- Nov 02, 2019
-
-
Eric Dumazet authored
Historically linux tried to stick to RFC 791, 1122, 2003 for IPv4 ID field generation. RFC 6864 made clear that no matter how hard we try, we can not ensure unicity of IP ID within maximum lifetime for all datagrams with a given source address/destination address/protocol tuple. Linux uses a per socket inet generator (inet_id), initialized at connection startup with a XOR of 'jiffies' and other fields that appear clear on the wire. Thiemo Nagel pointed that this strategy is a privacy concern as this provides 16 bits of entropy to fingerprint devices. Let's switch to a random starting point, this is just as good as far as RFC 6864 is concerned and does not leak anything critical. Fixes: 1da177e4 ("Linux-2.6.12-rc2") Signed-off-by:
Eric Dumazet <edumazet@google.com> Reported-by:
Thiemo Nagel <tnagel@google.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/net-queueDavid S. Miller authored
Jeff Kirsher says: ==================== Intel Wired LAN Driver Updates 2019-11-01 This series contains updates to e1000, igb, igc, ixgbe, i40e and driver documentation. Lyude Paul fixes an issue where a fatal read error occurs when the device is unplugged from the machine. So change the read error into a warn while the device is still present. Manfred Rudigier found that the i350 device was not apart of the "Media Auto Sense" feature, yet the device supports it. So add the missing i350 device to the check and fix an issue where the media auto sense would flip/flop when no cable was connected to the port causing spurious kernel log messages. I fixed an issue where the fix to resolve receive buffer starvation was applied in more than one place in the driver, one being the incorrect location in the i40e driver. Wenwen Wang fixes a potential memory leak in e1000 where allocated memory is not properly cleaned up in one of the error paths. Jonathan Neuschäfer cleans up the driver documentation to be consistent and remove the footnote reference, since the footnote no longer exists in the documentation. Igor Pylypiv cleans up a duplicate clearing of a bit, no need to clear it twice. v2: Fixed alignment issue in patch 3 of the series based on community feedback. ==================== Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Igor Pylypiv authored
__IXGBE_RX_BUILD_SKB_ENABLED bit is already cleared. Signed-off-by:
Igor Pylypiv <igor.pylypiv@gmail.com> Tested-by:
Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by:
Jeff Kirsher <jeffrey.t.kirsher@intel.com>
-
Jonathan Neuschäfer authored
These asterisks were once references to a line that said: "* Other names and brands may be claimed as the property of others." But now, they serve no purpose; they can only irritate the reader. Fixes: de3edab4 ("e1000: update README for e1000") Fixes: a3fb6568 ("e100.txt: Cleanup license info in kernel doc") Fixes: da8c01c4 ("e1000e.txt: Add e1000e documentation") Fixes: f12a84a9 ("Documentation: fm10k: Add kernel documentation") Fixes: b55c52b1 ("igb.txt: Add igb documentation") Fixes: c4e9b56e ("igbvf.txt: Add igbvf Documentation") Fixes: d7064f4c ("Documentation/networking/: Update Intel wired LAN driver documentation") Fixes: c4b8c011 ("ixgbevf.txt: Update ixgbevf documentation") Fixes: 1e06edcc ("Documentation: i40e: Prepare documentation for RST conversion") Fixes: 105bf2fe ("i40evf: add driver to kernel build system") Fixes: 1fae869b ("Documentation: ice: Prepare documentation for RST conversion") Fixes: df69ba43 ("ionic: Add basic framework for IONIC Network device driver") Signed-off-by:
Jonathan Neuschäfer <j.neuschaefer@gmx.net> Tested-by:
Aaron Brown <aaron.f.brown@intel.com> Signed-off-by:
Jeff Kirsher <jeffrey.t.kirsher@intel.com>
-
Wenwen Wang authored
In e1000_set_ringparam(), 'tx_old' and 'rx_old' are not deallocated if e1000_up() fails, leading to memory leaks. Refactor the code to fix this issue. Signed-off-by:
Wenwen Wang <wenwen@cs.uga.edu> Tested-by:
Aaron Brown <aaron.f.brown@intel.com> Signed-off-by:
Jeff Kirsher <jeffrey.t.kirsher@intel.com>
-
Jeff Kirsher authored
Magnus's fix to resolve a potential receive buffer starvation for AF_XDP got applied to both the i40e_xsk_umem_enable/disable() functions, when it should have only been applied to the "enable". So clean up the undesired code in the disable function. CC: Magnus Karlsson <magnus.karlsson@intel.com> Fixes: 1f459bdc ("i40e: fix potential RX buffer starvation for AF_XDP") Signed-off-by:
Jeff Kirsher <jeffrey.t.kirsher@intel.com> Tested-by:
Andrew Bowers <andrewx.bowers@intel.com>
-
Manfred Rudigier authored
