- Jun 25, 2022
-
-
Enguerrand de Ribaucourt authored
When unplugging an Ethernet cable, false carrier events were produced by the PHY at a very high rate. Once the false carrier counter full, an interrupt was triggered every few clock cycles until the cable was replugged. This resulted in approximately 10k/s interrupts. Since the false carrier counter (FCSCR) is never used, we can safely disable this interrupt. In addition to improving performance, this also solved MDIO read timeouts I was randomly encountering with an i.MX8 fec MAC because of the interrupt flood. The interrupt count and MDIO timeout fix were tested on a v5.4.110 kernel. Fixes: 87461f7a ("net: phy: DP83822 initial driver submission") Signed-off-by:
Enguerrand de Ribaucourt <enguerrand.de-ribaucourt@savoirfairelinux.com> Reviewed-by:
Andrew Lunn <andrew@lunn.ch> Signed-off-by:
Jakub Kicinski <kuba@kernel.org>
-
Jakub Kicinski authored
Syzbot found a race between tun file and device destruction. NAPIs live in struct tun_file which can get destroyed before the netdev so we have to del them explicitly. The current code is missing deleting the NAPI if the queue was detached first. Fixes: 94317099 ("tun: enable NAPI for TUN/TAP driver") Reported-by:
<syzbot+b75c138e9286ac742647@syzkaller.appspotmail.com> Link: https://lore.kernel.org/r/20220623042039.2274708-1-kuba@kernel.org Signed-off-by:
Jakub Kicinski <kuba@kernel.org>
-
Eric Dumazet authored
When the third packet of 3WHS connection establishment contains payload, it is added into socket receive queue without the XFRM check and the drop of connection tracking context. This means that if the data is left unread in the socket receive queue, conntrack module can not be unloaded. As most applications usually reads the incoming data immediately after accept(), bug has been hiding for quite a long time. Commit 68822bdf ("net: generalize skb freeing deferral to per-cpu lists") exposed this bug because even if the application reads this data, the skb with nfct state could stay in a per-cpu cache for an arbitrary time, if said cpu no longer process RX softirqs. Many thanks to Ilya Maximets for reporting this issue, and for testing various patches: https://lore.kernel.org/netdev/20220619003919.394622-1-i.maximets@ovn.org/ Note that I also added a missing xfrm4_policy_check() call, although this is probably not a big issue, as the SYN packet should have been dropped earlier. Fixes: b59c2701 ("[NETFILTER]: Keep conntrack reference until IPsec policy checks are done") Reported-by:
Ilya Maximets <i.maximets@ovn.org> Signed-off-by:
Eric Dumazet <edumazet@google.com> Cc: Florian Westphal <fw@strlen.de> Cc: Pablo Neira Ayuso <pablo@netfilter.org> Cc: Steffen Klassert <steffen.klassert@secunet.com> Tested-by:
Ilya Maximets <i.maximets@ovn.org> Reviewed-by:
Ilya Maximets <i.maximets@ovn.org> Link: https://lore.kernel.org/r/20220623050436.1290307-1-edumazet@google.com Signed-off-by:
Jakub Kicinski <kuba@kernel.org>
-
Jakub Sitnicki authored
Cover the scenario when we cannot insert a socket into the sockmap, because it has it is using ULP. Failed insert should not have any effect on the ULP state. This is a regression test. Signed-off-by:
Jakub Sitnicki <jakub@cloudflare.com> Link: https://lore.kernel.org/r/20220623091231.417138-1-jakub@cloudflare.com Signed-off-by:
Jakub Kicinski <kuba@kernel.org>
-
- Jun 24, 2022
-
-
Dimitris Michailidis authored
udpgso_bench.sh has been running its IPv6 TCP test with IPv4 arguments since its initial conmit. Looks like a typo. Fixes: 3a687bef ("selftests: udp gso benchmark") Cc: willemb@google.com Signed-off-by:
Dimitris Michailidis <dmichail@fungible.com> Acked-by:
Willem de Bruijn <willemb@google.com> Link: https://lore.kernel.org/r/20220623000234.61774-1-dmichail@fungible.com Signed-off-by:
Jakub Kicinski <kuba@kernel.org>
-
Eric Dumazet authored
syzbot reported uninit-value in tcp_recvmsg() [1] Issue here is that msg->msg_get_inq should have been cleared, otherwise tcp_recvmsg() might read garbage and perform more work than needed, or have undefined behavior. Given CONFIG_INIT_STACK_ALL_ZERO=y is probably going to be the default soon, I chose to change __sys_recvfrom() to clear all fields but msghdr.addr which might be not NULL. For __copy_msghdr_from_user(), I added an explicit clear of kmsg->msg_get_inq. [1] BUG: KMSAN: uninit-value in tcp_recvmsg+0x6cf/0xb60 net/ipv4/tcp.c:2557 tcp_recvmsg+0x6cf/0xb60 net/ipv4/tcp.c:2557 inet_recvmsg+0x13a/0x5a0 net/ipv4/af_inet.c:850 sock_recvmsg_nosec net/socket.c:995 [inline] sock_recvmsg net/socket.c:1013 [inline] __sys_recvfrom+0x696/0x900 net/socket.c:2176 __do_sys_recvfrom net/socket.c:2194 [inline] __se_sys_recvfrom net/socket.c:2190 [inline] __x64_sys_recvfrom+0x122/0x1c0 net/socket.c:2190 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x3d/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x46/0xb0 Local variable msg created at: __sys_recvfrom+0x81/0x900 net/socket.c:2154 __do_sys_recvfrom net/socket.c:2194 [inline] __se_sys_recvfrom net/socket.c:2190 [inline] __x64_sys_recvfrom+0x122/0x1c0 net/socket.c:2190 CPU: 0 PID: 3493 Comm: syz-executor170 Not tainted 5.19.0-rc3-syzkaller-30868-g4b28366af7d9 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Fixes: f94fd25c ("tcp: pass back data left in socket after receive") Reported-by:
