- Feb 05, 2022
-
-
Jedrzej Jagielski authored
commit 3d250466 upstream. There was an AQ error I40E_AQ_RC_EINVAL when trying to reset bw limit as part of bw allocation setup. This was caused by trying to reset bw limit with DCB enabled. Bw limit should not be reset when DCB is enabled. The code was relying on the pf->flags to check if DCB is enabled but if only 1 TC is available this flag will not be set even though DCB is enabled. Add a check for number of TC and if it is 1 don't try to reset bw limit even if pf->flags shows DCB as disabled. Fixes: fa38e30a ("i40e: Fix for Tx timeouts when interface is brought up if DCB is enabled") Suggested-by: Alexander Lobakin <alexandr.lobakin@intel.com> # Flatten the condition Signed-off-by: Sylwester Dziedziuch <sylwesterx.dziedziuch@intel.com> Signed-off-by: Jedrzej Jagielski <jedrzej.jagielski@intel.com> Reviewed-by: Alexander Lobakin <alexandr.lobakin@intel.com> Tested-by: Imam Hassan Reza Biswas <imam.hassan.reza.biswas@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Georgi Valkov authored
commit 63e4b45c upstream. When rx_buf is allocated we need to account for IPHETH_IP_ALIGN, which reduces the usable size by 2 bytes. Otherwise we have 1512 bytes usable instead of 1514, and if we receive more than 1512 bytes, ipheth_rcvbulk_callback is called with status -EOVERFLOW, after which the driver malfunctiones and all communication stops. Resolves ipheth 2-1:4.2: ipheth_rcvbulk_callback: urb status: -75 Fixes: f33d9e2b ("usbnet: ipheth: fix connectivity with iOS 14") Signed-off-by: Georgi Valkov <gvalkov@abv.bg> Tested-by: Jan Kiszka <jan.kiszka@siemens.com> Link: https://lore.kernel.org/all/B60B8A4B-92A0-49B3-805D-809A2433B46C@abv.bg/ Link: https://lore.kernel.org/all/24851bd2769434a5fc24730dce8e8a984c5a4505.1643699778.git.jan.kiszka@siemens.com/ Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Roi Dayan authored
commit 5b209d1a upstream. Currently the driver adds implicit modify hdr action for decap rules on tunnel devices if the port is an ovs port. This is also done if the action is drop and makes the modify hdr redundant and also the FW doesn't support it and will generate a syndrome. kernel: mlx5_core 0000:08:00.0: mlx5_cmd_check:777:(pid 102063): SET_FLOW_TABLE_ENTRY(0x936) op_mod(0x0) failed, status bad parameter(0x3), syndrome (0x8708c3) Fix it by adding the implicit modify hdr only for fwd actions. Fixes: b16eb3c8 ("net/mlx5: Support internal port as decap route device") Fixes: 077cdda7 ("net/mlx5e: TC, Fix memory leak with rules with internal port") Signed-off-by: Roi Dayan <roid@nvidia.com> Reviewed-by: Ariel Levkovich <lariel@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Maor Dickman authored
commit d8e5883d upstream. The variable modact is not initialized before used in command modify header allocation which can cause command to fail. Fix by initializing modact with zeros. Addresses-Coverity: ("Uninitialized scalar variable") Fixes: 8f1e0b97 ("net/mlx5: E-Switch, Mark miss packets with new chain id mapping") Signed-off-by: Maor Dickman <maord@nvidia.com> Reviewed-by: Roi Dayan <roid@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Khalid Manaa authored
commit 7957837b upstream. In case the HW doesn't perform header-data split, it will write the whole packet into the data buffer in the WQ, in this case the SHAMPO CQE handler couldn't use the header entry to build the SKB, instead it should allocate a new memory to build the SKB using the function: mlx5e_skb_from_cqe_mpwrq_nonlinear. Fixes: f97d5c2a ("net/mlx5e: Add handle SHAMPO cqe support") Signed-off-by: Khalid Manaa <khalidm@nvidia.com> Reviewed-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Khalid Manaa authored
commit b8d91145 upstream. The HW doesn't wrap the CQE.shampo.header_index field according to the headers buffer size, instead it always increases it until reaching overflow of u16 size. Thus the mlx5e_handle_rx_cqe_mpwrq_shampo handler should mask the CQE header_index field to find the actual header index in the headers buffer. Fixes: f97d5c2a ("net/mlx5e: Add handle SHAMPO cqe support") Signed-off-by: Khalid Manaa <khalidm@nvidia.com> Reviewed-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Kees Cook authored
