In commit 4e5c8a99 ("drm/i915: Drop i915_request.lock requirement
for intel_rps_boost()"), we decoupled the rps worker from the pm so
that we could avoid the synchronization penalty which makes the
assertion liable to run too early. Which makes warning invalid hence
removed.

Fixes: 4e5c8a99

 ("drm/i915: Drop i915_request.lock requirement for intel_rps_boost()")

Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Tejas Upadhyay <tejaskumarx.surendrakumar.upadhyay@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210914090412.1393498-1-tejaskumarx.surendrakumar.upadhyay@intel.com

In commit:

commit 1e6decf3


Author: Hugh Dickins <hughd@google.com>
Date:   Thu Sep 2 14:54:43 2021 -0700

    shmem: shmem_writepage() split unlikely i915 THP

it looks THP + shmem_writeback was an unexpected combination, and ends up
hitting some BUG_ON, but it also looks like that is now fixed.

While the IGTs did eventually hit this(although not during pre-merge it
seems), it's likely worthwhile adding some explicit coverage for this
scenario in the shrink_thp selftest.

References: https://gitlab.freedesktop.org/drm/intel/-/issues/4166
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210921142116.3807946-1-matthew.auld@intel.com

Currently we blow up in trace_dma_fence_init, when calling into
get_driver_name or get_timeline_name, since both the engine and context
might be NULL(or contain some garbage address) in the case of newly
allocated slab objects via the request ctor. Note that we also use
SLAB_TYPESAFE_BY_RCU here, which allows requests to be immediately
freed, but delay freeing the underlying page by an RCU grace period.
With this scheme requests can be re-allocated, at the same time as they
are also being read by some lockless RCU lookup mechanism.

In the ctor case, which is only called for new slab objects(i.e allocate
new page and call the ctor for each object) it's safe to reset the
context/engine prior to calling into dma_fence_init, since we can be
certain that no one is doing an RCU lookup which might depend on peeking
at the engine/context, like in active_engine(), since the object can't
yet be externally visible.

In the recycled case(which might also be externally visible) the request
refcount always transitions from 0->1 after we set the context/engine
etc, which should ensure it's valid to dereference the engine for
example, when doing an RCU list-walk, so long as we can also increment
the refcount first. If the refcount is already zero, then the request is
considered complete/released.  If it's non-zero, then the request might
be in the process of being re-allocated, or potentially still in flight,
however after successfully incrementing the refcount, it's possible to
carefully inspect the request state, to determine if the request is
still what we were looking for. Note that all externally visible
requests returned to the cache must have zero refcount.

One possible fix then is to move dma_fence_init out from the request
ctor. Originally this was how it was done, but it was moved in:

commit 855e39e6
Author: Chris Wilson <chris@chris-wilson.co.uk>
Date:   Mon Feb 3 09:41:48 2020 +0000

    drm/i915: Initialise basic fence before acquiring seqno

where it looks like intel_timeline_get_seqno() relied on some of the
rq->fence state, but that is no longer the case since:

commit 12ca695d
Author: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Date:   Tue Mar 23 16:49:50 2021 +0100

    drm/i915: Do not share hwsp across contexts any more, v8.

intel_timeline_get_seqno() could also be cleaned up slightly by dropping
the request argument.

Moving dma_fence_init back out of the ctor, should ensure we have enough
of the request initialised in case of trace_dma_fence_init.
Functionally this should be the same, and is effectively what we were
already open coding before, except now we also assign the fence->lock
and fence->ops, but since these are invariant for recycled
requests(which might be externally visible), and will therefore already
hold the same value, it shouldn't matter.

An alternative fix, since we don't yet have a fully initialised request
when in the ctor, is just setting the context/engine as NULL, but this
does require adding some extra handling in get_driver_name etc.

v2(Daniel):
  - Try to make the commit message less confusing

Fixes: 855e39e6

 ("drm/i915: Initialise basic fence before acquiring seqno")
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Michael Mason <michael.w.mason@intel.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210921134202.3803151-1-matthew.auld@intel.com

We really only need memcpy restore for objects that affect the
operability of the migrate context. That is, primarily the page-table
objects of the migrate VM.

Add an object flag, I915_BO_ALLOC_PM_EARLY for objects that need early
restores using memcpy and a way to assign LMEM page-table object flags
to be used by the vms.

Restore objects without this flag with the gpu blitter and only objects
carrying the flag using TTM memcpy.