syzbot <syzkaller@googlegroups.com> Signed-off-by:
Eric Dumazet <edumazet@google.com> Reviewed-by:
Jens Axboe <axboe@kernel.dk> Tested-by:
Alexander <Potapenko<glider@google.com> Link: https://lore.kernel.org/r/20220622150220.1091182-1-edumazet@google.com Signed-off-by:
Jakub Kicinski <kuba@kernel.org>
-
Krzysztof Kozlowski authored
"mlx" Devicetree vendor prefix is not documented and instead "mellanox" should be used. Signed-off-by:
Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20220622115416.7400-1-krzysztof.kozlowski@linaro.org Signed-off-by:
Jakub Kicinski <kuba@kernel.org>
-
Doug Berger authored
The pause settings reported by the PHY should also be applied to the GMII port status override otherwise the switch will not generate pause frames towards the link partner despite the advertisement saying otherwise. Fixes: 246d7f77 ("net: dsa: add Broadcom SF2 switch driver") Signed-off-by:
Doug Berger <opendmb@gmail.com> Signed-off-by:
Florian Fainelli <f.fainelli@gmail.com> Link: https://lore.kernel.org/r/20220623030204.1966851-1-f.fainelli@gmail.com Signed-off-by:
Jakub Kicinski <kuba@kernel.org>
-
Liang He authored
of_find_node_by_name() will decrease the refcount of its first arg and we need a of_node_get() to keep refcount balance. Fixes: 7d9ee2e8 ("net: dsa: hellcreek: Add PTP status LEDs") Signed-off-by:
Liang He <windhl@126.com> Link: https://lore.kernel.org/r/20220622040621.4094304-1-windhl@126.com Signed-off-by:
Jakub Kicinski <kuba@kernel.org>
-
- Jun 23, 2022
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netLinus Torvalds authored
Pull networking fixes from Paolo Abeni: "Including fixes from bpf and netfilter. Current release - regressions: - netfilter: cttimeout: fix slab-out-of-bounds read in cttimeout_net_exit Current release - new code bugs: - bpf: ftrace: keep address offset in ftrace_lookup_symbols - bpf: force cookies array to follow symbols sorting Previous releases - regressions: - ipv4: ping: fix bind address validity check - tipc: fix use-after-free read in tipc_named_reinit - eth: veth: add updating of trans_start Previous releases - always broken: - sock: redo the psock vs ULP protection check - netfilter: nf_dup_netdev: fix skb_under_panic - bpf: fix request_sock leak in sk lookup helpers - eth: igb: fix a use-after-free issue in igb_clean_tx_ring - eth: ice: prohibit improper channel config for DCB - eth: at803x: fix null pointer dereference on AR9331 phy - eth: virtio_net: fix xdp_rxq_info bug after suspend/resume Misc: - eth: hinic: replace memcpy() with direct assignment" * tag 'net-5.19-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (47 commits) net: openvswitch: fix parsing of nw_proto for IPv6 fragments sock: redo the psock vs ULP protection check Revert "net/tls: fix tls_sk_proto_close executed repeatedly" virtio_net: fix xdp_rxq_info bug after suspend/resume igb: Make DMA faster when CPU is active on the PCIe link net: dsa: qca8k: reduce mgmt ethernet timeout net: dsa: qca8k: reset cpu port on MTU change MAINTAINERS: Add a maintainer for OCP Time Card hinic: Replace memcpy() with direct assignment Revert "drivers/net/ethernet/neterion/vxge: Fix a use-after-free bug in vxge-main.c" net: phy: smsc: Disable Energy Detect Power-Down in interrupt mode ice: ethtool: Prohibit improper channel config for DCB ice: ethtool: advertise 1000M speeds properly ice: Fix switchdev rules book keeping ice: ignore protocol field in GTP offload netfilter: nf_dup_netdev: add and use recursion counter netfilter: nf_dup_netdev: do not push mac header a second time selftests: netfilter: correct PKTGEN_SCRIPT_PATHS in nft_concat_range.sh net/tls: fix tls_sk_proto_close executed repeatedly erspan: do not assume transport header is always set ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmcLinus Torvalds authored
Pull MMC fixes from Ulf Hansson: - mtk-sd: Fix dma hang issues - sdhci-pci-o2micro: Fix card detect by dealing with debouncing * tag 'mmc-v5.19-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: mmc: mediatek: wait dma stop bit reset to 0 mmc: sdhci-pci-o2micro: Fix card detect by dealing with debouncing
-
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/soundLinus Torvalds authored
