- May 20, 2020
-
-
Jason Gerecke authored
commit 778fbf41 upstream. We've recently switched from extracting the value of HID_DG_CONTACTMAX at a fixed offset (which may not be correct for all tablets) to injecting the report into the driver for the generic codepath to handle. Unfortunately, this change was made for *all* tablets, even those which aren't generic. Because `wacom_wac_report` ignores reports from non- generic devices, the contact count never gets initialized. Ultimately this results in the touch device itself failing to probe, and thus the loss of touch input. This commit adds back the fixed-offset extraction for non-generic devices. Link: https://github.com/linuxwacom/input-wacom/issues/155 Fixes: 184eccd4 ("HID: wacom: generic: read HID_DG_CONTACTMAX from any feature report") Signed-off-by:
Jason Gerecke <jason.gerecke@wacom.com> Reviewed-by:
Aaron Armstrong Skomra <aaron.skomra@wacom.com> CC: stable@vger.kernel.org # 5.3+ Signed-off-by:
Benjamin Tissoires <benjamin.tissoires@redhat.com> Cc: Guenter Roeck <linux@roeck-us.net> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Sabrina Dubroca authored
commit afe49de4 upstream. Commit 15e66807 ("ipv6: reorder icmpv6_init() and ip6_mr_init()") moved the cleanup label for ipmr_fail, but should have changed the contents of the cleanup labels as well. Now we can end up cleaning up icmpv6 even though it hasn't been initialized (jump to icmp_fail or ipmr_fail). Simply undo things in the reverse order of their initialization. Example of panic (triggered by faking a failure of icmpv6_init): kasan: GPF could be caused by NULL-ptr deref or user memory access general protection fault: 0000 [#1] PREEMPT SMP KASAN PTI [...] RIP: 0010:__list_del_entry_valid+0x79/0x160 [...] Call Trace: ? lock_release+0x8a0/0x8a0 unregister_pernet_operations+0xd4/0x560 ? ops_free_list+0x480/0x480 ? down_write+0x91/0x130 ? unregister_pernet_subsys+0x15/0x30 ? down_read+0x1b0/0x1b0 ? up_read+0x110/0x110 ? kmem_cache_create_usercopy+0x1b4/0x240 unregister_pernet_subsys+0x1d/0x30 icmpv6_cleanup+0x1d/0x30 inet6_init+0x1b5/0x23f Fixes: 15e66807 ("ipv6: reorder icmpv6_init() and ip6_mr_init()") Signed-off-by:
Sabrina Dubroca <sd@queasysnail.net> Signed-off-by:
David S. Miller <davem@davemloft.net> Cc: Guenter Roeck <linux@roeck-us.net> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Willem de Bruijn authored
[ Upstream commit 9274124f ] Syzkaller again found a path to a kernel crash through bad gso input: a packet with transport header extending beyond skb_headlen(skb). Tighten validation at kernel entry: - Verify that the transport header lies within the linear section. To avoid pulling linux/tcp.h, verify just sizeof tcphdr. tcp_gso_segment will call pskb_may_pull (th->doff * 4) before use. - Match the gso_type against the ip_proto found by the flow dissector. Fixes: bfd5f4a3 ("packet: Add GSO/csum offload support.") Reported-by:
syzbot <syzkaller@googlegroups.com> Signed-off-by:
Willem de Bruijn <willemb@google.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Michael Chan authored
[ Upstream commit c71c4e49 ] Fix the logic that sets the enable/disable flag for the source MAC filter according to firmware spec 1.7.1. In the original firmware spec. before 1.7.1, the VF spoof check flags were not latched after making the HWRM_FUNC_CFG call, so there was a need to keep the func_flags so that subsequent calls would perserve the VF spoof check setting. A change was made in the 1.7.1 spec so that the flags became latched. So we now set or clear the anti- spoof setting directly without retrieving the old settings in the stored vf->func_flags which are no longer valid. We also remove the unneeded vf->func_flags. Fixes: 8eb992e8 ("bnxt_en: Update firmware interface spec to 1.7.6.2.") Signed-off-by:
Michael Chan <michael.chan@broadcom.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Michael Chan authored
