toshiki.nishioka@intel.com> Signed-off-by: Muhammad Husaini Zulkifli <muhammad.husaini.zulkifli@intel.com> Tested-by: Muhammad Husaini Zulkifli <muhammad.husaini.zulkifli@intel.com> Acked-by: Sasha Neftin <sasha.neftin@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Aaron Ma authored
[ Upstream commit 4b799595 ] After unplug thunderbolt dock with i225, pciehp interrupt is triggered, remove call will read/write mmio address which is already disconnected, then cause page fault and make system hang. Check PCI state to remove device safely. Trace: BUG: unable to handle page fault for address: 000000000000b604 Oops: 0000 [#1] SMP NOPTI RIP: 0010:igc_rd32+0x1c/0x90 [igc] Call Trace: igc_ptp_suspend+0x6c/0xa0 [igc] igc_ptp_stop+0x12/0x50 [igc] igc_remove+0x7f/0x1c0 [igc] pci_device_remove+0x3e/0xb0 __device_release_driver+0x181/0x240 Fixes: 13b5b7fd ("igc: Add support for Tx/Rx rings") Fixes: b03c49cd ("igc: Save PTP time before a reset") Signed-off-by: Aaron Ma <aaron.ma@canonical.com> Tested-by: Dvora Fuxbrumer <dvorax.fuxbrumer@linux.intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Petko Manolov authored
[ Upstream commit ffc9c3eb ] - restore the behavior in enable_net_traffic() to avoid regressions - Jakub Kicinski; - hurried up and removed redundant assignment in pegasus_open() before yet another checker complains; Fixes: 8a160e2e ("net: usb: pegasus: Check the return value of get_geristers() and friends;") Reported-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Petko Manolov <petko.manolov@konsulko.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Jacob Keller authored
[ Upstream commit a8f89fa2 ] The devlink dev info command reports version information about the device and firmware running on the board. This includes the "board.id" field which is supposed to represent an identifier of the board design. The ice driver uses the Product Board Assembly identifier for this. In some cases, the PBA is not present in the NVM. If this happens, devlink dev info will fail with an error. Instead, modify the ice_info_pba function to just exit without filling in the context buffer. This will cause the board.id field to be skipped. Log a dev_dbg message in case someone wants to confirm why board.id is not showing up for them. Fixes: e961b679 ("ice: add board identifier info to devlink .info_get") Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Tony Brelinski <tonyx.brelinski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Link: https://lore.kernel.org/r/20210819223451.245613-1-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Bob Pearson authored
[ Upstream commit 65a81b61 ] rxe_mcast_add_grp_elem() in rxe_mcast.c calls rxe_alloc() while holding spinlocks which in turn calls kzalloc(size, GFP_KERNEL) which is incorrect. This patch replaces rxe_alloc() by rxe_alloc_locked() which uses GFP_ATOMIC. This bug was caused by the below mentioned commit and failing to handle the need for the atomic allocate. Fixes: 4276fd0d ("RDMA/rxe: Remove RXE_POOL_ATOMIC") Link: https://lore.kernel.org/r/20210813210625.4484-1-rpearsonhpe@gmail.com Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Bob Pearson <rpearsonhpe@gmail.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Dinghao Liu authored
[ Upstream commit a036ad08 ] The fixed commit removes all rtnl_lock() and rtnl_unlock() calls in function bnxt_re_dev_init(), but forgets to remove a rtnl_unlock() in the error handling path of bnxt_re_register_netdev(), which may cause a deadlock. This bug is suggested by a static analysis tool. Fixes: c2b777a9 ("RDMA/bnxt_re: Refactor device add/remove functionalities") Link: https://lore.kernel.org/r/20210816085531.12167-1-dinghao.liu@zju.edu.cn Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn> Acked-by: Selvin Xavier <selvin.xavier@broadcom.com> Reviewed-by: Jason Gunthorpe <jgg@nvidia.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Tuo Li authored
