- Oct 27, 2021
-
-
Peng Li authored
[ Upstream commit 0dd8a25f ] HNS3 driver includes hns3.ko, hnae3.ko and hclge.ko. hns3.ko includes network stack and pci_driver, hclge.ko includes HW device action, algo_ops and timer task, hnae3.ko includes some register function. When SRIOV is enable and hclge.ko is removed, HW device is unloaded but VF still exists, PF will not reply VF mbx messages, and cause errors. This patch fix it by disable SRIOV before remove hclge.ko. Fixes: e2cb1dec ("net: hns3: Add HNS3 VF HCL(Hardware Compatibility Layer) Support") Signed-off-by:
Peng Li <lipeng321@huawei.com> Signed-off-by:
Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Guangbin Huang authored
[ Upstream commit 731797fd ] If ets dwrr bandwidth of tc is set to 0, the hardware will switch to SP mode. In this case, this tc may occupy all the tx bandwidth if it has huge traffic, so it violates the purpose of the user setting. To fix this problem, limit the ets dwrr bandwidth must greater than 0. Fixes: cacde272 ("net: hns3: Add hclge_dcb module for the support of DCB feature") Signed-off-by:
Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Randy Dunlap authored
[ Upstream commit 4cce60f1 ] Both arch/nios2/ and drivers/mmc/host/tmio_mmc.c define a macro with the name "CTL_STATUS". Change the one in arch/nios2/ to be "CTL_FSTATUS" (flags status) to eliminate the build warning. In file included from ../drivers/mmc/host/tmio_mmc.c:22: drivers/mmc/host/tmio_mmc.h:31: warning: "CTL_STATUS" redefined 31 | #define CTL_STATUS 0x1c arch/nios2/include/asm/registers.h:14: note: this is the location of the previous definition 14 | #define CTL_STATUS 0 Fixes: b31ebd80 ("nios2: Nios2 registers") Signed-off-by:
Randy Dunlap <rdunlap@infradead.org> Cc: Dinh Nguyen <dinguyen@kernel.org> Signed-off-by:
Dinh Nguyen <dinguyen@kernel.org> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Vegard Nossum authored
[ Upstream commit 46393d61 ] Fix the following build/link error by adding a dependency on the CRC32 routines: ld: drivers/net/usb/lan78xx.o: in function `lan78xx_set_multicast': lan78xx.c:(.text+0x48cf): undefined reference to `crc32_le' The actual use of crc32_le() comes indirectly through ether_crc(). Fixes: 55d7de9d ("Microchip's LAN7800 family USB 2/3 to 10/100/1000 Ethernet device driver") Signed-off-by:
Vegard Nossum <vegard.nossum@oracle.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Antoine Tenart authored
[ Upstream commit 174c3762 ] Because the data pointer of net/ipv4/vs/debug_level is not updated per netns, it must be marked as read-only in non-init netns. Fixes: c6d2d445 ("IPVS: netns, final patch enabling network name space.") Signed-off-by:
Antoine Tenart <atenart@kernel.org> Acked-by:
Julian Anastasov <ja@ssi.bg> Signed-off-by:
Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Shengjiu Wang authored
[ Upstream commit 6b9b546d ] There is a noise issue for 8kHz sample rate on slave mode. Compared with master mode, the difference is the DACDIV setting, after correcting the DACDIV, the noise is gone. There is no noise issue for 48kHz sample rate, because the default value of DACDIV is correct for 48kHz. So wm8960_configure_clocking() should be functional for ADC and DAC function even if it is slave mode. In order to be compatible for old use case, just add condition for checking that sysclk is zero with slave mode. Fixes: 0e50b51a ("ASoC: wm8960: Let wm8960 driver configure its bit clock and frame clock") Signed-off-by:
Shengjiu Wang <shengjiu.wang@nxp.com> Acked-by:
Charles Keepax <ckeepax@opensource.cirrus.com> Link: https://lore.kernel.org/r/1634102224-3922-1-git-send-email-shengjiu.wang@nxp.com Signed-off-by:
Mark Brown <broonie@kernel.org> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Gerald Schaefer authored
