commit a89936cc upstream.

The tty driver name is used also after registering the driver and must
specifically not be allocated on the stack to avoid leaking information
to user space (or triggering an oops).

Drivers should not try to encode topology information in the tty device
name but this one snuck in through staging without anyone noticing and
another driver has since copied this malpractice.

Fixing the ABI is a separate issue, but this at least plugs the security
hole.

Fixes: ba4dc61f

 ("Staging: ipack: add support for IP-OCTAL mezzanine board")
Cc: stable@vger.kernel.org      # 3.5
Acked-by: Samuel Iglesias Gonsalvez <siglesias@igalia.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://lore.kernel.org/r/20210917114622.5412-2-johan@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit 51032e6f ]

The e100_get_regs function is used to implement a simple register dump
for the e100 device. The data is broken into a couple of MAC control
registers, and then a series of PHY registers, followed by a memory dump
buffer.

The total length of the register dump is defined as (1 + E100_PHY_REGS)
* sizeof(u32) + sizeof(nic->mem->dump_buf).

The logic for filling in the PHY registers uses a convoluted inverted
count for loop which counts from E100_PHY_REGS (0x1C) down to 0, and
assigns the slots 1 + E100_PHY_REGS - i. The first loop iteration will
fill in [1] and the final loop iteration will fill in [1 + 0x1C]. This
is actually one more than the supposed number of PHY registers.

The memory dump buffer is then filled into the space at
[2 + E100_PHY_REGS] which will cause that memcpy to assign 4 bytes past
the total size.

The end result is that we overrun the total buffer size allocated by the
kernel, which could lead to a panic or other issues due to memory
corruption.

It is difficult to determine the actual total number of registers
here. The only 8255x datasheet I could find indicates there are 28 total
MDI registers. However, we're reading 29 here, and reading them in
reverse!

In addition, the ethtool e100 register dump interface appears to read
the first PHY register to determine if the device is in MDI or MDIx
mode. This doesn't appear to be documented anywhere within the 8255x
datasheet. I can only assume it must be in register 28 (the extra
register we're reading here).

Lets not change any of the intended meaning of what we copy here. Just
extend the space by 4 bytes to account for the extra register and
continue copying the data out in the same order.

Change the E100_PHY_REGS value to be the correct total (29) so that the
total register dump size is calculated properly. Fix the offset for
where we copy the dump buffer so that it doesn't overrun the total size.

Re-write the for loop to use counting up instead of the convoluted
down-counting. Correct the mdio_read offset to use the 0-based register
offsets, but maintain the bizarre reverse ordering so that we have the
ABI expected by applications like ethtool. This requires and additional
subtraction of 1. It seems a bit odd but it makes the flow of assignment
into the register buffer easier to follow.

Fixes: 1da177e4

 ("Linux-2.6.12-rc2")
Reported-by: Felicitas Hetzelt <felicitashetzelt@gmail.com>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 4329c8dc ]

commit abf9b902 ("e100: cleanup unneeded math") tried to simplify
e100_get_regs_len and remove a double 'divide and then multiply'
calculation that the e100_reg_regs_len function did.

This change broke the size calculation entirely as it failed to account
for the fact that the numbered registers are actually 4 bytes wide and
not 1 byte. This resulted in a significant under allocation of the
register buffer used by e100_get_regs.

Fix this by properly multiplying the register count by u32 first before
adding the size of the dump buffer.

Fixes: abf9b902

 ("e100: cleanup unneeded math")
Reported-by: Felicitas Hetzelt <felicitashetzelt@gmail.com>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 724e8af8 ]

Old code produces -24999 for 0b1110011100000000 input in standard format due to
always rounding up rather than "away from zero".

Use the common macro for division, unify and simplify the conversion code along
the way.

Fixes: 9410700b

 ("hwmon: Add driver for Texas Instruments TMP421/422/423 sensor chips")
Signed-off-by: Paul Fertser <fercerpav@gmail.com>
Link: https://lore.kernel.org/r/20210924093011.26083-3-fercerpav@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 13cb6d82

 ]

Limit max values for vht mcs and nss in ieee80211_parse_tx_radiotap
routine in order to fix the following warning reported by syzbot:

