commit 6a02a61e upstream.

Fix the following use-after-free complaint triggered by blktests nvme/004:

BUG: KASAN: user-memory-access in blk_mq_complete_request_remote+0xac/0x350
Read of size 4 at addr 0000607bd1835943 by task kworker/13:1/460
Workqueue: nvmet-wq nvme_loop_execute_work [nvme_loop]
Call Trace:
 show_stack+0x52/0x58
 dump_stack_lvl+0x49/0x5e
 print_report.cold+0x36/0x1e2
 kasan_report+0xb9/0xf0
 __asan_load4+0x6b/0x80
 blk_mq_complete_request_remote+0xac/0x350
 nvme_loop_queue_response+0x1df/0x275 [nvme_loop]
 __nvmet_req_complete+0x132/0x4f0 [nvmet]
 nvmet_req_complete+0x15/0x40 [nvmet]
 nvmet_execute_io_connect+0x18a/0x1f0 [nvmet]
 nvme_loop_execute_work+0x20/0x30 [nvme_loop]
 process_one_work+0x56e/0xa70
 worker_thread+0x2d1/0x640
 kthread+0x183/0x1c0
 ret_from_fork+0x1f/0x30

Cc: stable@vger.kernel.org
Fixes: a07b4970

 ("nvmet: add a generic NVMe target")
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit dec9b2f1

 upstream.

There is a very common pattern of using
debugfs_remove(debufs_lookup(..)) which results in a dentry leak of the
dentry that was looked up.  Instead of having to open-code the correct
pattern of calling dput() on the dentry, create
debugfs_lookup_and_remove() to handle this pattern automatically and
properly without any memory leaks.

Cc: stable <stable@kernel.org>
Reported-by: Kuyo Chang <kuyo.chang@mediatek.com>
Tested-by: Kuyo Chang <kuyo.chang@mediatek.com>
Link: https://lore.kernel.org/r/YxIaQ8cSinDR881k@kroah.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 1efda38d upstream.

The system call gate area counts as kernel text but trying
to install a kprobe in this area fails with an Oops later on.
To fix this explicitly disallow the gate area for kprobes.

Found by syzkaller with the following reproducer:
perf_event_open$cgroup(&(0x7f00000001c0)={0x6, 0x80, 0x0, 0x0, 0x0, 0x0, 0x80ffff, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, @perf_config_ext={0x0, 0xffffffffff600000}}, 0xffffffffffffffff, 0x0, 0xffffffffffffffff, 0x0)

Sample report:
BUG: unable to handle page fault for address: fffffbfff3ac6000
PGD 6dfcb067 P4D 6dfcb067 PUD 6df8f067 PMD 6de4d067 PTE 0
Oops: 0000 [#1] PREEMPT SMP KASAN NOPTI
CPU: 0 PID: 21978 Comm: syz-executor.2 Not tainted 6.0.0-rc3-00363-g7726d4c3e60b-dirty #6
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014
RIP: 0010:__insn_get_emulate_prefix arch/x86/lib/insn.c:91 [inline]
RIP: 0010:insn_get_emulate_prefix arch/x86/lib/insn.c:106 [inline]
RIP: 0010:insn_get_prefixes.part.0+0xa8/0x1110 arch/x86/lib/insn.c:134
Code: 49 be 00 00 00 00 00 fc ff df 48 8b 40 60 48 89 44 24 08 e9 81 00 00 00 e8 e5 4b 39 ff 4c 89 fa 4c 89 f9 48 c1 ea 03 83 e1 07 <42> 0f b6 14 32 38 ca 7f 08 84 d2 0f 85 06 10 00 00 48 89 d8 48 89
RSP: 0018:ffffc900088bf860 EFLAGS: 00010246
RAX: 0000000000040000 RBX: ffffffff9b9bebc0 RCX: 0000000000000000
RDX: 1ffffffff3ac6000 RSI: ffffc90002d82000 RDI: ffffc900088bf9e8
RBP: ffffffff9d630001 R08: 0000000000000000 R09: ffffc900088bf9e8
R10: 0000000000000000 R11: 0000000000000001 R12: 0000000000000001
R13: ffffffff9d630000 R14: dffffc0000000000 R15: ffffffff9d630000
FS:  00007f63eef63640(0000) GS:ffff88806d000000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: fffffbfff3ac6000 CR3: 0000000029d90005 CR4: 0000000000770ef0
PKRU: 55555554
Call Trace:
 <TASK>
 insn_get_prefixes arch/x86/lib/insn.c:131 [inline]
 insn_get_opcode arch/x86/lib/insn.c:272 [inline]
 insn_get_modrm+0x64a/0x7b0 arch/x86/lib/insn.c:343
 insn_get_sib+0x29a/0x330 arch/x86/lib/insn.c:421
 insn_get_displacement+0x350/0x6b0 arch/x86/lib/insn.c:464
 insn_get_immediate arch/x86/lib/insn.c:632 [inline]
 insn_get_length arch/x86/lib/insn.c:707 [inline]
 insn_decode+0x43a/0x490 arch/x86/lib/insn.c:747
 can_probe+0xfc/0x1d0 arch/x86/kernel/kprobes/core.c:282
 arch_prepare_kprobe+0x79/0x1c0 arch/x86/kernel/kprobes/core.c:739
 prepare_kprobe kernel/kprobes.c:1160 [inline]
 register_kprobe kernel/kprobes.c:1641 [inline]
 register_kprobe+0xb6e/0x1690 kernel/kprobes.c:1603
 __register_trace_kprobe kernel/trace/trace_kprobe.c:509 [inline]
 __register_trace_kprobe+0x26a/0x2d0 kernel/trace/trace_kprobe.c:477
 create_local_trace_kprobe+0x1f7/0x350 kernel/trace/trace_kprobe.c:1833
 perf_kprobe_init+0x18c/0x280 kernel/trace/trace_event_perf.c:271
 perf_kprobe_event_init+0xf8/0x1c0 kernel/events/core.c:9888
 perf_try_init_event+0x12d/0x570 kernel/events/core.c:11261
 perf_init_event kernel/events/core.c:11325 [inline]
 perf_event_alloc.part.0+0xf7f/0x36a0 kernel/events/core.c:11619
 perf_event_alloc kernel/events/core.c:12059 [inline]
 __do_sys_perf_event_open+0x4a8/0x2a00 kernel/events/core.c:12157
 do_syscall_x64 arch/x86/entry/common.c:50 [inline]
 do_syscall_64+0x38/0x90 arch/x86/entry/common.c:80
 entry_SYSCALL_64_after_hwframe+0x63/0xcd
RIP: 0033:0x7f63ef7efaed
Code: 02 b8 ff ff ff ff c3 66 0f 1f 44 00 00 f3 0f 1e fa 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b0 ff ff ff f7 d8 64 89 01 48
RSP: 002b:00007f63eef63028 EFLAGS: 00000246 ORIG_RAX: 000000000000012a
RAX: ffffffffffffffda RBX: 00007f63ef90ff80 RCX: 00007f63ef7efaed
RDX: 0000000000000000 RSI: ffffffffffffffff RDI: 00000000200001c0
RBP: 00007f63ef86019c R08: 0000000000000000 R09: 0000000000000000
R10: ffffffffffffffff R11: 0000000000000246 R12: 0000000000000000
R13: 0000000000000002 R14: 00007f63ef90ff80 R15: 00007f63eef43000
 </TASK>
Modules linked in:
CR2: fffffbfff3ac6000
---[ end trace 0000000000000000 ]---
RIP: 0010:__insn_get_emulate_prefix arch/x86/lib/insn.c:91 [inline]
RIP: 0010:insn_get_emulate_prefix arch/x86/lib/insn.c:106 [inline]
RIP: 0010:insn_get_prefixes.part.0+0xa8/0x1110 arch/x86/lib/insn.c:134
Code: 49 be 00 00 00 00 00 fc ff df 48 8b 40 60 48 89 44 24 08 e9 81 00 00 00 e8 e5 4b 39 ff 4c 89 fa 4c 89 f9 48 c1 ea 03 83 e1 07 <42> 0f b6 14 32 38 ca 7f 08 84 d2 0f 85 06 10 00 00 48 89 d8 48 89
RSP: 0018:ffffc900088bf860 EFLAGS: 00010246
RAX: 0000000000040000 RBX: ffffffff9b9bebc0 RCX: 0000000000000000
RDX: 1ffffffff3ac6000 RSI: ffffc90002d82000 RDI: ffffc900088bf9e8
RBP: ffffffff9d630001 R08: 0000000000000000 R09: ffffc900088bf9e8
R10: 0000000000000000 R11: 0000000000000001 R12: 0000000000000001
R13: ffffffff9d630000 R14: dffffc0000000000 R15: ffffffff9d630000
FS:  00007f63eef63640(0000) GS:ffff88806d000000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: fffffbfff3ac6000 CR3: 0000000029d90005 CR4: 0000000000770ef0
PKRU: 55555554
==================================================================