commit ad518573 upstream. In preparation for FORTIFY_SOURCE performing compile-time and run-time field bounds checking for memcpy(), memmove(), and memset(), avoid intentionally writing across neighboring fields. Use flexible arrays instead of zero-element arrays (which look like they are always overflowing) and split the cross-field memcpy() into two halves that can be appropriately bounds-checked by the compiler. We were doing: #define ETH_HLEN 14 #define VLAN_HLEN 4 ... #define MLX5E_XDP_MIN_INLINE (ETH_HLEN + VLAN_HLEN) ... struct mlx5e_tx_wqe *wqe = mlx5_wq_cyc_get_wqe(wq, pi); ... struct mlx5_wqe_eth_seg *eseg = &wqe->eth; struct mlx5_wqe_data_seg *dseg = wqe->data; ... memcpy(eseg->inline_hdr.start, xdptxd->data, MLX5E_XDP_MIN_INLINE); target is wqe->eth.inline_hdr.start (which the compiler sees as being 2 bytes in size), but copying 18, intending to write across start (really vlan_tci, 2 bytes). The remaining 16 bytes get written into wqe->data[0], covering byte_count (4 bytes), lkey (4 bytes), and addr (8 bytes). struct mlx5e_tx_wqe { struct mlx5_wqe_ctrl_seg ctrl; /* 0 16 */ struct mlx5_wqe_eth_seg eth; /* 16 16 */ struct mlx5_wqe_data_seg data[]; /* 32 0 */ /* size: 32, cachelines: 1, members: 3 */ /* last cacheline: 32 bytes */ }; struct mlx5_wqe_eth_seg { u8 swp_outer_l4_offset; /* 0 1 */ u8 swp_outer_l3_offset; /* 1 1 */ u8 swp_inner_l4_offset; /* 2 1 */ u8 swp_inner_l3_offset; /* 3 1 */ u8 cs_flags; /* 4 1 */ u8 swp_flags; /* 5 1 */ __be16 mss; /* 6 2 */ __be32 flow_table_metadata; /* 8 4 */ union { struct { __be16 sz; /* 12 2 */ u8 start[2]; /* 14 2 */ } inline_hdr; /* 12 4 */ struct { __be16 type; /* 12 2 */ __be16 vlan_tci; /* 14 2 */ } insert; /* 12 4 */ __be32 trailer; /* 12 4 */ }; /* 12 4 */ /* size: 16, cachelines: 1, members: 9 */ /* last cacheline: 16 bytes */ }; struct mlx5_wqe_data_seg { __be32 byte_count; /* 0 4 */ __be32 lkey; /* 4 4 */ __be64 addr; /* 8 8 */ /* size: 16, cachelines: 1, members: 3 */ /* last cacheline: 16 bytes */ }; So, split the memcpy() so the compiler can reason about the buffer sizes. "pahole" shows no size nor member offset changes to struct mlx5e_tx_wqe nor struct mlx5e_umr_wqe. "objdump -d" shows no meaningful object code changes (i.e. only source line number induced differences and optimizations). Fixes: b5503b99 ("net/mlx5e: XDP TX forwarding support") Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Roi Dayan authored
commit 880b5176 upstream. When changing mode to switchdev, rep bridge init registered to netdevice notifier holds the devlink lock and then takes pernet_ops_rwsem. At that time deleting a netns holds pernet_ops_rwsem and then takes the devlink lock. Example sequence is: $ ip netns add foo $ devlink dev eswitch set pci/0000:00:08.0 mode switchdev & $ ip netns del foo deleting netns trace: [ 1185.365555] ? devlink_pernet_pre_exit+0x74/0x1c0 [ 1185.368331] ? mutex_lock_io_nested+0x13f0/0x13f0 [ 1185.370984] ? xt_find_table+0x40/0x100 [ 1185.373244] ? __mutex_lock+0x24a/0x15a0 [ 1185.375494] ? net_generic+0xa0/0x1c0 [ 1185.376844] ? wait_for_completion_io+0x280/0x280 [ 1185.377767] ? devlink_pernet_pre_exit+0x74/0x1c0 [ 1185.378686] devlink_pernet_pre_exit+0x74/0x1c0 [ 1185.379579] ? devlink_nl_cmd_get_dumpit+0x3a0/0x3a0 [ 1185.380557] ? xt_find_table+0xda/0x100 [ 1185.381367] cleanup_net+0x372/0x8e0 changing mode to switchdev trace: [ 1185.411267] down_write+0x13a/0x150 [ 1185.412029] ? down_write_killable+0x180/0x180 [ 1185.413005] register_netdevice_notifier+0x1e/0x210 [ 1185.414000] mlx5e_rep_bridge_init+0x181/0x360 [mlx5_core] [ 1185.415243] mlx5e_uplink_rep_enable+0x269/0x480 [mlx5_core] [ 1185.416464] ? mlx5e_uplink_rep_disable+0x210/0x210 [mlx5_core] [ 1185.417749] mlx5e_attach_netdev+0x232/0x400 [mlx5_core] [ 1185.418906] mlx5e_netdev_attach_profile+0x15b/0x1e0 [mlx5_core] [ 1185.420172] mlx5e_netdev_change_profile+0x15a/0x1d0 [mlx5_core] [ 1185.421459] mlx5e_vport_rep_load+0x557/0x780 [mlx5_core] [ 1185.422624] ? mlx5e_stats_grp_vport_rep_num_stats+0x10/0x10 [mlx5_core] [ 1185.424006] mlx5_esw_offloads_rep_load+0xdb/0x190 [mlx5_core] [ 1185.425277] esw_offloads_enable+0xd74/0x14a0 [mlx5_core] Fix this by registering rep bridges for per net netdev notifier instead of global one, which operats on the net namespace without holding the pernet_ops_rwsem. Fixes: 19e9bfa0 ("net/mlx5: Bridge, add offload infrastructure") Signed-off-by: Roi Dayan <roid@nvidia.com> Reviewed-by: Vlad Buslov <vladbu@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Maxim Mikityanskiy authored
