- Jun 23, 2021
-
-
Alexander Gordeev authored
commit 5bcbe328 upstream. The size of SIE critical section is calculated wrongly as result of a missed subtraction in commit 0b0ed657 ("s390: remove critical section cleanup from entry.S") Fixes: 0b0ed657 ("s390: remove critical section cleanup from entry.S") Cc: <stable@vger.kernel.org> Signed-off-by:
Alexander Gordeev <agordeev@linux.ibm.com> Reviewed-by:
Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by:
Heiko Carstens <hca@linux.ibm.com> Signed-off-by:
Vasily Gorbik <gor@linux.ibm.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Wanpeng Li authored
commit dfdc0a71 upstream. Commit c9b8b07c (KVM: x86: Dynamically allocate per-vCPU emulation context) tries to allocate per-vCPU emulation context dynamically, however, the x86_emulator slab cache is still exiting after the kvm module is unload as below after destroying the VM and unloading the kvm module. grep x86_emulator /proc/slabinfo x86_emulator 36 36 2672 12 8 : tunables 0 0 0 : slabdata 3 3 0 This patch fixes this slab cache leak by destroying the x86_emulator slab cache when the kvm module is unloaded. Fixes: c9b8b07c (KVM: x86: Dynamically allocate per-vCPU emulation context) Cc: stable@vger.kernel.org Signed-off-by:
Wanpeng Li <wanpengli@tencent.com> Message-Id: <1623387573-5969-1-git-send-email-wanpengli@tencent.com> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Sean Christopherson authored
commit 654430ef upstream. Calculate and check the full mmu_role when initializing the MMU context for the nested MMU, where "full" means the bits and pieces of the role that aren't handled by kvm_calc_mmu_role_common(). While the nested MMU isn't used for shadow paging, things like the number of levels in the guest's page tables are surprisingly important when walking the guest page tables. Failure to reinitialize the nested MMU context if L2's paging mode changes can result in unexpected and/or missed page faults, and likely other explosions. E.g. if an L1 vCPU is running both a 32-bit PAE L2 and a 64-bit L2, the "common" role calculation will yield the same role for both L2s. If the 64-bit L2 is run after the 32-bit PAE L2, L0 will fail to reinitialize the nested MMU context, ultimately resulting in a bad walk of L2's page tables as the MMU will still have a guest root_level of PT32E_ROOT_LEVEL. WARNING: CPU: 4 PID: 167334 at arch/x86/kvm/vmx/vmx.c:3075 ept_save_pdptrs+0x15/0xe0 [kvm_intel] Modules linked in: kvm_intel] CPU: 4 PID: 167334 Comm: CPU 3/KVM Not tainted 5.13.0-rc1-d849817d5673-reqs #185 Hardware name: ASUS Q87M-E/Q87M-E, BIOS 1102 03/03/2014 RIP: 0010:ept_save_pdptrs+0x15/0xe0 [kvm_intel] Code: <0f> 0b c3 f6 87 d8 02 00f RSP: 0018:ffffbba702dbba00 EFLAGS: 00010202 RAX: 0000000000000011 RBX: 0000000000000002 RCX: ffffffff810a2c08 RDX: ffff91d7bc30acc0 RSI: 0000000000000011 RDI: ffff91d7bc30a600 RBP: ffff91d7bc30a600 R08: 0000000000000010 R09: 0000000000000007 R10: 0000000000000000 R11: 0000000000000000 R12: ffff91d7bc30a600 R13: ffff91d7bc30acc0 R14: ffff91d67c123460 R15: 0000000115d7e005 FS: 00007fe8e9ffb700(0000) GS:ffff91d90fb00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000000 CR3: 000000029f15a001 CR4: 00000000001726e0 Call Trace: kvm_pdptr_read+0x3a/0x40 [kvm] paging64_walk_addr_generic+0x327/0x6a0 [kvm] paging64_gva_to_gpa_nested+0x3f/0xb0 [kvm] kvm_fetch_guest_virt+0x4c/0xb0 [kvm] __do_insn_fetch_bytes+0x11a/0x1f0 [kvm] x86_decode_insn+0x787/0x1490 [kvm] x86_decode_emulated_instruction+0x58/0x1e0 [kvm] x86_emulate_instruction+0x122/0x4f0 [kvm] vmx_handle_exit+0x120/0x660 [kvm_intel] kvm_arch_vcpu_ioctl_run+0xe25/0x1cb0 [kvm] kvm_vcpu_ioctl+0x211/0x5a0 [kvm] __x64_sys_ioctl+0x83/0xb0 do_syscall_64+0x40/0xb0 entry_SYSCALL_64_after_hwframe+0x44/0xae Cc: Vitaly Kuznetsov <vkuznets@redhat.com> Cc: stable@vger.kernel.org Fixes: bf627a92 ("x86/kvm/mmu: check if MMU reconfiguration is needed in init_kvm_nested_mmu()") Signed-off-by:
Sean Christopherson <seanjc@google.com> Message-Id: <20210610220026.1364486-1-seanjc@google.com> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Sean Christopherson authored
commit 78fcb2c9 upstream. Immediately reset the MMU context when the vCPU's SMM flag is cleared so that the SMM flag in the MMU role is always synchronized with the vCPU's flag. If RSM fails (which isn't correctly emulated), KVM will bail without calling post_leave_smm() and leave the MMU in a bad state. The bad MMU role can lead to a NULL pointer dereference when grabbing a shadow page's rmap for a page fault as the initial lookups for the gfn will happen with the vCPU's SMM flag (=0), whereas the rmap lookup will use the shadow page's SMM flag, which comes from the MMU (=1). SMM has an entirely different set of memslots, and so the initial lookup can find a memslot (SMM=0) and then explode on the rmap memslot lookup (SMM=1). general protection fault, probably for non-canonical address 0xdffffc0000000000: 0000 [#1] PREEMPT SMP KASAN KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007] CPU: 1 PID: 8410 Comm: syz-executor382 Not tainted 5.13.0-rc5-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 