Not needed, we can have the l4trackers fetch it themselvs.

Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

Handle common protocols (udp, tcp, ..), in the core and only
do the call if needed by the l4proto tracker.

Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

Handle the common cases (tcp, udp, etc). in the core and only
do the indirect call for the protocols that need it (GRE for instance).

Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

Handle it in the core instead.

ipv6_skip_exthdr() is built-in even if ipv6 is a module, i.e. this
doesn't create an ipv6 dependency.

Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

Its simpler to just handle it directly in nf_ct_invert_tuple().
Also gets rid of need to pass l3proto pointer to resolve_conntrack().

Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

handle everything from ctnetlink directly.

After all these years we still only support ipv4 and ipv6, so it
seems reasonable to remove l3 protocol tracker support and instead
handle ipv4/ipv6 from a common, always builtin inet tracker.

Step 1: Get rid of all the l3proto->func() calls.

Start with ctnetlink, then move on to packet-path ones.

Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

Instead of depending on it.

Signed-off-by: Máté Eckl <ecklm94@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

These versions deal with the l3proto/l4proto details internally.
It removes only caller of nf_ct_get_tuple, so make it static.

After this, l3proto->get_l4proto() can be removed in a followup patch.

Signed-off-by: Florian Westphal <fw@strlen.de>
Acked-by: Pravin B Shelar <pshelar@ovn.org>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

similar to previous change, this also allows to remove it
from nf_ipv6_ops and avoid the indirection.

It also removes the bogus dependency of nf_conntrack_ipv6 on ipv6 module:
ipv6 checksum functions are built into kernel even if CONFIG_IPV6=m,
but ipv6/netfilter.o isn't.

Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

allows to make nf_ip_checksum_partial static, it no longer
has an external caller.

Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

This function is also necessary to implement nft tproxy support

Fixes: 45ca4e0c

 ("netfilter: Libify xt_TPROXY")
Signed-off-by: Máté Eckl <ecklm94@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

This is one of the very few external callers of ->get_timeouts(),

We can use a fixed timeout instead, conntrack core will refresh this in
case a new packet comes within this period.

Use of ESTABLISHED timeout seems way too huge anyway.

Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

In the nft_reject_br_send_v4_tcp_reset(), a ttl is set by the
nf_reject_iphdr_put(). so, below code is unnecessary.

Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

Boris Pismenny says:

====================
TLS offload rx, netdev & mlx5

The following series provides TLS RX inline crypto offload.

v5->v4:
    - Remove the Kconfig to mutually exclude both IPsec and TLS

v4->v3:
    - Remove the iov revert for zero copy send flow

v2->v3:
    - Fix typo
    - Adjust cover letter
    - Fix bug in zero copy flows
    - Use network byte order for the record number in resync
    - Adjust the sequence provided in resync

v1->v2:
    - Fix bisectability problems due to variable name changes
    - Fix potential uninitialized return value

This series completes the generic infrastructure to offload TLS crypto to
a network devices. It enables the kernel TLS socket to skip decryption and
authentication operations for SKBs marked as decrypted on the receive
side of the data path. Leaving those computationally expensive operations
to the NIC.

This infrastructure doesn't require a TCP offload engine. Instead, the
NIC decrypts a packet's payload if the packet contains the expected TCP
sequence number. The TLS record authentication tag remains unmodified
regardless of decryption. If the packet is decrypted successfully and it
contains an authentication tag, then the authentication check has passed.
Otherwise, if the authentication fails, then the packet is provided
unmodified and the KTLS layer is responsible for handling it.
Out-Of-Order TCP packets are provided unmodified. As a result,
in the slow path some of the SKBs are decrypted while others remain as
ciphertext.

The GRO and TCP layers must not coalesce decrypted and non-decrypted SKBs.
At the worst case a received TLS record consists of both plaintext
and ciphertext packets. These partially decrypted records must be
reencrypted, only to be decrypted.

The notable differences between SW KTLS and NIC offloaded TLS
implementations are as follows:
1. Partial decryption - Software must handle the case of a TLS record
that was only partially decrypted by HW. This can happen due to packet
reordering.
2. Resynchronization - tls_read_size calls the device driver to
resynchronize HW whenever it lost track of the TLS record framing in
the TCP stream.