[ Upstream commit bae361c5 ] Improve the slot reset sequence by disabling the device to prevent bad DMAs if slot reset fails. Return the proper result instead of always PCI_ERS_RESULT_RECOVERED to the caller. Fixes: 6316ea6d ("bnxt_en: Enable AER support.") Signed-off-by:
Michael Chan <michael.chan@broadcom.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Moshe Shemesh authored
[ Upstream commit cece6f43 ] Processing commands by cmd_work_handler() while already in Internal Error State will result in entry leak, since the handler process force completion without doorbell. Forced completion doesn't release the entry and event completion will never arrive, so entry should be released. Fixes: 73dd3a48 ("net/mlx5: Avoid using pending command interface slots") Signed-off-by:
Moshe Shemesh <moshe@mellanox.com> Signed-off-by:
Eran Ben Elisha <eranbe@mellanox.com> Signed-off-by:
Saeed Mahameed <saeedm@mellanox.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Moshe Shemesh authored
[ Upstream commit f3cb3ceb ] mlx5_cmd_flush() will trigger forced completions to all valid command entries. Triggered by an asynch event such as fast teardown it can happen at any stage of the command, including command initialization. It will trigger forced completion and that can lead to completion on an uninitialized command entry. Setting MLX5_CMD_ENT_STATE_PENDING_COMP only after command entry is initialized will ensure force completion is treated only if command entry is initialized. Fixes: 73dd3a48 ("net/mlx5: Avoid using pending command interface slots") Signed-off-by:
Moshe Shemesh <moshe@mellanox.com> Signed-off-by:
Eran Ben Elisha <eranbe@mellanox.com> Signed-off-by:
Saeed Mahameed <saeedm@mellanox.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Michael Chan authored
[ Upstream commit c72cb303 ] The current logic in bnxt_fix_features() will inadvertently turn on both CTAG and STAG VLAN offload if the user tries to disable both. Fix it by checking that the user is trying to enable CTAG or STAG before enabling both. The logic is supposed to enable or disable both CTAG and STAG together. Fixes: 5a9f6b23 ("bnxt_en: Enable and disable RX CTAG and RX STAG VLAN acceleration together.") Signed-off-by:
Michael Chan <michael.chan@broadcom.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Eric Dumazet authored
[ Upstream commit df4953e4 ] syzbot managed to set up sfq so that q->scaled_quantum was zero, triggering an infinite loop in sfq_dequeue() More generally, we must only accept quantum between 1 and 2^18 - 7, meaning scaled_quantum must be in [1, 0x7FFF] range. Otherwise, we also could have a loop in sfq_dequeue() if scaled_quantum happens to be 0x8000, since slot->allot could indefinitely switch between 0 and 0x8000. Fixes: eeaeb068 ("sch_sfq: allow big packets and be fair") Signed-off-by:
Eric Dumazet <edumazet@google.com> Reported-by:
<syzbot+0251e883fe39e7a0cb0a@syzkaller.appspotmail.com> Cc: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Eric Dumazet authored
[ Upstream commit 8738c85c ] If choke_init() could not allocate q->tab, we would crash later in choke_reset(). BUG: KASAN: null-ptr-deref in memset include/linux/string.h:366 [inline] BUG: KASAN: null-ptr-deref in choke_reset+0x208/0x340 net/sched/sch_choke.c:326 Write of size 8 at addr 0000000000000000 by task syz-executor822/7022 CPU: 1 PID: 7022 Comm: syz-executor822 Not tainted 5.7.0-rc1-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x188/0x20d lib/dump_stack.c:118 __kasan_report.cold+0x5/0x4d mm/kasan/report.c:515 kasan_report+0x33/0x50 mm/kasan/common.c:625 check_memory_region_inline mm/kasan/generic.c:187 [inline] check_memory_region+0x141/0x190 mm/kasan/generic.c:193 memset+0x20/0x40 mm/kasan/common.c:85 memset include/linux/string.h:366 [inline] choke_reset+0x208/0x340 net/sched/sch_choke.c:326 qdisc_reset+0x6b/0x520 net/sched/sch_generic.c:910 dev_deactivate_queue.constprop.0+0x13c/0x240 net/sched/sch_generic.c:1138 netdev_for_each_tx_queue include/linux/netdevice.h:2197 [inline] dev_deactivate_many+0xe2/0xba0 net/sched/sch_generic.c:1195 dev_deactivate+0xf8/0x1c0 net/sched/sch_generic.c:1233 qdisc_graft+0xd25/0x1120 