Skip to content
  1. May 11, 2020
    • David Howells's avatar
      rxrpc: Fix the excessive initial retransmission timeout · c410bf01
      David Howells authored 
      rxrpc currently uses a fixed 4s retransmission timeout until the RTT is
sufficiently sampled.  This can cause problems with some fileservers with
calls to the cache manager in the afs filesystem being dropped from the
fileserver because a packet goes missing and the retransmission timeout is
greater than the call expiry timeout.

Fix this by:

 (1) Copying the RTT/RTO calculation code from Linux's TCP implementation
     and altering it to fit rxrpc.

 (2) Altering the various users of the RTT to make use of the new SRTT
     value.

 (3) Replacing the use of rxrpc_resend_timeout to use the calculated RTO
     value instead (which is needed in jiffies), along with a backoff.

Notes:

 (1) rxrpc provides RTT samples by matching the serial numbers on outgoing
     DATA packets that have the RXRPC_REQUEST_ACK set and PING ACK packets
     against the reference serial number in incoming REQUESTED ACK and
     PING-RESPONSE ACK packets.

 (2) Each packet that is transmitted on an rxrpc connection gets a new
     per-connection serial number, even for retransmissions, so an ACK can
     be cross-referenced to a specific trigger packet.  This allows RTT
     information to be drawn from retransmitted DATA packets also.

 (3) rxrpc maintains the RTT/RTO state on the rxrpc_peer record rather than
     on an rxrpc_call because many RPC calls won't live long enough to
     generate more than one sample.

 (4) The calculated SRTT value is in units of 8ths of a microsecond rather
     than nanoseconds.

The (S)RTT and RTO values are displayed in /proc/net/rxrpc/peers.

Fixes: 17926a79

 ([AF_RXRPC]: Provide secure RxRPC sockets for use by userspace and kernel both"")
Signed-off-by: default avatarDavid Howells <dhowells@redhat.com>
      c410bf01
  3. Apr 30, 2020
    • Florian Westphal's avatar
      mptcp: replace mptcp_disconnect with a stub · 42c556fe
      Florian Westphal authored 
      Paolo points out that mptcp_disconnect is bogus:
"lock_sock(sk);
looks suspicious (lock should be already held by the caller)
And call to: tcp_disconnect(sk, flags); too, sk is not a tcp
socket".

->disconnect() gets called from e.g. inet_stream_connect when
one tries to disassociate a connected socket again (to re-connect
without closing the socket first).
MPTCP however uses mptcp_stream_connect, not inet_stream_connect,
for the mptcp-socket connect call.

inet_stream_connect only gets called indirectly, for the tcp socket,
so any ->disconnect() calls end up calling tcp_disconnect for that
tcp subflow sk.

This also explains why syzkaller has not yet reported a problem
here.  So for now replace this with a stub that doesn't do anything.

Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/14


Acked-by: default avatarPaolo Abeni <pabeni@redhat.com>
Signed-off-by: default avatarFlorian Westphal <fw@strlen.de>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      42c556fe
    • Jason Yan's avatar
      net: dsa: mv88e6xxx: remove duplicate assignment of struct members · 98123074
      Jason Yan authored 
      These struct members named 'phylink_validate' was assigned twice:

static const struct mv88e6xxx_ops mv88e6190_ops = {
	......
	.phylink_validate = mv88e6390_phylink_validate,
	......
	.phylink_validate = mv88e6390_phylink_validate,
};

static const struct mv88e6xxx_ops mv88e6190x_ops = {
	......
	.phylink_validate = mv88e6390_phylink_validate,
	......
	.phylink_validate = mv88e6390x_phylink_validate,
};

static const struct mv88e6xxx_ops mv88e6191_ops = {
	......
	.phylink_validate = mv88e6390_phylink_validate,
	......
	.phylink_validate = mv88e6390_phylink_validate,
};

static const struct mv88e6xxx_ops mv88e6290_ops = {
	......
	.phylink_validate = mv88e6390_phylink_validate,
	......
	.phylink_validate = mv88e6390_phylink_validate,
};

Remove all the first one and leave the second one which are been used in
fact. Be aware that for 'mv88e6190x_ops' the assignment functions is
different while the others are all the same. This fixes the following
coccicheck warning:

drivers/net/dsa/mv88e6xxx/chip.c:3911:48-49: phylink_validate: first
occurrence line 3965, second occurrence line 3967
drivers/net/dsa/mv88e6xxx/chip.c:3970:49-50: phylink_validate: first
occurrence line 4024, second occurrence line 4026
drivers/net/dsa/mv88e6xxx/chip.c:4029:48-49: phylink_validate: first
occurrence line 4082, second occurrence line 4085
drivers/net/dsa/mv88e6xxx/chip.c:4184:48-49: phylink_validate: first
occurrence line 4238, second occurrence line 4242