commit 736dfe4e upstream. The hardware spec defines max_average_bw == 0 as "unlimited bandwidth". max_average_bw is calculated as `ceil / BYTES_IN_MBIT`, which can become 0 when ceil is small, leading to an undesired effect of having no bandwidth limit. This commit fixes it by rounding up small values of ceil to 1 Mbit/s. Fixes: 214baf22 ("net/mlx5e: Support HTB offload") Signed-off-by: Maxim Mikityanskiy <maximmi@nvidia.com> Reviewed-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Dima Chumak authored
commit 55b2ca70 upstream. Only prio 1 is supported for nic mode when there is no ignore flow level support in firmware. But for switchdev mode, which supports fixed number of statically pre-allocated prios, this restriction is not relevant so it can be relaxed. Fixes: d671e109 ("net/mlx5: Fix tc max supported prio for nic mode") Signed-off-by: Dima Chumak <dchumak@nvidia.com> Reviewed-by: Roi Dayan <roid@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Roi Dayan authored
commit 5623ef8a upstream. Such rules are redundant but allowed and passed to the driver. The driver does not support offloading such rules so return an error. Fixes: 03a9d11e ("net/mlx5e: Add TC drop and mirred/redirect action parsing for SRIOV offloads") Signed-off-by: Roi Dayan <roid@nvidia.com> Reviewed-by: Oz Shlomo <ozsh@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Gal Pressman authored
commit 4a08a131 upstream. When querying the module EEPROM, there was a misusage of the 'offset' variable vs the 'query.offset' field. Fix that by always using 'offset' and assigning its value to 'query.offset' right before the mcia register read call. While at it, the cross-pages read size adjustment was changed to be more intuitive. Fixes: e19b0a34 ("net/mlx5: Refactor module EEPROM query") Reported-by: Wang Yugui <wangyugui@e16-tech.com> Signed-off-by: Gal Pressman <gal@nvidia.com> Reviewed-by: Maxim Mikityanskiy <maximmi@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Maher Sanalla authored
commit 3c5193a8 upstream. Substitute del_timer() with del_timer_sync() in fw reset polling deactivation flow, in order to prevent a race condition which occurs when del_timer() is called and timer is deactivated while another process is handling the timer interrupt. A situation that led to the following call trace: RIP: 0010:run_timer_softirq+0x137/0x420 <IRQ> recalibrate_cpu_khz+0x10/0x10 ktime_get+0x3e/0xa0 ? sched_clock_cpu+0xb/0xc0 __do_softirq+0xf5/0x2ea irq_exit_rcu+0xc1/0xf0 sysvec_apic_timer_interrupt+0x9e/0xc0 asm_sysvec_apic_timer_interrupt+0x12/0x20 </IRQ> Fixes: 38b9f903 ("net/mlx5: Handle sync reset request event") Signed-off-by: Maher Sanalla <msanalla@nvidia.com> Reviewed-by: Moshe Shemesh <moshe@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Maor Dickman authored
commit ec41332e upstream. Current implementation of bond netevent handler only check if the handled netdev is VF representor and it missing a check if the VF representor is on the same phys device of the bond handling the netevent. Fix by adding the missing check and optimizing the check if the netdev is VF representor so it will not access uninitialized private data and crashes. BUG: kernel NULL pointer dereference, address: 000000000000036c PGD 0 P4D 0 Oops: 0000 [#1] SMP NOPTI Workqueue: eth3bond0 bond_mii_monitor [bonding] RIP: 0010:mlx5e_is_uplink_rep+0xc/0x50 [mlx5_core] RSP: 0018:ffff88812d69fd60 EFLAGS: 00010282 RAX: 0000000000000000 RBX: ffff8881cf800000 RCX: 0000000000000000 RDX: ffff88812d69fe10 RSI: 000000000000001b RDI: ffff8881cf800880 RBP: ffff8881cf800000 R08: 00000445cabccf2b R09: 0000000000000008 R10: 0000000000000004 R11: 0000000000000008 R12: ffff88812d69fe10 R13: 00000000fffffffe R14: ffff88820c0f9000 R15: 0000000000000000 FS: 0000000000000000(0000) GS:ffff88846fb00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000000000000036c CR3: 0000000103d80006 CR4: 0000000000370ea0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: mlx5e_eswitch_uplink_rep+0x31/0x40 [mlx5_core] mlx5e_rep_is_lag_netdev+0x94/0xc0 [mlx5_core] mlx5e_rep_esw_bond_netevent+0xeb/0x3d0 [mlx5_core] raw_notifier_call_chain+0x41/0x60 call_netdevice_notifiers_info+0x34/0x80 netdev_lower_state_changed+0x4e/0xa0 bond_mii_monitor+0x56b/0x640 [bonding] process_one_work+0x1b9/0x390 worker_thread+0x4d/0x3d0 ? rescuer_thread+0x350/0x350 kthread+0x124/0x150 ? set_kthread_struct+0x40/0x40 ret_from_fork+0x1f/0x30 Fixes: 7e51891a ("net/mlx5e: Use netdev events to set/del egress acl forward-to-vport rule") Signed-off-by: Maor Dickman <maord@nvidia.com> Reviewed-by: Roi Dayan <roid@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Vlad Buslov authored