RIP: 0010:__gfn_to_rmap arch/x86/kvm/mmu/mmu.c:935 [inline] RIP: 0010:gfn_to_rmap+0x2b0/0x4d0 arch/x86/kvm/mmu/mmu.c:947 Code: <42> 80 3c 20 00 74 08 4c 89 ff e8 f1 79 a9 00 4c 89 fb 4d 8b 37 44 RSP: 0018:ffffc90000ffef98 EFLAGS: 00010246 RAX: 0000000000000000 RBX: ffff888015b9f414 RCX: ffff888019669c40 RDX: 0000000000000000 RSI: 0000000000000001 RDI: 0000000000000001 RBP: 0000000000000001 R08: ffffffff811d9cdb R09: ffffed10065a6002 R10: ffffed10065a6002 R11: 0000000000000000 R12: dffffc0000000000 R13: 0000000000000003 R14: 0000000000000001 R15: 0000000000000000 FS: 000000000124b300(0000) GS:ffff8880b9b00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000000 CR3: 0000000028e31000 CR4: 00000000001526e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: rmap_add arch/x86/kvm/mmu/mmu.c:965 [inline] mmu_set_spte+0x862/0xe60 arch/x86/kvm/mmu/mmu.c:2604 __direct_map arch/x86/kvm/mmu/mmu.c:2862 [inline] direct_page_fault+0x1f74/0x2b70 arch/x86/kvm/mmu/mmu.c:3769 kvm_mmu_do_page_fault arch/x86/kvm/mmu.h:124 [inline] kvm_mmu_page_fault+0x199/0x1440 arch/x86/kvm/mmu/mmu.c:5065 vmx_handle_exit+0x26/0x160 arch/x86/kvm/vmx/vmx.c:6122 vcpu_enter_guest+0x3bdd/0x9630 arch/x86/kvm/x86.c:9428 vcpu_run+0x416/0xc20 arch/x86/kvm/x86.c:9494 kvm_arch_vcpu_ioctl_run+0x4e8/0xa40 arch/x86/kvm/x86.c:9722 kvm_vcpu_ioctl+0x70f/0xbb0 arch/x86/kvm/../../../virt/kvm/kvm_main.c:3460 vfs_ioctl fs/ioctl.c:51 [inline] __do_sys_ioctl fs/ioctl.c:1069 [inline] __se_sys_ioctl+0xfb/0x170 fs/ioctl.c:1055 do_syscall_64+0x3f/0xb0 arch/x86/entry/common.c:47 entry_SYSCALL_64_after_hwframe+0x44/0xae RIP: 0033:0x440ce9 Cc: stable@vger.kernel.org Reported-by:
<syzbot+fb0b6a7e8713aeb0319c@syzkaller.appspotmail.com> Fixes: 9ec19493 ("KVM: x86: clear SMM flags before loading state while leaving SMM") Signed-off-by:
Sean Christopherson <seanjc@google.com> Message-Id: <20210609185619.992058-2-seanjc@google.com> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Chiqijun authored
commit ce00322c upstream. pcie_flr() starts a Function Level Reset (FLR), waits 100ms (the maximum time allowed for FLR completion by PCIe r5.0, sec 6.6.2), and waits for the FLR to complete. It assumes the FLR is complete when a config read returns valid data. When we do an FLR on several Huawei Intelligent NIC VFs at the same time, firmware on the NIC processes them serially. The VF may respond to config reads before the firmware has completed its reset processing. If we bind a driver to the VF (e.g., by assigning the VF to a virtual machine) in the interval between the successful config read and completion of the firmware reset processing, the NIC VF driver may fail to load. Prevent this driver failure by waiting for the NIC firmware to complete its reset processing. Not all NIC firmware supports this feature. [bhelgaas: commit log] Link: https://support.huawei.com/enterprise/en/doc/EDOC1100063073/87950645/vm-oss-occasionally-fail-to-load-the-in200-driver-when-the-vf-performs-flr Link: https://lore.kernel.org/r/20210414132301.1793-1-chiqijun@huawei.com Signed-off-by:
Chiqijun <chiqijun@huawei.com> Signed-off-by:
Bjorn Helgaas <bhelgaas@google.com> Reviewed-by:
Alex Williamson <alex.williamson@redhat.com> Cc: stable@vger.kernel.org Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Sriharsha Basavapatna authored
commit db2f77e2 upstream. The Broadcom BCM57414 NIC may be a multi-function device. While it does not advertise an ACS capability, peer-to-peer transactions are not possible between the individual functions, so it is safe to treat them as fully isolated. Add an ACS quirk for this device so the functions can be in independent IOMMU groups and attached individually to userspace applications using VFIO. [bhelgaas: commit log] Link: https://lore.kernel.org/r/1621645997-16251-1-git-send-email-michael.chan@broadcom.com Signed-off-by:
Sriharsha Basavapatna <sriharsha.basavapatna@broadcom.com> Signed-off-by:
Michael Chan <michael.chan@broadcom.com> Signed-off-by:
Bjorn Helgaas <bhelgaas@google.com> Cc: stable@vger.kernel.org Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Pali Rohár authored
commit f1813996 upstream. Trying to start a new PIO transfer by writing value 0 in PIO_START register when previous transfer has not yet completed (which is indicated by value 1 in PIO_START) causes an External Abort on CPU, which results in kernel panic: SError Interrupt on CPU0, code 0xbf000002 -- SError Kernel panic - not syncing: Asynchronous SError Interrupt To prevent kernel panic, it is required to reject a new PIO transfer when previous one has not finished yet. If previous PIO transfer is not finished yet, the kernel may issue a new PIO request only if the previous PIO transfer timed out. In the past the root cause of this issue was incorrectly identified (as it often happens during link retraining or after link down event) and special hack was implemented in Trusted Firmware to catch all SError events in EL3, to ignore errors with code 0xbf000002 and not forwarding any other errors to kernel and instead throw panic from EL3 Trusted Firmware handler. Links