Use the prog_test kfuncs to test the referenced PTR_TO_BTF_ID kfunc
support, and PTR_TO_CTX, PTR_TO_MEM argument passing support. Also
testing the various failure cases for invalid kfunc prototypes.

Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20220114163953.1455836-10-memxor@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

This allows us to add tests (esp. negative tests) where we only want to
ensure the program doesn't pass through the verifier, and also verify
the error. The next commit will add the tests making use of this.

Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20220114163953.1455836-9-memxor@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

This tests that we return errors as documented, and also that the kfunc
calls work from both XDP and TC hooks.

Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20220114163953.1455836-8-memxor@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

This change adds conntrack lookup helpers using the unstable kfunc call
interface for the XDP and TC-BPF hooks. The primary usecase is
implementing a synproxy in XDP, see Maxim's patchset [0].

Export get_net_ns_by_id as nf_conntrack_bpf.c needs to call it.

This object is only built when CONFIG_DEBUG_INFO_BTF_MODULES is enabled.

  [0]: https://lore.kernel.org/bpf/20211019144655.3483197-1-maximmi@nvidia.com

Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20220114163953.1455836-7-memxor@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

This patch adds verifier support for PTR_TO_BTF_ID return type of kfunc
to be a reference, by reusing acquire_reference_state/release_reference
support for existing in-kernel bpf helpers.

We make use of the three kfunc types:

- BTF_KFUNC_TYPE_ACQUIRE
  Return true if kfunc_btf_id is an acquire kfunc.  This will
  acquire_reference_state for the returned PTR_TO_BTF_ID (this is the
  only allow return value). Note that acquire kfunc must always return a
  PTR_TO_BTF_ID{_OR_NULL}, otherwise the program is rejected.

- BTF_KFUNC_TYPE_RELEASE
  Return true if kfunc_btf_id is a release kfunc.  This will release the
  reference to the passed in PTR_TO_BTF_ID which has a reference state
  (from earlier acquire kfunc).
  The btf_check_func_arg_match returns the regno (of argument register,
  hence > 0) if the kfunc is a release kfunc, and a proper referenced
  PTR_TO_BTF_ID is being passed to it.
  This is similar to how helper call check uses bpf_call_arg_meta to
  store the ref_obj_id that is later used to release the reference.
  Similar to in-kernel helper, we only allow passing one referenced
  PTR_TO_BTF_ID as an argument. It can also be passed in to normal
  kfunc, but in case of release kfunc there must always be one
  PTR_TO_BTF_ID argument that is referenced.

- BTF_KFUNC_TYPE_RET_NULL
  For kfunc returning PTR_TO_BTF_ID, tells if it can be NULL, hence
  force caller to mark the pointer not null (using check) before
  accessing it. Note that taking into account the case fixed by commit
  93c230e3

 ("bpf: Enforce id generation for all may-be-null register type")
  we assign a non-zero id for mark_ptr_or_null_reg logic. Later, if more
  return types are supported by kfunc, which have a _OR_NULL variant, it
  might be better to move this id generation under a common
  reg_type_may_be_null check, similar to the case in the commit.

Referenced PTR_TO_BTF_ID is currently only limited to kfunc, but can be
extended in the future to other BPF helpers as well.  For now, we can
rely on the btf_struct_ids_match check to ensure we get the pointer to
the expected struct type. In the future, care needs to be taken to avoid
ambiguity for reference PTR_TO_BTF_ID passed to release function, in
case multiple candidates can release same BTF ID.

e.g. there might be two release kfuncs (or kfunc and helper):

foo(struct abc *p);
bar(struct abc *p);

... such that both release a PTR_TO_BTF_ID with btf_id of struct abc. In
this case we would need to track the acquire function corresponding to
the release function to avoid type confusion, and store this information
in the register state so that an incorrect program can be rejected. This
is not a problem right now, hence it is left as an exercise for the
future patch introducing such a case in the kernel.

Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20220114163953.1455836-6-memxor@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

BPF helpers can associate two adjacent arguments together to pass memory
of certain size, using ARG_PTR_TO_MEM and ARG_CONST_SIZE arguments.
Since we don't use bpf_func_proto for kfunc, we need to leverage BTF to
implement similar support.

The ARG_CONST_SIZE processing for helpers is refactored into a common
check_mem_size_reg helper that is shared with kfunc as well. kfunc
ptr_to_mem support follows logic similar to global functions, where
verification is done as if pointer is not null, even when it may be
null.

This leads to a simple to follow rule for writing kfunc: always check
the argument pointer for NULL, except when it is PTR_TO_CTX. Also, the
PTR_TO_CTX case is also only safe when the helper expecting pointer to
program ctx is not exposed to other programs where same struct is not
ctx type. In that case, the type check will fall through to other cases
and would permit passing other types of pointers, possibly NULL at
runtime.

Currently, we require the size argument to be suffixed with "__sz" in
the parameter name. This information is then recorded in kernel BTF and
verified during function argument checking. In the future we can use BTF
tagging instead, and modify the kernel function definitions. This will
be a purely kernel-side change.

This allows us to have some form of backwards compatibility for
structures that are passed in to the kernel function with their size,
and allow variable length structures to be passed in if they are
accompanied by a size parameter.

Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20220114163953.1455836-5-memxor@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

Completely remove the old code for check_kfunc_call to help it work
with modules, and also the callback itself.

The previous commit adds infrastructure to register all sets and put
them in vmlinux or module BTF, and concatenates all related sets
organized by the hook and the type. Once populated, these sets remain
immutable for the lifetime of the struct btf.

Also, since we don't need the 'owner' module anywhere when doing
check_kfunc_call, drop the 'btf_modp' module parameter from
find_kfunc_desc_btf.

Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20220114163953.1455836-4-memxor@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

This patch prepares the kernel to support putting all kinds of kfunc BTF
ID sets in the struct btf itself. The various kernel subsystems will
make register_btf_kfunc_id_set call in the initcalls (for built-in code
and modules).

The 'hook' is one of the many program types, e.g. XDP and TC/SCHED_CLS,
STRUCT_OPS, and 'types' are check (allowed or not), acquire, release,
and ret_null (with PTR_TO_BTF_ID_OR_NULL return type).

A maximum of BTF_KFUNC_SET_MAX_CNT (32) kfunc BTF IDs are permitted in a
set of certain hook and type for vmlinux sets, since they are allocated
on demand, and otherwise set as NULL. Module sets can only be registered
once per hook and type, hence they are directly assigned.

A new btf_kfunc_id_set_contains function is exposed for use in verifier,
this new method is faster than the existing list searching method, and
is also automatic. It also lets other code not care whether the set is
unallocated or not.

Note that module code can only do single register_btf_kfunc_id_set call
per hook. This is why sorting is only done for in-kernel vmlinux sets,
because there might be multiple sets for the same hook and type that
must be concatenated, hence sorting them is required to ensure bsearch
in btf_id_set_contains continues to work correctly.

Next commit will update the kernel users to make use of this
infrastructure.

Finally, add __maybe_unused annotation for BTF ID macros for the
!CONFIG_DEBUG_INFO_BTF case, so that they don't produce warnings during
build time.

The previous patch is also needed to provide synchronization against
initialization for module BTF's kfunc_set_tab introduced here, as
described below:

  The kfunc_set_tab pointer in struct btf is write-once (if we consider
  the registration phase (comprised of multiple register_btf_kfunc_id_set
  calls) as a single operation). In this sense, once it has been fully
  prepared, it isn't modified, only used for lookup (from the verifier
  context).

  For btf_vmlinux, it is initialized fully during the do_initcalls phase,
  which happens fairly early in the boot process, before any processes are
  present. This also eliminates the possibility of bpf_check being called
  at that point, thus relieving us of ensuring any synchronization between
  the registration and lookup function (btf_kfunc_id_set_contains).