[ Upstream commit 293d92cb ] The following warning occurred sporadically on s390: DMA-API: nvme 0006:00:00.0: device driver maps memory from kernel text or rodata [addr=0000000048cc5e2f] [len=131072] WARNING: CPU: 4 PID: 825 at kernel/dma/debug.c:1083 check_for_illegal_area+0xa8/0x138 It is a false-positive warning, due to broken logic in debug_dma_map_sg(). check_for_illegal_area() checks for overlay of sg elements with kernel text or rodata. It is called with sg_dma_len(s) instead of s->length as parameter. After the call to ->map_sg(), sg_dma_len() will contain the length of possibly combined sg elements in the DMA address space, and not the individual sg element length, which would be s->length. The check will then use the physical start address of an sg element, and add the DMA length for the overlap check, which could result in the false warning, because the DMA length can be larger than the actual single sg element length. In addition, the call to check_for_illegal_area() happens in the iteration over mapped_ents, which will not include all individual sg elements if any of them were combined in ->map_sg(). Fix this by using s->length instead of sg_dma_len(s). Also put the call to check_for_illegal_area() in a separate loop, iterating over all the individual sg elements ("nents" instead of "mapped_ents"). While at it, as suggested by Robin Murphy, also move check_for_stack() inside the new loop, as it is similarly concerned with validating the individual sg elements. Link: https://lore.kernel.org/lkml/20210705185252.4074653-1-gerald.schaefer@linux.ibm.com Fixes: 884d0597 ("dma-debug: use sg_dma_len accessor") Signed-off-by:
Gerald Schaefer <gerald.schaefer@linux.ibm.com> Signed-off-by:
Christoph Hellwig <hch@lst.de> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Benjamin Coddington authored
[ Upstream commit c2010694 ] If nfsd has existing listening sockets without any processes, then an error returned from svc_create_xprt() for an additional transport will remove those existing listeners. We're seeing this in practice when userspace attempts to create rpcrdma transports without having the rpcrdma modules present before creating nfsd kernel processes. Fix this by checking for existing sockets before calling nfsd_destroy(). Signed-off-by:
Benjamin Coddington <bcodding@redhat.com> Signed-off-by:
Chuck Lever <chuck.lever@oracle.com> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Guenter Roeck authored
[ Upstream commit 012e9745 ] Rebooting xtensa images loaded with the '-kernel' option in qemu does not work. When executing a reboot command, the qemu session either hangs or experiences an endless sequence of error messages. Kernel panic - not syncing: Unrecoverable error in exception handler Reset code jumps to the CPU restart address, but Linux can not recover from there because code and data in the kernel init sections have been discarded and overwritten at this point. XTFPGA platforms have a means to reset the CPU by writing 0xdead into a specific FPGA IO address. When used in QEMU the kernel image loaded with the '-kernel' option gets restored to its original state allowing the machine to boot successfully. Use that mechanism to attempt a platform reset. If it does not work, fall back to the existing mechanism. Signed-off-by:
Guenter Roeck <linux@roeck-us.net> Signed-off-by:
Max Filippov <jcmvbkbc@gmail.com> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Max Filippov authored
[ Upstream commit f3d7c2cd ] Use platform data to initialize xtfpga device drivers when CONFIG_USE_OF is not selected. This fixes xtfpga networking when CONFIG_USE_OF is not selected but CONFIG_OF is. Signed-off-by:
Max Filippov <jcmvbkbc@gmail.com> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Eugen Hristev authored
[ Upstream commit 4348cc10 ] Without a sensor node, the ISC will simply fail to probe, as the corresponding port node is missing. It is then logical to disable the node in the devicetree. If we add a port with a connection to a sensor endpoint, ISC can be enabled. Signed-off-by:
Eugen Hristev <eugen.hristev@microchip.com> Signed-off-by:
Nicolas Ferre <nicolas.ferre@microchip.com> Link: https://lore.kernel.org/r/20210902121358.503589-1-eugen.hristev@microchip.com Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
- Oct 20, 2021
-
-
Greg Kroah-Hartman authored
Link: https://lore.kernel.org/r/20211018132326.529486647@linuxfoundation.org Tested-by:
Shuah Khan <skhan@linuxfoundation.org> Link: https://lore.kernel.org/r/20211018143033.725101193@linuxfoundation.org Tested-by:
Pavel Machek (CIP) <pavel@denx.de> Tested-by:
Shuah Khan <skhan@linuxfoundation.org> Tested-by:
Jon Hunter <jonathanh@nvidia.com> Tested-by:
Hulk Robot <hulkrobot@huawei.com> Tested-by:
Linux Kernel Functional Testing <lkft@linaro.org> Tested-by:
Sudip Mukherjee <sudip.mukherjee@codethink.co.uk> Tested-by:
Guenter Roeck <linux@roeck-us.net> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Vegard Nossum authored