net/sched/sch_api.c:1051 tc_modify_qdisc+0xbab/0x1a00 net/sched/sch_api.c:1670 rtnetlink_rcv_msg+0x44e/0xad0 net/core/rtnetlink.c:5454 netlink_rcv_skb+0x15a/0x410 net/netlink/af_netlink.c:2469 netlink_unicast_kernel net/netlink/af_netlink.c:1303 [inline] netlink_unicast+0x537/0x740 net/netlink/af_netlink.c:1329 netlink_sendmsg+0x882/0xe10 net/netlink/af_netlink.c:1918 sock_sendmsg_nosec net/socket.c:652 [inline] sock_sendmsg+0xcf/0x120 net/socket.c:672 ____sys_sendmsg+0x6bf/0x7e0 net/socket.c:2362 ___sys_sendmsg+0x100/0x170 net/socket.c:2416 __sys_sendmsg+0xec/0x1b0 net/socket.c:2449 do_syscall_64+0xf6/0x7d0 arch/x86/entry/common.c:295 Fixes: 77e62da6 ("sch_choke: drop all packets in queue during reset") Signed-off-by:
Eric Dumazet <edumazet@google.com> Reported-by:
syzbot <syzkaller@googlegroups.com> Cc: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Matt Jolly authored
[ Upstream commit 57c7f2bd ] Add support for Dell Wireless 5816e to drivers/net/usb/qmi_wwan.c Signed-off-by:
Matt Jolly <Kangie@footclan.ninja> Acked-by:
Bjørn Mork <bjorn@mork.no> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Tariq Toukan authored
[ Upstream commit 40e47307 ] When ENOSPC is set the idx is still valid and gets set to the global MLX4_SINK_COUNTER_INDEX. However gcc's static analysis cannot tell that ENOSPC is impossible from mlx4_cmd_imm() and gives this warning: drivers/net/ethernet/mellanox/mlx4/main.c:2552:28: warning: 'idx' may be used uninitialized in this function [-Wmaybe-uninitialized] 2552 | priv->def_counter[port] = idx; Also, when ENOSPC is returned mlx4_allocate_default_counters should not fail. Fixes: 6de5f7f6 ("net/mlx4_core: Allocate default counter per port") Signed-off-by:
Jason Gunthorpe <jgg@mellanox.com> Signed-off-by:
Tariq Toukan <tariqt@mellanox.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Scott Dial authored
[ Upstream commit ab046a5d ] MACsec decryption always occurs in a softirq context. Since the FPU may not be usable in the softirq context, the call to decrypt may be scheduled on the cryptd work queue. The cryptd work queue does not provide ordering guarantees. Therefore, preserving order requires masking out ASYNC implementations of gcm(aes). For instance, an Intel CPU with AES-NI makes available the generic-gcm-aesni driver from the aesni_intel module to implement gcm(aes). However, this implementation requires the FPU, so it is not always available to use from a softirq context, and will fallback to the cryptd work queue, which does not preserve frame ordering. With this change, such a system would select gcm_base(ctr(aes-aesni),ghash-generic). While the aes-aesni implementation prefers to use the FPU, it will fallback to the aes-asm implementation if unavailable. By using a synchronous version of gcm(aes), the decryption will complete before returning from crypto_aead_decrypt(). Therefore, the macsec_decrypt_done() callback will be called before returning from macsec_decrypt(). Thus, the order of calls to macsec_post_decrypt() for the frames is preserved. While it's presumable that the pure AES-NI version of gcm(aes) is more performant, the hybrid solution is capable of gigabit speeds on modest hardware. Regardless, preserving the order of frames is paramount for many network protocols (e.g., triggering TCP retries). Within the MACsec driver itself, the replay protection is tripped by the out-of-order frames, and can cause frames to be dropped. This bug has been present in this code since it was added in v4.6, however it may not have been noticed since not all CPUs have FPU offload available. Additionally, the bug manifests as occasional out-of-order packets that are easily misattributed to other network phenomena. When this code was added in v4.6, the crypto/gcm.c code did not restrict selection of the ghash function based on the ASYNC flag. For instance, x86 CPUs with PCLMULQDQ would select the ghash-clmulni driver instead of ghash-generic, which submits to the cryptd work queue if the FPU is busy. However, this bug was was corrected in v4.8 by commit b30bdfa8 , and was backported all the way back to the v3.14 stable branch, so this patch should be applicable back to the v4.6 stable branch. Signed-off-by:
Scott Dial <scott@scottdial.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Eric Dumazet authored
[ Upstream commit 14695212 ] My intent was to not let users set a zero drop_batch_size, it seems I once again messed with min()/max(). Fixes: 9d18562a ("fq_codel: add batch ability to fq_codel_drop()") Signed-off-by:
Eric Dumazet <edumazet@google.com> Acked-by:
Toke Høiland-Jørgensen <toke@redhat.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Julia Lawall authored
[ Upstream commit 86530837 ] In this code, it appears that phyter_clocks is a list head, based on the previous list_for_each, and that clock->list is intended to be a list element, given that it has just been initialized in dp83640_clock_init. Accordingly, switch the arguments to list_add_tail, which takes the list head as the second argument. Fixes: cb646e2b ("ptp: Added a clock driver for the National Semiconductor PHYTER.") Signed-off-by:
Julia Lawall <Julia.Lawall@inria.fr> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Matt Jolly authored
commit 78d6de3c upstream. Add support for Dell Wireless 5816e to drivers/usb/serial/qcserial.c Signed-off-by:
Matt Jolly <Kangie@footclan.ninja> Cc: stable <stable@vger.kernel.org> Signed-off-by:
Johan Hovold <johan@kernel.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
- May 10, 2020
-
-
Greg Kroah-Hartman authored
-
Jiri Slaby authored
commit 526f3d96 upstream. Commit 018d26fc ("cgroup, netclassid: periodically release file_lock on classid") added a second cond_resched to write_classid indirectly by update_classid_task. Remove the one in write_classid. Signed-off-by:
Jiri Slaby <jslaby@suse.cz> Cc: Dmitry Yakunin <zeil@yandex-team.ru> Cc: Konstantin Khlebnikov <khlebnikov@yandex-team.ru> Cc: David S. Miller <davem@davemloft.net> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Thomas Pedersen authored
commit 30b2f0be upstream. commit 08a5bdde ("mac80211: consider QoS Null frames for STA_NULLFUNC_ACKED") Fixed a bug where we failed to take into account a nullfunc frame can be either non-QoS or QoS. It turns out there is at least one more bug in ieee80211_sta_tx_notify(), introduced in commit 7b6ddeaf ("mac80211: use QoS NDP for AP probing"), where we forgot to check for the QoS variant and so assumed the QoS nullfunc frame never went out Fix this by adding a helper ieee80211_is_any_nullfunc() which consolidates the check for non-QoS and QoS nullfunc frames. Replace existing compound conditionals and add a couple more missing checks for QoS variant. Signed-off-by:
Thomas Pedersen <thomas@adapt-ip.com> Link: https://lore.kernel.org/r/20200114055940.18502-3-thomas@adapt-ip.com Signed-off-by:
Johannes Berg <johannes.berg@intel.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Takashi Iwai authored
commit 977dfef4 upstream. The commit 3c6fd1f0 ("ALSA: hda: Add driver blacklist") added a new blacklist for the devices that are known to have empty codecs, and one of the entries was ASUS ROG Zenith II (PCI SSID 1043:874f). However, it turned out that the very same PCI SSID is used for the previous model that does have the valid HD-audio codecs and the change broke the sound on it. Since the empty codec problem appear on the certain AMD platform (PCI ID 1022:1487), this patch changes the blacklist matching to both PCI ID and SSID using pci_match_id(). Also, the entry that was removed by the previous fix for ASUS ROG Zenigh II is re-added. Link: https://lore.kernel.org/r/20200424061222.19792-1-tiwai@suse.de Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Steven Rostedt (VMware) authored
commit 12ecef0c upstream. In order to make future changes where we need to call tracing_set_clock() from within an event command, the order of trace_types_lock and event_mutex must be reversed, as the event command will hold event_mutex and the trace_types_lock is taken from within tracing_set_clock(). Link: http://lkml.kernel.org/r/20170921162249.0dde3dca@gandalf.local.home Requested-by:
Tom Zanussi <tom.zanussi@linux.intel.com> Signed-off-by:
Steven Rostedt (VMware) <rostedt@goodmis.org> Cc: Andress Kuo (郭孟修) <Andress.Kuo@mediatek.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Jere Leppänen authored
commit 12dfd78e upstream. When starting shutdown in sctp_sf_do_dupcook_a(), get the value for SHUTDOWN Cumulative TSN Ack from the new association, which is reconstructed from the cookie, instead of the old association, which the peer doesn't have anymore. Otherwise the SHUTDOWN is either ignored or replied to with an ABORT by the peer because CTSN Ack doesn't match the peer's Initial TSN. Fixes: bdf6fa52 ("sctp: handle association restarts when the socket is closed.") Signed-off-by:
Jere Leppänen <jere.leppanen@nokia.com> Acked-by:
Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Doug Berger authored
[ Upstream commit 3554e54a ] The driver is designed to drop Rx packets and reclaim the buffers when an allocation fails, and the network interface needs to safely handle this packet loss. Therefore, an allocation failure of Rx SKBs is relatively benign. However, the output of the warning message occurs with a high scheduling priority that can cause excessive jitter/latency for other high priority processing. This commit suppresses the warning messages to prevent scheduling problems while retaining the failure count in the statistics of the network interface. Signed-off-by:
Doug Berger <opendmb@gmail.com> Acked-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Doug Berger authored
[ Upstream commit ecaeceb8 ] The driver is designed to drop Rx packets and reclaim the buffers when an allocation fails, and the network interface needs to safely handle this packet loss. Therefore, an allocation failure of Rx SKBs is relatively benign. However, the output of the warning message occurs with a high scheduling priority that can cause excessive jitter/latency for other high priority processing. This commit suppresses the warning messages to prevent scheduling problems while retaining the failure count in the statistics of the network interface. Signed-off-by:
Doug Berger <opendmb@gmail.com> Acked-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Nathan Chancellor authored
[ Upstream commit 5990cdee ] 0day reports over and over on an powerpc randconfig with clang: lib/mpi/generic_mpih-mul1.c:37:13: error: invalid use of a cast in a inline asm context requiring an l-value: remove the cast or build with -fheinous-gnu-extensions Remove the superfluous casts, which have been done previously for x86 and arm32 in commit dea632ca ("lib/mpi: fix build with clang") and commit 7b7c1df2 ("lib/mpi/longlong.h: fix building with 32-bit x86"). Reported-by:
kbuild test robot <lkp@intel.com> Signed-off-by:
Nathan Chancellor <natechancellor@gmail.com> Acked-by:
Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au> Link: https://github.com/ClangBuiltLinux/linux/issues/991 Link: https://lore.kernel.org/r/20200413195041.24064-1-natechancellor@gmail.com Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Florian Fainelli authored
[ Upstream commit 6344dbde ] When asking the ARL to read a MAC address, we will get a number of bins returned in a single read. Out of those bins, there can essentially be 3 states: - all bins are full, we have no space left, and we can either replace an existing address or return that full condition - the MAC address was found, then we need to return its bin index and modify that one, and only that one - the MAC address was not found and we have a least one bin free, we use that bin index location then The code would unfortunately fail on all counts. Fixes: 1da6df85 ("net: dsa: b53: Implement ARL add/del/dump operations") Signed-off-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Jeremie Francois (on alpha) authored