[ Upstream commit cbe71c61 ] kmalloc_array() is called to allocate memory for tx->descp. If it fails, the function __sdma_txclean() is called: __sdma_txclean(dd, tx); However, in the function __sdma_txclean(), tx-descp is dereferenced if tx->num_desc is not zero: sdma_unmap_desc(dd, &tx->descp[0]); To fix this possible null-pointer dereference, assign the return value of kmalloc_array() to a local variable descp, and then assign it to tx->descp if it is not NULL. Otherwise, go to enomem. Fixes: 77241056 ("IB/hfi1: add driver files") Link: https://lore.kernel.org/r/20210806133029.194964-1-islituo@gmail.com Reported-by: TOTE Robot <oslab@tsinghua.edu.cn> Signed-off-by: Tuo Li <islituo@gmail.com> Tested-by: Mike Marciniszyn <mike.marciniszyn@cornelisnetworks.com> Acked-by: Mike Marciniszyn <mike.marciniszyn@cornelisnetworks.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Naresh Kumar PBS authored
[ Upstream commit 17f2569d ] Add the missing initialization of srq lock. Fixes: 37cb11ac ("RDMA/bnxt_re: Add SRQ support for Broadcom adapters") Link: https://lore.kernel.org/r/1629343553-5843-3-git-send-email-selvin.xavier@broadcom.com Signed-off-by: Naresh Kumar PBS <nareshkumar.pbs@broadcom.com> Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Gal Pressman authored
[ Upstream commit f6018cc4 ] The dmabuf memory registrations are missing the restrack handling and hence do not appear in rdma tool. Fixes: bfe0cc6e ("RDMA/uverbs: Add uverbs command for dma-buf based MR registration") Link: https://lore.kernel.org/r/20210812135607.6228-1-galpress@amazon.com Signed-off-by: Gal Pressman <galpress@amazon.com> Reviewed-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Maor Gottlieb authored
[ Upstream commit da78fe5f ] Fix the below crash when deleting a slave from the unaffiliated list twice. First time when the slave is bound to the master and the second when the slave is unloaded. Fix it by checking if slave is unaffiliated (doesn't have ib device) before removing from the list. RIP: 0010:mlx5r_mp_remove+0x4e/0xa0 [mlx5_ib] Call Trace: auxiliary_bus_remove+0x18/0x30 __device_release_driver+0x177/x220 device_release_driver+0x24/0x30 bus_remove_device+0xd8/0x140 device_del+0x18a/0x3e0 mlx5_rescan_drivers_locked+0xa9/0x210 [mlx5_core] mlx5_unregister_device+0x34/0x60 [mlx5_core] mlx5_uninit_one+0x32/0x100 [mlx5_core] remove_one+0x6e/0xe0 [mlx5_core] pci_device_remove+0x36/0xa0 __device_release_driver+0x177/0x220 device_driver_detach+0x3c/0xa0 unbind_store+0x113/0x130 kernfs_fop_write_iter+0x110/0x1a0 new_sync_write+0x116/0x1a0 vfs_write+0x1ba/0x260 ksys_write+0x5f/0xe0 do_syscall_64+0x3d/0x90 entry_SYSCALL_64_after_hwframe+0x44/0xae Fixes: 93f82444 ("RDMA/mlx5: Convert mlx5_ib to use auxiliary bus") Link: https://lore.kernel.org/r/17ec98989b0ba88f7adfbad68eb20bce8d567b44.1628587493.git.leonro@nvidia.com Signed-off-by: Maor Gottlieb <maorg@nvidia.com> Signed-off-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Li Jinlin authored
commit 02c6dcd5 upstream. We found a hang, the steps to reproduce are as follows: 1. blocking device via scsi_device_set_state() 2. dd if=/dev/sda of=/mnt/t.log bs=1M count=10 3. echo none > /sys/block/sda/queue/scheduler 4. echo "running" >/sys/block/sda/device/state Step 3 and 4 should complete after step 4, but they hang. CPU#0 CPU#1 CPU#2 --------------- ---------------- ---------------- Step 1: blocking device Step 2: dd xxxx ^^^^^^ get request q_usage_counter++ Step 3: switching scheculer elv_iosched_store elevator_switch blk_mq_freeze_queue blk_freeze_queue > blk_freeze_queue_start ^^^^^^ mq_freeze_depth++ > blk_mq_run_hw_queues ^^^^^^ can't run queue when dev blocked > blk_mq_freeze_queue_wait ^^^^^^ Hang here!!! wait q_usage_counter==0 Step 4: running device store_state_field scsi_rescan_device scsi_attach_vpd scsi_vpd_inquiry __scsi_execute blk_get_request blk_mq_alloc_request blk_queue_enter ^^^^^^ Hang here!!! wait mq_freeze_depth==0 blk_mq_run_hw_queues ^^^^^^ dispatch IO, q_usage_counter will reduce to zero blk_mq_unfreeze_queue ^^^^^ mq_freeze_depth-- To fix this, we need to run queue before rescanning device when the device state changes to SDEV_RUNNING. Link: https://lore.kernel.org/r/20210824025921.3277629-1-lijinlin3@huawei.com Fixes: f0f82e24 ("scsi: core: Fix capacity set to zero after offlinining device") Reviewed-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Li Jinlin <lijinlin3@huawei.com> Signed-off-by: Qiu Laibin <qiulaibin@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Wesley Cheng authored
