- Jul 28, 2021
-
-
Mark Tomlinson authored
commit b5fdf5c6 upstream. The MAX-3421 USB driver remembers the state of the USB toggles for a device/endpoint. To save SPI writes, this was only done when a new device/endpoint was being used. Unfortunately, if the old device was removed, this would cause writes to freed memory. To fix this, a simpler scheme is used. The toggles are read from hardware when a URB is completed, and the toggles are always written to hardware when any URB transaction is started. This will cause a few more SPI transactions, but no causes kernel panics. Fixes: 2d53139f ("Add support for using a MAX3421E chip as a host driver.") Cc: stable <stable@vger.kernel.org> Signed-off-by:
Mark Tomlinson <mark.tomlinson@alliedtelesis.co.nz> Link: https://lore.kernel.org/r/20210625031456.8632-1-mark.tomlinson@alliedtelesis.co.nz Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Julian Sikorski authored
commit 6abf2fe6 upstream. LaCie Rugged USB3-FW appears to be incompatible with UAS. It generates errors like: [ 1151.582598] sd 14:0:0:0: tag#16 uas_eh_abort_handler 0 uas-tag 1 inflight: IN [ 1151.582602] sd 14:0:0:0: tag#16 CDB: Report supported operation codes a3 0c 01 12 00 00 00 00 02 00 00 00 [ 1151.588594] scsi host14: uas_eh_device_reset_handler start [ 1151.710482] usb 2-4: reset SuperSpeed Gen 1 USB device number 2 using xhci_hcd [ 1151.741398] scsi host14: uas_eh_device_reset_handler success [ 1181.785534] scsi host14: uas_eh_device_reset_handler start Signed-off-by:
Julian Sikorski <belegdol+github@gmail.com> Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20210720171910.36497-1-belegdol+github@gmail.com Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Mathias Nyman authored
commit 1b7f56fb upstream. The device initiated link power management U1/U2 states should not be enabled in case the system exit latency plus one bus interval (125us) is greater than the shortest service interval of any periodic endpoint. This is the case for both U1 and U2 sytstem exit latencies and link states. See USB 3.2 section 9.4.9 "Set Feature" for more details Note, before this patch the host and device initiated U1/U2 lpm states were both enabled with lpm. After this patch it's possible to end up with only host inititated U1/U2 lpm in case the exit latencies won't allow device initiated lpm. If this case we still want to set the udev->usb3_lpm_ux_enabled flag so that sysfs users can see the link may go to U1/U2. Signed-off-by:
Mathias Nyman <mathias.nyman@linux.intel.com> Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20210715150122.1995966-2-mathias.nyman@linux.intel.com Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Nicholas Piggin authored
commit f62f3c20 upstream. The kvmppc_rtas_hcall() sets the host rtas_args.rets pointer based on the rtas_args.nargs that was provided by the guest. That guest nargs value is not range checked, so the guest can cause the host rets pointer to be pointed outside the args array. The individual rtas function handlers check the nargs and nrets values to ensure they are correct, but if they are not, the handlers store a -3 (0xfffffffd) failure indication in rets[0] which corrupts host memory. Fix this by testing up front whether the guest supplied nargs and nret would exceed the array size, and fail the hcall directly without storing a failure indication to rets[0]. Also expand on a comment about why we kill the guest and try not to return errors directly if we have a valid rets[0] pointer. Fixes: 8e591cb7 ("KVM: PPC: Book3S: Add infrastructure to implement kernel-side RTAS calls") Cc: stable@vger.kernel.org # v3.10+ Reported-by:
Alexey Kardashevskiy <aik@ozlabs.ru> Signed-off-by:
Nicholas Piggin <npiggin@gmail.com> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Mathias Nyman authored
