- Nov 13, 2016
-
-
Lendacky, Thomas authored
Use the phylib support in the kernel to communicate with and control an MDIO attached PHY. Use the hardware's MDIO communication mechanism to communicate with the PHY. Signed-off-by:
Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Lendacky, Thomas authored
Add support for recognizing and using SFP+ modules directly. This includes using the I2C support to read and interpret the information returned from an SFP+ module and configuring things properly. Signed-off-by:
Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Lendacky, Thomas authored
Make phy_aneg_done() available to drivers so that the result of the auto-negotiation initiated by phy_start_aneg() can be determined. Remove the local implementation of phy_aneg_done() from the Aeroflex driver and use the phy library version. Signed-off-by:
Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Lendacky, Thomas authored
Add support to initialize and use the I2C controller within the hardware in order to perform sideband communication, e.g. determine the SFP media type that is installed. Signed-off-by:
Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Lendacky, Thomas authored
Some versions of the amd-xgbe device are capable of reporting ECC error information back to the driver. Add support to process, track and report on this information. Signed-off-by:
Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Lendacky, Thomas authored
The current per channel DMA interrupt support is based on an edge triggered interrupt that is not maskable. This results in having to call the disable_irq/enable_irq functions in order to prevent interrupts during napi processing. The hardware now has a way to configure the per channel DMA interrupt that will allow for masking the interrupt which prevents calling disable_irq/enable_irq now. This patch makes use of this support. Signed-off-by:
Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Lendacky, Thomas authored
Remove the call to netif_get_num_default_rss_queues() and replace it with num_online_cpus() to allow for the possibility of using all of the hardware DMA channels available. Signed-off-by:
Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Lendacky, Thomas authored
Add support for new PCI devices to the driver. Signed-off-by:
Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Lendacky, Thomas authored
Update the reading of the Tx timestamp to account for a hardware issue on how the fields and interrupt are cleared. The "seconds" portion of the timestamp should be read first, followed by the "nanoseconds" portion. Reading the "nanoseconds" portion should clear the timestamp data and the interrupt. Because of an issue with the hardware this order is reversed and reading the "seconds" portion actually clears the timestamp. The code currently follows this workaround, but to guard against future versions where this is fixed add a field to the version data to indicate if the workaround is required or not. Signed-off-by:
Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Lendacky, Thomas authored
Due to a hardware issue, it is possible for interrupt events to be incorrectly generated when performing a soft reset. To guard against this, perform the soft reset twice. Signed-off-by:
Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Jiri Benc says: ==================== openvswitch: support for layer 3 encapsulated packets At the core of this patch set is removing the assumption in Open vSwitch datapath that all packets have Ethernet header. The implementation relies on the presence of pop_eth and push_eth actions in datapath flows to facilitate adding and removing Ethernet headers as appropriate. The construction of such flows is left up to user-space. This series is based on work by Simon Horman, Lorand Jakab, Thomas Morin and others. I kept Lorand's and Simon's s-o-b in the patches that are derived from v11 to record their authorship of parts of the code. Changes from v12 to v13: * Addressed Pravin's feedback. * Removed the GRE vport conversion patch; L3 GRE ports should be created by rtnetlink instead. Main changes from v11 to v12: * The patches were restructured and split differently for easier review. * They were rebased and adjusted to the current net-next. Especially MPLS handling is different (and easier) thanks to the recent MPLS GSO rework. * Several bugs were discovered and fixed. The most notable is fragment handling: header adjustment for ARPHRD_NONE devices on tx needs to be done after refragmentation, not before it. This required significant changes in the patchset. Another one is stricter checking of attributes (match on L2 vs. L3 packet) at the kernel level. * Instead of is_layer3 bool, a mac_proto field is used. ==================== Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Jiri Benc authored