Initially mark the migrate, gt, gtt and vgpu vms to use this flag, and
defer for a later audit which vms actually need it. Most importantly, user-
allocated vms with pinned page-table objects can be restored using the
blitter.

Performance-wise memcpy restore is probably as fast as gpu restore if not
faster, but using gpu restore will help tackling future restrictions in
mappable LMEM size.

v4:
- Don't mark the aliasing ppgtt page table flags for early resume, but
  rather the ggtt page table flags as intended. (Matthew Auld)
- The check for user buffer objects during early resume is pointless, since
  they are never marked I915_BO_ALLOC_PM_EARLY. (Matthew Auld)
v5:
- Mark GuC LMEM objects with I915_BO_ALLOC_PM_EARLY to have them restored
  before we fire up the migrate context.

Cc: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210922062527.865433-8-thomas.hellstrom@linux.intel.com

Pinned context images are now reset during resume. Don't back them up,
and assuming that rings can be assumed empty at suspend, don't back them
up either.

Introduce a new object flag, I915_BO_ALLOC_PM_VOLATILE meaning that an
object is allowed to lose its content on suspend.

v3:
- Slight documentation clarification (Matthew Auld)

Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210922062527.865433-7-thomas.hellstrom@linux.intel.com

Pinned contexts, like the migrate contexts need reset after resume
since their context image may have been lost. Also the GuC needs to
register pinned contexts.

Add a list to struct intel_engine_cs where we add all pinned contexts on
creation, and traverse that list at resume time to reset the pinned
contexts.

This fixes the kms_pipe_crc_basic@suspend-read-crc-pipe-a selftest for now,
but proper LMEM backup / restore is needed for full suspend functionality.
However, note that even with full LMEM backup / restore it may be
desirable to keep the reset since backing up the migrate context images
must happen using memcpy() after the migrate context has become inactive,
and for performance- and other reasons we want to avoid memcpy() from
LMEM.

Also traverse the list at guc_init_lrc_mapping() calling
guc_kernel_context_pin() for the pinned contexts, like is already done
for the kernel context.

v2:
- Don't reset the contexts on each __engine_unpark() but rather at
  resume time (Chris Wilson).
v3:
- Reset contexts in the engine sanitize callback. (Chris Wilson)

Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Brost Matthew <matthew.brost@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210922062527.865433-6-thomas.hellstrom@linux.intel.com

Just evict unpinned objects to system. For pinned LMEM objects,
make a backup system object and blit the contents to that.

Backup is performed in three steps,
1: Opportunistically evict evictable objects using the gpu blitter.
2: After gt idle, evict evictable objects using the gpu blitter. This will
be modified in an upcoming patch to backup pinned objects that are not used
by the blitter itself.
3: Backup remaining pinned objects using memcpy.

Also move uC suspend to after 2) to make sure we have a functional GuC
during 2) if using GuC submission.

v2:
- Major refactor to make sure gem_exec_suspend@hang-SX subtests work, and
  suspend / resume works with a slightly modified GuC submission enabling
  patch series.

v3:
- Fix a potential use-after-free (Matthew Auld)
- Use i915_gem_object_create_shmem() instead of
  i915_gem_object_create_region (Matthew Auld)
- Minor simplifications (Matthew Auld)
- Fix up kerneldoc for i195_ttm_restore_region().
- Final lmem_suspend() call moved to i915_gem_backup_suspend from
  i915_gem_suspend_late, since the latter gets called at driver unload
  and we don't unnecessarily want to run it at that time.

v4:
- Interface change of ttm- & lmem suspend / resume functions to use
  flags rather than bools. (Matthew Auld)
- Completely drop the i915_gem_backup_suspend change (Matthew Auld)

Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210922062527.865433-5-thomas.hellstrom@linux.intel.com

With GuC submission on DG1, the execution of the requests times out
for the gem_exec_suspend igt test case after executing around 800-900
of 1000 submitted requests.

Given the time we allow elsewhere for fences to signal (in the order of
seconds), increase the timeout before we mark the gt wedged and proceed.

Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Acked-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210922062527.865433-4-thomas.hellstrom@linux.intel.com

An upcoming common pattern is to traverse the region object list and
perform certain actions on all objects in a region. It's a little tricky
to get the list locking right, in particular since a gem object may
change region unless it's pinned or the object lock is held.