WARNING: CPU: 0 PID: 10717 at include/net/mac80211.h:989 ieee80211_rate_set_vht include/net/mac80211.h:989 [inline]
WARNING: CPU: 0 PID: 10717 at include/net/mac80211.h:989 ieee80211_parse_tx_radiotap+0x101e/0x12d0 net/mac80211/tx.c:2244
Modules linked in:
CPU: 0 PID: 10717 Comm: syz-executor.5 Not tainted 5.14.0-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
RIP: 0010:ieee80211_rate_set_vht include/net/mac80211.h:989 [inline]
RIP: 0010:ieee80211_parse_tx_radiotap+0x101e/0x12d0 net/mac80211/tx.c:2244
RSP: 0018:ffffc9000186f3e8 EFLAGS: 00010216
RAX: 0000000000000618 RBX: ffff88804ef76500 RCX: ffffc900143a5000
RDX: 0000000000040000 RSI: ffffffff888f478e RDI: 0000000000000003
RBP: 00000000ffffffff R08: 0000000000000000 R09: 0000000000000100
R10: ffffffff888f46f9 R11: 0000000000000000 R12: 00000000fffffff8
R13: ffff88804ef7653c R14: 0000000000000001 R15: 0000000000000004
FS:  00007fbf5718f700(0000) GS:ffff8880b9c00000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000001b2de23000 CR3: 000000006a671000 CR4: 00000000001506f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000600
Call Trace:
 ieee80211_monitor_select_queue+0xa6/0x250 net/mac80211/iface.c:740
 netdev_core_pick_tx+0x169/0x2e0 net/core/dev.c:4089
 __dev_queue_xmit+0x6f9/0x3710 net/core/dev.c:4165
 __bpf_tx_skb net/core/filter.c:2114 [inline]
 __bpf_redirect_no_mac net/core/filter.c:2139 [inline]
 __bpf_redirect+0x5ba/0xd20 net/core/filter.c:2162
 ____bpf_clone_redirect net/core/filter.c:2429 [inline]
 bpf_clone_redirect+0x2ae/0x420 net/core/filter.c:2401
 bpf_prog_eeb6f53a69e5c6a2+0x59/0x234
 bpf_dispatcher_nop_func include/linux/bpf.h:717 [inline]
 __bpf_prog_run include/linux/filter.h:624 [inline]
 bpf_prog_run include/linux/filter.h:631 [inline]
 bpf_test_run+0x381/0xa30 net/bpf/test_run.c:119
 bpf_prog_test_run_skb+0xb84/0x1ee0 net/bpf/test_run.c:663
 bpf_prog_test_run kernel/bpf/syscall.c:3307 [inline]
 __sys_bpf+0x2137/0x5df0 kernel/bpf/syscall.c:4605
 __do_sys_bpf kernel/bpf/syscall.c:4691 [inline]
 __se_sys_bpf kernel/bpf/syscall.c:4689 [inline]
 __x64_sys_bpf+0x75/0xb0 kernel/bpf/syscall.c:4689
 do_syscall_x64 arch/x86/entry/common.c:50 [inline]
 do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80
 entry_SYSCALL_64_after_hwframe+0x44/0xae
RIP: 0033:0x4665f9

Reported-by:  <syzbot+0196ac871673f0c20f68@syzkaller.appspotmail.com>
Fixes: 646e76bb

 ("mac80211: parse VHT info in injected frames")
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://lore.kernel.org/r/c26c3f02dcb38ab63b2f2534cb463d95ee81bb13.1632141760.git.lorenzo@kernel.org
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 69e73dbf ]

ip_vs_conn_tab_bits may be provided by the user through the
conn_tab_bits module parameter. If this value is greater than 31, or
less than 0, the shift operator used to derive tab_size causes undefined
behaviour.

Fix this checking ip_vs_conn_tab_bits value to be in the range specified
in ipvs Kconfig. If not, simply use default value.

Fixes: 6f7edb48

 ("IPVS: Allow boot time change of hash size")
Reported-by: Yi Chen <yiche@redhat.com>
Signed-off-by: Andrea Claudi <aclaudi@redhat.com>
Acked-by: Julian Anastasov <ja@ssi.bg>
Acked-by: Simon Horman <horms@verge.net.au>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

commit 94513069 upstream.

When PN checking is done in mac80211, for fragmentation we need
to copy the PN to the RX struct so we can later use it to do a
comparison, since commit bf30ca92 ("mac80211: check defrag
PN against current frame").

Unfortunately, in that commit I used the 'hdr' variable without
it being necessarily valid, so use-after-free could occur if it
was necessary to reallocate (parts of) the frame.

Fix this by reloading the variable after the code that results
in the reallocations, if any.

This fixes https://bugzilla.kernel.org/show_bug.cgi?id=214401.

Cc: stable@vger.kernel.org
Fixes: bf30ca92

 ("mac80211: check defrag PN against current frame")
Link: https://lore.kernel.org/r/20210927115838.12b9ac6bb233.I1d066acd5408a662c3b6e828122cd314fcb28cdb@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit cdef1196 ]

Since commit e5c6b312 ("cpufreq: schedutil: Use kobject release()
method to free sugov_tunables") kobject_put() has kfree()d the
attr_set before gov_attr_set_put() returns.

kobject_put() isn't the last user of attr_set in gov_attr_set_put(),
the subsequent mutex_destroy() triggers a use-after-free:
| BUG: KASAN: use-after-free in mutex_is_locked+0x20/0x60
| Read of size 8 at addr ffff000800ca4250 by task cpuhp/2/20
|
| CPU: 2 PID: 20 Comm: cpuhp/2 Not tainted 5.15.0-rc1 #12369
| Hardware name: ARM LTD ARM Juno Development Platform/ARM Juno Development
| Platform, BIOS EDK II Jul 30 2018
| Call trace:
|  dump_backtrace+0x0/0x380
|  show_stack+0x1c/0x30
|  dump_stack_lvl+0x8c/0xb8
|  print_address_description.constprop.0+0x74/0x2b8
|  kasan_report+0x1f4/0x210
|  kasan_check_range+0xfc/0x1a4
|  __kasan_check_read+0x38/0x60
|  mutex_is_locked+0x20/0x60
|  mutex_destroy+0x80/0x100
|  gov_attr_set_put+0xfc/0x150
|  sugov_exit+0x78/0x190
|  cpufreq_offline.isra.0+0x2c0/0x660
|  cpuhp_cpufreq_offline+0x14/0x24
|  cpuhp_invoke_callback+0x430/0x6d0
|  cpuhp_thread_fun+0x1b0/0x624
|  smpboot_thread_fn+0x5e0/0xa6c
|  kthread+0x3a0/0x450
|  ret_from_fork+0x10/0x20

Swap the order of the calls.