commit 350d9a82 upstream. Even though net_device->name is guaranteed to be null-terminated string of size<=IFNAMSIZ, the test robot complains that return value of netdev_name() can be larger: In file included from include/trace/define_trace.h:102, from drivers/net/ethernet/mellanox/mlx5/core/esw/diag/bridge_tracepoint.h:113, from drivers/net/ethernet/mellanox/mlx5/core/esw/bridge.c:12: drivers/net/ethernet/mellanox/mlx5/core/esw/diag/bridge_tracepoint.h: In function 'trace_event_raw_event_mlx5_esw_bridge_fdb_template': >> drivers/net/ethernet/mellanox/mlx5/core/esw/diag/bridge_tracepoint.h:24:29: warning: 'strncpy' output may be truncated copying 16 bytes from a string of length 20 [-Wstringop-truncation] 24 | strncpy(__entry->dev_name, | ^~~~~~~~~~~~~~~~~~~~~~~~~~ 25 | netdev_name(fdb->dev), | ~~~~~~~~~~~~~~~~~~~~~~ 26 | IFNAMSIZ); | ~~~~~~~~~ This is caused by the fact that default value of IFNAMSIZ is 16, while placeholder value that is returned by netdev_name() for unnamed net devices is larger than that. The offending code is in a tracing function that is only called for mlx5 representors, so there is no straightforward way to reproduce the issue but let's fix it for correctness sake by replacing strncpy() with strscpy() to ensure that resulting string is always null-terminated. Fixes: 9724fd5d ("net/mlx5: Bridge, add tracepoints") Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Vlad Buslov <vladbu@nvidia.com> Reviewed-by: Roi Dayan <roid@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Vlad Buslov authored
commit 04f8c12f upstream. The mlx5_esw_bridge_cleanup() is expected to be called with rtnl lock taken, which is true for mlx5e_rep_bridge_cleanup() function but not for error handling code in mlx5e_rep_bridge_init(). Add missing rtnl lock/unlock calls and extend both mlx5_esw_bridge_cleanup() and its dual function mlx5_esw_bridge_init() with ASSERT_RTNL() to verify the invariant from now on. Fixes: 7cd6a54a ("net/mlx5: Bridge, handle FDB events") Fixes: 19e9bfa0 ("net/mlx5: Bridge, add offload infrastructure") Signed-off-by: Vlad Buslov <vladbu@nvidia.com> Reviewed-by: Roi Dayan <roid@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Roi Dayan authored
commit a2446bc7 upstream. This kind of action is not supported by firmware and generates a syndrome. kernel: mlx5_core 0000:08:00.0: mlx5_cmd_check:777:(pid 102063): SET_FLOW_TABLE_ENTRY(0x936) op_mod(0x0) failed, status bad parameter(0x3), syndrome (0x8708c3) Fixes: d7e75a32 ("net/mlx5e: Add offloading of E-Switch TC pedit (header re-write) actions") Signed-off-by: Roi Dayan <roid@nvidia.com> Reviewed-by: Oz Shlomo <ozsh@nvidia.com> Reviewed-by: Maor Dickman <maord@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Raed Salem authored
commit de47db0c upstream. IPsec Tunnel mode crypto offload software parser (SWP) setting in data path currently always set the inner L4 offset regardless of the encapsulated L4 header type and whether it exists in the first place, this breaks non TCP/UDP traffic as such. Set the SWP inner L4 offset only when the IPsec tunnel encapsulated L4 header protocol is TCP/UDP. While at it fix inner ip protocol read for setting MLX5_ETH_WQE_SWP_INNER_L4_UDP flag to address the case where the ip header protocol is IPv6. Fixes: f1267798 ("net/mlx5: Fix checksum issue of VXLAN and IPsec crypto offload") Signed-off-by: Raed Salem <raeds@nvidia.com> Reviewed-by: Maor Dickman <maord@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Raed Salem authored