commit 4a1e25c0 upstream. During a USB cable disconnect, or soft disconnect scenario, a pending SETUP transaction may not be completed, leading to the following error: dwc3 a600000.dwc3: timed out waiting for SETUP phase If this occurs, then the entire pullup disable routine is skipped and proper cleanup and halting of the controller does not complete. Instead of returning an error (which is ignored from the UDC perspective), allow the pullup disable routine to continue, which will also handle disabling of EP0/1. This will end any active transfers as well. Ensure to clear any delayed_status also, as the timeout could happen within the STATUS stage. Fixes: bb014736 ("usb: dwc3: gadget: don't clear RUN/STOP when it's invalid to do so") Cc: <stable@vger.kernel.org> Reviewed-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com> Acked-by: Felipe Balbi <balbi@kernel.org> Signed-off-by: Wesley Cheng <wcheng@codeaurora.org> Link: https://lore.kernel.org/r/20210825042855.7977-1-wcheng@codeaurora.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Thinh Nguyen authored
commit 51f1954a upstream. We can't depend on the TRB's HWO bit to determine if the TRB ring is "full". A TRB is only available when the driver had processed it, not when the controller consumed and relinquished the TRB's ownership to the driver. Otherwise, the driver may overwrite unprocessed TRBs. This can happen when many transfer events accumulate and the system is slow to process them and/or when there are too many small requests. If a request is in the started_list, that means there is one or more unprocessed TRBs remained. Check this instead of the TRB's HWO bit whether the TRB ring is full. Fixes: c4233573 ("usb: dwc3: gadget: prepare TRBs on update transfers too") Cc: <stable@vger.kernel.org> Acked-by: Felipe Balbi <balbi@kernel.org> Signed-off-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com> Link: https://lore.kernel.org/r/e91e975affb0d0d02770686afc3a5b9eb84409f6.1629335416.git.Thinh.Nguyen@synopsys.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Kyle Tso authored
commit ef52b4a9 upstream. If the port is going to send Discover_Identity Message, vdm_sm_running flag was intentionally set before entering Ready States in order to avoid the conflict because the port and the port partner might start AMS at almost the same time after entering Ready States. However, the original design has a problem. When the port is doing DR_SWAP from Device to Host, it raises the flag. Later in the tcpm_send_discover_work, the flag blocks the procedure of sending the Discover_Identity and it might never be cleared until disconnection. Since there exists another flag send_discover representing that the port is going to send Discover_Identity or not, it is enough to use that flag to prevent the conflict. Also change the timing of the set/clear of vdm_sm_running to indicate whether the VDM SM is actually running or not. Fixes: c34e85fa ("usb: typec: tcpm: Send DISCOVER_IDENTITY from dedicated work") Cc: stable <stable@vger.kernel.org> Cc: Badhri Jagan Sridharan <badhri@google.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by: Kyle Tso <kyletso@google.com> Link: https://lore.kernel.org/r/20210826124201.1562502-1-kyletso@google.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Takashi Iwai authored
commit c82cacd2 upstream. The recent attempt to handle an unknown ROM state in the commit d143825b ("usb: renesas-xhci: Fix handling of unknown ROM state") resulted in a regression and reverted later by the commit 44cf5360 ("Revert "usb: renesas-xhci: Fix handling of unknown ROM state""). The problem of the former fix was that it treated the failure of firmware loading as a fatal error. Since the firmware files aren't included in the standard linux-firmware tree, most users don't have them, hence they got the non-working system after that. The revert fixed the regression, but also it didn't make the firmware loading triggered even on the devices that do need it. So we need still a fix for them. This is another attempt to handle the unknown ROM state. Like the previous fix, this also tries to load the firmware when ROM shows unknown state. In this patch, however, the failure of a firmware loading (such as a missing firmware file) isn't handled as a fatal error any longer when ROM has been already detected, but it falls back to