  However, the case for module BTF is a bit tricky. The BTF is parsed,
  prepared, and published from the MODULE_STATE_COMING notifier callback.
  After this, the module initcalls are invoked, where our registration
  function will be called to populate the kfunc_set_tab for module BTF.

  At this point, BTF may be available to userspace while its corresponding
  module is still intializing. A BTF fd can then be passed to verifier
  using bpf syscall (e.g. for kfunc call insn).

  Hence, there is a race window where verifier may concurrently try to
  lookup the kfunc_set_tab. To prevent this race, we must ensure the
  operations are serialized, or waiting for the __init functions to
  complete.

  In the earlier registration API, this race was alleviated as verifier
  bpf_check_mod_kfunc_call didn't find the kfunc BTF ID until it was added
  by the registration function (called usually at the end of module __init
  function after all module resources have been initialized). If the
  verifier made the check_kfunc_call before kfunc BTF ID was added to the
  list, it would fail verification (saying call isn't allowed). The
  access to list was protected using a mutex.

  Now, it would still fail verification, but for a different reason
  (returning ENXIO due to the failed btf_try_get_module call in
  add_kfunc_call), because if the __init call is in progress the module
  will be in the middle of MODULE_STATE_COMING -> MODULE_STATE_LIVE
  transition, and the BTF_MODULE_LIVE flag for btf_module instance will
  not be set, so the btf_try_get_module call will fail.

Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20220114163953.1455836-3-memxor@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

While working on code to populate kfunc BTF ID sets for module BTF from
its initcall, I noticed that by the time the initcall is invoked, the
module BTF can already be seen by userspace (and the BPF verifier). The
existing btf_try_get_module calls try_module_get which only fails if
mod->state == MODULE_STATE_GOING, i.e. it can increment module reference
when module initcall is happening in parallel.

Currently, BTF parsing happens from MODULE_STATE_COMING notifier
callback. At this point, the module initcalls have not been invoked.
The notifier callback parses and prepares the module BTF, allocates an
ID, which publishes it to userspace, and then adds it to the btf_modules
list allowing the kernel to invoke btf_try_get_module for the BTF.

However, at this point, the module has not been fully initialized (i.e.
its initcalls have not finished). The code in module.c can still fail
and free the module, without caring for other users. However, nothing
stops btf_try_get_module from succeeding between the state transition
from MODULE_STATE_COMING to MODULE_STATE_LIVE.

This leads to a use-after-free issue when BPF program loads
successfully in the state transition, load_module's do_init_module call
fails and frees the module, and BPF program fd on close calls module_put
for the freed module. Future patch has test case to verify we don't
regress in this area in future.

There are multiple points after prepare_coming_module (in load_module)
where failure can occur and module loading can return error. We
illustrate and test for the race using the last point where it can
practically occur (in module __init function).

An illustration of the race:

CPU 0                           CPU 1
			  load_module
			    notifier_call(MODULE_STATE_COMING)
			      btf_parse_module
			      btf_alloc_id	// Published to userspace
			      list_add(&btf_mod->list, btf_modules)
			    mod->init(...)
...				^
bpf_check		        |
check_pseudo_btf_id             |
  btf_try_get_module            |
    returns true                |  ...
...                             |  module __init in progress
return prog_fd                  |  ...
...                             V
			    if (ret < 0)
			      free_module(mod)
			    ...
close(prog_fd)
 ...
 bpf_prog_free_deferred
  module_put(used_btf.mod) // use-after-free

We fix this issue by setting a flag BTF_MODULE_F_LIVE, from the notifier
callback when MODULE_STATE_LIVE state is reached for the module, so that
we return NULL from btf_try_get_module for modules that are not fully
formed. Since try_module_get already checks that module is not in
MODULE_STATE_GOING state, and that is the only transition a live module
can make before being removed from btf_modules list, this is enough to
close the race and prevent the bug.

A later selftest patch crafts the race condition artifically to verify
that it has been fixed, and that verifier fails to load program (with
ENXIO).

Lastly, a couple of comments:

 1. Even if this race didn't exist, it seems more appropriate to only
    access resources (ksyms and kfuncs) of a fully formed module which
    has been initialized completely.

 2. This patch was born out of need for synchronization against module
    initcall for the next patch, so it is needed for correctness even
    without the aforementioned race condition. The BTF resources
    initialized by module initcall are set up once and then only looked
    up, so just waiting until the initcall has finished ensures correct
    behavior.

Fixes: 541c3bad

 ("bpf: Support BPF ksym variables in kernel modules")
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20220114163953.1455836-2-memxor@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

'lport' and 'rport' in bpf_prog1() of sockmap_verdict_prog.c is not
used, just remove them.

Signed-off-by: Menglong Dong <imagedong@tencent.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Song Liu <songliubraving@fb.com>
Link: https://lore.kernel.org/bpf/20220113031658.633290-1-imagedong@tencent.com

resolve_btfids is built using $(HOSTCC) and $(HOSTLD) but does not
pick up the corresponding flags. As a result, host-specific settings
(such as a sysroot specified via HOSTCFLAGS=--sysroot=..., or a linker
specified via HOSTLDFLAGS=-fuse-ld=...) will not be respected.

Fix this by setting CFLAGS to KBUILD_HOSTCFLAGS and LDFLAGS to
KBUILD_HOSTLDFLAGS.

Also pass the cflags through to libbpf via EXTRA_CFLAGS to ensure that
the host libbpf is built with flags consistent with resolve_btfids.

Signed-off-by: Connor O'Brien <connoro@google.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Song Liu <songliubraving@fb.com>
Link: https://lore.kernel.org/bpf/20220112002503.115968-1-connoro@google.com

Currently bpf_helper_defs.h and the bpf helpers man page are auto-generated
using function documentation present in bpf.h. If the documentation for the
helper is missing or doesn't follow a specific format for e.g. if a function
is documented as:
 * long bpf_kallsyms_lookup_name( const char *name, int name_sz, int flags, u64 *res )
instead of
 * long bpf_kallsyms_lookup_name(const char *name, int name_sz, int flags, u64 *res)
(notice the extra space at the start and end of function arguments)
then that helper is not dumped in the auto-generated header and results in
an invalid call during eBPF runtime, even if all the code specific to the
helper is correct.

This patch checks the number of functions documented within the header file
with those present as part of #define __BPF_FUNC_MAPPER and raises an
Exception if they don't match. It is not needed with the currently documented
upstream functions, but can help in debugging when developing new helpers
when there might be missing or misformatted documentation.

Signed-off-by: Usama Arif <usama.arif@bytedance.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Reviewed-by: Quentin Monnet <quentin@isovalent.com>
Acked-by: Song Liu <songliubraving@fb.com>
Link: https://lore.kernel.org/bpf/20220112114953.722380-1-usama.arif@bytedance.com

Christy Lee says:

====================

bpf_map__def() is rarely used and non-extensible. bpf_map_def fields
can be accessed with appropriate map getters and setters instead.
Deprecate bpf_map__def() API and replace use cases with getters and
setters.

Changelog:
----------
v1 -> v2:
https://lore.kernel.org/all/20220105230057.853163-1-christylee@fb.com/

* Fixed commit messages to match commit titles
* Fixed indentation
* Removed bpf_map__def() usage that was missed in v1
====================

Signed-off-by: Andrii Nakryiko <andrii@kernel.org>

All fields accessed via bpf_map_def can now be accessed via
appropirate getters and setters. Mark bpf_map__def() API as deprecated.

Signed-off-by: Christy Lee <christylee@fb.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20220108004218.355761-6-christylee@fb.com

After `bpftool gen skeleton`, the ${bpf_app}.skel.h will provide that
${bpf_app_name}__open helper to load bpf. If there is some error
like ENOMEM, the ${bpf_app_name}__open will rollback(free) the allocated
object, including `bpf_object_skeleton`.