Define a function that does this for us and that takes an argument that
defines the action to be performed on each object.

v3:
- Improve structure documentation a bit (Matthew Auld)

Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210922062527.865433-3-thomas.hellstrom@linux.intel.com

When backing up or restoring contents of pinned objects at suspend /
resume time we need to allocate a new object as the backup. Add a function
to facilitate copies between the two. Some data needs to be copied before
the migration context is ready for operation, so make sure we can
disable accelerated copies.

v2:
- Fix a missing return value check (Matthew Auld)

Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210922062527.865433-2-thomas.hellstrom@linux.intel.com

Somehow we managed to invert the test for i915_gem_object_evictable(),
which causes a warning in DG1 BAT, igt@debugfs_test@read_all_entries.

Fix the lock check to only warn if the object *is* indeed evictable and
not protected from eviction by fences.

Cc: Matthew Brost <matthew.brost@intel.com>
Fixes: 91160c83

 ("drm/i915: Take pinning into account in __i915_gem_object_is_lmem")

Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210922083807.888206-2-thomas.hellstrom@linux.intel.com

Nested grids in grid-table cells are not specified as proper ReST
constructs.
Commit 572f2a5c ("drm/i915/guc: Update firmware to v62.0.0")
added a couple of kerneldoc tables of the form:

  +---+-------+------------------------------------------------------+
  | 1 |  31:0 |  +------------------------------------------------+  |
  +---+-------+  |                                                |  |
  |...|       |  |  Embedded `HXG Message`_                       |  |
  +---+-------+  |                                                |  |
  | n |  31:0 |  +------------------------------------------------+  |
  +---+-------+------------------------------------------------------+

For "make htmldocs", they happen to work as one might expect,
but they are incompatible with "make latexdocs" and "make pdfdocs",
and cause the generated gpu.tex file to become incomplete and
unbuildable by xelatex.

Restore the compatibility by removing those nested grids in the tables.

Size comparison of generated gpu.tex:

                  Sphinx 2.4.4  Sphinx 4.2.0
  v5.14:               3238686       3841631
  v5.15-rc1:            376270        432729
  with this fix:       3377846       3998095

Fixes: 572f2a5c

 ("drm/i915/guc: Update firmware to v62.0.0")
Cc: John Harrison <John.C.Harrison@Intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Akira Yokosawa <akiyks@gmail.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/4a227569-074f-c501-58bb-d0d8f60a8ae9@gmail.com

With the recent refactor of the uncore mmio handling, all
forcewake-based platforms (i.e., graphics version 6 and beyond) now use
the 'fwtable' read handlers.  Let's pull the assignment out of the
per-platform if/else ladder to make this more obvious.

Suggested-by: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Suggested-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210923003029.2194375-1-matthew.d.roper@intel.com

It is not very useful to have code which tries to report a rapidly
transient state which will not report anything majority of the time,
especially since it is currently only used from
<debugfs>/i915_gem_framebuffers.

Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Acked-by: Christian König <christian.koenig@amd.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210915114153.951670-1-tvrtko.ursulin@linux.intel.com

We thought the DG2 table of shadowed registers would be the same as the
gen12/xehp table, but it turns out that there are a few minor
differences that require us to define a new DG2-specific table:
 * One register is removed (0xC4D4)
 * One register is added (0xC4E0)

Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210910201030.3436066-7-matthew.d.roper@intel.com

Consolidate down to just a single 'fwtable' implementation.  For reads
we don't need to worry about shadow tables.

While consolidating the functions, gen11/gen12 pick up a
NEEDS_FORCE_WAKE() check that they didn't have before, allowing them to
bypass a lot of forcewake/shadow checking for non-GT registers (e.g.,
display).

v2:
 - Restore NEEDS_FORCE_WAKE() check.  (Chris, Tvrtko)

Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210910201030.3436066-6-matthew.d.roper@intel.com

Now that the reference to the shadow table is stored within the uncore,
we don't need to generate separate fwtable, gen11_fwtable, and
gen12_fwtable variants of the register write functions; a single
'fwtable' implementation will work for all of those platforms now.

While consolidating the functions, gen11/gen12 pick up a
NEEDS_FORCE_WAKE() check that they didn't have before, allowing them to
bypass a lot of forcewake/shadow checking for non-GT registers (e.g.,
display).  However since these later platforms also introduce media
engines at higher MMIO offsets, the definition of NEEDS_FORCE_WAKE() is
extended to also consider register offsets above GEN11_BSD_RING_BASE.

v2:
 - Restore NEEDS_FORCE_WAKE(), but extend it for compatibility with the
   gen11+ platforms by also passing offsets above GEN11_BSD_RING_BASE.
   (Chris, Tvrtko)

Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210910201030.3436066-5-matthew.d.roper@intel.com

Now that we have both a standard forcewake table (albeit a single-entry
table) and the shadow table stored in the uncore, we can drop the
gen8-specific write handlers in favor of the general fwtable version.

Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210910201030.3436066-4-matthew.d.roper@intel.com

Store a reference to a platform's shadow table inside the uncore, the
same as we do with the forcewake table.  This will allow us to use a
single set of functions that operate on the shadow table reference
rather than generating lots of nearly-identical functions via macros
that differ only in terms of the table that they reference.

Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210910201030.3436066-3-matthew.d.roper@intel.com

On gen6-gen8 (except vlv/chv) we don't use a forcewake lookup table; we
simply check whether the register offset is < 0x40000, and return
FORCEWAKE_RENDER if it is.  To prepare for upcoming refactoring, let's
define a single-entry forcewake table from [0x0, 0x3ffff] and switch
these platforms over to use the fwtable reader functions.

v2:
 - Drop __gen6_reg_read_fw_domains which is no longer used.  (Tvrtko)

Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210910201030.3436066-2-matthew.d.roper@intel.com

On Xe_HP and beyond the SFC unit may be fused off, even if the
corresponding media engines are present.  Check the SFC-specific fusing
before trying to dump the SFC_DONE instances.

Cc: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210917161203.812251-3-matthew.d.roper@intel.com

Xe_HP adds some new bits to the FUSE1 register to let us know whether a
given SFC unit is present.  We should take this into account while
initializing SFC availability to our VCS and VECS engines.

While we're at it, update the FUSE1 register definition to use
REG_GENMASK / REG_FIELD_GET notation.

Note that, the bspec confusingly names the fuse bits "disable" despite
the register reflecting the *enable* status of the SFC units.  The
original architecture documents which the bspec is based on do properly
name this field "SFC_ENABLE."

Bspec: 52543
Cc: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210917161203.812251-2-matthew.d.roper@intel.com

Don't blow up on a GEM_WARN_ON in __i915_gem_object_is_lmem if the
object is pinned (not evictable).

Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210916162819.27848-6-matthew.brost@intel.com

Enable GuC submission by default on DG1

Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: John Harrison <John.C.Harrison@Intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210916162819.27848-5-matthew.brost@intel.com

Add DG1 GuC / HuC firmware defs

Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210916162819.27848-4-matthew.brost@intel.com

The firmware binary has to be loaded from lmem and the recommendation is
to put all other objects in there as well. Note that we don't fall back
to system memory if the allocation in lmem fails because all objects are
allocated during driver load and if we have issues with lmem at that point
something is seriously wrong with the system, so no point in trying to
handle it.

Cc: Matthew Auld <matthew.auld@intel.com>
Cc: Abdiel Janulgue <abdiel.janulgue@linux.intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Vinay Belgaumkar <vinay.belgaumkar@intel.com>
Cc: Radoslaw Szwichtenberg <radoslaw.szwichtenberg@intel.com>
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210916162819.27848-3-matthew.brost@intel.com

Defining vma on stack can cause stack overflow, if
vma gets populated with new fields.

v2:
 (Daniel Vetter)
  - Add kerneldoc for new field

Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: Venkata Sandeep Dhanalakota <venkata.s.dhanalakota@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210916162819.27848-2-matthew.brost@intel.com

Adding missing "intel_" prefix in set_mocs_index().

Fixes: b62aa57e

 ("drm/i915/gt: Add support of mocs propagation")
Cc: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Ayaz A Siddiqui <ayaz.siddiqui@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210916062736.1733587-1-ayaz.siddiqui@intel.com

Support for multiple GT's within a single i915 device will be arriving
soon.  Since each GT may have its own fusing and require different
workarounds, we need to make the GT workaround functions and multicast
steering setup per-gt.

Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: Venkata Sandeep Dhanalakota <venkata.s.dhanalakota@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210917170845.836358-1-matthew.d.roper@intel.com

Needed by Maarten's series "drm/i915: Short-term pinning and async
eviction".

Link: https://lists.freedesktop.org/archives/intel-gfx/2021-September/277870.html
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>

Although commit 9dd4b065 ("drm/i915/gt: Move pm debug files into a
gt aware debugfs") says it was moving debug files to gt/, the
i915_frequency_info file was left behind and its implementation copied
into drivers/gpu/drm/i915/gt/debugfs_gt_pm.c. Over time we had several
patches having to change both places to keep them in sync (and some
patches failing to do so). The initial idea was to remove
i915_frequency_info, but there are user space tools using it. From a
quick code search there are other scripts and test tools besides igt, so
it's not simply updating igt to get rid of the older file.

