- Sep 15, 2022
-
-
Niek Nooijens authored
commit 001047ea upstream. works perfectly with: modprobe ftdi_sio echo "0590 00b2" | tee /sys/module/ftdi_sio/drivers/usb-serial\:ftdi_sio/new_id > /dev/null but doing this every reboot is a pain in the ass. Signed-off-by:
Niek Nooijens <niek.nooijens@omron.com> Cc: stable@vger.kernel.org Signed-off-by:
Johan Hovold <johan@kernel.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Johan Hovold authored
commit d245f43a upstream. The probe session-duplication overflow check incremented the session count also when there were no more available sessions so that memory beyond the fixed-size slab-allocated session array could be corrupted in fastrpc_session_alloc() on open(). Fixes: f6f9279f ("misc: fastrpc: Add Qualcomm fastrpc basic driver model") Cc: stable@vger.kernel.org # 5.1 Signed-off-by:
Johan Hovold <johan+linaro@kernel.org> Link: https://lore.kernel.org/r/20220829080531.29681-3-johan+linaro@kernel.org Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Johan Hovold authored
commit 9baa1415 upstream. Add the missing sanity check on the probed-session count to avoid corrupting memory beyond the fixed-size slab-allocated session array when there are more than FASTRPC_MAX_SESSIONS sessions defined in the devicetree. Fixes: f6f9279f ("misc: fastrpc: Add Qualcomm fastrpc basic driver model") Cc: stable@vger.kernel.org # 5.1 Signed-off-by:
Johan Hovold <johan+linaro@kernel.org> Link: https://lore.kernel.org/r/20220829080531.29681-2-johan+linaro@kernel.org Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Marcus Folkesson authored
commit 9e2238e3 upstream. The ADC conversion is actually not rail-to-rail but with a factor 1.5. Make use of this factor when calculating actual voltage. Fixes: 3a89b289 ("iio: adc: add support for mcp3911") Signed-off-by:
Marcus Folkesson <marcus.folkesson@gmail.com> Reviewed-by:
Andy Shevchenko <andy.shevchenko@gmail.com> Link: https://lore.kernel.org/r/20220722130726.7627-4-marcus.folkesson@gmail.com Cc: <Stable@vger.kernel.org> Signed-off-by:
Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Tetsuo Handa authored
commit 98e01215 upstream. syzbot is reporting hung task at __input_unregister_device() [1], for iforce_close() waiting at wait_event_interruptible() with dev->mutex held is blocking input_disconnect_device() from __input_unregister_device(). It seems that the cause is simply that commit c2b27ef6 ("Input: iforce - wait for command completion when closing the device") forgot to call wake_up() after clear_bit(). Fix this problem by introducing a helper that calls clear_bit() followed by wake_up_all(). Reported-by:
syzbot <syzbot+deb6abc36aad4008f407@syzkaller.appspotmail.com> Fixes: c2b27ef6 ("Input: iforce - wait for command completion when closing the device") Tested-by:
syzbot <syzbot+deb6abc36aad4008f407@syzkaller.appspotmail.com> Suggested-by:
Fabio M. De Francesco <fmdefrancesco@gmail.com> Co-developed-by:
Hillf Danton <hdanton@sina.com> Signed-off-by:
Hillf Danton <hdanton@sina.com> Signed-off-by:
Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Link: https://lore.kernel.org/r/887021c3-4f13-40ce-c8b9-aa6e09faa3a7@I-love.SAKURA.ne.jp Cc: stable@vger.kernel.org Signed-off-by:
Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Sherry Sun authored
commit d5a2e083 upstream. When the user initializes the uart port, and waits for the transmit engine to complete in lpuart32_set_termios(), if the UART TX fifo has dirty data and the UARTMODIR enable the flow control, the TX fifo may never be empty. So here we should disable the flow control first to make sure the transmit engin can complete. Fixes: 380c966c ("tty: serial: fsl_lpuart: add 32-bit register interface support") Cc: stable <stable@kernel.org> Signed-off-by:
Sherry Sun <sherry.sun@nxp.com> Link: https://lore.kernel.org/r/20220821101527.10066-1-sherry.sun@nxp.com Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Helge Deller authored
commit 566f9c9f upstream. When changing the console font with ioctl(KDFONTOP) the new font size can be bigger than the previous font. A previous selection may thus now be outside of the new screen size and thus trigger out-of-bounds accesses to graphics memory if the selection is removed in vc_do_resize(). Prevent such out-of-memory accesses by dropping the selection before the various con_font_set() console handlers are called. Reported-by:
<syzbot+14b0e8f3fd1612e35350@syzkaller.appspotmail.com> Cc: stable <stable@kernel.org> Tested-by:
Khalid Masum <khalid.masum.92@gmail.com> Signed-off-by:
Helge Deller <deller@gmx.de> Link: https://lore.kernel.org/r/YuV9apZGNmGfjcor@p100 Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Masahiro Yamada authored
commit c7acee3d upstream. Christophe Leroy reported that commit 7b453719 ("kbuild: link symbol CRCs at final link, removing CONFIG_MODULE_REL_CRCS") broke mpc85xx_defconfig + CONFIG_RELOCATABLE=y. LD vmlinux SYSMAP System.map SORTTAB vmlinux CHKREL vmlinux WARNING: 451 bad relocations c0b312a9 R_PPC_UADDR32 .head.text-0x3ff9ed54 c0b312ad R_PPC_UADDR32 .head.text-0x3ffac224 c0b312b1 R_PPC_UADDR32 .head.text-0x3ffb09f4 c0b312b5 R_PPC_UADDR32 .head.text-0x3fe184dc c0b312b9 R_PPC_UADDR32 .head.text-0x3fe183a8 ... The compiler emits a bunch of R_PPC_UADDR32, which is not supported by arch/powerpc/kernel/reloc_32.S. The reason is there exists an unaligned symbol. $ powerpc-linux-gnu-nm -n vmlinux ... c0b31258 d spe_aligninfo c0b31298 d __func__.0 c0b312a9 D sys_call_table c0b319b8 d __func__.0 Commit 7b453719 is not the root cause. Even before that, I can reproduce the same issue for mpc85xx_defconfig + CONFIG_RELOCATABLE=y + CONFIG_MODVERSIONS=n. It is just that nobody noticed because when CONFIG_MODVERSIONS is enabled, a __crc_* symbol inserted before sys_call_table was hiding the unalignment issue. Adding alignment to the syscall table for ppc32 fixes the issue. Cc: stable@vger.kernel.org Reported-by:
Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by:
Masahiro Yamada <masahiroy@kernel.org> Tested-by:
Christophe Leroy <christophe.leroy@csgroup.eu> [mpe: Trim change log discussion, add Cc stable] Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/lkml/38605f6a-a568-f884-f06f-ea4da5b214f0@csgroup.eu/ Link: https://lore.kernel.org/r/20220820165129.1147589-1-masahiroy@kernel.org Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Dan Carpenter authored
commit e230a445 upstream. _Read/Write_MACREG callbacks are NULL so the read/write_macreg_hdl() functions don't do anything except free the "pcmd" pointer. It results in a use after free. Delete them. Fixes: 2865d42c ("staging: r8712u: Add the new driver to the mainline kernel") Cc: stable <stable@kernel.org> Reported-by:
Zheng Wang <hackerzheng666@gmail.com> Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Link: https://lore.kernel.org/r/Yw4ASqkYcUhUfoY2@kili Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Shenwei Wang authored
commit 846651ec upstream. The setting of RS485 RTS polarity is inverse in the current driver. When the property of 'rs485-rts-active-low' is enabled in the dts node, the RTS signal should be LOW during sending. Otherwise, if there is no such a property, the RTS should be HIGH during sending. Fixes: 03895cf4 ("tty: serial: fsl_lpuart: Add support for RS-485") Cc: stable <stable@kernel.org> Signed-off-by:
Nicolas Diaz <nicolas.diaz@nxp.com> Signed-off-by:
Shenwei Wang <shenwei.wang@nxp.com> Link: https://lore.kernel.org/r/20220805144529.604856-1-shenwei.wang@nxp.com Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Yacan Liu authored
[ Upstream commit a8424a9b ] For passive connections, the refcount increment has been done in smc_clcsock_accept()-->smc_sock_alloc(). Fixes: 3b2dec26 ("net/smc: restructure client and server code in af_smc") Signed-off-by:
Yacan Liu <liuyacan@corp.netease.com> Reviewed-by:
Tony Lu <tonylu@linux.alibaba.com> Link: https://lore.kernel.org/r/20220830152314.838736-1-liuyacan@corp.netease.com Signed-off-by:
Paolo Abeni <pabeni@redhat.com> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Jakub Kicinski authored
[ Upstream commit 0b4f688d ] This reverts commit 90fabae8. Patch was applied hastily, revert and let the v2 be reviewed. Fixes: 90fabae8 ("sch_cake: Return __NET_XMIT_STOLEN when consuming enqueued skb") Link: https://lore.kernel.org/all/87wnao2ha3.fsf@toke.dk/ Signed-off-by:
Jakub Kicinski <kuba@kernel.org> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Eric Dumazet authored
