Pull drm fixes from Dave Airlie:
 "This week's fixes, pretty quiet, about right for rc2. amdgpu is the
  bulk of them but the scheduler ones have been reported in a few places
  I think.

  Otherwise just some minor i915 fixes and a few other scattered around:

  scheduler:
   - two refcounting fixes

  cma-helper:
   - use correct free path for noncoherent

  efifb:
   - probing fix

  amdgpu:
   - Better debugging info for SMU msgs
   - Better error reporting when adding IP blocks
   - Fix UVD powergating regression on CZ
   - Clock reporting fix for navi1x
   - OLED panel backlight fix
   - Fix scaling on VGA/DVI for non-DC display code
   - Fix GLFCLK handling for RGP on some APUs
   - fix potential memory leak

  amdkfd:
   - GPU reset fix

  i915:
   - return error handling fix
   - ADL-P display fix
   - TGL DSI display clocks fix

  nouveau:
   - infoframe corruption fix

  sun4i:
   - Kconfig fix"

* tag 'drm-fixes-2021-11-19' of git://anongit.freedesktop.org/drm/drm:
  drm/amd/amdgpu: fix potential memleak
  drm/amd/amdkfd: Fix kernel panic when reset failed and been triggered again
  drm/amd/pm: add GFXCLK/SCLK clocks level print support for APUs
  drm/amdgpu: fix set scaling mode Full/Full aspect/Center not works on vga and dvi connectors
  drm/amd/display: Fix OLED brightness control on eDP
  drm/amd/pm: Remove artificial freq level on Navi1x
  drm/amd/pm: avoid duplicate powergate/ungate setting
  drm/amdgpu: add error print when failing to add IP block(v2)
  drm/amd/pm: Enhanced reporting also for a stuck command
  drm/i915/guc: fix NULL vs IS_ERR() checking
  drm/i915/dsi/xelpd: Fix the bit mask for wakeup GB
  Revert "drm/i915/tgl/dsi: Gate the ddi clocks after pll mapping"
  fbdev: Prevent probing generic drivers if a FB is already registered
  drm/scheduler: fix drm_sched_job_add_implicit_dependencies harder
  drm/scheduler: fix drm_sched_job_add_implicit_dependencies
  drm/sun4i: fix unmet dependency on RESET_CONTROLLER for PHY_SUN6I_MIPI_DPHY
  drm/cma-helper: Release non-coherent memory with dma_free_noncoherent()
  drm/nouveau: hdmigv100.c: fix corrupted HDMI Vendor InfoFrame

When commit 5d1ceb39

 ("x86: Fix __get_wchan() for !STACKTRACE")
moved from stacktrace to native unwind_*() usage, the
try_get_task_stack() got lost, leading to use-after-free issues for
dying tasks.

Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Fixes: 5d1ceb39 ("x86: Fix __get_wchan() for !STACKTRACE")
Link: https://bugzilla.kernel.org/show_bug.cgi?id=215031
Link: https://lore.kernel.org/stable/YZV02RCRVHIa144u@fedora64.linuxtx.org/


Reported-by: Justin Forbes <jmforbes@linuxtx.org>
Reported-by: Holger Hoffstätte <holger@applied-asynchrony.com>
Cc: Qi Zheng <zhengqi.arch@bytedance.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Merge tag 'amd-drm-fixes-5.16-2021-11-17' of https://gitlab.freedesktop.org/agd5f/linux

 into drm-fixes

amd-drm-fixes-5.16-2021-11-17:

amdgpu:
- Better debugging info for SMU msgs
- Better error reporting when adding IP blocks
- Fix UVD powergating regression on CZ
- Clock reporting fix for navi1x
- OLED panel backlight fix
- Fix scaling on VGA/DVI for non-DC display code
- Fix GLFCLK handling for RGP on some APUs
- fix potential memory leak

amdkfd:
- GPU reset fix

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211118041638.20831-1-alexander.deucher@amd.com

Merge tag 'drm-intel-fixes-2021-11-18' of git://anongit.freedesktop.org/drm/drm-intel

 into drm-fixes

One quick fix for return error handling, one fix for ADL-P display
and one revert targeting stable 5.4, for TGL's DSI display clocks

Signed-off-by: Dave Airlie <airlied@redhat.com>

From: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/YZbUPIHpR1S3JZ2b@intel.com

A infoframe corruption fix for nouveau, a wrong free function usage fix
for GEM CMA helpers, a Kconfig dependency fix for sun4i, two fixes for
drm/scheduler refcounting and a probing fix for efifb.