Since the ${bpf_app_name}__create_skeleton set the obj->skeleton first
and not rollback it when error, it will cause double-free in
${bpf_app_name}__destory at ${bpf_app_name}__open. Therefore, we should
set the obj->skeleton before return 0;

Fixes: 5dc7a8b2

 ("bpftool, selftests/bpf: Embed object file inside skeleton")
Signed-off-by: Wei Fu <fuweid89@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20220108084008.1053111-1-fuweid89@gmail.com

libbpf bpf_map__def() API is being deprecated, replace selftests/bpf's
usage with the appropriate getters and setters.

Signed-off-by: Christy Lee <christylee@fb.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20220108004218.355761-5-christylee@fb.com

libbpf bpf_map__def() API is being deprecated, replace perf's
usage with the appropriate getters and setters.

Signed-off-by: Christy Lee <christylee@fb.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20220108004218.355761-4-christylee@fb.com

libbpf bpf_map__def() API is being deprecated, replace bpftool's
usage with the appropriate getters and setters

Signed-off-by: Christy Lee <christylee@fb.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20220108004218.355761-3-christylee@fb.com

libbpf bpf_map__def() API is being deprecated, replace samples/bpf's
usage with the appropriate getters and setters.

Signed-off-by: Christy Lee <christylee@fb.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20220108004218.355761-2-christylee@fb.com

When I checked the code in skeleton header file generated with my own
bpf prog, I found there may be possible NULL pointer dereference when
destroying skeleton. Then I checked the in-tree bpf progs, finding that is
a common issue. Let's take the generated samples/bpf/xdp_redirect_cpu.skel.h
for example. Below is the generated code in
xdp_redirect_cpu__create_skeleton():

	xdp_redirect_cpu__create_skeleton
		struct bpf_object_skeleton *s;
		s = (struct bpf_object_skeleton *)calloc(1, sizeof(*s));
		if (!s)
			goto error;
		...
	error:
		bpf_object__destroy_skeleton(s);
		return  -ENOMEM;

After goto error, the NULL 's' will be deferenced in
bpf_object__destroy_skeleton().

We can simply fix this issue by just adding a NULL check in
bpf_object__destroy_skeleton().

Fixes: d66562fb

 ("libbpf: Add BPF object skeleton support")
Signed-off-by: Yafang Shao <laoar.shao@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20220108134739.32541-1-laoar.shao@gmail.com

Christy Lee says:

====================

All xattr APIs are being dropped, mark bpf_prog_attach_opts() as deprecated
and rename to bpf_prog_attach_xattr(). Replace all usages of the deprecated
function with the new function name.

  [0] Closes: https://github.com/libbpf/libbpf/issues/285

Changelog:
----------
v2 -> v3:
https://lore.kernel.org/all/20220106234639.1418484-2-christylee@fb.com/

* Fixed build break

v1 -> v2:
https://lore.kernel.org/all/20211230000110.1068538-1-christylee@fb.com/

* Used alias instead of returning original function
* Split out selftests to a different commit
====================

Signed-off-by: Andrii Nakryiko <andrii@kernel.org>

bpf_prog_attach_opts() is being deprecated and renamed to
bpf_prog_attach_xattr(). Change all selftests/bpf's uage to the new name.

Signed-off-by: Christy Lee <christylee@fb.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20220107184604.3668544-3-christylee@fb.com

All xattr APIs are being dropped, let's converge to the convention used in
high-level APIs and rename bpf_prog_attach_xattr to bpf_prog_attach_opts.

Signed-off-by: Christy Lee <christylee@fb.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20220107184604.3668544-2-christylee@fb.com

hashmap__new() encodes errors with ERR_PTR(), hence it's not valid to
check the returned pointer against NULL and IS_ERR() has to be used
instead.

libbpf_get_error() can't be used in this case as hashmap__new() is not
part of the public libbpf API and it'll continue using ERR_PTR() after
libbpf 1.0.

Fixes: 8f184732 ("bpftool: Switch to libbpf's hashmap for pinned paths of BPF objects")
Fixes: 2828d0d7 ("bpftool: Switch to libbpf's hashmap for programs/maps in BTF listing")
Fixes: d6699f8e

 ("bpftool: Switch to libbpf's hashmap for PIDs/names references")
Signed-off-by: Mauricio Vásquez <mauricio@kinvolk.io>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Reviewed-by: Quentin Monnet <quentin@isovalent.com>
Acked-by: Song Liu <songliubraving@fb.com>
Link: https://lore.kernel.org/bpf/20220107152620.192327-2-mauricio@kinvolk.io

hashmap__new() uses ERR_PTR() to return an error so it's better to
use IS_ERR_OR_NULL() in order to check the pointer before calling
free(). This will prevent freeing an invalid pointer if somebody calls
hashmap__free() with the result of a failed hashmap__new() call.

Signed-off-by: Mauricio Vásquez <mauricio@kinvolk.io>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Song Liu <songliubraving@fb.com>
Link: https://lore.kernel.org/bpf/20220107152620.192327-1-mauricio@kinvolk.io

Pull device properties framework updates from Rafael Wysocki:
 "These update the handling of software nodes and graph properties, and
  the MAINTAINERS entry for the former.

  Specifics:

   - Remove device_add_properties() which does not work correctly if
     software nodes holding additional device properties are shared or
     reused (Heikki Krogerus).

   - Fix nargs_prop property handling for software nodes (Clément
     Léger).

   - Update documentation of ACPI device properties (Sakari Ailus).

   - Update the handling of graph properties in the generic framework to
     match the DT case (Sakari Ailus).

   - Update software nodes entry in MAINTAINERS (Andy Shevchenko)"

* tag 'devprop-5.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  software node: Update MAINTAINERS data base
  software node: fix wrong node passed to find nargs_prop
  device property: Drop fwnode_graph_get_remote_node()
  device property: Use fwnode_graph_for_each_endpoint() macro
  device property: Implement fwnode_graph_get_endpoint_count()
  Documentation: ACPI: Update references
  Documentation: ACPI: Fix data node reference documentation
  device property: Fix documentation for FWNODE_GRAPH_DEVICE_DISABLED
  device property: Fix fwnode_graph_devcon_match() fwnode leak
  device property: Remove device_add_properties() API
  driver core: Don't call device_remove_properties() from device_del()
  PCI: Convert to device_create_managed_software_node()

Pull thermal control updates from Rafael Wysocki:
 "These add a new driver for Renesas RZ/G2L TSU, update a few existing
  thermal control drivers and clean up the tmon utility.

  Specifics:

   - Add new TSU driver and DT bindings for the Renesas RZ/G2L platform
     (Biju Das).

   - Fix missing check when calling reset_control_deassert() in the
     rz2gl thermal driver (Biju Das).

   - In preparation for FORTIFY_SOURCE performing compile-time and
     run-time field bounds checking for memcpy(), avoid intentionally
     writing across neighboring fields in the int340x thermal control
     driver (Kees Cook).

   - Fix RFIM mailbox write commands handling in the int340x thermal
     control driver (Sumeet Pawnikar).

   - Fix PM issue occurring in the iMX thermal control driver during
     suspend/resume by implementing PM runtime support in it (Oleksij
     Rempel).

   - Add 'const' annotation to thermal_cooling_ops in the Intel
     powerclamp driver (Rikard Falkeborn).

   - Fix missing ADC bit set in the iMX8MP thermal driver to enable the
     sensor (Paul Gerber).