Link: https://lkml.kernel.org/r/20220907200917.654103-1-lk@c--e.de

cc: "Naveen N. Rao" <naveen.n.rao@linux.ibm.com>
cc: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com>
cc: "David S. Miller" <davem@davemloft.net>
Cc: stable@vger.kernel.org
Fixes: 1da177e4

 ("Linux-2.6.12-rc2")
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Christian A. Ehrhardt <lk@c--e.de>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit e53f47f6

 upstream.

There may be a bad USB audio device with a USB ID of (0x04fa, 0x4201) and
the number of it's interfaces less than 4, an out-of-bounds read bug occurs
when parsing the interface descriptor for this device.

Fix this by checking the number of interfaces.

Signed-off-by: Dongxiang Ke <kdx.glider@gmail.com>
Link: https://lore.kernel.org/r/20220906024928.10951-1-kdx.glider@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 3e48940a

 upstream.

In loopback_jiffies_timer_pos_update(), we are getting jiffies twice.
First time for playback, second time for capture. Jiffies can be updated
between these two calls and if the capture jiffies is larger, extra zeros
will be filled in the capture buffer.

Change to get jiffies once and use it for both playback and capture.

Signed-off-by: Pattara Teerapong <pteerapong@chromium.org>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20220901144036.4049060-1-pteerapong@chromium.org
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit d29f5905

 upstream.

The voice allocator sometimes begins allocating from near the end of the
array and then wraps around, however snd_emu10k1_pcm_channel_alloc()
accesses the newly allocated voices as if it never wrapped around.

This results in out of bounds access if the first voice has a high enough
index so that first_voice + requested_voice_count > NUM_G (64).
The more voices are requested, the more likely it is for this to occur.