commit 5352859b upstream. IPsec crypto offload always set the ethernet segment checksum flags with the inner L4 header checksum flag enabled for encapsulated IPsec offloaded packet regardless of the encapsulated L4 header type, and even if it doesn't exists in the first place, this breaks non TCP/UDP traffic as such. Set the inner L4 checksum flag only when the encapsulated L4 header protocol is TCP/UDP using software parser swp_inner_l4_offset field as indication. Fixes: 5cfb540e ("net/mlx5e: Set IPsec WAs only in IP's non checksum partial case.") Signed-off-by: Raed Salem <raeds@nvidia.com> Reviewed-by: Maor Dickman <maord@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
J. Bruce Fields authored
commit d19a7af7 upstream. In my testing, we're sometimes hitting the request->fl_flags & FL_EXISTS case in posix_lock_inode, presumably just by random luck since we're not actually initializing fl_flags here. This probably didn't matter before commit 7f024fcd ("Keep read and write fds with each nlm_file") since we wouldn't previously unlock unless we knew there were locks. But now it causes lockd to give up on removing more locks. We could just initialize fl_flags, but really it seems dubious to be calling vfs_lock_file with random values in some of the fields. Fixes: 7f024fcd ("Keep read and write fds with each nlm_file") Signed-off-by: J. Bruce Fields <bfields@redhat.com> [ cel: fixed checkpatch.pl nit ] Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
J. Bruce Fields authored
commit 6e7f90d1 upstream. I thought I was iterating over the array when actually the iteration is over the values contained in the array? Ugh, keep it simple. Symptoms were a null deference in vfs_lock_file() when an NFSv3 client that previously held a lock came back up and sent a notify. Reported-by: Jonathan Woithe <jwoithe@just42.net> Fixes: 7f024fcd ("Keep read and write fds with each nlm_file") Signed-off-by: J. Bruce Fields <bfields@redhat.com> Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Miklos Szeredi authored
commit 94fd1975 upstream. Christoph Fritz is reporting that failure to copy up fileattr when upper doesn't support fileattr or xattr results in a regression. Return success in these failure cases; this reverts overlayfs to the old behavior. Add a pr_warn_once() in these cases to still let the user know about the copy up failures. Reported-by: Christoph Fritz <chf.fritz@googlemail.com> Fixes: 72db8211 ("ovl: copy up sync/noatime fileattr flags") Cc: <stable@vger.kernel.org> # v5.15 Signed-off-by: Miklos Szeredi <mszeredi@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Jonathan McDowell authored
commit 881cc731 upstream. A typo in qca808x_read_status means we try to set SMII mode on the port rather than SGMII when the link speed is not 2.5Gb/s. This results in no traffic due to the mismatch in configuration between the phy and the mac. v2: Only change interface mode when the link is up Fixes: 79c7bc05 ("net: phy: add qca8081 read_status") Cc: stable@vger.kernel.org Signed-off-by: Jonathan McDowell <noodles@earth.li> Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
John Hubbard authored
commit c36c04c2 upstream. This reverts commit 54d516b1 That commit did a refactoring that effectively combined fast and slow gup paths (again). And that was again incorrect, for two reasons: a) Fast gup and slow gup get reference counts on pages in different ways and with different goals: see Linus' writeup in commit cd1adf1b ("Revert "mm/gup: remove try_get_page(), call try_get_compound_head() directly""), and b) try_grab_compound_head() also has a specific check for "FOLL_LONGTERM && !is_pinned(page)", that assumes that the caller can fall back to slow gup. This resulted in new failures, as recently report by Will McVicker [1]. But (a) has problems too, even though they may not have been reported yet. So just revert this. Link: https://lore.kernel.org/r/20220131203504.3458775-1-willmcvicker@google.com [1] Fixes: 54d516b1 ("mm/gup: small refactoring: simplify try_grab_page()") Reported-and-tested-by: Will McVicker <willmcvicker@google.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Minchan Kim <minchan@google.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Cc: Heiko Carstens <hca@linux.ibm.com> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: stable@vger.kernel.org # 5.15 Signed-off-by: John Hubbard <jhubbard@nvidia.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Eric W. Biederman authored