to discussion and patches about this issue: https://git.trustedfirmware.org/TF-A/trusted-firmware-a.git/commit/?id=3c7dcdac5c50 https://lore.kernel.org/linux-pci/20190316161243.29517-1-repk@triplefau.lt/ https://lore.kernel.org/linux-pci/971be151d24312cc533989a64bd454b4@www.loen.fr/ https://review.trustedfirmware.org/c/TF-A/trusted-firmware-a/+/1541 But the real cause was the fact that during link retraining or after link down event the PIO transfer may take longer time, up to the 1.44s until it times out. This increased probability that a new PIO transfer would be issued by kernel while previous one has not finished yet. After applying this change into the kernel, it is possible to revert the mentioned TF-A hack and SError events do not have to be caught in TF-A EL3. Link: https://lore.kernel.org/r/20210608203655.31228-1-pali@kernel.org Signed-off-by:
Pali Rohár <pali@kernel.org> Signed-off-by:
Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by:
Bjorn Helgaas <bhelgaas@google.com> Reviewed-by:
Marek Behún <kabel@kernel.org> Cc: stable@vger.kernel.org # 7fbcb5da ("PCI: aardvark: Don't rely on jiffies while holding spinlock") Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Shanker Donthineni authored
commit 4c207e71 upstream. Some NVIDIA GPU devices do not work with SBR. Triggering SBR leaves the device inoperable for the current system boot. It requires a system hard-reboot to get the GPU device back to normal operating condition post-SBR. For the affected devices, enable NO_BUS_RESET quirk to avoid the issue. This issue will be fixed in the next generation of hardware. Link: https://lore.kernel.org/r/20210608054857.18963-8-ameynarkhede03@gmail.com Signed-off-by:
Shanker Donthineni <sdonthineni@nvidia.com> Signed-off-by:
Bjorn Helgaas <bhelgaas@google.com> Reviewed-by:
Sinan Kaya <okaya@kernel.org> Cc: stable@vger.kernel.org Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Antti Järvinen authored
commit b5cf198e upstream. Some TI KeyStone C667X devices do not support bus/hot reset. The PCIESS automatically disables LTSSM when Secondary Bus Reset is received and device stops working. Prevent bus reset for these devices. With this change, the device can be assigned to VMs with VFIO, but it will leak state between VMs. Reference: https://e2e.ti.com/support/processors/f/791/t/954382 Link: https://lore.kernel.org/r/20210315102606.17153-1-antti.jarvinen@gmail.com Signed-off-by:
Antti Järvinen <antti.jarvinen@gmail.com> Signed-off-by:
Bjorn Helgaas <bhelgaas@google.com> Reviewed-by:
Kishon Vijay Abraham I <kishon@ti.com> Cc: stable@vger.kernel.org Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Steven Rostedt (VMware) authored
commit 89529d8b upstream. The trace_clock_global() tries to make sure the events between CPUs is somewhat in order. A global value is used and updated by the latest read of a clock. If one CPU is ahead by a little, and is read by another CPU, a lock is taken, and if the timestamp of the other CPU is behind, it will simply use the other CPUs timestamp. The lock is also only taken with a "trylock" due to tracing, and strange recursions can happen. The lock is not taken at all in NMI context. In the case where the lock is not able to be taken, the non synced timestamp is returned. But it will not be less than the saved global timestamp. The problem arises because when the time goes "backwards" the time returned is the saved timestamp plus 1. If the lock is not taken, and the plus one to the timestamp is returned, there's a small race that can cause the time to go backwards! CPU0 CPU1 ---- ---- trace_clock_global() { ts = clock() [ 1000 ] trylock(clock_lock) [ success ] global_ts = ts; [ 1000 ] <interrupted by NMI> trace_clock_global() { ts = clock() [ 999 ] if (ts < global_ts) ts = global_ts + 1 [ 1001 ] trylock(clock_lock) [ fail ] return ts [ 1001] } unlock(clock_lock); return ts; [ 1000 ] } trace_clock_global() { ts = clock() [ 1000 ] if (ts < global_ts) [ false 1000 == 1000 ] trylock(clock_lock) [ success ] global_ts = ts; [ 1000 ] unlock(clock_lock) return ts; [ 1000 ] } The above case shows to reads of trace_clock_global() on the same CPU, but the second read returns one less than the first read. That is, time when backwards, and this is not what is allowed by trace_clock_global(). This was triggered by heavy tracing and the ring buffer checker that tests for the clock going backwards: Ring buffer clock went backwards: 20613921464 -> 20613921463 ------------[ cut here ]------------ WARNING: CPU: 2 PID: 0 at kernel/trace/ring_buffer.c:3412 check_buffer+0x1b9/0x1c0 Modules linked in: [..] [CPU: 2]TIME DOES NOT MATCH expected:20620711698 actual:20620711697 delta:6790234 before:20613921463 after:20613921463 [20613915818] PAGE TIME STAMP [20613915818] delta:0 [20613915819] delta:1 [20613916035] delta:216 [20613916465] delta:430 [20613916575] delta:110 [20613916749] delta:174 [20613917248] delta:499 [20613917333] delta:85 [20613917775] delta:442 [20613917921] delta:146 [20613918321] delta:400 [20613918568] delta:247 [20613918768] delta:200 [20613919306] delta:538 [20613919353] delta:47 [20613919980] delta:627 [20613920296] delta:316 [20613920571] delta:275 [20613920862] delta:291 [20613921152] delta:290 [20613921464] delta:312 [20613921464] delta:0 TIME EXTEND [20613921464] delta:0 This happened more than once, and always for an off by one result. It also started happening after commit aafe104a was added. Cc: stable@vger.kernel.org Fixes: aafe104a ("tracing: Restructure trace_clock_global() to never block") Signed-off-by:
Steven Rostedt (VMware) <rostedt@goodmis.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Steven Rostedt (VMware) authored
commit 4fdd595e upstream. A while ago, when the "trace" file was opened, tracing was stopped, and code was added to stop recording the comms to saved_cmdlines, for mapping of the pids to the task name. Code has been added that only records the comm if a trace event occurred, and there's no reason to not trace it if the trace file is opened. Cc: stable@vger.kernel.org Fixes: 7ffbd48d ("tracing: Cache comms only after an event occurred") Signed-off-by:
Steven Rostedt (VMware) <rostedt@goodmis.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Steven Rostedt (VMware) authored
commit 85550c83 upstream. The saved_cmdlines is used to map pids to the task name, such that the output of the tracing does not just show pids, but also gives a human readable name for the task. If the name is not mapped, the output looks like this: <...>-1316 [005] ...2 132.044039: ... Instead of this: gnome-shell-1316 [005] ...2 132.044039: ... The names are updated when tracing is running, but are skipped if tracing is stopped. Unfortunately, this stops the recording of the names if the top level tracer is stopped, and not if there's other tracers active. The recording of a name only happens when a new event is written into a ring buffer, so there is no need to test if tracing is on or not. If tracing is off, then no event is written and no need to test if tracing is off or not. Remove the check, as it hides the names of tasks for events in the instance buffers. Cc: stable@vger.kernel.org Fixes: 7ffbd48d ("tracing: Cache comms only after an event occurred") Signed-off-by:
Steven Rostedt (VMware) <rostedt@goodmis.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Breno Lima authored
commit c6d580d9 upstream. i.MX8MM cannot detect certain CDP USB HUBs. usbmisc_imx.c driver is not following CDP timing requirements defined by USB BC 1.2 specification and section 3.2.4 Detection Timing CDP. During Primary Detection the i.MX device should turn on VDP_SRC and IDM_SINK for a minimum of 40ms (TVDPSRC_ON). After a time of TVDPSRC_ON, the i.MX is allowed to check the status of the D- line. Current implementation is waiting between 1ms and 2ms, and certain BC 1.2 complaint USB HUBs cannot be detected. Increase delay to 40ms allowing enough time for primary detection. During secondary detection the i.MX is required to disable VDP_SRC and IDM_SNK, and enable VDM_SRC and IDP_SINK for at least 40ms (TVDMSRC_ON). Current implementation is not disabling VDP_SRC and IDM_SNK, introduce disable sequence in imx7d_charger_secondary_detection() function. VDM_SRC and IDP_SINK should be enabled for at least 40ms (TVDMSRC_ON). Increase delay allowing enough time for detection. Cc: <stable@vger.kernel.org> Fixes: 746f316b ("usb: chipidea: introduce imx7d USB charger detection") Signed-off-by:
Breno Lima <breno.lima@nxp.com> Signed-off-by:
Jun Li <jun.li@nxp.com> Link: https://lore.kernel.org/r/20210614175013.495808-1-breno.lima@nxp.com Signed-off-by:
Peter Chen <peter.chen@kernel.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Andrew Lunn authored
commit a7d8d1c7 upstream. The Cypress CY7C65632 appears to have an issue with auto suspend and detecting devices, not too dissimilar to the SMSC 5534B hub. It is easiest to reproduce by connecting multiple mass storage devices to the hub at the same time. On a Lenovo Yoga, around 1 in 3 attempts result in the devices not being detected. It is however possible to make them appear using lsusb -v. Disabling autosuspend for this hub resolves the issue. Fixes: 1208f9e1 ("USB: hub: Fix the broken detection of USB3 device in SMSC hub") Cc: stable@vger.kernel.org Signed-off-by:
Andrew Lunn <andrew@lunn.ch> Link: https://lore.kernel.org/r/20210614155524.2228800-1-andrew@lunn.ch Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Pavel Skripkin authored
commit 91c02557 upstream. Syzbot reported memory leak in SocketCAN driver for Microchip CAN BUS Analyzer Tool. The problem was in unfreed usb_coherent. In mcba_usb_start() 20 coherent buffers are allocated and there is nothing, that frees them: 1) In callback function the urb is resubmitted and that's all 2) In disconnect function urbs are simply killed, but URB_FREE_BUFFER is not set (see mcba_usb_start) and this flag cannot be used with coherent buffers. Fail log: | [ 1354.053291][ T8413] mcba_usb 1-1:0.0 can0: device disconnected | [ 1367.059384][ T8420] kmemleak: 20 new suspected memory leaks (see /sys/kernel/debug/kmem) So, all allocated buffers should be freed with usb_free_coherent() explicitly NOTE: The same pattern for allocating and freeing coherent buffers is used in drivers/net/can/usb/kvaser_usb/kvaser_usb_core.c Fixes: 51f3baad ("can: mcba_usb: Add support for Microchip CAN BUS Analyzer") Link: https://lore.kernel.org/r/20210609215833.30393-1-paskripkin@gmail.com Cc: linux-stable <stable@vger.kernel.org> Reported-and-tested-by:
<syzbot+57281c762a3922e14dfe@syzkaller.appspotmail.com> Signed-off-by:
Pavel Skripkin <paskripkin@gmail.com> Signed-off-by:
Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Oleksij Rempel authored
commit 2030043e upstream. This patch fixes a Use-after-Free found by the syzbot. The problem is that a skb is taken from the per-session skb queue, without incrementing the ref count. This leads to a Use-after-Free if the skb is taken concurrently from the session queue due to a CTS. Fixes: 9d71dd0c ("can: add support of SAE J1939 protocol") Link: https://lore.kernel.org/r/20210521115720.7533-1-o.rempel@pengutronix.de Cc: Hillf Danton <hdanton@sina.com> Cc: linux-stable <stable@vger.kernel.org> Reported-by:
<syzbot+220c1a29987a9a490903@syzkaller.appspotmail.com> Reported-by:
<syzbot+45199c1b73b4013525cf@syzkaller.appspotmail.com> Signed-off-by:
Oleksij Rempel <o.rempel@pengutronix.de> Signed-off-by:
Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Tetsuo Handa authored
commit 8d0caedb upstream. syzbot is reporting hung task at register_netdevice_notifier() [1] and unregister_netdevice_notifier() [2], for cleanup_net() might perform time consuming operations while CAN driver's raw/bcm/isotp modules are calling {register,unregister}_netdevice_notifier() on each socket. Change raw/bcm/isotp modules to call register_netdevice_notifier() from module's __init function and call unregister_netdevice_notifier() from module's __exit function, as with gw/j1939 modules are doing. Link: https://syzkaller.appspot.com/bug?id=391b9498827788b3cc6830226d4ff5be87107c30 [1] Link: https://syzkaller.appspot.com/bug?id=1724d278c83ca6e6df100a2e320c10d991cf2bce [2] Link: https://lore.kernel.org/r/54a5f451-05ed-f977-8534-79e7aa2bcc8f@i-love.sakura.ne.jp Cc: linux-stable <stable@vger.kernel.org> Reported-by:
syzbot <syzbot+355f8edb2ff45d5f95fa@syzkaller.appspotmail.com> Reported-by:
syzbot <syzbot+0f1827363a305f74996f@syzkaller.appspotmail.com> Reviewed-by:
Kirill Tkhai <ktkhai@virtuozzo.com> Tested-by:
syzbot <syzbot+355f8edb2ff45d5f95fa@syzkaller.appspotmail.com> Tested-by:
Oliver Hartkopp <socketcan@hartkopp.net> Signed-off-by:
Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Signed-off-by:
Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Norbert Slusarek authored
commit 5e87ddbe upstream. On 64-bit systems, struct bcm_msg_head has an added padding of 4 bytes between struct members count and ival1. Even though all struct members are initialized, the 4-byte hole will contain data from the kernel stack. This patch zeroes out struct bcm_msg_head before usage, preventing infoleaks to userspace. Fixes: ffd980f9 ("[CAN]: Add broadcast manager (bcm) protocol") Link: https://lore.kernel.org/r/trinity-7c1b2e82-e34f-4885-8060-2cd7a13769ce-1623532166177@3c-app-gmx-bs52 Cc: linux-stable <stable@vger.kernel.org> Signed-off-by:
Norbert Slusarek <nslusarek@gmx.net> Acked-by:
Oliver Hartkopp <socketcan@hartkopp.net> Signed-off-by:
Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Daniel Borkmann authored
[ Upstream commit fe9a5ca7 ] ... in such circumstances, we do not want to mark the instruction as seen given the goal is still to jmp-1 rewrite/sanitize dead code, if it is not reachable from the non-speculative path verification. We do however want to verify it for safety regardless. With the patch as-is all the insns that have been marked as seen before the patch will also be marked as seen after the patch (just with a potentially different non-zero count). An upcoming patch will also verify paths that are unreachable in the non-speculative domain, hence this extension is needed. Signed-off-by:
Daniel Borkmann <daniel@iogearbox.net> Reviewed-by:
John Fastabend <john.fastabend@gmail.com> Reviewed-by:
Benedict Schlueter <benedict.schlueter@rub.de> Reviewed-by:
Piotr Krysiuk <piotras@gmail.com> Acked-by:
Alexei Starovoitov <ast@kernel.org> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Daniel Borkmann authored
[ Upstream commit d203b0fd ] Instead of relying on current env->pass_cnt, use the seen count from the old aux data in adjust_insn_aux_data(), and expand it to the new range of patched instructions. This change is valid given we always expand 1:n with n>=1, so what applies to the old/original instruction needs to apply for the replacement as well. Not relying on env->pass_cnt is a prerequisite for a later change where we want to avoid marking an instruction seen when verified under speculative execution path. Signed-off-by:
Daniel Borkmann <daniel@iogearbox.net> Reviewed-by:
John Fastabend <john.fastabend@gmail.com> Reviewed-by:
Benedict Schlueter <benedict.schlueter@rub.de> Reviewed-by:
Piotr Krysiuk <piotras@gmail.com> Acked-by:
Alexei Starovoitov <ast@kernel.org> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Marc Zyngier authored