This was initially discovered using PipeWire, however it can be reproduced
by calling aplay multiple times with 16 channels:
aplay -r 48000 -D plughw:CARD=Live,DEV=3 -c 16 /dev/zero

UBSAN: array-index-out-of-bounds in sound/pci/emu10k1/emupcm.c:127:40
index 65 is out of range for type 'snd_emu10k1_voice [64]'
CPU: 1 PID: 31977 Comm: aplay Tainted: G        W IOE      6.0.0-rc2-emu10k1+ #7
Hardware name: ASUSTEK COMPUTER INC P5W DH Deluxe/P5W DH Deluxe, BIOS 3002    07/22/2010
Call Trace:
<TASK>
dump_stack_lvl+0x49/0x63
dump_stack+0x10/0x16
ubsan_epilogue+0x9/0x3f
__ubsan_handle_out_of_bounds.cold+0x44/0x49
snd_emu10k1_playback_hw_params+0x3bc/0x420 [snd_emu10k1]
snd_pcm_hw_params+0x29f/0x600 [snd_pcm]
snd_pcm_common_ioctl+0x188/0x1410 [snd_pcm]
? exit_to_user_mode_prepare+0x35/0x170
? do_syscall_64+0x69/0x90
? syscall_exit_to_user_mode+0x26/0x50
? do_syscall_64+0x69/0x90
? exit_to_user_mode_prepare+0x35/0x170
snd_pcm_ioctl+0x27/0x40 [snd_pcm]
__x64_sys_ioctl+0x95/0xd0
do_syscall_64+0x5c/0x90
? do_syscall_64+0x69/0x90
? do_syscall_64+0x69/0x90
entry_SYSCALL_64_after_hwframe+0x63/0xcd

Signed-off-by: Tasos Sahanidis <tasos@tasossah.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/3707dcab-320a-62ff-63c0-73fc201ef756@tasossah.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit b8983d42

 ]

The mmVM_L2_CNTL3 register is not assigned an initial value

Signed-off-by: Qu Huang <jinsdb@126.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 07c55c98

 ]

Add missing pci_disable_device() in error path in chipsfb_pci_init().

Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit e75d18ce ]

Though acpi_find_last_cache_level() always returned signed value and the
document states it will return any errors caused by lack of a PPTT table,
it never returned negative values before.

Commit 0c80f9e1

 ("ACPI: PPTT: Leave the table mapped for the runtime usage")
however changed it by returning -ENOENT if no PPTT was found. The value
returned from acpi_find_last_cache_level() is then assigned to unsigned
fw_level.

It will result in the number of cache leaves calculated incorrectly as
a huge value which will then cause the following warning from __alloc_pages
as the order would be great than MAX_ORDER because of incorrect and huge
cache leaves value.

  |  WARNING: CPU: 0 PID: 1 at mm/page_alloc.c:5407 __alloc_pages+0x74/0x314
  |  Modules linked in:
  |  CPU: 0 PID: 1 Comm: swapper/0 Not tainted 5.19.0-10393-g7c2a8d3ac4c0 #73
  |  pstate: 20000005 (nzCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
  |  pc : __alloc_pages+0x74/0x314
  |  lr : alloc_pages+0xe8/0x318
  |  Call trace:
  |   __alloc_pages+0x74/0x314
  |   alloc_pages+0xe8/0x318
  |   kmalloc_order_trace+0x68/0x1dc
  |   __kmalloc+0x240/0x338
  |   detect_cache_attributes+0xe0/0x56c
  |   update_siblings_masks+0x38/0x284
  |   store_cpu_topology+0x78/0x84
  |   smp_prepare_cpus+0x48/0x134
  |   kernel_init_freeable+0xc4/0x14c
  |   kernel_init+0x2c/0x1b4
  |   ret_from_fork+0x10/0x20

Fix the same by changing fw_level to be signed integer and return the
error from init_cache_level() early in case of error.

Reported-and-Tested-by: Bruno Goncalves <bgoncalv@redhat.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Link: https://lore.kernel.org/r/20220808084640.3165368-1-sudeep.holla@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 591d2108

 ]

If a 32-bit kernel was compiled for PA2.0 CPUs, it won't be able to run
on machines with PA1.x CPUs. Add a check and bail out early if a PA1.x
machine is detected.

Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit d46c742f

 ]

As the possible failure of the kmalloc(), it should be better
to fix this error path, check and return '-ENOMEM' error code.

Signed-off-by: Li Qiong <liqiong@nfschina.com>
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit f461950f

 ]

Although radeon card fence and wait for gpu to finish processing current batch rings,
there is still a corner case that radeon lockup work queue may not be fully flushed,
and meanwhile the radeon_suspend_kms() function has called pci_set_power_state() to
put device in D3hot state.
Per PCI spec rev 4.0 on 5.3.1.4.1 D3hot State.
> Configuration and Message requests are the only TLPs accepted by a Function in
> the D3hot state. All other received Requests must be handled as Unsupported Requests,
> and all received Completions may optionally be handled as Unexpected Completions.
This issue will happen in following logs:
Unable to handle kernel paging request at virtual address 00008800e0008010
CPU 0 kworker/0:3(131): Oops 0
pc = [<ffffffff811bea5c>]  ra = [<ffffffff81240844>]  ps = 0000 Tainted: G        W
pc is at si_gpu_check_soft_reset+0x3c/0x240
ra is at si_dma_is_lockup+0x34/0xd0
v0 = 0000000000000000  t0 = fff08800e0008010  t1 = 0000000000010000
t2 = 0000000000008010  t3 = fff00007e3c00000  t4 = fff00007e3c00258
t5 = 000000000000ffff  t6 = 0000000000000001  t7 = fff00007ef078000
s0 = fff00007e3c016e8  s1 = fff00007e3c00000  s2 = fff00007e3c00018
s3 = fff00007e3c00000  s4 = fff00007fff59d80  s5 = 0000000000000000
s6 = fff00007ef07bd98
a0 = fff00007e3c00000  a1 = fff00007e3c016e8  a2 = 0000000000000008
a3 = 0000000000000001  a4 = 8f5c28f5c28f5c29  a5 = ffffffff810f4338
t8 = 0000000000000275  t9 = ffffffff809b66f8  t10 = ff6769c5d964b800
t11= 000000000000b886  pv = ffffffff811bea20  at = 0000000000000000
gp = ffffffff81d89690  sp = 00000000aa814126
Disabling lock debugging due to kernel taint
Trace:
[<ffffffff81240844>] si_dma_is_lockup+0x34/0xd0
[<ffffffff81119610>] radeon_fence_check_lockup+0xd0/0x290
[<ffffffff80977010>] process_one_work+0x280/0x550
[<ffffffff80977350>] worker_thread+0x70/0x7c0
[<ffffffff80977410>] worker_thread+0x130/0x7c0
[<ffffffff80982040>] kthread+0x200/0x210
[<ffffffff809772e0>] worker_thread+0x0/0x7c0
[<ffffffff80981f8c>] kthread+0x14c/0x210
[<ffffffff80911658>] ret_from_kernel_thread+0x18/0x20
[<ffffffff80981e40>] kthread+0x0/0x210
 Code: ad3e0008  43f0074a  ad7e0018  ad9e0020  8c3001e8  40230101
 <88210000> 4821ed21
So force lockup work queue flush to fix this problem.

Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Zhenneng Li <lizhenneng@kylinos.cn>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit c3519383

 ]

No need to set up rb when no gfx rings.

Signed-off-by: Candice Li <candice.li@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit ea2aa97c

 ]

Currently we are assuming a one to one mapping between dmabuf and
GEM handle when releasing GEM handles.

But that is not always true, since we would create extra handles for the
GEM obj in cases like gem_open() and getfb{,2}().

A similar issue was reported at:
https://lore.kernel.org/all/20211105083308.392156-1-jay.xu@rock-chips.com/

Another problem is that the imported dmabuf might not always have
gem_obj->dma_buf set, which would cause leaks in
drm_gem_remove_prime_handles().

Let's fix these for now by using handle to find the exact map to remove.

Signed-off-by: Jeffy Chen <jeffy.chen@rock-chips.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220819072834.17888-1-jeffy.chen@rock-chips.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 8c499e49

 ]

When allocating log_to_span fails, kfree(instance->ctrl_context) is called
twice. Remove redundant call.

Link: https://lore.kernel.org/r/1659424729-46502-1-git-send-email-kanie@linux.alibaba.com
Acked-by: Sumit Saxena <sumit.saxena@broadcom.com>
Signed-off-by: Guixin Liu <kanie@linux.alibaba.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

commit 41ca302a

 upstream.

At least one older CH341 appears to have the RX timer enable bit
inverted so that setting it disables the RX timer and prevents the FIFO
from emptying until it is full.

Only set the RX timer enable bit for devices with version newer than
0x27 (even though this probably affects all pre-0x30 devices).

Reported-by: Jonathan Woithe <jwoithe@just42.net>
Tested-by: Jonathan Woithe <jwoithe@just42.net>
Link: https://lore.kernel.org/r/Ys1iPTfiZRWj2gXs@marvin.atrad.com.au
Fixes: 4e46c410

 ("USB: serial: ch341: reinitialize chip on reconfiguration")
Cc: stable@vger.kernel.org      # 4.10
Signed-off-by: Johan Hovold <johan@kernel.org>
[ johan: backport to 5.4 ]
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 8e83622a

 upstream.

Disable LCR updates for pre-0x30 devices which use a different (unknown)
protocol for line control and where the current register write causes
the next received character to be lost.

Note that updating LCR using the INIT command has no effect on these
devices either.

Reported-by: Jonathan Woithe <jwoithe@just42.net>
Tested-by: Jonathan Woithe <jwoithe@just42.net>
Link: https://lore.kernel.org/r/Ys1iPTfiZRWj2gXs@marvin.atrad.com.au
Fixes: 4e46c410 ("USB: serial: ch341: reinitialize chip on reconfiguration")
Fixes: 55fa15b5

 ("USB: serial: ch341: fix baud rate and line-control handling")
Cc: stable@vger.kernel.org      # 4.10
Signed-off-by: Johan Hovold <johan@kernel.org>
[ johan: adjust context to 5.4 ]
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 6000b8d9 upstream.

The dwc3 driver manages its PHYs itself so the USB core PHY management
needs to be disabled.

Use the struct xhci_plat_priv hack added by commits 46034a99 ("usb:
host: xhci-plat: add platform data support") and f768e718 ("usb:
host: xhci-plat: add priv quirk for skip PHY initialization") to
propagate the setting for now.

Fixes: 4e88d4c0 ("usb: add a flag to skip PHY initialization to struct usb_hcd")
Fixes: 178a0bce

 ("usb: core: hcd: integrate the PHY wrapper into the HCD core")
Tested-by: Matthias Kaehlcke <mka@chromium.org>
Cc: stable <stable@kernel.org>
Reviewed-by: Matthias Kaehlcke <mka@chromium.org>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20220825131836.19769-1-johan+linaro@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ johan: adjust context to 5.15 ]
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit d2ac7bef upstream.

Generic PHYs must be powered-off before they can be tore down.

Similarly, suspending legacy PHYs after having powered them off makes no
sense.

Fix the dwc3_core_exit() (e.g. called during suspend) and open-coded
dwc3_probe() error-path sequences that got this wrong.

Note that this makes dwc3_core_exit() match the dwc3_core_init() error
path with respect to powering off the PHYs.

Fixes: 03c1fd62 ("usb: dwc3: core: add phy cleanup for probe error handling")
Fixes: c499ff71

 ("usb: dwc3: core: re-factor init and exit paths")
Cc: stable@vger.kernel.org      # 4.8
Reviewed-by: Andrew Halaney <ahalaney@redhat.com>
Reviewed-by: Matthias Kaehlcke <mka@chromium.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20220804151001.23612-2-johan+linaro@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ johan: adjust context to 5.15 ]
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 770c79fb

 upstream.

Identifying and removing the stale device from the fs_uuids list is done
by btrfs_free_stale_devices().  btrfs_free_stale_devices() in turn
depends on device_path_matched() to check if the device appears in more
than one btrfs_device structure.

The matching of the device happens by its path, the device path. However,
when device mapper is in use, the dm device paths are nothing but a link
to the actual block device, which leads to the device_path_matched()
failing to match.

