- Aug 09, 2021
-
-
Randy Dunlap authored
GCC complains about empty macros in an 'if' statement, so convert them to 'do {} while (0)' macros. Fixes these build warnings: net/dccp/output.c: In function 'dccp_xmit_packet': ../net/dccp/output.c:283:71: warning: suggest braces around empty body in an 'if' statement [-Wempty-body] 283 | dccp_pr_debug("transmit_skb() returned err=%d\n", err); net/dccp/ackvec.c: In function 'dccp_ackvec_update_old': ../net/dccp/ackvec.c:163:80: warning: suggest braces around empty body in an 'else' statement [-Wempty-body] 163 | (unsigned long long)seqno, state); Fixes: dc841e30 ("dccp: Extend CCID packet dequeueing interface") Fixes: 38024086 ("dccp ccid-2: Update code for the Ack Vector input/registration routine") Signed-off-by:
Randy Dunlap <rdunlap@infradead.org> Cc: dccp@vger.kernel.org Cc: "David S. Miller" <davem@davemloft.net> Cc: Jakub Kicinski <kuba@kernel.org> Cc: Gerrit Renker <ge...
-
- Aug 08, 2021
-
-
Pali Rohár authored
When registering new ppp interface via PPPIOCNEWUNIT ioctl then kernel has to choose interface name as this ioctl API does not support specifying it. Kernel in this case register new interface with name "ppp<id>" where <id> is the ppp unit id, which can be obtained via PPPIOCGUNIT ioctl. This applies also in the case when registering new ppp interface via rtnl without supplying IFLA_IFNAME. PPPIOCNEWUNIT ioctl allows to specify own ppp unit id which will kernel assign to ppp interface, in case this ppp id is not already used by other ppp interface. In case user does not specify ppp unit id then kernel choose the first free ppp unit id. This applies also for case when creating ppp interface via rtnl method as it does not provide a way for specifying own ppp unit id. If some network interface (does not have to be ppp) has name "ppp<id>" with this first free ppp id then PPPIOCNEWUNIT ioctl or rtnl call fails. And registering new ppp interface is not possible anymore, until interface which holds conflicting name is renamed. Or when using rtnl method with custom interface name in IFLA_IFNAME. As list of allocated / used ppp unit ids is not possible to retrieve from kernel to userspace, userspace has no idea what happens nor which interface is doing this conflict. So change the algorithm how ppp unit id is generated. And choose the first number which is not neither used as ppp unit id nor in some network interface with pattern "ppp<id>". This issue can be simply reproduced by following pppd call when there is no ppp interface registered and also no interface with name pattern "ppp<id>": pppd ifname ppp1 +ipv6 noip noauth nolock local nodetach pty "pppd +ipv6 noip noauth nolock local nodetach notty" Or by creating the one ppp interface (which gets assigned ppp unit id 0), renaming it to "ppp1" and then trying to create a new ppp interface (which will always fails as next free ppp unit id is 1, but network interface with name "ppp1" exists). This patch fixes above described issue by generating new and new ppp unit id until some non-conflicting id with network interfaces is generated. Signed-off-by:
Pali Rohár <pali@kernel.org> Cc: stable@vger.kernel.org Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Pali Rohár authored
IFLA_IFNAME is nul-term string which means that IFLA_IFNAME buffer can be larger than length of string which contains. Function __rtnl_newlink() generates new own ifname if either IFLA_IFNAME was not specified at all or userspace passed empty nul-term string. It is expected that if userspace does not specify ifname for new ppp netdev then kernel generates one in format "ppp<id>" where id matches to the ppp unit id which can be later obtained by PPPIOCGUNIT ioctl. And it works in this way if IFLA_IFNAME is not specified at all. But it does not work when IFLA_IFNAME is specified with empty string. So fix this logic also for empty IFLA_IFNAME in ppp_nl_newlink() function and correctly generates ifname based on ppp unit identifier if userspace did not provided preferred ifname. Without this patch when IFLA_IFNAME was specified with empty string then kernel created a new ppp interface in format "ppp<id>" but id did not match ppp unit id returned by PPPIOCGUNIT ioctl. In this case id was some number generated by __rtnl_newlink() function. Signed-off-by:
Pali Rohár <pali@kernel.org> Fixes: bb8082f6 ("ppp: build ifname using unit identifier for rtnl based devices") Signed-off-by:
David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Michael Chan says: ==================== bnxt_en: PTP fixes This series includes 2 fixes for the PTP feature. Update to the new firmware interface so that the driver can pass the PTP sequence number header offset of TX packets to the firmware. This is needed for all PTP packet types (v1, v2, with or without VLAN) to work. The 2nd fix is to use a different register window to read the PHC to avoid conflict with an older Broadcom tool. ==================== Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Michael Chan authored
Some older Broadcom debug tools use window 5 and may conflict, so switch to use window 6 instead. Fixes: 118612d5 ("bnxt_en: Add PTP clock APIs, ioctls, and ethtool methods") Reviewed-by:
Andy Gospodarek <gospo@broadcom.com> Signed-off-by:
Michael Chan <michael.chan@broadcom.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Michael Chan authored
New firmware interface requires the PTP sequence ID header offset to be passed to the firmware to properly find the matching timestamp for all protocols. Fixes: 83bb623c ("bnxt_en: Transmit and retrieve packet timestamps") Reviewed-by:
Edwin Peer <edwin.peer@broadcom.com> Signed-off-by:
Michael Chan <michael.chan@broadcom.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Michael Chan authored
The key change is the firmware call to retrieve the PTP TX timestamp. The header offset for the PTP sequence number field is now added. Signed-off-by:
Michael Chan <michael.chan@broadcom.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Kefeng Wang authored
DO_ONCE DEFINE_STATIC_KEY_TRUE(___once_key); __do_once_done once_disable_jump(once_key); INIT_WORK(&w->work, once_deferred); struct once_work *w; w->key = key; schedule_work(&w->work); module unload //*the key is destroy* process_one_work once_deferred BUG_ON(!static_key_enabled(work->key)); static_key_count((struct static_key *)x) //*access key, crash* When module uses DO_ONCE mechanism, it could crash due to the above concurrency problem, we could reproduce it with link[1]. Fix it by add/put module refcount in the once work process. [1] https://lore.kernel.org/netdev/eaa6c371-465e-57eb-6be9-f4b16b9d7cbf@huawei.com/ Cc: Hannes Frederic Sowa <hannes@stressinduktion.org> Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: David S. Miller <davem@davemloft.net> Cc: Eric Dumazet <edumazet@google.com> Reported-by:
Minmin chen <chenmingmin@huawei.com> Signed-off-by:
Kefeng Wang <wangkefeng.wang@huawei.com> Acked-by:
Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Vinicius Costa Gomes authored
Fixes possible leak of PTP virtual clocks. The number of PTP virtual clocks to be unregistered is passed as 'u32', but the function that unregister the devices handles that as 'u8'. Fixes: 73f37068 ("ptp: support ptp physical/virtual clocks conversion") Signed-off-by:
Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Ben Hutchings authored
Commit a5e63c7d "net: phy: micrel: Fix detection of ksz87xx switch" broke link detection on the external ports of the KSZ8795. The previously unused phy_driver structure for these devices specifies config_aneg and read_status functions that appear to be designed for a fixed link and do not work with the embedded PHYs in the KSZ8795. Delete the use of these functions in favour of the generic PHY implementations which were used previously. Fixes: a5e63c7d ("net: phy: micrel: Fix detection of ksz87xx switch") Signed-off-by:
Ben Hutchings <ben.hutchings@mind.be> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
- Aug 07, 2021
-
-
Loic Poulain authored
Lockdep detected possible interrupt unsafe locking scenario: CPU0 CPU1 ---- ---- lock(&mhiwwan->rx_lock); local_irq_disable(); lock(&mhi_cntrl->pm_lock); lock(&mhiwwan->rx_lock); <Interrupt> lock(&mhi_cntrl->pm_lock); *** DEADLOCK *** To prevent this we need to disable the soft-interrupts when taking the rx_lock. Cc: stable@vger.kernel.org Fixes: fa588eba ("net: Add Qcom WWAN control driver") Reported-by:
Thomas Perrot <thomas.perrot@bootlin.com> Signed-off-by:
Loic Poulain <loic.poulain@linaro.org> Reviewed-by:
