Commits · ac49832306168cb25a54286be4d4bea1d9a5c2da · Mirrors / git.kernel.org / pub_scm_linux_kernel_git_stable_linux

Aug 04, 2021

net/mlx5: Fix flow table chaining · ac498323

Maor Gottlieb authored Jul 26, 2021

[ Upstream commit 8b54874e ]

Fix a bug when flow table is created in priority that already
has other flow tables as shown in the below diagram.
If the new flow table (FT-B) has the lowest level in the priority,
we need to connect the flow tables from the previous priority (p0)
to this new table. In addition when this flow table is destroyed
(FT-B), we need to connect the flow tables from the previous
priority (p0) to the next level flow table (FT-C) in the same
priority of the destroyed table (if exists).

                       ---------
                       |root_ns|
                       ---------
                            |
            --------------------------------
            |               |              |
       ----------      ----------      ---------
       |p(prio)-x|     |   p-y  |      |   p-n |
       ----------      ----------      ---------
            |               |
     ----------------  ------------------
     |ns(e.g bypass)|  |ns(e.g. kernel) |
     ----------------  ------------------
            |            |           |
	-------	       ------       ----
        |  p0 |        | p1 |       |p2|
        -------        ------       ----
           |             |    \
        --------       ------- ------
        | FT-A |       |FT-B | |FT-C|
        --------       ------- ------

Fixes: f90edfd2

 ("net/mlx5_core: Connect flow tables")
Signed-off-by: Maor Gottlieb <maorg@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ac498323

net: llc: fix skb_over_panic · 527feae5

Pavel Skripkin authored Jul 25, 2021

[ Upstream commit c7c9d210 ]

Syzbot reported skb_over_panic() in llc_pdu_init_as_xid_cmd(). The
problem was in wrong LCC header manipulations.

Syzbot's reproducer tries to send XID packet. llc_ui_sendmsg() is
doing following steps:

	1. skb allocation with size = len + header size
		len is passed from userpace and header size
		is 3 since addr->sllc_xid is set.

	2. skb_reserve() for header_len = 3
	3. filling all other space with memcpy_from_msg()

Ok, at this moment we have fully loaded skb, only headers needs to be
filled.

Then code comes to llc_sap_action_send_xid_c(). This function pushes 3
bytes for LLC PDU header and initializes it. Then comes
llc_pdu_init_as_xid_cmd(). It initalizes next 3 bytes *AFTER* LLC PDU
header and call skb_push(skb, 3). This looks wrong for 2 reasons:

	1. Bytes rigth after LLC header are user data, so this function
	   was overwriting payload.

	2. skb_push(skb, 3) call can cause skb_over_panic() since
	   all free space was filled in llc_ui_sendmsg(). (This can
	   happen is user passed 686 len: 686 + 14 (eth header) + 3 (LLC
	   header) = 703. SKB_DATA_ALIGN(703) = 704)

So, in this patch I added 2 new private constansts: LLC_PDU_TYPE_U_XID
and LLC_PDU_LEN_U_XID. LLC_PDU_LEN_U_XID is used to correctly reserve
header size to handle LLC + XID case. LLC_PDU_TYPE_U_XID is used by
llc_pdu_header_init() function to push 6 bytes instead of 3. And finally
I removed skb_push() call from llc_pdu_init_as_xid_cmd().

This changes should not affect other parts of LLC, since after
all steps we just transmit buffer.

Fixes: 1da177e4

 ("Linux-2.6.12-rc2")
Reported-and-tested-by:  <syzbot+5e5a981ad7cc54c4b2b4@syzkaller.appspotmail.com>
Signed-off-by: Pavel Skripkin <paskripkin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

527feae5

mlx4: Fix missing error code in mlx4_load_one() · ede4c938

Jiapeng Chong authored Jul 23, 2021

[ Upstream commit 7e4960b3

 ]

The error code is missing in this code scenario, add the error code
'-EINVAL' to the return value 'err'.

Eliminate the follow smatch warning:

drivers/net/ethernet/mellanox/mlx4/main.c:3538 mlx4_load_one() warn:
missing error code 'err'.

Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Fixes: 7ae0e400

 ("net/mlx4_core: Flexible (asymmetric) allocation of EQs and MSI-X vectors for PF/VFs")
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ede4c938

net: Set true network header for ECN decapsulation · acb97d4b

Gilad Naaman authored Jul 22, 2021

[ Upstream commit 227adfb2 ]

In cases where the header straight after the tunnel header was
another ethernet header (TEB), instead of the network header,
the ECN decapsulation code would treat the ethernet header as if
it was an IP header, resulting in mishandling and possible
wrong drops or corruption of the IP header.

In this case, ECT(1) is sent, so IP_ECN_decapsulate tries to copy it to the
inner IPv4 header, and correct its checksum.

The offset of the ECT bits in an IPv4 header corresponds to the
lower 2 bits of the second octet of the destination MAC address
in the ethernet header.
The IPv4 checksum corresponds to end of the source address.

In order to reproduce:

    $ ip netns add A
    $ ip netns add B
    $ ip -n A link add _v0 type veth peer name _v1 netns B
    $ ip -n A link set _v0 up
    $ ip -n A addr add dev _v0 10.254.3.1/24
    $ ip -n A route add default dev _v0 scope global
    $ ip -n B link set _v1 up
    $ ip -n B addr add dev _v1 10.254.1.6/24
    $ ip -n B route add default dev _v1 scope global
    $ ip -n B link add gre1 type gretap local 10.254.1.6 remote 10.254.3.1 key 0x49000000
    $ ip -n B link set gre1 up

    # Now send an IPv4/GRE/Eth/IPv4 frame where the outer header has ECT(1),
    # and the inner header has no ECT bits set:

    $ cat send_pkt.py
        #!/usr/bin/env python3
        from scapy.all import *

        pkt = IP(b'E\x01\x00\xa7\x00\x00\x00\x00@/`%\n\xfe\x03\x01\n\xfe\x01\x06 \x00eXI\x00'
                 b'\x00\x00\x18\xbe\x92\xa0\xee&\x18\xb0\x92\xa0l&\x08\x00E\x00\x00}\x8b\x85'
                 b'@\x00\x01\x01\xe4\xf2\x82\x82\x82\x01\x82\x82\x82\x02\x08\x00d\x11\xa6\xeb'
                 b'3\x1e\x1e\\xf3\\xf7`\x00\x00\x00\x00ZN\x00\x00\x00\x00\x00\x00\x10\x11\x12'
                 b'\x13\x14\x15\x16\x17\x18\x19\x1a\x1b\x1c\x1d\x1e\x1f !"#$%&\'()*+,-./01234'
                 b'56789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ')

        send(pkt)
    $ sudo ip netns exec B tcpdump -neqlllvi gre1 icmp & ; sleep 1
    $ sudo ip netns exec A python3 send_pkt.py

In the original packet, the source/destinatio MAC addresses are
dst=18:be:92:a0:ee:26 src=18:b0:92:a0:6c:26

In the received packet, they are
dst=18:bd:92:a0:ee:26 src=18:b0:92:a0:6c:27

Thanks to Lahav Schlesinger <lschlesinger@drivenets.com> and Isaac Garzon <isaac@speed.io>
for helping me pinpoint the origin.