Pull sound fixes from Takashi Iwai: "All small changes, mostly device-specific: - A regression fix for PCM WC-page allocation on x86 - A regression fix for i915 audio component binding - Fixes for (longstanding) beep handling bug - Runtime PM fixes for Intel LPE HDMI audio - A couple of pending FireWire fixes - Usual HD-audio and USB-audio quirks, new Intel dspconf entries" * tag 'sound-5.19-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: ALSA: hda/realtek: Add quirk for Clevo NS50PU ALSA: hda: Fix discovery of i915 graphics PCI device ALSA: hda/via: Fix missing beep setup ALSA: hda/conexant: Fix missing beep setup ALSA: memalloc: Drop x86-specific hack for WC allocations ALSA: hda/realtek: Add quirk for Clevo PD70PNT ALSA: x86: intel_hdmi_audio: use pm_runtime_resume_and_get() ALSA: x86: intel_hdmi_audio: enable pm_runtime and set autosuspend delay ALSA: hda: intel-nhlt: remove use of __func__ in dev_dbg ALSA: hda: intel-dspcfg: use SOF for UpExtreme and UpExtreme11 boards firewire: convert sysfs sprintf/snprintf family to sysfs_emit firewire: cdev: fix potential leak of kernel stack due to uninitialized value ALSA: hda/realtek: Apply fixup for Lenovo Yoga Duet 7 properly ALSA: hda/realtek - ALC897 headset MIC no sound ALSA: usb-audio: US16x08: Move overflow check before array access ALSA: hda/realtek: Add mute LED quirk for HP Omen laptop
-
Rosemarie O'Riorden authored
When a packet enters the OVS datapath and does not match any existing flows installed in the kernel flow cache, the packet will be sent to userspace to be parsed, and a new flow will be created. The kernel and OVS rely on each other to parse packet fields in the same way so that packets will be handled properly. As per the design document linked below, OVS expects all later IPv6 fragments to have nw_proto=44 in the flow key, so they can be correctly matched on OpenFlow rules. OpenFlow controllers create pipelines based on this design. This behavior was changed by the commit in the Fixes tag so that nw_proto equals the next_header field of the last extension header. However, there is no counterpart for this change in OVS userspace, meaning that this field is parsed differently between OVS and the kernel. This is a problem because OVS creates actions based on what is parsed in userspace, but the kernel-provided flow key is used as a match criteria, as described in Documentation/networking/openvswitch.rst. This leads to issues such as packets incorrectly matching on a flow and thus the wrong list of actions being applied to the packet. Such changes in packet parsing cannot be implemented without breaking the userspace. The offending commit is partially reverted to restore the expected behavior. The change technically made sense and there is a good reason that it was implemented, but it does not comply with the original design of OVS. If in the future someone wants to implement such a change, then it must be user-configurable and disabled by default to preserve backwards compatibility with existing OVS versions. Cc: stable@vger.kernel.org Fixes: fa642f08 ("openvswitch: Derive IP protocol number for IPv6 later frags") Link: https://docs.openvswitch.org/en/latest/topics/design/#fragments Signed-off-by:
Rosemarie O'Riorden <roriorden@redhat.com> Acked-by:
Eelco Chaudron <echaudro@redhat.com> Link: https://lore.kernel.org/r/20220621204845.9721-1-roriorden@redhat.com Signed-off-by:
Paolo Abeni <pabeni@redhat.com>
-
Jakub Kicinski authored
Commit 8a59f9d1 ("sock: Introduce sk->sk_prot->psock_update_sk_prot()") has moved the inet_csk_has_ulp(sk) check from sk_psock_init() to the new tcp_bpf_update_proto() function. I'm guessing that this was done to allow creating psocks for non-inet sockets. Unfortunately the destruction path for psock includes the ULP unwind, so we need to fail the sk_psock_init() itself. Otherwise if ULP is already present we'll notice that later, and call tcp_update_ulp() with the sk_proto of the ULP itself, which will most likely result in the ULP looping its callbacks. Fixes: 8a59f9d1 ("sock: Introduce sk->sk_prot->psock_update_sk_prot()") Signed-off-by:
Jakub Kicinski <kuba@kernel.org> Reviewed-by:
John Fastabend <john.fastabend@gmail.com> Reviewed-by:
Jakub Sitnicki <jakub@cloudflare.com> Tested-by:
Jakub Sitnicki <jakub@cloudflare.com> Link: https://lore.kernel.org/r/20220620191353.1184629-2-kuba@kernel.org Signed-off-by:
Paolo Abeni <pabeni@redhat.com>
-
Jakub Kicinski authored
This reverts commit 69135c57. This commit was just papering over the issue, ULP should not get ->update() called with its own sk_prot. Each ULP would need to add this check. Fixes: 69135c57 ("net/tls: fix tls_sk_proto_close executed repeatedly") Signed-off-by:
Jakub Kicinski <kuba@kernel.org> Reviewed-by:
John Fastabend <john.fastabend@gmail.com> Link: https://lore.kernel.org/r/20220620191353.1184629-1-kuba@kernel.org Signed-off-by:
Paolo Abeni <pabeni@redhat.com>
-
Stephan Gerhold authored
The following sequence currently causes a driver bug warning when using virtio_net: # ip link set eth0 up # echo mem > /sys/power/state (or e.g. # rtcwake -s 10 -m mem) <resume> # ip link set eth0 down Missing register, driver bug WARNING: CPU: 0 PID: 375 at net/core/xdp.c:138 xdp_rxq_info_unreg+0x58/0x60 Call trace: xdp_rxq_info_unreg+0x58/0x60 virtnet_close+0x58/0xac __dev_close_many+0xac/0x140 __dev_change_flags+0xd8/0x210 dev_change_flags+0x24/0x64 do_setlink+0x230/0xdd0 ... This happens because virtnet_freeze() frees the receive_queue completely (including struct xdp_rxq_info) but does not call xdp_rxq_info_unreg(). Similarly, virtnet_restore() sets up the receive_queue again but does not call xdp_rxq_info_reg(). Actually, parts of virtnet_freeze_down() and virtnet_restore_up() are almost identical to virtnet_close() and virtnet_open(): only the calls to xdp_rxq_info_(un)reg() are missing. This means that we can fix this easily and avoid such problems in the future by just calling virtnet_close()/open() from the freeze/restore handlers. Aside from adding the missing xdp_rxq_info calls the only difference is that the refill work is only cancelled if netif_running(). However, this should not make any functional difference since the refill work should only be active if the network interface is actually up. Fixes: 754b8a21 ("virtio_net: setup xdp_rxq_info") Signed-off-by:
Stephan Gerhold <stephan.gerhold@kernkonzept.com> Acked-by:
Jesper Dangaard Brouer <brouer@redhat.com> Acked-by:
Jason Wang <jasowang@redhat.com> Link: https://lore.kernel.org/r/20220621114845.3650258-1-stephan.gerhold@kernkonzept.com Signed-off-by:
Jakub Kicinski <kuba@kernel.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queueJakub Kicinski authored
Tony Nguyen says: ==================== Intel Wired LAN Driver Updates 2022-06-21 This series contains updates to ice driver only. Marcin fixes GTP filters by allowing ignoring of the inner ethertype field. Wojciech adds VSI handle tracking in order to properly distinguish similar filters for removal. Anatolii removes ability to set 1000baseT and 1000baseX fields concurrently which caused link issues. He also disallows setting channels to less than the number of Traffic Classes which would cause NULL pointer dereference. * '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue: ice: ethtool: Prohibit improper channel config for DCB ice: ethtool: advertise 1000M speeds properly ice: Fix switchdev rules book keeping ice: ignore protocol field in GTP offload ==================== Link: https://lore.kernel.org/r/20220621224756.631765-1-anthony.l.nguyen@intel.com Signed-off-by:
Jakub Kicinski <kuba@kernel.org>
-
Kai-Heng Feng authored
Intel I210 on some Intel Alder Lake platforms can only achieve ~750Mbps Tx speed via iperf. The RR2DCDELAY shows around 0x2xxx DMA delay, which will be significantly lower when 1) ASPM is disabled or 2) SoC package c-state stays above PC3. When the RR2DCDELAY is around 0x1xxx the Tx speed can reach to ~950Mbps. According to the I210 datasheet "8.26.1 PCIe Misc. Register - PCIEMISC", "DMA Idle Indication" doesn't seem to tie to DMA coalesce anymore, so set it to 1b for "DMA is considered idle when there is no Rx or Tx AND when there are no TLPs indicating that CPU is active detected on the PCIe link (such as the host executes CSR or Configuration register read or write operation)" and performing Tx should also fall under "active CPU on PCIe link" case. In addition to that, commit b6e0c419 ("igb: Move DMA Coalescing init code to separate function.") seems to wrongly changed from enabling E1000_PCIEMISC_LX_DECISION to disabling it, also fix that. Fixes: b6e0c419 ("igb: Move DMA Coalescing init code to separate function.") Signed-off-by:
Kai-Heng Feng <kai.heng.feng@canonical.com> Tested-by: Gurucharan <gurucharanx.g@intel.com> (A Contingent worker at Intel) Signed-off-by:
Tony Nguyen <anthony.l.nguyen@intel.com> Link: https://lore.kernel.org/r/20220621221056.604304-1-anthony.l.nguyen@intel.com Signed-off-by:
Jakub Kicinski <kuba@kernel.org>
-
Christian Marangi authored
The current mgmt ethernet timeout is set to 100ms. This value is too big and would slow down any mdio command in case the mgmt ethernet packet have some problems on the receiving part. Reduce it to just 5ms to handle case when some operation are done on the master port that would cause the mgmt ethernet to not work temporarily. Fixes: 5950c7c0 ("net: dsa: qca8k: add support for mgmt read/write in Ethernet packet") Signed-off-by:
Christian Marangi <ansuelsmth@gmail.com> Link: https://lore.kernel.org/r/20220621151633.11741-1-ansuelsmth@gmail.com Signed-off-by:
Jakub Kicinski <kuba@kernel.org>
-
Christian Marangi authored
It was discovered that the Documentation lacks of a fundamental detail on how to correctly change the MAX_FRAME_SIZE of the switch. In fact if the MAX_FRAME_SIZE is changed while the cpu port is on, the switch panics and cease to send any packet. This cause the mgmt ethernet system to not receive any packet (the slow fallback still works) and makes the device not reachable. To recover from this a switch reset is required. To correctly handle this, turn off the cpu ports before changing the MAX_FRAME_SIZE and turn on again after the value is applied. Fixes: f58d2598 ("net: dsa: qca8k: implement the port MTU callbacks") Cc: stable@vger.kernel.org Signed-off-by:
Christian Marangi <ansuelsmth@gmail.com> Link: https://lore.kernel.org/r/20220621151122.10220-1-ansuelsmth@gmail.com Signed-off-by:
Jakub Kicinski <kuba@kernel.org>
-
Vadim Fedorenko authored
I've been contributing and reviewing patches for ptp_ocp driver for some time and I'm taking care of it's github mirror. On Jakub's suggestion, I would like to step forward and become a maintainer for this driver. This patch adds a dedicated entry to MAINTAINERS. Signed-off-by:
Vadim Fedorenko <vadfed@fb.com> Acked-by:
Jonathan Lemon <jonathan.lemon@gmail.com> Link: https://lore.kernel.org/r/20220621233131.21240-1-vfedorenko@novek.ru Signed-off-by:
Jakub Kicinski <kuba@kernel.org>
-
Linus Torvalds authored
Merge tag 'linux-kselftest-fixes-5.19-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest Pull Kselftest fixes from Shuah Khan: "Compile time fixes and run-time resources leaks: - Fix clang cross compilation - Fix resource leak when return error - fix compile error for dma_map_benchmark - Fix regression - make use of GUP_TEST_FILE macro" * tag 'linux-kselftest-fixes-5.19-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest: selftests: make use of GUP_TEST_FILE macro selftests: vm: Fix resource leak when return error selftests dma: fix compile error for dma_map_benchmark selftests: Fix clang cross compilation
-
Kees Cook authored
Under CONFIG_FORTIFY_SOURCE=y and CONFIG_UBSAN_BOUNDS=y, Clang is bugged here for calculating the size of the destination buffer (0x10 instead of 0x14). This copy is a fixed size (sizeof(struct fw_section_info_st)), with the source and dest being struct fw_section_info_st, so the memcpy should be safe, assuming the index is within bounds, which is UBSAN_BOUNDS's responsibility to figure out. Avoid the whole thing and just do a direct assignment. This results in no change to the executable code. [This is a duplicate of commit 2c0ab32b ("hinic: Replace memcpy() with direct assignment") which was applied to net-next.] Cc: Nick Desaulniers <ndesaulniers@google.com> Cc: Tom Rix <trix@redhat.com> Cc: llvm@lists.linux.dev Link: https://github.com/ClangBuiltLinux/linux/issues/1592 Signed-off-by:
Kees Cook <keescook@chromium.org> Reviewed-by:
Gustavo A. R. Silva <gustavoars@kernel.org> Tested-by: Nathan Chancellor <nathan@kernel.org> # build Link: https://lore.kernel.org/r/20220616052312.292861-1-keescook@chromium.org Signed-off-by:
Jakub Kicinski <kuba@kernel.org>
-
- Jun 22, 2022
-
-
Tim Crawford authored
Fixes headset detection on Clevo NS50PU. Signed-off-by:
Tim Crawford <tcrawford@system76.com> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20220622150017.9897-1-tcrawford@system76.com Signed-off-by:
Takashi Iwai <tiwai@suse.de>
-
https://github.com/martinetd/linuxLinus Torvalds authored
Pull 9pfs fixes from Dominique Martinet: "A couple of fid refcount and fscache fixes: - fid refcounting was incorrect in some corner cases and would leak resources, only freed at umount time. The first three commits fix three such cases - 'cache=loose' or fscache was broken when trying to write a partial page to a file with no read permission since the rework a few releases ago. The fix taken here is just to restore old behavior of using the special 'writeback_fid' for such reads, which is open as root/RDWR and such not get complains that we try to read on a WRONLY fid. Long-term it'd be nice to get rid of this and not issue the read at all (skip cache?) in such cases, but that direction hasn't progressed" * tag '9p-for-5.19-rc4' of https://github.com/martinetd/linux: 9p: fix EBADF errors in cached mode 9p: Fix refcounting during full path walks for fid lookups 9p: fix fid refcount leak in v9fs_vfs_get_link 9p: fix fid refcount leak in v9fs_vfs_atomic_open_dotl
-
Jakub Kicinski authored