Sergey Ryazanov <ryazanov.s.a@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Oleksij Rempel authored
Make sure that all external port are actually isolated from each other, so no packets are leaked. Fixes: ec6698c2 ("net: dsa: add support for Atheros AR9331 built-in switch") Signed-off-by:
Oleksij Rempel <o.rempel@pengutronix.de> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Hayes Wang says: ==================== r8169: adjust the setting for RTL8106e These patches are uesed to avoid the delay of link-up interrupt, when enabling ASPM for RTL8106e. The patch #1 is used to enable ASPM if it is possible. And the patch #2 is used to modify the entrance latencies of L0 and L1. ==================== Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Hayes Wang authored
The original L0 and L1 entrance latencies of RTL8106e are 4us. And they cause the delay of link-up interrupt when enabling ASPM. Change the L0 entrance latency to 7us and L1 entrance latency to 32us. Then, they could avoid the issue. Tested-by:
Koba Ko <koba.ko@canonical.com> Signed-off-by:
Hayes Wang <hayeswang@realtek.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Hayes Wang authored
This reverts commit 1ee8856d . This is used to re-enable ASPM on RTL8106e, if it is possible. Signed-off-by:
Hayes Wang <hayeswang@realtek.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpfDavid S. Miller authored
Daniel Borkmann says: ==================== pull-request: bpf 2021-08-07 The following pull-request contains BPF updates for your *net* tree. We've added 4 non-merge commits during the last 9 day(s) which contain a total of 4 files changed, 8 insertions(+), 7 deletions(-). The main changes are: 1) Fix integer overflow in htab's lookup + delete batch op, from Tatsuhiko Yasumatsu. 2) Fix invalid fd 0 close in libbpf if BTF parsing failed, from Daniel Xu. 3) Fix libbpf feature probe for BPF_PROG_TYPE_CGROUP_SOCKOPT, from Robin Gögge. 4) Fix minor libbpf doc warning regarding code-block language, from Randy Dunlap. ==================== Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Tatsuhiko Yasumatsu authored
In __htab_map_lookup_and_delete_batch(), hash buckets are iterated over to count the number of elements in each bucket (bucket_size). If bucket_size is large enough, the multiplication to calculate kvmalloc() size could overflow, resulting in out-of-bounds write as reported by KASAN: [...] [ 104.986052] BUG: KASAN: vmalloc-out-of-bounds in __htab_map_lookup_and_delete_batch+0x5ce/0xb60 [ 104.986489] Write of size 4194224 at addr ffffc9010503be70 by task crash/112 [ 104.986889] [ 104.987193] CPU: 0 PID: 112 Comm: crash Not tainted 5.14.0-rc4 #13 [ 104.987552] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.13.0-1ubuntu1.1 04/01/2014 [ 104.988104] Call Trace: [ 104.988410] dump_stack_lvl+0x34/0x44 [ 104.988706] print_address_description.constprop.0+0x21/0x140 [ 104.988991] ? __htab_map_lookup_and_delete_batch+0x5ce/0xb60 [ 104.989327] ? __htab_map_lookup_and_delete_batch+0x5ce/0xb60 [ 104.989622] kasan_report.cold+0x7f/0x11b [ 104.989881] ? __htab_map_lookup_and_delete_batch+0x5ce/0xb60 [ 104.990239] kasan_check_range+0x17c/0x1e0 [ 104.990467] memcpy+0x39/0x60 [ 104.990670] __htab_map_lookup_and_delete_batch+0x5ce/0xb60 [ 104.990982] ? __wake_up_common+0x4d/0x230 [ 104.991256] ? htab_of_map_free+0x130/0x130 [ 104.991541] bpf_map_do_batch+0x1fb/0x220 [...] In hashtable, if the elements' keys have the same jhash() value, the elements will be put into the same bucket. By putting a lot of elements into a single bucket, the value of bucket_size can be increased to trigger the integer overflow. Triggering the overflow is possible for both callers with CAP_SYS_ADMIN and callers without CAP_SYS_ADMIN. It will be trivial for a caller with CAP_SYS_ADMIN to intentionally reach this overflow by enabling BPF_F_ZERO_SEED. As this flag will set the random seed passed to jhash() to 0, it will be easy for the caller to prepare keys which will be hashed into the same value, and thus put all the elements into the same bucket. If the caller does not have CAP_SYS_ADMIN, BPF_F_ZERO_SEED cannot be used. However, it will be still technically possible to trigger the overflow, by guessing the random seed value passed to jhash() (32bit) and repeating the attempt to trigger the overflow. In this case, the probability to trigger the overflow will be low and will take a very long time. Fix the integer overflow by calling kvmalloc_array() instead of kvmalloc() to allocate memory. Fixes: 05799638 ("bpf: Add batch ops to all htab bpf map") Signed-off-by:
Tatsuhiko Yasumatsu <th.yasumatsu@gmail.com> Signed-off-by:
Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/20210806150419.109658-1-th.yasumatsu@gmail.com
-
Randy Dunlap authored
Use "code-block: none" instead of "c" for non-C-language code blocks. Removes these warnings: lnx-514-rc4/Documentation/bpf/libbpf/libbpf_naming_convention.rst:111: WARNING: Could not lex literal_block as "c". Highlighting skipped. lnx-514-rc4/Documentation/bpf/libbpf/libbpf_naming_convention.rst:124: WARNING: Could not lex literal_block as "c". Highlighting skipped. Fixes: f42cfb46 ("bpf: Add documentation for libbpf including API autogen") Signed-off-by:
Randy Dunlap <rdunlap@infradead.org> Signed-off-by:
Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/20210802015037.787-1-rdunlap@infradead.org
-
Daniel Xu authored
Before this patch, btf_new() was liable to close an arbitrary FD 0 if BTF parsing failed. This was because: * btf->fd was initialized to 0 through the calloc() * btf__free() (in the `done` label) closed any FDs >= 0 * btf->fd is left at 0 if parsing fails This issue was discovered on a system using libbpf v0.3 (without BTF_KIND_FLOAT support) but with a kernel that had BTF_KIND_FLOAT types in BTF. Thus, parsing fails. While this patch technically doesn't fix any issues b/c upstream libbpf has BTF_KIND_FLOAT support, it'll help prevent issues in the future if more BTF types are added. It also allow the fix to be backported to older libbpf's. Fixes: 3289959b ("libbpf: Support BTF loading and raw data output in both endianness") Signed-off-by:
Daniel Xu <dxu@dxuuu.xyz> Signed-off-by:
Andrii Nakryiko <andrii@kernel.org> Signed-off-by:
Daniel Borkmann <daniel@iogearbox.net> Acked-by:
Yonghong Song <yhs@fb.com> Link: https://lore.kernel.org/bpf/5969bb991adedb03c6ae93e051fd2a00d293cf25.1627513670.git.dxu@dxuuu.xyz
-
Robin Gögge authored
This patch fixes the probe for BPF_PROG_TYPE_CGROUP_SOCKOPT, so the probe reports accurate results when used by e.g. bpftool. Fixes: 4cdbfb59 ("libbpf: support sockopt hooks") Signed-off-by:
Robin Gögge <r.goegge@gmail.com> Signed-off-by:
Andrii Nakryiko <andrii@kernel.org> Signed-off-by:
Daniel Borkmann <daniel@iogearbox.net> Reviewed-by:
Quentin Monnet <quentin@isovalent.com> Link: https://lore.kernel.org/bpf/20210728225825.2357586-1-r.goegge@gmail.com
-
- Aug 06, 2021
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nfJakub Kicinski authored
Pablo Neira Ayuso says: ==================== Netfilter fixes for net The following patchset contains Netfilter fixes for net: 1) Restrict range element expansion in ipset to avoid soft lockup, from Jozsef Kadlecsik. 2) Memleak in error path for nf_conntrack_bridge for IPv4 packets, from Yajun Deng. 3) Simplify conntrack garbage collection strategy to avoid frequent wake-ups, from Florian Westphal. 4) Fix NFNLA_HOOK_FUNCTION_NAME string, do not include module name. 5) Missing chain family netlink attribute in chain description in nfnetlink_hook. 6) Incorrect sequence number on nfnetlink_hook dumps. 7) Use netlink request family in reply message for consistency. 8) Remove offload_pickup sysctl, use conntrack for established state instead, from Florian Westphal. 9) Translate NFPROTO_INET/ingress to NFPROTO_NETDEV/ingress, since NFPROTO_INET is not exposed through nfnetlink_hook. * git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nf: netfilter: nfnetlink_hook: translate inet ingress to netdev netfilter: conntrack: remove offload_pickup sysctl again netfilter: nfnetlink_hook: Use same family as request message netfilter: nfnetlink_hook: use the sequence number of the request message netfilter: nfnetlink_hook: missing chain family netfilter: nfnetlink_hook: strip off module name from hookfn netfilter: conntrack: collect all entries in one cycle netfilter: nf_conntrack_bridge: Fix memory leak when error netfilter: ipset: Limit the maximal range of consecutive elements to add/delete ==================== Link: https://lore.kernel.org/r/20210806151149.6356-1-pablo@netfilter.org Signed-off-by:
Jakub Kicinski <kuba@kernel.org>
-
Pablo Neira Ayuso authored
The NFPROTO_INET pseudofamily is not exposed through this new netlink interface. The netlink dump either shows NFPROTO_IPV4 or NFPROTO_IPV6 for NFPROTO_INET prerouting/input/forward/output/postrouting hooks. The NFNLA_CHAIN_FAMILY attribute provides the family chain, which specifies if this hook applies to inet traffic only (either IPv4 or IPv6). Translate the inet/ingress hook to netdev/ingress to fully hide the NFPROTO_INET implementation details. Fixes: e2cf17d3 ("netfilter: add new hook nfnl subsystem") Signed-off-by:
Pablo Neira Ayuso <pablo@netfilter.org>
-
Florian Westphal authored
These two sysctls were added because the hardcoded defaults (2 minutes, tcp, 30 seconds, udp) turned out to be too low for some setups. They appeared in 5.14-rc1 so it should be fine to remove it again. Marcelo convinced me that there should be no difference between a flow that was offloaded vs. a flow that was not wrt. timeout handling. Thus the default is changed to those for TCP established and UDP stream, 5 days and 120 seconds, respectively. Marcelo also suggested to account for the timeout value used for the offloading, this avoids increase beyond the value in the conntrack-sysctl and will also instantly expire the conntrack entry with altered sysctls. Example: nf_conntrack_udp_timeout_stream=60 nf_flowtable_udp_timeout=60 This will remove offloaded udp flows after one minute, rather than two. An earlier version of this patch also cleared the ASSURED bit to allow nf_conntrack to evict the entry via early_drop (i.e., table full). However, it looks like we can safely assume that connection timed out via HW is still in established state, so this isn't needed. Quoting Oz: [..] the hardware sends all packets with a set FIN flags to sw. [..] Connections that are aged in hardware are expected to be in the established state. In case it turns out that back-to-sw-path transition can occur for 'dodgy' connections too (e.g., one side disappeared while software-path would have been in RETRANS timeout), we can adjust this later. Cc: Oz Shlomo <ozsh@nvidia.com> Cc: Paul Blakey <paulb@nvidia.com> Suggested-by:
Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by:
Florian Westphal <fw@strlen.de> Reviewed-by:
Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Reviewed-by:
Oz Shlomo <ozsh@nvidia.com> Signed-off-by:
Pablo Neira Ayuso <pablo@netfilter.org>
-
Pablo Neira Ayuso authored
Use the same family as the request message, for consistency. The netlink payload provides sufficient information to describe the hook object, including the family. This makes it easier to userspace to correlate the hooks are that visited by the packets for a certain family. Fixes: e2cf17d3 ("netfilter: add new hook nfnl subsystem") Signed-off-by:
Pablo Neira Ayuso <pablo@netfilter.org>
-
Pablo Neira Ayuso authored
The sequence number allows to correlate the netlink reply message (as part of the dump) with the original request message. The cb->seq field is internally used to detect an interference (update) of the hook list during the netlink dump, do not use it as sequence number in the netlink dump header. Fixes: e2cf17d3 ("netfilter: add new hook nfnl subsystem") Signed-off-by:
Pablo Neira Ayuso <pablo@netfilter.org>
-
Pablo Neira Ayuso authored
The family is relevant for pseudo-families like NFPROTO_INET otherwise the user needs to rely on the hook function name to differentiate it from NFPROTO_IPV4 and NFPROTO_IPV6 names. Add nfnl_hook_chain_desc_attributes instead of using the existing NFTA_CHAIN_* attributes, since these do not provide a family number. Fixes: e2cf17d3 ("netfilter: add new hook nfnl subsystem") Signed-off-by:
Pablo Neira Ayuso <pablo@netfilter.org>
-
Pablo Neira Ayuso authored
NFNLA_HOOK_FUNCTION_NAME should include the hook function name only, the module name is already provided by NFNLA_HOOK_MODULE_NAME. Fixes: e2cf17d3 ("netfilter: add new hook nfnl subsystem") Signed-off-by:
Pablo Neira Ayuso <pablo@netfilter.org>
-
Florian Westphal authored