Fixes: b7237487

 ("tunnel: Propagate ECT(1) when decapsulating as recommended by RFC6040")
Cc: David S. Miller <davem@davemloft.net>
Cc: Hideaki YOSHIFUJI <yoshfuji@linux-ipv6.org>
Cc: David Ahern <dsahern@kernel.org>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: Gilad Naaman <gnaaman@drivenets.com>
Acked-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

acb97d4b

tipc: fix sleeping in tipc accept routine · 851946a6

Hoang Le authored Jul 23, 2021

[ Upstream commit d237a7f1 ]

The release_sock() is blocking function, it would change the state
after sleeping. In order to evaluate the stated condition outside
the socket lock context, switch to use wait_woken() instead.

Fixes: 6398e23c

 ("tipc: standardize accept routine")
Acked-by: Jon Maloy <jmaloy@redhat.com>
Signed-off-by: Hoang Le <hoang.h.le@dektech.com.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

851946a6

i40e: Fix log TC creation failure when max num of queues is exceeded · 194b71d2

Jedrzej Jagielski authored Jun 18, 2021

[ Upstream commit ea52faae ]

Fix missing failed message if driver does not have enough queues to
complete TC command. Without this fix no message is displayed in dmesg.

Fixes: a9ce82f7

 ("i40e: Enable 'channel' mode in mqprio for TC configs")
Signed-off-by: Grzegorz Szczurek <grzegorzx.szczurek@intel.com>
Signed-off-by: Jedrzej Jagielski <jedrzej.jagielski@intel.com>
Tested-by: Imam Hassan Reza Biswas <imam.hassan.reza.biswas@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

194b71d2

i40e: Fix queue-to-TC mapping on Tx · 834af622

Jedrzej Jagielski authored Jun 02, 2021

[ Upstream commit 89ec1f08 ]

In SW DCB mode the packets sent receive incorrect UP tags. They are
constructed correctly and put into tx_ring, but UP is later remapped by
HW on the basis of TCTUPR register contents according to Tx queue
selected, and BW used is consistent with the new UP values. This is
caused by Tx queue selection in kernel not taking into account DCB
configuration. This patch fixes the issue by implementing the
ndo_select_queue NDO callback.

Fixes: fd0a05ce

 ("i40e: transmit, receive, and NAPI")
Signed-off-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com>
Signed-off-by: Jedrzej Jagielski <jedrzej.jagielski@intel.com>
Tested-by: Imam Hassan Reza Biswas <imam.hassan.reza.biswas@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

834af622

i40e: Fix firmware LLDP agent related warning · 74aea4b7

Arkadiusz Kubalewski authored May 21, 2021

[ Upstream commit 71d6fdba ]

Make warning meaningful for the user.

Previously the trace:
"Starting FW LLDP agent failed: error: I40E_ERR_ADMIN_QUEUE_ERROR, I40E_AQ_RC_EAGAIN"
was produced when user tried to start Firmware LLDP agent,
just after it was stopped with sequence:
ethtool --set-priv-flags <dev> disable-fw-lldp on
ethtool --set-priv-flags <dev> disable-fw-lldp off
(without any delay between the commands)
At that point the firmware is still processing stop command, the behavior
is expected.

Fixes: c1041d07

 ("i40e: Missing response checks in driver when starting/stopping FW LLDP")
Signed-off-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Signed-off-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com>
Tested-by: Imam Hassan Reza Biswas <imam.hassan.reza.biswas@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

74aea4b7

i40e: Fix logic of disabling queues · b2ab34e8

Arkadiusz Kubalewski authored Apr 29, 2021

[ Upstream commit 65662a8d ]

Correct the message flow between driver and firmware when disabling
queues.

Previously in case of PF reset (due to required reinit after reconfig),
the error like: "VSI seid 397 Tx ring 60 disable timeout" could show up
occasionally. The error was not a real issue of hardware or firmware,
it was caused by wrong sequence of messages invoked by the driver.

Fixes: 41c445ff

 ("i40e: main driver core")
Signed-off-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Signed-off-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com>
Tested-by: Tony Brelinski <tonyx.brelinski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

b2ab34e8

netfilter: nft_nat: allow to specify layer 4 protocol NAT only · 519582e4

Pablo Neira Ayuso authored Jul 20, 2021

[ Upstream commit a33f387e ]

nft_nat reports a bogus EAFNOSUPPORT if no layer 3 information is specified.

Fixes: d07db988

 ("netfilter: nf_tables: introduce nft_validate_register_load()")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

519582e4

netfilter: conntrack: adjust stop timestamp to real expiry value · 3a7a4cee

Florian Westphal authored Jul 18, 2021

[ Upstream commit 30a56a2b ]

In case the entry is evicted via garbage collection there is
delay between the timeout value and the eviction event.

This adjusts the stop value based on how much time has passed.

Fixes: b87a2f91

 ("netfilter: conntrack: add gc worker to remove timed-out entries")
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

3a7a4cee

cfg80211: Fix possible memory leak in function cfg80211_bss_update · 1c043783

Nguyen Dinh Phi authored Jun 28, 2021

commit f9a5c358

 upstream.

When we exceed the limit of BSS entries, this function will free the
new entry, however, at this time, it is the last door to access the
inputed ies, so these ies will be unreferenced objects and cause memory
leak.
Therefore we should free its ies before deallocating the new entry, beside
of dropping it from hidden_list.

Signed-off-by: Nguyen Dinh Phi <phind.uet@gmail.com>
Link: https://lore.kernel.org/r/20210628132334.851095-1-phind.uet@gmail.com


Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

1c043783

nfc: nfcsim: fix use after free during module unload · 6cf2abea

Krzysztof Kozlowski authored Jul 28, 2021

commit 5e7b30d2 upstream.

There is a use after free memory corruption during module exit:
 - nfcsim_exit()
  - nfcsim_device_free(dev0)
    - nfc_digital_unregister_device()
      This iterates over command queue and frees all commands,
    - dev->up = false
    - nfcsim_link_shutdown()
      - nfcsim_link_recv_wake()
        This wakes the sleeping thread nfcsim_link_recv_skb().