[ Upstream commit 382e6e17 ] The arm64 entry code suffers from an annoying issue on taking a NMI, as it sets PMR to a value that actually allows IRQs to be acknowledged. This is done for consistency with other parts of the code, and is in the process of being fixed. This shouldn't be a problem, as we are not enabling interrupts whilst in NMI context. However, in the infortunate scenario that we took a spurious NMI (retired before the read of IAR) *and* that there is an IRQ pending at the same time, we'll ack the IRQ in NMI context. Too bad. In order to avoid deadlocks while running something like perf, teach the GICv3 driver about this situation: if we were in a context where no interrupt should have fired, transiently set PMR to a value that only allows NMIs before acking the pending interrupt, and restore the original value after that. This papers over the core issue for the time being, and makes NMIs great again. Sort of. Fixes: 4d6a38da ("arm64: entry: always set GIC_PRIO_PSR_I_SET during entry") Co-developed-by:
Mark Rutland <mark.rutland@arm.com> Signed-off-by:
Mark Rutland <mark.rutland@arm.com> Signed-off-by:
Marc Zyngier <maz@kernel.org> Reviewed-by:
Mark Rutland <mark.rutland@arm.com> Link: https://lore.kernel.org/lkml/20210610145731.1350460-1-maz@kernel.org Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Feng Tang authored
[ Upstream commit 2e302543 ] 0day robot reported a 9.2% regression for will-it-scale mmap1 test case[1], caused by commit 57efa1fe ("mm/gup: prevent gup_fast from racing with COW during fork"). Further debug shows the regression is due to that commit changes the offset of hot fields 'mmap_lock' inside structure 'mm_struct', thus some cache alignment changes. From the perf data, the contention for 'mmap_lock' is very severe and takes around 95% cpu cycles, and it is a rw_semaphore struct rw_semaphore { atomic_long_t count; /* 8 bytes */ atomic_long_t owner; /* 8 bytes */ struct optimistic_spin_queue osq; /* spinner MCS lock */ ... Before commit 57efa1fe adds the 'write_protect_seq', it happens to have a very optimal cache alignment layout, as Linus explained: "and before the addition of the 'write_protect_seq' field, the mmap_sem was at offset 120 in 'struct mm_struct'. Which meant that count and owner were in two different cachelines, and then when you have contention and spend time in rwsem_down_write_slowpath(), this is probably *exactly* the kind of layout you want. Because first the rwsem_write_trylock() will do a cmpxchg on the first cacheline (for the optimistic fast-path), and then in the case of contention, rwsem_down_write_slowpath() will just access the second cacheline. Which is probably just optimal for a load that spends a lot of time contended - new waiters touch that first cacheline, and then they queue themselves up on the second cacheline." After the commit, the rw_semaphore is at offset 128, which means the 'count' and 'owner' fields are now in the same cacheline, and causes more cache bouncing. Currently there are 3 "#ifdef CONFIG_XXX" before 'mmap_lock' which will affect its offset: CONFIG_MMU CONFIG_MEMBARRIER CONFIG_HAVE_ARCH_COMPAT_MMAP_BASES The layout above is on 64 bits system with 0day's default kernel config (similar to RHEL-8.3's config), in which all these 3 options are 'y'. And the layout can vary with different kernel configs. Relayouting a structure is usually a double-edged sword, as sometimes it can helps one case, but hurt other cases. For this case, one solution is, as the newly added 'write_protect_seq' is a 4 bytes long seqcount_t (when CONFIG_DEBUG_LOCK_ALLOC=n), placing it into an existing 4 bytes hole in 'mm_struct' will not change other fields' alignment, while restoring the regression. Link: https://lore.kernel.org/lkml/20210525031636.GB7744@xsang-OptiPlex-9020/ [1] Reported-by:
kernel test robot <oliver.sang@intel.com> Signed-off-by:
Feng Tang <feng.tang@intel.com> Reviewed-by:
John Hubbard <jhubbard@nvidia.com> Reviewed-by:
Jason Gunthorpe <jgg@nvidia.com> Cc: Peter Xu <peterx@redhat.com> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Riwen Lu authored
[ Upstream commit 78d13552 ] The scpi hwmon shows the sub-zero temperature in an unsigned integer, which would confuse the users when the machine works in low temperature environment. This shows the sub-zero temperature in an signed value and users can get it properly from sensors. Signed-off-by:
Riwen Lu <luriwen@kylinos.cn> Tested-by:
Xin Chen <chenxin@kylinos.cn> Link: https://lore.kernel.org/r/20210604030959.736379-1-luriwen@kylinos.cn Signed-off-by:
Guenter Roeck <linux@roeck-us.net> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Chen Li authored
[ Upstream commit ab8363d3 ] I met a gpu addr bug recently and the kernel log tells me the pc is memcpy/memset and link register is radeon_uvd_resume. As we know, in some architectures, optimized memcpy/memset may not work well on device memory. Trival memcpy_toio/memset_io can fix this problem. BTW, amdgpu has already done it in: commit ba0b2275 ("drm/amdgpu: use memcpy_to/fromio for UVD fw upload"), that's why it has no this issue on the same gpu and platform. Signed-off-by:
Chen Li <chenli@uniontech.com> Reviewed-by:
Christian König <christian.koenig@amd.com> Signed-off-by:
Alex Deucher <alexander.deucher@amd.com> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Srinivasa Rao Mandadapu authored
[ Upstream commit c8a4556d ] This patch fixes PoP noise of around 15ms observed during audio capture begin. Enables BCLK and LRCLK in snd_soc_dai_ops prepare call for introducing some delay before capture start. (am from https://patchwork.kernel.org/patch/12276369/) (also found at https://lore.kernel.org/r/20210524142114.18676-1-srivasam@codeaurora.org) Co-developed-by:
Judy Hsiao <judyhsiao@chromium.org> Signed-off-by:
Judy Hsiao <judyhsiao@chromium.org> Signed-off-by:
Srinivasa Rao Mandadapu <srivasam@codeaurora.org> Reviewed-by:
Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Link: https://lore.kernel.org/r/20210604154545.1198337-1-judyhsiao@chromium.org Signed-off-by:
Mark Brown <broonie@kernel.org> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Saravana Kannan authored
[ Upstream commit 9bf37977 ] On sunxi boards that use HDMI output, HDMI device probe keeps being avoided indefinitely with these repeated messages in dmesg: platform 1ee0000.hdmi: probe deferral - supplier 1ef0000.hdmi-phy not ready There's a fwnode_link being created with fw_devlink=on between hdmi and hdmi-phy nodes, because both nodes have 'compatible' property set. Fw_devlink code assumes that nodes that have compatible property set will also have a device associated with them by some driver eventually. This is not the case with the current sun8i-hdmi driver. This commit makes sun8i-hdmi-phy into a proper platform device and fixes the display pipeline probe on sunxi boards that use HDMI. More context: https://lkml.org/lkml/2021/5/16/203 Signed-off-by:
Saravana Kannan <saravanak@google.com> Signed-off-by:
Ondrej Jirman <megous@megous.com> Tested-by:
Andre Przywara <andre.przywara@arm.com> Signed-off-by:
Maxime Ripard <maxime@cerno.tech> Link: https://patchwork.freedesktop.org/patch/msgid/20210607085836.2827429-1-megous@megous.com Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Sergio Paracuellos authored
[ Upstream commit eb367d87 ] In 'rt2880_pmx_group_enable' driver is printing an error and returning -EBUSY if a pin has been already enabled. This begets anoying messages in the caller when this happens like the following: rt2880-pinmux pinctrl: pcie is already enabled mt7621-pci 1e140000.pcie: Error applying setting, reverse things back To avoid this just print the already enabled message in the pinctrl driver and return 0 instead to not confuse the user with a real bad problem. Signed-off-by:
Sergio Paracuellos <sergio.paracuellos@gmail.com> Link: https://lore.kernel.org/r/20210604055337.20407-1-sergio.paracuellos@gmail.com Signed-off-by:
Linus Walleij <linus.walleij@linaro.org> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Oder Chiou authored
[ Upstream commit 49783c6f ] Based on ("5a15cd7f "), the setting also should be set in soundwire mode. Signed-off-by:
Oder Chiou <oder_chiou@realtek.com> Link: https://lore.kernel.org/r/20210604063150.29925-1-oder_chiou@realtek.com Signed-off-by:
Mark Brown <broonie@kernel.org> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Axel Lin authored
[ Upstream commit cb2381cb ] devm_gpiod_get_array_optional may return NULL if no GPIO was assigned. Signed-off-by:
Axel Lin <axel.lin@ingics.com> Link: https://lore.kernel.org/r/20210603094944.1114156-1-axel.lin@ingics.com Signed-off-by:
Mark Brown <broonie@kernel.org> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Patrice Chotard authored
[ Upstream commit d38fa9a1 ] In U-boot side, an issue has been encountered when QSPI source clock is running at low frequency (24 MHz for example), waiting for TCF bit to be set didn't ensure that all data has been send out the FIFO, we should also wait that BUSY bit is cleared. To prevent similar issue in kernel driver, we implement similar behavior by always waiting BUSY bit to be cleared. Signed-off-by:
Patrice Chotard <patrice.chotard@foss.st.com> Link: https://lore.kernel.org/r/20210603073421.8441-1-patrice.chotard@foss.st.com Signed-off-by:
Mark Brown <broonie@kernel.org> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Richard Weinberger authored
[ Upstream commit 8bef925e ] TAS2562_TDM_CFG0_SAMPRATE_MASK starts at bit 1, not 0. So all values need to be left shifted by 1. Signed-off-by:
Richard Weinberger <richard@nod.at> Link: https://lore.kernel.org/r/20210530203446.19022-1-richard@nod.at Signed-off-by:
Mark Brown <broonie@kernel.org> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Vincent Guittot authored
[ Upstream commit fcf6631f ] Rounding in PELT calculation happening when entities are attached/detached of a cfs_rq can result into situations where util/runnable_avg is not null but util/runnable_sum is. This is normally not possible so we need to ensure that util/runnable_sum stays synced with util/runnable_avg. detach_entity_load_avg() is the last place where we don't sync util/runnable_sum with util/runnbale_avg when moving some sched_entities Signed-off-by:
Vincent Guittot <vincent.guittot@linaro.org> Signed-off-by:
Peter Zijlstra (Intel) <peterz@infradead.org> Link: https://lkml.kernel.org/r/20210601085832.12626-1-vincent.guittot@linaro.org Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
zpershuai authored
[ Upstream commit f131767e ] In zynq_qspi_probe function, when enable the device clock is done, the return of all the functions should goto the clk_dis_all label. If num_cs is not right then this should return a negative error code but currently it returns success. Signed-off-by:
zpershuai <zpershuai@gmail.com> Link: https://lore.kernel.org/r/1622110857-21812-1-git-send-email-zpershuai@gmail.com Signed-off-by:
Mark Brown <broonie@kernel.org> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
ChiYuan Huang authored
[ Upstream commit 46639a5e ] - Fix to make regcache value first reading back from HW. Signed-off-by:
ChiYuan Huang <cy_huang@richtek.com> Link: https://lore.kernel.org/r/1622542155-6373-1-git-send-email-u0084500@gmail.com Signed-off-by:
Mark Brown <broonie@kernel.org> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Nicolas Cavallari authored
[ Upstream commit a8437f05 ] Otherwise, when compiled as module, a WARN_ON is triggered: WARNING: CPU: 0 PID: 5 at sound/core/init.c:208 snd_card_new+0x310/0x39c [snd] [...] CPU: 0 PID: 5 Comm: kworker/0:0 Not tainted 5.10.39 #1 Hardware name: Freescale i.MX6 Quad/DualLite (Device Tree) Workqueue: events deferred_probe_work_func [<c0111988>] (unwind_backtrace) from [<c010c8ac>] (show_stack+0x10/0x14) [<c010c8ac>] (show_stack) from [<c092784c>] (dump_stack+0xdc/0x104) [<c092784c>] (dump_stack) from [<c0129710>] (__warn+0xd8/0x114) [<c0129710>] (__warn) from [<c0922a48>] (warn_slowpath_fmt+0x5c/0xc4) [<c0922a48>] (warn_slowpath_fmt) from [<bf0496f8>] (snd_card_new+0x310/0x39c [snd]) [<bf0496f8>] (snd_card_new [snd]) from [<bf1d7df8>] (snd_soc_bind_card+0x334/0x9c4 [snd_soc_core]) [<bf1d7df8>] (snd_soc_bind_card [snd_soc_core]) from [<bf1e9cd8>] (devm_snd_soc_register_card+0x30/0x6c [snd_soc_core]) [<bf1e9cd8>] (devm_snd_soc_register_card [snd_soc_core]) from [<bf22d964>] (fsl_asoc_card_probe+0x550/0xcc8 [snd_soc_fsl_asoc_card]) [<bf22d964>] (fsl_asoc_card_probe [snd_soc_fsl_asoc_card]) from [<c060c930>] (platform_drv_probe+0x48/0x98) [...] Signed-off-by:
Nicolas Cavallari <nicolas.cavallari@green-communications.fr> Acked-by:
Shengjiu Wang <shengjiu.wang@gmail.com> Link: https://lore.kernel.org/r/20210527163409.22049-1-nicolas.cavallari@green-communications.fr Signed-off-by:
Mark Brown <broonie@kernel.org> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Tiezhu Yang authored
[ Upstream commit aaac9a1b ] Use clk_disable_unprepare() in the error path of mtk_phy_init() to fix some resource leaks. Reported-by:
kernel test robot <lkp@intel.com> Reported-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
Tiezhu Yang <yangtiezhu@loongson.cn> Reviewed-by:
Chunfeng Yun <chunfeng.yun@mediatek.com> Link: https://lore.kernel.org/r/1621420659-15858-1-git-send-email-yangtiezhu@loongson.cn Signed-off-by:
Vinod Koul <vkoul@kernel.org> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Jack Yu authored
[ Upstream commit 6308c44e ] The power of "LDO2", "MICBIAS1" and "Mic Det Power" were powered off after the DAPM widgets were added, and these powers were set by the JD settings "RT5659_JD_HDA_HEADER" in the probe function. In the codec probe function, these powers were ignored to prevent them controlled by DAPM. Signed-off-by:
Oder Chiou <oder_chiou@realtek.com> Signed-off-by:
Jack Yu <jack.yu@realtek.com> Message-Id: <15fced51977b458798ca4eebf03dafb9@realtek.com> Signed-off-by:
Mark Brown <broonie@kernel.org> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Til Jasper Ullrich authored
[ Upstream commit c0e0436c ] The X1 Carbon Gen 9 uses two fans instead of one like the previous generation. This adds support for the second fan. It has been tested on my X1 Carbon Gen 9 (20XXS00100) and works fine. Signed-off-by:
Til Jasper Ullrich <tju@tju.me> Link: https://lore.kernel.org/r/20210525150950.14805-1-tju@tju.me Signed-off-by:
Hans de Goede <hdegoede@redhat.com> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Axel Lin authored
[ Upstream commit 0514582a ] The valid selectors for bd70528 bucks are 0 ~ 0xf, so the .n_voltages should be 16 (0x10). Use 0x10 to make it consistent with BD70528_LDO_VOLTS. Also remove redundant defines for BD70528_BUCK_VOLTS. Signed-off-by:
Axel Lin <axel.lin@ingics.com> Acked-by:
Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com> Link: https://lore.kernel.org/r/20210523071045.2168904-1-axel.lin@ingics.com Signed-off-by:
Mark Brown <broonie@kernel.org> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Axel Lin authored
[ Upstream commit 3d681804 ] Show proper error code instead of 0. Signed-off-by:
Axel Lin <axel.lin@ingics.com> Link: https://lore.kernel.org/r/20210512075824.620580-1-axel.lin@ingics.com Signed-off-by:
Mark Brown <broonie@kernel.org> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-