- Aug 26, 2021
-
-
Xie Yongji authored
[ Upstream commit f7ad318e ] This fixes the incorrect calculation for integer overflow when the last address of iova range is 0xffffffff. Fixes: ec33d031 ("vhost: detect 32 bit integer wrap around") Reported-by:
Jason Wang <jasowang@redhat.com> Signed-off-by:
Xie Yongji <xieyongji@bytedance.com> Acked-by:
Jason Wang <jasowang@redhat.com> Link: https://lore.kernel.org/r/20210728130756.97-2-xieyongji@bytedance.com Signed-off-by:
Michael S. Tsirkin <mst@redhat.com> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Randy Dunlap authored
[ Upstream commit 86aab09a ] GCC complains about empty macros in an 'if' statement, so convert them to 'do {} while (0)' macros. Fixes these build warnings: net/dccp/output.c: In function 'dccp_xmit_packet': ../net/dccp/output.c:283:71: warning: suggest braces around empty body in an 'if' statement [-Wempty-body] 283 | dccp_pr_debug("transmit_skb() returned err=%d\n", err); net/dccp/ackvec.c: In function 'dccp_ackvec_update_old': ../net/dccp/ackvec.c:163:80: warning: suggest braces around empty body in an 'else' statement [-Wempty-body] 163 | (unsigned long long)seqno, state); Fixes: dc841e30 ("dccp: Extend CCID packet dequeueing interface") Fixes: 38024086 ("dccp ccid-2: Update code for the Ack Vector input/registration routine") Signed-off-by:
Randy Dunlap <rdunlap@infradead.org> Cc: dccp@vger.kernel.org Cc: "David S. Miller" <davem@davemloft.net> Cc: Jakub Kicinski <kuba@kernel.org> Cc: Gerrit Renker <gerrit@erg.abdn.ac.uk> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Ole Bjørn Midtbø authored
[ Upstream commit cca342d9 ] A different wait queue was used when removing ctrl_wait than when adding it. This effectively made the remove operation without locking compared to other operations on the wait queue ctrl_wait was part of. This caused issues like below where dead000000000100 is LIST_POISON1 and dead000000000200 is LIST_POISON2. list_add corruption. next->prev should be prev (ffffffc1b0a33a08), \ but was dead000000000200. (next=ffffffc03ac77de0). ------------[ cut here ]------------ CPU: 3 PID: 2138 Comm: bluetoothd Tainted: G O 4.4.238+ #9 ... ---[ end trace 0adc2158f0646eac ]--- Call trace: [<ffffffc000443f78>] __list_add+0x38/0xb0 [<ffffffc0000f0d04>] add_wait_queue+0x4c/0x68 [<ffffffc00020eecc>] __pollwait+0xec/0x100 [<ffffffc000d1556c>] bt_sock_poll+0x74/0x200 [<ffffffc000bdb8a8>] sock_poll+0x110/0x128 [<ffffffc000210378>] do_sys_poll+0x220/0x480 [<ffffffc0002106f0>] SyS_poll+0x80/0x138 [<ffffffc00008510c>] __sys_trace_return+0x0/0x4 Unable to handle kernel paging request at virtual address dead000000000100 ... CPU: 4 PID: 5387 Comm: kworker/u15:3 Tainted: G W O 4.4.238+ #9 ... Call trace: [<ffffffc0000f079c>] __wake_up_common+0x7c/0xa8 [<ffffffc0000f0818>] __wake_up+0x50/0x70 [<ffffffc000be11b0>] sock_def_wakeup+0x58/0x60 [<ffffffc000de5e10>] l2cap_sock_teardown_cb+0x200/0x224 [<ffffffc000d3f2ac>] l2cap_chan_del+0xa4/0x298 [<ffffffc000d45ea0>] l2cap_conn_del+0x118/0x198 [<ffffffc000d45f8c>] l2cap_disconn_cfm+0x6c/0x78 [<ffffffc000d29934>] hci_event_packet+0x564/0x2e30 [<ffffffc000d19b0c>] hci_rx_work+0x10c/0x360 [<ffffffc0000c2218>] process_one_work+0x268/0x460 [<ffffffc0000c2678>] worker_thread+0x268/0x480 [<ffffffc0000c94e0>] kthread+0x118/0x128 [<ffffffc000085070>] ret_from_fork+0x10/0x20 ---[ end trace 0adc2158f0646ead ]--- Signed-off-by:
Ole Bjørn Midtbø <omidtbo@cisco.com> Signed-off-by:
Marcel Holtmann <marcel@holtmann.org> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Sudeep Holla authored
[ Upstream commit 47091f47 ] Once the new schema interrupt-controller/arm,vic.yaml is added, we get the below warnings: arch/arm/boot/dts/ste-nomadik-nhk15.dt.yaml: intc@10140000: $nodename:0: 'intc@10140000' does not match '^interrupt-controller(@[0-9a-f,]+)*$' Fix the node names for the interrupt controller to conform to the standard node name interrupt-controller@.. Signed-off-by:
Sudeep Holla <sudeep.holla@arm.com> Signed-off-by:
Linus Walleij <linus.walleij@linaro.org> Cc: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20210617210825.3064367-2-sudeep.holla@arm.com Link: https://lore.kernel.org/r/20210626000103.830184-1-linus.walleij@linaro.org' Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Sreekanth Reddy authored
[ Upstream commit 70edd2e6 ] Avoid printing a 'target allocation failed' error if the driver target_alloc() callback function returns -ENXIO. This return value indicates that the corresponding H:C:T:L entry is empty. Removing this error reduces the scan time if the user issues SCAN_WILD_CARD scan operation through sysfs parameter on a host with a lot of empty H:C:T:L entries. Avoiding the printk on -ENXIO matches the behavior of the other callback functions during scanning. Link: https://lore.kernel.org/r/20210726115402.1936-1-sreekanth.reddy@broadcom.com Signed-off-by:
Sreekanth Reddy <sreekanth.reddy@broadcom.com> Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Ye Bin authored
[ Upstream commit bc546c0c ] The following BUG_ON() was observed during RDAC scan: [595952.944297] kernel BUG at drivers/scsi/device_handler/scsi_dh_rdac.c:427! [595952.951143] Internal error: Oops - BUG: 0 [#1] SMP ...... [595953.251065] Call trace: [595953.259054] check_ownership+0xb0/0x118 [595953.269794] rdac_bus_attach+0x1f0/0x4b0 [595953.273787] scsi_dh_handler_attach+0x3c/0xe8 [595953.278211] scsi_dh_add_device+0xc4/0xe8 [595953.282291] scsi_sysfs_add_sdev+0x8c/0x2a8 [595953.286544] scsi_probe_and_add_lun+0x9fc/0xd00 [595953.291142] __scsi_scan_target+0x598/0x630 [595953.295395] scsi_scan_target+0x120/0x130 [595953.299481] fc_user_scan+0x1a0/0x1c0 [scsi_transport_fc] [595953.304944] store_scan+0xb0/0x108 [595953.308420] dev_attr_store+0x44/0x60 [595953.312160] sysfs_kf_write+0x58/0x80 [595953.315893] kernfs_fop_write+0xe8/0x1f0 [595953.319888] __vfs_write+0x60/0x190 [595953.323448] vfs_write+0xac/0x1c0 [595953.326836] ksys_write+0x74/0xf0 [595953.330221] __arm64_sys_write+0x24/0x30 Code is in check_ownership: list_for_each_entry_rcu(tmp, &h->ctlr->dh_list, node) { /* h->sdev should always be valid */ BUG_ON(!tmp->sdev); tmp->sdev->access_state = access_state; } rdac_bus_attach initialize_controller list_add_rcu(&h->node, &h->ctlr->dh_list); h->sdev = sdev; rdac_bus_detach list_del_rcu(&h->node); h->sdev = NULL; Fix the race between rdac_bus_attach() and rdac_bus_detach() where h->sdev is NULL when processing the RDAC attach. Link: https://lore.kernel.org/r/20210113063103.2698953-1-yebin10@huawei.com Reviewed-by:
Bart Van Assche <bvanassche@acm.org> Signed-off-by:
Ye Bin <yebin10@huawei.com> Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Harshvardhan Jha authored
[ Upstream commit 77541f78 ] The list_for_each_entry() iterator, "adapter" in this code, can never be NULL. If we exit the loop without finding the correct adapter then "adapter" points invalid memory that is an offset from the list head. This will eventually lead to memory corruption and presumably a kernel crash. Link: https://lore.kernel.org/r/20210708074642.23599-1-harshvardhan.jha@oracle.com Acked-by:
Sumit Saxena <sumit.saxena@broadcom.com> Signed-off-by:
Harshvardhan Jha <harshvardhan.jha@oracle.com> Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Peter Ujfalusi authored
[ Upstream commit eda97cb0 ] If the router_xlate can not find the controller in the available DMA devices then it should return with -EPORBE_DEFER in a same way as the of_dma_request_slave_channel() does. The issue can be reproduced if the event router is registered before the DMA controller itself and a driver would request for a channel before the controller is registered. In of_dma_request_slave_channel(): 1. of_dma_find_controller() would find the dma_router 2. ofdma->of_dma_xlate() would fail and returned NULL 3. -ENODEV is returned as error code with this patch we would return in this case the correct -EPROBE_DEFER and the client can try to request the channel later. Signed-off-by:
Peter Ujfalusi <peter.ujfalusi@gmail.com> Link: https://lore.kernel.org/r/20210717190021.21897-1-peter.ujfalusi@gmail.com Signed-off-by:
Vinod Koul <vkoul@kernel.org> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Dave Gerlach authored
[ Upstream commit 20a6b3fd ] Based on the latest timing specifications for the TPS65218 from the data sheet, http://www.ti.com/lit/ds/symlink/tps65218.pdf, document SLDS206 from November 2014, we must change the i2c bus speed to better fit within the minimum high SCL time required for proper i2c transfer. When running at 400khz, measurements show that SCL spends 0.8125 uS/1.666 uS high/low which violates the requirement for minimum high period of SCL provided in datasheet Table 7.6 which is 1 uS. Switching to 100khz gives us 5 uS/5 uS high/low which both fall above the minimum given values for 100 khz, 4.0 uS/4.7 uS high/low. Without this patch occasionally a voltage set operation from the kernel will appear to have worked but the actual voltage reflected on the PMIC will not have updated, causing problems especially with cpufreq that may update to a higher OPP without actually raising the voltage on DCDC2, leading to a hang. Signed-off-by:
Dave Gerlach <d-gerlach@ti.com> Signed-off-by:
Kevin Hilman <khilman@baylibre.com> Signed-off-by:
Tony Lindgren <tony@atomide.com> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Yu Kuai authored
[ Upstream commit 1da569fa ] pm_runtime_get_sync will increment pm usage counter even it failed. Forgetting to putting operation will result in reference leak here. Fix it by moving the error_pm label above the pm_runtime_put() in the error path. Reported-by:
Hulk Robot <hulkci@huawei.com> Signed-off-by:
Yu Kuai <yukuai3@huawei.com> Link: https://lore.kernel.org/r/20210706124521.1371901-1-yukuai3@huawei.com Signed-off-by:
Vinod Koul <vkoul@kernel.org> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Thomas Gleixner authored
commit f9dfb5e3 upstream. The XSAVE init code initializes all enabled and supported components with XRSTOR(S) to init state. Then it XSAVEs the state of the components back into init_fpstate which is used in several places to fill in the init state of components. This works correctly with XSAVE, but not with XSAVEOPT and XSAVES because those use the init optimization and skip writing state of components which are in init state. So init_fpstate.xsave still contains all zeroes after this operation. There are two ways to solve that: 1) Use XSAVE unconditionally, but that requires to reshuffle the buffer when XSAVES is enabled because XSAVES uses compacted format. 2) Save the components which are known to have a non-zero init state by other means. Looking deeper, #2 is the right thing to do because all components the kernel supports have all-zeroes init state except the legacy features (FP, SSE). Those cannot be hard coded because the states are not identical on all CPUs, but they can be saved with FXSAVE which avoids all conditionals. Use FXSAVE to save the legacy FP/SSE components in init_fpstate along with a BUILD_BUG_ON() which reminds developers to validate that a newly added component has all zeroes init state. As a bonus remove the now unused copy_xregs_to_kernel_booting() crutch. The XSAVE and reshuffle method can still be implemented in the unlikely case that components are added which have a non-zero init state and no other means to save them. For now, FXSAVE is just simple and good enough. [ bp: Fix a typo or two in the text. ] Fixes: 6bad06b7 ("x86, xsave: Use xsaveopt in context-switch path when supported") Signed-off-by:
Thomas Gleixner <tglx@linutronix.de> Signed-off-by:
Borislav Petkov <bp@suse.de> Reviewed-by:
Borislav Petkov <bp@suse.de> Cc: stable@vger.kernel.org Link: https://lkml.kernel.org/r/20210618143444.587311343@linutronix.de Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Maxim Levitsky authored
[ upstream commit 0f923e07 ] * Invert the mask of bits that we pick from L2 in nested_vmcb02_prepare_control * Invert and explicitly use VIRQ related bits bitmask in svm_clear_vintr This fixes a security issue that allowed a malicious L1 to run L2 with AVIC enabled, which allowed the L2 to exploit the uninitialized and enabled AVIC to read/write the host physical memory at some offsets. Fixes: 3d6368ef ("KVM: SVM: Add VMRUN handler") Signed-off-by:
Maxim Levitsky <mlevitsk@redhat.com> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Johannes Berg authored
commit a0761a30 upstream. If we know that we have an encrypted link (based on having had a key configured for TX in the past) then drop all data frames in the key selection handler if there's no key anymore. This fixes an issue with mac80211 internal TXQs - there we can buffer frames for an encrypted link, but then if the key is no longer there when they're dequeued, the frames are sent without encryption. This happens if a station is disconnected while the frames are still on the TXQ. Detecting that a link should be encrypted based on a first key having been configured for TX is fine as there are no use cases for a connection going from with encryption to no encryption. With extended key IDs, however, there is a case of having a key configured for only decryption, so we can't just trigger this behaviour on a key being configured. Cc: stable@vger.kernel.org Reported-by:
Jouni Malinen <j@w1.fi> Signed-off-by:
Johannes Berg <johannes.berg@intel.com> Signed-off-by:
Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20200326150855.6865c7f28a14.I9fb1d911b064262d33e33dfba730cdeef83926ca@changeid Signed-off-by:
Johannes Berg <johannes.berg@intel.com> [pali: Backported to 4.19 and older versions] Signed-off-by:
Pali Rohár <pali@kernel.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Nathan Chancellor authored
commit 84837881 upstream. A recent change in LLVM causes module_{c,d}tor sections to appear when CONFIG_K{A,C}SAN are enabled, which results in orphan section warnings because these are not handled anywhere: ld.lld: warning: arch/x86/pci/built-in.a(legacy.o):(.text.asan.module_ctor) is being placed in '.text.asan.module_ctor' ld.lld: warning: arch/x86/pci/built-in.a(legacy.o):(.text.asan.module_dtor) is being placed in '.text.asan.module_dtor' ld.lld: warning: arch/x86/pci/built-in.a(legacy.o):(.text.tsan.module_ctor) is being placed in '.text.tsan.module_ctor' Fangrui explains: "the function asan.module_ctor has the SHF_GNU_RETAIN flag, so it is in a separate section even with -fno-function-sections (default)". Place them in the TEXT_TEXT section so that these technologies continue to work with the newer compiler versions. All of the KASAN and KCSAN KUnit tests continue to pass after this change. Cc: stable@vger.kernel.org Link: https://github.com/ClangBuiltLinux/linux/issues/1432 Link: https://github.com/llvm/llvm-project/commit/7b789562244ee941b7bf2cefeb3fc08a59a01865 Signed-off-by:
Nathan Chancellor <nathan@kernel.org> Reviewed-by:
Nick Desaulniers <ndesaulniers@google.com> Reviewed-by:
Fangrui Song <maskray@google.com> Acked-by:
Marco Elver <elver@google.com> Signed-off-by:
Kees Cook <keescook@chromium.org> Link: https://lore.kernel.org/r/20210731023107.1932981-1-nathan@kernel.org [nc: Fix conflicts due to lack of cf68fffb and 266ff2a8 ] Signed-off-by:
Nathan Chancellor <nathan@kernel.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Thomas Gleixner authored
commit b9255a7c upstream. Nothing enforces the posted writes to be visible when the function returns. Flush them even if the flush might be redundant when the entry is masked already as the unmask will flush as well. This is either setup or a rare affinity change event so the extra flush is not the end of the world. While this is more a theoretical issue especially the logic in the X86 specific msi_set_affinity() function relies on the assumption that the update has reached the hardware when the function returns. Again, as this never has been enforced the Fixes tag refers to a commit in: git://git.kernel.org/pub/scm/linux/kernel/git/tglx/history.git Fixes: f036d4ea5fa7 ("[PATCH] ia32 Message Signalled Interrupt support") Signed-off-by:
Thomas Gleixner <tglx@linutronix.de> Tested-by:
Marc Zyngier <maz@kernel.org> Reviewed-by:
Marc Zyngier <maz@kernel.org> Acked-by:
Bjorn Helgaas <bhelgaas@google.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20210729222542.515188147@linutronix.de Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Thomas Gleixner authored
commit da181dc9 upstream. The specification (PCIe r5.0, sec 6.1.4.5) states: For MSI-X, a function is permitted to cache Address and Data values from unmasked MSI-X Table entries. However, anytime software unmasks a currently masked MSI-X Table entry either by clearing its Mask bit or by clearing the Function Mask bit, the function must update any Address or Data values that it cached from that entry. If software changes the Address or Data value of an entry while the entry is unmasked, the result is undefined. The Linux kernel's MSI-X support never enforced that the entry is masked before the entry is modified hence the Fixes tag refers to a commit in: git://git.kernel.org/pub/scm/linux/kernel/git/tglx/history.git Enforce the entry to be masked across the update. There is no point in enforcing this to be handled at all possible call sites as this is just pointless code duplication and the common update function is the obvious place to enforce this. Fixes: f036d4ea5fa7 ("[PATCH] ia32 Message Signalled Interrupt support") Reported-by:
Kevin Tian <kevin.tian@intel.com> Signed-off-by:
Thomas Gleixner <tglx@linutronix.de> Tested-by:
Marc Zyngier <maz@kernel.org> Reviewed-by:
Marc Zyngier <maz@kernel.org> Acked-by:
Bjorn Helgaas <bhelgaas@google.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20210729222542.462096385@linutronix.de Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Thomas Gleixner authored
commit 7d5ec3d3 upstream. When MSI-X is enabled the ordering of calls is: msix_map_region(); msix_setup_entries(); pci_msi_setup_msi_irqs(); msix_program_entries(); This has a few interesting issues: 1) msix_setup_entries() allocates the MSI descriptors and initializes them except for the msi_desc:masked member which is left zero initialized. 2) pci_msi_setup_msi_irqs() allocates the interrupt descriptors and sets up the MSI interrupts which ends up in pci_write_msi_msg() unless the interrupt chip provides its own irq_write_msi_msg() function. 3) msix_program_entries() does not do what the name suggests. It solely updates the entries array (if not NULL) and initializes the masked member for each MSI descriptor by reading the hardware state and then masks the entry. Obviously this has some issues: 1) The uninitialized masked member of msi_desc prevents the enforcement of masking the entry in pci_write_msi_msg() depending on the cached masked bit. Aside of that half initialized data is a NONO in general 2) msix_program_entries() only ensures that the actually allocated entries are masked. This is wrong as experimentation with crash testing and crash kernel kexec has shown. This limited testing unearthed that when the production kernel had more entries in use and unmasked when it crashed and the crash kernel allocated a smaller amount of entries, then a full scan of all entries found unmasked entries which were in use in the production kernel. This is obviously a device or emulation issue as the device reset should mask all MSI-X table entries, but obviously that's just part of the paper specification. Cure this by: 1) Masking all table entries in hardware 2) Initializing msi_desc::masked in msix_setup_entries() 3) Removing the mask dance in msix_program_entries() 4) Renaming msix_program_entries() to msix_update_entries() to reflect the purpose of that function. As the masking of unused entries has never been done the Fixes tag refers to a commit in: git://git.kernel.org/pub/scm/linux/kernel/git/tglx/history.git Fixes: f036d4ea5fa7 ("[PATCH] ia32 Message Signalled Interrupt support") Signed-off-by:
Thomas Gleixner <tglx@linutronix.de> Tested-by:
Marc Zyngier <maz@kernel.org> Reviewed-by:
Marc Zyngier <maz@kernel.org> Acked-by:
Bjorn Helgaas <bhelgaas@google.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20210729222542.403833459@linutronix.de Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Thomas Gleixner authored
commit 77e89afc upstream. Multi-MSI uses a single MSI descriptor and there is a single mask register when the device supports per vector masking. To avoid reading back the mask register the value is cached in the MSI descriptor and updates are done by clearing and setting bits in the cache and writing it to the device. But nothing protects msi_desc::masked and the mask register from being modified concurrently on two different CPUs for two different Linux interrupts which belong to the same multi-MSI descriptor. Add a lock to struct device and protect any operation on the mask and the mask register with it. This makes the update of msi_desc::masked unconditional, but there is no place which requires a modification of the hardware register without updating the masked cache. msi_mask_irq() is now an empty wrapper which will be cleaned up in follow up changes. The problem goes way back to the initial support of multi-MSI, but picking the commit which introduced the mask cache is a valid cut off point (2.6.30). Fixes: f2440d9a ("PCI MSI: Refactor interrupt masking code") Signed-off-by:
Thomas Gleixner <tglx@linutronix.de> Tested-by:
Marc Zyngier <maz@kernel.org> Reviewed-by:
Marc Zyngier <maz@kernel.org> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20210729222542.726833414@linutronix.de Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Thomas Gleixner authored
commit d28d4ad2 upstream. No point in using the raw write function from shutdown. Preparatory change to introduce proper serialization for the msi_desc::masked cache. Signed-off-by:
Thomas Gleixner <tglx@linutronix.de> Tested-by:
Marc Zyngier <maz@kernel.org> Reviewed-by:
Marc Zyngier <maz@kernel.org> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20210729222542.674391354@linutronix.de Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Thomas Gleixner authored
commit 689e6b53 upstream. The comments about preserving the cached state in pci_msi[x]_shutdown() are misleading as the MSI descriptors are freed right after those functions return. So there is nothing to restore. Preparatory change. Signed-off-by:
Thomas Gleixner <tglx@linutronix.de> Tested-by:
Marc Zyngier <maz@kernel.org> Reviewed-by:
Marc Zyngier <maz@kernel.org> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20210729222542.621609423@linutronix.de Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Thomas Gleixner authored
commit 361fd373 upstream. msi_mask_irq() takes a mask and a flags argument. The mask argument is used to mask out bits from the cached mask and the flags argument to set bits. Some places invoke it with a flags argument which sets bits which are not used by the device, i.e. when the device supports up to 8 vectors a full unmask in some places sets the mask to 0xFFFFFF00. While devices probably do not care, it's still bad practice. Fixes: 7ba1930d ("PCI MSI: Unmask MSI if setup failed") Signed-off-by:
Thomas Gleixner <tglx@linutronix.de> Tested-by:
Marc Zyngier <maz@kernel.org> Reviewed-by:
Marc Zyngier <maz@kernel.org> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20210729222542.568173099@linutronix.de Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Thomas Gleixner authored