Allow ARPHRD_NONE interfaces to be added to ovs bridge. Based on previous versions by Lorand Jakab and Simon Horman. Signed-off-by:
Lorand Jakab <lojakab@cisco.com> Signed-off-by:
Simon Horman <simon.horman@netronome.com> Signed-off-by:
Jiri Benc <jbenc@redhat.com> Acked-by:
Pravin B Shelar <pshelar@ovn.org> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Jiri Benc authored
It's not allowed to push Ethernet header in front of another Ethernet header. It's not allowed to pop Ethernet header if there's a vlan tag. This preserves the invariant that L3 packet never has a vlan tag. Based on previous versions by Lorand Jakab and Simon Horman. Signed-off-by:
Lorand Jakab <lojakab@cisco.com> Signed-off-by:
Simon Horman <simon.horman@netronome.com> Signed-off-by:
Jiri Benc <jbenc@redhat.com> Acked-by:
Pravin B Shelar <pshelar@ovn.org> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Jiri Benc authored
Extend the ovs flow netlink protocol to support L3 packets. Packets without OVS_KEY_ATTR_ETHERNET attribute specify L3 packets; for those, the OVS_KEY_ATTR_ETHERTYPE attribute is mandatory. Push/pop vlan actions are only supported for Ethernet packets. Based on previous versions by Lorand Jakab and Simon Horman. Signed-off-by:
Lorand Jakab <lojakab@cisco.com> Signed-off-by:
Simon Horman <simon.horman@netronome.com> Signed-off-by:
Jiri Benc <jbenc@redhat.com> Acked-by:
Pravin B Shelar <pshelar@ovn.org> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Jiri Benc authored
Support receiving, extracting flow key and sending of L3 packets (packets without an Ethernet header). Note that even after this patch, non-Ethernet interfaces are still not allowed to be added to bridges. Similarly, netlink interface for sending and receiving L3 packets to/from user space is not in place yet. Based on previous versions by Lorand Jakab and Simon Horman. Signed-off-by:
Lorand Jakab <lojakab@cisco.com> Signed-off-by:
Simon Horman <simon.horman@netronome.com> Signed-off-by:
Jiri Benc <jbenc@redhat.com> Acked-by:
Pravin B Shelar <pshelar@ovn.org> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Jiri Benc authored
Update Ethernet header only if there is one. Signed-off-by:
Jiri Benc <jbenc@redhat.com> Acked-by:
Pravin B Shelar <pshelar@ovn.org> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Jiri Benc authored
We'll need it to alter packets sent to ARPHRD_NONE interfaces. Change do_output() to use the actual L2 header size of the packet when deciding on the minimum cutlen. The assumption here is that what matters is not the output interface hard_header_len but rather the L2 header of the particular packet. For example, ARPHRD_NONE tunnels that encapsulate Ethernet should get at least the Ethernet header. Signed-off-by:
Jiri Benc <jbenc@redhat.com> Acked-by:
Pravin B Shelar <pshelar@ovn.org> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Jiri Benc authored
Use a hole in the structure. We support only Ethernet so far and will add a support for L2-less packets shortly. We could use a bool to indicate whether the Ethernet header is present or not but the approach with the mac_proto field is more generic and occupies the same number of bytes in the struct, while allowing later extensibility. It also makes the code in the next patches more self explaining. It would be nice to use ARPHRD_ constants but those are u16 which would be waste. Thus define our own constants. Another upside of this is that we can overload this new field to also denote whether the flow key is valid. This has the advantage that on refragmentation, we don't have to reparse the packet but can rely on the stored eth.type. This is especially important for the next patches in this series - instead of adding another branch for L2-less packets before calling ovs_fragment, we can just remove all those branches completely. Signed-off-by:
Jiri Benc <jbenc@redhat.com> Acked-by:
Pravin B Shelar <pshelar@ovn.org> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Jiri Benc authored
On tx, use hard_header_len while deciding whether to refragment or drop the packet. That way, all combinations are calculated correctly: * L2 packet going to L2 interface (the L2 header len is subtracted), * L2 packet going to L3 interface (the L2 header is included in the packet lenght), * L3 packet going to L3 interface. Signed-off-by:
Jiri Benc <jbenc@redhat.com> Acked-by:
Pravin B Shelar <pshelar@ovn.org> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Daniel Borkmann authored