commit 9973a430 upstream. Fix the following build/link errors by adding a dependency on CRYPTO, CRYPTO_HASH, CRYPTO_SHA256 and CRC32: ld: drivers/net/usb/r8152.o: in function `rtl8152_fw_verify_checksum': r8152.c:(.text+0x2b2a): undefined reference to `crypto_alloc_shash' ld: r8152.c:(.text+0x2bed): undefined reference to `crypto_shash_digest' ld: r8152.c:(.text+0x2c50): undefined reference to `crypto_destroy_tfm' ld: drivers/net/usb/r8152.o: in function `_rtl8152_set_rx_mode': r8152.c:(.text+0xdcb0): undefined reference to `crc32_le' Fixes: 9370f2d0 ("r8152: support request_firmware for RTL8153") Fixes: ac718b69 ("net/usb: new driver for RTL8152") Signed-off-by:
Vegard Nossum <vegard.nossum@oracle.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
chongjiapeng authored
commit a5a14ea7 upstream. The error code is missing in this code scenario, add the error code '-EINVAL' to the return value 'rc'. Eliminate the follow smatch warning: drivers/net/ethernet/qlogic/qed/qed_main.c:1298 qed_slowpath_start() warn: missing error code 'rc'. Reported-by:
Abaci Robot <abaci@linux.alibaba.com> Fixes: d51e4af5 ("qed: aRFS infrastructure support") Signed-off-by:
chongjiapeng <jiapeng.chong@linux.alibaba.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Sebastian Andrzej Siewior authored
commit 14132690 upstream. Introduction of lockless subqueues broke the class statistics. Before the change stats were accumulated in `bstats' and `qstats' on the stack which was then copied to struct gnet_dump. After the change the `bstats' and `qstats' are initialized to 0 and never updated, yet still fed to gnet_dump. The code updates the global qdisc->cpu_bstats and qdisc->cpu_qstats instead, clobbering them. Most likely a copy-paste error from the code in mqprio_dump(). __gnet_stats_copy_basic() and __gnet_stats_copy_queue() accumulate the values for per-CPU case but for global stats they overwrite the value, so only stats from the last loop iteration / tc end up in sch->[bq]stats. Use the on-stack [bq]stats variables again and add the stats manually in the global case. Fixes: ce679e8d ("net: sched: add support for TCQ_F_NOLOCK subqueues to sch_mqprio") Cc: John Fastabend <john.fastabend@gmail.com> Signed-off-by:
Sebastian Andrzej Siewior <bigeasy@linutronix.de> https://lore.kernel.org/all/20211007175000.2334713-2-bigeasy@linutronix.de/ Signed-off-by:
Jakub Kicinski <kuba@kernel.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Jackie Liu authored
commit 596143e3 upstream. Fix modpost Section mismatch error in next_platform_timer(). [...] WARNING: modpost: vmlinux.o(.text.unlikely+0x26e60): Section mismatch in reference from the function next_platform_timer() to the variable .init.data:acpi_gtdt_desc The function next_platform_timer() references the variable __initdata acpi_gtdt_desc. This is often because next_platform_timer lacks a __initdata annotation or the annotation of acpi_gtdt_desc is wrong. WARNING: modpost: vmlinux.o(.text.unlikely+0x26e64): Section mismatch in reference from the function next_platform_timer() to the variable .init.data:acpi_gtdt_desc The function next_platform_timer() references the variable __initdata acpi_gtdt_desc. This is often because next_platform_timer lacks a __initdata annotation or the annotation of acpi_gtdt_desc is wrong. ERROR: modpost: Section mismatches detected. Set CONFIG_SECTION_MISMATCH_WARN_ONLY=y to allow them. make[1]: *** [scripts/Makefile.modpost:59: vmlinux.symvers] Error 1 make[1]: *** Deleting file 'vmlinux.symvers' make: *** [Makefile:1176: vmlinux] Error 2 [...] Fixes: a712c3ed ("acpi/arm64: Add memory-mapped timer support in GTDT driver") Signed-off-by:
Jackie Liu <liuyun01@kylinos.cn> Acked-by:
Hanjun Guo <guohanjun@huawei.com> Link: https://lore.kernel.org/r/20210823092526.2407526-1-liu.yun@linux.dev Signed-off-by:
Catalin Marinas <catalin.marinas@arm.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Dan Carpenter authored
commit c8f01ffc upstream. This disables a lock which wasn't enabled and it does not disable the first lock in the array. Fixes: 6e0eb52e ("drm/msm/dsi: Parse bus clocks from a list") Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by:
Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20211001123409.GG2283@kili Signed-off-by:
Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by:
Rob Clark <robdclark@chromium.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Dan Carpenter authored