At least on the i350 there is an annoying behavior that is maybe also present on 82580 devices, but was probably not noticed yet as MAS is not widely used. If no cable is connected on both fiber/copper ports the media auto sense code will constantly swap between them as part of the watchdog task and produce many unnecessary kernel log messages. The swap code responsible for this behavior (switching to fiber) should not be executed if the current media type is copper and there is no signal detected on the fiber port. In this case we can safely wait until the AUTOSENSE_EN bit is cleared. Signed-off-by:
Manfred Rudigier <manfred.rudigier@omicronenergy.com> Tested-by:
Aaron Brown <aaron.f.brown@intel.com> Signed-off-by:
Jeff Kirsher <jeffrey.t.kirsher@intel.com>
-
David S. Miller authored
Merge tag 'wireless-drivers-2019-11-01' of git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers Kalle Valo says: ==================== wireless-drivers fixes for 5.4 Third set of fixes for 5.4. Most of them are for iwlwifi but important fixes also for rtlwifi and mt76, the overflow fix for rtlwifi being most important. iwlwifi * fix merge damage on earlier patch * various fixes to device id handling * fix scan config command handling which caused firmware asserts rtlwifi * fix overflow on P2P IE handling * don't deliver too small frames to mac80211 mt76 * disable PCIE_ASPM * fix buffer DMA unmap on certain cases ==================== Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Chuhong Yuan authored
The remove misses to disable and unprepare priv->macclk like what is done when probe fails. Add the missed call in remove. Signed-off-by:
Chuhong Yuan <hslester96@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
- Nov 01, 2019
-
-
Manfred Rudigier authored
This patch enables the hardware feature "Media Auto Sense" also on the i350. It works in the same way as on the 82850 devices. Hardware designs using dual PHYs (fiber/copper) can enable this feature by setting the MAS enable bits in the NVM_COMPAT register (0x03) in the EEPROM. Signed-off-by:
Manfred Rudigier <manfred.rudigier@omicronenergy.com> Tested-by:
Aaron Brown <aaron.f.brown@intel.com> Signed-off-by:
Jeff Kirsher <jeffrey.t.kirsher@intel.com>
-
Lyude Paul authored
Fatal read errors are worth warning about, unless of course the device was just unplugged from the machine - something that's a rather normal occurrence when the igb/igc adapter is located on a Thunderbolt dock. So, let's only WARN() if there's a fatal read error while the device is still present. This fixes the following WARN splat that's been appearing whenever I unplug my Caldigit TS3 Thunderbolt dock from my laptop: igb 0000:09:00.0 enp9s0: PCIe link lost ------------[ cut here ]------------ igb: Failed to read reg 0x18! WARNING: CPU: 7 PID: 516 at drivers/net/ethernet/intel/igb/igb_main.c:756 igb_rd32+0x57/0x6a [igb] Modules linked in: igb dca thunderbolt fuse vfat fat elan_i2c mei_wdt mei_hdcp i915 wmi_bmof intel_wmi_thunderbolt iTCO_wdt iTCO_vendor_support x86_pkg_temp_thermal intel_powerclamp joydev coretemp crct10dif_pclmul crc32_pclmul i2c_algo_bit ghash_clmulni_intel intel_cstate drm_kms_helper intel_uncore syscopyarea sysfillrect sysimgblt fb_sys_fops intel_rapl_perf intel_xhci_usb_role_switch mei_me drm roles idma64 i2c_i801 ucsi_acpi typec_ucsi mei intel_lpss_pci processor_thermal_device typec intel_pch_thermal intel_soc_dts_iosf intel_lpss int3403_thermal thinkpad_acpi wmi int340x_thermal_zone ledtrig_audio int3400_thermal acpi_thermal_rel acpi_pad video pcc_cpufreq ip_tables serio_raw nvme nvme_core crc32c_intel uas usb_storage e1000e i2c_dev CPU: 7 PID: 516 Comm: kworker/u16:3 Not tainted 5.2.0-rc1Lyude-Test+ #14 Hardware name: LENOVO 20L8S2N800/20L8S2N800, BIOS N22ET35W (1.12 ) 04/09/2018 Workqueue: kacpi_hotplug acpi_hotplug_work_fn RIP: 0010:igb_rd32+0x57/0x6a [igb] Code: 87 b8 fc ff ff 48 c7 47 08 00 00 00 00 48 c7 c6 33 42 9b c0 4c 89 c7 e8 47 45 cd dc 89 ee 48 c7 c7 43 42 9b c0 e8 c1 94 71 dc <0f> 0b eb 08 8b 00 ff c0 75 b0 eb c8 44 89 e0 5d 41 5c c3 0f 1f 44 RSP: 0018:ffffba5801cf7c48 EFLAGS: 00010286 RAX: 0000000000000000 RBX: ffff9e7956608840 RCX: 0000000000000007 RDX: 0000000000000000 RSI: ffffba5801cf7b24 RDI: ffff9e795e3d6a00 RBP: 0000000000000018 R08: 000000009dec4a01 R09: ffffffff9e61018f R10: 0000000000000000 R11: ffffba5801cf7ae5 R12: 00000000ffffffff R13: ffff9e7956608840 R14: ffff9e795a6f10b0 R15: 0000000000000000 FS: 0000000000000000(0000) GS:ffff9e795e3c0000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000564317bc4088 CR3: 000000010e00a006 CR4: 00000000003606e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: igb_release_hw_control+0x1a/0x30 [igb] igb_remove+0xc5/0x14b [igb] pci_device_remove+0x3b/0x93 device_release_driver_internal+0xd7/0x17e pci_stop_bus_device+0x36/0x75 pci_stop_bus_device+0x66/0x75 pci_stop_bus_device+0x66/0x75 pci_stop_and_remove_bus_device+0xf/0x19 trim_stale_devices+0xc5/0x13a ? __pm_runtime_resume+0x6e/0x7b trim_stale_devices+0x103/0x13a ? __pm_runtime_resume+0x6e/0x7b trim_stale_devices+0x103/0x13a acpiphp_check_bridge+0xd8/0xf5 acpiphp_hotplug_notify+0xf7/0x14b ? acpiphp_check_bridge+0xf5/0xf5 acpi_device_hotplug+0x357/0x3b5 acpi_hotplug_work_fn+0x1a/0x23 process_one_work+0x1a7/0x296 worker_thread+0x1a8/0x24c ? process_scheduled_works+0x2c/0x2c kthread+0xe9/0xee ? kthread_destroy_worker+0x41/0x41 ret_from_fork+0x35/0x40 ---[ end trace 252bf10352c63d22 ]--- Signed-off-by:
Lyude Paul <lyude@redhat.com> Fixes: 47e16692 ("igb/igc: warn when fatal read failure happens") Acked-by:
Sasha Neftin <sasha.neftin@intel.com> Tested-by:
Aaron Brown <aaron.f.brown@intel.com> Acked-by:
Feng Tang <feng.tang@intel.com> Signed-off-by:
Jeff Kirsher <jeffrey.t.kirsher@intel.com>
-
Eric Dumazet authored
tcp_max_syn_backlog default value depends on memory size and TCP ehash size. Before this patch, the max value was 2048 [1], which is considered too small nowadays. Increase it to 4096 to match the recent SOMAXCONN change. [1] This is with TCP ehash size being capped to 524288 buckets. Signed-off-by:
Eric Dumazet <edumazet@google.com> Cc: Willy Tarreau <w@1wt.eu> Cc: Yue Cao <ycao009@ucr.edu> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Eric Dumazet authored
SOMAXCONN is /proc/sys/net/core/somaxconn default value. It has been defined as 128 more than 20 years ago. Since it caps the listen() backlog values, the very small value has caused numerous problems over the years, and many people had to raise it on their hosts after beeing hit by problems. Google has been using 1024 for at least 15 years, and we increased this to 4096 after TCP listener rework has been completed, more than 4 years ago. We got no complain of this change breaking any legacy application. Many applications indeed setup a TCP listener with listen(fd, -1); meaning they let the system select the backlog. Raising SOMAXCONN lowers chance of the port being unavailable under even small SYNFLOOD attack, and reduces possibilities of side channel vulnerabilities. Signed-off-by:
Eric Dumazet <edumazet@google.com> Cc: Willy Tarreau <w@1wt.eu> Cc: Yue Cao <ycao009@ucr.edu> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Ido Schimmel authored
Commit da58f90f ("netdevsim: Add devlink-trap support") added delayed work to netdevsim that periodically iterates over the registered netdevsim ports and reports various packet traps via devlink. While the delayed work takes the 'port_list_lock' mutex to protect against concurrent addition / deletion of ports, during device creation / dismantle ports are added / deleted without this lock, which can result in a use-after-free [1]. Fix this by making sure that the ports list is always modified under the lock. [1] [ 59.205543] ================================================================== [ 59.207748] BUG: KASAN: use-after-free in nsim_dev_trap_report_work+0xa67/0xad0 [ 59.210247] Read of size 8 at addr ffff8883cbdd3398 by task kworker/3:1/38 [ 59.212584] [ 59.213148] CPU: 3 PID: 38 Comm: kworker/3:1 Not tainted 5.4.0-rc3-custom-16119-ge6abb5f0261e #2013 [ 59.215896] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS ?-20180724_192412-buildhw-07.phx2.fedoraproject.org-1.fc29 04/01/2014 [ 59.218384] Workqueue: events nsim_dev_trap_report_work [ 59.219428] Call Trace: [ 59.219924] dump_stack+0xa9/0x10e [ 59.220623] print_address_description.constprop.4+0x21/0x340 [ 59.221976] ? vprintk_func+0x66/0x240 [ 59.222752] __kasan_report.cold.8+0x78/0x91 [ 59.223602] ? nsim_dev_trap_report_work+0xa67/0xad0 [ 59.224603] kasan_report+0xe/0x20 [ 59.225296] nsim_dev_trap_report_work+0xa67/0xad0 [ 59.226435] ? rcu_read_lock_sched_held+0xaf/0xe0 [ 59.227512] ? trace_event_raw_event_rcu_quiescent_state_report+0x360/0x360 [ 59.228851] process_one_work+0x98f/0x1760 [ 59.229684] ? pwq_dec_nr_in_flight+0x330/0x330 [ 59.230656] worker_thread+0x91/0xc40 [ 59.231587] ? process_one_work+0x1760/0x1760 [ 59.232451] kthread+0x34a/0x410 [ 59.233104] ? __kthread_queue_delayed_work+0x240/0x240 [ 59.234141] ret_from_fork+0x3a/0x50 [ 59.234982] [ 59.235371] Allocated by task 187: [ 59.236189] save_stack+0x19/0x80 [ 59.236853] __kasan_kmalloc.constprop.5+0xc1/0xd0 [ 59.237822] kmem_cache_alloc_trace+0x14c/0x380 [ 59.238769] __nsim_dev_port_add+0xaf/0x5c0 [ 59.239627] nsim_dev_probe+0x4fc/0x1140 [ 59.240550] really_probe+0x264/0xc00 [ 59.241418] driver_probe_device+0x208/0x2e0 [ 59.242255] __device_attach_driver+0x215/0x2d0 [ 59.243150] bus_for_each_drv+0x154/0x1d0 [ 59.243944] __device_attach+0x1ba/0x2b0 [ 59.244923] bus_probe_device+0x1dd/0x290 [ 59.245805] device_add+0xbac/0x1550 [ 59.246528] new_device_store+0x1f4/0x400 [ 59.247306] bus_attr_store+0x7b/0xa0 [ 59.248047] sysfs_kf_write+0x10f/0x170 [ 59.248941] kernfs_fop_write+0x283/0x430 [ 59.249843] __vfs_write+0x81/0x100 [ 59.250546] vfs_write+0x1ce/0x510 [ 59.251190] ksys_write+0x104/0x200 [ 59.251873] do_syscall_64+0xa4/0x4e0 [ 59.252642] entry_SYSCALL_64_after_hwframe+0x49/0xbe [ 59.253837] [ 59.254203] Freed by task 187: [ 59.254811] save_stack+0x19/0x80 [ 59.255463] __kasan_slab_free+0x125/0x170 [ 59.256265] kfree+0x100/0x440 [ 59.256870] nsim_dev_remove+0x98/0x100 [ 59.257651] nsim_bus_remove+0x16/0x20 [ 59.258382] device_release_driver_internal+0x20b/0x4d0 [ 59.259588] bus_remove_device+0x2e9/0x5a0 [ 59.260551] device_del+0x410/0xad0 [ 59.263777] device_unregister+0x26/0xc0 [ 59.264616] nsim_bus_dev_del+0x16/0x60 [ 59.265381] del_device_store+0x2d6/0x3c0 [ 59.266295] bus_attr_store+0x7b/0xa0 [ 59.267192] sysfs_kf_write+0x10f/0x170 [ 59.267960] kernfs_fop_write+0x283/0x430 [ 59.268800] __vfs_write+0x81/0x100 [ 59.269551] vfs_write+0x1ce/0x510 [ 59.270252] ksys_write+0x104/0x200 [ 59.270910] do_syscall_64+0xa4/0x4e0 [ 59.271680] entry_SYSCALL_64_after_hwframe+0x49/0xbe [ 59.272812] [ 59.273211] The buggy address belongs to the object at ffff8883cbdd3200 [ 59.273211] which belongs to the cache kmalloc-512 of size 512 [ 59.275838] The buggy address is located 408 bytes inside of [ 59.275838] 512-byte region [ffff8883cbdd3200, ffff8883cbdd3400) [ 59.278151] The buggy address belongs to the page: [ 59.279215] page:ffffea000f2f7400 refcount:1 mapcount:0 mapping:ffff8883ecc0ce00 index:0x0 compound_mapcount: 0 [ 59.281449] flags: 0x200000000010200(slab|head) [ 59.282356] raw: 0200000000010200 ffffea000f2f3a08 ffffea000f2fd608 ffff8883ecc0ce00 [ 59.283949] raw: 0000000000000000 0000000000150015 00000001ffffffff 0000000000000000 [ 59.285608] page dumped because: kasan: bad access detected [ 59.286981] [ 59.287337] Memory state around the buggy address: [ 59.288310] ffff8883cbdd3280: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [ 59.289763] ffff8883cbdd3300: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [ 59.291452] >ffff8883cbdd3380: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [ 59.292945] ^ [ 59.293815] ffff8883cbdd3400: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [ 59.295220] ffff8883cbdd3480: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [ 59.296872] ================================================================== Fixes: da58f90f ("netdevsim: Add devlink-trap support") Signed-off-by:
Ido Schimmel <idosch@mellanox.com> Reported-by:
<syzbot+9ed8f68ab30761f3678e@syzkaller.appspotmail.com> Acked-by:
Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
David Howells authored
When rxrpc_recvmsg_data() sets the return value to 1 because it's drained all the data for the last packet, it checks the last-packet flag on the whole packet - but this is wrong, since the last-packet flag is only set on the final subpacket of the last jumbo packet. This means that a call that receives its last packet in a jumbo packet won't complete properly. Fix this by having rxrpc_locate_data() determine the last-packet state of the subpacket it's looking at and passing that back to the caller rather than having the caller look in the packet header. The caller then needs to cache this in the rxrpc_call struct as rxrpc_locate_data() isn't then called again for this packet. Fixes: 248f219c ("rxrpc: Rewrite the data and ack handling code") Fixes: e2de6c40 ("rxrpc: Use info in skbuff instead of reparsing a jumbo packet") Signed-off-by:
David Howells <dhowells@redhat.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Merge tag 'mac80211-for-net-2019-10-31' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211 Johannes Berg says: ==================== Just two fixes: * HT operation is not allowed on channel 14 (Japan only) * netlink policy for nexthop attribute was wrong ==================== Signed-off-by:
David S. Miller <davem@davemloft.net>
-
- Oct 31, 2019
-
-
David S. Miller authored
Haiyang Zhang says: ==================== hv_netvsc: fix error handling in netvsc_attach/set_features The error handling code path in these functions are not correct. This patch set fixes them. ==================== Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Haiyang Zhang authored
If rndis_filter_open() fails, we need to remove the rndis device created in earlier steps, before returning an error code. Otherwise, the retry of netvsc_attach() from its callers will fail and hang. Fixes: 7b2ee50c ("hv_netvsc: common detach logic") Signed-off-by:
Haiyang Zhang <haiyangz@microsoft.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Haiyang Zhang authored
When an error is returned by rndis_filter_set_offload_params(), we should still assign the unaffected features to ndev->features. Otherwise, these features will be missing. Fixes: d6792a5a ("hv_netvsc: Add handler for LRO setting change") Signed-off-by:
Haiyang Zhang <haiyangz@microsoft.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Vishal Kulkarni authored
Release resources when attaching to ULD fail. Otherwise, data mismatch is seen between LLD and ULD later on, which lead to kernel panic when accessing resources that should not even exist in the first place. Fixes: 94cdb8bb ("cxgb4: Add support for dynamic allocation of resources for ULD") Signed-off-by:
Shahjada Abul Husain <shahjada@chelsio.com> Signed-off-by:
Vishal Kulkarni <vishal@chelsio.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Eric Dumazet authored
We already annotated most accesses to sk->sk_napi_id We missed sk_mark_napi_id() and sk_mark_napi_id_once() which might be called without socket lock held in UDP stack. KCSAN reported : BUG: KCSAN: data-race in udpv6_queue_rcv_one_skb / udpv6_queue_rcv_one_skb write to 0xffff888121c6d108 of 4 bytes by interrupt on cpu 0: sk_mark_napi_id include/net/busy_poll.h:125 [inline] __udpv6_queue_rcv_skb net/ipv6/udp.c:571 [inline] udpv6_queue_rcv_one_skb+0x70c/0xb40 net/ipv6/udp.c:672 udpv6_queue_rcv_skb+0xb5/0x400 net/ipv6/udp.c:689 udp6_unicast_rcv_skb.isra.0+0xd7/0x180 net/ipv6/udp.c:832 __udp6_lib_rcv+0x69c/0x1770 net/ipv6/udp.c:913 udpv6_rcv+0x2b/0x40 net/ipv6/udp.c:1015 ip6_protocol_deliver_rcu+0x22a/0xbe0 net/ipv6/ip6_input.c:409 ip6_input_finish+0x30/0x50 net/ipv6/ip6_input.c:450 NF_HOOK include/linux/netfilter.h:305 [inline] NF_HOOK include/linux/netfilter.h:299 [inline] ip6_input+0x177/0x190 net/ipv6/ip6_input.c:459 dst_input include/net/dst.h:442 [inline] ip6_rcv_finish+0x110/0x140 net/ipv6/ip6_input.c:76 NF_HOOK include/linux/netfilter.h:305 [inline] NF_HOOK include/linux/netfilter.h:299 [inline] ipv6_rcv+0x1a1/0x1b0 net/ipv6/ip6_input.c:284 __netif_receive_skb_one_core+0xa7/0xe0 net/core/dev.c:5010 __netif_receive_skb+0x37/0xf0 net/core/dev.c:5124 process_backlog+0x1d3/0x420 net/core/dev.c:5955 napi_poll net/core/dev.c:6392 [inline] net_rx_action+0x3ae/0xa90 net/core/dev.c:6460 write to 0xffff888121c6d108 of 4 bytes by interrupt on cpu 1: sk_mark_napi_id include/net/busy_poll.h:125 [inline] __udpv6_queue_rcv_skb net/ipv6/udp.c:571 [inline] udpv6_queue_rcv_one_skb+0x70c/0xb40 net/ipv6/udp.c:672 udpv6_queue_rcv_skb+0xb5/0x400 net/ipv6/udp.c:689 udp6_unicast_rcv_skb.isra.0+0xd7/0x180 net/ipv6/udp.c:832 __udp6_lib_rcv+0x69c/0x1770 net/ipv6/udp.c:913 udpv6_rcv+0x2b/0x40 net/ipv6/udp.c:1015 ip6_protocol_deliver_rcu+0x22a/0xbe0 net/ipv6/ip6_input.c:409 ip6_input_finish+0x30/0x50 net/ipv6/ip6_input.c:450 NF_HOOK include/linux/netfilter.h:305 [inline] NF_HOOK include/linux/netfilter.h:299 [inline] ip6_input+0x177/0x190 net/ipv6/ip6_input.c:459 dst_input include/net/dst.h:442 [inline] ip6_rcv_finish+0x110/0x140 net/ipv6/ip6_input.c:76 NF_HOOK include/linux/netfilter.h:305 [inline] NF_HOOK include/linux/netfilter.h:299 [inline] ipv6_rcv+0x1a1/0x1b0 net/ipv6/ip6_input.c:284 __netif_receive_skb_one_core+0xa7/0xe0 net/core/dev.c:5010 __netif_receive_skb+0x37/0xf0 net/core/dev.c:5124 process_backlog+0x1d3/0x420 net/core/dev.c:5955 Reported by Kernel Concurrency Sanitizer on: CPU: 1 PID: 10890 Comm: syz-executor.0 Not tainted 5.4.0-rc3+ #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Fixes: e68b6e50 ("udp: enable busy polling for all sockets") Signed-off-by:
Eric Dumazet <edumazet@google.com> Reported-by:
syzbot <syzkaller@googlegroups.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Eric Dumazet authored
This socket field can be read and written by concurrent cpus. Use READ_ONCE() and WRITE_ONCE() annotations to document this, and avoid some compiler 'optimizations'. KCSAN reported : BUG: KCSAN: data-race in tcp_v4_rcv / tcp_v4_rcv write to 0xffff88812220763c of 4 bytes by interrupt on cpu 0: sk_incoming_cpu_update include/net/sock.h:953 [inline] tcp_v4_rcv+0x1b3c/0x1bb0 net/ipv4/tcp_ipv4.c:1934 ip_protocol_deliver_rcu+0x4d/0x420 net/ipv4/ip_input.c:204 ip_local_deliver_finish+0x110/0x140 net/ipv4/ip_input.c:231 NF_HOOK include/linux/netfilter.h:305 [inline] NF_HOOK include/linux/netfilter.h:299 [inline] ip_local_deliver+0x133/0x210 net/ipv4/ip_input.c:252 dst_input include/net/dst.h:442 [inline] ip_rcv_finish+0x121/0x160 net/ipv4/ip_input.c:413 NF_HOOK include/linux/netfilter.h:305 [inline] NF_HOOK include/linux/netfilter.h:299 [inline] ip_rcv+0x18f/0x1a0 net/ipv4/ip_input.c:523 __netif_receive_skb_one_core+0xa7/0xe0 net/core/dev.c:5010 __netif_receive_skb+0x37/0xf0 net/core/dev.c:5124 process_backlog+0x1d3/0x420 net/core/dev.c:5955 napi_poll net/core/dev.c:6392 [inline] net_rx_action+0x3ae/0xa90 net/core/dev.c:6460 __do_softirq+0x115/0x33f kernel/softirq.c:292 do_softirq_own_stack+0x2a/0x40 arch/x86/entry/entry_64.S:1082 do_softirq.part.0+0x6b/0x80 kernel/softirq.c:337 do_softirq