Signed-off-by: Dave Airlie <airlied@redhat.com>

From: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20211118075447.5rn6zaulnrequqnm@gilmour

Pull zstd fixes from Nick Terrell:
 "Fix stack usage on parisc & improve code size bloat

  This contains three commits:

   1. Fixes a minor unused variable warning reported by Kernel test
      robot [0].

   2. Improves the reported code bloat (-88KB / 374KB) [1] by outlining
      some functions that are unlikely to be used in performance
      sensitive workloads.

   3. Fixes the reported excess stack usage on parisc [2] by removing
      -O3 from zstd's compilation flags. -O3 triggered bugs in the
      hppa-linux-gnu gcc-8 compiler. -O2 performance is acceptable:
      neutral compression, about -1% decompression speed. We also reduce
      code bloat (-105KB / 374KB).

  After this our code bloat is cut from 374KB to 105KB with gcc-11. If
  we wanted to cut the remaining 105KB we'd likely have to trade
  signicant performance, so I want to say that this is enough for now.

  We should be able to get further gains without sacrificing speed, but
  that will take some significant optimization effort, and isn't
  suitable for a quick fix. I've opened an upstream issue [3] to track
  the code size, and try to avoid future regressions, and improve it in
  the long term"

Link: https://lore.kernel.org/linux-mm/202111120312.833wII4i-lkp@intel.com/T/ [0]
Link: https://lkml.org/lkml/2021/11/15/710 [1]
Link: https://lkml.org/lkml/2021/11/14/189 [2]
Link: https://github.com/facebook/zstd/issues/2867 [3]
Link: https://lore.kernel.org/r/20211117014949.1169186-1-nickrterrell@gmail.com/
Link: https://lore.kernel.org/r/20211117201459.1194876-1-nickrterrell@gmail.com/

* tag 'zstd-for-linus-5.16-rc1' of git://github.com/terrelln/linux:
  lib: zstd: Don't add -O3 to cflags
  lib: zstd: Don't inline functions in zstd_opt.c
  lib: zstd: Fix unused variable warning

Pull thermal control fixes from Rafael Wysocki:
 "These fix the handling of thermal zones during system resume and
  disable building of the int340x thermal driver on 32-bit.

  Specifics:

   - Prevent the previous high and low thermal zone trip values from
     being retained over a system suspend-resume cycle (Manaf
     Meethalavalappu Pallikunhi)

   - Prevent the int340x thermal driver from being built in 32-bit
     kernel configurations, because running it on 32-bit is questionable
     (Arnd Bergmann)"

* tag 'thermal-5.16-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  thermal: core: Reset previous low and high trip during thermal zone init
  thermal: int340x: Limit Kconfig to 64-bit

Pull power management fixes from Rafael Wysocki:
 "These fix a system-wide suspend issue in the DTPM framework and
  improve the Energy Model documentation.

  Specifics:

   - Fix system suspend handling in DTPM when it is enabled, but not
     actually used (Daniel Lezcano)

   - Describe the new cpufreq callback for Energy Model registration and
     explain the "advanced" and "simple" EM variants in the EM
     documentation (Lukasz Luba)"

* tag 'pm-5.16-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  Documentation: power: Describe 'advanced' and 'simple' EM models
  Documentation: power: Add description about new callback for EM registration
  powercap: DTPM: Fix suspend failure and kernel warning

Pull ACPI fix from Rafael Wysocki:
 "Revert the change attempting to release PM resources blocked by unused
  ACPI objects after device enumeration, because it caused boot issues
  to appear on multiple systems"

* tag 'acpi-5.16-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  Revert "ACPI: scan: Release PM resources blocked by unused objects"

Merge tag 'platform-drivers-x86-v5.16-2' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86

Pull x86 platform driver fixes from Hans de Goede:
 "Various build- and bug-fixes as well as one hardware-id addition"