Here we export a function using drm_printer as parameter and make
both show() implementations to call this same function. Aside from a few
variable name differences, for i915_frequency_info this brings a few
lines that were not previously printed: RP UP EI, RP UP THRESHOLD, RP
DOWN THRESHOLD and RP DOWN EI.  These came in as part of
commit 9c878557

 ("drm/i915/gt: Use the RPM config register to
determine clk frequencies"), which didn't change both places.

Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210918025754.1254705-4-lucas.demarchi@intel.com

We shouldn't be using debugfs_ namespace for this functionality. Rename
debugfs_gt_pm.[ch] to intel_gt_pm_debugfs.[ch] and then make
functions, defines and structs follow suit.

Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210918025754.1254705-3-lucas.demarchi@intel.com

We shouldn't be using debugfs_ namespace for this functionality. Rename
debugfs_engines.[ch] to intel_gt_engines_debugfs.[ch] and then make
functions, defines and structs follow suit.

Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210918025754.1254705-2-lucas.demarchi@intel.com

We shouldn't be using debugfs_ namespace for this functionality. Rename
debugfs_gt.[ch] to intel_gt_debugfs.[ch] and then make functions,
defines and structs follow suit.

While at it and since we are renaming the header, sort the includes
alphabetically.

Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210918025754.1254705-1-lucas.demarchi@intel.com

i915 will soon gain an eviction path that trylock a whole lot of locks
for eviction, getting dmesg failures like below:

  BUG: MAX_LOCK_DEPTH too low!
  turning off the locking correctness validator.
  depth: 48  max: 48!
  48 locks held by i915_selftest/5776:
   #0: ffff888101a79240 (&dev->mutex){....}-{3:3}, at: __driver_attach+0x88/0x160
   #1: ffffc900009778c0 (reservation_ww_class_acquire){+.+.}-{0:0}, at: i915_vma_pin.constprop.63+0x39/0x1b0 [i915]
   #2: ffff88800cf74de8 (reservation_ww_class_mutex){+.+.}-{3:3}, at: i915_vma_pin.constprop.63+0x5f/0x1b0 [i915]
   #3: ffff88810c7f9e38 (&vm->mutex/1){+.+.}-{3:3}, at: i915_vma_pin_ww+0x1c4/0x9d0 [i915]
   #4: ffff88810bad5768 (reservation_ww_class_mutex){+.+.}-{3:3}, at: i915_gem_evict_something+0x110/0x860 [i915]
   #5: ffff88810bad60e8 (reservation_ww_class_mutex){+.+.}-{3:3}, at: i915_gem_evict_something+0x110/0x860 [i915]
  ...
   #46: ffff88811964d768 (reservation_ww_class_mutex){+.+.}-{3:3}, at: i915_gem_evict_something+0x110/0x860 [i915]
   #47: ffff88811964e0e8 (reservation_ww_class_mutex){+.+.}-{3:3}, at: i915_gem_evict_something+0x110/0x860 [i915]
  INFO: lockdep is turned off.

Fixing eviction to nest into ww_class_acquire is a high priority, but
it requires a rework of the entire driver, which can only be done one
step at a time.

As an intermediate solution, add an acquire context to
ww_mutex_trylock, which allows us to do proper nesting annotations on
the trylocks, making the above lockdep splat disappear.

This is also useful in regulator_lock_nested, which may avoid dropping
regulator_nesting_mutex in the uncontended path, so use it there.

TTM may be another user for this, where we could lock a buffer in a
fastpath with list locks held, without dropping all locks we hold.

[peterz: rework actual ww_mutex_trylock() implementations]
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/YUBGPdDDjKlxAuXJ@hirez.programming.kicks-ass.net

When we implement delayed destroy, we may have a second
call to the delete_mem_notify() handler, while free_object()
only should be called once.

Move it to bo->destroy(), to ensure it's only called once.
This fixes some weird memory corruption issues with delayed
destroy when async eviction is used.

Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210830121006.2978297-2-maarten.lankhorst@linux.intel.com
Fixes: 213d5092

 ("drm/i915/ttm: Introduce a TTM i915 gem object backend")
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>

GPU wedged flag now set on driver unregister to prevent from further
using the GPU can be then cleared unintentionally when calling
__intel_gt_unset_wedged() still before the flag is finally marked
unrecoverable.  We need to have it marked unrecoverable earlier.
Implement that by replacing a call to intel_gt_set_wedged() in
intel_gt_driver_unregister() with intel_gt_set_wedged_on_fini().