commit 24f60085 upstream. The cgroup release_agent is called with call_usermodehelper. The function call_usermodehelper starts the release_agent with a full set fo capabilities. Therefore require capabilities when setting the release_agaent. Reported-by: Tabitha Sable <tabitha.c.sable@gmail.com> Tested-by: Tabitha Sable <tabitha.c.sable@gmail.com> Fixes: 81a6a5cd ("Task Control Groups: automatic userspace notification of idle cgroups") Cc: stable@vger.kernel.org # v2.6.24+ Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Maxime Ripard authored
Commit 20b0dfa8 upstream. The original commit depended on a rework commit (724fc856 ("drm/vc4: hdmi: Split the CEC disable / enable functions in two")) that (rightfully) didn't reach stable. However, probably because the context changed, when the patch was applied to stable the pm_runtime_put called got moved to the end of the vc4_hdmi_cec_adap_enable function (that would have become vc4_hdmi_cec_disable with the rework) to vc4_hdmi_cec_init. This means that at probe time, we now drop our reference to the clocks and power domains and thus end up with a CPU hang when the CPU tries to access registers. The call to pm_runtime_resume_and_get() is also problematic since the .adap_enable CEC hook is called both to enable and to disable the controller. That means that we'll now call pm_runtime_resume_and_get() at disable time as well, messing with the reference counting. The behaviour we should have though would be to have pm_runtime_resume_and_get() called when the CEC controller is enabled, and pm_runtime_put when it's disabled. We need to move things around a bit to behave that way, but it aligns stable with upstream. Cc: <stable@vger.kernel.org> # 5.10.x Cc: <stable@vger.kernel.org> # 5.15.x Cc: <stable@vger.kernel.org> # 5.16.x Reported-by: Michael Stapelberg <michael+drm@stapelberg.ch> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Alex Elder authored
commit 998c0bd2 upstream. We have seen cases where an endpoint RX completion interrupt arrives while replenishing for the endpoint is underway. This causes another instance of replenishing to begin as part of completing the receive transaction. If this occurs it can lead to transaction corruption. Use a new flag to ensure only one replenish instance for an endpoint executes at a time. Fixes: 84f9bd12 ("soc: qcom: ipa: IPA endpoints") Signed-off-by: Alex Elder <elder@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Alex Elder authored
commit c1aaa01d upstream. Define a new replenish_flags bitmap to contain Boolean flags associated with an endpoint's replenishing state. Replace the replenish_enabled field with a flag in that bitmap. This is to prepare for the next patch, which adds another flag. Signed-off-by: Alex Elder <elder@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Paolo Abeni authored
commit 9846921d upstream. MPJ ipv6 selftests currently lack per link route to the server net. Additionally, ipv6 subflows endpoints are created without any interface specified. The end-result is that in ipv6 self-tests subflows are created all on the same link, leading to expected delays and sporadic self-tests failures. Fix the issue by adding the missing setup bits. Fixes: 523514ed ("selftests: mptcp: add ADD_ADDR IPv6 test cases") Reported-and-tested-by: Geliang Tang <geliang.tang@suse.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Lukas Wunner authored
commit 23584c1e upstream. The Power Fault Detected bit in the Slot Status register differs from all other hotplug events in that it is sticky: It can only be cleared after turning off slot power. Per PCIe r5.0, sec. 6.7.1.8: If a power controller detects a main power fault on the hot-plug slot, it must automatically set its internal main power fault latch [...]