Michal Kubecek reports that conntrack gc is responsible for frequent wakeups (every 125ms) on idle systems. On busy systems, timed out entries are evicted during lookup. The gc worker is only needed to remove entries after system becomes idle after a busy period. To resolve this, always scan the entire table. If the scan is taking too long, reschedule so other work_structs can run and resume from next bucket. After a completed scan, wait for 2 minutes before the next cycle. Heuristics for faster re-schedule are removed. GC_SCAN_INTERVAL could be exposed as a sysctl in the future to allow tuning this as-needed or even turn the gc worker off. Reported-by:
Michal Kubecek <mkubecek@suse.cz> Signed-off-by:
Florian Westphal <fw@strlen.de> Signed-off-by:
Pablo Neira Ayuso <pablo@netfilter.org>
-
John Hubbard authored
On s390, the following build warning occurs: drivers/net/ethernet/marvell/mvpp2/mvpp2.h:844:2: warning: overflow in conversion from 'long unsigned int' to 'int' changes value from '18446744073709551584' to '-32' [-Woverflow] 844 | ((total_size) - MVPP2_SKB_HEADROOM - MVPP2_SKB_SHINFO_SIZE) This happens because MVPP2_SKB_SHINFO_SIZE, which is 320 bytes (which is already 64-byte aligned) on some architectures, actually gets ALIGN'd up to 512 bytes in the s390 case. So then, when this is invoked: MVPP2_RX_MAX_PKT_SIZE(MVPP2_BM_SHORT_FRAME_SIZE) ...that turns into: 704 - 224 - 512 == -32 ...which is not a good frame size to end up with! The warning above is a bit lucky: it notices a signed/unsigned bad behavior here, which leads to the real problem of a frame that is too short for its contents. Increase MVPP2_BM_SHORT_FRAME_SIZE by 32 (from 704 to 736), which is just exactly big enough. (The other values can't readily be changed without causing a lot of other problems.) Fixes: 07dd0a7a ("mvpp2: add basic XDP support") Cc: Sven Auhagen <sven.auhagen@voleatech.de> Cc: Matteo Croce <mcroce@microsoft.com> Cc: David S. Miller <davem@davemloft.net> Signed-off-by:
John Hubbard <jhubbard@nvidia.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
DENG Qingfang authored
Add the missing RxUnicast counter. Fixes: b8f126a8 ("net-next: dsa: add dsa support for Mediatek MT7530 switch") Signed-off-by:
DENG Qingfang <dqfext@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netLinus Torvalds authored
Pull networking fixes from Jakub Kicinski: "Including fixes from ipsec. Current release - regressions: - sched: taprio: fix init procedure to avoid inf loop when dumping - sctp: move the active_key update after sh_keys is added Current release - new code bugs: - sparx5: fix build with old GCC & bitmask on 32-bit targets Previous releases - regressions: - xfrm: redo the PREEMPT_RT RCU vs hash_resize_mutex deadlock fix - xfrm: fixes for the compat netlink attribute translator - phy: micrel: Fix detection of ksz87xx switch Previous releases - always broken: - gro: set inner transport header offset in tcp/udp GRO hook to avoid crashes when such packets reach GSO - vsock: handle VIRTIO_VSOCK_OP_CREDIT_REQUEST, as required by spec - dsa: sja1105: fix static FDB entries on SJA1105P/Q/R/S and SJA1110 - bridge: validate the NUD_PERMANENT bit when adding an extern_learn FDB entry - usb: lan78xx: don't modify phy_device state concurrently - usb: pegasus: check for errors of IO routines" * tag 'net-5.14-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (48 commits) net: vxge: fix use-after-free in vxge_device_unregister net: fec: fix use-after-free in fec_drv_remove net: pegasus: fix uninit-value in get_interrupt_interval net: ethernet: ti: am65-cpsw: fix crash in am65_cpsw_port_offload_fwd_mark_update() bnx2x: fix an error code in bnx2x_nic_load() net: wwan: iosm: fix recursive lock acquire in unregister net: wwan: iosm: correct data protocol mask bit net: wwan: iosm: endianness type correction net: wwan: iosm: fix lkp buildbot warning net: usb: lan78xx: don't modify phy_device state concurrently docs: networking: netdevsim rules net: usb: pegasus: Remove the changelog and DRIVER_VERSION. net: usb: pegasus: Check the return value of get_geristers() and friends; net/prestera: Fix devlink groups leakage in error flow net: sched: fix lockdep_set_class() typo error for sch->seqlock net: dsa: qca: ar9331: reorder MDIO write sequence VSOCK: handle VIRTIO_VSOCK_OP_CREDIT_REQUEST mptcp: drop unused rcu member in mptcp_pm_addr_entry net: ipv6: fix returned variable type in ip6_skb_dst_mtu nfp: update ethtool reporting of pauseframe control ...