Fix this by matching the dev_t as provided by lookup_bdev() instead of
plain string compare of the device paths.

Reported-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 919bef7a upstream.

The quirk added in upstream commit 90c3e219

 ("drm/i915/glk: Add
Quirk for GLK NUC HDMI port issues.") is also required on the ECS Liva
Q2.

Note: Would be nicer to figure out the extra delay required for the
retimer without quirks, however don't know how to check for that.

Cc: stable@vger.kernel.org
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/1326
Signed-off-by: Diego Santa Cruz <Diego.SantaCruz@spinetix.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220616124137.3184371-1-jani.nikula@intel.com
(cherry picked from commit 08e9505f

)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 3e7e04b7

 upstream.

It's been reported that there is a possible data-race accessing to the
global card_requested[] array at ALSA sequencer core, which is used
for determining whether to call request_module() for the card or not.
This data race itself is almost harmless, as it might end up with one
extra request_module() call for the already loaded module at most.
But it's still better to fix.

This patch addresses the possible data race of card_requested[] and
client_requested[] arrays by replacing them with bitmask.
It's an atomic operation and can work without locks.

Reported-by: Abhishek Shah <abhishek.shah@columbia.edu>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/CAEHB24_ay6YzARpA1zgCsE7=H9CSJJzux618E=Ka4h0YdKn=qA@mail.gmail.com
Link: https://lore.kernel.org/r/20220823072717.1706-2-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 22dec134

 upstream.

ALSA OSS sequencer refers to a global variable max_midi_devs at
creating a new port, storing it to its own field.  Meanwhile this
variable may be changed by other sequencer events at
snd_seq_oss_midi_check_exit_port() in parallel, which may cause a data
race.

OTOH, this data race itself is almost harmless, as the access to the
MIDI device is done via get_mdev() and it's protected with a refcount,
hence its presence is guaranteed.

Though, it's sill better to address the data-race from the code sanity
POV, and this patch adds the proper spinlock for the protection.

Reported-by: Abhishek Shah <abhishek.shah@columbia.edu>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/CAEHB2493pZRXs863w58QWnUTtv3HHfg85aYhLn5HJHCwxqtHQg@mail.gmail.com
Link: https://lore.kernel.org/r/20220823072717.1706-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit f0da4711 upstream.

Upon reception, a packet must be categorized, either it's destination is
the host, or it is another host. A packet with no destination addressing
fields may be valid in two situations:
- the packet has no source field: only ACKs are built like that, we
  consider the host as the destination.
- the packet has a valid source field: it is directed to the PAN
  coordinator, as for know we don't have this information we consider we
  are not the PAN coordinator.

There was likely a copy/paste error made during a previous cleanup
because the if clause is now containing exactly the same condition as in
the switch case, which can never be true. In the past the destination
address was used in the switch and the source address was used in the
if, which matches what the spec says.

Cc: stable@vger.kernel.org
Fixes: ae531b94

 ("ieee802154: use ieee802154_addr instead of *_sa variants")
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/r/20220826142954.254853-1-miquel.raynal@bootlin.com
Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit eb55dc09 upstream.

__mkroute_input() uses fib_validate_source() to trigger an icmp redirect.
My understanding is that fib_validate_source() is used to know if the src
address and the gateway address are on the same link. For that,
fib_validate_source() returns 1 (same link) or 0 (not the same network).
__mkroute_input() is the only user of these positive values, all other
callers only look if the returned value is negative.

Since the below patch, fib_validate_source() didn't return anymore 1 when
both addresses are on the same network, because the route lookup returns
RT_SCOPE_LINK instead of RT_SCOPE_HOST. But this is, in fact, right.
Let's adapat the test to return 1 again when both addresses are on the same
link.

CC: stable@vger.kernel.org
Fixes: 747c1430

 ("ip: fix dflt addr selection for connected nexthop")
Reported-by: kernel test robot <yujie.liu@intel.com>
Reported-by: Heng Qi <hengqi@linux.alibaba.com>
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/20220829100121.3821-1-nicolas.dichtel@6wind.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 15bc8966 upstream.

When we are not connected to a channel, sending channel "switch"
announcement doesn't make any sense.

The BSS list is empty in that case. This causes the for loop in
cfg80211_get_bss() to be bypassed, so the function returns NULL
(check line 1424 of net/wireless/scan.c), causing the WARN_ON()
in ieee80211_ibss_csa_beacon() to get triggered (check line 500
of net/mac80211/ibss.c), which was consequently reported on the
syzkaller dashboard.

Thus, check if we have an existing connection before generating
the CSA beacon in ieee80211_ibss_finish_csa().

Cc: stable@vger.kernel.org
Fixes: cd7760e6

 ("mac80211: add support for CSA in IBSS mode")
Link: https://syzkaller.appspot.com/bug?id=05603ef4ae8926761b678d2939a3b2ad28ab9ca6
Reported-by:  <syzbot+b6c9fe29aefe68e4ad34@syzkaller.appspotmail.com>
Signed-off-by: Siddh Raman Pant <code@siddh.me>
Tested-by:  <syzbot+b6c9fe29aefe68e4ad34@syzkaller.appspotmail.com>
Link: https://lore.kernel.org/r/20220814151512.9985-1-code@siddh.me
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 25e9fbf0 upstream.

Both __device_attach_driver() and __driver_attach() check the return
code of the bus_type.match() function to see if the device needs to be
added to the deferred probe list. After adding the device to the list,
the logic attempts to bind the device to the driver anyway, as if the
device had matched with the driver, which is not correct.

If __device_attach_driver() detects that the device in question is not
ready to match with a driver on the bus, then it doesn't make sense for
the device to attempt to bind with the current driver or continue
attempting to match with any of the other drivers on the bus. So, update
the logic in __device_attach_driver() to reflect this.