kernel/softirq.c:329 [inline] __local_bh_enable_ip+0x76/0x80 kernel/softirq.c:189 read to 0xffff88812220763c of 4 bytes by interrupt on cpu 1: sk_incoming_cpu_update include/net/sock.h:952 [inline] tcp_v4_rcv+0x181a/0x1bb0 net/ipv4/tcp_ipv4.c:1934 ip_protocol_deliver_rcu+0x4d/0x420 net/ipv4/ip_input.c:204 ip_local_deliver_finish+0x110/0x140 net/ipv4/ip_input.c:231 NF_HOOK include/linux/netfilter.h:305 [inline] NF_HOOK include/linux/netfilter.h:299 [inline] ip_local_deliver+0x133/0x210 net/ipv4/ip_input.c:252 dst_input include/net/dst.h:442 [inline] ip_rcv_finish+0x121/0x160 net/ipv4/ip_input.c:413 NF_HOOK include/linux/netfilter.h:305 [inline] NF_HOOK include/linux/netfilter.h:299 [inline] ip_rcv+0x18f/0x1a0 net/ipv4/ip_input.c:523 __netif_receive_skb_one_core+0xa7/0xe0 net/core/dev.c:5010 __netif_receive_skb+0x37/0xf0 net/core/dev.c:5124 process_backlog+0x1d3/0x420 net/core/dev.c:5955 napi_poll net/core/dev.c:6392 [inline] net_rx_action+0x3ae/0xa90 net/core/dev.c:6460 __do_softirq+0x115/0x33f kernel/softirq.c:292 run_ksoftirqd+0x46/0x60 kernel/softirq.c:603 smpboot_thread_fn+0x37d/0x4a0 kernel/smpboot.c:165 Reported by Kernel Concurrency Sanitizer on: CPU: 1 PID: 16 Comm: ksoftirqd/1 Not tainted 5.4.0-rc3+ #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Signed-off-by:
Eric Dumazet <edumazet@google.com> Reported-by:
syzbot <syzkaller@googlegroups.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Jiri Pirko authored
The devlink parameter "acl_region_rehash_interval" is a runtime parameter whose value is stored in a dynamically allocated memory. While reloading the driver, this memory is freed and then allocated again. A use-after-free might happen if during this time frame someone tries to retrieve its value. Since commit 070c63f20f6c ("net: devlink: allow to change namespaces during reload") the use-after-free can be reliably triggered when reloading the driver into a namespace, as after freeing the memory (via reload_down() callback) all the parameters are notified. Fix this by unpublishing and then re-publishing the parameters during reload. Fixes: 98bbf70c1c41 ("mlxsw: spectrum: add "acl_region_rehash_interval" devlink param") Fixes: 7c62cfb8c574 ("devlink: publish params only after driver init is done") Signed-off-by:
Jiri Pirko <jiri@mellanox.com> Signed-off-by:
Ido Schimmel <idosch@mellanox.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Sudarsana Reddy Kalluru authored
Current implementation for nvm_attr configuration instructs the management FW to load/unload the nvm-cfg image for each user-provided attribute in the input file. This consumes lot of cycles even for few tens of attributes. This patch updates the implementation to perform load/commit of the config for every 50 attributes. After loading the nvm-image, MFW expects that config should be committed in a predefined timer value (5 sec), hence it's not possible to write large number of attributes in a single load/commit window. Hence performing the commits in chunks. Fixes: 0dabbe1b ("qed: Add driver API for flashing the config attributes.") Signed-off-by:
Sudarsana Reddy Kalluru <skalluru@marvell.com> Signed-off-by:
Ariel Elior <aelior@marvell.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Taehee Yoo authored
After commit 0ce1822c ("vxlan: add adjacent link to limit depth level"), vxlan_changelink() could fail because of netdev_adjacent_change_prepare(). netdev_adjacent_change_prepare() returns -EEXIST when old lower device and new lower device are same. (old lower device is "dst->remote_dev" and new lower device is "lowerdev") So, before calling it, lowerdev should be NULL if these devices are same. Test command1: ip link add dummy0 type dummy ip link add vxlan0 type vxlan dev dummy0 dstport 4789 vni 1 ip link set vxlan0 type vxlan ttl 5 RTNETLINK answers: File exists Reported-by:
Dan Carpenter <dan.carpenter@oracle.com> Fixes: 0ce1822c ("vxlan: add adjacent link to limit depth level") Signed-off-by:
Taehee Yoo <ap420073@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Colin Ian King authored
There is a spelling misake in a DP_NOTICE message. Fix it. Signed-off-by:
Colin Ian King <colin.king@canonical.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
- Oct 30, 2019
-
-
Ayala Beker authored
The API was reduced to include only knowledge currently needed by the FW scan logic, the rest is legacy. Support the new, reduced version. Using the old API with newer firmwares (starting from iwlwifi-*-50.ucode, which implements and requires the new API version) causes an assertion failure similar to this one: [ 2.854505] iwlwifi 0000:00:14.3: 0x20000038 | BAD_COMMAND Signed-off-by:
Ayala Beker <ayala.beker@intel.com> Signed-off-by:
Luca Coelho <luciano.coelho@intel.com> Signed-off-by:
Kalle Valo <kvalo@codeaurora.org>