the ROM mode like before. The error is returned only when no ROM is detected and the firmware loading failed. Along with it, for simplifying the code flow, the detection and the check of ROM is factored out from renesas_fw_check_running() and done in the caller side, renesas_xhci_check_request_fw(). It avoids the redundant ROM checks. The patch was tested on Lenovo Thinkpad T14 gen (BIOS 1.34). Also it was confirmed that no regression is seen on another Thinkpad T14 machine that has worked without the patch, too. Fixes: 44cf5360 ("Revert "usb: renesas-xhci: Fix handling of unknown ROM state"") Cc: stable <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de> BugLink: https://bugzilla.opensuse.org/show_bug.cgi?id=1189207 Link: https://lore.kernel.org/r/20210826124127.14789-1-tiwai@suse.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Zhengjun Zhang authored
commit 2829a4e3 upstream. Fibocom FG150 is a 5G module based on Qualcomm SDX55 platform, support Sub-6G band. Here are the outputs of lsusb -v and usb-devices: > T: Bus=02 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 2 Spd=5000 MxCh= 0 > D: Ver= 3.20 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 9 #Cfgs= 1 > P: Vendor=2cb7 ProdID=010b Rev=04.14 > S: Manufacturer=Fibocom > S: Product=Fibocom Modem_SN:XXXXXXXX > S: SerialNumber=XXXXXXXX > C: #Ifs= 5 Cfg#= 1 Atr=a0 MxPwr=896mA > I: If#=0x0 Alt= 0 #EPs= 1 Cls=ef(misc ) Sub=04 Prot=01 Driver=rndis_host > I: If#=0x1 Alt= 0 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=rndis_host > I: If#=0x2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none) > I: If#=0x3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=(none) > I: If#=0x4 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=(none) > Bus 002 Device 002: ID 2cb7:010b Fibocom Fibocom Modem_SN:XXXXXXXX > Device Descriptor: > bLength 18 > bDescriptorType 1 > bcdUSB 3.20 > bDeviceClass 0 > bDeviceSubClass 0 > bDeviceProtocol 0 > bMaxPacketSize0 9 > idVendor 0x2cb7 Fibocom > idProduct 0x010b > bcdDevice 4.14 > iManufacturer 1 Fibocom > iProduct 2 Fibocom Modem_SN:XXXXXXXX > iSerial 3 XXXXXXXX > bNumConfigurations 1 > Configuration Descriptor: > bLength 9 > bDescriptorType 2 > wTotalLength 0x00e6 > bNumInterfaces 5 > bConfigurationValue 1 > iConfiguration 4 RNDIS_DUN_DIAG_ADB > bmAttributes 0xa0 > (Bus Powered) > Remote Wakeup > MaxPower 896mA > Interface Association: > bLength 8 > bDescriptorType 11 > bFirstInterface 0 > bInterfaceCount 2 > bFunctionClass 239 Miscellaneous Device > bFunctionSubClass 4 > bFunctionProtocol 1 > iFunction 7 RNDIS > Interface Descriptor: > bLength 9 > bDescriptorType 4 > bInterfaceNumber 0 > bAlternateSetting 0 > bNumEndpoints 1 > bInterfaceClass 239 Miscellaneous Device > bInterfaceSubClass 4 > bInterfaceProtocol 1 > iInterface 0 > ** UNRECOGNIZED: 05 24 00 10 01 > ** UNRECOGNIZED: 05 24 01 00 01 > ** UNRECOGNIZED: 04 24 02 00 > ** UNRECOGNIZED: 05 24 06 00 01 > Endpoint Descriptor: > bLength 7 > bDescriptorType 5 > bEndpointAddress 0x81 EP 1 IN > bmAttributes 3 > Transfer Type Interrupt > Synch Type None > Usage Type Data > wMaxPacketSize 0x0008 1x 8 bytes > bInterval 9 > bMaxBurst 0 > Interface Descriptor: > bLength 9 > bDescriptorType 4 > bInterfaceNumber 1 > bAlternateSetting 0 > bNumEndpoints 2 > bInterfaceClass 10 CDC Data > bInterfaceSubClass 0 > bInterfaceProtocol 0 > iInterface 0 > Endpoint Descriptor: > bLength 7 > bDescriptorType 5 > bEndpointAddress 0x8e EP 14 IN > bmAttributes 2 > Transfer Type Bulk > Synch Type None > Usage Type Data > wMaxPacketSize 0x0400 1x 1024 bytes > bInterval 0 > bMaxBurst 6 > Endpoint Descriptor: > bLength 7 > bDescriptorType 5 > bEndpointAddress 0x0f EP 15 OUT > bmAttributes 2 > Transfer Type Bulk > Synch Type None > Usage Type Data > wMaxPacketSize 0x0400 1x 1024 bytes > bInterval 0 > bMaxBurst 6 > Interface Descriptor: > bLength 9 > bDescriptorType 4 > bInterfaceNumber 2 > bAlternateSetting 0 > bNumEndpoints 3 > bInterfaceClass 255 Vendor Specific Class > bInterfaceSubClass 0 > bInterfaceProtocol 0 > iInterface 0 > ** UNRECOGNIZED: 05 24 00 10 01 > ** UNRECOGNIZED: 05 24 01 00 00 > ** UNRECOGNIZED: 04 24 02 02 > ** UNRECOGNIZED: 05 24 06 00 00 > Endpoint Descriptor: > bLength 7 > bDescriptorType 5 > bEndpointAddress 0x83 EP 3 IN > bmAttributes 