If __driver_attach() detects that a driver tried to match with a device
that is not ready to match yet, then the driver should not attempt to bind
with the device. However, the driver can still attempt to match and bind
with other devices on the bus, as drivers can be bound to multiple
devices. So, update the logic in __driver_attach() to reflect this.

Fixes: 656b8035

 ("ARM: 8524/1: driver cohandle -EPROBE_DEFER from bus_type.match()")
Cc: stable@vger.kernel.org
Cc: Saravana Kannan <saravanak@google.com>
Reported-by: Guenter Roeck <linux@roeck-us.net>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Tested-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Saravana Kannan <saravanak@google.com>
Signed-off-by: Isaac J. Manjarres <isaacmanjarres@google.com>
Link: https://lore.kernel.org/r/20220817184026.3468620-1-isaacmanjarres@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 9d4dc16e upstream.

During cdrom emulation, the response to read_toc command must contain
the cdrom address as the number of sectors (2048 byte sized blocks)
represented either as an absolute value (when MSF bit is '0') or in
terms of PMin/PSec/PFrame (when MSF bit is set to '1'). Incase of
cdrom, the fsg_lun_open call sets the sector size to 2048 bytes.

When MAC OS sends a read_toc request with MSF set to '1', the
store_cdrom_address assumes that the address being provided is the
LUN size represented in 512 byte sized blocks instead of 2048. It
tries to modify the address further to convert it to 2048 byte sized
blocks and store it in MSF format. This results in data transfer
failures as the cdrom address being provided in the read_toc response
is incorrect.

Fixes: 3f565a36

 ("usb: gadget: storage: adapt logic block size to bound block devices")
Cc: stable@vger.kernel.org
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Krishna Kurapati <quic_kriskura@quicinc.com>
Link: https://lore.kernel.org/r/1661570110-19127-1-git-send-email-quic_kriskura@quicinc.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 9c6d7788

 upstream.

Automatic kernel fuzzing revealed a recursive locking violation in
usb-storage:

============================================
WARNING: possible recursive locking detected
5.18.0 #3 Not tainted
--------------------------------------------
kworker/1:3/1205 is trying to acquire lock:
ffff888018638db8 (&us_interface_key[i]){+.+.}-{3:3}, at:
usb_stor_pre_reset+0x35/0x40 drivers/usb/storage/usb.c:230

but task is already holding lock:
ffff888018638db8 (&us_interface_key[i]){+.+.}-{3:3}, at:
usb_stor_pre_reset+0x35/0x40 drivers/usb/storage/usb.c:230

...

stack backtrace:
CPU: 1 PID: 1205 Comm: kworker/1:3 Not tainted 5.18.0 #3
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS
1.13.0-1ubuntu1.1 04/01/2014
Workqueue: usb_hub_wq hub_event
Call Trace:
<TASK>
__dump_stack lib/dump_stack.c:88 [inline]
dump_stack_lvl+0xcd/0x134 lib/dump_stack.c:106
print_deadlock_bug kernel/locking/lockdep.c:2988 [inline]
check_deadlock kernel/locking/lockdep.c:3031 [inline]
validate_chain kernel/locking/lockdep.c:3816 [inline]
__lock_acquire.cold+0x152/0x3ca kernel/locking/lockdep.c:5053
lock_acquire kernel/locking/lockdep.c:5665 [inline]
lock_acquire+0x1ab/0x520 kernel/locking/lockdep.c:5630
__mutex_lock_common kernel/locking/mutex.c:603 [inline]
__mutex_lock+0x14f/0x1610 kernel/locking/mutex.c:747
usb_stor_pre_reset+0x35/0x40 drivers/usb/storage/usb.c:230
usb_reset_device+0x37d/0x9a0 drivers/usb/core/hub.c:6109
r871xu_dev_remove+0x21a/0x270 drivers/staging/rtl8712/usb_intf.c:622
usb_unbind_interface+0x1bd/0x890 drivers/usb/core/driver.c:458
device_remove drivers/base/dd.c:545 [inline]
device_remove+0x11f/0x170 drivers/base/dd.c:537
__device_release_driver drivers/base/dd.c:1222 [inline]
device_release_driver_internal+0x1a7/0x2f0 drivers/base/dd.c:1248
usb_driver_release_interface+0x102/0x180 drivers/usb/core/driver.c:627
usb_forced_unbind_intf+0x4d/0xa0 drivers/usb/core/driver.c:1118
usb_reset_device+0x39b/0x9a0 drivers/usb/core/hub.c:6114

This turned out not to be an error in usb-storage but rather a nested
device reset attempt.  That is, as the rtl8712 driver was being
unbound from a composite device in preparation for an unrelated USB
reset (that driver does not have pre_reset or post_reset callbacks),
its ->remove routine called usb_reset_device() -- thus nesting one
reset call within another.

Performing a reset as part of disconnect processing is a questionable
practice at best.  However, the bug report points out that the USB
core does not have any protection against nested resets.  Adding a
reset_in_progress flag and testing it will prevent such errors in the
future.

Link: https://lore.kernel.org/all/CAB7eexKUpvX-JNiLzhXBDWgfg2T9e9_0Tw4HQ6keN==voRbP0g@mail.gmail.com/
Cc: stable@vger.kernel.org
Reported-and-tested-by: Rondreis <linhaoguo86@gmail.com>
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Link: https://lore.kernel.org/r/YwkflDxvg0KWqyZK@rowland.harvard.edu
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit c9305b6c upstream.

Add proper alignment for .nospec_call_table and .nospec_return_table in
vmlinux.

[hca@linux.ibm.com]: The problem with the missing alignment of the nospec
tables exist since a long time, however only since commit e6ed91fd
("s390/alternatives: remove padding generation code") and with
CONFIG_RELOCATABLE=n the kernel may also crash at boot time.