commit 739b4e77 upstream. Return an error code if msm_dsi_manager_validate_current_config(). Don't return success. Fixes: 8b03ad30 ("drm/msm/dsi: Use one connector for dual DSI mode") Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by:
Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20211001123308.GF2283@kili Signed-off-by:
Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by:
Rob Clark <robdclark@chromium.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Colin Ian King authored
commit 2133c4fc upstream. The initialization of pointer dev dereferences pointer edp before edp is null checked, so there is a potential null pointer deference issue. Fix this by only dereferencing edp after edp has been null checked. Addresses-Coverity: ("Dereference before null check") Fixes: ab5b0107 ("drm/msm: Initial add eDP support in msm drm driver (v5)") Signed-off-by:
Colin Ian King <colin.king@canonical.com> Reviewed-by:
Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20210929121857.213922-1-colin.king@canonical.com Signed-off-by:
Rob Clark <robdclark@chromium.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Vadim Pasternak authored
commit 9b024201 upstream. Change kstrtou32() argument 'base' to be zero instead of 'len'. It works by chance for setting one bit value, but it is not supposed to work in case value passed to mlxreg_io_attr_store() is greater than 1. It works for example, for: echo 1 > /sys/devices/platform/mlxplat/mlxreg-io/hwmon/.../jtag_enable But it will fail for: echo n > /sys/devices/platform/mlxplat/mlxreg-io/hwmon/.../jtag_enable, where n > 1. The flow for input buffer conversion is as below: _kstrtoull(const char *s, unsigned int base, unsigned long long *res) calls: rv = _parse_integer(s, base, &_res); For the second case, where n > 1: - _parse_integer() converts 's' to 'val'. For n=2, 'len' is set to 2 (string buffer is 0x32 0x0a), for n=3 'len' is set to 3 (string buffer 0x33 0x0a), etcetera. - 'base' is equal or greater then '2' (length of input buffer). As a result, _parse_integer() exits with result zero (rv): rv = 0; while (1) { ... if (val >= base)-> (2 >= 2) break; ... rv++; ... } And _kstrtoull() in their turn will fail: if (rv == 0) return -EINVAL; Fixes: 5ec4a8ac ("platform/mellanox: Introduce support for Mellanox register access driver") Signed-off-by:
Vadim Pasternak <vadimp@nvidia.com> Link: https://lore.kernel.org/r/20210927142214.2613929-2-vadimp@nvidia.com Signed-off-by:
Hans de Goede <hdegoede@redhat.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Dan Carpenter authored
commit 01392347 upstream. The last byte of "pad" is used without being initialized. Fixes: 55dba312 ("libata: update ->data_xfer hook for ATAPI") Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
Damien Le Moal <damien.lemoal@wdc.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Ziyang Xuan authored
commit 291c932f upstream. 'skb' is allocated in digital_in_send_sdd_req(), but not free when digital_in_send_cmd() failed, which will cause memory leak. Fix it by freeing 'skb' if digital_in_send_cmd() return failed. Fixes: 2c66daec ("NFC Digital: Add NFC-A technology support") Signed-off-by:
Ziyang Xuan <william.xuanziyang@huawei.com> Reviewed-by:
Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Signed-off-by:
Jakub Kicinski <kuba@kernel.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Ziyang Xuan authored
commit 58e7dcc9 upstream. 'params' is allocated in digital_tg_listen_mdaa(), but not free when digital_send_cmd() failed, which will cause memory leak. Fix it by freeing 'params' if digital_send_cmd() return failed. Fixes: 1c7a4c24 ("NFC Digital: Add target NFC-DEP support") Signed-off-by:
Ziyang Xuan <william.xuanziyang@huawei.com> Reviewed-by:
Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Signed-off-by:
Jakub Kicinski <kuba@kernel.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Ziyang Xuan authored
commit 0911ab31 upstream. When nfc proto id is using, nfc_proto_register() return -EBUSY error code, but forgot to unregister proto. Fix it by adding proto_unregister() in the error handling case. Fixes: c7fe3b52 ("NFC: add NFC socket family") Signed-off-by:
Ziyang Xuan <william.xuanziyang@huawei.com> Reviewed-by:
Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Link: https://lore.kernel.org/r/20211013034932.2833737-1-william.xuanziyang@huawei.com Signed-off-by:
Jakub Kicinski <kuba@kernel.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Arnd Bergmann authored