Fixes: 4262c38d

 ("net: dsa: mv88e6xxx: Add SERDES stats counters to all 6390 family members")
Signed-off-by: default avatarJason Yan <yanaijie@huawei.com>
Reviewed-by: default avatarRussell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      98123074
  5. Apr 29, 2020
    • YueHaibing's avatar
      net/x25: Fix null-ptr-deref in x25_disconnect · 8999dc89
      YueHaibing authored 
      

We should check null before do x25_neigh_put in x25_disconnect,
otherwise may cause null-ptr-deref like this:

 #include <sys/socket.h>
 #include <linux/x25.h>

 int main() {
    int sck_x25;
    sck_x25 = socket(AF_X25, SOCK_SEQPACKET, 0);
    close(sck_x25);
    return 0;
 }

BUG: kernel NULL pointer dereference, address: 00000000000000d8
CPU: 0 PID: 4817 Comm: t2 Not tainted 5.7.0-rc3+ #159
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.9.3-
RIP: 0010:x25_disconnect+0x91/0xe0
Call Trace:
 x25_release+0x18a/0x1b0
 __sock_release+0x3d/0xc0
 sock_close+0x13/0x20
 __fput+0x107/0x270
 ____fput+0x9/0x10
 task_work_run+0x6d/0xb0
 exit_to_usermode_loop+0x102/0x110
 do_syscall_64+0x23c/0x260
 entry_SYSCALL_64_after_hwframe+0x49/0xb3

Reported-by: default avatar <syzbot+6db548b615e5aeefdce2@syzkaller.appspotmail.com>
Fixes: 4becb7ee

 ("net/x25: Fix x25_neigh refcnt leak when x25 disconnect")
Signed-off-by: default avatarYueHaibing <yuehaibing@huawei.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      8999dc89
    • Gavin Shan's avatar
      net/ena: Fix build warning in ena_xdp_set() · caec6619
      Gavin Shan authored 
      

This fixes the following build warning in ena_xdp_set(), which is
observed on aarch64 with 64KB page size.

   In file included from ./include/net/inet_sock.h:19,
      from ./include/net/ip.h:27,
      from drivers/net/ethernet/amazon/ena/ena_netdev.c:46:
   drivers/net/ethernet/amazon/ena/ena_netdev.c: In function         \
   ‘ena_xdp_set’:                                                    \
   drivers/net/ethernet/amazon/ena/ena_netdev.c:557:6: warning:      \
   format ‘%lu’                                                      \
   expects argument of type ‘long unsigned int’, but argument 4      \
   has type ‘int’                                                    \
   [-Wformat=] "Failed to set xdp program, the current MTU (%d) is   \
   larger than the maximum allowed MTU (%lu) while xdp is on",

Signed-off-by: default avatarGavin Shan <gshan@redhat.com>
Acked-by: default avatarShay Agroskin <shayagr@amazon.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      caec6619
  7. Apr 28, 2020
  9. Apr 26, 2020
  11. Apr 25, 2020
    • Linus Torvalds's avatar
      Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net · ab51cac0
      Linus Torvalds authored 
      Pull networking fixes from David Miller:

 1) Fix memory leak in netfilter flowtable, from Roi Dayan.

 2) Ref-count leaks in netrom and tipc, from Xiyu Yang.

 3) Fix warning when mptcp socket is never accepted before close, from
    Florian Westphal.

 4) Missed locking in ovs_ct_exit(), from Tonghao Zhang.

 5) Fix large delays during PTP synchornization in cxgb4, from Rahul
    Lakkireddy.

 6) team_mode_get() can hang, from Taehee Yoo.

 7) Need to use kvzalloc() when allocating fw tracer in mlx5 driver,
    from Niklas Schnelle.

 8) Fix handling of bpf XADD on BTF memory, from Jann Horn.

 9) Fix BPF_STX/BPF_B encoding in x86 bpf jit, from Luke Nelson.

10) Missing queue memory release in iwlwifi pcie code, from Johannes
    Berg.

11) Fix NULL deref in macvlan device event, from Taehee Yoo.

12) Initialize lan87xx phy correctly, from Yuiko Oshino.

13) Fix looping between VRF and XFRM lookups, from David Ahern.

14) etf packet scheduler assumes all sockets are full sockets, which is
    not necessarily true. From Eric Dumazet.

15) Fix mptcp data_fin handling in RX path, from Paolo Abeni.

16) fib_select_default() needs to handle nexthop objects, from David
    Ahern.

17) Use GFP_ATOMIC under spinlock in mac80211_hwsim, from Wei Yongjun.