This reverts commit 8fc74d18. BAR0 is the main (only?) register bank for this device. We most obviously can't unmap it before the netdev is unregistered. This was pointed out in review but the patch got reposted and merged, anyway. The author of the patch was only testing it with a QEMU model, which I presume does not emulate enough for the netdev to be brought up (author's replies are not visible in lore because they kept sending their emails in HTML). Link: https://lore.kernel.org/all/20220616085059.680dc215@kernel.org/ Fixes: 8fc74d18 ("drivers/net/ethernet/neterion/vxge: Fix a use-after-free bug in vxge-main.c") Signed-off-by:
Jakub Kicinski <kuba@kernel.org> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nfJakub Kicinski authored
Pablo Neira Ayuso says: ==================== Netfilter fixes for net 1) Use get_random_u32() instead of prandom_u32_state() in nft_meta and nft_numgen, from Florian Westphal. 2) Incorrect list head in nfnetlink_cttimeout in recent update coming from previous development cycle. Also from Florian. 3) Incorrect path to pktgen scripts for nft_concat_range.sh selftest. From Jie2x Zhou. 4) Two fixes for the for nft_fwd and nft_dup egress support, from Florian. * git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf: netfilter: nf_dup_netdev: add and use recursion counter netfilter: nf_dup_netdev: do not push mac header a second time selftests: netfilter: correct PKTGEN_SCRIPT_PATHS in nft_concat_range.sh netfilter: cttimeout: fix slab-out-of-bounds read typo in cttimeout_net_exit netfilter: use get_random_u32 instead of prandom ==================== Link: https://lore.kernel.org/r/20220621085618.3975-1-pablo@netfilter.org Signed-off-by:
Jakub Kicinski <kuba@kernel.org>
-
Lukas Wunner authored
Simon reports that if two LAN9514 USB adapters are directly connected without an intermediate switch, the link fails to come up and link LEDs remain dark. The issue was introduced by commit 1ce8b372 ("usbnet: smsc95xx: Forward PHY interrupts to PHY driver to avoid polling"). The PHY suffers from a known erratum wherein link detection becomes unreliable if Energy Detect Power-Down is used. In poll mode, the driver works around the erratum by briefly disabling EDPD for 640 msec to detect a neighbor, then re-enabling it to save power. In interrupt mode, no interrupt is signaled if EDPD is used by both link partners, so it must not be enabled at all. We'll recoup the power savings by enabling SUSPEND1 mode on affected LAN95xx chips in a forthcoming commit. Fixes: 1ce8b372 ("usbnet: smsc95xx: Forward PHY interrupts to PHY driver to avoid polling") Reported-by:
Simon Han <z.han@kunbus.com> Signed-off-by:
Lukas Wunner <lukas@wunner.de> Link: https://lore.kernel.org/r/439a3f3168c2f9d44b5fd9bb8d2b551711316be6.1655714438.git.lukas@wunner.de Signed-off-by:
Jakub Kicinski <kuba@kernel.org>
-
Anatolii Gerasymenko authored
Do not allow setting less channels, than Traffic Classes there are via ethtool. There must be at least one channel per Traffic Class. If you set less channels, than Traffic Classes there are, then during ice_vsi_rebuild there would be allocated only the requested amount of tx/rx rings in ice_vsi_alloc_arrays. But later in ice_vsi_setup_q_map there would be requested at least one channel per Traffic Class. This results in setting num_rxq > alloc_rxq and num_txq > alloc_txq. Later, there would be a NULL pointer dereference in ice_vsi_map_rings_to_vectors, because we go beyond of rx_rings or tx_rings arrays. Change ice_set_channels() to return error if you try to allocate less channels, than Traffic Classes there are. Change ice_vsi_setup_q_map() and ice_vsi_setup_q_map_mqprio() to return status code instead of void. Add error handling for ice_vsi_setup_q_map() and ice_vsi_setup_q_map_mqprio() in ice_vsi_init() and ice_vsi_cfg_tc(). [53753.889983] INFO: Flow control is disabled for this traffic class (0) on this vsi. [53763.984862] BUG: unable to handle kernel NULL pointer dereference at 0000000000000028 [53763.992915] PGD 14b45f5067 P4D 0 [53763.996444] Oops: 0002 [#1] SMP NOPTI [53764.000312] CPU: 12 PID: 30661 Comm: ethtool Kdump: loaded Tainted: GOE --------- - - 4.18.0-240.el8.x86_64 #1 [53764.011825] Hardware name: Intel Corporation WilsonCity/WilsonCity, BIOS WLYDCRB1.SYS.0020.P21.2012150710 12/15/2020 [53764.022584] RIP: 0010:ice_vsi_map_rings_to_vectors+0x7e/0x120 [ice] [53764.029089] Code: 41 0d 0f b7 b7 12 05 00 00 0f b6 d0 44 29 de 44 0f b7 c6 44 01 c2 41 39 d0 7d 2d 4c 8b 47 28 44 0f b7 ce 83 c6 01 4f 8b 04 c8 <49> 89 48 28 4 c 8b 89 b8 01 00 00 4d 89 08 4c 89 81 b8 01 00 00 44 [53764.048379] RSP: 0018:ff550dd88ea47b20 EFLAGS: 00010206 [53764.053884] RAX: 0000000000000002 RBX: 0000000000000004 RCX: ff385ea42fa4a018 [53764.061301] RDX: 0000000000000006 RSI: 0000000000000005 RDI: ff385e9baeedd018 [53764.068717] RBP: 0000000000000010 R08: 