 - nfcsim_link_recv_skb()
   Wake from wait_event_interruptible_timeout(),
   call directly the deb->cb callback even though (dev->up == false),
   - digital_send_cmd_complete()
     Dereference of "struct digital_cmd" cmd which was freed earlier by
     nfc_digital_unregister_device().

This causes memory corruption shortly after (with unrelated stack
trace):

  nfc nfc0: NFC: nfcsim_recv_wq: Device is down
  llcp: nfc_llcp_recv: err -19
  nfc nfc1: NFC: nfcsim_recv_wq: Device is down
  BUG: unable to handle page fault for address: ffffffffffffffed
  Call Trace:
   fsnotify+0x54b/0x5c0
   __fsnotify_parent+0x1fe/0x300
   ? vfs_write+0x27c/0x390
   vfs_write+0x27c/0x390
   ksys_write+0x63/0xe0
   do_syscall_64+0x3b/0x90
   entry_SYSCALL_64_after_hwframe+0x44/0xae

KASAN report:

  BUG: KASAN: use-after-free in digital_send_cmd_complete+0x16/0x50
  Write of size 8 at addr ffff88800a05f720 by task kworker/0:2/71
  Workqueue: events nfcsim_recv_wq [nfcsim]
  Call Trace:
   dump_stack_lvl+0x45/0x59
   print_address_description.constprop.0+0x21/0x140
   ? digital_send_cmd_complete+0x16/0x50
   ? digital_send_cmd_complete+0x16/0x50
   kasan_report.cold+0x7f/0x11b
   ? digital_send_cmd_complete+0x16/0x50
   ? digital_dep_link_down+0x60/0x60
   digital_send_cmd_complete+0x16/0x50
   nfcsim_recv_wq+0x38f/0x3d5 [nfcsim]
   ? nfcsim_in_send_cmd+0x4a/0x4a [nfcsim]
   ? lock_is_held_type+0x98/0x110
   ? finish_wait+0x110/0x110
   ? rcu_read_lock_sched_held+0x9c/0xd0
   ? rcu_read_lock_bh_held+0xb0/0xb0
   ? lockdep_hardirqs_on_prepare+0x12e/0x1f0

This flow of calling digital_send_cmd_complete() callback on driver exit
is specific to nfcsim which implements reading and sending work queues.
Since the NFC digital device was unregistered, the callback should not
be called.

Fixes: 204bddcb

 ("NFC: nfcsim: Make use of the Digital layer")
Cc: <stable@vger.kernel.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6cf2abea

NIU: fix incorrect error return, missed in previous revert · 6b313d0f

Paul Jakma authored Jul 23, 2021

commit 15bbf8bb upstream.

Commit 7930742d, reverting 26fd962b, missed out on reverting an incorrect
change to a return value.  The niu_pci_vpd_scan_props(..) == 1 case appears
to be a normal path - treating it as an error and return -EINVAL was
breaking VPD_SCAN and causing the driver to fail to load.

Fix, so my Neptune card works again.

Cc: Kangjie Lu <kjlu@umn.edu>
Cc: Shannon Nelson <shannon.lee.nelson@gmail.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: stable <stable@vger.kernel.org>
Fixes: 7930742d

 ('Revert "niu: fix missing checks of niu_pci_eeprom_read"')
Signed-off-by: Paul Jakma <paul@jakma.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6b313d0f

HID: wacom: Re-enable touch by default for Cintiq 24HDT / 27QHDT · c4663c16

Jason Gerecke authored Jul 19, 2021

commit 6ca2350e upstream.

Commit 670e9092 ("HID: wacom: support named keys on older devices")
added support for sending named events from the soft buttons on the
24HDT and 27QHDT. In the process, however, it inadvertantly disabled the
touchscreen of the 24HDT and 27QHDT by default. The
`wacom_set_shared_values` function would normally enable touch by default
but because it checks the state of the non-shared `has_mute_touch_switch`
flag and `wacom_setup_touch_input_capabilities` sets the state of the
/shared/ version, touch ends up being disabled by default.

This patch sets the non-shared flag, letting `wacom_set_shared_values`
take care of copying the value over to the shared version and setting
the default touch state to "on".

Fixes: 670e9092

 ("HID: wacom: support named keys on older devices")
CC: stable@vger.kernel.org # 5.4+
Signed-off-by: Jason Gerecke <jason.gerecke@wacom.com>
Reviewed-by: Ping Cheng <ping.cheng@wacom.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

c4663c16

can: esd_usb2: fix memory leak · e9e2ce00

Pavel Skripkin authored Jul 27, 2021

commit 928150fa upstream.

In esd_usb2_setup_rx_urbs() MAX_RX_URBS coherent buffers are allocated
and there is nothing, that frees them:

1) In callback function the urb is resubmitted and that's all
2) In disconnect function urbs are simply killed, but URB_FREE_BUFFER
   is not set (see esd_usb2_setup_rx_urbs) and this flag cannot be used
   with coherent buffers.

So, all allocated buffers should be freed with usb_free_coherent()
explicitly.

Side note: This code looks like a copy-paste of other can drivers. The
same patch was applied to mcba_usb driver and it works nice with real
hardware. There is no change in functionality, only clean-up code for
coherent buffers.

Fixes: 96d8e903 ("can: Add driver for esd CAN-USB/2 device")
Link: https://lore.kernel.org/r/b31b096926dcb35998ad0271aac4b51770ca7cc8.1627404470.git.paskripkin@gmail.com


Cc: linux-stable <stable@vger.kernel.org>
Signed-off-by: Pavel Skripkin <paskripkin@gmail.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

e9e2ce00

can: ems_usb: fix memory leak · 43726620

Pavel Skripkin authored Jul 27, 2021

commit 9969e3c5 upstream.

In ems_usb_start() MAX_RX_URBS coherent buffers are allocated and
there is nothing, that frees them:

1) In callback function the urb is resubmitted and that's all
2) In disconnect function urbs are simply killed, but URB_FREE_BUFFER
   is not set (see ems_usb_start) and this flag cannot be used with
   coherent buffers.

So, all allocated buffers should be freed with usb_free_coherent()
explicitly.

Side note: This code looks like a copy-paste of other can drivers. The
same patch was applied to mcba_usb driver and it works nice with real
hardware. There is no change in functionality, only clean-up code for
coherent buffers.

Fixes: 702171ad ("ems_usb: Added support for EMS CPC-USB/ARM7 CAN/USB interface")
Link: https://lore.kernel.org/r/59aa9fbc9a8cbf9af2bbd2f61a659c480b415800.1627404470.git.paskripkin@gmail.com


Cc: linux-stable <stable@vger.kernel.org>
Signed-off-by: Pavel Skripkin <paskripkin@gmail.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

43726620

can: usb_8dev: fix memory leak · 81986738

Pavel Skripkin authored Jul 27, 2021

commit 0e865f0c upstream.