   - Drop unused local variable definition from tmon (ran jianping)"

* tag 'thermal-5.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  thermal/drivers/int340x: Fix RFIM mailbox write commands
  thermal/drivers/rz2gl: Add error check for reset_control_deassert()
  thermal/drivers/imx8mm: Enable ADC when enabling monitor
  thermal/drivers: Add TSU driver for RZ/G2L
  dt-bindings: thermal: Document Renesas RZ/G2L TSU
  thermal/drivers/intel_powerclamp: Constify static thermal_cooling_device_ops
  thermal/drivers/imx: Implement runtime PM support
  thermal: tools: tmon: remove unneeded local variable
  thermal: int340x: Use struct_group() for memcpy() region

Pull power management updates from Rafael Wysocki:
 "The most signigicant change here is the addition of a new cpufreq
  'P-state' driver for AMD processors as a better replacement for the
  venerable acpi-cpufreq driver.

  There are also other cpufreq updates (in the core, intel_pstate, ARM
  drivers), PM core updates (mostly related to adding new macros for
  declaring PM operations which should make the lives of driver
  developers somewhat easier), and a bunch of assorted fixes and
  cleanups.

  Summary:

   - Add new P-state driver for AMD processors (Huang Rui).

   - Fix initialization of min and max frequency QoS requests in the
     cpufreq core (Rafael Wysocki).

   - Fix EPP handling on Alder Lake in intel_pstate (Srinivas
     Pandruvada).

   - Make intel_pstate update cpuinfo.max_freq when notified of HWP
     capabilities changes and drop a redundant function call from that
     driver (Rafael Wysocki).

   - Improve IRQ support in the Qcom cpufreq driver (Ard Biesheuvel,
     Stephen Boyd, Vladimir Zapolskiy).

   - Fix double devm_remap() in the Mediatek cpufreq driver (Hector
     Yuan).

   - Introduce thermal pressure helpers for cpufreq CPU cooling (Lukasz
     Luba).

   - Make cpufreq use default_groups in kobj_type (Greg Kroah-Hartman).

   - Make cpuidle use default_groups in kobj_type (Greg Kroah-Hartman).

   - Fix two comments in cpuidle code (Jason Wang, Yang Li).

   - Allow model-specific normal EPB value to be used in the intel_epb
     sysfs attribute handling code (Srinivas Pandruvada).

   - Simplify locking in pm_runtime_put_suppliers() (Rafael Wysocki).

   - Add safety net to supplier device release in the runtime PM core
     code (Rafael Wysocki).

   - Capture device status before disabling runtime PM for it (Rafael
     Wysocki).

   - Add new macros for declaring PM operations to allow drivers to
     avoid guarding them with CONFIG_PM #ifdefs or __maybe_unused and
     update some drivers to use these macros (Paul Cercueil).

   - Allow ACPI hardware signature to be honoured during restore from
     hibernation (David Woodhouse).

   - Update outdated operating performance points (OPP) documentation
     (Tang Yizhou).

   - Reduce log severity for informative message regarding frequency
     transition failures in devfreq (Tzung-Bi Shih).

   - Add DRAM frequency controller devfreq driver for Allwinner sunXi
     SoCs (Samuel Holland).

   - Add missing COMMON_CLK dependency to sun8i devfreq driver (Arnd
     Bergmann).

   - Add support for new layout of Psys PowerLimit Register on SPR to
     the Intel RAPL power capping driver (Zhang Rui).

   - Fix typo in a comment in idle_inject.c (Jason Wang).

   - Remove unused function definition from the DTPM (Dynamit Thermal
     Power Management) power capping framework (Daniel Lezcano).

   - Reduce DTPM trace verbosity (Daniel Lezcano)"

* tag 'pm-5.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (53 commits)
  x86, sched: Fix undefined reference to init_freq_invariance_cppc() build error
  cpufreq: amd-pstate: Fix Kconfig dependencies for AMD P-State
  cpufreq: amd-pstate: Fix struct amd_cpudata kernel-doc comment
  cpuidle: use default_groups in kobj_type
  x86: intel_epb: Allow model specific normal EPB value
  MAINTAINERS: Add AMD P-State driver maintainer entry
  Documentation: amd-pstate: Add AMD P-State driver introduction
  cpufreq: amd-pstate: Add AMD P-State performance attributes
  cpufreq: amd-pstate: Add AMD P-State frequencies attributes
  cpufreq: amd-pstate: Add boost mode support for AMD P-State
  cpufreq: amd-pstate: Add trace for AMD P-State module
  cpufreq: amd-pstate: Introduce the support for the processors with shared memory solution
  cpufreq: amd-pstate: Add fast switch function for AMD P-State
  cpufreq: amd-pstate: Introduce a new AMD P-State driver to support future processors
  ACPI: CPPC: Add CPPC enable register function
  ACPI: CPPC: Check present CPUs for determining _CPC is valid
  ACPI: CPPC: Implement support for SystemIO registers
  x86/msr: Add AMD CPPC MSR definitions
  x86/cpufeatures: Add AMD Collaborative Processor Performance Control feature flag
  cpufreq: use default_groups in kobj_type
  ...

Pull ACPI updates from Rafael Wysocki:
 "These are usual ACPICA code updates (although there are more of them
  than in the last few releases), a noticeable EC driver update (which
  mostly consists of cleanups, though), the device enumeration quirks
  handling rework from Hans, some updates eliminating unnecessary CPU
  cache flushing in some places (processor idle and system-wide PM code)
  and a bunch of assorted cleanups and fixes.

  Specifics:

   - Update ACPICA code in the kernel to the 20211217 upstream release
     including the following changes:

      - iASL/Disassembler: Additional support for NHLT table (Bob
        Moore).
      - Change a return_ACPI_STATUS (AE_BAD_PARAMETER) (Bob Moore).
      - Fix a couple of warnings under MSVC (Bob Moore).
      - iASL: Add TDEL table to both compiler/disassembler (Bob Moore).
      - iASL/NHLT table: "Specific Data" field support (Bob Moore).
      - Use original data_table_region pointer for accesses (Jessica
        Clarke).
      - Use original pointer for virtual origin tables (Jessica Clarke).
      - Macros: Remove ACPI_PHYSADDR_TO_PTR (Jessica Clarke).
      - Avoid subobject buffer overflow when validating RSDP signature
        (Jessica Clarke).
      - iASL: Add suppport for AGDI table (Ilkka Koskinen).
      - Hardware: Do not flush CPU cache when entering S4 and S5 (Kirill
        A. Shutemov).
      - Expand the ACPI_ACCESS_ definitions (Mark Langsdorf).
      - Utilities: Avoid deleting the same object twice in a row (Rafael
        Wysocki).
      - Executer: Fix REFCLASS_REFOF case in acpi_ex_opcode_1A_0T_1R()
        (Rafael Wysocki).
      - Fix AEST Processor generic resource substructure data field byte
        length (Shuuichirou Ishii).
      - Fix wrong interpretation of PCC address (Sudeep Holla).
      - Add support for PCC Opregion special context data (Sudeep
        Holla).

   - Implement OperationRegion handler for PCC Type 3 subtype (Sudeep
     Holla).

   - Introduce acpi_fetch_acpi_dev() as a replacement for
     acpi_bus_get_device() and use it in the ACPI subsystem (Rafael
     Wysocki).

   - Avoid using _CID for device enumaration if _HID is missing or
     invalid (Rafael Wysocki).

   - Rework quirk handling during ACPI device enumeration and add some
     new quirks for known broken platforms (Hans de Goede).

   - Avoid unnecessary or redundant CPU cache flushing during system PM
     transitions (Kirill A. Shutemov).

   - Add PM debug messages related to power resources (Rafael Wysocki).

   - Fix kernel-doc comment in the PCI host bridge ACPI driver (Yang
     Li).

   - Rework flushing of EC work while suspended to idle and clean up the
     handling of events in the ACPI EC driver (Rafael Wysocki).