18) vxlan and geneve use wrong nlattr array, from Sabrina Dubroca.

19) Correct rx/tx stats in bcmgenet driver, from Doug Berger.

20) BPF_LDX zero-extension is encoded improperly in x86_32 bpf jit, fix
    from Luke Nelson.

* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (100 commits)
  selftests/bpf: Fix a couple of broken test_btf cases
  tools/runqslower: Ensure own vmlinux.h is picked up first
  bpf: Make bpf_link_fops static
  bpftool: Respect the -d option in struct_ops cmd
  selftests/bpf: Add test for freplace program with expected_attach_type
  bpf: Propagate expected_attach_type when verifying freplace programs
  bpf: Fix leak in LINK_UPDATE and enforce empty old_prog_fd
  bpf, x86_32: Fix logic error in BPF_LDX zero-extension
  bpf, x86_32: Fix clobbering of dst for BPF_JSET
  bpf, x86_32: Fix incorrect encoding in BPF_LDX zero-extension
  bpf: Fix reStructuredText markup
  net: systemport: suppress warnings on failed Rx SKB allocations
  net: bcmgenet: suppress warnings on failed Rx SKB allocations
  macsec: avoid to set wrong mtu
  mac80211: sta_info: Add lockdep condition for RCU list usage
  mac80211: populate debugfs only after cfg80211 init
  net: bcmgenet: correct per TX/RX ring statistics
  net: meth: remove spurious copyright text
  net: phy: bcm84881: clear settings on link down
  chcr: Fix CPU hard lockup
  ...
      ab51cac0
    • David S. Miller's avatar
      Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf · 167ff131
      David S. Miller authored 
      

Alexei Starovoitov says:

====================
pull-request: bpf 2020-04-24

The following pull-request contains BPF updates for your *net* tree.

We've added 17 non-merge commits during the last 5 day(s) which contain
a total of 19 files changed, 203 insertions(+), 85 deletions(-).

The main changes are:

1) link_update fix, from Andrii.

2) libbpf get_xdp_id fix, from David.

3) xadd verifier fix, from Jann.

4) x86-32 JIT fixes, from Luke and Wang.

5) test_btf fix, from Stanislav.

6) freplace verifier fix, from Toke.
====================

Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      167ff131
    • Stanislav Fomichev's avatar
      selftests/bpf: Fix a couple of broken test_btf cases · e1cebd84
      Stanislav Fomichev authored 
      Commit 51c39bb1 ("bpf: Introduce function-by-function verification")
introduced function linkage flag and changed the error message from
"vlen != 0" to "Invalid func linkage" and broke some fake BPF programs.

Adjust the test accordingly.

AFACT, the programs don't really need any arguments and only look
at BTF for maps, so let's drop the args altogether.

Before:
BTF raw test[103] (func (Non zero vlen)): do_test_raw:3703:FAIL expected
err_str:vlen != 0
magic: 0xeb9f
version: 1
flags: 0x0
hdr_len: 24
type_off: 0
type_len: 72
str_off: 72
str_len: 10
btf_total_size: 106
[1] INT (anon) size=4 bits_offset=0 nr_bits=32 encoding=SIGNED
[2] INT (anon) size=4 bits_offset=0 nr_bits=32 encoding=(none)
[3] FUNC_PROTO (anon) return=0 args=(1 a, 2 b)
[4] FUNC func type_id=3 Invalid func linkage

BTF libbpf test[1] (test_btf_haskv.o): libbpf: load bpf program failed:
Invalid argument
libbpf: -- BEGIN DUMP LOG ---
libbpf:
Validating test_long_fname_2() func#1...
Arg#0 type PTR in test_long_fname_2() is not supported yet.
processed 0 insns (limit 1000000) max_states_per_insn 0 total_states 0
peak_states 0 mark_read 0

libbpf: -- END LOG --
libbpf: failed to load program 'dummy_tracepoint'
libbpf: failed to load object 'test_btf_haskv.o'
do_test_file:4201:FAIL bpf_object__load: -4007
BTF libbpf test[2] (test_btf_newkv.o): libbpf: load bpf program failed:
Invalid argument
libbpf: -- BEGIN DUMP LOG ---
libbpf:
Validating test_long_fname_2() func#1...
Arg#0 type PTR in test_long_fname_2() is not supported yet.
processed 0 insns (limit 1000000) max_states_per_insn 0 total_states 0
peak_states 0 mark_read 0

libbpf: -- END LOG --
libbpf: failed to load program 'dummy_tracepoint'
libbpf: failed to load object 'test_btf_newkv.o'
do_test_file:4201:FAIL bpf_object__load: -4007
BTF libbpf test[3] (test_btf_nokv.o): libbpf: load bpf program failed:
Invalid argument
libbpf: -- BEGIN DUMP LOG ---
libbpf:
Validating test_long_fname_2() func#1...
Arg#0 type PTR in test_long_fname_2() is not supported yet.
processed 0 insns (limit 1000000) max_states_per_insn 0 total_states 0
peak_states 0 mark_read 0

libbpf: -- END LOG --
libbpf: failed to load program 'dummy_tracepoint'
libbpf: failed to load object 'test_btf_nokv.o'
do_test_file:4201:FAIL bpf_object__load: -4007