commit 72f68bf5 upstream. There's a small window where a USB 2 remote wake may be left unhandled due to a race between hub thread and xhci port event interrupt handler. When the resume event is detected in the xhci interrupt handler it kicks the hub timer, which should move the port from resume to U0 once resume has been signalled for long enough. To keep the hub "thread" running we set a bus_state->resuming_ports flag. This flag makes sure hub timer function kicks itself. checking this flag was not properly protected by the spinlock. Flag was copied to a local variable before lock was taken. The local variable was then checked later with spinlock held. If interrupt is handled right after copying the flag to the local variable we end up stopping the hub thread before it can handle the USB 2 resume. CPU0 CPU1 (hub thread) (xhci event handler) xhci_hub_status_data() status = bus_state->resuming_ports; <Interrupt> handle_port_status() spin_lock() bus_state->resuming_ports = 1 set_flag(HCD_FLAG_POLL_RH) spin_unlock() spin_lock() if (!status) clear_flag(HCD_FLAG_POLL_RH) spin_unlock() Fix this by taking the lock a bit earlier so that it covers the resuming_ports flag copy in the hub thread Cc: <stable@vger.kernel.org> Signed-off-by:
Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20210715150651.1996099-2-mathias.nyman@linux.intel.com Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Takashi Iwai authored
commit 1c2b9519 upstream. SB16 CSP driver may hit potentially a typical ABBA deadlock in two code paths: In snd_sb_csp_stop(): spin_lock_irqsave(&p->chip->mixer_lock, flags); spin_lock(&p->chip->reg_lock); In snd_sb_csp_load(): spin_lock_irqsave(&p->chip->reg_lock, flags); spin_lock(&p->chip->mixer_lock); Also the similar pattern is seen in snd_sb_csp_start(). Although the practical impact is very small (those states aren't triggered in the same running state and this happens only on a real hardware, decades old ISA sound boards -- which must be very difficult to find nowadays), it's a real scenario and has to be fixed. This patch addresses those deadlocks by splitting the locks in snd_sb_csp_start() and snd_sb_csp_stop() for avoiding the nested locks. Reported-by:
Jia-Ju Bai <baijiaju1990@gmail.com> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/7b0fcdaf-cd4f-4728-2eae-48c151a92e10@gmail.com Link: https://lore.kernel.org/r/20210716132723.13216-1-tiwai@suse.de Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Vasily Gorbik authored
commit f8c26027 upstream. s390 enforces DYNAMIC_FTRACE if FUNCTION_TRACER is selected. At the same time implementation of ftrace_caller is not compliant with HAVE_DYNAMIC_FTRACE since it doesn't provide implementation of ftrace_update_ftrace_func() and calls ftrace_trace_function() directly. The subtle difference is that during ftrace code patching ftrace replaces function tracer via ftrace_update_ftrace_func() and activates it back afterwards. Unexpected direct calls to ftrace_trace_function() during ftrace code patching leads to nullptr-dereferences when tracing is activated for one of functions which are used during code patching. Those function currently are: copy_from_kernel_nofault() copy_from_kernel_nofault_allowed() preempt_count_sub() [with debug_defconfig] preempt_count_add() [with debug_defconfig] Corresponding KASAN report: BUG: KASAN: nullptr-dereference in function_trace_call+0x316/0x3b0 Read of size 4 at addr 0000000000001e08 by task migration/0/15 CPU: 0 PID: 15 Comm: migration/0 Tainted: G B 5.13.0-41423-g08316af3644d Hardware name: IBM 3906 M04 704 (LPAR) Stopper: multi_cpu_stop+0x0/0x3e0 <- stop_machine_cpuslocked+0x1e4/0x218 Call Trace: [<0000000001f77caa>] show_stack+0x16a/0x1d0 [<0000000001f8de42>] dump_stack+0x15a/0x1b0 [<0000000001f81d56>] print_address_description.constprop.0+0x66/0x2e0 [<000000000082b0ca>] kasan_report+0x152/0x1c0 [<00000000004cfd8e>] function_trace_call+0x316/0x3b0 [<0000000001fb7082>] ftrace_caller+0x7a/0x7e [<00000000006bb3e6>] copy_from_kernel_nofault_allowed+0x6/0x10 [<00000000006bb42e>] copy_from_kernel_nofault+0x3e/0xd0 [<000000000014605c>] ftrace_make_call+0xb4/0x1f8 [<000000000047a1b4>] ftrace_replace_code+0x134/0x1d8 [<000000000047a6e0>] ftrace_modify_all_code+0x120/0x1d0 [<000000000047a7ec>] __ftrace_modify_code+0x5c/0x78 [<000000000042395c>] multi_cpu_stop+0x224/0x3e0 [<0000000000423212>] cpu_stopper_thread+0x33a/0x5a0 [<0000000000243ff2>] smpboot_thread_fn+0x302/0x708 [<00000000002329ea>] kthread+0x342/0x408 [<00000000001066b2>] __ret_from_fork+0x92/0xf0 [<0000000001fb57fa>] ret_from_fork+0xa/0x30 The buggy address belongs to the page: page:(____ptrval____) refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x1 flags: 0x1ffff00000001000(reserved|node=0|zone=0|lastcpupid=0x1ffff) raw: 1ffff00000001000 0000040000000048 0000040000000048 0000000000000000 raw: 0000000000000000 0000000000000000 ffffffff00000001 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: 0000000000001d00: f7 f7 f7 f7 f7 f7 f7 f7 f7 f7 f7 f7 f7 f7 f7 f7 0000000000001d80: f7 f7 f7 f7 f7 f7 f7 f7 f7 f7 f7 f7 f7 f7 f7 f7 >0000000000001e00: f7 f7 f7 f7 f7 f7 f7 f7 f7 f7 f7 f7 f7 f7 f7 f7 ^ 0000000000001e80: f7 f7 f7 f7 f7 f7 f7 f7 f7 f7 f7 f7 f7 f7 f7 f7 0000000000001f00: f7 f7 f7 f7 f7 f7 f7 f7 f7 f7 f7 f7 f7 f7 f7 f7 ================================================================== To fix that introduce ftrace_func callback to be called from ftrace_caller and update it in ftrace_update_ftrace_func(). Fixes: 4cc9bed0 ("[S390] cleanup ftrace backend functions") Cc: stable@vger.kernel.org Reviewed-by:
Heiko Carstens <hca@linux.ibm.com> Signed-off-by:
Vasily Gorbik <gor@linux.ibm.com> Signed-off-by:
Heiko Carstens <hca@linux.ibm.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Huang Pei authored
This reverts commit fc5705b2 which is commit ed914d48 upstream. Commit b2b29d6d (mm: account PMD tables like PTE tables) is introduced between v5.9 and v5.10, so this fix (commit 002d8b39 ) should NOT apply to any pre-5.10 branch. Signed-off-by:
Huang Pei <huangpei@loongson.cn> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Marcelo Henrique Cerri authored
[ Upstream commit d238692b ] Use size_t when capping the count argument received by mem_rw(). Since count is size_t, using min_t(int, ...) can lead to a negative value that will later be passed to access_remote_vm(), which can cause unexpected behavior. Since we are capping the value to at maximum PAGE_SIZE, the conversion from size_t to int when passing it to access_remote_vm() as "len" shouldn't be a problem. Link: https://lkml.kernel.org/r/20210512125215.3348316-1-marcelo.cerri@canonical.com Reviewed-by:
David Disseldorp <ddiss@suse.de> Signed-off-by:
Thadeu Lima de Souza Cascardo <cascardo@canonical.com> Signed-off-by:
Marcelo Henrique Cerri <marcelo.cerri@canonical.com> Cc: Alexey Dobriyan <adobriyan@gmail.com> Cc: Souza Cascardo <cascardo@canonical.com> Cc: Christian Brauner <christian.brauner@ubuntu.com> Cc: Michel Lespinasse <walken@google.com> Cc: Helge Deller <deller@gmx.de> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Lorenzo Stoakes <lstoakes@gmail.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Vincent Palatin authored
[ Upstream commit f3a1a937 ] This reverts commit 0bd86049 . While the patch was working as stated,ie preventing the L850-GL LTE modem from crashing on some U3 wake-ups due to a race condition between the host wake-up and the modem-side wake-up, when using the MBIM interface, this would force disabling the USB runtime PM on the device. The increased power consumption is significant for LTE laptops, and given that with decently recent modem firmwares, when the modem hits the bug, it automatically recovers (ie it drops from the bus, but automatically re-enumerates after less than half a second, rather than being stuck until a power cycle as it was doing with ancient firmware), for most people, the trade-off now seems in favor of re-enabling it by default. For people with access to the platform code, the bug can also be worked-around successfully by changing the USB3 LFPM polling off-time for the XHCI controller in the BIOS code. Signed-off-by:
Vincent Palatin <vpalatin@chromium.org> Link: https://lore.kernel.org/r/20210721092516.2775971-1-vpalatin@chromium.org Fixes: 0bd86049 ("USB: quirks: ignore remote wake-up on Fibocom L850-GL LTE modem") Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Dmitry Bogdanov authored
[ Upstream commit 6d8e7e7c ] WRITE SAME(32) command handling reads WRPROTECT at the wrong offset in 1st byte instead of 10th byte. Link: https://lore.kernel.org/r/20210702091655.22818-1-d.bogdanov@yadro.com Fixes: afd73f1b ("target: Perform PROTECT sanity checks for WRITE_SAME") Signed-off-by:
Dmitry Bogdanov <d.bogdanov@yadro.com> Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Mike Christie authored