-
Lorenzo Bianconi authored
mt76 dma layer is supposed to unmap skb data buffers while keep txwi mapped on hw dma ring. At the moment mt76 wrongly unmap txwi or does not unmap data fragments in even positions for non-linear skbs. This issue may result in hw hangs with A-MSDU if the system relies on IOMMU or SWIOTLB. Fix this behaviour properly unmapping data fragments on non-linear skbs. Fixes: 17f1de56 ("mt76: add common code shared between multiple chipsets") Signed-off-by:
Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by:
Kalle Valo <kvalo@codeaurora.org>
-
Lorenzo Bianconi authored
On same device (e.g. U7612E-H1) PCIE_ASPM causes continuous mcu hangs and instability. Since mt76x2 series does not manage PCIE PS states, first we try to disable ASPM using pci_disable_link_state. If it fails, we will disable PCIE PS configuring PCI registers. This patch has been successfully tested on U7612E-H1 mini-pice card Tested-by:
Oleksandr Natalenko <oleksandr@natalenko.name> Signed-off-by:
Felix Fietkau <nbd@nbd.name> Signed-off-by:
Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by:
Kalle Valo <kvalo@codeaurora.org>
-
Markus Theil authored
Mesh path nexthop should be a ethernet address, but current validation checks against 4 byte integers. Cc: stable@vger.kernel.org Fixes: 2ec600d6 ("nl80211/cfg80211: support for mesh, sta dumping") Signed-off-by:
Markus Theil <markus.theil@tu-ilmenau.de> Link: https://lore.kernel.org/r/20191029093003.10355-1-markus.theil@tu-ilmenau.de Signed-off-by:
Johannes Berg <johannes.berg@intel.com>
-
Masashi Honma authored
This patch disables setting of HT20 and more for channel 14 because the channel is only for IEEE 802.11b. The patch for net/wireless/util.c was unit-tested. The patch for net/wireless/chan.c was tested with iw command. Before this patch. $ sudo iw dev <ifname> set channel 14 HT20 $ After this patch. $ sudo iw dev <ifname> set channel 14 HT20 kernel reports: invalid channel definition command failed: Invalid argument (-22) $ Signed-off-by:
Masashi Honma <masashi.honma@gmail.com> Link: https://lore.kernel.org/r/20191021075045.2719-1-masashi.honma@gmail.com [clean up the code, use != instead of equivalent >] Signed-off-by:
Johannes Berg <johannes.berg@intel.com>
-
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linuxDavid S. Miller authored
Saeed Mahameed says: ==================== Mellanox, mlx5 fixes 2019-10-24 This series introduces misc fixes to mlx5 driver. v1->v2: - Dropped the kTLS counter documentation patch, Tariq will fix it and send it later. - Added a new fix for link speed mode reporting. ('net/mlx5e: Initialize link modes bitmap on stack') For -stable v4.14 ('net/mlx5e: Fix handling of compressed CQEs in case of low NAPI budget') For -stable v4.19 ('net/mlx5e: Fix ethtool self test: link speed') For -stable v5.2 ('net/mlx5: Fix flow counter list auto bits struct') ('net/mlx5: Fix rtable reference leak') For -stable v5.3 ('net/mlx5e: Remove incorrect match criteria assignment line') ('net/mlx5e: Determine source port properly for vlan push action') ('net/mlx5e: Initialize link modes bitmap on stack') ==================== Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Nikolay Aleksandrov authored
A simple typo fix in the nl error message (fbd -> fdb). CC: David Ahern <dsahern@gmail.com> Fixes: 8c6e137f ("rtnetlink: Update rtnl_fdb_dump for strict data checking") Signed-off-by:
Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Reviewed-by:
David Ahern <dsahern@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Ursula Braun authored
If a nonblocking socket is immediately closed after connect(), the connect worker may not have started. This results in a refcount problem, since sock_hold() is called from the connect worker. This patch moves the sock_hold in front of the connect worker scheduling. Reported-by:
<syzbot+4c063e6dea39e4b79f29@syzkaller.appspotmail.com> Fixes: 50717a37 ("net/smc: nonblocking connect rework") Reviewed-by:
Karsten Graul <kgraul@linux.ibm.com> Signed-off-by:
Ursula Braun <ubraun@linux.ibm.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Taehee Yoo authored