* tag 'platform-drivers-x86-v5.16-2' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86:
  platform/x86: thinkpad_acpi: fix documentation for adaptive keyboard
  platform/x86: thinkpad_acpi: Fix WWAN device disabled issue after S3 deep
  platform/x86: thinkpad_acpi: Add support for dual fan control
  platform/x86: think-lmi: Abort probe on analyze failure
  platform/x86: dell-wmi-descriptor: disable by default
  platform/x86: samsung-laptop: Fix typo in a comment
  platform/x86: hp_accel: Fix an error handling path in 'lis3lv02d_probe()'
  platform/x86: amd-pmc: Make CONFIG_AMD_PMC depend on RTC_CLASS
  platform/mellanox: mlxreg-lc: fix error code in mlxreg_lc_create_static_devices()

Pull spi fixes from Mark Brown:
 "A few small fixes for v5.16, one in the core for an issue with
  handling of controller unregistration that was introduced with the
  fixes for registering nested SPI controllers and a few more minor
  device specific ones"

* tag 'spi-fix-v5.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
  spi: fix use-after-free of the add_lock mutex
  spi: spi-geni-qcom: fix error handling in spi_geni_grab_gpi_chan()
  spi: lpspi: Silence error message upon deferred probe
  spi: cadence-quadspi: fix write completion support

After the update to zstd-1.4.10 passing -O3 is no longer necessary to
get good performance from zstd. Using the default optimization level -O2
is sufficient to get good performance.

I've measured no significant change to compression speed, and a ~1%
decompression speed loss, which is acceptable.

This fixes the reported parisc -Wframe-larger-than=1536 errors [0]. The
gcc-8-hppa-linux-gnu compiler performed very poorly with -O3, generating
stacks that are ~3KB. With -O2 these same functions generate stacks in
the < 100B, completely fixing the problem. Function size deltas are
listed below:

ZSTD_compressBlock_fast_extDict_generic: 3800 -> 68
ZSTD_compressBlock_fast: 2216 -> 40
ZSTD_compressBlock_fast_dictMatchState: 1848 ->  64
ZSTD_compressBlock_doubleFast_extDict_generic: 3744 -> 76
ZSTD_fillDoubleHashTable: 3252 -> 0
ZSTD_compressBlock_doubleFast: 5856 -> 36
ZSTD_compressBlock_doubleFast_dictMatchState: 5380 -> 84
ZSTD_copmressBlock_lazy2: 2420 -> 72

Additionally, this improves the reported code bloat [1]. With gcc-11
bloat-o-meter shows an 80KB code size improvement:

```
> ../scripts/bloat-o-meter vmlinux.old vmlinux
add/remove: 31/8 grow/shrink: 24/155 up/down: 25734/-107924 (-82190)
Total: Before=6418562, After=6336372, chg -1.28%
```

Compared to before the zstd-1.4.10 update we see a total code size
regression of 105KB, down from 374KB at v5.16-rc1:

```
> ../scripts/bloat-o-meter vmlinux.old vmlinux
add/remove: 292/62 grow/shrink: 56/88 up/down: 235009/-127487 (107522)
Total: Before=6228850, After=6336372, chg +1.73%
```

[0] https://lkml.org/lkml/2021/11/15/710
[1] https://lkml.org/lkml/2021/11/14/189

Link: https://lore.kernel.org/r/20211117014949.1169186-4-nickrterrell@gmail.com/
Link: https://lore.kernel.org/r/20211117201459.1194876-4-nickrterrell@gmail.com/



Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Tested-by: Geert Uytterhoeven <geert@linux-m68k.org>
Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Nick Terrell <terrelln@fb.com>

`zstd_opt.c` contains the match finder for the highest compression
levels. These levels are already very slow, and are unlikely to be used
in the kernel. If they are used, they shouldn't be used in latency
sensitive workloads, so slowing them down shouldn't be a big deal.

This saves 188 KB of the 288 KB regression reported by Geert Uytterhoeven [0].
I've also opened an issue upstream [1] so that we can properly tackle
the code size issue in `zstd_opt.c` for all users, and can hopefully
remove this hack in the next zstd version we import.