[ Upstream commit e746f345 ] A ISCSI_IFACE_PARAM can have the same value as a ISCSI_NET_PARAM so when iscsi_iface_attr_is_visible tries to figure out the type by just checking the value, we can collide and return the wrong type. When we call into the driver we might not match and return that we don't want attr visible in sysfs. The patch fixes this by setting the type when we figure out what the param is. Link: https://lore.kernel.org/r/20210701002559.89533-1-michael.christie@oracle.com Fixes: 3e0f65b3 ("[SCSI] iscsi_transport: Additional parameters for network settings") Signed-off-by:
Mike Christie <michael.christie@oracle.com> Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Nguyen Dinh Phi authored
[ Upstream commit 517a16b1 ] Commit 63346650 ("netrom: switch to sock timer API") switched to use sock timer API. It replaces mod_timer() by sk_reset_timer(), and del_timer() by sk_stop_timer(). Function sk_reset_timer() will increase the refcount of sock if it is called on an inactive timer, hence, in case the timer expires, we need to decrease the refcount ourselves in the handler, otherwise, the sock refcount will be unbalanced and the sock will never be freed. Signed-off-by:
Nguyen Dinh Phi <phind.uet@gmail.com> Reported-by:
<syzbot+10f1194569953b72f1ae@syzkaller.appspotmail.com> Fixes: 63346650 ("netrom: switch to sock timer API") Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Yajun Deng authored
[ Upstream commit 5f119ba1 ] The release_sock() is blocking function, it would change the state after sleeping. use wait_woken() instead. Fixes: 1da177e4 ("Linux-2.6.12-rc2") Signed-off-by:
Yajun Deng <yajun.deng@linux.dev> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Ziyang Xuan authored
[ Upstream commit 991e6343 ] When nr_segs equal to zero in iovec_from_user, the object msg->msg_iter.iov is uninit stack memory in caif_seqpkt_sendmsg which is defined in ___sys_sendmsg. So we cann't just judge msg->msg_iter.iov->base directlly. We can use nr_segs to judge msg in caif_seqpkt_sendmsg whether has data buffers. ===================================================== BUG: KMSAN: uninit-value in caif_seqpkt_sendmsg+0x693/0xf60 net/caif/caif_socket.c:542 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x1c9/0x220 lib/dump_stack.c:118 kmsan_report+0xf7/0x1e0 mm/kmsan/kmsan_report.c:118 __msan_warning+0x58/0xa0 mm/kmsan/kmsan_instr.c:215 caif_seqpkt_sendmsg+0x693/0xf60 net/caif/caif_socket.c:542 sock_sendmsg_nosec net/socket.c:652 [inline] sock_sendmsg net/socket.c:672 [inline] ____sys_sendmsg+0x12b6/0x1350 net/socket.c:2343 ___sys_sendmsg net/socket.c:2397 [inline] __sys_sendmmsg+0x808/0xc90 net/socket.c:2480 __compat_sys_sendmmsg net/compat.c:656 [inline] Reported-by:
<syzbot+09a5d591c1f98cf5efcb@syzkaller.appspotmail.com> Link: https://syzkaller.appspot.com/bug?id=1ace85e8fc9b0d5a45c08c2656c3e91762daa9b8 Fixes: bece7b23 ("caif: Rewritten socket implementation") Signed-off-by:
Ziyang Xuan <william.xuanziyang@huawei.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Colin Ian King authored
[ Upstream commit 91091656 ] Currently array jit->seen_reg[r1] is being accessed before the range checking of index r1. The range changing on r1 should be performed first since it will avoid any potential out-of-range accesses on the array seen_reg[] and also it is more optimal to perform checks on r1 before fetching data from the array. Fix this by swapping the order of the checks before the array access. Fixes: 05462310 ("s390/bpf: Add s390x eBPF JIT compiler backend") Signed-off-by:
Colin Ian King <colin.king@canonical.com> Signed-off-by:
Daniel Borkmann <daniel@iogearbox.net> Tested-by:
Ilya Leoshkevich <iii@linux.ibm.com> Acked-by:
Ilya Leoshkevich <iii@linux.ibm.com> Link: https://lore.kernel.org/bpf/20210715125712.24690-1-colin.king@canonical.com Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Peter Hess authored
[ Upstream commit 3a70dd2d ] In FIFO mode were two problems: - RX mode was never handled and - in this case the tx_buf pointer was NULL and caused an exception fix this by handling RX mode in mtk_spi_fifo_transfer Fixes: a568231f ("spi: mediatek: Add spi bus for Mediatek MT8173") Signed-off-by:
Peter Hess <peter.hess@ph-home.de> Signed-off-by:
Frank Wunderlich <frank-w@public-files.de> Link: https://lore.kernel.org/r/20210706121609.680534-1-linux@fw-web.de Signed-off-by:
Mark Brown <broonie@kernel.org> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Riccardo Mancini authored
[ Upstream commit e0fa7ab4 ] ASan reports some memory leaks when running: # perf test "42: BPF filter" This second leak is caused by a strlist not being dellocated on error inside probe_file__del_events. This patch adds a goto label before the deallocation and makes the error path jump to it. Signed-off-by:
Riccardo Mancini <rickyman7@gmail.com> Fixes: e7895e42 ("perf probe: Split del_perf_probe_events()") Cc: Ian Rogers <irogers@google.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lore.kernel.org/lkml/174963c587ae77fa108af794669998e4ae558338.1626343282.git.rickyman7@gmail.com Signed-off-by:
Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Riccardo Mancini authored
[ Upstream commit 937654ce ] ASan reports some memory leaks when running: # perf test "42: BPF filter" The first of these leaks is caused by obj_buf never being deallocated in __test__bpf. This patch adds the missing free. Signed-off-by:
Riccardo Mancini <rickyman7@gmail.com> Fixes: ba1fae43 ("perf test: Add 'perf test BPF'") Cc: Ian Rogers <irogers@google.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lore.kernel.org/lkml/60f3ca935fe6672e7e866276ce6264c9e26e4c87.1626343282.git.rickyman7@gmail.com [ Added missing stdlib.h include ] Signed-off-by:
Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Riccardo Mancini authored
[ Upstream commit f8cbb0f9 ] ASan reports memory leaks when running: # perf test "88: Check open filename arg using perf trace + vfs_getname" One of these is caused by the lzma stream never being closed inside lzma_decompress_to_file(). This patch adds the missing lzma_end(). Signed-off-by:
Riccardo Mancini <rickyman7@gmail.com> Fixes: 80a32e5b ("perf tools: Add lzma decompression support for kernel module") Cc: Ian Rogers <irogers@google.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lore.kernel.org/lkml/aaf50bdce7afe996cfc06e1bbb36e4a2a9b9db93.1626343282.git.rickyman7@gmail.com Signed-off-by:
Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Aleksandr Loktionov authored
[ Upstream commit 6c19d772 ] Ensure that the adapter->q_vector[MAX_Q_VECTORS] array isn't accessed beyond its size. It was fixed by using a local variable num_q_vectors as a limit for loop index, and ensure that num_q_vectors is not bigger than MAX_Q_VECTORS. Fixes: 047e0030 ("igb: add new data structure for handling interrupts and NAPI") Signed-off-by:
Aleksandr Loktionov <aleksandr.loktionov@intel.com> Reviewed-by:
Grzegorz Siwik <grzegorz.siwik@intel.com> Reviewed-by:
Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com> Reviewed-by:
Slawomir Laba <slawomirx.laba@intel.com> Reviewed-by:
Sylwester Dziedziuch <sylwesterx.dziedziuch@intel.com> Reviewed-by:
Mateusz Palczewski <mateusz.placzewski@intel.com> Tested-by:
Tony Brelinski <tonyx.brelinski@intel.com> Signed-off-by:
Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Christophe JAILLET authored
[ Upstream commit af30cbd2 ] If an error occurs after a 'pci_enable_pcie_error_reporting()' call, it must be undone by a corresponding 'pci_disable_pcie_error_reporting()' call, as already done in the remove function. Fixes: 5eae00c5 ("i40evf: main driver core") Signed-off-by:
Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by:
Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Christophe JAILLET authored
[ Upstream commit 45890756 ] If an error occurs after a 'pci_enable_pcie_error_reporting()' call, it must be undone by a corresponding 'pci_disable_pcie_error_reporting()' call, as already done in the remove function. Fixes: 111b9dc5 ("e1000e: add aer support") Signed-off-by:
Christophe JAILLET <christophe.jaillet@wanadoo.fr> Acked-by:
Sasha Neftin <sasha.neftin@intel.com> Tested-by:
Dvora Fuxbrumer <dvorax.fuxbrumer@linux.intel.com> Signed-off-by:
Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Christophe JAILLET authored
