- Dec 29, 2021
-
-
Ulf Hansson authored
commit 66c915d0 upstream. It's seems prone to problems by allowing card detect and its corresponding mmc_rescan() work to run, during platform shutdown. For example, we may end up turning off the power while initializing a card, which potentially could damage it. To avoid this scenario, let's add ->shutdown_pre() callback for the mmc host class device and then turn of the card detect from there. Reported-by:
Al Cooper <alcooperx@gmail.com> Suggested-by:
Adrian Hunter <adrian.hunter@intel.com> Signed-off-by:
Ulf Hansson <ulf.hansson@linaro.org> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20211203141555.105351-1-ulf.hansson@linaro.org Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Martin Blumenstingl authored
commit f89b548c upstream. The vendor driver implements special handling for multi-block SD_IO_RW_EXTENDED (and SD_IO_RW_DIRECT) commands which have data attached to them. It sets the MANUAL_STOP bit in the MESON_SDHC_MISC register for these commands. In all other cases this bit is cleared. Here we omit SD_IO_RW_DIRECT since that command never has any data attached to it. This fixes SDIO wifi using the brcmfmac driver which reported the following error without this change on a Netxeon S82 board using a Meson8 (S802) SoC: brcmf_fw_alloc_request: using brcm/brcmfmac43362-sdio for chip BCM43362/1 brcmf_sdiod_ramrw: membytes transfer failed brcmf_sdio_download_code_file: error -110 on writing 219557 membytes at 0x00000000 brcmf_sdio_download_firmware: dongle image file download failed And with this change: brcmf_fw_alloc_request: using brcm/brcmfmac43362-sdio for chip BCM43362/1 brcmf_c_process_clm_blob: no clm_blob available (err=-2), device may have limited channels available brcmf_c_preinit_dcmds: Firmware: BCM43362/1 wl0: Apr 22 2013 14:50:00 version 5.90.195.89.6 FWID 01-b30a427d Fixes: e4bf1b09 ("mmc: host: meson-mx-sdhc: new driver for the Amlogic Meson SDHC host") Signed-off-by:
Martin Blumenstingl <martin.blumenstingl@googlemail.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20211219153442.463863-2-martin.blumenstingl@googlemail.com Signed-off-by:
Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Prathamesh Shete authored
commit 4fc7261d upstream. When CMD13 is sent after switching to HS400ES mode, the bus is operating at either MMC_HIGH_26_MAX_DTR or MMC_HIGH_52_MAX_DTR. To meet Tegra SDHCI requirement at HS400ES mode, force SDHCI interface clock to MMC_HS200_MAX_DTR (200 MHz) so that host controller CAR clock and the interface clock are rate matched. Signed-off-by:
Prathamesh Shete <pshete@nvidia.com> Acked-by:
Adrian Hunter <adrian.hunter@intel.com> Fixes: dfc9700c ("mmc: tegra: Implement HS400 enhanced strobe") Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20211214113653.4631-1-pshete@nvidia.com Signed-off-by:
Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Noralf Trønnes authored
commit 9a5875f1 upstream. When replugging the device the following message shows up: gpio gpiochip2: (dln2): detected irqchip that is shared with multiple gpiochips: please fix the driver. This also has the effect that interrupts won't work. The same problem would also show up if multiple devices where plugged in. Fix this by allocating the irq_chip data structure per instance like other drivers do. I don't know when this problem appeared, but it is present in 5.10. Cc: <stable@vger.kernel.org> # 5.10+ Cc: Daniel Baluta <daniel.baluta@gmail.com> Signed-off-by:
Noralf Trønnes <noralf@tronnes.org> Signed-off-by:
Bartosz Golaszewski <brgl@bgdev.pl> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Fabien Dessenne authored
commit b67210cc upstream. Consider the GPIO controller offset (from "gpio-ranges") to compute the maximum GPIO line number. This fixes an issue where gpio-ranges uses a non-null offset. e.g.: gpio-ranges = <&pinctrl 6 86 10> In that case the last valid GPIO line is not 9 but 15 (6 + 10 - 1) Cc: stable@vger.kernel.org Fixes: 67e2996f ("pinctrl: stm32: fix the reported number of GPIO lines per bank") Reported-by:
Christoph Fritz <chf.fritz@googlemail.com> Signed-off-by:
Fabien Dessenne <fabien.dessenne@foss.st.com> Link: https://lore.kernel.org/r/20211215095808.621716-1-fabien.dessenne@foss.st.com Signed-off-by:
Linus Walleij <linus.walleij@linaro.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Sean Christopherson authored
commit fdba608f upstream. Drop a check that guards triggering a posted interrupt on the currently running vCPU, and more importantly guards waking the target vCPU if triggering a posted interrupt fails because the vCPU isn't IN_GUEST_MODE. If a vIRQ is delivered from asynchronous context, the target vCPU can be the currently running vCPU and can also be blocking, in which case skipping kvm_vcpu_wake_up() is effectively dropping what is supposed to be a wake event for the vCPU. The "do nothing" logic when "vcpu == running_vcpu" mostly works only because the majority of calls to ->deliver_posted_interrupt(), especially when using posted interrupts, come from synchronous KVM context. But if a device is exposed to the guest using vfio-pci passthrough, the VFIO IRQ and vCPU are bound to the same pCPU, and the IRQ is _not_ configured to use posted interrupts, wake events from the device will be delivered to KVM from IRQ context, e.g. vfio_msihandler() | |-> eventfd_signal() | |-> ... | |-> irqfd_wakeup() | |->kvm_arch_set_irq_inatomic() | |-> kvm_irq_delivery_to_apic_fast() | |-> kvm_apic_set_irq() This also aligns the non-nested and nested usage of triggering posted interrupts, and will allow for additional cleanups. Fixes: 379a3c8e ("KVM: VMX: Optimize posted-interrupt delivery for timer fastpath") Cc: stable@vger.kernel.org Reported-by:
Longpeng (Mike) <longpeng2@huawei.com> Signed-off-by:
Sean Christopherson <seanjc@google.com> Reviewed-by:
Maxim Levitsky <mlevitsk@redhat.com> Message-Id: <20211208015236.1616697-18-seanjc@google.com> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Sean Christopherson authored
commit a80dfc02 upstream. Revert a relatively recent change that set vmx->fail if the vCPU is in L2 and emulation_required is true, as that behavior is completely bogus. Setting vmx->fail and synthesizing a VM-Exit is contradictory and wrong: (a) it's impossible to have both a VM-Fail and VM-Exit (b) vmcs.EXIT_REASON is not modified on VM-Fail (c) emulation_required refers to guest state and guest state checks are always VM-Exits, not VM-Fails. For KVM specifically, emulation_required is handled before nested exits in __vmx_handle_exit(), thus setting vmx->fail has no immediate effect, i.e. KVM calls into handle_invalid_guest_state() and vmx->fail is ignored. Setting vmx->fail can ultimately result in a WARN in nested_vmx_vmexit() firing when tearing down the VM as KVM never expects vmx->fail to be set when L2 is active, KVM always reflects those errors into L1. ------------[ cut here ]------------ WARNING: CPU: 0 PID: 21158 at arch/x86/kvm/vmx/nested.c:4548 nested_vmx_vmexit+0x16bd/0x17e0 arch/x86/kvm/vmx/nested.c:4547 Modules linked in: CPU: 0 PID: 21158 Comm: syz-executor.1 Not tainted 5.16.0-rc3-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 RIP: 0010:nested_vmx_vmexit+0x16bd/0x17e0 arch/x86/kvm/vmx/nested.c:4547 Code: <0f> 0b e9 2e f8 ff ff e8 57 b3 5d 00 0f 0b e9 00 f1 ff ff 89 e9 80 Call Trace: vmx_leave_nested arch/x86/kvm/vmx/nested.c:6220 [inline] nested_vmx_free_vcpu+0x83/0xc0 arch/x86/kvm/vmx/nested.c:330 vmx_free_vcpu+0x11f/0x2a0 arch/x86/kvm/vmx/vmx.c:6799 kvm_arch_vcpu_destroy+0x6b/0x240 arch/x86/kvm/x86.c:10989 kvm_vcpu_destroy+0x29/0x90 arch/x86/kvm/../../../virt/kvm/kvm_main.c:441 kvm_free_vcpus arch/x86/kvm/x86.c:11426 [inline] kvm_arch_destroy_vm+0x3ef/0x6b0 arch/x86/kvm/x86.c:11545 kvm_destroy_vm arch/x86/kvm/../../../virt/kvm/kvm_main.c:1189 [inline] kvm_put_kvm+0x751/0xe40 arch/x86/kvm/../../../virt/kvm/kvm_main.c:1220 kvm_vcpu_release+0x53/0x60 arch/x86/kvm/../../../virt/kvm/kvm_main.c:3489 __fput+0x3fc/0x870 fs/file_table.c:280 task_work_run+0x146/0x1c0 kernel/task_work.c:164 exit_task_work include/linux/task_work.h:32 [inline] do_exit+0x705/0x24f0 kernel/exit.c:832 do_group_exit+0x168/0x2d0 kernel/exit.c:929 get_signal+0x1740/0x2120 kernel/signal.c:2852 arch_do_signal_or_restart+0x9c/0x730 arch/x86/kernel/signal.c:868 handle_signal_work kernel/entry/common.c:148 [inline] exit_to_user_mode_loop kernel/entry/common.c:172 [inline] exit_to_user_mode_prepare+0x191/0x220 kernel/entry/common.c:207 __syscall_exit_to_user_mode_work kernel/entry/common.c:289 [inline] syscall_exit_to_user_mode+0x2e/0x70 kernel/entry/common.c:300 do_syscall_64+0x53/0xd0 arch/x86/entry/common.c:86 entry_SYSCALL_64_after_hwframe+0x44/0xae Fixes: c8607e4a ("KVM: x86: nVMX: don't fail nested VM entry on invalid guest state if !from_vmentry") Reported-by:
<syzbot+f1d2136db9c80d4733e8@syzkaller.appspotmail.com> Reviewed-by:
Maxim Levitsky <mlevitsk@redhat.com> Cc: stable@vger.kernel.org Signed-off-by:
Sean Christopherson <seanjc@google.com> Message-Id: <20211207193006.120997-2-seanjc@google.com> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Sean Christopherson authored
commit cd0e615c upstream. Synthesize a triple fault if L2 guest state is invalid at the time of VM-Enter, which can happen if L1 modifies SMRAM or if userspace stuffs guest state via ioctls(), e.g. KVM_SET_SREGS. KVM should never emulate invalid guest state, since from L1's perspective, it's architecturally impossible for L2 to have invalid state while L2 is running in hardware. E.g. attempts to set CR0 or CR4 to unsupported values will either VM-Exit or #GP. Modifying vCPU state via RSM+SMRAM and ioctl() are the only paths that can trigger this scenario, as nested VM-Enter correctly rejects any attempt to enter L2 with invalid state. RSM is a straightforward case as (a) KVM follows AMD's SMRAM layout and behavior, and (b) Intel's SDM states that loading reserved CR0/CR4 bits via RSM results in shutdown, i.e. there is precedent for KVM's behavior. Following AMD's SMRAM layout is important as AMD's layout saves/restores the descriptor cache information, including CS.RPL and SS.RPL, and also defines all the fields relevant to invalid guest state as read-only, i.e. so long as the vCPU had valid state before the SMI, which is guaranteed for L2, RSM will generate valid state unless SMRAM was modified. Intel's