3 > Transfer Type Interrupt > Synch Type None > Usage Type Data > wMaxPacketSize 0x000a 1x 10 bytes > bInterval 9 > bMaxBurst 0 > Endpoint Descriptor: > bLength 7 > bDescriptorType 5 > bEndpointAddress 0x82 EP 2 IN > bmAttributes 2 > Transfer Type Bulk > Synch Type None > Usage Type Data > wMaxPacketSize 0x0400 1x 1024 bytes > bInterval 0 > bMaxBurst 0 > Endpoint Descriptor: > bLength 7 > bDescriptorType 5 > bEndpointAddress 0x01 EP 1 OUT > bmAttributes 2 > Transfer Type Bulk > Synch Type None > Usage Type Data > wMaxPacketSize 0x0400 1x 1024 bytes > bInterval 0 > bMaxBurst 0 > Interface Descriptor: > bLength 9 > bDescriptorType 4 > bInterfaceNumber 3 > bAlternateSetting 0 > bNumEndpoints 2 > bInterfaceClass 255 Vendor Specific Class > bInterfaceSubClass 255 Vendor Specific Subclass > bInterfaceProtocol 48 > iInterface 0 > Endpoint Descriptor: > bLength 7 > bDescriptorType 5 > bEndpointAddress 0x84 EP 4 IN > bmAttributes 2 > Transfer Type Bulk > Synch Type None > Usage Type Data > wMaxPacketSize 0x0400 1x 1024 bytes > bInterval 0 > bMaxBurst 0 > Endpoint Descriptor: > bLength 7 > bDescriptorType 5 > bEndpointAddress 0x02 EP 2 OUT > bmAttributes 2 > Transfer Type Bulk > Synch Type None > Usage Type Data > wMaxPacketSize 0x0400 1x 1024 bytes > bInterval 0 > bMaxBurst 0 > Interface Descriptor: > bLength 9 > bDescriptorType 4 > bInterfaceNumber 4 > bAlternateSetting 0 > bNumEndpoints 2 > bInterfaceClass 255 Vendor Specific Class > bInterfaceSubClass 66 > bInterfaceProtocol 1 > iInterface 0 > Endpoint Descriptor: > bLength 7 > bDescriptorType 5 > bEndpointAddress 0x03 EP 3 OUT > bmAttributes 2 > Transfer Type Bulk > Synch Type None > Usage Type Data > wMaxPacketSize 0x0400 1x 1024 bytes > bInterval 0 > bMaxBurst 0 > Endpoint Descriptor: > bLength 7 > bDescriptorType 5 > bEndpointAddress 0x85 EP 5 IN > bmAttributes 2 > Transfer Type Bulk > Synch Type None > Usage Type Data > wMaxPacketSize 0x0400 1x 1024 bytes > bInterval 0 > bMaxBurst 0 > Binary Object Store Descriptor: > bLength 5 > bDescriptorType 15 > wTotalLength 0x0016 > bNumDeviceCaps 2 > USB 2.0 Extension Device Capability: > bLength 7 > bDescriptorType 16 > bDevCapabilityType 2 > bmAttributes 0x00000006 > BESL Link Power Management (LPM) Supported > SuperSpeed USB Device Capability: > bLength 10 > bDescriptorType 16 > bDevCapabilityType 3 > bmAttributes 0x00 > wSpeedsSupported 0x000f > Device can operate at Low Speed (1Mbps) > Device can operate at Full Speed (12Mbps) > Device can operate at High Speed (480Mbps) > Device can operate at SuperSpeed (5Gbps) > bFunctionalitySupport 1 > Lowest fully-functional device speed is Full Speed (12Mbps) > bU1DevExitLat 1 micro seconds > bU2DevExitLat 500 micro seconds > Device Status: 0x0000 > (Bus Powered) Signed-off-by: Zhengjun Zhang <zhangzhengjun@aicrobo.com> Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Johan Hovold authored
commit df7b16d1 upstream. This reverts commit 3c18e9ba . These devices do not appear to send a zero-length packet when the transfer size is a multiple of the bulk-endpoint max-packet size. This means that incoming data may not be processed by the driver until a short packet is received or the receive buffer is full. Revert back to using endpoint-sized receive buffers to avoid stalled reads. Reported-by: Paul Größel <pb.g@gmx.de> Link: https://bugzilla.kernel.org/show_bug.cgi?id=214131 Fixes: 3c18e9ba ("USB: serial: ch341: fix character loss at high transfer rates") Cc: stable@vger.kernel.org Cc: Willy Tarreau <w@1wt.eu> Link: https://lore.kernel.org/r/20210824121926.19311-1-johan@kernel.org Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Borislav Petkov authored
commit c41a4e87 upstream. Building a randconfig here triggered: ERROR: modpost: "pm_suspend_target_state" [drivers/gpu/drm/amd/amdgpu/amdgpu.ko] undefined! because the module export of that symbol happens in kernel/power/suspend.c which is enabled with CONFIG_SUSPEND. The ifdef guards in amdgpu_acpi_is_s0ix_supported(), however, test for CONFIG_PM_SLEEP which is defined like this: config PM_SLEEP def_bool y depends on SUSPEND || HIBERNATE_CALLBACKS and that randconfig has: # CONFIG_SUSPEND is not set CONFIG_HIBERNATE_CALLBACKS=y leading to the module export missing. Change the ifdeffery to depend directly on CONFIG_SUSPEND. Fixes: 5706cb3c ("drm/amdgpu: fix checking pmops when PM_SLEEP is not enabled") Reviewed-by: Lijo Lazar <lijo.lazar@amd.com> Signed-off-by: Borislav Petkov <bp@suse.de> Link: https://lkml.kernel.org/r/YSP6Lv53QV0cOAsd@zn.tnic Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Christian König authored