The above named commit reduced the size of struct alt_instr by one byte,
so its new size is 11 bytes. Therefore depending on the number of cpu
alternatives the size of the __alt_instructions array maybe odd, which
again also causes that the addresses of the nospec tables will be odd.

If the address of __nospec_call_start is odd and the kernel is compiled
With CONFIG_RELOCATABLE=n the compiler may generate code that loads the
address of __nospec_call_start with a 'larl' instruction.

This will generate incorrect code since the 'larl' instruction only works
with even addresses. In result the members of the nospec tables will be
accessed with an off-by-one offset, which subsequently may lead to
addressing exceptions within __nospec_revert().

Fixes: f19fbd5e

 ("s390: introduce execute-trampolines for branches")
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
Link: https://lore.kernel.org/r/8719bf1ce4a72ebdeb575200290094e9ce047bcc.1661557333.git.jpoimboe@kernel.org
Cc: <stable@vger.kernel.org> # 4.16
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 7c8d42fd upstream.

The alignment check in prepare_hugepage_range() is wrong for 2 GB
hugepages, it only checks for 1 MB hugepage alignment.

This can result in kernel crash in __unmap_hugepage_range() at the
BUG_ON(start & ~huge_page_mask(h)) alignment check, for mappings
created with MAP_FIXED at unaligned address.

Fix this by correctly handling multiple hugepage sizes, similar to the
generic version of prepare_hugepage_range().

Fixes: d08de8e2

 ("s390/mm: add support for 2GB hugepages")
Cc: <stable@vger.kernel.org> # 4.8+
Acked-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Gerald Schaefer <gerald.schaefer@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 2aa48857

 upstream.

This is USB mass storage primary boot loader for code download on
NXP PN7462AU.

Without the quirk it is impossible to write whole memory at once as
device restarts during the write due to bogus residue values reported.

Acked-by: Alan Stern <stern@rowland.harvard.edu>
Cc: stable <stable@kernel.org>
Signed-off-by: Witold Lipieta <witold.lipieta@thaumatec.com>
Link: https://lore.kernel.org/r/20220809112911.462776-1-witold.lipieta@thaumatec.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit a10bc717

 upstream.

Supports for ICOM F3400 and ICOM F4400 PMR radios in CDC-ACM driver
enabling the AT serial port.
The Vendor Id is 0x0C26
The Product ID is 0x0020

Output of lsusb :
Bus 001 Device 009: ID 0c26:0020 Prolific Technology Inc. ICOM Radio
Couldn't open device, some information will be missing
Device Descriptor:
  bLength                18
  bDescriptorType         1
  bcdUSB               2.00
  bDeviceClass            2 Communications
  bDeviceSubClass         0
  bDeviceProtocol         0
  bMaxPacketSize0        64
  idVendor           0x0c26 Prolific Technology Inc.
  idProduct          0x0020
  bcdDevice            0.00
  iManufacturer           1 ICOM Inc.
  iProduct                2 ICOM Radio
  iSerial                 3 *obfuscated*
  bNumConfigurations      1
  Configuration Descriptor:
    bLength                 9
    bDescriptorType         2
    wTotalLength       0x0030
    bNumInterfaces          2
    bConfigurationValue     1
    iConfiguration          0
    bmAttributes         0xc0
      Self Powered
    MaxPower                0mA
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        0
      bAlternateSetting       0
      bNumEndpoints           1
      bInterfaceClass         2 Communications
      bInterfaceSubClass      2 Abstract (modem)
      bInterfaceProtocol      1 AT-commands (v.25ter)
      iInterface              0
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x83  EP 3 IN
        bmAttributes            3
          Transfer Type            Interrupt
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0040  1x 64 bytes
        bInterval              12
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        1
      bAlternateSetting       0
      bNumEndpoints           2
      bInterfaceClass        10 CDC Data
      bInterfaceSubClass      0
      bInterfaceProtocol      0
      iInterface              0
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x82  EP 2 IN
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0200  1x 512 bytes
        bInterval               0
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x02  EP 2 OUT
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0200  1x 512 bytes
        bInterval               0

Signed-off-by: Thierry GUIBERT <thierry.guibert@croix-rouge.fr>
Cc: stable <stable@kernel.org>
Link: https://lore.kernel.org/r/20220819081702.84118-1-thierry.guibert@croix-rouge.fr
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit f9b995b4 upstream.

Since 1599069a ("phy: core: Warn when phy_power_on is called before
phy_init") the driver complains. In my case (Amlogic SoC) the warning
is: phy phy-fe03e000.phy.2: phy_power_on was called before phy_init
So change the order of the two calls. The same change has to be done
to the order of phy_exit() and phy_power_off().

Fixes: 09a75e85

 ("usb: dwc2: refactor common low-level hw code to platform.c")
Cc: stable@vger.kernel.org
Acked-by: Minas Harutyunyan <hminas@synopsys.com>
Acked-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Link: https://lore.kernel.org/r/dfcc6b40-2274-4e86-e73c-5c5e6aa3e046@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit c1e5c2f0 upstream.

Fix incorrect pin assignment values when connecting to a monitor with
Type-C receptacle instead of a plug.

According to specification, an UFP_D receptacle's pin assignment
should came from the UFP_D pin assignments field (bit 23:16), while
an UFP_D plug's assignments are described in the DFP_D pin assignments
(bit 15:8) during Mode Discovery.

For example the LG 27 UL850-W is a monitor with Type-C receptacle.
The monitor responds to MODE DISCOVERY command with following
DisplayPort Capability flag:

        dp->alt->vdo=0x140045

The existing logic only take cares of UPF_D plug case,
and would take the bit 15:8 for this 0x140045 case.

This results in an non-existing pin assignment 0x0 in
dp_altmode_configure.

To fix this problem a new set of macros are introduced
to take plug/receptacle differences into consideration.