   - Prohibit ec_sys module parameter write_support from being used when
     the system is locked down (Hans de Goede).

   - Make the ACPI processor thermal driver use cpufreq_cpu_get() to
     check for presence of cpufreq policy (Manfred Spraul).

   - Avoid unnecessary CPU cache flushing in the ACPI processor idle
     driver (Kirill A. Shutemov).

   - Replace kernel.h with the necessary inclusions in the ACPI
     processor driver (Andy Shevchenko).

   - Use swap() instead of open coding it in the ACPI processor idle
     driver (Guo Zhengkui).

   - Fix the handling of defective LPAT in the ACPI xpower PMIC driver
     and clean up some definitions of PMIC data structures (Hans de
     Goede).

   - Fix outdated comment in the ACPI DPTF driver (Sumeet Pawnikar).

   - Add AEST to the list of known ACPI table signatures (Shuuichirou
     Ishii).

   - Make ACPI NUMA code take hotpluggable memblocks into account when
     CONFIG_MEMORY_HOTPLUG is not set (Vitaly Kuznetsov).

   - Use default_groups in kobj_type in the ACPI sysfs code (Greg
     Kroah-Hartman).

   - Rearrange _CPC structure documentation (Andy Shevchenko).

   - Drop an always true check from the ACPI thermal driver (Adam
     Borowski).

   - Add new "not charging" quirk for Lenovo ThinkPads to the ACPI
     battery driver (Thomas Weißschuh)"

* tag 'acpi-5.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (64 commits)
  ACPI: PCC: Implement OperationRegion handler for the PCC Type 3 subtype
  ACPI / x86: Skip AC and battery devices on x86 Android tablets with broken DSDTs
  ACPI / x86: Introduce an acpi_quirk_skip_acpi_ac_and_battery() helper
  ACPI: processor: thermal: avoid cpufreq_get_policy()
  serdev: Do not instantiate serdevs on boards with known bogus DSDT entries
  i2c: acpi: Do not instantiate I2C-clients on boards with known bogus DSDT entries
  ACPI / x86: Add acpi_quirk_skip_[i2c_client|serdev]_enumeration() helpers
  ACPI: scan: Create platform device for BCM4752 and LNV4752 ACPI nodes
  PCI/ACPI: Fix acpi_pci_osc_control_set() kernel-doc comment
  ACPI: battery: Add the ThinkPad "Not Charging" quirk
  ACPI: sysfs: use default_groups in kobj_type
  ACPICA: Update version to 20211217
  ACPICA: iASL/NHLT table: "Specific Data" field support
  ACPICA: iASL: Add suppport for AGDI table
  ACPICA: iASL: Add TDEL table to both compiler/disassembler
  ACPICA: Fixed a couple of warnings under MSVC
  ACPICA: Change a return_ACPI_STATUS (AE_BAD_PARAMETER)
  ACPICA: Hardware: Do not flush CPU cache when entering S4 and S5
  ACPICA: Add support for PCC Opregion special context data
  ACPICA: Fix wrong interpretation of PCC address
  ...

Commit 2c865a8a ("netfilter: nf_tables: add rule blob layout") never
initialized the new 'data_size' variable.

I'm not sure how it ever worked, but it might have worked almost by
accident - gcc seems to occasionally miss these kinds of 'variable used
uninitialized' situations, but I've seen it do so because it ended up
zero-initializing them due to some other simplification.

But clang is very unhappy about it all, and correctly reports

    net/netfilter/nf_tables_api.c:8278:4: error: variable 'data_size' is uninitialized when used here [-Werror,-Wuninitialized]
                            data_size += sizeof(*prule) + rule->dlen;
                            ^~~~~~~~~
    net/netfilter/nf_tables_api.c:8263:30: note: initialize the variable 'data_size' to silence this warning
            unsigned int size, data_size;
                                        ^
                                         = 0
    1 error generated.

and this fix just initializes 'data_size' to zero before the loop.

Fixes: 2c865a8a

 ("netfilter: nf_tables: add rule blob layout")
Cc: Pablo Neira Ayuso <pablo@netfilter.org>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: David Miller <davem@davemloft.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull networking updates from Jakub Kicinski:
 "Core
  ----

   - Defer freeing TCP skbs to the BH handler, whenever possible, or at
     least perform the freeing outside of the socket lock section to
     decrease cross-CPU allocator work and improve latency.

   - Add netdevice refcount tracking to locate sources of netdevice and
     net namespace refcount leaks.

   - Make Tx watchdog less intrusive - avoid pausing Tx and restarting
     all queues from a single CPU removing latency spikes.

   - Various small optimizations throughout the stack from Eric Dumazet.

   - Make netdev->dev_addr[] constant, force modifications to go via
     appropriate helpers to allow us to keep addresses in ordered data
     structures.

   - Replace unix_table_lock with per-hash locks, improving performance
     of bind() calls.

   - Extend skb drop tracepoint with a drop reason.

   - Allow SO_MARK and SO_PRIORITY setsockopt under CAP_NET_RAW.

  BPF
  ---

   - New helpers:
      - bpf_find_vma(), find and inspect VMAs for profiling use cases
      - bpf_loop(), runtime-bounded loop helper trading some execution
        time for much faster (if at all converging) verification
      - bpf_strncmp(), improve performance, avoid compiler flakiness
      - bpf_get_func_arg(), bpf_get_func_ret(), bpf_get_func_arg_cnt()
        for tracing programs, all inlined by the verifier

   - Support BPF relocations (CO-RE) in the kernel loader.

   - Further the support for BTF_TYPE_TAG annotations.

   - Allow access to local storage in sleepable helpers.

   - Convert verifier argument types to a composable form with different
     attributes which can be shared across types (ro, maybe-null).

   - Prepare libbpf for upcoming v1.0 release by cleaning up APIs,
     creating new, extensible ones where missing and deprecating those
     to be removed.

  Protocols
  ---------

   - WiFi (mac80211/cfg80211):
      - notify user space about long "come back in N" AP responses,
        allow it to react to such temporary rejections
      - allow non-standard VHT MCS 10/11 rates
      - use coarse time in airtime fairness code to save CPU cycles

   - Bluetooth:
      - rework of HCI command execution serialization to use a common
        queue and work struct, and improve handling errors reported in
        the middle of a batch of commands
      - rework HCI event handling to use skb_pull_data, avoiding packet
        parsing pitfalls
      - support AOSP Bluetooth Quality Report

   - SMC:
      - support net namespaces, following the RDMA model
      - improve connection establishment latency by pre-clearing buffers
      - introduce TCP ULP for automatic redirection to SMC

   - Multi-Path TCP:
      - support ioctls: SIOCINQ, OUTQ, and OUTQNSD
      - support socket options: IP_TOS, IP_FREEBIND, IP_TRANSPARENT,
        IPV6_FREEBIND, and IPV6_TRANSPARENT, TCP_CORK and TCP_NODELAY
      - support cmsgs: TCP_INQ
      - improvements in the data scheduler (assigning data to subflows)
      - support fastclose option (quick shutdown of the full MPTCP
        connection, similar to TCP RST in regular TCP)

   - MCTP (Management Component Transport) over serial, as defined by
     DMTF spec DSP0253 - "MCTP Serial Transport Binding".

  Driver API
  ----------

   - Support timestamping on bond interfaces in active/passive mode.

   - Introduce generic phylink link mode validation for drivers which
     don't have any quirks and where MAC capability bits fully express
     what's supported. Allow PCS layer to participate in the validation.
     Convert a number of drivers.

   - Add support to set/get size of buffers on the Rx rings and size of
     the tx copybreak buffer via ethtool.

   - Support offloading TC actions as first-class citizens rather than
     only as attributes of filters, improve sharing and device resource
     utilization.