0000000000000000 R09: 0000000000000004 [53764.076133] R10: 0000000000000002 R11: 0000000000000004 R12: 0000000000000000 [53764.083553] R13: 0000000000000000 R14: ff385e658fdd9000 R15: ff385e9baeedd018 [53764.090976] FS: 000014872c5b5740(0000) GS:ff385e847f100000(0000) knlGS:0000000000000000 [53764.099362] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [53764.105409] CR2: 0000000000000028 CR3: 0000000a820fa002 CR4: 0000000000761ee0 [53764.112851] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [53764.120301] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [53764.127747] PKRU: 55555554 [53764.130781] Call Trace: [53764.133564] ice_vsi_rebuild+0x611/0x870 [ice] [53764.138341] ice_vsi_recfg_qs+0x94/0x100 [ice] [53764.143116] ice_set_channels+0x1a8/0x3e0 [ice] [53764.147975] ethtool_set_channels+0x14e/0x240 [53764.152667] dev_ethtool+0xd74/0x2a10 [53764.156665] ? __mod_lruvec_state+0x44/0x110 [53764.161280] ? __mod_lruvec_state+0x44/0x110 [53764.165893] ? page_add_file_rmap+0x15/0x170 [53764.170518] ? inet_ioctl+0xd1/0x220 [53764.174445] ? netdev_run_todo+0x5e/0x290 [53764.178808] dev_ioctl+0xb5/0x550 [53764.182485] sock_do_ioctl+0xa0/0x140 [53764.186512] sock_ioctl+0x1a8/0x300 [53764.190367] ? selinux_file_ioctl+0x161/0x200 [53764.195090] do_vfs_ioctl+0xa4/0x640 [53764.199035] ksys_ioctl+0x60/0x90 [53764.202722] __x64_sys_ioctl+0x16/0x20 [53764.206845] do_syscall_64+0x5b/0x1a0 [53764.210887] entry_SYSCALL_64_after_hwframe+0x65/0xca Fixes: 87324e74 ("ice: Implement ethtool ops for channels") Signed-off-by:
Anatolii Gerasymenko <anatolii.gerasymenko@intel.com> Tested-by: Gurucharan <gurucharanx.g@intel.com> (A Contingent worker at Intel) Signed-off-by:
Tony Nguyen <anthony.l.nguyen@intel.com>
-
Anatolii Gerasymenko authored
In current implementation ice_update_phy_type enables all link modes for selected speed. This approach doesn't work for 1000M speeds, because both copper (1000baseT) and optical (1000baseX) standards cannot be enabled at once. Fix this, by adding the function `ice_set_phy_type_from_speed()` for 1000M speeds. Fixes: 48cb27f2 ("ice: Implement handlers for ethtool PHY/link operations") Signed-off-by:
Anatolii Gerasymenko <anatolii.gerasymenko@intel.com> Tested-by: Gurucharan <gurucharanx.g@intel.com> (A Contingent worker at Intel) Signed-off-by:
Tony Nguyen <anthony.l.nguyen@intel.com>
-
Wojciech Drewek authored
Adding two filters with same matching criteria ends up with one rule in hardware with act = ICE_FWD_TO_VSI_LIST. In order to remove them properly we have to keep the information about vsi handle which is used in VSI bitmap (ice_adv_fltr_mgmt_list_entry::vsi_list_info::vsi_map). Fixes: 0d08a441 ("ice: ndo_setup_tc implementation for PF") Reported-by:
Sridhar Samudrala <sridhar.samudrala@intel.com> Signed-off-by:
Wojciech Drewek <wojciech.drewek@intel.com> Tested-by:
Sandeep Penigalapati <sandeep.penigalapati@intel.com> Signed-off-by:
Tony Nguyen <anthony.l.nguyen@intel.com>
-
Marcin Szycik authored
Commit 34a89775 ("ice: Add support for inner etype in switchdev") added the ability to match on inner ethertype. A side effect of that change is that it is now impossible to add some filters for protocols which do not contain inner ethtype field. tc requires the protocol field to be specified when providing certain other options, e.g. src_ip. This is a problem in case of GTP - when user wants to specify e.g. src_ip, they also need to specify protocol in tc command (otherwise tc fails with: Illegal "src_ip"). Because GTP is a tunnel, the protocol field is treated as inner protocol. GTP does not contain inner ethtype field and the filter cannot be added. To fix this, ignore the ethertype field in case of GTP filters. Fixes: 9a225f81 ("ice: Support GTP-U and GTP-C offload in switchdev") Signed-off-by:
Marcin Szycik <marcin.szycik@linux.intel.com> Tested-by:
Sandeep Penigalapati <sandeep.penigalapati@intel.com> Signed-off-by:
Tony Nguyen <anthony.l.nguyen@intel.com>
-
git://git.kernel.org/pub/scm/linux/kernel/git/efi/efiLinus Torvalds authored
Pull EFI fixes from Ard Biesheuvel: - remove pointless include of asm/efi.h, which does not exist on ia64 - fix DXE service marshalling prototype for mixed mode * tag 'efi-urgent-for-v5.19-1' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi: efi/x86: libstub: Fix typo in __efi64_argmap* name efi: sysfb_efi: remove unnecessary <asm/efi.h> include
-
git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fsLinus Torvalds authored