[ Upstream commit e461bc9f ] Sed broke on some strings as it used colon as a separator. I made it more robust by using \001, which is legit POSIX AFAIK. E.g. ./config --set-str CONFIG_USBNET_DEVADDR "de:ad:be:ef:00:01" failed with: sed: -e expression #1, char 55: unknown option to `s' Signed-off-by:
Jeremie Francois (on alpha) <jeremie.francois@gmail.com> Signed-off-by:
Masahiro Yamada <masahiroy@kernel.org> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Philipp Rudo authored
[ Upstream commit 8ebf6da9 ] Switching tracers include instruction patching. To prevent that a instruction is patched while it's read the instruction patching is done in stop_machine 'context'. This also means that any function called during stop_machine must not be traced. Thus add 'notrace' to all functions called within stop_machine. Fixes: 1ec2772e ("s390/diag: add a statistic for diagnose calls") Fixes: 38f2c691 ("s390: improve wait logic of stop_machine") Fixes: 4ecf0a43 ("processor: get rid of cpu_relax_yield") Signed-off-by:
Philipp Rudo <prudo@linux.ibm.com> Signed-off-by:
Vasily Gorbik <gor@linux.ibm.com> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Ronnie Sahlberg authored
[ Upstream commit fada37f6 ] We use a spinlock while we are reading and accessing the destination address for a server. We need to also use this spinlock to protect when we are modifying this address from reconn_set_ipaddr(). Signed-off-by:
Ronnie Sahlberg <lsahlber@redhat.com> Reviewed-by:
Jeff Layton <jlayton@kernel.org> Signed-off-by:
Steve French <stfrench@microsoft.com> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Julien Beraud authored
[ Upstream commit 91a2559c ] In fine adjustement mode, which is the current default, the sub-second increment register is the number of nanoseconds that will be added to the clock when the accumulator overflows. At each clock cycle, the value of the addend register is added to the accumulator. Currently, we use 20ns = 1e09ns / 50MHz as this value whatever the frequency of the ptp clock actually is. The adjustment is then done on the addend register, only incrementing every X clock cycles X being the ratio between 50MHz and ptp_clock_rate (addend = 2^32 * 50MHz/ptp_clock_rate). This causes the following issues : - In case the frequency of the ptp clock is inferior or equal to 50MHz, the addend value calculation will overflow and the default addend value will be set to 0, causing the clock to not work at all. (For instance, for ptp_clock_rate = 50MHz, addend = 2^32). - The resolution of the timestamping clock is limited to 20ns while it is not needed, thus limiting the accuracy of the timestamping to 20ns. Fix this by setting sub-second increment to 2e09ns / ptp_clock_rate. It will allow to reach the minimum possible frequency for ptp_clk_ref, which is 5MHz for GMII 1000Mps Full-Duplex by setting the sub-second-increment to a higher value. For instance, for 25MHz, it gives ssinc = 80ns and default_addend = 2^31. It will also allow to use a lower value for sub-second-increment, thus improving the timestamping accuracy with frequencies higher than 100MHz, for instance, for 200MHz, ssinc = 10ns and default_addend = 2^31. v1->v2: - Remove modifications to the calculation of default addend, which broke compatibility with clock frequencies for which 2000000000 / ptp_clk_freq is not an integer. - Modify description according to discussions. Signed-off-by:
Julien Beraud <julien.beraud@orolia.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Julien Beraud authored
[ Upstream commit 15ce3060 ] There are 2 registers to write to enable a ptp ref clock coming from the fpga. One that enables the usage of the clock from the fpga for emac0 and emac1 as a ptp ref clock, and the other to allow signals from the fpga to reach emac0 and emac1. Currently, if the dwmac-socfpga has phymode set to PHY_INTERFACE_MODE_MII, PHY_INTERFACE_MODE_GMII, or PHY_INTERFACE_MODE_SGMII, both registers will be written and the ptp ref clock will be set as coming from the fpga. Separate the 2 register writes to only enable signals from the fpga to reach emac0 or emac1 when ptp ref clock is not coming from the fpga. Signed-off-by:
Julien Beraud <julien.beraud@orolia.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Xiyu Yang authored
[ Upstream commit 7717cbec ] i2400mu_bus_bm_wait_for_ack() invokes usb_get_urb(), which increases the refcount of the "notif_urb". When i2400mu_bus_bm_wait_for_ack() returns, local variable "notif_urb" becomes invalid, so the refcount should be decreased to keep refcount balanced. The issue happens in all paths of i2400mu_bus_bm_wait_for_ack(), which forget to decrease the refcnt increased by usb_get_urb(), causing a refcnt leak. Fix this issue by calling usb_put_urb() before the i2400mu_bus_bm_wait_for_ack() returns. Signed-off-by:
Xiyu Yang <xiyuyang19@fudan.edu.cn> Signed-off-by:
Xin Tan <tanxin.ctf@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Amadeusz Sławiński authored
[ Upstream commit 326b5092 ] If we don't find any pcm, pcm will point at address at an offset from the the list head and not a meaningful structure. Fix this by returning correct pcm if found and NULL if not. Found with coccinelle. Signed-off-by:
Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com> Link: https://lore.kernel.org/r/20200415162849.308-1-amadeuszx.slawinski@linux.intel.com Signed-off-by:
Mark Brown <broonie@kernel.org> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Matthias Blankertz authored
[ Upstream commit b94e1647 ] The HDMI?_SEL register maps up to four stereo SSI data lanes onto the sdata[0..3] inputs of the HDMI output block. The upper half of the register contains four blocks of 4 bits, with the most significant controlling the sdata3 line and the least significant the sdata0 line. The shift calculation has an off-by-one error, causing the parent SSI to be mapped to sdata3, the first multi-SSI child to sdata0 and so forth. As the parent SSI transmits the stereo L/R channels, and the HDMI core expects it on the sdata0 line, this causes no audio to be output when playing stereo audio on a multichannel capable HDMI out, and multichannel audio has permutated channels. Fix the shift calculation to map the parent SSI to sdata0, the first child to sdata1 etc. Signed-off-by:
Matthias Blankertz <matthias.blankertz@cetitec.com> Acked-by:
Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Link: https://lore.kernel.org/r/20200415141017.384017-3-matthias.blankertz@cetitec.com Signed-off-by:
Mark Brown <broonie@kernel.org> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Sebastian Reichel authored
[ Upstream commit aa781273 ] As mentioned slightly out of patch context in the code, there is no reset routine for the chip. On boards where the chip is supplied by a fixed regulator, it might not even be resetted during (e.g. watchdog) reboot and can be in any state. If the device is probed with VAG enabled, the driver's probe routine will generate a loud pop sound when ANA_POWER is being programmed. Avoid this by properly disabling just the VAG bit and waiting the required power down time. Signed-off-by:
Sebastian Reichel <sebastian.reichel@collabora.com> Reviewed-by:
Fabio Estevam <festivem@gmail.com> Link: https://lore.kernel.org/r/20200414181140.145825-1-sebastian.reichel@collabora.com Signed-off-by:
Mark Brown <broonie@kernel.org> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Tyler Hicks authored
[ Upstream commit b87080ea ] After successfully running the IPC msgque test once, subsequent runs result in a test failure: $ sudo ./run_kselftest.sh TAP version 13 1..1 # selftests: ipc: msgque # Failed to get stats for IPC queue with id 0 # Failed to dump queue: -22 # Bail out! # # Pass 0 Fail 0 Xfail 0 Xpass 0 Skip 0 Error 0 not ok 1 selftests: ipc: msgque # exit=1 The dump_queue() function loops through the possible message queue index values using calls to msgctl(kern_id, MSG_STAT, ...) where kern_id represents the index value. The first time the test is ran, the initial index value of 0 is valid and the test is able to complete. The index value of 0 is not valid in subsequent test runs and the loop attempts to try index values of 1, 2, 3, and so on until a valid index value is found that corresponds to the message queue created earlier in the test. The msgctl() syscall returns -1 and sets errno to EINVAL when invalid index values are used. The test failure is caused by incorrectly comparing errno to -EINVAL when cycling through possible index values. Fix invalid test failures on subsequent runs of the msgque test by correctly comparing errno values to a non-negated EINVAL. Fixes: 3a665531 ("selftests: IPC message queue copy feature test") Signed-off-by:
Tyler Hicks <tyhicks@linux.microsoft.com> Signed-off-by:
Shuah Khan <skhan@linuxfoundation.org> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Amadeusz Sławiński authored
[ Upstream commit b3677fc3 ] Function pcm_new_ver can fail, so we should check it's return value and handle possible error. Signed-off-by:
Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com> Reviewed-by:
Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Reviewed-by:
Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20200327204729.397-6-amadeuszx.slawinski@linux.intel.com Signed-off-by:
Mark Brown <broonie@kernel.org> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Alexey Kardashevskiy authored
commit dead1c84 upstream. The pseries platform uses the PCI_PROBE_DEVTREE method of PCI probing which reads "assigned-addresses" of every PCI device and initializes the device resources. However if the property is missing or zero sized, then there is no fallback of any kind and the PCI resources remain undiscovered, i.e. pdev->resource[] array remains empty. This adds a fallback which parses the "reg" property in pretty much same way except it marks resources as "unset" which later make Linux assign those resources proper addresses. This has an effect when: 1. a hypervisor failed to assign any resource for a device; 2. /chosen/linux,pci-probe-only=0 is in the DT so the system may try assigning a resource. Neither is likely to happen under PowerVM. Signed-off-by:
Alexey Kardashevskiy <aik@ozlabs.ru> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au> Cc: Guenter Roeck <linux@roeck-us.net> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Jia He authored
commit 0b841030 upstream. Ning Bo reported an abnormal 2-second gap when booting Kata container [1]. The unconditional timeout was caused by VSOCK_DEFAULT_CONNECT_TIMEOUT of connecting from the client side. The vhost vsock client tries to connect an initializing virtio vsock server. The abnormal flow looks like: host-userspace vhost vsock guest vsock ============== =========== ============ connect() --------> vhost_transport_send_pkt_work() initializing | vq->private_data==NULL | will not be queued V schedule_timeout(2s) vhost_vsock_start() <--------- device ready set vq->private_data wait for 2s and failed connect() again vq->private_data!=NULL recv connecting pkt Details: 1. Host userspace sends a connect pkt, at that time, guest vsock is under initializing, hence the vhost_vsock_start has not been called. So vq->private_data==NULL, and the pkt is not been queued to send to guest 2. Then it sleeps for 2s 3. After guest vsock finishes initializing, vq->private_data is set 4. When host userspace wakes up after 2s, send connecting pkt again, everything is fine. As suggested by Stefano Garzarella, this fixes it by additional kicking the send_pkt worker in vhost_vsock_start once the virtio device is started. This makes the pending pkt sent again. After this patch, kata-runtime (with vsock enabled) boot time is reduced from 3s to 1s on a ThunderX2 arm64 server. [1] https://github.com/kata-containers/runtime/issues/1917 Reported-by:
Ning Bo <n.b@live.com> Suggested-by:
Stefano Garzarella <sgarzare@redhat.com> Signed-off-by:
Jia He <justin.he@arm.com> Link: https://lore.kernel.org/r/20200501043840.186557-1-justin.he@arm.com Signed-off-by:
Michael S. Tsirkin <mst@redhat.com> Reviewed-by:
Stefano Garzarella <sgarzare@redhat.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
- May 06, 2020
-
-
Greg Kroah-Hartman authored
-