The infrastructure should be extendable to support various NIC offload
implementations.  However it is currently written with the
implementation below in mind:
The NIC identifies packets that should be offloaded according to
the 5-tuple and the TCP sequence number. If these match and the
packet is decrypted and authenticated successfully, then a syndrome
is provided to software. Otherwise, the packet is unmodified.
Decrypted and non-decrypted packets aren't coalesced by the network stack,
and the KTLS layer decrypts and authenticates partially decrypted records.
The NIC provides an indication whenever a resync is required. The resync
operation is triggered by the KTLS layer while parsing TLS record headers.

Finally, we measure the performance obtained by running single stream
iperf with two Intel(R) Xeon(R) CPU E5-2620 v3 @ 2.40GHz machines connected
back-to-back with Innova TLS (40Gbps) NICs. We compare TCP (upper bound)
and KTLS-Offload running both in Tx and Rx. The results show that the
performance of offload is comparable to TCP.

                          | Bandwidth (Gbps) | CPU Tx (%) | CPU rx (%)
TCP                       | 28.8             | 5          | 12
KTLS-Offload-Tx-Rx 	  | 28.6	     | 7          | 14

Paper: https://netdevconf.org/2.2/papers/pismenny-tlscrypto-talk.pdf


====================

Signed-off-by: David S. Miller <davem@davemloft.net>

This patch fixes the byte count indication in CQE for processed IPsec
packets that contain a metadata header.

Signed-off-by: Boris Pismenny <borisp@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch adds common functions to handle mellanox metadata headers.
These functions are used by IPsec and TLS to process FPGA metadata.

Signed-off-by: Boris Pismenny <borisp@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch enables TLS Rx based on available HW capabilities.

Signed-off-by: Boris Pismenny <borisp@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch adds software statistics for TLS to count important
events.

Signed-off-by: Boris Pismenny <borisp@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Implement the TLS rx offload data path according to the
requirements of the TLS generic NIC offload infrastructure.

Special metadata ethertype is used to pass information to
the hardware.

When hardware loses synchronization a special resync request
metadata message is used to request resync.

Signed-off-by: Boris Pismenny <borisp@mellanox.com>
Signed-off-by: Ilya Lesokhin <ilyal@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add the mlx5 implementation of the TLS Rx routines to add/del TLS
contexts, also add the tls_dev_resync_rx routine
to work with the TLS inline Rx crypto offload infrastructure.

Signed-off-by: Boris Pismenny <borisp@mellanox.com>
Signed-off-by: Ilya Lesokhin <ilyal@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

In Innova TLS, TLS contexts are added or deleted
via a command message over the SBU connection.
The HW then sends a response message over the same connection.

Complete the implementation for Innova TLS (FPGA-based) hardware by
adding support for rx inline crypto offload.

Signed-off-by: Boris Pismenny <borisp@mellanox.com>
Signed-off-by: Ilya Lesokhin <ilyal@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

For symmetry, we rename mlx5e_tls_offload_context to
mlx5e_tls_offload_context_tx before we add mlx5e_tls_offload_context_rx.

Signed-off-by: Boris Pismenny <borisp@mellanox.com>
Reviewed-by: Aviad Yehezkel <aviadye@mellanox.com>
Reviewed-by: Tariq Toukan <tariqt@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

zerocopy_from_iter iterates over the message, but it doesn't revert the
updates made by the iov iteration. This patch fixes it. Now, the iov can
be used after calling zerocopy_from_iter.

Fixes: 3c4d7559

 ("tls: kernel TLS support")
Signed-off-by: Boris Pismenny <borisp@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch completes the generic infrastructure to offload TLS crypto to a
network device. It enables the kernel to skip decryption and
authentication of some skbs marked as decrypted by the NIC. In the fast
path, all packets received are decrypted by the NIC and the performance
is comparable to plain TCP.

This infrastructure doesn't require a TCP offload engine. Instead, the
NIC only decrypts packets that contain the expected TCP sequence number.
Out-Of-Order TCP packets are provided unmodified. As a result, at the
worst case a received TLS record consists of both plaintext and ciphertext
packets. These partially decrypted records must be reencrypted,
only to be decrypted.

The notable differences between SW KTLS Rx and this offload are as
follows:
1. Partial decryption - Software must handle the case of a TLS record
that was only partially decrypted by HW. This can happen due to packet
reordering.
2. Resynchronization - tls_read_size calls the device driver to
resynchronize HW after HW lost track of TLS record framing in
the TCP stream.