Fixes: e5c6b312

 ("cpufreq: schedutil: Use kobject release() method to free sugov_tunables")
Cc: 4.7+ <stable@vger.kernel.org> # 4.7+
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit e5c6b312 ]

The struct sugov_tunables is protected by the kobject, so we can't free
it directly. Otherwise we would get a call trace like this:
  ODEBUG: free active (active state 0) object type: timer_list hint: delayed_work_timer_fn+0x0/0x30
  WARNING: CPU: 3 PID: 720 at lib/debugobjects.c:505 debug_print_object+0xb8/0x100
  Modules linked in:
  CPU: 3 PID: 720 Comm: a.sh Tainted: G        W         5.14.0-rc1-next-20210715-yocto-standard+ #507
  Hardware name: Marvell OcteonTX CN96XX board (DT)
  pstate: 40400009 (nZcv daif +PAN -UAO -TCO BTYPE=--)
  pc : debug_print_object+0xb8/0x100
  lr : debug_print_object+0xb8/0x100
  sp : ffff80001ecaf910
  x29: ffff80001ecaf910 x28: ffff00011b10b8d0 x27: ffff800011043d80
  x26: ffff00011a8f0000 x25: ffff800013cb3ff0 x24: 0000000000000000
  x23: ffff80001142aa68 x22: ffff800011043d80 x21: ffff00010de46f20
  x20: ffff800013c0c520 x19: ffff800011d8f5b0 x18: 0000000000000010
  x17: 6e6968207473696c x16: 5f72656d6974203a x15: 6570797420746365
  x14: 6a626f2029302065 x13: 303378302f307830 x12: 2b6e665f72656d69
  x11: ffff8000124b1560 x10: ffff800012331520 x9 : ffff8000100ca6b0
  x8 : 000000000017ffe8 x7 : c0000000fffeffff x6 : 0000000000000001
  x5 : ffff800011d8c000 x4 : ffff800011d8c740 x3 : 0000000000000000
  x2 : ffff0001108301c0 x1 : ab3c90eedf9c0f00 x0 : 0000000000000000
  Call trace:
   debug_print_object+0xb8/0x100
   __debug_check_no_obj_freed+0x1c0/0x230
   debug_check_no_obj_freed+0x20/0x88
   slab_free_freelist_hook+0x154/0x1c8
   kfree+0x114/0x5d0
   sugov_exit+0xbc/0xc0
   cpufreq_exit_governor+0x44/0x90
   cpufreq_set_policy+0x268/0x4a8
   store_scaling_governor+0xe0/0x128
   store+0xc0/0xf0
   sysfs_kf_write+0x54/0x80
   kernfs_fop_write_iter+0x128/0x1c0
   new_sync_write+0xf0/0x190
   vfs_write+0x2d4/0x478
   ksys_write+0x74/0x100
   __arm64_sys_write+0x24/0x30
   invoke_syscall.constprop.0+0x54/0xe0
   do_el0_svc+0x64/0x158
   el0_svc+0x2c/0xb0
   el0t_64_sync_handler+0xb0/0xb8
   el0t_64_sync+0x198/0x19c
  irq event stamp: 5518
  hardirqs last  enabled at (5517): [<ffff8000100cbd7c>] console_unlock+0x554/0x6c8
  hardirqs last disabled at (5518): [<ffff800010fc0638>] el1_dbg+0x28/0xa0
  softirqs last  enabled at (5504): [<ffff8000100106e0>] __do_softirq+0x4d0/0x6c0
  softirqs last disabled at (5483): [<ffff800010049548>] irq_exit+0x1b0/0x1b8

So split the original sugov_tunables_free() into two functions,
sugov_clear_global_tunables() is just used to clear the global_tunables
and the new sugov_tunables_free() is used as kobj_type::release to
release the sugov_tunables safely.

Fixes: 9bdcb44e

 ("cpufreq: schedutil: New governor based on scheduler utilization data")
Cc: 4.7+ <stable@vger.kernel.org> # 4.7+
Signed-off-by: Kevin Hao <haokexin@gmail.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 3b0c4061

 ]

This issue happens when a userspace program does an ioctl
FBIOPUT_VSCREENINFO passing the fb_var_screeninfo struct
containing only the fields xres, yres, and bits_per_pixel
with values.

If this struct is the same as the previous ioctl, the
vc_resize() detects it and doesn't call the resize_screen(),
leaving the fb_var_screeninfo incomplete. And this leads to
the updatescrollmode() calculates a wrong value to
fbcon_display->vrows, which makes the real_y() return a
wrong value of y, and that value, eventually, causes
the imageblit to access an out-of-bound address value.