In usb_8dev_start() MAX_RX_URBS coherent buffers are allocated and
there is nothing, that frees them:

1) In callback function the urb is resubmitted and that's all
2) In disconnect function urbs are simply killed, but URB_FREE_BUFFER
   is not set (see usb_8dev_start) and this flag cannot be used with
   coherent buffers.

So, all allocated buffers should be freed with usb_free_coherent()
explicitly.

Side note: This code looks like a copy-paste of other can drivers. The
same patch was applied to mcba_usb driver and it works nice with real
hardware. There is no change in functionality, only clean-up code for
coherent buffers.

Fixes: 0024d8ad ("can: usb_8dev: Add support for USB2CAN interface from 8 devices")
Link: https://lore.kernel.org/r/d39b458cd425a1cf7f512f340224e6e9563b07bd.1627404470.git.paskripkin@gmail.com


Cc: linux-stable <stable@vger.kernel.org>
Signed-off-by: Pavel Skripkin <paskripkin@gmail.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

81986738

can: mcba_usb_start(): add missing urb->transfer_dma initialization · a051dbd1

Pavel Skripkin authored Jul 25, 2021

commit fc43fb69 upstream.

Yasushi reported, that his Microchip CAN Analyzer stopped working
since commit 91c02557 ("can: mcba_usb: fix memory leak in
mcba_usb"). The problem was in missing urb->transfer_dma
initialization.

In my previous patch to this driver I refactored mcba_usb_start() code
to avoid leaking usb coherent buffers. To archive it, I passed local
stack variable to usb_alloc_coherent() and then saved it to private
array to correctly free all coherent buffers on ->close() call. But I
forgot to initialize urb->transfer_dma with variable passed to
usb_alloc_coherent().

All of this was causing device to not work, since dma addr 0 is not
valid and following log can be found on bug report page, which points
exactly to problem described above.

| DMAR: [DMA Write] Request device [00:14.0] PASID ffffffff fault addr 0 [fault reason 05] PTE Write access is not set

Fixes: 91c02557 ("can: mcba_usb: fix memory leak in mcba_usb")
Link: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=990850
Link: https://lore.kernel.org/r/20210725103630.23864-1-paskripkin@gmail.com


Cc: linux-stable <stable@vger.kernel.org>
Reported-by: Yasushi SHOJI <yasushi.shoji@gmail.com>
Signed-off-by: Pavel Skripkin <paskripkin@gmail.com>
Tested-by: Yasushi SHOJI <yashi@spacecubics.com>
[mkl: fixed typos in commit message - thanks Yasushi SHOJI]
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

a051dbd1

can: raw: raw_setsockopt(): fix raw_rcv panic for sock UAF · 79358144

Ziyang Xuan authored Jul 22, 2021

commit 54f93336 upstream.

We get a bug during ltp can_filter test as following.

===========================================
[60919.264984] BUG: unable to handle kernel NULL pointer dereference at 0000000000000010
[60919.265223] PGD 8000003dda726067 P4D 8000003dda726067 PUD 3dda727067 PMD 0
[60919.265443] Oops: 0000 [#1] SMP PTI
[60919.265550] CPU: 30 PID: 3638365 Comm: can_filter Kdump: loaded Tainted: G        W         4.19.90+ #1
[60919.266068] RIP: 0010:selinux_socket_sock_rcv_skb+0x3e/0x200
[60919.293289] RSP: 0018:ffff8d53bfc03cf8 EFLAGS: 00010246
[60919.307140] RAX: 0000000000000000 RBX: 000000000000001d RCX: 0000000000000007
[60919.320756] RDX: 0000000000000001 RSI: ffff8d5104a8ed00 RDI: ffff8d53bfc03d30
[60919.334319] RBP: ffff8d9338056800 R08: ffff8d53bfc29d80 R09: 0000000000000001
[60919.347969] R10: ffff8d53bfc03ec0 R11: ffffb8526ef47c98 R12: ffff8d53bfc03d30
[60919.350320] perf: interrupt took too long (3063 > 2500), lowering kernel.perf_event_max_sample_rate to 65000
[60919.361148] R13: 0000000000000001 R14: ffff8d53bcf90000 R15: 0000000000000000
[60919.361151] FS:  00007fb78b6b3600(0000) GS:ffff8d53bfc00000(0000) knlGS:0000000000000000
[60919.400812] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[60919.413730] CR2: 0000000000000010 CR3: 0000003e3f784006 CR4: 00000000007606e0
[60919.426479] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[60919.439339] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[60919.451608] PKRU: 55555554
[60919.463622] Call Trace:
[60919.475617]  <IRQ>
[60919.487122]  ? update_load_avg+0x89/0x5d0
[60919.498478]  ? update_load_avg+0x89/0x5d0
[60919.509822]  ? account_entity_enqueue+0xc5/0xf0
[60919.520709]  security_sock_rcv_skb+0x2a/0x40
[60919.531413]  sk_filter_trim_cap+0x47/0x1b0
[60919.542178]  ? kmem_cache_alloc+0x38/0x1b0
[60919.552444]  sock_queue_rcv_skb+0x17/0x30
[60919.562477]  raw_rcv+0x110/0x190 [can_raw]
[60919.572539]  can_rcv_filter+0xbc/0x1b0 [can]
[60919.582173]  can_receive+0x6b/0xb0 [can]
[60919.591595]  can_rcv+0x31/0x70 [can]
[60919.600783]  __netif_receive_skb_one_core+0x5a/0x80
[60919.609864]  process_backlog+0x9b/0x150
[60919.618691]  net_rx_action+0x156/0x400
[60919.627310]  ? sched_clock_cpu+0xc/0xa0
[60919.635714]  __do_softirq+0xe8/0x2e9
[60919.644161]  do_softirq_own_stack+0x2a/0x40
[60919.652154]  </IRQ>
[60919.659899]  do_softirq.part.17+0x4f/0x60
[60919.667475]  __local_bh_enable_ip+0x60/0x70
[60919.675089]  __dev_queue_xmit+0x539/0x920
[60919.682267]  ? finish_wait+0x80/0x80
[60919.689218]  ? finish_wait+0x80/0x80
[60919.695886]  ? sock_alloc_send_pskb+0x211/0x230
[60919.702395]  ? can_send+0xe5/0x1f0 [can]
[60919.708882]  can_send+0xe5/0x1f0 [can]
[60919.715037]  raw_sendmsg+0x16d/0x268 [can_raw]

It's because raw_setsockopt() concurrently with
unregister_netdevice_many(). Concurrent scenario as following.

	cpu0						cpu1
raw_bind
raw_setsockopt					unregister_netdevice_many
						unlist_netdevice
dev_get_by_index				raw_notifier
raw_enable_filters				......
can_rx_register
can_rcv_list_find(..., net->can.rx_alldev_list)

......

sock_close
raw_release(sock_a)

......

can_receive
can_rcv_filter(net->can.rx_alldev_list, ...)
raw_rcv(skb, sock_a)
BUG

After unlist_netdevice(), dev_get_by_index() return NULL in
raw_setsockopt(). Function raw_enable_filters() will add sock
and can_filter to net->can.rx_alldev_list. Then the sock is closed.
Followed by, we sock_sendmsg() to a new vcan device use the same
can_filter. Protocol stack match the old receiver whose sock has
been released on net->can.rx_alldev_list in can_rcv_filter().
Function raw_rcv() uses the freed sock. UAF BUG is triggered.