   - WiFi (mac80211/cfg80211):
      - support forwarding offload (ndo_fill_forward_path)
      - support for background radar detection hardware
      - SA Query Procedures offload on the AP side

  New hardware / drivers
  ----------------------

   - tsnep - FPGA based TSN endpoint Ethernet MAC used in PLCs with
     real-time requirements for isochronous communication with protocols
     like OPC UA Pub/Sub.

   - Qualcomm BAM-DMUX WWAN - driver for data channels of modems
     integrated into many older Qualcomm SoCs, e.g. MSM8916 or MSM8974
     (qcom_bam_dmux).

   - Microchip LAN966x multi-port Gigabit AVB/TSN Ethernet Switch driver
     with support for bridging, VLANs and multicast forwarding
     (lan966x).

   - iwlmei driver for co-operating between Intel's WiFi driver and
     Intel's Active Management Technology (AMT) devices.

   - mse102x - Vertexcom MSE102x Homeplug GreenPHY chips

   - Bluetooth:
      - MediaTek MT7921 SDIO devices
      - Foxconn MT7922A
      - Realtek RTL8852AE

  Drivers
  -------

   - Significantly improve performance in the datapaths of: lan78xx,
     ax88179_178a, lantiq_xrx200, bnxt.

   - Intel Ethernet NICs:
      - igb: support PTP/time PEROUT and EXTTS SDP functions on
        82580/i354/i350 adapters
      - ixgbevf: new PF -> VF mailbox API which avoids the risk of
        mailbox corruption with ESXi
      - iavf: support configuration of VLAN features of finer
        granularity, stacked tags and filtering
      - ice: PTP support for new E822 devices with sub-ns precision
      - ice: support firmware activation without reboot

   - Mellanox Ethernet NICs (mlx5):
      - expose control over IRQ coalescing mode (CQE vs EQE) via ethtool
      - support TC forwarding when tunnel encap and decap happen between
        two ports of the same NIC
      - dynamically size and allow disabling various features to save
        resources for running in embedded / SmartNIC scenarios

   - Broadcom Ethernet NICs (bnxt):
      - use page frag allocator to improve Rx performance
      - expose control over IRQ coalescing mode (CQE vs EQE) via ethtool

   - Other Ethernet NICs:
      - amd-xgbe: add Ryzen 6000 (Yellow Carp) Ethernet support

   - Microsoft cloud/virtual NIC (mana):
      - add XDP support (PASS, DROP, TX)

   - Mellanox Ethernet switches (mlxsw):
      - initial support for Spectrum-4 ASICs
      - VxLAN with IPv6 underlay

   - Marvell Ethernet switches (prestera):
      - support flower flow templates
      - add basic IP forwarding support

   - NXP embedded Ethernet switches (ocelot & felix):
      - support Per-Stream Filtering and Policing (PSFP)
      - enable cut-through forwarding between ports by default
      - support FDMA to improve packet Rx/Tx to CPU

   - Other embedded switches:
      - hellcreek: improve trapping management (STP and PTP) packets
      - qca8k: support link aggregation and port mirroring

   - Qualcomm 802.11ax WiFi (ath11k):
      - qca6390, wcn6855: enable 802.11 power save mode in station mode
      - BSS color change support
      - WCN6855 hw2.1 support
      - 11d scan offload support
      - scan MAC address randomization support
      - full monitor mode, only supported on QCN9074
      - qca6390/wcn6855: report signal and tx bitrate
      - qca6390: rfkill support
      - qca6390/wcn6855: regdb.bin support

   - Intel WiFi (iwlwifi):
      - support SAR GEO Offset Mapping (SGOM) and Time-Aware-SAR (TAS)
        in cooperation with the BIOS
      - support for Optimized Connectivity Experience (OCE) scan
      - support firmware API version 68
      - lots of preparatory work for the upcoming Bz device family

   - MediaTek WiFi (mt76):
      - Specific Absorption Rate (SAR) support
      - mt7921: 160 MHz channel support

   - RealTek WiFi (rtw88):
      - Specific Absorption Rate (SAR) support
      - scan offload

   - Other WiFi NICs
      - ath10k: support fetching (pre-)calibration data from nvmem
      - brcmfmac: configure keep-alive packet on suspend
      - wcn36xx: beacon filter support"

* tag '5.17-net-next' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2048 commits)
  tcp: tcp_send_challenge_ack delete useless param `skb`
  net/qla3xxx: Remove useless DMA-32 fallback configuration
  rocker: Remove useless DMA-32 fallback configuration
  hinic: Remove useless DMA-32 fallback configuration
  lan743x: Remove useless DMA-32 fallback configuration
  net: enetc: Remove useless DMA-32 fallback configuration
  cxgb4vf: Remove useless DMA-32 fallback configuration
  cxgb4: Remove useless DMA-32 fallback configuration
  cxgb3: Remove useless DMA-32 fallback configuration
  bnx2x: Remove useless DMA-32 fallback configuration
  et131x: Remove useless DMA-32 fallback configuration
  be2net: Remove useless DMA-32 fallback configuration
  vmxnet3: Remove useless DMA-32 fallback configuration
  bna: Simplify DMA setting
  net: alteon: Simplify DMA setting
  myri10ge: Simplify DMA setting
  qlcnic: Simplify DMA setting
  net: allwinner: Fix print format
  page_pool: remove spinlock in page_pool_refill_alloc_cache()
  amt: fix wrong return type of amt_send_membership_update()
  ...

Pull media updates from Mauro Carvalho Chehab:

 - New sensor driver: ov5693

 - A new driver for STM32 Chrom-ART Accelerator

 - Added V4L2 core helper functions for VP9 codec

 - Hantro driver has gained support for VP9 codecs

 - Added support for Maxim MAX96712 Quad GMSL2 Deserializer

 - The staging atomisp driver has gained lots of improvements, fixes and
   cleanups. It now works with userptr

 - Lots of random driver improvements as usual

* tag 'media/v5.17-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (397 commits)
  media: ipu3-cio2: Add support for instantiating i2c-clients for VCMs
  media: ipu3-cio2: Call cio2_bridge_init() before anything else
  media: ipu3-cio2: Defer probing until the PMIC is fully setup
  media: hantro: Add support for Allwinner H6
  media: dt-bindings: allwinner: document H6 Hantro G2 binding
  media: hantro: Convert imx8m_vpu_g2_irq to helper
  media: hantro: move postproc enablement for old cores
  media: hantro: vp9: add support for legacy register set
  media: hantro: vp9: use double buffering if needed
  media: hantro: add support for reset lines
  media: hantro: Fix probe func error path
  media: i2c: hi846: use pm_runtime_force_suspend/resume for system suspend
  media: i2c: hi846: check return value of regulator_bulk_disable()
  media: hi556: Support device probe in non-zero ACPI D state
  media: ov5675: Support device probe in non-zero ACPI D state
  media: imx208: Support device probe in non-zero ACPI D state
  media: ov2740: support device probe in non-zero ACPI D state
  media: ov5670: Support device probe in non-zero ACPI D state
  media: ov8856: support device probe in non-zero ACPI D state
  media: ov8865: Disable only enabled regulators on error path
  ...

This reverts commit a896f870

.

It causes odd flickering on my Radeon RX580 (PCI ID 1002:67df rev e7,
subsystem ID 1da2:e353).

Bisected right to this commit, and reverting it fixes things.