To solve this issue I made the resize_screen() be called
even if the screen does not need any resizing, so it will
"fix and fill" the fb_var_screeninfo independently.

Cc: stable <stable@vger.kernel.org> # after 5.15-rc2 is out, give it time to bake
Reported-and-tested-by:  <syzbot+858dc7a2f7ef07c2c219@syzkaller.appspotmail.com>
Signed-off-by: Igor Matheus Andrade Torrente <igormtorrente@gmail.com>
Link: https://lore.kernel.org/r/20210628134509.15895-1-igormtorrente@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

commit d5f65459 upstream.

In commit b7213ffa

 ("qnx4: avoid stringop-overread errors") I tried
to teach gcc about how the directory entry structure can be two
different things depending on a status flag.  It made the code clearer,
and it seemed to make gcc happy.

However, Arnd points to a gcc bug, where despite using two different
members of a union, gcc then gets confused, and uses the size of one of
the members to decide if a string overrun happens.  And not necessarily
the rigth one.

End result: with some configurations, gcc-11 will still complain about
the source buffer size being overread:

  fs/qnx4/dir.c: In function 'qnx4_readdir':
  fs/qnx4/dir.c:76:32: error: 'strnlen' specified bound [16, 48] exceeds source size 1 [-Werror=stringop-overread]
     76 |                         size = strnlen(name, size);
        |                                ^~~~~~~~~~~~~~~~~~~
  fs/qnx4/dir.c:26:22: note: source object declared here
     26 |                 char de_name;
        |                      ^~~~~~~

because gcc will get confused about which union member entry is actually
getting accessed, even when the source code is very clear about it.  Gcc
internally will have combined two "redundant" pointers (pointing to
different union elements that are at the same offset), and takes the
size checking from one or the other - not necessarily the right one.

This is clearly a gcc bug, but we can work around it fairly easily.  The
biggest thing here is the big honking comment about why we do what we
do.

Link: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=99578#c6
Reported-and-tested-by: Arnd Bergmann <arnd@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 514ef1e6

 upstream.

Current PCIe MEM space of size 16 MB is not enough for some combination
of PCIe cards (e.g. NVMe disk together with ath11k wifi card). ARM Trusted
Firmware for Armada 3700 platform already assigns 128 MB for PCIe window,
so extend PCIe MEM space to the end of 128 MB PCIe window which allows to
allocate more PCIe BARs for more PCIe cards.

Without this change some combination of PCIe cards cannot be used and
kernel show error messages in dmesg during initialization:

    pci 0000:00:00.0: BAR 8: no space for [mem size 0x01800000]
    pci 0000:00:00.0: BAR 8: failed to assign [mem size 0x01800000]
    pci 0000:00:00.0: BAR 6: assigned [mem 0xe8000000-0xe80007ff pref]
    pci 0000:01:00.0: BAR 8: no space for [mem size 0x01800000]
    pci 0000:01:00.0: BAR 8: failed to assign [mem size 0x01800000]
    pci 0000:02:03.0: BAR 8: no space for [mem size 0x01000000]
    pci 0000:02:03.0: BAR 8: failed to assign [mem size 0x01000000]
    pci 0000:02:07.0: BAR 8: no space for [mem size 0x00100000]
    pci 0000:02:07.0: BAR 8: failed to assign [mem size 0x00100000]
    pci 0000:03:00.0: BAR 0: no space for [mem size 0x01000000 64bit]
    pci 0000:03:00.0: BAR 0: failed to assign [mem size 0x01000000 64bit]

Due to bugs in U-Boot port for Turris Mox, the second range in Turris Mox
kernel DTS file for PCIe must start at 16 MB offset. Otherwise U-Boot
crashes during loading of kernel DTB file. This bug is present only in
U-Boot code for Turris Mox and therefore other Armada 3700 devices are not
affected by this bug. Bug is fixed in U-Boot version 2021.07.

To not break booting new kernels on existing versions of U-Boot on Turris
Mox, use first 16 MB range for IO and second range with rest of PCIe window
for MEM.

Signed-off-by: Pali Rohár <pali@kernel.org>
Fixes: 76f6386b

 ("arm64: dts: marvell: Add Aardvark PCIe support for Armada 3700")
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit efafec27

 ]

Without CONFIG_PM enabled, the SET_RUNTIME_PM_OPS() macro ends up being
empty, and the only use of tegra_slink_runtime_{resume,suspend} goes
away, resulting in

  drivers/spi/spi-tegra20-slink.c:1200:12: error: ‘tegra_slink_runtime_resume’ defined but not used [-Werror=unused-function]
   1200 | static int tegra_slink_runtime_resume(struct device *dev)
        |            ^~~~~~~~~~~~~~~~~~~~~~~~~~
  drivers/spi/spi-tegra20-slink.c:1188:12: error: ‘tegra_slink_runtime_suspend’ defined but not used [-Werror=unused-function]
   1188 | static int tegra_slink_runtime_suspend(struct device *dev)
        |            ^~~~~~~~~~~~~~~~~~~~~~~~~~~

mark the functions __maybe_unused to make the build happy.

This hits the alpha allmodconfig build (and others).