We can find that the key issue is that net_device has not been
protected in raw_setsockopt(). Use rtnl_lock to protect net_device
in raw_setsockopt().

Fixes: c18ce101 ("[CAN]: Add raw protocol")
Link: https://lore.kernel.org/r/20210722070819.1048263-1-william.xuanziyang@huawei.com


Cc: linux-stable <stable@vger.kernel.org>
Signed-off-by: Ziyang Xuan <william.xuanziyang@huawei.com>
Acked-by: Oliver Hartkopp <socketcan@hartkopp.net>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

79358144

can: j1939: j1939_xtp_rx_dat_one(): fix rxtimer value between consecutive TP.DT to 750ms · c621638d

Zhang Changzhong authored Jul 06, 2021

commit c6eea1c8 upstream.

For receive side, the max time interval between two consecutive TP.DT
should be 750ms.

Fixes: 9d71dd0c ("can: add support of SAE J1939 protocol")
Link: https://lore.kernel.org/r/1625569210-47506-1-git-send-email-zhangchangzhong@huawei.com


Cc: linux-stable <stable@vger.kernel.org>
Signed-off-by: Zhang Changzhong <zhangchangzhong@huawei.com>
Acked-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

c621638d

ocfs2: issue zeroout to EOF blocks · a24d87b4

Junxiao Bi authored Jul 29, 2021

commit 9449ad33 upstream.

For punch holes in EOF blocks, fallocate used buffer write to zero the
EOF blocks in last cluster.  But since ->writepage will ignore EOF
pages, those zeros will not be flushed.

This "looks" ok as commit 6bba4471 ("ocfs2: fix data corruption by
fallocate") will zero the EOF blocks when extend the file size, but it
isn't.  The problem happened on those EOF pages, before writeback, those
pages had DIRTY flag set and all buffer_head in them also had DIRTY flag
set, when writeback run by write_cache_pages(), DIRTY flag on the page
was cleared, but DIRTY flag on the buffer_head not.

When next write happened to those EOF pages, since buffer_head already
had DIRTY flag set, it would not mark page DIRTY again.  That made
writeback ignore them forever.  That will cause data corruption.  Even
directio write can't work because it will fail when trying to drop pages
caches before direct io, as it found the buffer_head for those pages
still had DIRTY flag set, then it will fall back to buffer io mode.

To make a summary of the issue, as writeback ingores EOF pages, once any
EOF page is generated, any write to it will only go to the page cache,
it will never be flushed to disk even file size extends and that page is
not EOF page any more.  The fix is to avoid zero EOF blocks with buffer
write.

The following code snippet from qemu-img could trigger the corruption.

  656   open("6b3711ae-3306-4bdd-823c-cf1c0060a095.conv.2", O_RDWR|O_DIRECT|O_CLOEXEC) = 11
  ...
  660   fallocate(11, FALLOC_FL_KEEP_SIZE|FALLOC_FL_PUNCH_HOLE, 2275868672, 327680 <unfinished ...>
  660   fallocate(11, 0, 2275868672, 327680) = 0
  658   pwrite64(11, "

Link: https://lkml.kernel.org/r/20210722054923.24389-2-junxiao.bi@oracle.com


Signed-off-by: Junxiao Bi <junxiao.bi@oracle.com>
Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Changwei Ge <gechangwei@live.cn>
Cc: Gang He <ghe@suse.com>
Cc: Jun Piao <piaojun@huawei.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

a24d87b4

ocfs2: fix zero out valid data · eaaa4284

Junxiao Bi authored Jul 29, 2021

commit f267aeb6 upstream.

If append-dio feature is enabled, direct-io write and fallocate could
run in parallel to extend file size, fallocate used "orig_isize" to
record i_size before taking "ip_alloc_sem", when
ocfs2_zeroout_partial_cluster() zeroout EOF blocks, i_size maybe already
extended by ocfs2_dio_end_io_write(), that will cause valid data zeroed
out.

Link: https://lkml.kernel.org/r/20210722054923.24389-1-junxiao.bi@oracle.com
Fixes: 6bba4471

 ("ocfs2: fix data corruption by fallocate")
Signed-off-by: Junxiao Bi <junxiao.bi@oracle.com>
Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Cc: Changwei Ge <gechangwei@live.cn>
Cc: Gang He <ghe@suse.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Jun Piao <piaojun@huawei.com>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

eaaa4284

KVM: add missing compat KVM_CLEAR_DIRTY_LOG · 9bd10921

Paolo Bonzini authored Jul 27, 2021

commit 8750f9bb upstream.

The arguments to the KVM_CLEAR_DIRTY_LOG ioctl include a pointer,
therefore it needs a compat ioctl implementation.  Otherwise,
32-bit userspace fails to invoke it on 64-bit kernels; for x86
it might work fine by chance if the padding is zero, but not
on big-endian architectures.

Reported-by: Thomas Sattler
Cc: stable@vger.kernel.org
Fixes: 2a31b9db

 ("kvm: introduce manual dirty log reprotect")
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

9bd10921

x86/kvm: fix vcpu-id indexed array sizes · 7a94dfe5

Juergen Gross authored Jul 01, 2021

commit 76b4f357

 upstream.

KVM_MAX_VCPU_ID is the maximum vcpu-id of a guest, and not the number
of vcpu-ids. Fix array indexed by vcpu-id to have KVM_MAX_VCPU_ID+1
elements.

Note that this is currently no real problem, as KVM_MAX_VCPU_ID is
an odd number, resulting in always enough padding being available at
the end of those arrays.

Nevertheless this should be fixed in order to avoid rare problems in
case someone is using an even number for KVM_MAX_VCPU_ID.