Link: https://lore.kernel.org/all/CAHk-=wg9hDde_L3bK9tAfdJ4N=TJJ+SjO3ZDONqH5=bVoy_Mzg@mail.gmail.com/
Cc: Alex Deucher <alexdeucher@gmail.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Dave Airlie <airlied@gmail.com>
Cc: Christian Koenig <christian.koenig@amd.com>
Cc: Jun Lei <Jun.Lei@amd.com>
Cc: Mustapha Ghaddar <mustapha.ghaddar@amd.com>
Cc: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Cc: meenakshikumar somasundaram <meenakshikumar.somasundaram@amd.com>
Cc: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull drm updates from Dave Airlie:
 "Highlights are support for privacy screens found in new laptops, a
  bunch of nomodeset refactoring, and i915 enables ADL-P systems by
  default, while starting to add RPL-S support.

  vmwgfx adds GEM and support for OpenGL 4.3 features in userspace.

  Lots of internal refactorings around dma reservations, and lots of
  driver refactoring as well.

  Summary:

  core:
   - add privacy screen support
   - move nomodeset option into drm subsystem
   - clean up nomodeset handling in drivers
   - make drm_irq.c legacy
   - fix stack_depot name conflicts
   - remove DMA_BUF_SET_NAME ioctl restrictions
   - sysfs: send hotplug event
   - replace several DRM_* logging macros with drm_*
   - move hashtable to legacy code
   - add error return from gem_create_object
   - cma-helper: improve interfaces, drop CONFIG_DRM_KMS_CMA_HELPER
   - kernel.h related include cleanups
   - support XRGB2101010 source buffers

  ttm:
   - don't include drm hashtable
   - stop pruning fences after wait
   - documentation updates

  dma-buf:
   - add dma_resv selftest
   - add debugfs helpers
   - remove dma_resv_get_excl_unlocked
   - documentation
   - make fences mandatory in dma_resv_add_excl_fence

  dp:
   - add link training delay helpers

  gem:
   - link shmem/cma helpers into separate modules
   - use dma_resv iteratior
   - import dma-buf namespace into gem helper modules

  scheduler:
   - fence grab fix
   - lockdep fixes

  bridge:
   - switch to managed MIPI DSI helpers
   - register and attach during probe fixes
   - convert to YAML in several places.

  panel:
   - add bunch of new panesl

  simpledrm:
   - support FB_DAMAGE_CLIPS
   - support virtual screen sizes
   - add Apple M1 support

  amdgpu:
   - enable seamless boot for DCN 3.01
   - runtime PM fixes
   - use drm_kms_helper_connector_hotplug_event
   - get all fences at once
   - use generic drm fb helpers
   - PSR/DPCD/LTTPR/DSC/PM/RAS/OLED/SRIOV fixes
   - add smart trace buffer (STB) for supported GPUs
   - display debugfs entries
   - new SMU debug option
   - Documentation update

  amdkfd:
   - IP discovery enumeration refactor
   - interface between driver fixes
   - SVM fixes
   - kfd uapi header to define some sysfs bitfields.

  i915:
   - support VESA panel backlights
   - enable ADL-P by default
   - add eDP privacy screen support
   - add Raptor Lake S (RPL-S) support
   - DG2 page table support
   - lots of GuC/HuC fw refactoring
   - refactored i915->gt interfaces
   - CD clock squashing support
   - enable 10-bit gamma support
   - update ADL-P DMC fw to v2.14
   - enable runtime PM autosuspend by default
   - ADL-P DSI support
   - per-lane DP drive settings for ICL+
   - add support for pipe C/D DMC firmware
   - Atomic gamma LUT updates
   - remove CCS FB stride restrictions on ADL-P
   - VRR platform support for display 11
   - add support for display audio codec keepalive
   - lots of display refactoring
   - fix runtime PM handling during PXP suspend
   - improved eviction performance with async TTM moves
   - async VMA unbinding improvements
   - VMA locking refactoring
   - improved error capture robustness
   - use per device iommu checks
   - drop bits stealing from i915_sw_fence function ptr
   - remove dma_resv_prune
   - add IC cache invalidation on DG2

  nouveau:
   - crc fixes
   - validate LUTs in atomic check
   - set HDMI AVI RGB quant to full

  tegra:
   - buffer objects reworks for dma-buf compat
   - NVDEC driver uAPI support
   - power management improvements

  etnaviv:
   - IOMMU enabled system support
   - fix > 4GB command buffer mapping
   - close a DoS vector
   - fix spurious GPU resets

  ast:
   - fix i2c initialization

  rcar-du:
   - DSI output support

  exynos:
   - replace legacy gpio interface
   - implement generic GEM object mmap

  msm:
   - dpu plane state cleanup in prep for multirect
   - dpu debugfs cleanups
   - dp support for sc7280
   - a506 support
   - removal of struct_mutex
   - remove old eDP sub-driver

  anx7625:
   - support MIPI DSI input
   - support HDMI audio
   - fix reading EDID

  lvds:
   - fix bridge DT bindings

  megachips:
   - probe both bridges before registering

  dw-hdmi:
   - allow interlace on bridge

  ps8640:
   - enable runtime PM
   - support aux-bus

  tx358768:
   - enable reference clock
   - add pulse mode support

  ti-sn65dsi86:
   - use regmap bulk write
   - add PWM support

  etnaviv:
   - get all fences at once

  gma500:
   - gem object cleanups

  kmb:
   - enable fb console

  radeon:
   - use dma_resv_wait_timeout

  rockchip:
   - add DSP hold timeout
   - suspend/resume fixes
   - PLL clock fixes
   - implement mmap in GEM object functions
   - use generic fbdev emulation

  sun4i:
   - use CMA helpers without vmap support

  vc4:
   - fix HDMI-CEC hang with display is off
   - power on HDMI controller while disabling
   - support 4K@60Hz modes
   - support 10-bit YUV 4:2:0 output

  vmwgfx:
   - fix leak on probe errors
   - fail probing on broken hosts
   - new placement for MOB page tables
   - hide internal BOs from userspace
   - implement GEM support
   - implement GL 4.3 support

  virtio:
   - overflow fixes

  xen:
   - implement mmap as GEM object function

  omapdrm:
   - fix scatterlist export
   - support virtual planes

  mediatek:
   - MT8192 support
   - CMDQ refinement"

* tag 'drm-next-2022-01-07' of git://anongit.freedesktop.org/drm/drm: (1241 commits)
  drm/amdgpu: no DC support for headless chips
  drm/amd/display: fix dereference before NULL check
  drm/amdgpu: always reset the asic in suspend (v2)
  drm/amdgpu: put SMU into proper state on runpm suspending for BOCO capable platform
  drm/amd/display: Fix the uninitialized variable in enable_stream_features()
  drm/amdgpu: fix runpm documentation
  amdgpu/pm: Make sysfs pm attributes as read-only for VFs
  drm/amdgpu: save error count in RAS poison handler
  drm/amdgpu: drop redundant semicolon
  drm/amd/display: get and restore link res map
  drm/amd/display: support dynamic HPO DP link encoder allocation
  drm/amd/display: access hpo dp link encoder only through link resource
  drm/amd/display: populate link res in both detection and validation
  drm/amd/display: define link res and make it accessible to all link interfaces
  drm/amd/display: 3.2.167
  drm/amd/display: [FW Promotion] Release 0.0.98
  drm/amd/display: Undo ODM combine
  drm/amd/display: Add reg defs for DCN303
  drm/amd/display: Changed pipe split policy to allow for multi-display pipe split
  drm/amd/display: Set optimize_pwr_state for DCN31
  ...