[ Upstream commit e85e14d6 ] If an error occurs after a 'pci_enable_pcie_error_reporting()' call, it must be undone by a corresponding 'pci_disable_pcie_error_reporting()' call, as already done in the remove function. Fixes: 19ae1b3f ("fm10k: Add support for PCI power management and error handling") Signed-off-by:
Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by:
Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Christophe JAILLET authored
[ Upstream commit fea03b1c ] If an error occurs after a 'pci_enable_pcie_error_reporting()' call, it must be undone by a corresponding 'pci_disable_pcie_error_reporting()' call, as already done in the remove function. Fixes: 40a914fa ("igb: Add support for pci-e Advanced Error Reporting") Signed-off-by:
Christophe JAILLET <christophe.jaillet@wanadoo.fr> Tested-by:
Tony Brelinski <tonyx.brelinski@intel.com> Signed-off-by:
Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Christophe JAILLET authored
[ Upstream commit dd2aefcd ] If an error occurs after a 'pci_enable_pcie_error_reporting()' call, it must be undone by a corresponding 'pci_disable_pcie_error_reporting()' call, as already done in the remove function. Fixes: 6fabd715 ("ixgbe: Implement PCIe AER support") Signed-off-by:
Christophe JAILLET <christophe.jaillet@wanadoo.fr> Tested-by:
Tony Brelinski <tonyx.brelinski@intel.com> Signed-off-by:
Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Eric Dumazet authored
commit c7bb4b89 upstream. While TCP stack scales reasonably well, there is still one part that can be used to DDOS it. IPv6 Packet too big messages have to lookup/insert a new route, and if abused by attackers, can easily put hosts under high stress, with many cpus contending on a spinlock while one is stuck in fib6_run_gc() ip6_protocol_deliver_rcu() icmpv6_rcv() icmpv6_notify() tcp_v6_err() tcp_v6_mtu_reduced() inet6_csk_update_pmtu() ip6_rt_update_pmtu() __ip6_rt_update_pmtu() ip6_rt_cache_alloc() ip6_dst_alloc() dst_alloc() ip6_dst_gc() fib6_run_gc() spin_lock_bh() ... Some of our servers have been hit by malicious ICMPv6 packets trying to _increase_ the MTU/MSS of TCP flows. We believe these ICMPv6 packets are a result of a bug in one ISP stack, since they were blindly sent back for _every_ (small) packet sent to them. These packets are for one TCP flow: 09:24:36.266491 IP6 Addr1 > Victim ICMP6, packet too big, mtu 1460, length 1240 09:24:36.266509 IP6 Addr1 > Victim ICMP6, packet too big, mtu 1460, length 1240 09:24:36.316688 IP6 Addr1 > Victim ICMP6, packet too big, mtu 1460, length 1240 09:24:36.316704 IP6 Addr1 > Victim ICMP6, packet too big, mtu 1460, length 1240 09:24:36.608151 IP6 Addr1 > Victim ICMP6, packet too big, mtu 1460, length 1240 TCP stack can filter some silly requests : 1) MTU below IPV6_MIN_MTU can be filtered early in tcp_v6_err() 2) tcp_v6_mtu_reduced() can drop requests trying to increase current MSS. This tests happen before the IPv6 routing stack is entered, thus removing the potential contention and route exhaustion. Note that IPv6 stack was performing these checks, but too late (ie : after the route has been added, and after the potential garbage collect war) v2: fix typo caught by Martin, thanks ! v3: exports tcp_mtu_to_mss(), caught by David, thanks ! Fixes: 1da177e4 ("Linux-2.6.12-rc2") Signed-off-by:
Eric Dumazet <edumazet@google.com> Reviewed-by:
Maciej Żenczykowski <maze@google.com> Cc: Martin KaFai Lau <kafai@fb.com> Acked-by:
Martin KaFai Lau <kafai@fb.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Eric Dumazet authored
commit 561022ac upstream. While tp->mtu_info is read while socket is owned, the write sides happen from err handlers (tcp_v[46]_mtu_reduced) which only own the socket spinlock. Fixes: 563d34d0 ("tcp: dont drop MTU reduction indications") Signed-off-by:
Eric Dumazet <edumazet@google.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Taehee Yoo authored