With the above in place, intel_gt_set_wedged_on_fini() is now called
twice on driver remove, second time from __intel_gt_disable().  This
seems harmless, while dropping intel_gt_set_wedged_on_fini() from
__intel_gt_disable() proved to break some driver probe error unwind
paths as well as mock selftest exit path.

Signed-off-by: Janusz Krzysztofik <janusz.krzysztofik@linux.intel.com>
Cc: Michał Winiarski <michal.winiarski@intel.com>
Reviewed-by: Michał Winiarski <michal.winiarski@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210903142837.216978-1-janusz.krzysztofik@linux.intel.com

Add mmap_read_lock/unlock around vma_lookup(). The core code requires
this for lookups. Since we only check if the return value is NULL,
we can immediately unlock.

This fixes the following splat in the selftes:

i915: Running i915_gem_mman_live_selftests/igt_mmap
------------[ cut here ]------------
WARNING: CPU: 3 PID: 5654 at include/linux/mmap_lock.h:164 find_vma+0x4e/0xb0
Modules linked in: i915(+) vgem fuse snd_hda_codec_hdmi snd_hda_codec_realtek snd_hda_codec_generic ledtrig_audio mei_hdcp x86_pkg_temp_thermal coretemp crct10dif_pclmul crc32_pclmul ghash_clmulni_intel snd_intel_dspcfg snd_hda_codec snd_hwdep e1000e snd_hda_core ptp snd_pcm ttm mei_me pps_core i2c_i801 prime_numbers i2c_smbus mei [last unloaded: i915]
CPU: 3 PID: 5654 Comm: i915_selftest Tainted: G     U            5.15.0-rc1-CI-Trybot_7984+ #1
Hardware name: Micro-Star International Co., Ltd. MS-7B54/Z370M MORTAR (MS-7B54), BIOS 1.00 10/31/2017
RIP: 0010:find_vma+0x4e/0xb0
Code: de 48 89 ef e8 d3 94 fe ff 48 85 c0 74 34 48 83 c4 08 5b 5d c3 48 8d bf 28 01 00 00 be ff ff ff ff e8 d6 46 8b 00 85 c0 75 c8 <0f> 0b 48 8b 85 b8 00 00 00 48 85 c0 75 c6 48 89 ef e8 12 26 87 00
RSP: 0018:ffffc900013df980 EFLAGS: 00010246
RAX: 0000000000000000 RBX: 00007f9df2b80000 RCX: 0000000000000000
RDX: 0000000000000001 RSI: ffffffff822e314c RDI: ffffffff8233c83f
RBP: ffff88811bafc840 R08: ffff888107d0ddb8 R09: 00000000fffffffe
R10: 0000000000000001 R11: 00000000ffbae7ba R12: 0000000000000000
R13: 0000000000000000 R14: ffff88812a710000 R15: ffff888114fa42c0
FS:  00007f9def9d4c00(0000) GS:ffff888266580000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f799627fe50 CR3: 000000011bbc2006 CR4: 00000000003706e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
 __igt_mmap+0xe0/0x490 [i915]
 igt_mmap+0xd2/0x160 [i915]
 ? __trace_bprintk+0x6e/0x80
 __i915_subtests.cold.7+0x42/0x92 [i915]
 ? i915_perf_selftests+0x20/0x20 [i915]
 ? __i915_nop_setup+0x10/0x10 [i915]
 __run_selftests.part.3+0x10d/0x172 [i915]
 i915_live_selftests.cold.5+0x1f/0x47 [i915]
 i915_pci_probe+0x93/0x1d0 [i915]

Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Closes: https://gitlab.freedesktop.org/drm/intel/issues/4129
Link: https://patchwork.freedesktop.org/patch/msgid/20210915105946.394412-1-maarten.lankhorst@linux.intel.com
Reviewed-by: Matthew Auld <matthew.auld@intel.com>

Close the divergence which has caused patches not to apply and
have a solid baseline for the PXP patches that Rodrigo will send
a topic branch PR for.

Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>

Bspec: 45101, 45427
Cc: Ramalingam C <ramalingam.c@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Matt Atwood <matthew.s.atwood@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210904003544.2422282-3-matthew.d.roper@intel.com