Reported-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 3c0d2a46

 ]

tx timeout and slot time are currently specified in units of HZ.  On
Alpha, HZ is defined as 1024.  When building alpha:allmodconfig, this
results in the following error message.

  drivers/net/hamradio/6pack.c: In function 'sixpack_open':
  drivers/net/hamradio/6pack.c:71:41: error:
  	unsigned conversion from 'int' to 'unsigned char'
  	changes value from '256' to '0'

In the 6PACK protocol, tx timeout is specified in units of 10 ms and
transmitted over the wire:

    https://www.linux-ax25.org/wiki/6PACK

Defining a value dependent on HZ doesn't really make sense, and
presumably comes from the (very historical) situation where HZ was
originally 100.

Note that the SIXP_SLOTTIME use explicitly is about 10ms granularity:

        mod_timer(&sp->tx_t, jiffies + ((when + 1) * HZ) / 100);

and the SIXP_TXDELAY walue is sent as a byte over the wire.

Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 35a3f4ef

 ]

Some drivers pass a pointer to volatile data to virt_to_bus() and
virt_to_phys(), and that works fine.  One exception is alpha.  This
results in a number of compile errors such as

  drivers/net/wan/lmc/lmc_main.c: In function 'lmc_softreset':
  drivers/net/wan/lmc/lmc_main.c:1782:50: error:
	passing argument 1 of 'virt_to_bus' discards 'volatile'
	qualifier from pointer target type

  drivers/atm/ambassador.c: In function 'do_loader_command':
  drivers/atm/ambassador.c:1747:58: error:
	passing argument 1 of 'virt_to_bus' discards 'volatile'
	qualifier from pointer target type

Declare the parameter of virt_to_phys and virt_to_bus as pointer to
volatile to fix the problem.

Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 9fcb2e93

 ]

__stack_chk_guard is setup once while init stage and never changed
after that.

Although the modification of this variable at runtime will usually
cause the kernel to crash (so does the attacker), it should be marked
as __ro_after_init, and it should not affect performance if it is
placed in the ro_after_init section.

Signed-off-by: Dan Li <ashimida@linux.alibaba.com>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Link: https://lore.kernel.org/r/1631612642-102881-1-git-send-email-ashimida@linux.alibaba.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 90cc7bed

 ]

Use absolute_pointer() wrapper for PAGE0 to avoid this compiler warning:

  arch/parisc/kernel/setup.c: In function 'start_parisc':
  error: '__builtin_memcmp_eq' specified bound 8 exceeds source size 0

Signed-off-by: Helge Deller <deller@gmx.de>
Co-Developed-by: Guenter Roeck <linux@roeck-us.net>
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit b7213ffa

 ]

The qnx4 directory entries are 64-byte blocks that have different
contents depending on the a status byte that is in the last byte of the
block.

In particular, a directory entry can be either a "link info" entry with
a 48-byte name and pointers to the real inode information, or an "inode
entry" with a smaller 16-byte name and the full inode information.

But the code was written to always just treat the directory name as if
it was part of that "inode entry", and just extend the name to the
longer case if the status byte said it was a link entry.

That work just fine and gives the right results, but now that gcc is
tracking data structure accesses much more, the code can trigger a
compiler error about using up to 48 bytes (the long name) in a structure
that only has that shorter name in it:

   fs/qnx4/dir.c: In function ‘qnx4_readdir’:
   fs/qnx4/dir.c:51:32: error: ‘strnlen’ specified bound 48 exceeds source size 16 [-Werror=stringop-overread]
      51 |                         size = strnlen(de->di_fname, size);
         |                                ^~~~~~~~~~~~~~~~~~~~~~~~~~~
   In file included from fs/qnx4/qnx4.h:3,
                    from fs/qnx4/dir.c:16:
   include/uapi/linux/qnx4_fs.h:45:25: note: source object declared here
      45 |         char            di_fname[QNX4_SHORT_NAME_MAX];
         |                         ^~~~~~~~

which is because the source code doesn't really make this whole "one of
two different types" explicit.

Fix this by introducing a very explicit union of the two types, and
basically explaining to the compiler what is really going on.

Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit fc7c028d

 ]

The sparc mdesc code does pointer games with 'struct mdesc_hdr', but
didn't describe to the compiler how that header is then followed by the
data that the header describes.

As a result, gcc is now unhappy since it does stricter pointer range
tracking, and doesn't understand about how these things work.  This
results in various errors like:

    arch/sparc/kernel/mdesc.c: In function ‘mdesc_node_by_name’:
    arch/sparc/kernel/mdesc.c:647:22: error: ‘strcmp’ reading 1 or more bytes from a region of size 0 [-Werror=stringop-overread]
      647 |                 if (!strcmp(names + ep[ret].name_offset, name))
          |                      ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

which are easily avoided by just describing 'struct mdesc_hdr' better,
and making the node_block() helper function look into that unsized
data[] that follows the header.

This makes the sparc64 build happy again at least for my cross-compiler
version (gcc version 11.2.1).