layout saves/restores only the selector, which means that scenarios where the selector and cached RPL don't match, e.g. conforming code segments, would yield invalid guest state. Intel CPUs fudge around this issued by stuffing SS.RPL and CS.RPL on RSM. Per Intel's SDM on the "Default Treatment of RSM", paraphrasing for brevity: IF internal storage indicates that the [CPU was post-VMXON] THEN enter VMX operation (root or non-root); restore VMX-critical state as defined in Section 34.14.1; set to their fixed values any bits in CR0 and CR4 whose values must be fixed in VMX operation [unless coming from an unrestricted guest]; IF RFLAGS.VM = 0 AND (in VMX root operation OR the “unrestricted guest” VM-execution control is 0) THEN CS.RPL := SS.DPL; SS.RPL := SS.DPL; FI; restore current VMCS pointer; FI; Note that Intel CPUs also overwrite the fixed CR0/CR4 bits, whereas KVM will sythesize TRIPLE_FAULT in this scenario. KVM's behavior is allowed as both Intel and AMD define CR0/CR4 SMRAM fields as read-only, i.e. the only way for CR0 and/or CR4 to have illegal values is if they were modified by the L1 SMM handler, and Intel's SDM "SMRAM State Save Map" section states "modifying these registers will result in unpredictable behavior". KVM's ioctl() behavior is less straightforward. Because KVM allows ioctls() to be executed in any order, rejecting an ioctl() if it would result in invalid L2 guest state is not an option as KVM cannot know if a future ioctl() would resolve the invalid state, e.g. KVM_SET_SREGS, or drop the vCPU out of L2, e.g. KVM_SET_NESTED_STATE. Ideally, KVM would reject KVM_RUN if L2 contained invalid guest state, but that carries the risk of a false positive, e.g. if RSM loaded invalid guest state and KVM exited to userspace. Setting a flag/request to detect such a scenario is undesirable because (a) it's extremely unlikely to add value to KVM as a whole, and (b) KVM would need to consider ioctl() interactions with such a flag, e.g. if userspace migrated the vCPU while the flag were set. Cc: stable@vger.kernel.org Signed-off-by:
Sean Christopherson <seanjc@google.com> Message-Id: <20211207193006.120997-3-seanjc@google.com> Reviewed-by:
Maxim Levitsky <mlevitsk@redhat.com> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Sean Christopherson authored
commit 3a0f64de upstream. After dropping mmu_lock in the TDP MMU, restart the iterator during tdp_iter_next() and do not advance the iterator. Advancing the iterator results in skipping the top-level SPTE and all its children, which is fatal if any of the skipped SPTEs were not visited before yielding. When zapping all SPTEs, i.e. when min_level == root_level, restarting the iter and then invoking tdp_iter_next() is always fatal if the current gfn has as a valid SPTE, as advancing the iterator results in try_step_side() skipping the current gfn, which wasn't visited before yielding. Sprinkle WARNs on iter->yielded being true in various helpers that are often used in conjunction with yielding, and tag the helper with __must_check to reduce the probabily of improper usage. Failing to zap a top-level SPTE manifests in one of two ways. If a valid SPTE is skipped by both kvm_tdp_mmu_zap_all() and kvm_tdp_mmu_put_root(), the shadow page will be leaked and KVM will WARN accordingly. WARNING: CPU: 1 PID: 3509 at arch/x86/kvm/mmu/tdp_mmu.c:46 [kvm] RIP: 0010:kvm_mmu_uninit_tdp_mmu+0x3e/0x50 [kvm] Call Trace: <TASK> kvm_arch_destroy_vm+0x130/0x1b0 [kvm] kvm_destroy_vm+0x162/0x2a0 [kvm] kvm_vcpu_release+0x34/0x60 [kvm] __fput+0x82/0x240 task_work_run+0x5c/0x90 do_exit+0x364/0xa10 ? futex_unqueue+0x38/0x60 do_group_exit+0x33/0xa0 get_signal+0x155/0x850 arch_do_signal_or_restart+0xed/0x750 exit_to_user_mode_prepare+0xc5/0x120 syscall_exit_to_user_mode+0x1d/0x40 do_syscall_64+0x48/0xc0 entry_SYSCALL_64_after_hwframe+0x44/0xae If kvm_tdp_mmu_zap_all() skips a gfn/SPTE but that SPTE is then zapped by kvm_tdp_mmu_put_root(), KVM triggers a use-after-free in the form of marking a struct page as dirty/accessed after it has been put back on the free list. This directly triggers a WARN due to encountering a page with page_count() == 0, but it can also lead to data corruption and additional errors in the kernel. WARNING: CPU: 7 PID: 1995658 at arch/x86/kvm/../../../virt/kvm/kvm_main.c:171 RIP: 0010:kvm_is_zone_device_pfn.part.0+0x9e/0xd0 [kvm] Call Trace: <TASK> kvm_set_pfn_dirty+0x120/0x1d0 [kvm] __handle_changed_spte+0x92e/0xca0 [kvm] __handle_changed_spte+0x63c/0xca0 [kvm] __handle_changed_spte+0x63c/0xca0 [kvm] __handle_changed_spte+0x63c/0xca0 [kvm] zap_gfn_range+0x549/0x620 [kvm] kvm_tdp_mmu_put_root+0x1b6/0x270 [kvm] mmu_free_root_page+0x219/0x2c0 [kvm] kvm_mmu_free_roots+0x1b4/0x4e0 [kvm] kvm_mmu_unload+0x1c/0xa0 [kvm] kvm_arch_destroy_vm+0x1f2/0x5c0 [kvm] kvm_put_kvm+0x3b1/0x8b0 [kvm] kvm_vcpu_release+0x4e/0x70 [kvm] __fput+0x1f7/0x8c0 task_work_run+0xf8/0x1a0 do_exit+0x97b/0x2230 do_group_exit+0xda/0x2a0 get_signal+0x3be/0x1e50 arch_do_signal_or_restart+0x244/0x17f0 exit_to_user_mode_prepare+0xcb/0x120 syscall_exit_to_user_mode+0x1d/0x40 do_syscall_64+0x4d/0x90 entry_SYSCALL_64_after_hwframe+0x44/0xae Note, the underlying bug existed