Bloat-o-meter output on x86-64:

```
> ../scripts/bloat-o-meter vmlinux.old vmlinux
add/remove: 6/5 grow/shrink: 1/9 up/down: 16673/-209939 (-193266)
Function                                     old     new   delta
ZSTD_compressBlock_opt_generic.constprop       -    7559   +7559
ZSTD_insertBtAndGetAllMatches                  -    6304   +6304
ZSTD_insertBt1                                 -    1731   +1731
ZSTD_storeSeq                                  -     693    +693
ZSTD_BtGetAllMatches                           -     255    +255
ZSTD_updateRep                                 -     128    +128
ZSTD_updateTree                               96      99      +3
ZSTD_insertAndFindFirstIndexHash3             81       -     -81
ZSTD_setBasePrices.constprop                  98       -     -98
ZSTD_litLengthPrice.constprop                138       -    -138
ZSTD_count                                   362     181    -181
ZSTD_count_2segments                        1407     938    -469
ZSTD_insertBt1.constprop                    2689       -   -2689
ZSTD_compressBlock_btultra2                19990     423  -19567
ZSTD_compressBlock_btultra                 19633      15  -19618
ZSTD_initStats_ultra                       19825       -  -19825
ZSTD_compressBlock_btopt                   20374      12  -20362
ZSTD_compressBlock_btopt_extDict           29984      12  -29972
ZSTD_compressBlock_btultra_extDict         30718      15  -30703
ZSTD_compressBlock_btopt_dictMatchState    32689      12  -32677
ZSTD_compressBlock_btultra_dictMatchState   33574      15  -33559
Total: Before=6611828, After=6418562, chg -2.92%
```

[0] https://lkml.org/lkml/2021/11/14/189
[1] https://github.com/facebook/zstd/issues/2862

Link: https://lore.kernel.org/r/20211117014949.1169186-3-nickrterrell@gmail.com/
Link: https://lore.kernel.org/r/20211117201459.1194876-3-nickrterrell@gmail.com/



Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Tested-by: Geert Uytterhoeven <geert@linux-m68k.org>
Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Nick Terrell <terrelln@fb.com>

The variable `litLengthSum` is only used by an `assert()`, so when
asserts are disabled the compiler doesn't see any usage and warns.

This issue is already fixed upstream by PR #2838 [0]. It was reported
by the Kernel test robot in [1].

Another approach would be to change zstd's disabled `assert()`
definition to use the argument in a disabled branch, instead of
ignoring the argument. I've avoided this approach because there are
some small changes necessary to get zstd to build, and I would
want to thoroughly re-test for performance, since that is slightly
changing the code in every function in zstd. It seems like a
trivial change, but some functions are pretty sensitive to small
changes. However, I think it is a valid approach that I would
like to see upstream take, so I've opened Issue #2868 to attempt
this upstream.

Lastly, I've chosen not to use __maybe_unused because all code
in lib/zstd/ must eventually be upstreamed. Upstream zstd can't
use __maybe_unused because it isn't portable across all compilers.

[0] https://github.com/facebook/zstd/pull/2838
[1] https://lore.kernel.org/linux-mm/202111120312.833wII4i-lkp@intel.com/T/
[2] https://github.com/facebook/zstd/issues/2868

Link: https://lore.kernel.org/r/20211117014949.1169186-2-nickrterrell@gmail.com/
Link: https://lore.kernel.org/r/20211117201459.1194876-2-nickrterrell@gmail.com/



Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Nick Terrell <terrelln@fb.com>

Pull networking fixes from Jakub Kicinski:
 "Including fixes from bpf, mac80211.

  Current release - regressions:

   - devlink: don't throw an error if flash notification sent before
     devlink visible

   - page_pool: Revert "page_pool: disable dma mapping support...",
     turns out there are active arches who need it

  Current release - new code bugs:

   - amt: cancel delayed_work synchronously in amt_fini()

  Previous releases - regressions:

   - xsk: fix crash on double free in buffer pool

   - bpf: fix inner map state pruning regression causing program
     rejections

   - mac80211: drop check for DONT_REORDER in __ieee80211_select_queue,
     preventing mis-selecting the best effort queue

   - mac80211: do not access the IV when it was stripped

   - mac80211: fix radiotap header generation, off-by-one

   - nl80211: fix getting radio statistics in survey dump

   - e100: fix device suspend/resume

  Previous releases - always broken:

   - tcp: fix uninitialized access in skb frags array for Rx 0cp

   - bpf: fix toctou on read-only map's constant scalar tracking

   - bpf: forbid bpf_ktime_get_coarse_ns and bpf_timer_* in tracing
     progs

   - tipc: only accept encrypted MSG_CRYPTO msgs

   - smc: transfer remaining wait queue entries during fallback, fix
     missing wake ups