Signed-off-by: Juergen Gross <jgross@suse.com>
Message-Id: <20210701154105.23215-2-jgross@suse.com>
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

7a94dfe5

Revert "ACPI: resources: Add checks for ACPI IRQ override" · 2dc29158

Hui Wang authored Jul 28, 2021

commit e0eef369 upstream.

The commit 0ec4e55e ("ACPI: resources: Add checks for ACPI IRQ
override") introduces regression on some platforms, at least it makes
the UART can't get correct irq setting on two different platforms,
and it makes the kernel can't bootup on these two platforms.

This reverts commit 0ec4e55e.

Regression-discuss: https://bugzilla.kernel.org/show_bug.cgi?id=213031


Reported-by: PGNd <pgnet.dev@gmail.com>
Cc: 5.4+ <stable@vger.kernel.org> # 5.4+
Signed-off-by: Hui Wang <hui.wang@canonical.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

2dc29158

btrfs: mark compressed range uptodate only if all bio succeed · a8eec697

Goldwyn Rodrigues authored Jul 09, 2021

commit 240246f6

 upstream.

In compression write endio sequence, the range which the compressed_bio
writes is marked as uptodate if the last bio of the compressed (sub)bios
is completed successfully. There could be previous bio which may
have failed which is recorded in cb->errors.

Set the writeback range as uptodate only if cb->errors is zero, as opposed
to checking only the last bio's status.

Backporting notes: in all versions up to 4.4 the last argument is always
replaced by "!cb->errors".

CC: stable@vger.kernel.org # 4.4+
Signed-off-by: Goldwyn Rodrigues <rgoldwyn@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

a8eec697

btrfs: fix rw device counting in __btrfs_free_extra_devids · 57429c1e

Desmond Cheong Zhi Xi authored Jul 27, 2021

commit b2a61667 upstream.

When removing a writeable device in __btrfs_free_extra_devids, the rw
device count should be decremented.

This error was caught by Syzbot which reported a warning in
close_fs_devices:

  WARNING: CPU: 1 PID: 9355 at fs/btrfs/volumes.c:1168 close_fs_devices+0x763/0x880 fs/btrfs/volumes.c:1168
  Modules linked in:
  CPU: 0 PID: 9355 Comm: syz-executor552 Not tainted 5.13.0-rc1-syzkaller #0
  Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
  RIP: 0010:close_fs_devices+0x763/0x880 fs/btrfs/volumes.c:1168
  RSP: 0018:ffffc9000333f2f0 EFLAGS: 00010293
  RAX: ffffffff8365f5c3 RBX: 0000000000000001 RCX: ffff888029afd4c0
  RDX: 0000000000000000 RSI: 0000000000000001 RDI: 0000000000000000
  RBP: ffff88802846f508 R08: ffffffff8365f525 R09: ffffed100337d128
  R10: ffffed100337d128 R11: 0000000000000000 R12: dffffc0000000000
  R13: ffff888019be8868 R14: 1ffff1100337d10d R15: 1ffff1100337d10a
  FS:  00007f6f53828700(0000) GS:ffff8880b9a00000(0000) knlGS:0000000000000000
  CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
  CR2: 000000000047c410 CR3: 00000000302a6000 CR4: 00000000001506f0
  DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
  DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
  Call Trace:
   btrfs_close_devices+0xc9/0x450 fs/btrfs/volumes.c:1180
   open_ctree+0x8e1/0x3968 fs/btrfs/disk-io.c:3693
   btrfs_fill_super fs/btrfs/super.c:1382 [inline]
   btrfs_mount_root+0xac5/0xc60 fs/btrfs/super.c:1749
   legacy_get_tree+0xea/0x180 fs/fs_context.c:592
   vfs_get_tree+0x86/0x270 fs/super.c:1498
   fc_mount fs/namespace.c:993 [inline]
   vfs_kern_mount+0xc9/0x160 fs/namespace.c:1023
   btrfs_mount+0x3d3/0xb50 fs/btrfs/super.c:1809
   legacy_get_tree+0xea/0x180 fs/fs_context.c:592
   vfs_get_tree+0x86/0x270 fs/super.c:1498
   do_new_mount fs/namespace.c:2905 [inline]
   path_mount+0x196f/0x2be0 fs/namespace.c:3235
   do_mount fs/namespace.c:3248 [inline]
   __do_sys_mount fs/namespace.c:3456 [inline]
   __se_sys_mount+0x2f9/0x3b0 fs/namespace.c:3433
   do_syscall_64+0x3f/0xb0 arch/x86/entry/common.c:47
   entry_SYSCALL_64_after_hwframe+0x44/0xae

Because fs_devices->rw_devices was not 0 after
closing all devices. Here is the call trace that was observed:

  btrfs_mount_root():
    btrfs_scan_one_device():
      device_list_add();   <---------------- device added
    btrfs_open_devices():
      open_fs_devices():
        btrfs_open_one_device();   <-------- writable device opened,
	                                     rw device count ++
    btrfs_fill_super():
      open_ctree():
        btrfs_free_extra_devids():
	  __btrfs_free_extra_devids();  <--- writable device removed,
	                              rw device count not decremented
	  fail_tree_roots:
	    btrfs_close_devices():
	      close_fs_devices();   <------- rw device count off by 1

As a note, prior to commit cf89af14 ("btrfs: dev-replace: fail
mount if we don't have replace item with target device"), rw_devices
was decremented on removing a writable device in
__btrfs_free_extra_devids only if the BTRFS_DEV_STATE_REPLACE_TGT bit
was not set for the device. However, this check does not need to be
reinstated as it is now redundant and incorrect.

In __btrfs_free_extra_devids, we skip removing the device if it is the
target for replacement. This is done by checking whether device->devid
== BTRFS_DEV_REPLACE_DEVID. Since BTRFS_DEV_STATE_REPLACE_TGT is set
only on the device with devid BTRFS_DEV_REPLACE_DEVID, no devices
should have the BTRFS_DEV_STATE_REPLACE_TGT bit set after the check,
and so it's redundant to test for that bit.

Additionally, following commit 82372bc8

 ("Btrfs: make
the logic of source device removing more clear"), rw_devices is
incremented whenever a writeable device is added to the alloc
list (including the target device in btrfs_dev_replace_finishing), so
all removals of writable devices from the alloc list should also be
accompanied by a decrement to rw_devices.