Signed-off-by: Boris Pismenny <borisp@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch allows tls_set_sw_offload to fill the context in case it was
already allocated previously.

We will use it in TLS_DEVICE to fill the RX software context.

Signed-off-by: Boris Pismenny <borisp@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch splits tls_sw_release_resources_rx into two functions one
which releases all inner software tls structures and another that also
frees the containing structure.

In TLS_DEVICE we will need to release the software structures without
freeeing the containing structure, which contains other information.

Signed-off-by: Boris Pismenny <borisp@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Previously, decrypt_skb also updated the TLS context.
Now, decrypt_skb only decrypts the payload using the current context,
while decrypt_skb_update also updates the state.

Later, in the tls_device Rx flow, we will use decrypt_skb directly.

Signed-off-by: Boris Pismenny <borisp@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

For symmetry, we rename tls_offload_context to
tls_offload_context_tx before we add tls_offload_context_rx.

Signed-off-by: Boris Pismenny <borisp@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Prevent coalescing of decrypted and encrypted SKBs in GRO
and TCP layer.

Signed-off-by: Boris Pismenny <borisp@mellanox.com>
Signed-off-by: Ilya Lesokhin <ilyal@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add new netdev tls op for resynchronizing HW tls context

Signed-off-by: Boris Pismenny <borisp@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch adds a netdev feature to configure TLS RX inline crypto offload.

Signed-off-by: Ilya Lesokhin <ilyal@mellanox.com>
Signed-off-by: Boris Pismenny <borisp@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The decrypted bit is propogated to cloned/copied skbs.
This will be used later by the inline crypto receive side offload
of tls.

Signed-off-by: Boris Pismenny <borisp@mellanox.com>
Signed-off-by: Ilya Lesokhin <ilyal@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Maxime Chevallier says:

====================
net: mvpp2: add debugfs interface

The PPv2 Header Parser and Classifier are not straightforward to debug,
having easy access to some of the many lookup tables configuration is
helpful during development and debug.

This series adds a basic debugfs interface, allowing to read data from
the Header Parser and some of the Classifier tables.

For now, the interface is read-only, and contains only some basic info.

This was actually used during RSS development, and might be useful to
troubleshoot some issues we might find.

The first patch of the series converts the mvpp2 files to SPDX, which
eases adding the new debugfs dedicated file.

The second patch adds the interface, and exposes basic Header Parser data.

The 3rd patch adds a hit counter for the Header Parser TCAM.

The 4th patch exposes classifier info.

The 5th patch adds some hit counters for some of the classifier engines.

Changes since V1:
- Rebased on the lastest net-next
- Made cls_flow_get non static so that it can be used in mvpp2_debugfs
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

The classification operations that are used for RSS make use of several
lookup tables. Having hit counters for these tables is really helpful
to determine what flows were matched by ingress traffic, and see the
path of packets among all the classifier tables.

This commit adds hit counters for the 3 tables used at the moment :

 - The decoding table (also called lookup_id table), that links flows
   identified by the Header Parser to the flow table.

   There's one entry per flow, located at :
   .../mvpp2/<controller>/flows/XX/dec_hits

   Note that there are 21 flows in the decoding table, whereas there are
   52 flows in the Header Parser. That's because there are several kind
   of traffic that will match a given flow. Reading the hit counter from
   one sub-flow will clear all hit counter that have the same flow_id.

   This also applies to the flow_hits.

 - The flow table, that contains all the different lookups to be
   performed by the classifier for each packet of a given flow. The match
   is done on the first entry of the flow sequence.

 - The C2 engine entries, that are used to assign the default rx queue,
   and enable or disable RSS for a given port.

   There's one entry per flow, located at:
   .../mvpp2/<controller>/flows/XX/flow_hits

   There is one C2 entry per port, so the c2 hit counter is located at :
   .../mvpp2/<controller>/ethX/c2_hits

All hit counter values are 16-bits clear-on-read values.

Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The classifier configuration for RSS is quite complex, with several
lookup tables being used. This commit adds useful info in debugfs to
see how the different tables are configured :

Added 2 new entries in the per-port directory :

  - .../eth0/default_rxq : The default rx queue on that port
  - .../eth0/rss_enable : Indicates if RSS is enabled in the C2 entry

Added the 'flows' directory :

  It contains one entry per sub-flow. a 'sub-flow' is a unique path from
  Header Parser to the flow table. Multiple sub-flows can point to the
  same 'flow' (each flow has an id from 8 to 29, which is its index in the
  Lookup Id table) :

  - .../flows/00/...
             /01/...
             ...
             /51/id : The flow id. There are 21 unique flows. There's one
                       flow per combination of the following parameters :
                       - L4 protocol (TCP, UDP, none)
                       - L3 protocol (IPv4, IPv6)
                       - L3 parameters (Fragmented or not)
                       - L2 parameters (Vlan tag presence or not)
              .../type : The flow type. This is an even higher level flow,
                         that we manipulate with ethtool. It can be :
                         "udp4" "tcp4" "udp6" "tcp6" "ipv4" "ipv6" "other".
              .../eth0/...
              .../eth1/engine : The hash generation engine used for this
	                        flow on the given port
                  .../hash_opts : The hash generation options indicating on
                                  what data we base the hash (vlan tag, src
                                  IP, src port, etc.)

Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

One helpful feature to help debug the Header Parser TCAM filter in PPv2
is to be able to see if the entries did match something when a packet
comes in. This can be done by using the built-in hit counter for TCAM
entries.

This commit implements reading the counter, and exposing its value on
debugfs for each filter entry.

The counter is a 16-bits clear-on-read value, located at:
 .../mvpp2/<controller>/parser/XXX/hits

Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Marvell PPv2 Packer Header Parser has a TCAM based filter, that is not
trivial to configure and debug. Being able to dump TCAM entries from
userspace can be really helpful to help development of new features
and debug existing ones.

This commit adds a basic debugfs interface for the PPv2 driver, focusing
on TCAM related features.

<mnt>/mvpp2/ --- f2000000.ethernet
              \- f4000000.ethernet --- parser --- 000 ...
                                    |          \- 001
                                    |          \- ...
                                    |          \- 255 --- ai
                                    |                  \- header_data
                                    |                  \- lookup_id
                                    |                  \- sram
                                    |                  \- valid
                                    \- eth1 ...
                                    \- eth2 --- mac_filter
                                             \- parser_entries
                                             \- vid_filter

There's one directory per PPv2 instance, named after pdev->name to make
sure names are uniques. In each of these directories, there's :

 - one directory per interface on the controller, each containing :

   - "mac_filter", which lists all filtered addresses for this port
     (based on TCAM, not on the kernel's uc / mc lists)

   - "parser_entries", which lists the indices of all valid TCAM
      entries that have this port in their port map

   - "vid_filter", which lists the vids allowed on this port, based on
     TCAM

 - one "parser" directory (the parser is common to all ports), containing :

   - one directory per TCAM entry (256 of them, from 0 to 255), each
     containing :

     - "ai" : Contains the 1 byte Additional Info field from TCAM, and

     - "header_data" : Contains the 8 bytes Header Data extracted from
       the packet

     - "lookup_id" : Contains the 4 bits LU_ID

     - "sram" : contains the raw SRAM data, which is the result of the TCAM
		lookup. This readonly at the moment.

     - "valid" : Indicates if the entry is valid of not.

All entries are read-only, and everything is output in hex form.

Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Use the appropriate SPDX license identifiers and drop the license text.
This patch is only cosmetic.

Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com>
Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Daniel Borkmann says:

====================
pull-request: bpf-next 2018-07-15

The following pull-request contains BPF updates for your *net-next* tree.

The main changes are:

1) Various different arm32 JIT improvements in order to optimize code emission
   and make the JIT code itself more robust, from Russell.

2) Support simultaneous driver and offloaded XDP in order to allow for advanced
   use-cases where some work is offloaded to the NIC and some to the host. Also
   add ability for bpftool to load programs and maps beyond just the cgroup case,
   from Jakub.

3) Add BPF JIT support in nfp for multiplication as well as division. For the
   latter in particular, it uses the reciprocal algorithm to emulate it, from Jiong.

4) Add BTF pretty print functionality to bpftool in plain and JSON output
   format, from Okash.

5) Add build and installation to the BPF helper man page into bpftool, from Quentin.

6) Add a TCP BPF callback for listening sockets which is triggered right after
   the socket transitions to TCP_LISTEN state, from Andrey.

7) Add a new cgroup tree command to bpftool which iterates over the whole cgroup
   tree and prints all attached programs, from Roman.

8) Improve xdp_redirect_cpu sample to support parsing of double VLAN tagged
   packets, from Jesper.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>