   - udp: validate checksum in udp_read_sock() (when sockmap is used)

   - sched: act_mirred: drop dst for the direction from egress to
     ingress

   - virtio_net_hdr_to_skb: count transport header in UFO, prevent
     allowing bad skbs into the stack

   - nfc: reorder the logic in nfc_{un,}register_device, fix unregister

   - ipsec: check return value of ipv6_skip_exthdr

   - usb: r8152: add MAC passthrough support for more Lenovo Docks"

* tag 'net-5.16-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (96 commits)
  ptp: ocp: Fix a couple NULL vs IS_ERR() checks
  net: ethernet: dec: tulip: de4x5: fix possible array overflows in type3_infoblock()
  net: tulip: de4x5: fix the problem that the array 'lp->phy[8]' may be out of bound
  ipv6: check return value of ipv6_skip_exthdr
  e100: fix device suspend/resume
  devlink: Don't throw an error if flash notification sent before devlink visible
  page_pool: Revert "page_pool: disable dma mapping support..."
  ethernet: hisilicon: hns: hns_dsaf_misc: fix a possible array overflow in hns_dsaf_ge_srst_by_port()
  octeontx2-af: debugfs: don't corrupt user memory
  NFC: add NCI_UNREG flag to eliminate the race
  NFC: reorder the logic in nfc_{un,}register_device
  NFC: reorganize the functions in nci_request
  tipc: check for null after calling kmemdup
  i40e: Fix display error code in dmesg
  i40e: Fix creation of first queue by omitting it if is not power of two
  i40e: Fix warning message and call stack during rmmod i40e driver
  i40e: Fix ping is lost after configuring ADq on VF
  i40e: Fix changing previously set num_queue_pairs for PFs
  i40e: Fix NULL ptr dereference on VSI filter sync
  i40e: Fix correct max_pkt_size on VF RX queue
  ...

Pull btrfs fixes from David Sterba:
 "Several xes and one old ioctl deprecation. Namely there's fix for
  crashes/warnings with lzo compression that was suspected to be caused
  by first pull merge resolution, but it was a different bug.

  Summary:

   - regression fix for a crash in lzo due to missing boundary checks of
     the page array

   - fix crashes on ARM64 due to missing barriers when synchronizing
     status bits between work queues

   - silence lockdep when reading chunk tree during mount

   - fix false positive warning in integrity checker on devices with
     disabled write caching

   - fix signedness of bitfields in scrub

   - start deprecation of balance v1 ioctl"

* tag 'for-5.16-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
  btrfs: deprecate BTRFS_IOC_BALANCE ioctl
  btrfs: make 1-bit bit-fields of scrub_page unsigned int
  btrfs: check-integrity: fix a warning on write caching disabled disk
  btrfs: silence lockdep when reading chunk tree during mount
  btrfs: fix memory ordering between normal and ordered work functions
  btrfs: fix a out-of-bound access in copy_compressed_data_to_page()

Pull UDF fix from Jan Kara:
 "A fix for a long-standing UDF bug where we were not properly
  validating directory position inside readdir"

* tag 'fs_for_v5.16-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs:
  udf: Fix crash after seekdir

Pull setattr idmapping fix from Christian Brauner:
 "This contains a simple fix for setattr. When determining the validity
  of the attributes the ia_{g,u}id fields contain the value that will be
  written to inode->i_{g,u}id. When the {g,u}id attribute of the file
  isn't altered and the caller's fs{g,u}id matches the current {g,u}id
  attribute the attribute change is allowed.

  The value in ia_{g,u}id does already account for idmapped mounts and
  will have taken the relevant idmapping into account. So in order to
  verify that the {g,u}id attribute isn't changed we simple need to
  compare the ia_{g,u}id value against the inode's i_{g,u}id value.

  This only has any meaning for idmapped mounts as idmapping helpers are
  idempotent without them. And for idmapped mounts this really only has
  a meaning when circular idmappings are used, i.e. mappings where e.g.
  id 1000 is mapped to id 1001 and id 1001 is mapped to id 1000. Such
  ciruclar mappings can e.g. be useful when sharing the same home
  directory between multiple users at the same time.

  Before this patch we could end up denying legitimate attribute changes
  and allowing invalid attribute changes when circular mappings are
  used. To even get into this situation the caller must've been
  privileged both to create that mapping and to create that idmapped
  mount.