-
Tetsuo Handa authored
syzbot is hitting might_sleep() warning at hci_sock_dev_event() due to calling lock_sock() with rw spinlock held [1]. It seems that history of this locking problem is a trial and error. Commit b40df574 ("[PATCH] bluetooth: fix socket locking in hci_sock_dev_event()") in 2.6.21-rc4 changed bh_lock_sock() to lock_sock() as an attempt to fix lockdep warning. Then, commit 4ce61d1c ("[BLUETOOTH]: Fix locking in hci_sock_dev_event().") in 2.6.22-rc2 changed lock_sock() to local_bh_disable() + bh_lock_sock_nested() as an attempt to fix the sleep in atomic context warning. Then, commit 4b5dd696 ("Bluetooth: Remove local_bh_disable() from hci_sock.c") in 3.3-rc1 removed local_bh_disable(). Then, commit e305509e ("Bluetooth: use correct lock to prevent UAF of hdev object") in 5.13-rc5 again changed bh_lock_sock_nested() to lock_sock() as an attempt to fix CVE-2021-3573. This difficulty comes from current implementation that hci_sock_dev_event(HCI_DEV_UNREG) is responsible for dropping all references from sockets because hci_unregister_dev() immediately reclaims resources as soon as returning from hci_sock_dev_event(HCI_DEV_UNREG). But the history suggests that hci_sock_dev_event(HCI_DEV_UNREG) was not doing what it should do. Therefore, instead of trying to detach sockets from device, let's accept not detaching sockets from device at hci_sock_dev_event(HCI_DEV_UNREG), by moving actual cleanup of resources from hci_unregister_dev() to hci_cleanup_dev() which is called by bt_host_release() when all references to this unregistered device (which is a kobject) are gone. Since hci_sock_dev_event(HCI_DEV_UNREG) no longer resets hci_pi(sk)->hdev, we need to check whether this device was unregistered and return an error based on HCI_UNREGISTER flag. There might be subtle behavioral difference in "monitor the hdev" functionality; please report if you found something went wrong due to this patch. Link: https://syzkaller.appspot.com/bug?extid=a5df189917e79d5e59c9 [1] Reported-by:
syzbot <syzbot+a5df189917e79d5e59c9@syzkaller.appspotmail.com> Suggested-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Fixes: e305509e ("Bluetooth: use correct lock to prevent UAF of hdev object") Acked-by:
Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinuxLinus Torvalds authored
Pull selinux fix from Paul Moore: "One small SELinux fix for a problem where an error code was not being propagated back up to userspace when a bogus SELinux policy is loaded into the kernel" * tag 'selinux-pr-20210805' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux: selinux: correct the return value when loads initial sids
-
git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespaceLinus Torvalds authored
Pull ucounts fix from Eric Biederman: "Fix a subtle locking versus reference counting bug in the ucount changes, found by syzbot" * 'for-v5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace: ucounts: Fix race condition between alloc_ucounts and put_ucounts
-
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-traceLinus Torvalds authored
Pull tracing fixes from Steven Rostedt: "Various tracing fixes: - Fix NULL pointer dereference caused by an error path - Give histogram calculation fields a size, otherwise it breaks synthetic creation based on them. - Reject strings being used for number calculations. - Fix recordmcount.pl warning on llvm building RISC-V allmodconfig - Fix the draw_functrace.py script to handle the new trace output - Fix warning of smp_processor_id() in preemptible code" * tag 'trace-v5.14-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: tracing: Quiet smp_processor_id() use in preemptable warning in hwlat scripts/tracing: fix the bug that can't parse raw_trace_func scripts/recordmcount.pl: Remove check_objcopy() and $can_use_local tracing: Reject string operand in the histogram expression tracing / histogram: Give calculation hist_fields a size tracing: Fix NULL pointer dereference in start_creating