When a bonding interface is being created, it setups its mode and options. At that moment, it uses mode_lock so mode_lock should be initialized before that moment. rtnl_newlink() rtnl_create_link() alloc_netdev_mqs() ->setup() //bond_setup() ->newlink //bond_newlink bond_changelink() register_netdevice() ->ndo_init() //bond_init() After commit 089bca2c ("bonding: use dynamic lockdep key instead of subclass"), mode_lock is initialized in bond_init(). So in the bond_changelink(), un-initialized mode_lock can be used. mode_lock should be initialized in bond_setup(). This patch partially reverts commit 089bca2c ("bonding: use dynamic lockdep key instead of subclass") Test command: ip link add bond0 type bond mode 802.3ad lacp_rate 0 Splat looks like: [ 60.615127] INFO: trying to register non-static key. [ 60.615900] the code is fine but needs lockdep annotation. [ 60.616697] turning off the locking correctness validator. [ 60.617490] CPU: 1 PID: 957 Comm: ip Not tainted 5.4.0-rc3+ #109 [ 60.618350] Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006 [ 60.619481] Call Trace: [ 60.619918] dump_stack+0x7c/0xbb [ 60.620453] register_lock_class+0x1215/0x14d0 [ 60.621131] ? alloc_netdev_mqs+0x7b3/0xcc0 [ 60.621771] ? is_bpf_text_address+0x86/0xf0 [ 60.622416] ? is_dynamic_key+0x230/0x230 [ 60.623032] ? unwind_get_return_address+0x5f/0xa0 [ 60.623757] ? create_prof_cpu_mask+0x20/0x20 [ 60.624408] ? arch_stack_walk+0x83/0xb0 [ 60.625023] __lock_acquire+0xd8/0x3de0 [ 60.625616] ? stack_trace_save+0x82/0xb0 [ 60.626225] ? stack_trace_consume_entry+0x160/0x160 [ 60.626957] ? deactivate_slab.isra.80+0x2c5/0x800 [ 60.627668] ? register_lock_class+0x14d0/0x14d0 [ 60.628380] ? alloc_netdev_mqs+0x7b3/0xcc0 [ 60.629020] ? save_stack+0x69/0x80 [ 60.629574] ? save_stack+0x19/0x80 [ 60.630121] ? __kasan_kmalloc.constprop.4+0xa0/0xd0 [ 60.630859] ? __kmalloc_node+0x16f/0x480 [ 60.631472] ? alloc_netdev_mqs+0x7b3/0xcc0 [ 60.632121] ? rtnl_create_link+0x2ed/0xad0 [ 60.634388] ? __rtnl_newlink+0xad4/0x11b0 [ 60.635024] lock_acquire+0x164/0x3b0 [ 60.635608] ? bond_3ad_update_lacp_rate+0x91/0x200 [bonding] [ 60.636463] _raw_spin_lock_bh+0x38/0x70 [ 60.637084] ? bond_3ad_update_lacp_rate+0x91/0x200 [bonding] [ 60.637930] bond_3ad_update_lacp_rate+0x91/0x200 [bonding] [ 60.638753] ? bond_3ad_lacpdu_recv+0xb30/0xb30 [bonding] [ 60.639552] ? bond_opt_get_val+0x180/0x180 [bonding] [ 60.640307] ? ___slab_alloc+0x5aa/0x610 [ 60.640925] bond_option_lacp_rate_set+0x71/0x140 [bonding] [ 60.641751] __bond_opt_set+0x1ff/0xbb0 [bonding] [ 60.643217] ? kasan_unpoison_shadow+0x30/0x40 [ 60.643924] bond_changelink+0x9a4/0x1700 [bonding] [ 60.644653] ? memset+0x1f/0x40 [ 60.742941] ? bond_slave_changelink+0x1a0/0x1a0 [bonding] [ 60.752694] ? alloc_netdev_mqs+0x8ea/0xcc0 [ 60.753330] ? rtnl_create_link+0x2ed/0xad0 [ 60.753964] bond_newlink+0x1e/0x60 [bonding] [ 60.754612] __rtnl_newlink+0xb9f/0x11b0 [ ... ] Reported-by:
<syzbot+8da67f407bcba2c72e6e@syzkaller.appspotmail.com> Reported-by:
<syzbot+0d083911ab18b710da71@syzkaller.appspotmail.com> Fixes: 089bca2c ("bonding: use dynamic lockdep key instead of subclass") Signed-off-by:
Taehee Yoo <ap420073@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Anson Huang authored
Use platform_get_irq_byname_optional() and platform_get_irq_optional() instead of platform_get_irq_byname() and platform_get_irq() for optional IRQs to avoid below error message during probe: [ 0.795803] fec 30be0000.ethernet: IRQ pps not found [ 0.800787] fec 30be0000.ethernet: IRQ index 3 not found Signed-off-by:
Anson Huang <Anson.Huang@nxp.com> Acked-by:
Fugang Duan <fugang.duan@nxp.com> Reviewed-by:
Stephen Boyd <swboyd@chromium.org> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Anson Huang authored
Failed to get irq using name is NOT fatal as driver will use index to get irq instead, use platform_get_irq_byname_optional() instead of platform_get_irq_byname() to avoid below error message during probe: [ 0.819312] fec 30be0000.ethernet: IRQ int0 not found [ 0.824433] fec 30be0000.ethernet: IRQ int1 not found [ 0.829539] fec 30be0000.ethernet: IRQ int2 not found Signed-off-by:
Anson Huang <Anson.Huang@nxp.com> Acked-by:
Fugang Duan <fugang.duan@nxp.com> Reviewed-by:
Stephen Boyd <swboyd@chromium.org> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Jakub Kicinski authored
Dave's Facebook email address is not working, and my attempts to contact him are failing. Let's remove it to trim down the list of TLS maintainers. Signed-off-by:
Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by:
Simon Horman <simon.horman@netronome.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Xin Long authored
This patch is to improve the tun_info options_len by dropping the skb when TUNNEL_VXLAN_OPT is set but options_len is less than vxlan_metadata. This can void a potential out-of-bounds access on ip_tun_info. Fixes: ee122c79 ("vxlan: Flow based tunneling") Signed-off-by:
Xin Long <lucien.xin@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Xin Long authored
The check for !md doens't really work for ip_tunnel_info_opts(info) which only does info + 1. Also to avoid out-of-bounds access on info, it should ensure options_len is not less than erspan_metadata in both erspan_xmit() and ip6erspan_tunnel_xmit(). Fixes: 1a66a836 ("gre: add collect_md mode to ERSPAN tunnel") Signed-off-by:
Xin Long <lucien.xin@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-