commit 2a7b9a84 upstream. For some reason we run into an use case where a BO is already pinned into GTT, but should be pinned into VRAM|GTT again. Handle that case gracefully as well. Reviewed-by: Shashank Sharma <Shashank.sharma@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Michel Dänzer authored
commit 32bc8f83 upstream. schedule_delayed_work does not push back the work if it was already scheduled before, so amdgpu_device_delay_enable_gfx_off ran ~100 ms after the first time GFXOFF was disabled and re-enabled, even if GFXOFF was disabled and re-enabled again during those 100 ms. This resulted in frame drops / stutter with the upcoming mutter 41 release on Navi 14, due to constantly enabling GFXOFF in the HW and disabling it again (for getting the GPU clock counter). To fix this, call cancel_delayed_work_sync when the disable count transitions from 0 to 1, and only schedule the delayed work on the reverse transition, not if the disable count was already 0. This makes sure the delayed work doesn't run at unexpected times, and allows it to be lock-free. v2: * Use cancel_delayed_work_sync & mutex_trylock instead of mod_delayed_work. v3: * Make amdgpu_device_delay_enable_gfx_off lock-free (Christian König) v4: * Fix race condition between amdgpu_gfx_off_ctrl incrementing adev->gfx.gfx_off_req_count and amdgpu_device_delay_enable_gfx_off checking for it to be 0 (Evan Quan) Cc: stable@vger.kernel.org Reviewed-by: Evan Quan <evan.quan@amd.com> Reviewed-by: Lijo Lazar <lijo.lazar@amd.com> # v3 Acked-by: Christian König <christian.koenig@amd.com> # v3 Signed-off-by: Michel Dänzer <mdaenzer@redhat.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Swati Sharma authored
commit 71de496c upstream. drm_dp_dpcd_read/write already has debug error message. Drop redundant error messages which gives false status even if correct value is read in drm_dp_dpcd_read(). v2: -Added fixes tag (Ankit) v3: -Fixed build error (CI) Fixes: 9488a030 ("drm/i915: Add support for enabling link status and recovery") Cc: Ankit Nautiyal <ankit.k.nautiyal@intel.com> Cc: Imre Deak <imre.deak@intel.com> Cc: Jani Nikula <jani.nikula@intel.com> Cc: José Roberto de Souza <jose.souza@intel.com> Cc: Manasi Navare <manasi.d.navare@intel.com> Cc: Sean Paul <seanpaul@chromium.org> Cc: Uma Shankar <uma.shankar@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: <stable@vger.kernel.org> # v5.12+ Reviewed-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Swati Sharma <swati2.sharma@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210812131107.5531-1-swati2.sharma@intel.com (cherry picked from commit b6dfa416 ) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Matthew Brost authored
commit a63bcf08 upstream. A small race exists between intel_gt_retire_requests_timeout and intel_timeline_exit which could result in the syncmap not getting free'd. Rather than work to hard to seal this race, simply cleanup the syncmap on fini. unreferenced object 0xffff88813bc53b18 (size 96): comm "gem_close_race", pid 5410, jiffies 4294917818 (age 1105.600s) hex dump (first 32 bytes): 01 00 00 00 00 00 00 00 00 00 00 00 0a 00 00 00 ................ 00 00 00 00 00 00 00 00 6b 6b 6b 6b 06 00 00 00 ........kkkk.... backtrace: [<00000000120b863a>] __sync_alloc_leaf+0x1e/0x40 [i915] [<00000000042f6959>] __sync_set+0x1bb/0x240 [i915] [<0000000090f0e90f>] i915_request_await_dma_fence+0x1c7/0x400 [i915] [<0000000056a48219>] i915_request_await_object+0x222/0x360 [i915] [<00000000aaac4ee3>] i915_gem_do_execbuffer+0x1bd0/0x2250 [i915] [<000000003c9d830f>] i915_gem_execbuffer2_ioctl+0x405/0xce0 [i915] [<00000000fd7a8e68>] drm_ioctl_kernel+0xb0/0xf0 [drm] [<00000000e721ee87>] drm_ioctl+0x305/0x3c0 [drm] [<000000008b0d8986>] __x64_sys_ioctl+0x71/0xb0 [<0000000076c362a4>] do_syscall_64+0x33/0x80 [<00000000eb7a4831>] entry_SYSCALL_64_after_hwframe+0x44/0xa9 Signed-off-by: Matthew Brost <matthew.brost@intel.com> Fixes: 531958f6 ("drm/i915/gt: Track timeline activeness in enter/exit") Cc: <stable@vger.kernel.org> Reviewed-by: John Harrison <John.C.Harrison@Intel.com> Signed-off-by: John Harrison <John.C.Harrison@Intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210730195342.110234-1-matthew.brost@intel.com (cherry picked from commit faf89098 ) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Song Yoong Siang authored