commit 43855395 upstream. The ordering of MSI-X enable in hardware is dysfunctional: 1) MSI-X is disabled in the control register 2) Various setup functions 3) pci_msi_setup_msi_irqs() is invoked which ends up accessing the MSI-X table entries 4) MSI-X is enabled and masked in the control register with the comment that enabling is required for some hardware to access the MSI-X table Step #4 obviously contradicts #3. The history of this is an issue with the NIU hardware. When #4 was introduced the table access actually happened in msix_program_entries() which was invoked after enabling and masking MSI-X. This was changed in commit d71d6432 ("PCI/MSI: Kill redundant call of irq_set_msi_desc() for MSI-X interrupts") which removed the table write from msix_program_entries(). Interestingly enough nobody noticed and either NIU still works or it did not get any testing with a kernel 3.19 or later. Nevertheless this is inconsistent and there is no reason why MSI-X can't be enabled and masked in the control register early on, i.e. move step #4 above to step #1. This preserves the NIU workaround and has no side effects on other hardware. Fixes: d71d6432 ("PCI/MSI: Kill redundant call of irq_set_msi_desc() for MSI-X interrupts") Signed-off-by:
Thomas Gleixner <tglx@linutronix.de> Tested-by:
Marc Zyngier <maz@kernel.org> Reviewed-by:
Ashok Raj <ashok.raj@intel.com> Reviewed-by:
Marc Zyngier <maz@kernel.org> Acked-by:
Bjorn Helgaas <bhelgaas@google.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20210729222542.344136412@linutronix.de Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Randy Dunlap authored
[ Upstream commit 839ad22f ] Skip (omit) any version string info that is parenthesized. Warning: objdump version 15) is older than 2.19 Warning: Skipping posttest. where 'objdump -v' says: GNU objdump (GNU Binutils; SUSE Linux Enterprise 15) 2.35.1.20201123-7.18 Fixes: 8bee738b ("x86: Fix objdump version check in chkobjdump.awk for different formats.") Signed-off-by:
Randy Dunlap <rdunlap@infradead.org> Signed-off-by:
Thomas Gleixner <tglx@linutronix.de> Reviewed-by:
Masami Hiramatsu <mhiramat@kernel.org> Link: https://lore.kernel.org/r/20210731000146.2720-1-rdunlap@infradead.org Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Maximilian Heyne authored
[ Upstream commit 88ca2521 ] There is a TOCTOU issue in set_evtchn_to_irq. Rows in the evtchn_to_irq mapping are lazily allocated in this function. The check whether the row is already present and the row initialization is not synchronized. Two threads can at the same time allocate a new row for evtchn_to_irq and add the irq mapping to the their newly allocated row. One thread will overwrite what the other has set for evtchn_to_irq[row] and therefore the irq mapping is lost. This will trigger a BUG_ON later in bind_evtchn_to_cpu: INFO: pci 0000:1a:15.4: [1d0f:8061] type 00 class 0x010802 INFO: nvme 0000:1a:12.1: enabling device (0000 -> 0002) INFO: nvme nvme77: 1/0/0 default/read/poll queues CRIT: kernel BUG at drivers/xen/events/events_base.c:427! WARN: invalid opcode: 0000 [#1] SMP NOPTI WARN: Workqueue: nvme-reset-wq nvme_reset_work [nvme] WARN: RIP: e030:bind_evtchn_to_cpu+0xc2/0xd0 WARN: Call Trace: WARN: set_affinity_irq+0x121/0x150 WARN: irq_do_set_affinity+0x37/0xe0 WARN: irq_setup_affinity+0xf6/0x170 WARN: irq_startup+0x64/0xe0 WARN: __setup_irq+0x69e/0x740 WARN: ? request_threaded_irq+0xad/0x160 WARN: request_threaded_irq+0xf5/0x160 WARN: ? nvme_timeout+0x2f0/0x2f0 [nvme] WARN: pci_request_irq+0xa9/0xf0 WARN: ? pci_alloc_irq_vectors_affinity+0xbb/0x130 WARN: queue_request_irq+0x4c/0x70 [nvme] WARN: nvme_reset_work+0x82d/0x1550 [nvme] WARN: ? check_preempt_wakeup+0x14f/0x230 WARN: ? check_preempt_curr+0x29/0x80 WARN: ? nvme_irq_check+0x30/0x30 [nvme] WARN: process_one_work+0x18e/0x3c0 WARN: worker_thread+0x30/0x3a0 WARN: ? process_one_work+0x3c0/0x3c0 WARN: kthread+0x113/0x130 WARN: ? kthread_park+0x90/0x90 WARN: ret_from_fork+0x3a/0x50 This patch sets evtchn_to_irq rows via a cmpxchg operation so that they will be set only once. The row is now cleared before writing it to evtchn_to_irq in order to not create a race once the row is visible for other threads. While at it, do not require the page to be zeroed, because it will be overwritten with -1's in clear_evtchn_to_irq_row anyway. Signed-off-by:
Maximilian Heyne <mheyne@amazon.de> Fixes: d0b075ff ("xen/events: Refactor evtchn_to_irq array to be dynamically allocated") Link: https://lore.kernel.org/r/20210812130930.127134-1-mheyne@amazon.de Reviewed-by:
Boris Ostrovsky <boris.ostrovsky@oracle.com> Signed-off-by:
Boris Ostrovsky <boris.ostrovsky@oracle.com> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Neal Cardwell authored
[ Upstream commit 6de035fe ] Currently if BBR congestion control is initialized after more than 2B packets have been delivered, depending on the phase of the tp->delivered counter the tracking of BBR round trips can get stuck. The bug arises because if tp->delivered is between 2^31 and 2^32 at the time the BBR congestion control module is initialized, then the initialization of bbr->next_rtt_delivered to 0 will cause the logic to believe that the end of the round trip is still billions of packets in the future. More specifically, the following check will fail repeatedly: !before(rs->prior_delivered, bbr->next_rtt_delivered) and thus the connection will take up to 2B packets delivered before that check will pass and the connection will set: bbr->round_start = 1; This could cause many mechanisms in BBR to fail to trigger, for example bbr_check_full_bw_reached() would likely never exit STARTUP. This bug is 5 years old and has not been observed, and as a practical matter this would likely rarely trigger, since it would require transferring at least 2B packets, or likely more than 3 terabytes of data, before switching congestion control algorithms to BBR. This patch is a stable candidate for kernels as far back as v4.9, when tcp_bbr.c was added. Fixes: 0f8782ea ("tcp_bbr: add BBR congestion control") Signed-off-by:
Neal Cardwell <ncardwell@google.com> Reviewed-by:
Yuchung Cheng <ycheng@google.com> Reviewed-by:
Kevin Yang <yyd@google.com> Reviewed-by:
Eric Dumazet <edumazet@google.com> Link: https://lore.kernel.org/r/20210811024056.235161-1-ncardwell@google.com Signed-off-by:
Jakub Kicinski <kuba@kernel.org> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Yang Yingliang authored
[ Upstream commit 519133de ] I got a memleak report: BUG: memory leak unreferenced object 0x607ee521a658 (size 240): comm "syz-executor.0", pid 955, jiffies 4294780569 (age 16.449s) hex dump (first 32 bytes, cpu 1): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: [<00000000d830ea5a>] br_multicast_add_port+0x1c2/0x300 net/bridge/br_multicast.c:1693 [<00000000274d9a71>] new_nbp net/bridge/br_if.c:435 [inline] [<00000000274d9a71>] br_add_if+0x670/0x1740 net/bridge/br_if.c:611 [<0000000012ce888e>] do_set_master net/core/rtnetlink.c:2513 [inline] [<0000000012ce888e>] do_set_master+0x1aa/0x210 net/core/rtnetlink.c:2487 [<0000000099d1cafc>] __rtnl_newlink+0x1095/0x13e0 net/core/rtnetlink.c:3457 [<00000000a01facc0>] rtnl_newlink+0x64/0xa0 net/core/rtnetlink.c:3488 [<00000000acc9186c>] rtnetlink_rcv_msg+0x369/0xa10 net/core/rtnetlink.c:5550 [<00000000d4aabb9c>] netlink_rcv_skb+0x134/0x3d0 net/netlink/af_netlink.c:2504 [<00000000bc2e12a3>] netlink_unicast_kernel net/netlink/af_netlink.c:1314 [inline] [<00000000bc2e12a3>] netlink_unicast+0x4a0/0x6a0 net/netlink/af_netlink.c:1340 [<00000000e4dc2d0e>] netlink_sendmsg+0x789/0xc70 net/netlink/af_netlink.c:1929 [<000000000d22c8b3>] sock_sendmsg_nosec net/socket.c:654 [inline] [<000000000d22c8b3>] sock_sendmsg+0x139/0x170 net/socket.c:674 [<00000000e281417a>] ____sys_sendmsg+0x658/0x7d0 net/socket.c:2350 [<00000000237aa2ab>] ___sys_sendmsg+0xf8/0x170 net/socket.c:2404 [<000000004f2dc381>] __sys_sendmsg+0xd3/0x190 net/socket.c:2433 [<0000000005feca6c>] do_syscall_64+0x37/0x90 arch/x86/entry/common.c:47 [<000000007304477d>] entry_SYSCALL_64_after_hwframe+0x44/0xae On error path of br_add_if(), p->mcast_stats allocated in new_nbp() need be freed, or it will be leaked. Fixes: 1080ab95 ("net: bridge: add support for IGMP/MLD stats and export them via netlink") Reported-by:
Hulk Robot <hulkci@huawei.com> Signed-off-by:
Yang Yingliang <yangyingliang@huawei.com> Acked-by:
Nikolay Aleksandrov <nikolay@nvidia.com> Link: https://lore.kernel.org/r/20210809132023.978546-1-yangyingliang@huawei.com Signed-off-by:
Jakub Kicinski <kuba@kernel.org> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Takeshi Misawa authored
[ Upstream commit 1090340f ] If IEEE-802.15.4-RAW is closed before receive skb, skb is leaked. Fix this, by freeing sk_receive_queue in sk->sk_destruct(). syzbot report: BUG: memory leak unreferenced object 0xffff88810f644600 (size 232): comm "softirq", pid 0, jiffies 4294967032 (age 81.270s) hex dump (first 32 bytes): 10 7d 4b 12 81 88 ff ff 10 7d 4b 12 81 88 ff ff .}K......}K..... 00 00 00 00 00 00 00 00 40 7c 4b 12 81 88 ff ff ........@|K..... backtrace: [<ffffffff83651d4a>] skb_clone+0xaa/0x2b0 net/core/skbuff.c:1496 [<ffffffff83fe1b80>] ieee802154_raw_deliver net/ieee802154/socket.c:369 [inline] [<ffffffff83fe1b80>] ieee802154_rcv+0x100/0x340 net/ieee802154/socket.c:1070 [<ffffffff8367cc7a>] __netif_receive_skb_one_core+0x6a/0xa0 net/core/dev.c:5384 [<ffffffff8367cd07>] __netif_receive_skb+0x27/0xa0 net/core/dev.c:5498 [<ffffffff8367cdd9>] netif_receive_skb_internal net/core/dev.c:5603 [inline] [<ffffffff8367cdd9>] netif_receive_skb+0x59/0x260 net/core/dev.c:5662 [<ffffffff83fe6302>] ieee802154_deliver_skb net/mac802154/rx.c:29 [inline] [<ffffffff83fe6302>] ieee802154_subif_frame net/mac802154/rx.c:102 [inline] [<ffffffff83fe6302>] __ieee802154_rx_handle_packet net/mac802154/rx.c:212 [inline] [<ffffffff83fe6302>] ieee802154_rx+0x612/0x620 net/mac802154/rx.c:284 [<ffffffff83fe59a6>] ieee802154_tasklet_handler+0x86/0xa0 net/mac802154/main.c:35 [<ffffffff81232aab>] tasklet_action_common.constprop.0+0x5b/0x100 kernel/softirq.c:557 [<ffffffff846000bf>] __do_softirq+0xbf/0x2ab kernel/softirq.c:345 [<ffffffff81232f4c>] do_softirq kernel/softirq.c:248 [inline] [<ffffffff81232f4c>] do_softirq+0x5c/0x80 kernel/softirq.c:235 [<ffffffff81232fc1>] __local_bh_enable_ip+0x51/0x60 kernel/softirq.c:198 [<ffffffff8367a9a4>] local_bh_enable include/linux/bottom_half.h:32 [inline] [<ffffffff8367a9a4>] rcu_read_unlock_bh include/linux/rcupdate.h:745 [inline] [<ffffffff8367a9a4>] __dev_queue_xmit+0x7f4/0xf60 net/core/dev.c:4221 [<ffffffff83fe2db4>] raw_sendmsg+0x1f4/0x2b0 net/ieee802154/socket.c:295 [<ffffffff8363af16>] sock_sendmsg_nosec net/socket.c:654 [inline] [<ffffffff8363af16>] sock_sendmsg+0x56/0x80 net/socket.c:674 [<ffffffff8363deec>] __sys_sendto+0x15c/0x200 net/socket.c:1977 [<ffffffff8363dfb6>] __do_sys_sendto net/socket.c:1989 [inline] [<ffffffff8363dfb6>] __se_sys_sendto net/socket.c:1985 [inline] [<ffffffff8363dfb6>] __x64_sys_sendto+0x26/0x30 net/socket.c:1985 Fixes: 9ec76716 ("net: add IEEE 802.15.4 socket family implementation") Reported-and-tested-by:
<syzbot+1f68113fa907bf0695a8@syzkaller.appspotmail.com> Signed-off-by:
Takeshi Misawa <jeliantsurux@gmail.com> Acked-by:
Alexander Aring <aahringo@redhat.com> Link: https://lore.kernel.org/r/20210805075414.GA15796@DESKTOP Signed-off-by:
Stefan Schmidt <stefan@datenfreihafen.org> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Pali Rohár authored