. The main power fault latch is cleared when software turns off power to the hot-plug slot. The stickiness used to cause interrupt storms and infinite loops which were fixed in 2009 by commits 5651c48c ("PCI pciehp: fix power fault interrupt storm problem") and 99f0169c ("PCI: pciehp: enable software notification on empty slots"). Unfortunately in 2020 the infinite loop issue was inadvertently reintroduced by commit 8edf5332 ("PCI: pciehp: Fix MSI interrupt race"): The hardirq handler pciehp_isr() clears the PFD bit until pciehp's power_fault_detected flag is set. That happens in the IRQ thread pciehp_ist(), which never learns of the event because the hardirq handler is stuck in an infinite loop. Fix by setting the power_fault_detected flag already in the hardirq handler. Link: https://bugzilla.kernel.org/show_bug.cgi?id=214989 Link: https://lore.kernel.org/linux-pci/DM8PR11MB5702255A6A92F735D90A4446868B9@DM8PR11MB5702.namprd11.prod.outlook.com Fixes: 8edf5332 ("PCI: pciehp: Fix MSI interrupt race") Link: https://lore.kernel.org/r/66eaeef31d4997ceea357ad93259f290ededecfd.1637187226.git.lukas@wunner.de Reported-by: Joseph Bao <joseph.bao@intel.com> Tested-by: Joseph Bao <joseph.bao@intel.com> Signed-off-by: Lukas Wunner <lukas@wunner.de> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Cc: stable@vger.kernel.org # v4.19+ Cc: Stuart Hayes <stuart.w.hayes@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
- Feb 02, 2022
-
-
Greg Kroah-Hartman authored
Link: https://lore.kernel.org/r/20220131105233.561926043@linuxfoundation.org Tested-by: Jon Hunter <jonathanh@nvidia.com> Tested-by: Linux Kernel Functional Testing <lkft@linaro.org> Tested-by: Ronald Warsow <rwarsow@gmx.de> Tested-by: Shuah Khan <skhan@linuxfoundation.org> Tested-by: Florian Fainelli <f.fainelli@gmail.com> Tested-by: Zan Aziz <zanaziz313@gmail.com> Tested-by: Guenter Roeck <linux@roeck-us.net> Tested-by: Ron Economos <re@w6rz.net> Tested-By: Scott Bruce <smbruce@gmail.com> Tested-by: Bagas Sanjaya <bagasdotme@gmail.com> Tested-by: Rudi Heitbaum <rudi@heitbaum.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Geert Uytterhoeven authored
commit 33a0da68 upstream. drivers/mtd/nand/raw/mpc5121_nfc.c: In function ‘ads5121_select_chip’: drivers/mtd/nand/raw/mpc5121_nfc.c:294:19: warning: unused variable ‘mtd’ [-Wunused-variable] 294 | struct mtd_info *mtd = nand_to_mtd(nand); | ^~~ Fixes: 758b56f5 ("mtd: rawnand: Pass a nand_chip object to chip->select_chip()") Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20211122132138.3899138-1-geert@linux-m68k.org Cc: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
OGAWA Hirofumi authored
commit 3ee859e3 upstream. bio_truncate() clears the buffer outside of last block of bdev, however current bio_truncate() is using the wrong offset of page. So it can return the uninitialized data. This happened when both of truncated/corrupted FS and userspace (via bdev) are trying to read the last of bdev. Reported-by: <syzbot+ac94ae5f68b84197f41c@syzkaller.appspotmail.com> Signed-off-by: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp> Reviewed-by: Ming Lei <ming.lei@redhat.com> Link: https://lore.kernel.org/r/875yqt1c9g.fsf@mail.parknet.co.jp Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Vitaly Kuznetsov authored
commit 6cbbaab6 upstream. Hyper-V TLFS explicitly forbids VMREAD and VMWRITE instructions when Enlightened VMCS interface is in use: "Any VMREAD or VMWRITE instructions while an enlightened VMCS is active is unsupported and can result in unexpected behavior."" Windows 11 + WSL2 seems to ignore this, attempts to VMREAD VMCS field 0x4404 ("VM-exit interruption information") are observed. Failing these attempts with nested_vmx_failInvalid() makes such guests unbootable. Microsoft confirms this is a Hyper-V bug and claims that it'll get fixed eventually but for the time being we need a workaround. (Temporary) allow VMREAD to get data from the currently loaded Enlightened VMCS. Note: VMWRITE instructions remain forbidden, it is not clear how to handle them properly and hopefully won't ever be needed. Reviewed-by: Sean Christopherson <seanjc@google.com> Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com> Message-Id: <20220112170134.1904308-6-vkuznets@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Vitaly Kuznetsov authored
commit 892a42c1 upstream. In preparation to allowing reads from Enlightened VMCS from handle_vmread(), implement evmcs_field_offset() to get the correct read offset. get_evmcs_offset(), which is being used by KVM-on-Hyper-V, is almost what's needed but a few things need to be adjusted. First, WARN_ON() is unacceptable for handle_vmread() as any field can (in theory) be supplied by the guest and not all fields are defined in eVMCS v1. Second, we need to handle 'holes' in eVMCS (missing fields). It also sounds like a good idea to WARN_ON() if such fields are ever accessed by KVM-on-Hyper-V. Implement dedicated evmcs_field_offset() helper. No functional change intended. Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com> Message-Id: <20220112170134.1904308-5-vkuznets@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Vitaly Kuznetsov authored