  This hasn't been seen in the wild anywhere but came up when expanding
  the fstest suite during work on a series of hardening patches. All
  idmapped fstests pass without any regressions and we're adding new
  tests to verify the behavior of circular mappings.

  The new tests can be found at [1]"

Link: https://lore.kernel.org/linux-fsdevel/20211109145713.1868404-2-brauner@kernel.org [1]

* tag 'fs.idmapped.v5.16-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux:
  fs: handle circular mappings correctly

Pull parisc fixes from Helge Deller:
 "parisc bug and warning fixes and wire up futex_waitv.

  Fix some warnings which showed up with allmodconfig builds, a revert
  of a change to the sigreturn trampoline which broke signal handling,
  wire up futex_waitv and add CONFIG_PRINTK_TIME=y to 32bit defconfig"

* tag 'for-5.16/parisc-4' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
  parisc: Enable CONFIG_PRINTK_TIME=y in 32bit defconfig
  Revert "parisc: Reduce sigreturn trampoline to 3 instructions"
  parisc: Wrap assembler related defines inside __ASSEMBLY__
  parisc: Wire up futex_waitv
  parisc: Include stringify.h to avoid build error in crypto/api.c
  parisc/sticon: fix reverse colors

Pull KVM fixes from Paolo Bonzini:
 "Selftest changes:

   - Cleanups for the perf test infrastructure and mapping hugepages

   - Avoid contention on mmap_sem when the guests start to run

   - Add event channel upcall support to xen_shinfo_test

  x86 changes:

   - Fixes for Xen emulation

   - Kill kvm_map_gfn() / kvm_unmap_gfn() and broken gfn_to_pfn_cache

   - Fixes for migration of 32-bit nested guests on 64-bit hypervisor

   - Compilation fixes

   - More SEV cleanups

  Generic:

   - Cap the return value of KVM_CAP_NR_VCPUS to both KVM_CAP_MAX_VCPUS
     and num_online_cpus(). Most architectures were only using one of
     the two"

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (42 commits)
  KVM: x86: Cap KVM_CAP_NR_VCPUS by KVM_CAP_MAX_VCPUS
  KVM: s390: Cap KVM_CAP_NR_VCPUS by num_online_cpus()
  KVM: RISC-V: Cap KVM_CAP_NR_VCPUS by KVM_CAP_MAX_VCPUS
  KVM: PPC: Cap KVM_CAP_NR_VCPUS by KVM_CAP_MAX_VCPUS
  KVM: MIPS: Cap KVM_CAP_NR_VCPUS by KVM_CAP_MAX_VCPUS
  KVM: arm64: Cap KVM_CAP_NR_VCPUS by kvm_arm_default_max_vcpus()
  KVM: x86: Assume a 64-bit hypercall for guests with protected state
  selftests: KVM: Add /x86_64/sev_migrate_tests to .gitignore
  riscv: kvm: fix non-kernel-doc comment block
  KVM: SEV: Fix typo in and tweak name of cmd_allowed_from_miror()
  KVM: SEV: Drop a redundant setting of sev->asid during initialization
  KVM: SEV: WARN if SEV-ES is marked active but SEV is not
  KVM: SEV: Set sev_info.active after initial checks in sev_guest_init()
  KVM: SEV: Disallow COPY_ENC_CONTEXT_FROM if target has created vCPUs
  KVM: Kill kvm_map_gfn() / kvm_unmap_gfn() and gfn_to_pfn_cache
  KVM: nVMX: Use a gfn_to_hva_cache for vmptrld
  KVM: nVMX: Use kvm_read_guest_offset_cached() for nested VMCS check
  KVM: x86/xen: Use sizeof_field() instead of open-coding it
  KVM: nVMX: Use kvm_{read,write}_guest_cached() for shadow_vmcs12
  KVM: x86/xen: Fix get_attr of KVM_XEN_ATTR_TYPE_SHARED_INFO
  ...

Merge int340x thermal driver Kconfig fix for 5.16-rc2.

* thermal-int340x:
  thermal: int340x: Limit Kconfig to 64-bit

Merge a Dynamic Thermal Power Management (DTPM) framework fix for
5.16-rc2.