even before commit 1af4a960 ("KVM: x86/mmu: Yield in TDU MMU iter even if no SPTES changed") moved calls to tdp_mmu_iter_cond_resched() to the beginning of loops, as KVM could still incorrectly advance past a top-level entry when yielding on a lower-level entry. But with respect to leaking shadow pages, the bug was introduced by yielding before processing the current gfn. Alternatively, tdp_mmu_iter_cond_resched() could simply fall through, or callers could jump to their "retry" label. The downside of that approach is that tdp_mmu_iter_cond_resched() _must_ be called before anything else in the loop, and there's no easy way to enfornce that requirement. Ideally, KVM would handling the cond_resched() fully within the iterator macro (the code is actually quite clean) and avoid this entire class of bugs, but that is extremely difficult do while also supporting yielding after tdp_mmu_set_spte_atomic() fails. Yielding after failing to set a SPTE is very desirable as the "owner" of the REMOVED_SPTE isn't strictly bounded, e.g. if it's zapping a high-level shadow page, the REMOVED_SPTE may block operations on the SPTE for a significant amount of time. Fixes: faaf05b0 ("kvm: x86/mmu: Support zapping SPTEs in the TDP MMU") Fixes: 1af4a960 ("KVM: x86/mmu: Yield in TDU MMU iter even if no SPTES changed") Reported-by:
Ignat Korchagin <ignat@cloudflare.com> Cc: stable@vger.kernel.org Signed-off-by:
Sean Christopherson <seanjc@google.com> Message-Id: <20211214033528.123268-1-seanjc@google.com> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Marc Orr authored
commit c5063551 upstream. The kvm_run struct's if_flag is a part of the userspace/kernel API. The SEV-ES patches failed to set this flag because it's no longer needed by QEMU (according to the comment in the source code). However, other hypervisors may make use of this flag. Therefore, set the flag for guests with encrypted registers (i.e., with guest_state_protected set). Fixes: f1c6366e ("KVM: SVM: Add required changes to support intercepts under SEV-ES") Signed-off-by:
Marc Orr <marcorr@google.com> Message-Id: <20211209155257.128747-1-marcorr@google.com> Cc: stable@vger.kernel.org Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com> Reviewed-by:
Maxim Levitsky <mlevitsk@redhat.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Johan Hovold authored
commit 26a8b094 upstream. In case device registration fails during module initialisation, the platform device structure needs to be freed using platform_device_put() to properly free all resources (e.g. the device name). Fixes: 938835aa ("platform/x86: intel_pmc_core: do not create a static struct device") Cc: stable@vger.kernel.org # 5.9 Signed-off-by:
Johan Hovold <johan@kernel.org> Reviewed-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Link: https://lore.kernel.org/r/20211222105023.6205-1-johan@kernel.org Signed-off-by:
Hans de Goede <hdegoede@redhat.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Mario Limonciello authored
commit 09fc1406 upstream. This driver is intended to be used exclusively for suspend to idle so callbacks to send OS_HINT during hibernate and S5 will set OS_HINT at the wrong time leading to an undefined behavior. Cc: stable@vger.kernel.org Signed-off-by:
Mario Limonciello <mario.limonciello@amd.com> Link: https://lore.kernel.org/r/20211210143529.10594-1-mario.limonciello@amd.com Reviewed-by:
Hans de Goede <hdegoede@redhat.com> Signed-off-by:
Hans de Goede <hdegoede@redhat.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Andrew Cooper authored
commit 57690554 upstream. Both __pkru_allows_write() and arch_set_user_pkey_access() shift PKRU_WD_BIT (a signed constant) by up to 30 bits, hitting the sign bit. Use unsigned constants instead. Clearly pkey 15 has not been used in combination with UBSAN yet. Noticed by code inspection only. I can't actually provoke the compiler into generating incorrect logic as far as this shift is concerned. [ dhansen: add stable@ tag, plus minor changelog massaging, For anyone doing backports, these #defines were in arch/x86/include/asm/pgtable.h before 784a4661. ] Fixes: 33a709b2 ("mm/gup, x86/mm/pkeys: Check VMAs and PTEs for protection keys") Signed-off-by:
Andrew Cooper <andrew.cooper3@citrix.com> Signed-off-by:
Dave Hansen <dave.hansen@linux.intel.com> Signed-off-by:
Borislav Petkov <bp@suse.de> Cc: stable@vger.kernel.org Link: https://lkml.kernel.org/r/20211216000856.4480-1-andrew.cooper3@citrix.com Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Jens Wiklander authored
commit dfd0743f upstream. Since the tee subsystem does not keep a strong reference to its idle shared memory buffers, it races with other threads that try to destroy a shared memory through a close of its dma-buf fd or by unmapping the memory. In tee_shm_get_from_id() when a lookup in teedev->idr has been successful, it is possible that the tee_shm is in the dma-buf teardown path, but that path is blocked by the teedev mutex. Since we don't have an API to tell if the tee_shm is in the dma-buf teardown path or not we must find another way of detecting this condition. Fix this by doing the reference counting directly on the tee_shm using a new refcount_t refcount field. dma-buf is replaced by using anon_inode_getfd() instead, this separates the life-cycle of the underlying file from the tee_shm. tee_shm_put() is updated to hold the mutex when decreasing the refcount to 0 and then remove the tee_shm from teedev->idr before releasing the mutex. This means that the tee_shm can never be found unless it has a refcount larger than 0. Fixes: 967c9cca ("tee: generic TEE subsystem") Cc: stable@vger.kernel.org Reviewed-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Reviewed-by:
Lars Persson <larper@axis.com> Reviewed-by:
Sumit Garg <sumit.garg@linaro.org> Reported-by:
Patrik Lantz <patrik.lantz@axis.com> Signed-off-by:
Jens Wiklander <jens.wiklander@linaro.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
John David Anglin authored
commit d3a5a68c upstream. The address bits used to select the futex spinlock need to match those used in the LWS code in syscall.S. The mask 0x3f8 only selects 7 bits. It should select 8 bits. This change fixes the glibc nptl/tst-cond24 and nptl/tst-cond25 tests. Signed-off-by:
John David Anglin <dave.anglin@bell.net> Fixes: 53a42b63 ("parisc: Switch to more fine grained lws locks") Cc: stable@vger.kernel.org # 5.10+ Signed-off-by:
Helge Deller <deller@gmx.de> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
John David Anglin authored
commit 8f66fce0 upstream. The completer in the "or,ev %r1,%r30,%r30" instruction is reversed, so we are not clipping the LWS number when we are called from a 32-bit process (W=0). We need to nulify the following depdi instruction when the least-significant bit of %r30 is 1. If the %r20 register is not clipped, a user process could perform a LWS call that would branch to an undefined location in the kernel and potentially crash the machine. Signed-off-by:
John David Anglin <dave.anglin@bell.net> Cc: stable@vger.kernel.org # 4.19+ Signed-off-by:
Helge Deller <deller@gmx.de> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Thadeu Lima de Souza Cascardo authored
commit 75d70d76 upstream. If the workqueue allocation fails, the driver is marked as not initialized, and timer and panic_notifier will be left registered. Instead of removing those when workqueue allocation fails, do the workqueue initialization before doing it, and cleanup srcu_struct if it fails. Fixes: 1d49eb91 ("ipmi: Move remove_work to dedicated workqueue") Signed-off-by:
Thadeu Lima de Souza Cascardo <cascardo@canonical.com> Cc: Corey Minyard <cminyard@mvista.com> Cc: Ioanna Alifieraki <ioanna-maria.alifieraki@canonical.com> Cc: stable@vger.kernel.org Message-Id: <20211217154410.1228673-2-cascardo@canonical.com> Signed-off-by:
Corey Minyard <cminyard@mvista.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Mian Yousaf Kaukab authored
commit 34f35f8f upstream. During probe ssif_info->client is dereferenced in error path. However, it is set when some of the error checking has already been done. This causes following kernel crash if an error path is taken: [ 30.645593][ T674] ipmi_ssif 0-000e: ipmi_ssif: Not probing, Interface already present [ 30.657616][ T674] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000088 ... [ 30.657723][ T674] pc : __dev_printk+0x28/0xa0 [ 30.657732][ T674] lr : _dev_err+0x7c/0xa0 ... [ 30.657772][ T674] Call trace: [ 30.657775][ T674] __dev_printk+0x28/0xa0 [ 30.657778][ T674] _dev_err+0x7c/0xa0 [ 30.657781][ T674] ssif_probe+0x548/0x900 [ipmi_ssif 62ce4b08badc1458fd896206d9ef69a3c31f3d3e] [ 30.657791][ T674] i2c_device_probe+0x37c/0x3c0 ... Initialize ssif_info->client before any error path can be taken. Clear i2c_client data in the error path to prevent the dangling pointer from leaking. Fixes: c4436c91 ("ipmi_ssif: avoid registering duplicate ssif interface") Cc: stable@vger.kernel.org # 5.4.x Suggested-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
Mian Yousaf Kaukab <ykaukab@suse.de> Message-Id: <20211208093239.4432-1-ykaukab@suse.de> Signed-off-by:
Corey Minyard <cminyard@mvista.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Thadeu Lima de Souza Cascardo authored
commit 2b5160b1 upstream. In case, init_srcu_struct fails (because of memory allocation failure), we might proceed with the driver initialization despite srcu_struct not being entirely initialized. Fixes: 913a89f0 ("ipmi: Don't initialize anything in the core until something uses it") Signed-off-by:
Thadeu Lima de Souza Cascardo <cascardo@canonical.com> Cc: Corey Minyard <cminyard@mvista.com> Cc: stable@vger.kernel.org Message-Id: <20211217154410.1228673-1-cascardo@canonical.com> Signed-off-by:
Corey Minyard <cminyard@mvista.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
José Expósito authored
commit 12f247ab upstream. The "id_buf" buffer is stored in "data->raw_info_block" and freed by "mxt_free_object_table" in case of error. Return instead of jumping to avoid a double free. Addresses-Coverity-ID: 1474582 ("Double free") Fixes: 068bdb67 ("Input: atmel_mxt_ts - fix the firmware update") Signed-off-by:
José Expósito <jose.exposito89@gmail.com> Link: https://lore.kernel.org/r/20211212194257.68879-1-jose.exposito89@gmail.com Cc: stable@vger.kernel.org Signed-off-by:
Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Dmitry Osipenko authored
commit db635ba4 upstream. UCM of Acer Chromebook (Nyan) uses a different name for the headphones jack. The name was changed during unification of the machine drivers and UCM fails now to load because of that. Restore the old jack name. Cc: <stable@vger.kernel.org> Fixes: cc8f70f5 ("ASoC: tegra: Unify ASoC machine drivers") Reported-by: Thomas Graichen <thomas.graichen@gmail.com> # T124 Nyan Big Tested-by: Thomas Graichen <thomas.graichen@gmail.com> # T124 Nyan Big Signed-off-by:
Dmitry Osipenko <digetx@gmail.com> Link: https://lore.kernel.org/r/20211211231146.6137-2-digetx@gmail.com Signed-off-by:
Mark Brown <broonie@kernel.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Dmitry Osipenko authored
commit d341b427 upstream. UCM of Acer Chromebook (Nyan) uses DAPM switches of headphones and mic jack. These switches were lost by accident during unification of the machine drivers, restore them. Cc: <stable@vger.kernel.org> Fixes: cc8f70f5 ("ASoC: tegra: Unify ASoC machine drivers") Reported-by: Thomas Graichen <thomas.graichen@gmail.com> # T124 Nyan Big Tested-by: Thomas Graichen <thomas.graichen@gmail.com> # T124 Nyan Big Signed-off-by:
Dmitry Osipenko <digetx@gmail.com> Link: https://lore.kernel.org/r/20211211231146.6137-1-digetx@gmail.com Signed-off-by:
Mark Brown <broonie@kernel.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Martin Blumenstingl authored
commit ee907afb upstream. The out-of-tree vendor driver uses the following approach to set the AIU_I2S_MISC register: 1) write AIU_MEM_I2S_START_PTR and AIU_MEM_I2S_RD_PTR 2) configure AIU_I2S_MUTE_SWAP[15:0] 3) write AIU_MEM_I2S_END_PTR 4) set AIU_I2S_MISC[2] to 1 (documented as: "put I2S interface in hold mode") 5) set AIU_I2S_MISC[4] to 1 (depending on the driver revision it always stays at 1 while for older drivers this bit is unset in step 4) 6) set AIU_I2S_MISC[2] to 0 7) write AIU_MEM_I2S_MASKS 8) toggle AIU_MEM_I2S_CONTROL[0] 9) toggle AIU_MEM_I2S_BUF_CNTL[0] Move setting the AIU_I2S_MISC[2] bit to aiu_fifo_i2s_hw_params() so it resembles the flow in the vendor kernel more closely. While here also configure AIU_I2S_MISC[4] (documented as: "force each audio data to left or right according to the bit attached with the audio data") similar to how the vendor driver does this. This fixes the infamou...
-
Werner Sembach authored
commit edca7cc4 upstream. The Clevo NJ51CU comes either with the ALC293 or the ALC256 codec, but uses the 0x8686 subproduct id in both cases. The ALC256 codec needs a different quirk for the headset microphone working and and edditional quirk for sound working after suspend and resume. When waking up from s3 suspend the Coef 0x10 is set to 0x0220 instead of 0x0020 on the ALC256 codec. Setting the value manually makes the sound work again. This patch does this automatically. [ minor coding style fix by tiwai ] Signed-off-by:
Werner Sembach <wse@tuxedocomputers.com> Fixes: b5acfe15 ("ALSA: hda/realtek: Add some Clove SSID in the ALC293(ALC1220)") Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20211215191646.844644-1-wse@tuxedocomputers.com Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Jeremy Szu authored
commit f7ac570d upstream. There is a HP ProBook which using ALC236 codec and need the ALC236_FIXUP_HP_MUTE_LED_MICMUTE_VREF quirk to make mute LED and micmute LED work. Signed-off-by:
Jeremy Szu <jeremy.szu@canonical.com> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20211214164156.49711-1-jeremy.szu@canonical.com Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Bradley Scott authored
commit aa723946 upstream. Adds a new "alc285-hp-amp-init" model that can be used to apply the ALC285 HP speaker amplifier initialization fixup to devices that are not already known by passing "hda_model=alc285-hp-amp-init" to the snd-sof-intel-hda-common module or "model=alc285-hp-amp-init" to the snd-hda-intel module, depending on which is being used. Signed-off-by:
Bradley Scott <bscott@teksavvy.com> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20211213162246.506838-1-bscott@teksavvy.com Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Bradley Scott authored
commit d296a74b upstream. HP ZBook 15 G6 (SSID 103c:860f) needs the same speaker amplifier initialization as used on several other HP laptops using ALC285. Signed-off-by:
Bradley Scott <Bradley.Scott@zebra.com> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20211213154938.503201-1-Bradley.Scott@zebra.com Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Ville Syrjälä authored
commit b6fd7747 upstream. The silent stream stuff recurses back into i915 audio component .get_power() from the .pin_eld_notify() hook. On GLK this will deadlock as i915 may already be holding the relevant modeset locks during .pin_eld_notify() and the GLK audio vs. CDCLK workaround will try to grab the same locks from .get_power(). Until someone comes up with a better fix just disable the silent stream support on GLK. Cc: stable@vger.kernel.org Cc: Harsha Priya <harshapriya.n@intel.com> Cc: Emmanuel Jillela <emmanuel.jillela@intel.com> Cc: Kai Vehmanen <kai.vehmanen@linux.intel.com> Cc: Takashi Iwai <tiwai@suse.de> Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/2623 Fixes: 951894cf ("ALSA: hda/hdmi: Add Intel silent stream support") Signed-off-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by:
Kai Vehmanen <kai.vehmanen@linux.intel.com> Link: https://lore.kernel.org/r/20211222145350.24342-1-ville.syrjala@linux.intel.com Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Jaroslav Kysela authored
commit 39a8fc49 upstream. The user_pversion was uninitialized for the user space file structure in the open function, because the file private structure use kmalloc for the allocation. The kernel ALSA sequencer code clears the file structure, so no additional fixes are required. Cc: stable@kernel.org Cc: broonie@kernel.org BugLink: https://github.com/alsa-project/alsa-lib/issues/178 Fixes: 09d23174 ("ALSA: rawmidi: introduce SNDRV_RAWMIDI_IOCTL_USER_PVERSION") Reported-by:
<syzbot+88412ee8811832b00dbe@syzkaller.appspotmail.com> Signed-off-by:
Jaroslav Kysela <perex@perex.cz> Link: https://lore.kernel.org/r/20211218123925.2583847-1-perex@perex.cz Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Colin Ian King authored
commit 2dee54b2 upstream. Static analysis with scan-build has found an assignment to vp2 that is never used. It seems that the check on vp->state > 0 should be actually on vp2->state instead. Fix this. This dates back to 2002, I found the offending commit from the git history git://git.kernel.org/pub/scm/linux/kernel/git/tglx/history.git , commit 91e39521bbf6 ("[PATCH] ALSA patch for 2.5.4") Signed-off-by:
Colin Ian King <colin.i.king@gmail.com> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20211212172025.470367-1-colin.i.king@gmail.com Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Xiaoke Wang authored
commit c01c1db1 upstream. kstrdup() can return NULL, it is better to check the return value of it. Signed-off-by:
Xiaoke Wang <xkernel.wang@foxmail.com> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/tencent_094816F3522E0DC704056C789352EBBF0606@qq.com Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Mike Rapoport authored
commit 2f5b3514 upstream. The memory reservation in arch/x86/platform/efi/efi.c depends on at least two command line parameters. Put it back later in the boot process and move efi_memblock_x86_reserve_range() out of early_memory_reserve(). An attempt to fix this was done in 8d48bf82 ("x86/boot: Pull up cmdline preparation and early param parsing") but that caused other troubles so it got reverted. The bug this is addressing is: Dan reports that Anjaneya Chagam can no longer use the efi=nosoftreserve kernel command line parameter to suppress "soft reservation" behavior. This is due to the fact that the following call-chain happens at boot: early_reserve_memory |-> efi_memblock_x86_reserve_range |-> efi_fake_memmap_early which does if (!efi_soft_reserve_enabled()) return; and that would have set EFI_MEM_NO_SOFT_RESERVE after having parsed "nosoftreserve". However, parse_early_param() gets called *after* it, leading to the boot cmdline not being taken into account. See also https://lore.kernel.org/r/e8dd8993c38702ee6dd73b3c11f158617e665607.camel@intel.com [ bp: Turn into a proper patch. ] Signed-off-by:
Mike Rapoport <rppt@kernel.org> Signed-off-by:
Borislav Petkov <bp@suse.de> Link: https://lore.kernel.org/r/20211213112757.2612-4-bp@alien8.de Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Borislav Petkov authored
commit fbe61839 upstream. This reverts commit 8d48bf82. It turned out to be a bad idea as it broke supplying mem= cmdline parameters due to parse_memopt() requiring preparatory work like setting up the e820 table in e820__memory_setup() in order to be able to exclude the range specified by mem=. Pulling that up would've broken Xen PV again, see threads at https://lkml.kernel.org/r/20210920120421.29276-1-jgross@suse.com due to xen_memory_setup() needing the first reservations in early_reserve_memory() - kernel and initrd - to have happened already. This could be fixed again by having Xen do those reservations itself... Long story short, revert this and do a simpler fix in a later patch. Signed-off-by:
Borislav Petkov <bp@suse.de> Link: https://lore.kernel.org/r/20211213112757.2612-3-bp@alien8.de Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Philipp Rudo authored
[ Upstream commit 71d2bcec ] When booting with crashkernel= on the kernel command line a warning similar to Kernel command line: ro console=ttyS0 crashkernel=256M Unknown kernel command line parameters "crashkernel=256M", will be passed to user space. is printed. This comes from crashkernel= being parsed independent from the kernel parameter handling mechanism. So the code in init/main.c doesn't know that crashkernel= is a valid kernel parameter and prints this incorrect warning. Suppress the warning by adding a dummy early_param handler for crashkernel=. Link: https://lkml.kernel.org/r/20211208133443.6867-1-prudo@redhat.com Fixes: 86d1919a ("init: print out unknown kernel parameters") Signed-off-by:
Philipp Rudo <prudo@redhat.com> Acked-by:
Baoquan He <bhe@redhat.com> Cc: Andrew Halaney <ahalaney@redhat.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torv...