Link: https://lore.kernel.org/lkml/CAHk-=wi4NW3NC0xWykkw=6LnjQD6D_rtRtxY9g8gQAJXtQMi8A@mail.gmail.com/
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: David S. Miller <davem@davemloft.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit dff2d131

 ]

gcc 11.x reports the following compiler warning/error.

  drivers/net/ethernet/i825xx/82596.c: In function 'i82596_probe':
  arch/m68k/include/asm/string.h:72:25: error:
	'__builtin_memcpy' reading 6 bytes from a region of size 0 [-Werror=stringop-overread]

Use absolute_pointer() to work around the problem.

Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit f6b5f1a5

 ]

absolute_pointer() disassociates a pointer from its originating symbol
type and context. Use it to prevent compiler warnings/errors such as

  drivers/net/ethernet/i825xx/82596.c: In function 'i82596_probe':
  arch/m68k/include/asm/string.h:72:25: error:
	'__builtin_memcpy' reading 6 bytes from a region of size 0 [-Werror=stringop-overread]

Such warnings may be reported by gcc 11.x for string and memory
operations on fixed addresses.

Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit b1a89856

 ]

m68k builds fail widely with errors such as

arch/m68k/include/asm/raw_io.h:20:19: error:
	cast to pointer from integer of different size
arch/m68k/include/asm/raw_io.h:30:32: error:
	cast to pointer from integer of different size [-Werror=int-to-p

On m68k, io functions are defined as macros. The problem is seen if the
macro parameter variable size differs from the size of a pointer. Cast
the parameter of all io macros to unsigned long before casting it to
a pointer to fix the problem.

Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20210907060729.2391992-1-linux@roeck-us.net
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 08dad2f4

 ]

The Synopsys Ethernet IP uses the CSR clock as a base clock for MDC.
The divisor used is set in the MAC_MDIO_Address register field CR
(Clock Rate)

The divisor is there to change the CSR clock into a clock that falls
below the IEEE 802.3 specified max frequency of 2.5MHz.

If the CSR clock is 300MHz, the code falls back to using the reset
value in the MAC_MDIO_Address register, as described in the comment
above this code.

However, 300MHz is actually an allowed value and the proper divider
can be estimated quite easily (it's just 1Hz difference!)

A CSR frequency of 300MHz with the maximum clock rate value of 0x5
(STMMAC_CSR_250_300M, a divisor of 124) gives somewhere around
~2.42MHz which is below the IEEE 802.3 specified maximum.

For the ARTPEC-8 SoC, the CSR clock is this problematic 300MHz,
and unfortunately, the reset-value of the MAC_MDIO_Address CR field
is 0x0.

This leads to a clock rate of zero and a divisor of 42, and gives an
MDC frequency of ~7.14MHz.

Allow CSR clock of 300MHz by making the comparison inclusive.

Signed-off-by: Jesper Nilsson <jesper.nilsson@axis.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 5afedf67 ]

There is an use-after-free problem triggered by following process:

      P1(sda)				P2(sdb)
			echo 0 > /sys/block/sdb/trace/enable
			  blk_trace_remove_queue
			    synchronize_rcu
			    blk_trace_free
			      relay_close
rcu_read_lock
__blk_add_trace
  trace_note_tsk
  (Iterate running_trace_list)
			        relay_close_buf
				  relay_destroy_buf
				    kfree(buf)
    trace_note(sdb's bt)
      relay_reserve
        buf->offset <- nullptr deference (use-after-free) !!!
rcu_read_unlock

[  502.714379] BUG: kernel NULL pointer dereference, address:
0000000000000010
[  502.715260] #PF: supervisor read access in kernel mode
[  502.715903] #PF: error_code(0x0000) - not-present page
[  502.716546] PGD 103984067 P4D 103984067 PUD 17592b067 PMD 0
[  502.717252] Oops: 0000 [#1] SMP
[  502.720308] RIP: 0010:trace_note.isra.0+0x86/0x360
[  502.732872] Call Trace:
[  502.733193]  __blk_add_trace.cold+0x137/0x1a3
[  502.733734]  blk_add_trace_rq+0x7b/0xd0
[  502.734207]  blk_add_trace_rq_issue+0x54/0xa0
[  502.734755]  blk_mq_start_request+0xde/0x1b0
[  502.735287]  scsi_queue_rq+0x528/0x1140
...
[  502.742704]  sg_new_write.isra.0+0x16e/0x3e0
[  502.747501]  sg_ioctl+0x466/0x1100

Reproduce method:
  ioctl(/dev/sda, BLKTRACESETUP, blk_user_trace_setup[buf_size=127])
  ioctl(/dev/sda, BLKTRACESTART)
  ioctl(/dev/sdb, BLKTRACESETUP, blk_user_trace_setup[buf_size=127])
  ioctl(/dev/sdb, BLKTRACESTART)

  echo 0 > /sys/block/sdb/trace/enable &
  // Add delay(mdelay/msleep) before kernel enters blk_trace_free()

  ioctl$SG_IO(/dev/sda, SG_IO, ...)
  // Enters trace_note_tsk() after blk_trace_free() returned
  // Use mdelay in rcu region rather than msleep(which may schedule out)

Remove blk_trace from running_list before calling blk_trace_free() by
sysfs if blk_trace is at Blktrace_running state.