Pull signature checking selftest from David Howells: "The signature checking code, as used by module signing, kexec, etc., is non-FIPS compliant as there is no selftest. For a kernel to be FIPS-compliant, signature checking would have to be tested before being used, and the box would need to panic if it's not available (probably reasonable as simply disabling signature checking would prevent you from loading any driver modules). Deal with this by adding a minimal test. This is split into two patches: the first moves load_certificate_list() to the same place as the X.509 code to make it more accessible internally; the second adds a selftest" * tag 'certs-20220621' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs: certs: Add FIPS selftests certs: Move load_certificate_list() to be with the asymmetric keys code
-
git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linuxLinus Torvalds authored
Pull btrfs fixes from David Sterba: - print more error messages for invalid mount option values - prevent remount with v1 space cache for subpage filesystem - fix hang during unmount when block group reclaim task is running * tag 'for-5.19-rc3-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux: btrfs: add error messages to all unrecognized mount options btrfs: prevent remounting to v1 space cache for subpage mount btrfs: fix hang during unmount when block group reclaim task is running
-
David Howells authored
The recent patch to make afs_getattr consult the server didn't account for the pseudo-inodes employed by the dynamic root-type afs superblock not having a volume or a server to access, and thus an oops occurs if such a directory is stat'd. Fix this by checking to see if the vnode->volume pointer actually points anywhere before following it in afs_getattr(). This can be tested by stat'ing a directory in /afs. It may be sufficient just to do "ls /afs" and the oops looks something like: BUG: kernel NULL pointer dereference, address: 0000000000000020 ... RIP: 0010:afs_getattr+0x8b/0x14b ... Call Trace: <TASK> vfs_statx+0x79/0xf5 vfs_fstatat+0x49/0x62 Fixes: 2aeb8c86 ("afs: Fix afs_getattr() to refetch file status if callback break occurred") Reported-by:
Marc Dionne <marc.dionne@auristor.com> Signed-off-by:
David Howells <dhowells@redhat.com> Reviewed-by:
Marc Dionne <marc.dionne@auristor.com> Tested-by:
Marc Dionne <marc.dionne@auristor.com> cc: linux-afs@lists.infradead.org Link: https://lore.kernel.org/r/165408450783.1031787.7941404776393751186.stgit@warthog.procyon.org.uk/ Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Evgeniy Baskov authored
The actual name of the DXE services function used is set_memory_space_attributes(), not set_memory_space_descriptor(). Change EFI mixed mode helper macro name to match the function name. Fixes: 31f1a0ed ("efi/x86: libstub: Make DXE calls mixed mode safe") Signed-off-by:
Evgeniy Baskov <baskov@ispras.ru> Signed-off-by:
Ard Biesheuvel <ardb@kernel.org>
-
Javier Martinez Canillas authored
Nothing defined in the header is used by drivers/firmware/efi/sysfb_efi.c but also, including it can lead to build errors when built on arches that don't have an asm/efi.h header file. This can happen for example if a driver that is built when COMPILE_TEST is enabled selects the SYSFB symbol, e.g. on powerpc with allyesconfig: drivers/firmware/efi/sysfb_efi.c:29:10: fatal error: asm/efi.h: No such file or directory 29 | #include <asm/efi.h> | ^~~~~~~~~~~ Reported-by:
Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by:
Javier Martinez Canillas <javierm@redhat.com> Signed-off-by:
Ard Biesheuvel <ardb@kernel.org>
-
- Jun 21, 2022
-
-
David Howells authored
Add some selftests for signature checking when FIPS mode is enabled. These need to be done before we start actually using the signature checking for things and must panic the kernel upon failure. Note that the tests must not check the blacklist lest this provide a way to prevent a kernel from booting by installing a hash of a test key in the appropriate UEFI table. Reported-by:
Simo Sorce <simo@redhat.com> Signed-off-by:
David Howells <dhowells@redhat.com> Reviewed-by:
Simo Sorce <simo@redhat.com> Reviewed-by:
Herbert Xu <herbert@gondor.apana.org.au> cc: keyrings@vger.kernel.org cc: linux-crypto@vger.kernel.org Link: https://lore.kernel.org/r/165515742832.1554877.2073456606206090838.stgit@warthog.procyon.org.uk/
-
David Howells authored
Move load_certificate_list(), which loads a series of binary X.509 certificates from a blob and inserts them as keys into a keyring, to be with the asymmetric keys code that it drives. This makes it easier to add FIPS selftest code in which we need to load up a private keyring for the tests to use. Signed-off-by:
David Howells <dhowells@redhat.com> Reviewed-by:
Simo Sorce <simo@redhat.com> Reviewed-by:
Herbert Xu <herbert@gondor.apana.org.au> cc: keyrings@vger.kernel.org cc: linux-crypto@vger.kernel.org Link: https://lore.kernel.org/r/165515742145.1554877.13488098107542537203.stgit@warthog.procyon.org.uk/
-