commit 67a9c943 upstream. skb_tunnel_info() returns pointer of lwtstate->data as ip_tunnel_info type without validation. lwtstate->data can have various types such as mpls_iptunnel_encap, etc and these are not compatible. So skb_tunnel_info() should validate before returning that pointer. Splat looks like: BUG: KASAN: slab-out-of-bounds in vxlan_get_route+0x418/0x4b0 [vxlan] Read of size 2 at addr ffff888106ec2698 by task ping/811 CPU: 1 PID: 811 Comm: ping Not tainted 5.13.0+ #1195 Call Trace: dump_stack_lvl+0x56/0x7b print_address_description.constprop.8.cold.13+0x13/0x2ee ? vxlan_get_route+0x418/0x4b0 [vxlan] ? vxlan_get_route+0x418/0x4b0 [vxlan] kasan_report.cold.14+0x83/0xdf ? vxlan_get_route+0x418/0x4b0 [vxlan] vxlan_get_route+0x418/0x4b0 [vxlan] [ ... ] vxlan_xmit_one+0x148b/0x32b0 [vxlan] [ ... ] vxlan_xmit+0x25c5/0x4780 [vxlan] [ ... ] dev_hard_start_xmit+0x1ae/0x6e0 __dev_queue_xmit+0x1f39/0x31a0 [ ... ] neigh_xmit+0x2f9/0x940 mpls_xmit+0x911/0x1600 [mpls_iptunnel] lwtunnel_xmit+0x18f/0x450 ip_finish_output2+0x867/0x2040 [ ... ] Fixes: 61adedf3 ("route: move lwtunnel state to dst_entry") Signed-off-by:
Taehee Yoo <ap420073@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Pavel Skripkin authored
commit 0336f8ff upstream. priv is netdev private data and it cannot be used after free_netdev() call. Using priv after free_netdev() can cause UAF bug. Fix it by moving free_netdev() at the end of the function. Fixes: 1e0a8b13 ("tlan: cancel work at remove path") Signed-off-by:
Pavel Skripkin <paskripkin@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Pavel Skripkin authored
commit ad297cd2 upstream. adpt is netdev private data and it cannot be used after free_netdev() call. Using adpt after free_netdev() can cause UAF bug. Fix it by moving free_netdev() at the end of the function. Fixes: 54e19bc7 ("net: qcom/emac: do not use devm on internal phy pdev") Signed-off-by:
Pavel Skripkin <paskripkin@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Pavel Skripkin authored
commit c78eaeeb upstream. In case of netdev registration failure the code path will jump to init_fail label: init_fail: netdev_err(ndev, "init failed\n"); moxart_mac_free_memory(ndev); irq_map_fail: free_netdev(ndev); return ret; So, there is no need to call free_netdev() before jumping to error handling path, since it can cause UAF or double-free bug. Fixes: 6c821bd9 ("net: Add MOXA ART SoCs ethernet driver") Signed-off-by:
Pavel Skripkin <paskripkin@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Florian Fainelli authored
commit 2b452550 upstream. Make sure that we disable each of the TX and RX queues in the TDMA and RDMA control registers. This is a correctness change to be symmetrical with the code that enables the TX and RX queues. Tested-by:
Maxime Ripard <maxime@cerno.tech> Fixes: 1c1008c7 ("net: bcmgenet: add main driver file") Signed-off-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Wolfgang Bumiller authored
commit a019abd8 upstream. Since commit 2796d0c6 ("bridge: Automatically manage port promiscuous mode.") bridges with `vlan_filtering 1` and only 1 auto-port don't set IFF_PROMISC for unicast-filtering-capable ports. Normally on port changes `br_manage_promisc` is called to update the promisc flags and unicast filters if necessary, but it cannot distinguish between *new* ports and ones losing their promisc flag, and new ports end up not receiving the MAC address list. Fix this by calling `br_fdb_sync_static` in `br_add_if` after the port promisc flags are updated and the unicast filter was supposed to have been filled. Fixes: 2796d0c6 ("bridge: Automatically manage port promiscuous mode.") Signed-off-by:
Wolfgang Bumiller <w.bumiller@proxmox.com> Acked-by:
Nikolay Aleksandrov <nikolay@nvidia.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Vadim Fedorenko authored
commit 40fc3054 upstream. Commit 628a5c56 ("[INET]: Add IP(V6)_PMTUDISC_RPOBE") introduced ip6_skb_dst_mtu with return value of signed int which is inconsistent with actually returned values. Also 2 users of this function actually assign its value to unsigned int variable and only __xfrm6_output assigns result of this function to signed variable but actually uses as unsigned in further comparisons and calls. Change this function to return unsigned int value. Fixes: 628a5c56 ("[INET]: Add IP(V6)_PMTUDISC_RPOBE") Reviewed-by:
David Ahern <dsahern@kernel.org> Signed-off-by:
Vadim Fedorenko <vfedorenko@novek.ru> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Odin Ugedal authored