Fixes: c71a8961

 ("blktrace: add ftrace plugin")
Signed-off-by: Zhihao Cheng <chengzhihao1@huawei.com>
Link: https://lore.kernel.org/r/20210923134921.109194-1-chengzhihao1@huawei.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 4e285508 ]

ISCSI_NET_PARAM_IFACE_ENABLE belongs to enum iscsi_net_param instead of
iscsi_iface_param so move it to ISCSI_NET_PARAM. Otherwise, when we call
into the driver, we might not match and return that we don't want attr
visible in sysfs. Found in code review.

Link: https://lore.kernel.org/r/20210901085336.2264295-1-libaokun1@huawei.com
Fixes: e746f345

 ("scsi: iscsi: Fix iface sysfs attr detection")
Reviewed-by: Lee Duncan <lduncan@suse.com>
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit fdbccea4 ]

Driver doesn't support aRFS for encapsulated packets, return early error
in such a case.

Fixes: 1eb8c695

 ("net/mlx4_en: Add accelerated RFS support")
Signed-off-by: Aya Levin <ayal@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

commit e8f69b16 upstream.

If resource allocation and registration fail for a muxed tty device
(e.g. if there are no more minor numbers) the driver should not try to
deregister the never-registered (or already-deregistered) tty.

Fix up the error handling to avoid dereferencing a NULL pointer when
attempting to remove the character device.

Fixes: 72dc1c09

 ("HSO: add option hso driver")
Cc: stable@vger.kernel.org	# 2.6.27
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 74e1eb3b upstream.

Driver's tx_empty callback should signal when the transmit shift register
is empty. So when the last character has been sent.

STAT_TX_FIFO_EMP bit signals only that HW transmit FIFO is empty, which
happens when the last byte is loaded into transmit shift register.

STAT_TX_EMP bit signals when the both HW transmit FIFO and transmit shift
register are empty.

So replace STAT_TX_FIFO_EMP check by STAT_TX_EMP in mvebu_uart_tx_empty()
callback function.

Fixes: 30530791

 ("serial: mvebu-uart: initial support for Armada-3700 serial port")
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Pali Rohár <pali@kernel.org>
Link: https://lore.kernel.org/r/20210911132017.25505-1-pali@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 25a14332 upstream.

There are two bugs:
1) If ida_simple_get() fails then this code calls put_device(carrier)
   but we haven't yet called get_device(carrier) and probably that
   leads to a use after free.
2) After device_initialize() then we need to use put_device() to
   release the bus.  This will free the internal resources tied to the
   device and call mcb_free_bus() which will free the rest.

Fixes: 5d9e2ab9 ("mcb: Implement bus->dev.release callback")
Fixes: 18d28819

 ("mcb: Correctly initialize the bus's device")
Cc: stable@vger.kernel.org
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Johannes Thumshirn <jth@kernel.org>
Link: https://lore.kernel.org/r/32e160cf6864ce77f9d62948338e24db9fd8ead9.1630931319.git.johannes.thumshirn@wdc.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 9e3eed53

 upstream.

Adding support for Foxconn device T99W265 for enumeration with
PID 0xe0db.

usb-devices output for 0xe0db
T:  Bus=04 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 19 Spd=5000 MxCh= 0
D:  Ver= 3.20 Cls=ef(misc ) Sub=02 Prot=01 MxPS= 9 #Cfgs=  1
P:  Vendor=0489 ProdID=e0db Rev=05.04
S:  Manufacturer=Microsoft
S:  Product=Generic Mobile Broadband Adapter
S:  SerialNumber=6c50f452
C:  #Ifs= 5 Cfg#= 1 Atr=a0 MxPwr=896mA
I:  If#=0x0 Alt= 0 #EPs= 1 Cls=02(commc) Sub=0e Prot=00 Driver=cdc_mbim
I:  If#=0x1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim
I:  If#=0x2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option
I:  If#=0x3 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
I:  If#=0x4 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option

if0/1: MBIM, if2:Diag, if3:GNSS, if4: Modem

Signed-off-by: Slark Xiao <slark_xiao@163.com>
Link: https://lore.kernel.org/r/20210917110106.9852-1-slark_xiao@163.com
[ johan: use USB_DEVICE_INTERFACE_CLASS(), amend comment ]
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 1ca200a8

 upstream.

The device ZTE 0x0094 is already on the list.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Fixes: b9e44fe5

 ("USB: option: cleanup zte 3g-dongle's pid in option.c")
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 7bb05713

 upstream.

This patch adds the following Telit LN920 compositions:

0x1060: tty, adb, rmnet, tty, tty, tty, tty
0x1061: tty, adb, mbim, tty, tty, tty, tty
0x1062: rndis, tty, adb, tty, tty, tty, tty
0x1063: tty, adb, ecm, tty, tty, tty, tty

Signed-off-by: Carlo Lobrano <c.lobrano@gmail.com>
Link: https://lore.kernel.org/r/20210903123913.1086513-1-c.lobrano@gmail.com
Reviewed-by: Daniele Palmas <dnlplm@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 211f3237 upstream.

0xac24 device ID is already defined and used via
BANDB_DEVICE_ID_USO9ML2_4.  Remove the duplicate from the list.