-
Andy Shevchenko authored
[ Upstream commit 4f6c131c ] While introduction of this menu brings a nice view in the configuration tools, it brought more issues than solves, i.e. it prevents to locate files in the intel/ subfolder without touching non-related Kconfig dependencies elsewhere. Drop X86_PLATFORM_DRIVERS_INTEL altogether. Note, on x86 it's enabled by default and it's quite unlikely anybody wants to disable all of the modules in this submenu. Fixes: 8bd836fe ("platform/x86: intel_skl_int3472: Move to intel/ subfolder") Suggested-by:
Hans de Goede <hdegoede@redhat.com> Signed-off-by:
Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20211222194941.76054-1-andriy.shevchenko@linux.intel.com Reviewed-by:
Hans de Goede <hdegoede@redhat.com> Signed-off-by:
Hans de Goede <hdegoede@redhat.com> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Josh Poimboeuf authored
[ Upstream commit dcce50e6 ] When building with Clang and CONFIG_TRACE_BRANCH_PROFILING, there are a lot of unreachable warnings, like: arch/x86/kernel/traps.o: warning: objtool: handle_xfd_event()+0x134: unreachable instruction Without an input to the inline asm, 'volatile' is ignored for some reason and Clang feels free to move the reachable() annotation away from its intended location. Fix that by re-adding the counter value to the inputs. Fixes: f1069a87 ("compiler.h: Avoid using inline asm operand modifiers") Fixes: c199f64f ("instrumentation.h: Avoid using inline asm operand modifiers") Reported-by:
kernel test robot <lkp@intel.com> Signed-off-by:
Josh Poimboeuf <jpoimboe@redhat.com> Link: https://lore.kernel.org/r/0417e96909b97a406323409210de7bf13df0b170.1636410380.git.jpoimboe@redhat.com Cc: Peter Zijlstra <peterz@infradead.org> Cc: x86@kernel.org Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Miroslav Benes <mbenes@suse.cz> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Ismael Luceno authored
[ Upstream commit cb8747b7 ] This macro is defined by glibc itself, which makes the issue go unnoticed on those systems. On non-glibc systems it causes build failures on several utilities and libraries, like bpftool and objtool. Fixes: 1d509f2a ("x86/insn: Support big endian cross-compiles") Fixes: 2d7ce0e8 ("tools/virtio: more stubs") Fixes: 3fb321fd ("selftests/net: ipv6 flowlabel") Fixes: 50b3ed57 ("selftests/bpf: test bpf flow dissection") Fixes: 9cacf81f ("bpf: Remove extra lock_sock for TCP_ZEROCOPY_RECEIVE") Fixes: a4b20612 ("tools include uapi: Grab a copy of linux/in.h") Fixes: b12d6ec0 ("bpf: btf: add btf print functionality") Fixes: c0dd9678 ("tools, include: Grab a copy of linux/erspan.h") Fixes: c4b6014e ("tools: Add copy of perf_event.h to tools/include/linux/") Signed-off-by:
Ismael Luceno <ismael@iodev.co.uk> Acked-by:
Masami Hiramatsu <mhiramat@kernel.org> Signed-off-by:
Josh Poimboeuf <jpoimboe@redhat.com> Link: https://lore.kernel.org/r/20211115134647.1921-1-ismael@iodev.co.uk Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Vasily Gorbik <gor@linux.ibm.com> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Vladimir Murzin authored
[ Upstream commit 7202216a ] __secondary_data used to reside in r7 around call to PROCINFO_INITFUNC. After commit 95731b8e ("ARM: 9059/1: cache-v7: get rid of mini-stack") r7 is used as a scratch register, so we have to reload __secondary_data before we setup the stack pointer. Fixes: 95731b8e ("ARM: 9059/1: cache-v7: get rid of mini-stack") Signed-off-by:
Vladimir Murzin <vladimir.murzin@arm.com> Signed-off-by:
Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Guenter Roeck authored
[ Upstream commit 16ba51b5 ] Tests with a real chip and a closer look into the datasheet show that MAX6654 does not support CRIT/THERM/OVERTEMP limits, so drop support of the respective attributes for this chip. Introduce LM90_HAVE_CRIT flag and use it to instantiate critical limit attributes to solve the problem. Cc: Josh Lehan <krellan@google.com> Fixes: 229d495d ("hwmon: (lm90) Add max6654 support to lm90 driver") Signed-off-by:
Guenter Roeck <linux@roeck-us.net> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Guenter Roeck authored
[ Upstream commit f8344f76 ] TMP461 is almost identical to TMP451 and was actually detected as TMP451 with the existing lm90 driver if its I2C address is 0x4c. Add support for it to the lm90 driver. At the same time, improve the chip detection function to at least try to distinguish between TMP451 and TMP461. As a side effect, this fixes commit 24333ac2 ("hwmon: (tmp401) use smb word operations instead of 2 smb byte operations"). TMP461 does not support word operations on temperature registers, which causes bad temperature readings with the tmp401 driver. The lm90 driver does not perform word operations on temperature registers and thus does not have this problem. Support is listed as basic because TMP461 supports a sensor resolution of 0.0625 degrees C, while the lm90 driver assumes a resolution of 0.125 degrees C. Also, the TMP461 supports negative temperatures with its default temperature range, which is not the case for similar chips supported by the lm90 and the tmp401 drivers. Those limitations will be addressed with follow-up patches. Fixes: 24333ac2 ("hwmon: (tmp401) use smb word operations instead of 2 smb byte operations") Reported-by:
David T. Wilson <david.wilson@nasa.gov> Cc: David T. Wilson <david.wilson@nasa.gov> Signed-off-by:
Guenter Roeck <linux@roeck-us.net> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-