Fixes: 51c39bb1

 ("bpf: Introduce function-by-function verification")
Signed-off-by: default avatarStanislav Fomichev <sdf@google.com>
Signed-off-by: default avatarAlexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200422003753.124921-1-sdf@google.com
      e1cebd84
    • Andrii Nakryiko's avatar
      tools/runqslower: Ensure own vmlinux.h is picked up first · dfc55ace
      Andrii Nakryiko authored 
      Reorder include paths to ensure that runqslower sources are picking up
vmlinux.h, generated by runqslower's own Makefile. When runqslower is built
from selftests/bpf, due to current -I$(BPF_INCLUDE) -I$(OUTPUT) ordering, it
might pick up not-yet-complete vmlinux.h, generated by selftests Makefile,
which could lead to compilation errors like [0]. So ensure that -I$(OUTPUT)
goes first and rely on runqslower's Makefile own dependency chain to ensure
vmlinux.h is properly completed before source code relying on it is compiled.

  [0] https://travis-ci.org/github/libbpf/libbpf/jobs/677905925



Signed-off-by: default avatarAndrii Nakryiko <andriin@fb.com>
Signed-off-by: default avatarAlexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200422012407.176303-1-andriin@fb.com
      dfc55ace
    • Zou Wei's avatar
      bpf: Make bpf_link_fops static · 6f302bfb
      Zou Wei authored 
      

Fix the following sparse warning:

kernel/bpf/syscall.c:2289:30: warning: symbol 'bpf_link_fops' was not declared. Should it be static?

Reported-by: default avatarHulk Robot <hulkci@huawei.com>
Signed-off-by: default avatarZou Wei <zou_wei@huawei.com>
Signed-off-by: default avatarAlexei Starovoitov <ast@kernel.org>
Acked-by: default avatarAndrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/1587609160-117806-1-git-send-email-zou_wei@huawei.com
      6f302bfb
    • Martin KaFai Lau's avatar
      bpftool: Respect the -d option in struct_ops cmd · 32e4c6f4
      Martin KaFai Lau authored 
      In the prog cmd, the "-d" option turns on the verifier log.
This is missed in the "struct_ops" cmd and this patch fixes it.

Fixes: 65c93628

 ("bpftool: Add struct_ops support")
Signed-off-by: default avatarMartin KaFai Lau <kafai@fb.com>
Signed-off-by: default avatarAlexei Starovoitov <ast@kernel.org>
Reviewed-by: default avatarQuentin Monnet <quentin@isovalent.com>
Link: https://lore.kernel.org/bpf/20200424182911.1259355-1-kafai@fb.com
      32e4c6f4
    • Toke Høiland-Jørgensen's avatar
      selftests/bpf: Add test for freplace program with expected_attach_type · 1d8a0af5
      Toke Høiland-Jørgensen authored 
      

This adds a new selftest that tests the ability to attach an freplace
program to a program type that relies on the expected_attach_type of the
target program to pass verification.

Signed-off-by: default avatarToke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: default avatarAlexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/158773526831.293902.16011743438619684815.stgit@toke.dk
      1d8a0af5
    • Toke Høiland-Jørgensen's avatar
      bpf: Propagate expected_attach_type when verifying freplace programs · 03f87c0b
      Toke Høiland-Jørgensen authored 
      For some program types, the verifier relies on the expected_attach_type of
the program being verified in the verification process. However, for
freplace programs, the attach type was not propagated along with the
verifier ops, so the expected_attach_type would always be zero for freplace
programs.

This in turn caused the verifier to sometimes make the wrong call for
freplace programs. For all existing uses of expected_attach_type for this
purpose, the result of this was only false negatives (i.e., freplace
functions would be rejected by the verifier even though they were valid
programs for the target they were replacing). However, should a false
positive be introduced, this can lead to out-of-bounds accesses and/or
crashes.

The fix introduced in this patch is to propagate the expected_attach_type
to the freplace program during verification, and reset it after that is
done.

Fixes: be8704ff

 ("bpf: Introduce dynamic program extensions")
Signed-off-by: default avatarToke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: default avatarAlexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/158773526726.293902.13257293296560360508.stgit@toke.dk
      03f87c0b