commit 2423a4c0 upstream. vmcs_to_field_offset{,_table} may sound misleading as VMCS is an opaque blob which is not supposed to be accessed directly. In fact, vmcs_to_field_offset{,_table} are related to KVM defined VMCS12 structure. Rename vmcs_field_to_offset() to get_vmcs12_field_offset() for clarity. No functional change intended. Reviewed-by: Sean Christopherson <seanjc@google.com> Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com> Message-Id: <20220112170134.1904308-4-vkuznets@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Maor Gottlieb authored
[ Upstream commit 0226bd64 ] The cited commits replaced preemptible with pagefault_disabled and flush_kernel_dcache_page with flush_dcache_page respectively, hence need to update the corresponding defines in the test. scatterlist.c: In function ‘sg_miter_stop’: scatterlist.c:919:4: warning: implicit declaration of function ‘flush_dcache_page’ [-Wimplicit-function-declaration] flush_dcache_page(miter->page); ^~~~~~~~~~~~~~~~~ In file included from linux/scatterlist.h:8:0, from scatterlist.c:9: scatterlist.c:922:18: warning: implicit declaration of function ‘pagefault_disabled’ [-Wimplicit-function-declaration] WARN_ON_ONCE(!pagefault_disabled()); ^ linux/mm.h:23:25: note: in definition of macro ‘WARN_ON_ONCE’ int __ret_warn_on = !!(condition); \ ^~~~~~~~~ Link: https://lkml.kernel.org/r/20220118082105.1737320-1-maorg@nvidia.com Fixes: 723aca20 ("mm/scatterlist: replace the !preemptible warning in sg_miter_stop()") Fixes: 0e84f5db ("scatterlist: replace flush_kernel_dcache_page with flush_dcache_page") Signed-off-by: Maor Gottlieb <maorg@nvidia.com> Tested-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Christoph Hellwig <hch@lst.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Dmitry V. Levin authored
commit 10756dc5 upstream. As linux/nfc.h userspace compilation was finally fixed by commits 79b69a83 ("nfc: uapi: use kernel size_t to fix user-space builds") and 7175f02c ("uapi: fix linux/nfc.h userspace compilation errors"), there is no need to keep the compile-test exception for it in usr/include/Makefile. Signed-off-by: Dmitry V. Levin <ldv@altlinux.org> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Robert Hancock authored
commit b470947c upstream. A previous patch to skip part of the initialization when a USB3 PHY was not present could result in the return value being uninitialized in that case, causing spurious probe failures. Initialize ret to 0 to avoid this. Fixes: 9678f336 ("usb: dwc3: xilinx: Skip resets and USB3 register settings for USB2.0 mode") Cc: <stable@vger.kernel.org> Reviewed-by: Nathan Chancellor <nathan@kernel.org> Signed-off-by: Robert Hancock <robert.hancock@calian.com> Link: https://lore.kernel.org/r/20220127221500.177021-1-robert.hancock@calian.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Suren Baghdasaryan authored
commit 44585f7b upstream. When CONFIG_PROC_FS is disabled psi code generates the following warnings: kernel/sched/psi.c:1364:30: warning: 'psi_cpu_proc_ops' defined but not used [-Wunused-const-variable=] 1364 | static const struct proc_ops psi_cpu_proc_ops = { | ^~~~~~~~~~~~~~~~ kernel/sched/psi.c:1355:30: warning: 'psi_memory_proc_ops' defined but not used [-Wunused-const-variable=] 1355 | static const struct proc_ops psi_memory_proc_ops = { | ^~~~~~~~~~~~~~~~~~~ kernel/sched/psi.c:1346:30: warning: 'psi_io_proc_ops' defined but not used [-Wunused-const-variable=] 1346 | static const struct proc_ops psi_io_proc_ops = { | ^~~~~~~~~~~~~~~ Make definitions of these structures and related functions conditional on CONFIG_PROC_FS config. Link: https://lkml.kernel.org/r/20220119223940.787748-3-surenb@google.com Fixes: 0e94682b ("psi: introduce psi monitor") Signed-off-by: Suren Baghdasaryan <surenb@google.com> Reported-by: kernel test robot <lkp@intel.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-