[ Upstream commit 2459dcb9 ] IFLA_IFNAME is nul-term string which means that IFLA_IFNAME buffer can be larger than length of string which contains. Function __rtnl_newlink() generates new own ifname if either IFLA_IFNAME was not specified at all or userspace passed empty nul-term string. It is expected that if userspace does not specify ifname for new ppp netdev then kernel generates one in format "ppp<id>" where id matches to the ppp unit id which can be later obtained by PPPIOCGUNIT ioctl. And it works in this way if IFLA_IFNAME is not specified at all. But it does not work when IFLA_IFNAME is specified with empty string. So fix this logic also for empty IFLA_IFNAME in ppp_nl_newlink() function and correctly generates ifname based on ppp unit identifier if userspace did not provided preferred ifname. Without this patch when IFLA_IFNAME was specified with empty string then kernel created a new ppp interface in format "ppp<id>" but id did not match ppp unit id returned by PPPIOCGUNIT ioctl. In this case id was some number generated by __rtnl_newlink() function. Signed-off-by:
Pali Rohár <pali@kernel.org> Fixes: bb8082f6 ("ppp: build ifname using unit identifier for rtnl based devices") Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Dan Williams authored
commit b93dfa6b upstream. Fix the NFIT parsing code to treat a 0 index in a SPA Range Structure as a special case and not match Region Mapping Structures that use 0 to indicate that they are not mapped. Without this fix some platform BIOS descriptions of "virtual disk" ranges do not result in the pmem driver attaching to the range. Details: In addition to typical persistent memory ranges, the ACPI NFIT may also convey "virtual" ranges. These ranges are indicated by a UUID in the SPA Range Structure of UUID_VOLATILE_VIRTUAL_DISK, UUID_VOLATILE_VIRTUAL_CD, UUID_PERSISTENT_VIRTUAL_DISK, or UUID_PERSISTENT_VIRTUAL_CD. The critical difference between virtual ranges and UUID_PERSISTENT_MEMORY, is that virtual do not support associations with Region Mapping Structures. For this reason the "index" value of virtual SPA Range Structures is allowed to be 0. If a platform BIOS decides to represent NVDIMMs with disconnected "Region Mapping Structures" (range-index == 0), the kernel may falsely associate them with standalone ranges where the "SPA Range Structure Index" is also zero. When this happens the driver may falsely require labels where "virtual disks" are expected to be label-less. I.e. "label-less" is where the namespace-range == region-range and the pmem driver attaches with no user action to create a namespace. Cc: Jacek Zloch <jacek.zloch@intel.com> Cc: Lukasz Sobieraj <lukasz.sobieraj@intel.com> Cc: "Lee, Chun-Yi" <jlee@suse.com> Cc: <stable@vger.kernel.org> Fixes: c2f32acd ("acpi, nfit: treat virtual ramdisk SPA as pmem region") Reported-by:
Krzysztof Rusocki <krzysztof.rusocki@intel.com> Reported-by:
Damian Bassa <damian.bassa@intel.com> Reviewed-by:
Jeff Moyer <jmoyer@redhat.com> Link: https://lore.kernel.org/r/162870796589.2521182.1240403310175570220.stgit@dwillia2-desk3.amr.corp.intel.com Signed-off-by:
Dan Williams <dan.j.williams@intel.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Greg Kroah-Hartman authored
commit 86ff25ed upstream. If an i2c driver happens to not provide the full amount of data that a user asks for, it is possible that some uninitialized data could be sent to userspace. While all in-kernel drivers look to be safe, just be sure by initializing the buffer to zero before it is passed to the i2c driver so that any future drivers will not have this issue. Also properly copy the amount of data recvieved to the userspace buffer, as pointed out by Dan Carpenter. Reported-by:
Eric Dumazet <edumazet@google.com> Cc: stable@vger.kernel.org Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
Wolfram Sang <wsa@kernel.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Takashi Iwai authored
commit 2e6b8363 upstream. PCM buffers might be allocated dynamically when the buffer preallocation failed or a larger buffer is requested, and it's not guaranteed that substream->dma_buffer points to the actually used buffer. The address should be retrieved from runtime->dma_addr, instead of substream->dma_buffer (and shouldn't use virt_to_phys). Also, remove the line overriding runtime->dma_area superfluously, which was already set up at the PCM buffer allocation. Cc: Cezary Rojewski <cezary.rojewski@intel.com> Cc: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Cc: <stable@vger.kernel.org> Signed-off-by:
Takashi Iwai <tiwai@suse.de> Link: https://lore.kernel.org/r/20210728112353.6675-3-tiwai@suse.de Signed-off-by:
Mark Brown <broonie@kernel.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Colin Ian King authored
commit 5afc1540 upstream. Currently the for-loop that scans for the optimial adc_period iterates through all the possible adc_period levels because the exit logic in the loop is inverted. I believe the comparison should be swapped and the continue replaced with a break to exit the loop at the correct point. Addresses-Coverity: ("Continue has no effect") Fixes: e08e19c3 ("iio:adc: add iio driver for Palmas (twl6035/7) gpadc") Signed-off-by:
Colin Ian King <colin.king@canonical.com> Link: https://lore.kernel.org/r/20210730071651.17394-1-colin.king@canonical.com Cc: <stable@vger.kernel.org> Signed-off-by:
Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
- Aug 15, 2021
-
-
Greg Kroah-Hartman authored
Link: https://lore.kernel.org/r/20210813150522.445553924@linuxfoundation.org Tested-by:
Shuah Khan <skhan@linuxfoundation.org> Tested-by:
Linux Kernel Functional Testing <lkft@linaro.org> Tested-by:
Guenter Roeck <linux@roeck-us.net> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Miklos Szeredi authored
commit 427215d8 upstream. Add the following checks from __do_loopback() to clone_private_mount() as well: - verify that the mount is in the current namespace - verify that there are no locked children Reported-by:
Alois Wohlschlager <alois1@gmx-topmail.de> Fixes: c771d683 ("vfs: introduce clone_private_mount()") Cc: <stable@vger.kernel.org> # v3.18 Signed-off-by:
Miklos Szeredi <mszeredi@redhat.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
YueHaibing authored
commit d0d62baa upstream. Printing kernel pointers is discouraged because they might leak kernel memory layout. This fixes smatch warning: drivers/net/ethernet/xilinx/xilinx_emaclite.c:1191 xemaclite_of_probe() warn: argument 4 to %08lX specifier is cast from pointer Signed-off-by:
YueHaibing <yuehaibing@huawei.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
Pavel Machek (CIP) <pavel@denx.de> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Pali Rohár authored
commit 3125f26c upstream. When registering new ppp interface via PPPIOCNEWUNIT ioctl then kernel has to choose interface name as this ioctl API does not support specifying it. Kernel in this case register new interface with name "ppp<id>" where <id> is the ppp unit id, which can be obtained via PPPIOCGUNIT ioctl. This applies also in the case when registering new ppp interface via rtnl without supplying IFLA_IFNAME. PPPIOCNEWUNIT ioctl allows to specify own ppp unit id which will kernel assign to ppp interface, in case this ppp id is not already used by other ppp interface. In case user does not specify ppp unit id then kernel choose the first free ppp unit id. This applies also for case when creating ppp interface via rtnl method as it does not provide a way for specifying own ppp unit id. If some network interface (does not have to be ppp) has name "ppp<id>" with this first free ppp id then PPPIOCNEWUNIT ioctl or rtnl call fails. And registering new ppp interface is not possible anymore, until interface which holds conflicting name is renamed. Or when using rtnl method with custom interface name in IFLA_IFNAME. As list of allocated / used ppp unit ids is not possible to retrieve from kernel to userspace, userspace has no idea what happens nor which interface is doing this conflict. So change the algorithm how ppp unit id is generated. And choose the first number which is not neither used as ppp unit id nor in some network interface with pattern "ppp<id>". This issue can be simply reproduced by following pppd call when there is no ppp interface registered and also no interface with name pattern "ppp<id>": pppd ifname ppp1 +ipv6 noip noauth nolock local nodetach pty "pppd +ipv6 noip noauth nolock local nodetach notty" Or by creating the one ppp interface (which gets assigned ppp unit id 0), renaming it to "ppp1" and then trying to create a new ppp interface (which will always fails as next free ppp unit id is 1, but network interface with name "ppp1" exists). This patch fixes above described issue by generating new and new ppp unit id until some non-conflicting id with network interfaces is generated. Signed-off-by:
Pali Rohár <pali@kernel.org> Cc: stable@vger.kernel.org Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Longfang Liu authored
commit 26b75952 upstream. Kunpeng920's EHCI controller does not have SBRN register. Reading the SBRN register when the controller driver is initialized will get 0. When rebooting the EHCI driver, ehci_shutdown() will be called. if the sbrn flag is 0, ehci_shutdown() will return directly. The sbrn flag being 0 will cause the EHCI interrupt signal to not be turned off after reboot. this interrupt that is not closed will cause an exception to the device sharing the interrupt. Therefore, the EHCI controller of Kunpeng920 needs to skip the read operation of the SBRN register. Acked-by:
Alan Stern <stern@rowland.harvard.edu> Signed-off-by:
Longfang Liu <liulongfang@huawei.com> Link: https://lore.kernel.org/r/1617958081-17999-1-git-send-email-liulongfang@huawei.com Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Letu Ren authored
[ Upstream commit 92766c46 ] When calling the 'ql_wait_for_drvr_lock' and 'ql_adapter_reset', the driver has already acquired the spin lock, so the driver should not call 'ssleep' in atomic context. This bug can be fixed by using 'mdelay' instead of 'ssleep'. Reported-by:
Letu Ren <fantasquex@gmail.com> Signed-off-by:
Letu Ren <fantasquex@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Prarit Bhargava authored
[ Upstream commit caace6ca ] This issue was noticed while debugging a shutdown issue where some secondary CPUs are not being shutdown correctly. A fix for that [1] requires that secondary cpus be offlined using the cpu_online_mask so that the stop operation is a no-op if CPU HOTPLUG is disabled. I, like the author in [1] looked at the architectures and found that alpha is one of two architectures that executes smp_send_stop() on all possible CPUs. On alpha, smp_send_stop() sends an IPI to all possible CPUs but only needs to send them to online CPUs. Send the stop IPI to only the online CPUs. [1] https://lkml.org/lkml/2020/1/10/250 Signed-off-by:
Prarit Bhargava <prarit@redhat.com> Cc: Richard Henderson <rth@twiddle.net> Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Signed-off-by:
Matt Turner <mattst88@gmail.com> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Shreyansh Chouhan authored
[ Upstream commit 13d25750 ] While verifying the leaf item that we read from the disk, reiserfs doesn't check the directory items, this could cause a crash when we read a directory item from the disk that has an invalid deh_location. This patch adds a check to the directory items read from the disk that does a bounds check on deh_location for the directory entries. Any directory entry header with a directory entry offset greater than the item length is considered invalid. Link: https://lore.kernel.org/r/20210709152929.766363-1-chouhan.shreyansh630@gmail.com Reported-by:
<syzbot+c31a48e6702ccb3d64c9@syzkaller.appspotmail.com> Signed-off-by:
Shreyansh Chouhan <chouhan.shreyansh630@gmail.com> Signed-off-by:
Jan Kara <jack@suse.cz> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-