[ Upstream commit 8c705212 ] challenge_timestamp can be read an written by concurrent threads. This was expected, but we need to annotate the race to avoid potential issues. Following patch moves challenge_timestamp and challenge_count to per-netns storage to provide better isolation. Fixes: 354e4aa3 ("tcp: RFC 5961 5.2 Blind Data Injection Attack Mitigation") Reported-by:
syzbot <syzkaller@googlegroups.com> Signed-off-by:
Eric Dumazet <edumazet@google.com> Acked-by:
Neal Cardwell <ncardwell@google.com> Signed-off-by:
Jakub Kicinski <kuba@kernel.org> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Toke Høiland-Jørgensen authored
[ Upstream commit 90fabae8 ] When the GSO splitting feature of sch_cake is enabled, GSO superpackets will be broken up and the resulting segments enqueued in place of the original skb. In this case, CAKE calls consume_skb() on the original skb, but still returns NET_XMIT_SUCCESS. This can confuse parent qdiscs into assuming the original skb still exists, when it really has been freed. Fix this by adding the __NET_XMIT_STOLEN flag to the return value in this case. Fixes: 0c850344 ("sch_cake: Conditionally split GSO segments") Signed-off-by:
Toke Høiland-Jørgensen <toke@toke.dk> Reported-by: zdi-disclosures@trendmicro.com # ZDI-CAN-18231 Link: https://lore.kernel.org/r/20220831092103.442868-1-toke@toke.dk Signed-off-by:
Jakub Kicinski <kuba@kernel.org> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Cong Wang authored
[ Upstream commit 8fc29ff3 ] strp_init() is called just a few lines above this csk->sk_user_data check, it also initializes strp->work etc., therefore, it is unnecessary to call strp_done() to cancel the freshly initialized work. And if sk_user_data is already used by KCM, psock->strp should not be touched, particularly strp->work state, so we need to move strp_init() after the csk->sk_user_data check. This also makes a lockdep warning reported by syzbot go away. Reported-and-tested-by:
<syzbot+9fc084a4348493ef65d2@syzkaller.appspotmail.com> Reported-by:
<syzbot+e696806ef96cdd2d87cd@syzkaller.appspotmail.com> Fixes: e5571240 ("kcm: Check if sk_user_data already set in kcm_attach") Fixes: dff8baa2 ("kcm: Call strp_stop before strp_done in kcm_attach") Cc: Tom Herbert <tom@herbertland.com> Signed-off-by:
Cong Wang <cong.wang@bytedance.com> Link: https://lore.kernel.org/r/20220827181314.193710-1-xiyou.wangcong@gmail.com Signed-off-by:
Jakub Kicinski <kuba@kernel.org> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Duoming Zhou authored
[ Upstream commit c0955bf9 ] The function neigh_timer_handler() is a timer handler that runs in an atomic context. When used by rocker, neigh_timer_handler() calls "kzalloc(.., GFP_KERNEL)" that may sleep. As a result, the sleep in atomic context bug will happen. One of the processes is shown below: ofdpa_fib4_add() ... neigh_add_timer() (wait a timer) neigh_timer_handler() neigh_release() neigh_destroy() rocker_port_neigh_destroy() rocker_world_port_neigh_destroy() ofdpa_port_neigh_destroy() ofdpa_port_ipv4_neigh() kzalloc(sizeof(.., GFP_KERNEL) //may sleep This patch changes the gfp_t parameter of kzalloc() from GFP_KERNEL to GFP_ATOMIC in order to mitigate the bug. Fixes: 00fc0c51 ("rocker: Change world_ops API and implementation to be switchdev independant") Signed-off-by:
Duoming Zhou <duoming@zju.edu.cn> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Zhengchao Shao authored
[ Upstream commit b05972f0 ] The issue is the same to commit c2999f7f ("net: sched: multiq: don't call qdisc_put() while holding tree lock"). Qdiscs call qdisc_put() while holding sch tree spinlock, which results sleeping-while-atomic BUG. Fixes: c266f64d ("net: sched: protect block state with mutex") Signed-off-by:
Zhengchao Shao <shaozhengchao@huawei.com> Link: https://lore.kernel.org/r/20220826013930.340121-1-shaozhengchao@huawei.com Signed-off-by:
Paolo Abeni <pabeni@redhat.com> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Mathias Nyman authored
[ Upstream commit 8531aa16 ] This reverts commit 83810f84. Turning off port power in shutdown did cause issues such as a laptop not proprly powering off, and some specific usb devies failing to enumerate the subsequent boot after a warm reset. So revert this. Fixes: 83810f84 ("xhci: turn off port power in shutdown") Signed-off-by:
Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20220825150840.132216-4-mathias.nyman@linux.intel.com Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Dan Carpenter authored
[ Upstream commit d776763f ] The return type is supposed to be ssize_t, which is signed long, but "r" was declared as unsigned int. This means that on 64 bit systems we return positive values instead of negative error codes. Fixes: 80a3511d ("cfg80211: add debugfs HT40 allow map") Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Link: https://lore.kernel.org/r/YutvOQeJm0UjLhwU@kili Signed-off-by:
Johannes Berg <johannes.berg@intel.com> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Lin Ma authored
[ Upstream commit afe7116f ] There is a possible race condition (use-after-free) like below (FREE) | (USE) adf7242_remove | adf7242_channel cancel_delayed_work_sync | destroy_workqueue (1) | adf7242_cmd_rx | mod_delayed_work (2) | The root cause for this race is that the upper layer (ieee802154) is unaware of this detaching event and the function adf7242_channel can be called without any checks. To fix this, we can add a flag write at the beginning of adf7242_remove and add flag check in adf7242_channel. Or we can just defer the destructive operation like other commit 3e0588c2 ("hamradio: defer ax25 kfree after unregister_netdev") which let the ieee802154_unregister_hw() to handle the synchronization. This patch takes the second option. Fixes: 58e9683d ("net: ieee802154: adf7242: Fix OCL calibration runs") Signed-off-by:
Lin Ma <linma@zju.edu.cn> Acked-by:
Michael Hennerich <michael.hennerich@analog.com> Link: https://lore.kernel.org/r/20220808034224.12642-1-linma@zju.edu.cn Signed-off-by:
Stefan Schmidt <stefan@datenfreihafen.org> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Marcus Folkesson authored
[ Upstream commit 8f89e33b ] The device supports negative values as well. Fixes: 3a89b289 ("iio: adc: add support for mcp3911") Signed-off-by:
Marcus Folkesson <marcus.folkesson@gmail.com> Reviewed-by:
Andy Shevchenko <andy.shevchenko@gmail.com> Link: https://lore.kernel.org/r/20220722130726.7627-2-marcus.folkesson@gmail.com Signed-off-by:
Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Andy Shevchenko authored
[ Upstream commit 0a90ed8d ] On Intel hardware the SLP_TYPx bitfield occupies bits 10-12 as per ACPI specification (see Table 4.13 "PM1 Control Registers Fixed Hardware Feature Control Bits" for the details). Fix the mask and other related definitions accordingly. Fixes: 93e5eadd ("x86/platform: New Intel Atom SOC power management controller driver") Signed-off-by:
Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20220801113734.36131-1-andriy.shevchenko@linux.intel.com Reviewed-by:
Hans de Goede <hdegoede@redhat.com> Signed-off-by:
Hans de Goede <hdegoede@redhat.com> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Douglas Anderson authored
[ Upstream commit 1e00d6ac ] 3 regulators are listed but the number 2 is specified. Fix it. Fixes: 3a3ff88a ("drm/msm/dsi: Add 8x96 info in dsi_cfg") Signed-off-by:
Douglas Anderson <dianders@chromium.org> Reviewed-by:
Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by:
Abhinav Kumar <quic_abhinavk@quicinc.com> Patchwork: https://patchwork.freedesktop.org/patch/496318/ Link: https://lore.kernel.org/r/20220804073608.v4.1.I1056ee3f77f71287f333279efe4c85f88d403f65@changeid Signed-off-by:
Abhinav Kumar <quic_abhinavk@quicinc.com> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
sunliming authored
[ Upstream commit 2f25a1fb ] Fix the inconsistent indenting in function msm_dsi_dphy_timing_calc_v3(). Fix the following smatch warnings: drivers/gpu/drm/msm/dsi/phy/dsi_phy.c:350 msm_dsi_dphy_timing_calc_v3() warn: inconsistent indenting Fixes: f1fa7ff4 ("drm/msm/dsi: implement auto PHY timing calculator for 10nm PHY") Reported-by:
kernel test robot <lkp@intel.com> Signed-off-by:
sunliming <sunliming@kylinos.cn> Reviewed-by:
Abhinav Kumar <quic_abhinavk@quicinc.com> Patchwork: https://patchwork.freedesktop.org/patch/494662/ Link: https://lore.kernel.org/r/20220719015622.646718-1-sunliming@kylinos.cn Signed-off-by:
Abhinav Kumar <quic_abhinavk@quicinc.com> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Enguerrand de Ribaucourt authored
commit c96614ee upstream. When unplugging an Ethernet cable, false carrier events were produced by the PHY at a very high rate. Once the false carrier counter full, an interrupt was triggered every few clock cycles until the cable was replugged. This resulted in approximately 10k/s interrupts. Since the false carrier counter (FCSCR) is never used, we can safely disable this interrupt. In addition to improving performance, this also solved MDIO read timeouts I was randomly encountering with an i.MX8 fec MAC because of the interrupt flood. The interrupt count and MDIO timeout fix were tested on a v5.4.110 kernel. Fixes: 87461f7a ("net: phy: DP83822 initial driver submission") Signed-off-by:
Enguerrand de Ribaucourt <enguerrand.de-ribaucourt@savoirfairelinux.com> Reviewed-by:
Andrew Lunn <andrew@lunn.ch> Signed-off-by:
Jakub Kicinski <kuba@kernel.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Yee Lee authored
This reverts commit 23c2d497. Commit 23c2d497 ("mm: kmemleak: take a full lowmem check in kmemleak_*_phys()") brought false leak alarms on some archs like arm64 that does not init pfn boundary in early booting. The final solution lands on linux-6.0: commit 0c24e061 ("mm: kmemleak: add rbtree and store physical address for objects allocated with PA"). Revert this commit before linux-6.0. The original issue of invalid PA can be mitigated by additional check in devicetree. The false alarm report is as following: Kmemleak output: (Qemu/arm64) unreferenced object 0xffff0000c0170a00 (size 128): comm "swapper/0", pid 1, jiffies 4294892404 (age 126.208s) hex dump (first 32 bytes): 62 61 73 65 00 00 00 00 00 00 00 00 00 00 00 00 base............ 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: [<(____ptrval____)>] __kmalloc_track_caller+0x1b0/0x2e4 [<(____ptrval____)>] kstrdup_const+0x8c/0xc4 [<(____ptrval____)>] kvasprintf_const+0xbc/0xec [<(____ptrval____)>] kobject_set_name_vargs+0x58/0xe4 [<(____ptrval____)>] kobject_add+0x84/0x100 [<(____ptrval____)>] __of_attach_node_sysfs+0x78/0xec [<(____ptrval____)>] of_core_init+0x68/0x104 [<(____ptrval____)>] driver_init+0x28/0x48 [<(____ptrval____)>] do_basic_setup+0x14/0x28 [<(____ptrval____)>] kernel_init_freeable+0x110/0x178 [<(____ptrval____)>] kernel_init+0x20/0x1a0 [<(____ptrval____)>] ret_from_fork+0x10/0x20 This pacth is also applicable to linux-5.17.y/linux-5.18.y/linux-5.19.y Cc: <stable@vger.kernel.org> Signed-off-by:
Yee Lee <yee.lee@mediatek.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Linus Torvalds authored
commit 2f79cdfe upstream. Commit d4252071 ("add barriers to buffer_uptodate and set_buffer_uptodate") added proper memory barriers to the buffer head BH_Uptodate bit, so that anybody who tests a buffer for being up-to-date will be guaranteed to actually see initialized state. However, that commit didn't _just_ add the memory barrier, it also ended up dropping the "was it already set" logic that the BUFFER_FNS() macro had. That's conceptually the right thing for a generic "this is a memory barrier" operation, but in the case of the buffer contents, we really only care about the memory barrier for the _first_ time we set the bit, in that the only memory ordering protection we need is to avoid anybody seeing uninitialized memory contents. Any other access ordering wouldn't be about the BH_Uptodate bit anyway, and would require some other proper lock (typically BH_Lock or the folio lock). A reader that races with somebody invalidating the buffer head isn't an issue wrt the memory ordering, it's a serialization issue. Now, you'd think that the buffer head operations don't matter in this day and age (and I certainly thought so), but apparently some loads still end up being heavy users of buffer heads. In particular, the kernel test robot reported that not having this bit access optimization in place caused a noticeable direct IO performance regression on ext4: fxmark.ssd_ext4_no_jnl_DWTL_54_directio.works/sec -26.5% regression although you presumably need a fast disk and a lot of cores to actually notice. Link: https://lore.kernel.org/all/Yw8L7HTZ%2FdE2%2Fo9C@xsang-OptiPlex-9020/ Reported-by:
kernel test robot <oliver.sang@intel.com> Tested-by:
Fengwei Yin <fengwei.yin@intel.com> Cc: Mikulas Patocka <mpatocka@redhat.com> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: stable@kernel.org Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Greg Kroah-Hartman authored
commit fe2c9c61 upstream. When calling debugfs_lookup() the result must have dput() called on it, otherwise the memory will leak over time. Fix this up to be much simpler logic and only create the root debugfs directory once when the driver is first accessed. That resolves the memory leak and makes things more obvious as to what the intent is. Cc: Marcin Wojtas <mw@semihalf.com> Cc: Russell King <linux@armlinux.org.uk> Cc: "David S. Miller" <davem@davemloft.net> Cc: Eric Dumazet <edumazet@google.com> Cc: Jakub Kicinski <kuba@kernel.org> Cc: Paolo Abeni <pabeni@redhat.com> Cc: netdev@vger.kernel.org Cc: stable <stable@kernel.org> Fixes: 21da57a2 ("net: mvpp2: add a debugfs interface for the Header Parser") Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Stanislaw Gruszka authored
commit 6d0ef724 upstream. This reverts commit a8eb8e6f as it can cause invalid link quality command sent to the firmware and address the off-by-one issue by fixing condition of while loop. Cc: stable@vger.kernel.org Fixes: a8eb8e6f ("wifi: iwlegacy: 4965: fix potential off-by-one overflow in il4965_rs_fill_link_cmd()") Signed-off-by:
Stanislaw Gruszka <stf_xl@wp.pl> Signed-off-by:
Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20220815073737.GA999388@wp.pl Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Hyunwoo Kim authored
commit 9cb636b5 upstream. A race condition may occur if the user calls close() on another thread during a write() operation on the device node of the efi capsule. This is a race condition that occurs between the efi_capsule_write() and efi_capsule_flush() functions of efi_capsule_fops, which ultimately results in UAF. So, the page freeing process is modified to be done in efi_capsule_release() instead of efi_capsule_flush(). Cc: <stable@vger.kernel.org> # v4.9+ Signed-off-by:
Hyunwoo Kim <imv4bel@gmail.com> Link: https://lore.kernel.org/all/20220907102920.GA88602@ubuntu/ Signed-off-by:
Ard Biesheuvel <ardb@kernel.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
- Sep 05, 2022
-
-
Greg Kroah-Hartman authored
Link: https://lore.kernel.org/r/20220902121403.569927325@linuxfoundation.org Tested-by:
Jon Hunter <jonathanh@nvidia.com> Tested-by:
Florian Fainelli <f.fainelli@gmail.com> Tested-by:
Shuah Khan <skhan@linuxfoundation.org> Tested-by:
Guenter Roeck <linux@roeck-us.net> Tested-by:
Sudip Mukherjee <sudip.mukherjee@codethink.co.uk> Tested-by:
Linux Kernel Functional Testing <lkft@linaro.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Yang Yingliang authored
commit d5485d9d upstream. It is not allowed to call kfree_skb() from hardware interrupt context or with interrupts being disabled. So add all skb to a tmp list, then free them after spin_unlock_irqrestore() at once. Fixes: 66ba215c ("neigh: fix possible DoS due to net iface start/stop loop") Suggested-by:
Denis V. Lunev <den@openvz.org> Signed-off-by:
Yang Yingliang <yangyingliang@huawei.com> Reviewed-by:
Nikolay Aleksandrov <razor@blackwall.org> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Zhengchao Shao authored
commit dc633700 upstream. User can use AF_PACKET socket to send packets with the length of 0. When min_header_len equals to 0, packet_snd will call __dev_queue_xmit to send packets, and sock->type can be any type. Reported-by:
<syzbot+5ea725c25d06fb9114c4@syzkaller.appspotmail.com> Fixes: fd189422 ("bpf: Don't redirect packets with invalid pkt_len") Signed-off-by:
Zhengchao Shao <shaozhengchao@huawei.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Pavel Begunkov authored
Older kernels lack io_uring POLLFREE handling. As only affected files are signalfd and android binder the safest option would be to disable polling those files via io_uring and hope there are no users. Fixes: 221c5eb2 ("io_uring: add support for IORING_OP_POLL") Signed-off-by:
Pavel Begunkov <asml.silence@gmail.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Kuniyuki Iwashima authored