Reported-by:  <syzbot+a70e2ad0879f160b9217@syzkaller.appspotmail.com>
Fixes: cf89af14

 ("btrfs: dev-replace: fail mount if we don't have replace item with target device")
CC: stable@vger.kernel.org # 5.10+
Tested-by:  <syzbot+a70e2ad0879f160b9217@syzkaller.appspotmail.com>
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: Desmond Cheong Zhi Xi <desmondcheongzx@gmail.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

57429c1e

x86/asm: Ensure asm/proto.h can be included stand-alone · 61f2cbc7

Jan Kiszka authored Apr 11, 2021

[ Upstream commit f7b21a0e

 ]

Fix:

  ../arch/x86/include/asm/proto.h:14:30: warning: ‘struct task_struct’ declared \
    inside parameter list will not be visible outside of this definition or declaration
  long do_arch_prctl_64(struct task_struct *task, int option, unsigned long arg2);
                               ^~~~~~~~~~~

  .../arch/x86/include/asm/proto.h:40:34: warning: ‘struct task_struct’ declared \
    inside parameter list will not be visible outside of this definition or declaration
   long do_arch_prctl_common(struct task_struct *task, int option,
                                    ^~~~~~~~~~~

if linux/sched.h hasn't be included previously. This fixes a build error
when this header is used outside of the kernel tree.

 [ bp: Massage commit message. ]

Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/b76b4be3-cf66-f6b2-9a6c-3e7ef54f9845@web.de


Signed-off-by: Sasha Levin <sashal@kernel.org>

61f2cbc7

net_sched: check error pointer in tcf_dump_walker() · 99372c38

Cong Wang authored Oct 02, 2020

[ Upstream commit 580e4273

 ]

Although we take RTNL on dump path, it is possible to
skip RTNL on insertion path. So the following race condition
is possible:

rtnl_lock()		// no rtnl lock
			mutex_lock(&idrinfo->lock);
			// insert ERR_PTR(-EBUSY)
			mutex_unlock(&idrinfo->lock);
tc_dump_action()
rtnl_unlock()

So we have to skip those temporary -EBUSY entries on dump path
too.

Reported-and-tested-by:  <syzbot+b47bc4f247856fb4d9e1@syzkaller.appspotmail.com>
Fixes: 0fedc63f

 ("net_sched: commit action insertions together")
Cc: Vlad Buslov <vladbu@mellanox.com>
Cc: Jamal Hadi Salim <jhs@mojatatu.com>
Cc: Jiri Pirko <jiri@resnulli.us>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

99372c38

Jul 31, 2021

Linux 5.4.137 · 5b1de8e1

Greg Kroah-Hartman authored Jul 31, 2021

Link: https://lore.kernel.org/r/20210729135142.920143237@linuxfoundation.org


Tested-by: Jon Hunter <jonathanh@nvidia.com>
Tested-by: Florian Fainelli <f.fainelli@gmail.com>
Tested-by: Shuah Khan <skhan@linuxfoundation.org>
Tested-by: Linux Kernel Functional Testing <lkft@linaro.org>
Tested-by: Sudip Mukherjee <sudip.mukherjee@codethink.co.uk>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

v5.4.137

5b1de8e1

ipv6: ip6_finish_output2: set sk into newly allocated nskb · ebb1b38b

Vasily Averin authored Jul 19, 2021

[ Upstream commit 2d85a1b3 ]

skb_set_owner_w() should set sk not to old skb but to new nskb.

Fixes: 5796015f

 ("ipv6: allocate enough headroom in ip6_finish_output2()")
Signed-off-by: Vasily Averin <vvs@virtuozzo.com>
Link: https://lore.kernel.org/r/70c0744f-89ae-1869-7e3e-4fa292158f4b@virtuozzo.com


Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ebb1b38b

ARM: dts: versatile: Fix up interrupt controller node names · 6c041239

Sudeep Holla authored Jul 01, 2021

[ Upstream commit 82a1c675

 ]

Once the new schema interrupt-controller/arm,vic.yaml is added, we get
the below warnings:

        arch/arm/boot/dts/versatile-ab.dt.yaml:
        intc@10140000: $nodename:0: 'intc@10140000' does not match
        '^interrupt-controller(@[0-9a-f,]+)*$'

	arch/arm/boot/dts/versatile-ab.dt.yaml:
	intc@10140000: 'clear-mask' does not match any of the regexes

Fix the node names for the interrupt controller to conform
to the standard node name interrupt-controller@.. Also drop invalid
clear-mask property.

Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20210701132118.759454-1-sudeep.holla@arm.com

'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

6c041239

iomap: remove the length variable in iomap_seek_hole · befa9005

Christoph Hellwig authored Jul 15, 2021

[ Upstream commit 49694d14

 ]

The length variable is rather pointless given that it can be trivially
deduced from offset and size.  Also the initial calculation can lead
to KASAN warnings.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reported-by: Leizhen (ThunderTown) <thunder.leizhen@huawei.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

befa9005

iomap: remove the length variable in iomap_seek_data · 83fb41b2

Christoph Hellwig authored Jul 15, 2021

[ Upstream commit 3ac1d426

 ]

The length variable is rather pointless given that it can be trivially
deduced from offset and size.  Also the initial calculation can lead
to KASAN warnings.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reported-by: Leizhen (ThunderTown) <thunder.leizhen@huawei.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

83fb41b2

cifs: fix the out of range assignment to bit fields in parse_server_interfaces · 302e1acd

Hyunchul Lee authored Jul 12, 2021

[ Upstream commit c9c9c681

 ]

Because the out of range assignment to bit fields
are compiler-dependant, the fields could have wrong
value.

Signed-off-by: Hyunchul Lee <hyc.lee@gmail.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

302e1acd

firmware: arm_scmi: Fix range check for the maximum number of pending messages · 02a470e3

Cristian Marussi authored Jul 12, 2021

[ Upstream commit bdb8742d ]

SCMI message headers carry a sequence number and such field is sized to
allow for MSG_TOKEN_MAX distinct numbers; moreover zero is not really an
acceptable maximum number of pending in-flight messages.

Fix accordingly the checks performed on the value exported by transports
in scmi_desc.max_msg

Link: https://lore.kernel.org/r/20210712141833.6628-3-cristian.marussi@arm.com


Reported-by: Vincent Guittot <vincent.guittot@linaro.org>
Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
[sudeep.holla: updated the patch title and error message]
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

02a470e3

firmware: arm_scmi: Fix possible scmi_linux_errmap buffer overflow · 289dd584

Sudeep Holla authored Jul 07, 2021

[ Upstream commit 7a691f16 ]

The scmi_linux_errmap buffer access index is supposed to depend on the
array size to prevent element out of bounds access. It uses SCMI_ERR_MAX
to check bounds but that can mismatch with the array size. It also
changes the success into -EIO though scmi_linux_errmap is never used in
case of success, it is expected to work for success case too.

It is slightly confusing code as the negative of the error code
is used as index to the buffer. Fix it by negating it at the start and
make it more readable.