commit 2b9fff64 upstream. Ensure a valid XSK buffer before proceed to free the xdp buffer. The following kernel panic is observed without this patch: RIP: 0010:xp_free+0x5/0x40 Call Trace: stmmac_napi_poll_rxtx+0x332/0xb30 [stmmac] ? stmmac_tx_timer+0x3c/0xb0 [stmmac] net_rx_action+0x13d/0x3d0 __do_softirq+0xfc/0x2fb ? smpboot_register_percpu_thread+0xe0/0xe0 run_ksoftirqd+0x32/0x70 smpboot_thread_fn+0x1d8/0x2c0 kthread+0x169/0x1a0 ? kthread_park+0x90/0x90 ret_from_fork+0x1f/0x30 ---[ end trace 0000000000000002 ]--- Fixes: bba2556e ("net: stmmac: Enable RX via AF_XDP zero-copy") Cc: <stable@vger.kernel.org> # 5.13.x Suggested-by: Ong Boon Leong <boon.leong.ong@intel.com> Signed-off-by: Song Yoong Siang <yoong.siang.song@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Song Yoong Siang authored
commit a6451192 upstream. After free xsk_pool, there is possibility that napi polling is still running in the middle, thus causes a kernel crash due to kernel NULL pointer dereference of rx_q->xsk_pool and tx_q->xsk_pool. Fix this by changing the XDP pool setup sequence to: 1. disable napi before free xsk_pool 2. enable napi after init xsk_pool The following kernel panic is observed without this patch: RIP: 0010:xsk_uses_need_wakeup+0x5/0x10 Call Trace: stmmac_napi_poll_rxtx+0x3a9/0xae0 [stmmac] __napi_poll+0x27/0x130 net_rx_action+0x233/0x280 __do_softirq+0xe2/0x2b6 run_ksoftirqd+0x1a/0x20 smpboot_thread_fn+0xac/0x140 ? sort_range+0x20/0x20 kthread+0x124/0x150 ? set_kthread_struct+0x40/0x40 ret_from_fork+0x1f/0x30 ---[ end trace a77c8956b79ac107 ]--- Fixes: bba2556e ("net: stmmac: Enable RX via AF_XDP zero-copy") Cc: <stable@vger.kernel.org> # 5.13.x Signed-off-by: Song Yoong Siang <yoong.siang.song@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Qu Wenruo authored
commit 4e965576 upstream. This reverts commit f2165627. [BUG] It's no longer possible to create compressed inline extent after commit f2165627 ("btrfs: compression: don't try to compress if we don't have enough pages"). [CAUSE] For compression code, there are several possible reasons we have a range that needs to be compressed while it's no more than one page. - Compressed inline write The data is always smaller than one sector and the test lacks the condition to properly recognize a non-inline extent. - Compressed subpage write For the incoming subpage compressed write support, we require page alignment of the delalloc range. And for 64K page size, we can compress just one page into smaller sectors. For those reasons, the requirement for the data to be more than one page is not correct, and is already causing regression for compressed inline data writeback. The idea of skipping one page to avoid wasting CPU time could be revisited in the future. [FIX] Fix it by reverting the offending commit. Reported-by: Zygo Blaxell <ce3g8jdj@umail.furryterror.org> Link: https://lore.kernel.org/linux-btrfs/afa2742.c084f5d6.17b6b08dffc@tnonline.net Fixes: f2165627 ("btrfs: compression: don't try to compress if we don't have enough pages") CC: stable@vger.kernel.org # 4.4+ Signed-off-by: Qu Wenruo <wqu@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Miaohe Lin authored
commit 946746d1 upstream. If offline_pages failed after lru_cache_disable(), it forgot to do lru_cache_enable() in error path. So we would have lru cache disabled permanently in this case. Link: https://lkml.kernel.org/r/20210821094246.10149-3-linmiaohe@huawei.com Fixes: d479960e ("mm: disable LRU pagevec during the migration temporarily") Signed-off-by: Miaohe Lin <linmiaohe@huawei.com> Reviewed-by: David Hildenbrand <david@redhat.com> Reviewed-by: Oscar Salvador <osalvador@suse.de> Reviewed-by: Naoya Horiguchi <naoya.horiguchi@nec.com> Cc: Chris Goldsworthy <cgoldswo@codeaurora.org> Cc: Michal Hocko <mhocko@suse.com> Cc: Minchan Kim <minchan@kernel.org> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Lukas Bulwahn authored