Fixes: 27f1281d

 ("USB: serial: Extra device/vendor ID for mos7840 driver")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 92dc0b1f upstream.

User space can hold a tty open indefinitely and tty drivers must not
release the underlying structures until the last user is gone.

Switch to using the tty-port reference counter to manage the life time
of the greybus tty state to avoid use after free after a disconnect.

Fixes: a18e1517

 ("greybus: more uart work")
Cc: stable@vger.kernel.org      # 4.9
Reviewed-by: Alex Elder <elder@linaro.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://lore.kernel.org/r/20210906124538.22358-1-johan@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 3bd18ba7

 upstream.

Add the USB serial device ID for the GW Instek GDM-834x Digital Multimeter.

Signed-off-by: Uwe Brandt <uwe.brandt@gmail.com>
Link: https://lore.kernel.org/r/YUxFl3YUCPGJZd8Y@hovoldconsulting.com
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit b55d37ef

 upstream.

ScanLogic SL11R-IDE with firmware older than 2.6c (the latest one) has
broken tag handling, preventing the device from working at all:
usb 1-1: new full-speed USB device number 2 using uhci_hcd
usb 1-1: New USB device found, idVendor=04ce, idProduct=0002, bcdDevice= 2.60
usb 1-1: New USB device strings: Mfr=1, Product=1, SerialNumber=0
usb 1-1: Product: USB Device
usb 1-1: Manufacturer: USB Device
usb-storage 1-1:1.0: USB Mass Storage device detected
scsi host2: usb-storage 1-1:1.0
usbcore: registered new interface driver usb-storage
usb 1-1: reset full-speed USB device number 2 using uhci_hcd
usb 1-1: reset full-speed USB device number 2 using uhci_hcd
usb 1-1: reset full-speed USB device number 2 using uhci_hcd
usb 1-1: reset full-speed USB device number 2 using uhci_hcd

Add US_FL_BULK_IGNORE_TAG to fix it. Also update my e-mail address.

2.6c is the only firmware that claims Linux compatibility.
The firmware can be upgraded using ezotgdbg utility:
https://github.com/asciilifeform/ezotgdbg

Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Ondrej Zary <linux@zary.sk>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210913210106.12717-1-linux@zary.sk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 0594c581 upstream.

The initial observation was that in PV mode under Xen 32-bit user space
didn't work anymore. Attempts of system calls ended in #GP(0x402). All
of the sudden the vector 0x80 handler was not in place anymore. As it
turns out up to 5.13 redundant initialization did occur: Once from
cpu_initialize_context() (through its VCPUOP_initialise hypercall) and a
2nd time while each CPU was brought fully up. This 2nd initialization is
now gone, uncovering that the 1st one was flawed: Unlike for the
set_trap_table hypercall, a full virtual IDT needs to be specified here;
the "vector" fields of the individual entries are of no interest. With
many (kernel) IDT entries still(?) (i.e. at that point at least) empty,
the syscall vector 0x80 ended up in slot 0x20 of the virtual IDT, thus
becoming the domain's handler for vector 0x20.

Make xen_convert_trap_info() fit for either purpose, leveraging the fact
that on the xen_copy_trap_info() path the table starts out zero-filled.
This includes moving out the writing of the sentinel, which would also
have lead to a buffer overrun in the xen_copy_trap_info() case if all
(kernel) IDT entries were populated. Convert the writing of the sentinel
to clearing of the entire table entry rather than just the address
field.

(I didn't bother trying to identify the commit which uncovered the issue
in 5.14; the commit named below is the one which actually introduced the
bad code.)

Fixes: f87e4cac

 ("xen: SMP guest support")
Cc: stable@vger.kernel.org
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Link: https://lore.kernel.org/r/7a266932-092e-b68f-f2bb-1473b61adc6e@suse.com
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 9ed38fd4

 upstream.

Although very unlikely that the tlink pointer would be null in this case,
get_next_mid function can in theory return null (but not an error)
so need to check for null (not for IS_ERR, which can not be returned
here).

Address warning:

        fs/smbfs_client/connect.c:2392 cifs_match_super()
        warn: 'tlink' isn't an ERR_PTR

Pointed out by Dan Carpenter via smatch code analysis tool

CC: stable@vger.kernel.org
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 517c7bf9 upstream.

This is writing to the first 1 - 3 bytes of "val" and then writing all
four bytes to musb_writel().  The last byte is always going to be
garbage.  Zero out the last bytes instead.

Fixes: 550a7375

 ("USB: Add MUSB and TUSB support")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210916135737.GI25094@kili
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 17956b53 upstream.

This loop is supposed to loop until if reads something other than
CS_IDST or until it times out after 30,000 attempts.  But because of
the || vs && bug, it will never time out and instead it will loop a
minimum of 30,000 times.

This bug is quite old but the code is only used in USB_DEVICE_TEST_MODE
so it probably doesn't affect regular usage.

Fixes: 96fe53ef

 ("usb: gadget: r8a66597-udc: add support for TEST_MODE")
Cc: stable <stable@vger.kernel.org>
Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Acked-by: Felipe Balbi <balbi@kernel.org>
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Link: https://lore.kernel.org/r/20210906094221.GA10957@kili
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>