* powercap:
  powercap: DTPM: Fix suspend failure and kernel warning

Pull documentation fixes from Jonathan Corbet:
 "A handful of documentation fixes for 5.16"

* tag 'docs-5.16-2' of git://git.lwn.net/linux:
  Documentation/process: fix a cross reference
  Documentation: update vcpu-requests.rst reference
  docs: accounting: update delay-accounting.rst reference
  libbpf: update index.rst reference
  docs: filesystems: Fix grammatical error "with" to "which"
  doc/zh_CN: fix a translation error in management-style
  docs: ftrace: fix the wrong path of tracefs
  Documentation: arm: marvell: Fix link to armada_1000_pb.pdf document
  Documentation: arm: marvell: Put Armada XP section between Armada 370 and 375
  Documentation: arm: marvell: Add some links to homepage / product infos
  docs: Update Sphinx requirements

Pull printk fixes from Petr Mladek:

 - Try to flush backtraces from other CPUs also on the local one. This
   was a regression caused by printk_safe buffers removal.

 - Remove header dependency warning.

* tag 'printk-for-5.16-fixup' of git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux:
  printk: Remove printk.h inclusion in percpu.h
  printk: restore flushing of NMI buffers on remote CPUs after NMI backtraces

The ptp_ocp_get_mem() function does not return NULL, it returns error
pointers.

Fixes: 773bda96

 ("ptp: ocp: Expose various resources on the timecard.")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The definition of macro MOTO_SROM_BUG is:
  #define MOTO_SROM_BUG    (lp->active == 8 && (get_unaligned_le32(
  dev->dev_addr) & 0x00ffffff) == 0x3e0008)

and the if statement
  if (MOTO_SROM_BUG) lp->active = 0;

using this macro indicates lp->active could be 8. If lp->active is 8 and
the second comparison of this macro is false. lp->active will remain 8 in:
  lp->phy[lp->active].gep = (*p ? p : NULL); p += (2 * (*p) + 1);
  lp->phy[lp->active].rst = (*p ? p : NULL); p += (2 * (*p) + 1);
  lp->phy[lp->active].mc  = get_unaligned_le16(p); p += 2;
  lp->phy[lp->active].ana = get_unaligned_le16(p); p += 2;
  lp->phy[lp->active].fdx = get_unaligned_le16(p); p += 2;
  lp->phy[lp->active].ttm = get_unaligned_le16(p); p += 2;
  lp->phy[lp->active].mci = *p;

However, the length of array lp->phy is 8, so array overflows can occur.
To fix these possible array overflows, we first check lp->active and then
return -EINVAL if it is greater or equal to ARRAY_SIZE(lp->phy) (i.e. 8).

Reported-by: TOTE Robot <oslab@tsinghua.edu.cn>
Signed-off-by: Teng Qi <starmiku1207184332@gmail.com>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

In line 5001, if all id in the array 'lp->phy[8]' is not 0, when the
'for' end, the 'k' is 8.

At this time, the array 'lp->phy[8]' may be out of bound.

Signed-off-by: zhangyue <zhangyue1@kylinos.cn>
Signed-off-by: David S. Miller <davem@davemloft.net>

queue

Tony Nguyen says:

====================
Intel Wired LAN Driver Updates 2021-11-17

This series contains updates to i40e driver only.

Eryk adds accounting for VLAN header in packet size when VF port VLAN is
configured. He also fixes TC queue distribution when the user has changed
queue counts as well as for configuration of VF ADQ which caused dropped
packets.

Michal adds tracking for when a VSI is being released to prevent null
pointer dereference when managing filters.

Karen ensures PF successfully initiates VF requested reset which could
cause a call trace otherwise.

Jedrzej moves validation of channel queue value earlier to prevent
partial configuration when the value is invalid.

Grzegorz corrects the reported error when adding filter fails.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

The offset value is used in pointer math on skb->data.
Since ipv6_skip_exthdr may return -1 the pointer to uh and th
may not point to the actual udp and tcp headers and potentially
overwrite other stuff. This is why I think this should be checked.

EDIT:  added {}'s, thanks Kees

Signed-off-by: Jordy Zomer <jordy@pwning.systems>
Signed-off-by: David S. Miller <davem@davemloft.net>

As reported in [1], e100 was no longer working for suspend/resume
cycles. The previous commit mentioned in the fixes appears to have
broken things and this attempts to practice best known methods for
device power management and keep wake-up working while allowing
suspend/resume to work. To do this, I reorder a little bit of code
and fix the resume path to make sure the device is enabled.