commit 40507e7a upstream. After recent cleanups, gcc started warning about a suspicious memcpy() call during the s2io_io_resume() function: In function '__dev_addr_set', inlined from 'eth_hw_addr_set' at include/linux/etherdevice.h:318:2, inlined from 's2io_set_mac_addr' at drivers/net/ethernet/neterion/s2io.c:5205:2, inlined from 's2io_io_resume' at drivers/net/ethernet/neterion/s2io.c:8569:7: arch/x86/include/asm/string_32.h:182:25: error: '__builtin_memcpy' accessing 6 bytes at offsets 0 and 2 overlaps 4 bytes at offset 2 [-Werror=restrict] 182 | #define memcpy(t, f, n) __builtin_memcpy(t, f, n) | ^~~~~~~~~~~~~~~~~~~~~~~~~ include/linux/netdevice.h:4648:9: note: in expansion of macro 'memcpy' 4648 | memcpy(dev->dev_addr, addr, len); | ^~~~~~ What apparently happened is that an old cleanup changed the calling conventions for s2io_set_mac_addr() from taking an ethernet address as a character array to taking a struct sockaddr, but one of the callers was not changed at the same time. Change it to instead call the low-level do_s2io_prog_unicast() function that still takes the old argument type. Fixes: 2fd37688 ("S2io: Added support set_mac_address driver entry point") Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Link: https://lore.kernel.org/r/20211013143613.2049096-1-arnd@kernel.org Signed-off-by:
Jakub Kicinski <kuba@kernel.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Nanyong Sun authored
commit f03dca0c upstream. devm_regmap_init may return error which caused by like out of memory, this will results in null pointer dereference later when reading or writing register: general protection fault in encx24j600_spi_probe KASAN: null-ptr-deref in range [0x0000000000000090-0x0000000000000097] CPU: 0 PID: 286 Comm: spi-encx24j600- Not tainted 5.15.0-rc2-00142-g9978db750e31-dirty #11 9c53a778c1306b1b02359f3c2bbedc0222cba652 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.13.0-1ubuntu1.1 04/01/2014 RIP: 0010:regcache_cache_bypass drivers/base/regmap/regcache.c:540 Code: 54 41 89 f4 55 53 48 89 fb 48 83 ec 08 e8 26 94 a8 fe 48 8d bb a0 00 00 00 48 b8 00 00 00 00 00 fc ff df 48 89 fa 48 c1 ea 03 <80> 3c 02 00 0f 85 4a 03 00 00 4c 8d ab b0 00 00 00 48 8b ab a0 00 RSP: 0018:ffffc900010476b8 EFLAGS: 00010207 RAX: dffffc0000000000 RBX: fffffffffffffff4 RCX: 0000000000000000 RDX: 0000000000000012 RSI: ffff888002de0000 RDI: 0000000000000094 RBP: ffff888013c9a000 R08: 0000000000000000 R09: fffffbfff3f9cc6a R10: ffffc900010476e8 R11: fffffbfff3f9cc69 R12: 0000000000000001 R13: 000000000000000a R14: ffff888013c9af54 R15: ffff888013c9ad08 FS: 00007ffa984ab580(0000) GS:ffff88801fe00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000055a6384136c8 CR3: 000000003bbe6003 CR4: 0000000000770ef0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 PKRU: 55555554 Call Trace: encx24j600_spi_probe drivers/net/ethernet/microchip/encx24j600.c:459 spi_probe drivers/spi/spi.c:397 really_probe drivers/base/dd.c:517 __driver_probe_device drivers/base/dd.c:751 driver_probe_device drivers/base/dd.c:782 __device_attach_driver drivers/base/dd.c:899 bus_for_each_drv drivers/base/bus.c:427 __device_attach drivers/base/dd.c:971 bus_probe_device drivers/base/bus.c:487 device_add drivers/base/core.c:3364 __spi_add_device drivers/spi/spi.c:599 spi_add_device drivers/spi/spi.c:641 spi_new_device drivers/spi/spi.c:717 new_device_store+0x18c/0x1f1 [spi_stub 4e02719357f1ff33f5a43d00630982840568e85e] dev_attr_store drivers/base/core.c:2074 sysfs_kf_write fs/sysfs/file.c:139 kernfs_fop_write_iter fs/kernfs/file.c:300 new_sync_write fs/read_write.c:508 (discriminator 4) vfs_write fs/read_write.c:594 ksys_write fs/read_write.c:648 do_syscall_64 arch/x86/entry/common.c:50 entry_SYSCALL_64_after_hwframe arch/x86/entry/entry_64.S:113 Add error check in devm_regmap_init_encx24j600 to avoid this situation. Fixes: 04fbfce7 ("net: Microchip encx24j600 driver") Reported-by:
Hulk Robot <hulkci@huawei.com> Signed-off-by:
Nanyong Sun <sunnanyong@huawei.com> Link: https://lore.kernel.org/r/20211012125901.3623144-1-sunnanyong@huawei.com Signed-off-by:
Jakub Kicinski <kuba@kernel.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Vegard Nossum authored
commit 427f974d upstream. Fix the following build/link error by adding a dependency on the CRC32 routines: ld: drivers/net/ethernet/korina.o: in function `korina_multicast_list': korina.c:(.text+0x1af): undefined reference to `crc32_le' Fixes: ef11291b ("Add support the Korina (IDT RC32434) Ethernet MAC") Cc: Arnd Bergmann <arnd@arndb.de> Signed-off-by:
Vegard Nossum <vegard.nossum@oracle.com> Acked-by:
Florian fainelli <f.fainelli@gmail.com> Link: https://lore.kernel.org/r/20211012152509.21771-1-vegard.nossum@oracle.com Signed-off-by:
Jakub Kicinski <kuba@kernel.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Vegard Nossum authored
commit e599ee23 upstream. Fix the following build/link error by adding a dependency on the CRC32 routines: ld: drivers/net/ethernet/arc/emac_main.o: in function `arc_emac_set_rx_mode': emac_main.c:(.text+0xb11): undefined reference to `crc32_le' The crc32_le() call comes through the ether_crc_le() call in arc_emac_set_rx_mode(). [v2: moved the select to ARC_EMAC_CORE; the Makefile is a bit confusing, but the error comes from emac_main.o, which is part of the arc_emac module, which in turn is enabled by CONFIG_ARC_EMAC_CORE. Note that arc_emac is different from emac_arc...] Fixes: 775dd682 ("arc_emac: implement promiscuous mode and multicast filtering") Cc: Arnd Bergmann <arnd@arndb.de> Signed-off-by:
Vegard Nossum <vegard.nossum@oracle.com> Link: https://lore.kernel.org/r/20211012093446.1575-1-vegard.nossum@oracle.com Signed-off-by:
Jakub Kicinski <kuba@kernel.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Eiichi Tsukata authored
commit a2d859e3 upstream. sctp_make_strreset_req() makes repeated calls to sctp_addto_chunk() which will automatically account for padding on each call. inreq and outreq are already 4 bytes aligned, but the payload is not and doing SCTP_PAD4(a + b) (which _sctp_make_chunk() did implicitly here) is different from SCTP_PAD4(a) + SCTP_PAD4(b) and not enough. It led to possible attempt to use more buffer than it was allocated and triggered a BUG_ON. Cc: Vlad Yasevich <vyasevich@gmail.com> Cc: Neil Horman <nhorman@tuxdriver.com> Cc: Greg KH <gregkh@linuxfoundation.org> Fixes: cc16f00f ("sctp: add support for generating stream reconf ssn reset request chunk") Reported-by:
Eiichi Tsukata <eiichi.tsukata@nutanix.com> Signed-off-by:
Eiichi Tsukata <eiichi.tsukata@nutanix.com> Signed-off-by:
Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by:
Marcelo Ricardo Leitner <mleitner@redhat.com> Reviewed-by:
Xin Long <lucien.xin@gmail.com> Link: https://lore.kernel.org/r/b97c1f8b0c7ff79ac4ed206fc2c49d3612e0850c.1634156849.git.mleitner@redhat.com Signed-off-by:
Jakub Kicinski <kuba@kernel.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Dan Carpenter authored
commit f7a28df7 upstream. If we have an unexpected number of channels then return -EINVAL instead of returning success. Fixes: df38a4a7 ("iio: dac: add TI DAC5571 family support") Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Link: https://lore.kernel.org/r/20210816183954.GB2068@kili Signed-off-by:
Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Dan Carpenter authored
commit 4170d3dd upstream. The ssp_print_mcu_debug() function should return negative error codes on error. Returning "length" is meaningless. This change does not affect runtime because the callers only care about zero/non-zero. Reported-by:
Jonathan Cameron <jic23@kernel.org> Fixes: 50dd64d5 ("iio: common: ssp_sensors: Add sensorhub driver") Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Link: https://lore.kernel.org/r/20210914105333.GA11657@kili Cc: <Stable@vger.kernel.org> Signed-off-by:
Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Dan Carpenter authored
commit 8167c9a3 upstream. The "idx" is validated at the start of the loop but it gets incremented during the iteration so it needs to be checked again. Fixes: 50dd64d5 ("iio: common: ssp_sensors: Add sensorhub driver") Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Link: https://lore.kernel.org/r/20210909091336.GA26312@kili Cc: <Stable@vger.kernel.org> Signed-off-by:
Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Jiri Valek - 2N authored
commit 26d90b55 upstream. Reading from sensor returned timeout error under zero light conditions. Signed-off-by:
Jiri Valek - 2N <valek@2n.cz> Fixes: ac663db3 ("iio: light: opt3001: enable operation w/o IRQ") Link: https://lore.kernel.org/r/20210920125351.6569-1-valek@2n.cz Cc: <Stable@vger.kernel.org> Signed-off-by:
Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Christophe JAILLET authored