Merge tag 'linux-kselftest-kunit-5.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest

Pull KUnit updates from Shuah Khan:
 "This consists of several fixes and enhancements. A few highlights:

   - Option --kconfig_add option allows easily tweaking kunitconfigs

   - make build subcommand can reconfigure if needed

   - doesn't error on tests without test plans

   - doesn't crash if no parameters are generated

   - defaults --jobs to # of cups

   - reports test parameter results as (K)TAP subtests"

* tag 'linux-kselftest-kunit-5.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
  kunit: tool: Default --jobs to number of CPUs
  kunit: tool: fix newly introduced typechecker errors
  kunit: tool: make `build` subcommand also reconfigure if needed
  kunit: tool: delete kunit_parser.TestResult type
  kunit: tool: use dataclass instead of collections.namedtuple
  kunit: tool: suggest using decode_stacktrace.sh on kernel crash
  kunit: tool: reconfigure when the used kunitconfig changes
  kunit: tool: revamp message for invalid kunitconfig
  kunit: tool: add --kconfig_add to allow easily tweaking kunitconfigs
  kunit: tool: move Kconfig read_from_file/parse_from_string to package-level
  kunit: tool: print parsed test results fully incrementally
  kunit: Report test parameter results as (K)TAP subtests
  kunit: Don't crash if no parameters are generated
  kunit: tool: Report an error if any test has no subtests
  kunit: tool: Do not error on tests without test plans
  kunit: add run_checks.py script to validate kunit changes
  Documentation: kunit: remove claims that kunit is a mocking framework
  kunit: tool: fix --json output for skipped tests

Merge tag 'linux-kselftest-next-5.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest

Pull Kselftest update from Shuah Khan:
 "Fixes to build errors, false negatives, and several code cleanups,
  including the ARRAY_SIZE cleanup that removes 25+ duplicates
  ARRAY_SIZE defines from individual tests"

* tag 'linux-kselftest-next-5.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
  selftests/vm: remove ARRAY_SIZE define from individual tests
  selftests/timens: remove ARRAY_SIZE define from individual tests
  selftests/sparc64: remove ARRAY_SIZE define from adi-test
  selftests/seccomp: remove ARRAY_SIZE define from seccomp_benchmark
  selftests/rseq: remove ARRAY_SIZE define from individual tests
  selftests/net: remove ARRAY_SIZE define from individual tests
  selftests/landlock: remove ARRAY_SIZE define from common.h
  selftests/ir: remove ARRAY_SIZE define from ir_loopback.c
  selftests/core: remove ARRAY_SIZE define from close_range_test.c
  selftests/cgroup: remove ARRAY_SIZE define from cgroup_util.h
  selftests/arm64: remove ARRAY_SIZE define from vec-syscfg.c
  tools: fix ARRAY_SIZE defines in tools and selftests hdrs
  selftests: cgroup: build error multiple outpt files
  selftests/move_mount_set_group remove unneeded conversion to bool
  selftests/mount: remove unneeded conversion to bool
  selftests: harness: avoid false negatives if test has no ASSERTs
  selftests/ftrace: make kprobe profile testcase description unique
  selftests: clone3: clone3: add case CLONE3_ARGS_NO_TEST
  selftests: timers: Remove unneeded semicolon
  kselftests: timers:Remove unneeded semicolon

Pull slab updates from Vlastimil Babka:

 - Separate struct slab from struct page - an offshot of the page folio
   work.

   Struct page fields used by slab allocators are moved from struct page
   to a new struct slab, that uses the same physical storage. Similar to
   struct folio, it always is a head page. This brings better type
   safety, separation of large kmalloc allocations from true slabs, and
   cleanup of related objcg code.

 - A SLAB_MERGE_DEFAULT config optimization.

* tag 'slab-for-5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/vbabka/slab: (33 commits)
  mm/slob: Remove unnecessary page_mapcount_reset() function call
  bootmem: Use page->index instead of page->freelist
  zsmalloc: Stop using slab fields in struct page
  mm/slub: Define struct slab fields for CONFIG_SLUB_CPU_PARTIAL only when enabled
  mm/slub: Simplify struct slab slabs field definition
  mm/sl*b: Differentiate struct slab fields by sl*b implementations
  mm/kfence: Convert kfence_guarded_alloc() to struct slab
  mm/kasan: Convert to struct folio and struct slab
  mm/slob: Convert SLOB to use struct slab and struct folio
  mm/memcg: Convert slab objcgs from struct page to struct slab
  mm: Convert struct page to struct slab in functions used by other subsystems
  mm/slab: Finish struct page to struct slab conversion
  mm/slab: Convert most struct page to struct slab by spatch
  mm/slab: Convert kmem_getpages() and kmem_freepages() to struct slab
  mm/slub: Finish struct page to struct slab conversion
  mm/slub: Convert most struct page to struct slab by spatch
  mm/slub: Convert pfmemalloc_match() to take a struct slab
  mm/slub: Convert __free_slab() to use struct slab
  mm/slub: Convert alloc_slab_page() to return a struct slab
  mm/slub: Convert print_page_info() to print_slab_info()
  ...

Pull random number generator updates from Jason Donenfeld:
 "These a bit more numerous than usual for the RNG, due to folks
  resubmitting patches that had been pending prior and generally renewed
  interest.

  There are a few categories of patches in here:

   1) Dominik Brodowski and I traded a series back and forth for a some
      weeks that fixed numerous issues related to seeds being provided
      at extremely early boot by the firmware, before other parts of the
      kernel or of the RNG have been initialized, both fixing some
      crashes and addressing correctness around early boot randomness.
      One of these is marked for stable.

   2) I replaced the RNG's usage of SHA-1 with BLAKE2s in the entropy
      extractor, and made the construction a bit safer and more
      standard. This was sort of a long overdue low hanging fruit, as we
      were supposed to have phased out SHA-1 usage quite some time ago
      (even if all we needed here was non-invertibility). Along the way
      it also made extraction 131% faster. This required a bit of
      Kconfig and symbol plumbing to make things work well with the
      crypto libraries, which is one of the reasons why I'm sending you
      this pull early in the cycle.

   3) I got rid of a truly superfluous call to RDRAND in the hot path,
      which resulted in a whopping 370% increase in performance.

   4) Sebastian Andrzej Siewior sent some patches regarding PREEMPT_RT,
      the full series of which wasn't ready yet, but the first two
      preparatory cleanups were good on their own. One of them touches
      files in kernel/irq/, which is the other reason why I'm sending
      you this pull early in the cycle.

   5) Other assorted correctness fixes from Eric Biggers, Jann Horn,
      Mark Brown, Dominik Brodowski, and myself"

* 'random-5.17-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/crng/random:
  random: don't reset crng_init_cnt on urandom_read()
  random: avoid superfluous call to RDRAND in CRNG extraction
  random: early initialization of ChaCha constants
  random: use IS_ENABLED(CONFIG_NUMA) instead of ifdefs
  random: harmonize "crng init done" messages
  random: mix bootloader randomness into pool
  random: do not throw away excess input to crng_fast_load
  random: do not re-init if crng_reseed completes before primary init
  random: fix crash on multiple early calls to add_bootloader_randomness()
  random: do not sign extend bytes for rotation when mixing
  random: use BLAKE2s instead of SHA1 in extraction
  lib/crypto: blake2s: include as built-in
  random: fix data race on crng init time
  random: fix data race on crng_node_pool
  irq: remove unused flags argument from __handle_irq_event_percpu()
  random: remove unused irq_flags argument from add_interrupt_randomness()
  random: document add_hwgenerator_randomness() with other input functions
  MAINTAINERS: add git tree for random.c

Pull seccomp updates from Kees Cook:
 "The core seccomp code hasn't changed for this cycle, but the selftests
  were improved while helping to debug the recent signal handling
  refactoring work Eric did.

  Summary:

   - Improve seccomp selftests in support of signal handler refactoring
     (Kees Cook)"

* tag 'seccomp-v5.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
  selftests/seccomp: Report event mismatches more clearly
  selftests/seccomp: Stop USER_NOTIF test if kcmp() fails

Pull pstore update from Kees Cook:

 - Add boot param for early ftrace recording in pstore (Uwe
   Kleine-König)

* tag 'pstore-v5.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
  pstore/ftrace: Allow immediate recording