commit 9c80e799 upstream. The assumption in __disable_kprobe() is wrong, and it could try to disarm an already disarmed kprobe and fire the WARN_ONCE() below. [0] We can easily reproduce this issue. 1. Write 0 to /sys/kernel/debug/kprobes/enabled. # echo 0 > /sys/kernel/debug/kprobes/enabled 2. Run execsnoop. At this time, one kprobe is disabled. # /usr/share/bcc/tools/execsnoop & [1] 2460 PCOMM PID PPID RET ARGS # cat /sys/kernel/debug/kprobes/list ffffffff91345650 r __x64_sys_execve+0x0 [FTRACE] ffffffff91345650 k __x64_sys_execve+0x0 [DISABLED][FTRACE] 3. Write 1 to /sys/kernel/debug/kprobes/enabled, which changes kprobes_all_disarmed to false but does not arm the disabled kprobe. # echo 1 > /sys/kernel/debug/kprobes/enabled # cat /sys/kernel/debug/kprobes/list ffffffff91345650 r __x64_sys_execve+0x0 [FTRACE] ffffffff91345650 k __x64_sys_execve+0x0 [DISABLED][FTRACE] 4. Kill execsnoop, when __disable_kprobe() calls disarm_kprobe() for the disabled kprobe and hits the WARN_ONCE() in __disarm_kprobe_ftrace(). # fg /usr/share/bcc/tools/execsnoop ^C Actually, WARN_ONCE() is fired twice, and __unregister_kprobe_top() misses some cleanups and leaves the aggregated kprobe in the hash table. Then, __unregister_trace_kprobe() initialises tk->rp.kp.list and creates an infinite loop like this. aggregated kprobe.list -> kprobe.list -. ^ | '.__.' In this situation, these commands fall into the infinite loop and result in RCU stall or soft lockup. cat /sys/kernel/debug/kprobes/list : show_kprobe_addr() enters into the infinite loop with RCU. /usr/share/bcc/tools/execsnoop : warn_kprobe_rereg() holds kprobe_mutex, and __get_valid_kprobe() is stuck in the loop. To avoid the issue, make sure we don't call disarm_kprobe() for disabled kprobes. [0] Failed to disarm kprobe-ftrace at __x64_sys_execve+0x0/0x40 (error -2) WARNING: CPU: 6 PID: 2460 at kernel/kprobes.c:1130 __disarm_kprobe_ftrace.isra.19 (kernel/kprobes.c:1129) Modules linked in: ena CPU: 6 PID: 2460 Comm: execsnoop Not tainted 5.19.0+ #28 Hardware name: Amazon EC2 c5.2xlarge/, BIOS 1.0 10/16/2017 RIP: 0010:__disarm_kprobe_ftrace.isra.19 (kernel/kprobes.c:1129) Code: 24 8b 02 eb c1 80 3d c4 83 f2 01 00 75 d4 48 8b 75 00 89 c2 48 c7 c7 90 fa 0f 92 89 04 24 c6 05 ab 83 01 e8 e4 94 f0 ff <0f> 0b 8b 04 24 eb b1 89 c6 48 c7 c7 60 fa 0f 92 89 04 24 e8 cc 94 RSP: 0018:ffff9e6ec154bd98 EFLAGS: 00010282 RAX: 0000000000000000 RBX: ffffffff930f7b00 RCX: 0000000000000001 RDX: 0000000080000001 RSI: ffffffff921461c5 RDI: 00000000ffffffff RBP: ffff89c504286da8 R08: 0000000000000000 R09: c0000000fffeffff R10: 0000000000000000 R11: ffff9e6ec154bc28 R12: ffff89c502394e40 R13: ffff89c502394c00 R14: ffff9e6ec154bc00 R15: 0000000000000000 FS: 00007fe800398740(0000) GS:ffff89c812d80000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000000c00057f010 CR3: 0000000103b54006 CR4: 00000000007706e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 PKRU: 55555554 Call Trace: <TASK> __disable_kprobe (kernel/kprobes.c:1716) disable_kprobe (kernel/kprobes.c:2392) __disable_trace_kprobe (kernel/trace/trace_kprobe.c:340) disable_trace_kprobe (kernel/trace/trace_kprobe.c:429) perf_trace_event_unreg.isra.2 (./include/linux/tracepoint.h:93 kernel/trace/trace_event_perf.c:168) perf_kprobe_destroy (kernel/trace/trace_event_perf.c:295) _free_event (kernel/events/core.c:4971) perf_event_release_kernel (kernel/events/core.c:5176) perf_release (kernel/events/core.c:5186) __fput (fs/file_table.c:321) task_work_run (./include/linux/sched.h:2056 (discriminator 1) kernel/task_work.c:179 (discriminator 1)) exit_to_user_mode_prepare (./include/linux/resume_user_mode.h:49 kernel/entry/common.c:169 kernel/entry/common.c:201) syscall_exit_to_user_mode (./arch/x86/include/asm/jump_label.h:55 ./arch/x86/include/asm/nospec-branch.h:384 ./arch/x86/include/asm/entry-common.h:94 kernel/entry/common.c:133 kernel/entry/common.c:296) do_syscall_64 (arch/x86/entry/common.c:87) entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:120) RIP: 0033:0x7fe7ff210654 Code: 15 79 89 20 00 f7 d8 64 89 02 48 c7 c0 ff ff ff ff eb be 0f 1f 00 8b 05 9a cd 20 00 48 63 ff 85 c0 75 11 b8 03 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 3a f3 c3 48 83 ec 18 48 89 7c 24 08 e8 34 fc RSP: 002b:00007ffdbd1d3538 EFLAGS: 00000246 ORIG_RAX: 0000000000000003 RAX: 0000000000000000 RBX: 0000000000000008 RCX: 00007fe7ff210654 RDX: 0000000000000000 RSI: 0000000000002401 RDI: 0000000000000008 RBP: 0000000000000000 R08: 94ae31d6fda838a4 R0900007fe8001c9d30 R10: 00007ffdbd1d34b0 R11: 0000000000000246 R12: 00007ffdbd1d3600 R13: 0000000000000000 R14: fffffffffffffffc R15: 00007ffdbd1d3560 </TASK> Link: https://lkml.kernel.org/r/20220813020509.90805-1-kuniyu@amazon.com Fixes: 69d54b91 ("kprobes: makes kprobes/enabled works correctly for optimized kprobes.") Signed-off-by:
Kuniyuki Iwashima <kuniyu@amazon.com> Reported-by:
Ayushman Dutta <ayudutta@amazon.com> Cc: "Naveen N. Rao" <naveen.n.rao@linux.ibm.com> Cc: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Cc: Kuniyuki Iwashima <kuniyu@amazon.com> Cc: Kuniyuki Iwashima <kuni1840@gmail.com> Cc: Ayushman Dutta <ayudutta@amazon.com> Cc: <stable@vger.kernel.org> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Andrei Vagin authored
[ Upstream commit c966533f ] Performance numbers for Intel(R) Core(TM) i5-6300U CPU @ 2.40GHz (more clock_gettime() cycles - the better): clock | before | after | diff ---------------------------------------------------------- monotonic | 153222105 | 166775025 | 8.8% monotonic-coarse | 671557054 | 691513017 | 3.0% monotonic-raw | 147116067 | 161057395 | 9.5% boottime | 153446224 | 166962668 | 9.1% The improvement for arm64 for monotonic and boottime is around 3.5%. clock | before | after | diff ================================================== monotonic 17326692 17951770 3.6% monotonic-coarse 43624027 44215292 1.3% monotonic-raw 17541809 17554932 0.1% boottime 17334982 17954361 3.5% [ tglx: Avoid the goto ] Signed-off-by:
Andrei Vagin <avagin@gmail.com> Signed-off-by:
Dmitry Safonov <dima@arista.com> Signed-off-by:
Thomas Gleixner <tglx@linutronix.de> Link: https://lore.kernel.org/r/20191112012724.250792-3-dima@arista.com Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Christophe Leroy authored
[ Upstream commit 8463cf80 ] do_coarse() is similar to do_hres() except that it never fails. Change its type to int instead of void and let it always return success (0) to simplify the call site. Signed-off-by:
Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by:
Thomas Gleixner <tglx@linutronix.de> Link: https://lore.kernel.org/r/21e8afa38c02ca8672c2690307383507fe63b454.1577111367.git.christophe.leroy@c-s.fr Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Josef Bacik authored
[ Upstream commit 899b7f69 ] We're seeing a weird problem in production where we have overlapping extent items in the extent tree. It's unclear where these are coming from, and in debugging we realized there's no check in the tree checker for this sort of problem. Add a check to the tree-checker to make sure that the extents do not overlap each other. Reviewed-by:
Qu Wenruo <wqu@suse.com> Signed-off-by:
Josef Bacik <josef@toxicpanda.com> Reviewed-by:
David Sterba <dsterba@suse.com> Signed-off-by:
David Sterba <dsterba@suse.com> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Geert Uytterhoeven authored
[ Upstream commit aa5762c3 ] NF_CONNTRACK_PROCFS was marked obsolete in commit 54b07dca ("netfilter: provide config option to disable ancient procfs parts") in v3.3. Signed-off-by:
Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by:
Florian Westphal <fw@strlen.de> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Ilya Bakoulin authored
[ Upstream commit 04fb918b ] [Why] Some pixel clock values could cause HDMI TMDS SSCPs to be misaligned between different HDMI lanes when using YCbCr420 10-bit pixel format. BIOS functions for transmitter/encoder control take pixel clock in kHz increments, whereas the function for setting the pixel clock is in 100Hz increments. Setting pixel clock to a value that is not on a kHz boundary will cause the issue. [How] Round pixel clock down to nearest kHz in 10/12-bpc cases. Reviewed-by:
Aric Cyr <Aric.Cyr@amd.com> Acked-by:
Brian Chang <Brian.Chang@amd.com> Signed-off-by:
Ilya Bakoulin <Ilya.Bakoulin@amd.com> Tested-by:
Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by:
Alex Deucher <alexander.deucher@amd.com> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-