[ Upstream commit 72d0ad7c ] The time remaining until expiry of the refresh_timer can be negative. Casting the type to an unsigned 64-bit value will cause integer underflow, making the runtime_refresh_within return false instead of true. These situations are rare, but they do happen. This does not cause user-facing issues or errors; other than possibly unthrottling cfs_rq's using runtime from the previous period(s), making the CFS bandwidth enforcement less strict in those (special) situations. Signed-off-by:
Odin Ugedal <odin@uged.al> Signed-off-by:
Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by:
Ben Segall <bsegall@google.com> Link: https://lore.kernel.org/r/20210629121452.18429-1-odin@uged.al Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Colin Ian King authored
[ Upstream commit 332a9dd1 ] The shifting of the u8 integer returned fom ahc_inb(ahc, port+3) by 24 bits to the left will be promoted to a 32 bit signed int and then sign-extended to a u64. In the event that the top bit of the u8 is set then all then all the upper 32 bits of the u64 end up as also being set because of the sign-extension. Fix this by casting the u8 values to a u64 before the 24 bit left shift. [ This dates back to 2002, I found the offending commit from the git history git://git.kernel.org/pub/scm/linux/kernel/git/tglx/history.git, commit f58eb66c0b0a ("Update aic7xxx driver to 6.2.10...") ] Link: https://lore.kernel.org/r/20210621151727.20667-1-colin.king@canonical.com Signed-off-by:
Colin Ian King <colin.king@canonical.com> Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com> Addresses-Coverity: ("Unintended sign extension") Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Krzysztof Kozlowski authored
[ Upstream commit 742b0d7e ] Interrupt line can be configured on different hardware in different way, even inverted. Therefore driver should not enforce specific trigger type - edge falling - but instead rely on Devicetree to configure it. The Maxim 77686 datasheet describes the interrupt line as active low with a requirement of acknowledge from the CPU therefore the edge falling is not correct. The interrupt line is shared between PMIC and RTC driver, so using level sensitive interrupt is here especially important to avoid races. With an edge configuration in case if first PMIC signals interrupt followed shortly after by the RTC, the interrupt might not be yet cleared/acked thus the second one would not be noticed. Signed-off-by:
Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by:
Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/20210526172036.183223-6-krzysztof.kozlowski@canonical.com Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Matthias Maennich authored
[ Upstream commit a979522a ] To avoid unnecessary recompilations, mkcompile_h does not regenerate compile.h if just the timestamp changed. Though, if KBUILD_BUILD_TIMESTAMP is set, an explicit timestamp for the build was requested, in which case we should not ignore it. If a user follows the documentation for reproducible builds [1] and defines KBUILD_BUILD_TIMESTAMP as the git commit timestamp, a clean build will have the correct timestamp. A subsequent cherry-pick (or amend) changes the commit timestamp and if an incremental build is done with a different KBUILD_BUILD_TIMESTAMP now, that new value is not taken into consideration. But it should for reproducibility. Hence, whenever KBUILD_BUILD_TIMESTAMP is explicitly set, do not ignore UTS_VERSION when making a decision about whether the regenerated version of compile.h should be moved into place. [1] https://www.kernel.org/doc/html/latest/kbuild/reproducible-builds.html Signed-off-by:
Matthias Maennich <maennich@google.com> Signed-off-by:
Masahiro Yamada <masahiroy@kernel.org> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Yang Yingliang authored
[ Upstream commit a052b511 ] Fix the following make W=1 kernel build warning: drivers/thermal/thermal_core.c:1376: warning: expecting prototype for thermal_device_unregister(). Prototype was for thermal_zone_device_unregister() instead Signed-off-by:
Yang Yingliang <yangyingliang@huawei.com> Signed-off-by:
Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20210517051020.3463536-1-yangyingliang@huawei.com Signed-off-by:
Sasha Levin <sashal@kernel.org>
-