[1] https://bugzilla.kernel.org/show_bug.cgi?id=214933

Fixes: 69a74aef

 ("e100: use generic power management")
Cc: Vaibhav Gupta <vaibhavgupta40@gmail.com>
Reported-by: Alexey Kuznetsov <axet@me.com>
Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Tested-by: Alexey Kuznetsov <axet@me.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The mlxsw driver calls to various devlink flash routines even before
users can get any access to the devlink instance itself. For example,
mlxsw_core_fw_rev_validate() one of such functions.

__mlxsw_core_bus_device_register
 -> mlxsw_core_fw_rev_validate
  -> mlxsw_core_fw_flash
   -> mlxfw_firmware_flash
    -> mlxfw_status_notify
     -> devlink_flash_update_status_notify
      -> __devlink_flash_update_notify
       -> WARN_ON(...)

It causes to the WARN_ON to trigger warning about devlink not registered.

Fixes: cf530217

 ("devlink: Notify users when objects are accessible")
Reported-by: Danielle Ratson <danieller@nvidia.com>
Tested-by: Danielle Ratson <danieller@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

This reverts commit d00e60ee.

As reported by Guillaume in [1]:
Enabling LPAE always enables CONFIG_ARCH_DMA_ADDR_T_64BIT
in 32-bit systems, which breaks the bootup proceess when a
ethernet driver is using page pool with PP_FLAG_DMA_MAP flag.
As we were hoping we had no active consumers for such system
when we removed the dma mapping support, and LPAE seems like
a common feature for 32 bits system, so revert it.

1. https://www.spinics.net/lists/netdev/msg779890.html

Fixes: d00e60ee

 ("page_pool: disable dma mapping support for 32-bit arch with 64-bit DMA")
Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com>
Reported-by: "kernelci.org bot" <bot@kernelci.org>
Tested-by: "kernelci.org bot" <bot@kernelci.org>
Acked-by: Jesper Dangaard Brouer <brouer@redhat.com>
Acked-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

ethernet: hisilicon: hns: hns_dsaf_misc: fix a possible array overflow in hns_dsaf_ge_srst_by_port()

The if statement:
  if (port >= DSAF_GE_NUM)
        return;

limits the value of port less than DSAF_GE_NUM (i.e., 8).
However, if the value of port is 6 or 7, an array overflow could occur:
  port_rst_off = dsaf_dev->mac_cb[port]->port_rst_off;

because the length of dsaf_dev->mac_cb is DSAF_MAX_PORT_NUM (i.e., 6).

To fix this possible array overflow, we first check port and if it is
greater than or equal to DSAF_MAX_PORT_NUM, the function returns.

Reported-by: TOTE Robot <oslab@tsinghua.edu.cn>
Signed-off-by: Teng Qi <starmiku1207184332@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Signed-off-by: Helge Deller <deller@gmx.de>

This reverts commit e4f2006f

.

This patch shows problems with signal handling. Revert it for now.

Signed-off-by: Helge Deller <deller@gmx.de>
Cc: <stable@vger.kernel.org> # v5.15

Building allmodconfig shows errors in the gpu/drm/msm snapdragon drivers,
because a COND() define is used there which conflicts with the COND() for
PA-RISC assembly.  Although the snapdragon driver isn't relevant for parisc, it
is nevertheless compiled when CONFIG_COMPILE_TEST is defined.

Move the COND() define and other PA-RISC mnemonics inside the #ifdef
__ASSEMBLY__ part to avoid this conflict.

Signed-off-by: Helge Deller <deller@gmx.de>
Reported-by: kernel test robot <lkp@intel.com>

Signed-off-by: Helge Deller <deller@gmx.de>

Include stringify.h to avoid this build error:
 arch/parisc/include/asm/jump_label.h: error: expected ':' before '__stringify'
 arch/parisc/include/asm/jump_label.h: error: label 'l_yes' defined but not used [-Werror=unused-label]

Signed-off-by: Helge Deller <deller@gmx.de>
Reported-by: kernel test robot <lkp@intel.com>

It doesn't make sense to return the recommended maximum number of
vCPUs which exceeds the maximum possible number of vCPUs.

Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20211116163443.88707-7-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>