-
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linuxLinus Torvalds authored
Pull s390 fixes from Heiko Carstens: - fix zstd build for -march=z900 (undefined reference to __clzdi2) - add missing .got.plts to vdso linker scripts to fix kpatch build errors - update defconfigs * tag 's390-5.14-4' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: s390: update defconfigs s390/boot: fix zstd build for -march=z900 s390/vdso: add .got.plt in vdso linker script
-
git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds authored
Pull kvm fixes from Paolo Bonzini: "Mostly bugfixes; plus, support for XMM arguments to Hyper-V hypercalls now obeys KVM_CAP_HYPERV_ENFORCE_CPUID. Both the XMM arguments feature and KVM_CAP_HYPERV_ENFORCE_CPUID are new in 5.14, and each did not know of the other" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: KVM: x86/mmu: Fix per-cpu counter corruption on 32-bit builds KVM: selftests: fix hyperv_clock test KVM: SVM: improve the code readability for ASID management KVM: SVM: Fix off-by-one indexing when nullifying last used SEV VMCB KVM: Do not leak memory for duplicate debugfs directories KVM: selftests: Test access to XMM fast hypercalls KVM: x86: hyper-v: Check if guest is allowed to use XMM registers for hypercall input KVM: x86: Introduce trace_kvm_hv_hypercall_done() KVM: x86: hyper-v: Check access to hypercall before reading XMM registers KVM: x86: accept userspace interrupt only if no event is injected
-
git://git.kernel.org/pub/scm/linux/kernel/git/brodo/linuxLinus Torvalds authored
Pull pcmcia fix from Dominik Brodowski: "Zheyu Ma found and fixed a null pointer dereference bug in the device driver for the i82092 card reader" * 'pcmcia-next' of git://git.kernel.org/pub/scm/linux/kernel/git/brodo/linux: pcmcia: i82092: fix a null pointer dereference bug
-
Alex Xu (Hello71) authored
This program always prints 4096 and hangs before the patch, and always prints 8192 and exits successfully after: int main() { int pipefd[2]; for (int i = 0; i < 1025; i++) if (pipe(pipefd) == -1) return 1; size_t bufsz = fcntl(pipefd[1], F_GETPIPE_SZ); printf("%zd\n", bufsz); char *buf = calloc(bufsz, 1); write(pipefd[1], buf, bufsz); read(pipefd[0], buf, bufsz-1); write(pipefd[1], buf, 1); } Note that you may need to increase your RLIMIT_NOFILE before running the program. Fixes: 759c0114 ("pipe: limit the per-user amount of pages allocated in pipes") Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/lkml/1628086770.5rn8p04n6j.none@localhost/ Link: https://lore.kernel.org/lkml/1628127094.lxxn016tj7.none@localhost/ Signed-off-by:
Alex Xu (Hello71) <alex_y_xu@yahoo.ca> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
- Aug 05, 2021
-
-
Jakub Kicinski authored
Pavel Skripkin says: ==================== net: fix use-after-free bugs I've added new checker to smatch yesterday. It warns about using netdev_priv() pointer after free_{netdev,candev}() call. I hope, it will get into next smatch release. Some of the reported bugs are fixed and upstreamed already, but Dan ran new smatch with allmodconfig and found 2 more. Big thanks to Dan for doing it, because I totally forgot to do it. ==================== Link: https://lore.kernel.org/r/cover.1628091954.git.paskripkin@gmail.com Signed-off-by:
Jakub Kicinski <kuba@kernel.org>
-