commit 310d2e83 upstream. Commit 66f24fa7 ("mm: drop redundant ARCH_ENABLE_SPLIT_PMD_PTLOCK") broke PMD split page table lock for powerpc. It selects the non-existent config ARCH_ENABLE_PMD_SPLIT_PTLOCK in arch/powerpc/platforms/Kconfig.cputype, but clearly intended to select ARCH_ENABLE_SPLIT_PMD_PTLOCK (notice the word swapping!), as that commit did for all other architectures. Fix it by selecting the correct symbol ARCH_ENABLE_SPLIT_PMD_PTLOCK. Fixes: 66f24fa7 ("mm: drop redundant ARCH_ENABLE_SPLIT_PMD_PTLOCK") Cc: stable@vger.kernel.org # v5.13+ Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com> Reviewed-by: Daniel Axtens <dja@axtens.net> [mpe: Reword change log to make it clear this is a bug fix] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20210819113954.17515-3-lukas.bulwahn@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Vincent Chen authored
commit 379eb01c upstream. The value of FP registers in the core dump file comes from the thread.fstate. However, kernel saves the FP registers to the thread.fstate only before scheduling out the process. If no process switch happens during the exception handling process, kernel will not have a chance to save the latest value of FP registers to thread.fstate. It will cause the value of FP registers in the core dump file may be incorrect. To solve this problem, this patch force lets kernel save the FP register into the thread.fstate if the target task_struct equals the current. Signed-off-by: Vincent Chen <vincent.chen@sifive.com> Reviewed-by: Jisheng Zhang <jszhang@kernel.org> Fixes: b8c8a959 ("RISC-V: Add FP register ptrace support for gdb.") Cc: stable@vger.kernel.org Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Rob Herring authored
commit 1c8094e3 upstream. When the schema fixups are applied to 'select' the result is a single entry is required for a match, but that will never match as there should be 2 entries. Also, a 'select' schema should have the widest possible match, so use 'contains' which matches the compatible string(s) in any position and not just the first position. Fixes: 993dcfac ("dt-bindings: riscv: sifive-l2-cache: convert bindings to json-schema") Signed-off-by: Rob Herring <robh@kernel.org> Cc: stable@vger.kernel.org Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Xiubo Li authored
commit b2f9fa1f upstream. The ceph_cap_flush structures are usually dynamically allocated, but the ceph_cap_snap has an embedded one. When force umounting, the client will try to remove all the session caps. During this, it will free them, but that should not be done with the ones embedded in a capsnap. Fix this by adding a new boolean that indicates that the cap flush is embedded in a capsnap, and skip freeing it if that's set. At the same time, switch to using list_del_init() when detaching the i_list and g_list heads. It's possible for a forced umount to remove these objects but then handle_cap_flushsnap_ack() races in and does the list_del_init() again, corrupting memory. Cc: stable@vger.kernel.org URL: https://tracker.ceph.com/issues/52283 Signed-off-by: Xiubo Li <xiubli@redhat.com> Reviewed-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: Ilya Dryomov <idryomov@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Stefan Mätje authored
commit 044012b5 upstream. This patch fixes the interchanged fetch of the CAN RX and TX error counters from the ESD_EV_CAN_ERROR_EXT message. The RX error counter is really in struct rx_msg::data[2] and the TX error counter is in struct rx_msg::data[3]. Fixes: 96d8e903 ("can: Add driver for esd CAN-USB/2 device") Link: https://lore.kernel.org/r/20210825215227.4947-2-stefan.maetje@esd.eu Cc: stable@vger.kernel.org Signed-off-by: Stefan Mätje <stefan.maetje@esd.eu> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Mark Brown authored
[ Upstream commit 48c812e0 ] The ocelot driver makes use of regmap, wrapping it with driver specific operations that are thin wrappers around the core regmap APIs. These are exported with EXPORT_SYMBOL, dropping the _GPL from the core regmap exports which is frowned upon. Add _GPL suffixes to at least the APIs that are doing register I/O. Signed-off-by: Mark Brown <broonie@kernel.org> Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
-