Link: https://lore.kernel.org/r/20210707135028.1869642-1-sudeep.holla@arm.com


Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Cristian Marussi <cristian.marussi@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

289dd584

hfs: add lock nesting notation to hfs_find_init · e3acb292

Desmond Cheong Zhi Xi authored Jul 14, 2021

[ Upstream commit b3b2177a ]

Syzbot reports a possible recursive lock in [1].

This happens due to missing lock nesting information.  From the logs, we
see that a call to hfs_fill_super is made to mount the hfs filesystem.
While searching for the root inode, the lock on the catalog btree is
grabbed.  Then, when the parent of the root isn't found, a call to
__hfs_bnode_create is made to create the parent of the root.  This
eventually leads to a call to hfs_ext_read_extent which grabs a lock on
the extents btree.

Since the order of locking is catalog btree -> extents btree, this lock
hierarchy does not lead to a deadlock.

To tell lockdep that this locking is safe, we add nesting notation to
distinguish between catalog btrees, extents btrees, and attributes
btrees (for HFS+).  This has already been done in hfsplus.

Link: https://syzkaller.appspot.com/bug?id=f007ef1d7a31a469e3be7aeb0fde0769b18585db [1]
Link: https://lkml.kernel.org/r/20210701030756.58760-4-desmondcheongzx@gmail.com


Signed-off-by: Desmond Cheong Zhi Xi <desmondcheongzx@gmail.com>
Reported-by:  <syzbot+b718ec84a87b7e73ade4@syzkaller.appspotmail.com>
Tested-by:  <syzbot+b718ec84a87b7e73ade4@syzkaller.appspotmail.com>
Reviewed-by: Viacheslav Dubeyko <slava@dubeyko.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Gustavo A. R. Silva <gustavoars@kernel.org>
Cc: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

e3acb292

hfs: fix high memory mapping in hfs_bnode_read · af117829

Desmond Cheong Zhi Xi authored Jul 14, 2021

[ Upstream commit 54a5ead6 ]

Pages that we read in hfs_bnode_read need to be kmapped into kernel
address space.  However, currently only the 0th page is kmapped.  If the
given offset + length exceeds this 0th page, then we have an invalid
memory access.

To fix this, we kmap relevant pages one by one and copy their relevant
portions of data.

An example of invalid memory access occurring without this fix can be seen
in the following crash report:

  ==================================================================
  BUG: KASAN: use-after-free in memcpy include/linux/fortify-string.h:191 [inline]
  BUG: KASAN: use-after-free in hfs_bnode_read+0xc4/0xe0 fs/hfs/bnode.c:26
  Read of size 2 at addr ffff888125fdcffe by task syz-executor5/4634

  CPU: 0 PID: 4634 Comm: syz-executor5 Not tainted 5.13.0-syzkaller #0
  Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
  Call Trace:
   __dump_stack lib/dump_stack.c:79 [inline]
   dump_stack+0x195/0x1f8 lib/dump_stack.c:120
   print_address_description.constprop.0+0x1d/0x110 mm/kasan/report.c:233
   __kasan_report mm/kasan/report.c:419 [inline]
   kasan_report.cold+0x7b/0xd4 mm/kasan/report.c:436
   check_region_inline mm/kasan/generic.c:180 [inline]
   kasan_check_range+0x154/0x1b0 mm/kasan/generic.c:186
   memcpy+0x24/0x60 mm/kasan/shadow.c:65
   memcpy include/linux/fortify-string.h:191 [inline]
   hfs_bnode_read+0xc4/0xe0 fs/hfs/bnode.c:26
   hfs_bnode_read_u16 fs/hfs/bnode.c:34 [inline]
   hfs_bnode_find+0x880/0xcc0 fs/hfs/bnode.c:365
   hfs_brec_find+0x2d8/0x540 fs/hfs/bfind.c:126
   hfs_brec_read+0x27/0x120 fs/hfs/bfind.c:165
   hfs_cat_find_brec+0x19a/0x3b0 fs/hfs/catalog.c:194
   hfs_fill_super+0xc13/0x1460 fs/hfs/super.c:419
   mount_bdev+0x331/0x3f0 fs/super.c:1368
   hfs_mount+0x35/0x40 fs/hfs/super.c:457
   legacy_get_tree+0x10c/0x220 fs/fs_context.c:592
   vfs_get_tree+0x93/0x300 fs/super.c:1498
   do_new_mount fs/namespace.c:2905 [inline]
   path_mount+0x13f5/0x20e0 fs/namespace.c:3235
   do_mount fs/namespace.c:3248 [inline]
   __do_sys_mount fs/namespace.c:3456 [inline]
   __se_sys_mount fs/namespace.c:3433 [inline]
   __x64_sys_mount+0x2b8/0x340 fs/namespace.c:3433
   do_syscall_64+0x37/0xc0 arch/x86/entry/common.c:47
   entry_SYSCALL_64_after_hwframe+0x44/0xae
  RIP: 0033:0x45e63a
  Code: 48 c7 c2 bc ff ff ff f7 d8 64 89 02 b8 ff ff ff ff eb d2 e8 88 04 00 00 0f 1f 84 00 00 00 00 00 49 89 ca b8 a5 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 bc ff ff ff f7 d8 64 89 01 48
  RSP: 002b:00007f9404d410d8 EFLAGS: 00000246 ORIG_RAX: 00000000000000a5
  RAX: ffffffffffffffda RBX: 0000000020000248 RCX: 000000000045e63a
  RDX: 0000000020000000 RSI: 0000000020000100 RDI: 00007f9404d41120
  RBP: 00007f9404d41120 R08: 00000000200002c0 R09: 0000000020000000
  R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000003
  R13: 0000000000000003 R14: 00000000004ad5d8 R15: 0000000000000000

  The buggy address belongs to the page:
  page:00000000dadbcf3e refcount:0 mapcount:0 mapping:0000000000000000 index:0x1 pfn:0x125fdc
  flags: 0x2fffc0000000000(node=0|zone=2|lastcpupid=0x3fff)
  raw: 02fffc0000000000 ffffea000497f748 ffffea000497f6c8 0000000000000000
  raw: 0000000000000001 0000000000000000 00000000ffffffff 0000000000000000
  page dumped because: kasan: bad access detected

  Memory state around the buggy address:
   ffff888125fdce80: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
   ffff888125fdcf00: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
  >ffff888125fdcf80: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
                                                                  ^
   ffff888125fdd000: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
   ffff888125fdd080: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
  ==================================================================

Link: https://lkml.kernel.org/r/20210701030756.58760-3-desmondcheongzx@gmail.com


Signed-off-by: Desmond Cheong Zhi Xi <desmondcheongzx@gmail.com>
Reviewed-by: Viacheslav Dubeyko <slava@dubeyko.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Gustavo A. R. Silva <gustavoars@kernel.org>
Cc: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

af117829