commit bbcf4081 upstream. A successful 'regulator_enable()' call should be balanced by a corresponding 'regulator_disable()' call in the error handling path of the probe, as already done in the remove function. Update the error handling path accordingly. Fixes: 913b8646 ("iio: adc: Add TI ADC128S052") Signed-off-by:
Christophe JAILLET <christophe.jaillet@wanadoo.fr> Reviewed-by:
Alexandru Ardelean <ardeleanalex@gmail.com> Link: https://lore.kernel.org/r/85189f1cfcf6f5f7b42d8730966f2a074b07b5f5.1629542160.git.christophe.jaillet@wanadoo.fr Cc: <Stable@vger.kernel.org> Signed-off-by:
Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Billy Tsai authored
commit eb795cd9 upstream. Fix the issue when adc remove will get the null driver data. Fixed: commit 57380323 ("iio: Aspeed ADC") Signed-off-by:
Billy Tsai <billy_tsai@aspeedtech.com> Link: https://lore.kernel.org/r/20210831071458.2334-2-billy_tsai@aspeedtech.com Cc: <Stable@vger.kernel.org> Signed-off-by:
Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Borislav Petkov authored
commit 71188590 upstream. This Kconfig option was added initially so that memory encryption is enabled by default on machines which support it. However, devices which have DMA masks that are less than the bit position of the encryption bit, aka C-bit, require the use of an IOMMU or the use of SWIOTLB. If the IOMMU is disabled or in passthrough mode, the kernel would switch to SWIOTLB bounce-buffering for those transfers. In order to avoid that, 2cc13bb4 ("iommu: Disable passthrough mode when SME is active") disables the default IOMMU passthrough mode so that devices for which the default 256K DMA is insufficient, can use the IOMMU instead. However 2, there are cases where the IOMMU is disabled in the BIOS, etc. (think the usual hardware folk "oops, I dropped the ball there" cases) or a driver doesn't properly use the DMA APIs or a device has a firmware or hardware bug, e.g.: ea68573d ("drm/amdgpu: Fail to load on RAVEN if SME is active") However 3, in the above GPU use case, there are APIs like Vulkan and some OpenGL/OpenCL extensions which are under the assumption that user-allocated memory can be passed in to the kernel driver and both the GPU and CPU can do coherent and concurrent access to the same memory. That cannot work with SWIOTLB bounce buffers, of course. So, in order for those devices to function, drop the "default y" for the SME by default active option so that users who want to have SME enabled, will need to either enable it in their config or use "mem_encrypt=on" on the kernel command line. [ tlendacky: Generalize commit message. ] Fixes: 7744ccdb ("x86/mm: Add Secure Memory Encryption (SME) support") Reported-by:
Paul Menzel <pmenzel@molgen.mpg.de> Signed-off-by:
Borislav Petkov <bp@suse.de> Acked-by:
Alex Deucher <alexander.deucher@amd.com> Acked-by:
Tom Lendacky <thomas.lendacky@amd.com> Cc: <stable@vger.kernel.org> Link: https://lkml.kernel.org/r/8bbacd0e-4580-3194-19d2-a0ecad7df09c@molgen.mpg.de Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Stephen Boyd authored
commit 5d388fa0 upstream. If a cell has 'nbits' equal to a multiple of BITS_PER_BYTE the logic *p &= GENMASK((cell->nbits%BITS_PER_BYTE) - 1, 0); will become undefined behavior because nbits modulo BITS_PER_BYTE is 0, and we subtract one from that making a large number that is then shifted more than the number of bits that fit into an unsigned long. UBSAN reports this problem: UBSAN: shift-out-of-bounds in drivers/nvmem/core.c:1386:8 shift exponent 64 is too large for 64-bit type 'unsigned long' CPU: 6 PID: 7 Comm: kworker/u16:0 Not tainted 5.15.0-rc3+ #9 Hardware name: Google Lazor (rev3+) with KB Backlight (DT) Workqueue: events_unbound deferred_probe_work_func Call trace: dump_backtrace+0x0/0x170 show_stack+0x24/0x30 dump_stack_lvl+0x64/0x7c dump_stack+0x18/0x38 ubsan_epilogue+0x10/0x54 __ubsan_handle_shift_out_of_bounds+0x180/0x194 __nvmem_cell_read+0x1ec/0x21c nvmem_cell_read+0x58/0x94 nvmem_cell_read_variable_common+0x4c/0xb0 nvmem_cell_read_variable_le_u32+0x40/0x100 a6xx_gpu_init+0x170/0x2f4 adreno_bind+0x174/0x284 component_bind_all+0xf0/0x264 msm_drm_bind+0x1d8/0x7a0 try_to_bring_up_master+0x164/0x1ac __component_add+0xbc/0x13c component_add+0x20/0x2c dp_display_probe+0x340/0x384 platform_probe+0xc0/0x100 really_probe+0x110/0x304 __driver_probe_device+0xb8/0x120 driver_probe_device+0x4c/0xfc __device_attach_driver+0xb0/0x128 bus_for_each_drv+0x90/0xdc __device_attach+0xc8/0x174 device_initial_probe+0x20/0x2c bus_probe_device+0x40/0xa4 deferred_probe_work_func+0x7c/0xb8 process_one_work+0x128/0x21c process_scheduled_works+0x40/0x54 worker_thread+0x1ec/0x2a8 kthread+0x138/0x158 ret_from_fork+0x10/0x20 Fix it by making sure there are any bits to mask out. Fixes: 69aba794 ("nvmem: Add a simple NVMEM framework for consumers") Cc: Douglas Anderson <dianders@chromium.org> Cc: stable@vger.kernel.org Signed-off-by:
Stephen Boyd <swboyd@chromium.org> Signed-off-by:
Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Link: https://lore.kernel.org/r/20211013124511.18726-1-srinivas.kandagatla@linaro.org Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Halil Pasic authored
commit 2f9a174f upstream. The virtio specification virtio-v1.1-cs01 states: "Transitional devices MUST detect Legacy drivers by detecting that VIRTIO_F_VERSION_1 has not been acknowledged by the driver." This is exactly what QEMU as of 6.1 has done relying solely on VIRTIO_F_VERSION_1 for detecting that. However, the specification also says: "... the driver MAY read (but MUST NOT write) the device-specific configuration fields to check that it can support the device ..." before setting FEATURES_OK. In that case, any transitional device relying solely on VIRTIO_F_VERSION_1 for detecting legacy drivers will return data in legacy format. In particular, this implies that it is in big endian format for big endian guests. This naturally confuses the driver which expects little endian in the modern mode. It is probably a good idea to amend the spec to clarify that VIRTIO_F_VERSION_1 can only be relied on after the feature negotiation is complete. Before validate callback existed, config space was only read after FEATURES_OK. However, we already have two regressions, so let's address this here as well. The regressions affect the VIRTIO_NET_F_MTU feature of virtio-net and the VIRTIO_BLK_F_BLK_SIZE feature of virtio-blk for BE guests when virtio 1.0 is used on both sides. The latter renders virtio-blk unusable with DASD backing, because things simply don't work with the default. See Fixes tags for relevant commits. For QEMU, we can work around the issue by writing out the feature bits with VIRTIO_F_VERSION_1 bit set. We (ab)use the finalize_features config op for this. This isn't enough to address all vhost devices since these do not get the features until FEATURES_OK, however it looks like the affected devices actually never handled the endianness for legacy mode correctly, so at least that's not a regression. No devices except virtio net and virtio blk seem to be affected. Long term the right thing to do is to fix the hypervisors. Cc: <stable@vger.kernel.org> #v4.11 Signed-off-by:
Halil Pasic <pasic@linux.ibm.com> Fixes: 82e89ea0 ("virtio-blk: Add validation for block size in config space") Fixes: fe36cbe0 ("virtio_net: clear MTU when out of range") Reported-by:
<markver@us.ibm.com> Reviewed-by:
Cornelia Huck <cohuck@redhat.com> Link: https://lore.kernel.org/r/20211011053921.1198936-1-pasic@linux.ibm.com Signed-off-by:
Michael S. Tsirkin <mst@redhat.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Tomaz Solc authored
commit c184accc upstream. Adding support for Quectel EG91 LTE module. The interface layout is same as for EG95. usb-devices output: T: Bus=01 Lev=02 Prnt=02 Port=00 Cnt=01 Dev#= 3 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=2c7c ProdID=0191 Rev=03.18 S: Manufacturer=Android S: Product=Android C: #Ifs= 5 Cfg#= 1 Atr=a0 MxPwr=500mA I: If#=0x0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) I: If#=0x1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none) I: If#=0x2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none) I: If#=0x3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none) I: If#=0x4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan Interfaces: 0: Diag 1: GNSS 2: AT-command interface/modem 3: Modem 4: QMI Signed-off-by:
Tomaz Solc <tomaz.solc@tablix.org> Cc: stable@vger.kernel.org Signed-off-by:
Johan Hovold <johan@kernel.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Daniele Palmas authored
commit f5a8a07e upstream. Add the following Telit LE910Cx composition: 0x1204: tty, adb, mbim, tty, tty, tty, tty Signed-off-by:
Daniele Palmas <dnlplm@gmail.com> Link: https://lore.kernel.org/r/20211004105655.8515-1-dnlplm@gmail.com Cc: stable@vger.kernel.org Signed-off-by:
Johan Hovold <johan@kernel.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-