Fixes: 0e3bb7d6

 ("usb: typec: Add driver for DisplayPort alternate mode")
Cc: stable@vger.kernel.org
Co-developed-by: Pablo Sun <pablo.sun@mediatek.com>
Co-developed-by: Macpaul Lin <macpaul.lin@mediatek.com>
Reviewed-by: Guillaume Ranquet <granquet@baylibre.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Pablo Sun <pablo.sun@mediatek.com>
Signed-off-by: Macpaul Lin <macpaul.lin@mediatek.com>
Link: https://lore.kernel.org/r/20220804034803.19486-1-macpaul.lin@mediatek.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 8ffe20d0

 upstream.

We added PIDs for MV32-WA/WB MBIM mode before, now we need to add
support for RmNet mode.

Test evidence as below:
T:  Bus=03 Lev=01 Prnt=01 Port=02 Cnt=03 Dev#=  3 Spd=480 MxCh= 0
D:  Ver= 2.10 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs=  1
P:  Vendor=1e2d ProdID=00f3 Rev=05.04
S:  Manufacturer=Cinterion
S:  Product=Cinterion PID 0x00F3 USB Mobile Broadband
S:  SerialNumber=d7b4be8d
C:  #Ifs= 4 Cfg#= 1 Atr=a0 MxPwr=500mA
I:  If#=0x0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=50 Driver=qmi_wwan
I:  If#=0x1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option
I:  If#=0x2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option
I:  If#=0x3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option

T:  Bus=03 Lev=01 Prnt=01 Port=02 Cnt=03 Dev#= 10 Spd=480 MxCh= 0
D:  Ver= 2.10 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs=  1
P:  Vendor=1e2d ProdID=00f4 Rev=05.04
S:  Manufacturer=Cinterion
S:  Product=Cinterion PID 0x00F4 USB Mobile Broadband
S:  SerialNumber=d095087d
C:  #Ifs= 4 Cfg#= 1 Atr=a0 MxPwr=500mA
I:  If#=0x0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=50 Driver=qmi_wwan
I:  If#=0x1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option
I:  If#=0x2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option
I:  If#=0x3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option

Signed-off-by: Slark Xiao <slark_xiao@163.com>
[ johan: sort entries ]
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit f766f3ab

 upstream.

Add usb product id entry for the Quectel EM060K module.

"MBIM mode": DIAG + NMEA + AT + MODEM + MBIM + QDSS

T:  Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#=  8 Spd=480  MxCh= 0
D:  Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
P:  Vendor=2c7c ProdID=030b Rev= 5.04
S:  Manufacturer=Quectel
S:  Product=EM060K-GL
S:  SerialNumber=89fb57db
C:* #Ifs= 7 Cfg#= 1 Atr=a0 MxPwr=500mA
A:  FirstIf#= 8 IfCount= 2 Cls=02(comm.) Sub=0e Prot=00
I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option
E:  Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=40 Driver=option
E:  Ad=83(I) Atr=03(Int.) MxPS=  10 Ivl=32ms
E:  Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option
E:  Ad=85(I) Atr=03(Int.) MxPS=  10 Ivl=32ms
E:  Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option
E:  Ad=87(I) Atr=03(Int.) MxPS=  10 Ivl=32ms
E:  Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 8 Alt= 0 #EPs= 1 Cls=02(comm.) Sub=0e Prot=00 Driver=cdc_mbim
E:  Ad=88(I) Atr=03(Int.) MxPS=  64 Ivl=32ms
I:  If#= 9 Alt= 0 #EPs= 0 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim
I:* If#= 9 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim
E:  Ad=8e(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=0f(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#=12 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=70 Driver=(none)
E:  Ad=89(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms

Signed-off-by: Yonglin Tan <yonglin.tan@outlook.com>
[ johan: mention QDSS port and sort entries ]
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 8d5fc280

 upstream.

Add support for OPPO R11 USB diag serial port to option driver. This
phone uses Qualcomm Snapdragon 660 SoC.

usb-devices output:
T:  Bus=03 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 10 Spd=480 MxCh= 0
D:  Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
P:  Vendor=22d9 ProdID=276c Rev=04.04
S:  Manufacturer=OPPO
S:  Product=SDM660-MTP _SN:09C6BCA7
S:  SerialNumber=beb2c403
C:  #Ifs= 2 Cfg#= 1 Atr=80 MxPwr=500mA
I:  If#=0x0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option
I:  If#=0x1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=usbfs

Signed-off-by: Yan Xinyu <sdlyyxy@bupt.edu.cn>
Link: https://lore.kernel.org/r/20220714102037.4113889-1-sdlyyxy@bupt.edu.cn
Link: https://lore.kernel.org/r/Yt1WfSZk03Plpnan@hovoldconsulting.com
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit ceb40384

 upstream.

Add the device id for Decagon Devices USB Cable Adapter.

Link: https://lore.kernel.org/r/trinity-819f9db2-d3e1-40e9-a669-9c245817c046-1661523546680@msvc-mesg-web108
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 33e32158

 upstream.

After xHC controller is started, either in probe or resume, it can take
a while before any of the connected usb devices are visible to the roothub
due to link training.

It's possible xhci driver loads, sees no acivity and suspends the host
before the USB device is visible.

In one testcase with a hotplugged xHC controller the host finally detected
the connected USB device and generated a wake 500ms after host initial
start.

If hosts didn't suspend the device duringe training it probablty wouldn't
take up to 500ms to detect it, but looking at specs reveal USB3 link
training has a couple long timeout values, such as 120ms
RxDetectQuietTimeout, and 360ms PollingLFPSTimeout.

So Add a 500ms grace period that keeps polling the roothub for 500ms after
start, preventing runtime suspend until USB devices are detected.

Cc: stable@vger.kernel.org
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20220825150840.132216-3-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>