Commit 67f8b1dc ("net/mlx4_en: Refactor the XDP forwarding rings scheme") added a bug in that the prog's reference count is not dropped in the error path when mlx4_en_try_alloc_resources() is failing from mlx4_xdp_set(). We previously took bpf_prog_add(prog, priv->rx_ring_num - 1), that we need to release again. Earlier in the call path, dev_change_xdp_fd() itself holds a reference to the prog as well (hence the '- 1' in the bpf_prog_add()), so a simple atomic_sub() is safe to use here. When an error is propagated, then bpf_prog_put() is called eventually from dev_change_xdp_fd() Fixes: 67f8b1dc ("net/mlx4_en: Refactor the XDP forwarding rings scheme") Signed-off-by:
Daniel Borkmann <daniel@iogearbox.net> Acked-by:
Alexei Starovoitov <ast@kernel.org> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Ivan Khoronzhuk authored
While create/destroy channel operation memory is not freed. It was supposed that memory is freed while driver remove. But a channel can be created and destroyed many times while changing number of channels with ethtool. Based on net-next/master Signed-off-by:
Ivan Khoronzhuk <ivan.khoronzhuk@linaro.org> Reviewed-by:
Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
- Nov 11, 2016
-
-
David S. Miller authored
Salil Mehta says: ==================== Bug fixes & Code improvements in HNS driver This patch-set introduces some bug fixes and code improvements. These have been identified during internal review or testing of the driver by internal Hisilicon teams. ==================== Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Kejian Yan authored
This patch adds the support to add or remove the unicast entries to the table and remove from the table. Reported-by:
Daode Huang <huangdaode@hisilicon.com> Signed-off-by:
Kejian Yan <yankejian@huawei.com> Reviewed-by:
Yisen Zhuang <yisen.zhuang@huawei.com> Signed-off-by:
Salil Mehta <salil.mehta@huawei.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Kejian Yan authored
There is no clear operation before add a new multicast tcam table, so the tcam table will be overflow when add more entries. Reported-by:
Daode Huang <huangdaode@hisilicon.com> Signed-off-by:
Kejian Yan <yankejian@huawei.com> Reviewed-by:
Yisen Zhuang <yisen.zhuang@huawei.com> Signed-off-by:
Salil Mehta <salil.mehta@huawei.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Qianqian Xie authored
The packets of wrong mac address(only the last bit is different) can be received in Big-endian by current definition of mask_key. Thus it needs to be modified to support Big-endian and ensure Big-endian normal. Signed-off-by:
Qianqian Xie <xieqianqian@huawei.com> Reviewed-by:
Yisen Zhuang <yisen.zhuang@huawei.com> Signed-off-by:
Salil Mehta <salil.mehta@huawei.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Qianqian Xie authored
The current definition of mac_mc_entry is only suitable for Little-endian. Thus it needs to modify tcam table of mac mc-entry to support both Little-endian and Big-endian. Signed-off-by:
Qianqian Xie <xieqianqian@huawei.com> Reviewed-by:
Yisen Zhuang <yisen.zhuang@huawei.com> Signed-off-by:
Salil Mehta <salil.mehta@huawei.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Qianqian Xie authored
Little-endian is only supported by current tcam table to add or delete mac mc-port. This patch makes it support both Little-endian and Big-endian. Signed-off-by:
Qianqian Xie <xieqianqian@huawei.com> Reviewed-by:
Yisen Zhuang <yisen.zhuang@huawei.com> Signed-off-by:
Salil Mehta <salil.mehta@huawei.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Qianqian Xie authored
Big-endian is not supported by the current definition of table index to get mac entry. It needs to be modified to support both Little-endian and Big-endian. Signed-off-by:
Qianqian Xie <xieqianqian@huawei.com> Reviewed-by:
Yisen Zhuang <yisen.zhuang@huawei.com> Signed-off-by:
Salil Mehta <salil.mehta@huawei.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Qianqian Xie authored
The current definition of mac_uc_entry is only suitable for Little-endian. Thus it needs to modify tcam table of mac uc-entry to support both Little-endian and Big-endian. Signed-off-by:
Qianqian Xie <xieqianqian@huawei.com> Reviewed-by:
Yisen Zhuang <yisen.zhuang@huawei.com> Signed-off-by:
Salil Mehta <salil.mehta@huawei.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Qianqian Xie authored
The current definition of dsaf_drv_tbl_tcam_key is only suitable for Little-endian. If data is stored in Big-endian, this may lead to error in data use. Shift operation can make it work normally in both Big-endian and Little-endian. Signed-off-by:
Qianqian Xie <xieqianqian@huawei.com> Reviewed-by:
Yisen Zhuang <yisen.zhuang@huawei.com> Signed-off-by:
Salil Mehta <salil.mehta@huawei.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Qianqian Xie authored
Hardware ring buffer data is stored in Little-endian. Thus cpu data should be modified to Little-endian. Signed-off-by:
Qianqian Xie <xieqianqian@huawei.com> Reviewed-by:
Yisen Zhuang <yisen.zhuang@huawei.com> Signed-off-by:
Salil Mehta <salil.mehta@huawei.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Daode Huang authored
In current scenario, when the interface is disabled we reset the XGMAC RX/TX functionality. This operation does not affects the PHY layer/SFP and which appears UP to the remote end(this behaviour is unlike GMAC). The result is remote end keeps on sending the packets which gets partly processed by XMAC and dropped. Since these are partly processed these appears as errored packets in the packet counter statistics. This patch fixes this behaviour and adds local-fault and remote-fault functionality which can be used to intimate the remote peer whenever the state of the interface changes. This patch also removes the existing hns_dsaf_xge_core_srst_by_port function which was being used to reset the RX/TX functionality at XGE Core. Reported-by:
Jun He <hjat2005@huawei.com> Signed-off-by:
Daode Huang <huangdaode@hisilicon.com> Reviewed-by:
Yisen Zhuang <yisen.zhuang@huawei.com> Signed-off-by:
Salil Mehta <salil.mehta@huawei.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Qianqian Xie authored
This patch modify the gmac_rx_filt_pkt and gmac_rx_octets_total_filt statistics value. The two statistics is inconsistent with register, and just the opposite. Signed-off-by:
Qianqian Xie <xieqianqian@huawei.com> Signed-off-by:
Jun He <hjat2005@huawei.com> Reviewed-by:
Yisen Zhuang <yisen.zhuang@huawei.com> Signed-off-by:
Salil Mehta <salil.mehta@huawei.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Qianqian Xie authored
This patch deletes redundant macro definitions in hns drivers. And change the .h file containing relation to make the layers more clearly Signed-off-by:
Qianqian Xie <xieqianqian@huawei.com> Signed-off-by:
Weiwei Deng <dengweiwei@huawei.com> Reviewed-by:
Yisen Zhuang <yisen.zhuang@huawei.com> Signed-off-by:
Salil Mehta <salil.mehta@huawei.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Daode Huang authored
When set auto-negotiation off and duplex half, if run "ethtool -r ethX" on port with phy, then the port will be failed to work. It should forbid to start auto-negotiation when auto-negotiate is off. This patch add the limited condition. Reported-by:
Jinchuang Tian <tianjinchuang1@huawei.com> Signed-off-by:
Daode Huang <huangdaode@hisilicon.com> Reviewed-by:
Yisen Zhuang <yisen.zhuang@huawei.com> Reviewed-by:
lipeng <lipeng321@huawei.com> Signed-off-by:
Salil Mehta <salil.mehta@huawei.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Daode Huang authored
The default mac pause time set to 0xff which is too short for pausing, this patch change it to the max value 0xffff. Signed-off-by:
Daode Huang <huangdaode@hisilicon.com> Reviewed-by:
Yisen Zhuang <yisen.zhuang@huawei.com> Reviewed-by:
lipeng <lipeng321@huawei.com> Signed-off-by:
Salil Mehta <salil.mehta@huawei.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Kejian Yan authored
If set promisc mode when there is some traffic, The service nic will cause system halted. We reserve the last 6 tcam entry for the 6 ports. If promisc mode is enabled, we can config the relative tcam as fuzzy matching and set to be valid, or set the tcam to be invalid Signed-off-by:
Kejian Yan <yankejian@huawei.com> Reviewed-by:
Yisen Zhuang <yisen.zhuang@huawei.com> Signed-off-by:
Salil Mehta <salil.mehta@huawei.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Kejian Yan authored
Since there is not enough tcam table entries for vlan and multicast address, HNSv2 needs to add support of fuzzy matching of TCAM tables. To add fuzzy match of TCAM, we Add the property to mask the bits to be fuzzy matched Signed-off-by:
Kejian Yan <yankejian@huawei.com> Reviewed-by:
Yisen Zhuang <yisen.zhuang@huawei.com> Signed-off-by:
Salil Mehta <salil.mehta@huawei.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Kejian Yan authored
Since there is not enough tcam table entries for every vlan and multicast address, HNS needs to add support of fuzzy matching of TCAM tables. Adding the property to mask the bits to be fuzzy matched, so update the bindings document Signed-off-by:
Kejian Yan <yankejian@huawei.com> Reviewed-by:
Yisen Zhuang <yisen.zhuang@huawei.com> Signed-off-by:
Salil Mehta <salil.mehta@huawei.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
- Nov 10, 2016
-
-
Eric Dumazet authored
After commit 6ed46d12 ("sock_diag: align nlattr properly when needed"), tcp_get_info() gets 64bit aligned memory, so we can avoid the unaligned helpers. Suggested-by:
David Miller <davem@davemloft.net> Signed-off-by:
Eric Dumazet <edumazet@google.com> Acked-by:
Soheil Hassas Yeganeh <soheil@google.com> Acked-by:
Yuchung Cheng <ycheng@google.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-