- Aug 18, 2016
-
-
Davidlohr Bueso authored
When wanting to wakeup readers, __rwsem_mark_wakeup() currently iterates the wait_list twice while looking to wakeup the first N queued reader-tasks. While this can be quite inefficient, it was there such that a awoken reader would be first and foremost acknowledged by the lock counter. Keeping the same logic, we can further benefit from the use of wake_qs and avoid entirely the first wait_list iteration that sets the counter as wake_up_process() isn't going to occur right away, and therefore we maintain the counter->list order of going about things. Other than saving cycles with O(n) "scanning", this change also nicely cleans up a good chunk of __rwsem_mark_wakeup(); both visually and less tedious to read. For example, the following improvements where seen on some will it scale microbenchmarks, on a 48-core Haswell: v4.7 v4.7-rwsem-v1 Hmean signal1-processes-8 5792691.42 ( 0.00%) 5771971.04 ( -0.36%) Hmean signal1-processes-12 6081199.96 ( 0.00%) 6072174.38 ( -0.15%) Hmean signal1-processes-21 3071137.71 ( 0.00%) 3041336.72 ( -0.97%) Hmean signal1-processes-48 3712039.98 ( 0.00%) 3708113.59 ( -0.11%) Hmean signal1-processes-79 4464573.45 ( 0.00%) 4682798.66 ( 4.89%) Hmean signal1-processes-110 4486842.01 ( 0.00%) 4633781.71 ( 3.27%) Hmean signal1-processes-141 4611816.83 ( 0.00%) 4692725.38 ( 1.75%) Hmean signal1-processes-172 4638157.05 ( 0.00%) 4714387.86 ( 1.64%) Hmean signal1-processes-203 4465077.80 ( 0.00%) 4690348.07 ( 5.05%) Hmean signal1-processes-224 4410433.74 ( 0.00%) 4687534.43 ( 6.28%) Stddev signal1-processes-8 6360.47 ( 0.00%) 8455.31 ( 32.94%) Stddev signal1-processes-12 4004.98 ( 0.00%) 9156.13 (128.62%) Stddev signal1-processes-21 3273.14 ( 0.00%) 5016.80 ( 53.27%) Stddev signal1-processes-48 28420.25 ( 0.00%) 26576.22 ( -6.49%) Stddev signal1-processes-79 22038.34 ( 0.00%) 18992.70 (-13.82%) Stddev signal1-processes-110 23226.93 ( 0.00%) 17245.79 (-25.75%) Stddev signal1-processes-141 6358.98 ( 0.00%) 7636.14 ( 20.08%) Stddev signal1-processes-172 9523.70 ( 0.00%) 4824.75 (-49.34%) Stddev signal1-processes-203 13915.33 ( 0.00%) 9326.33 (-32.98%) Stddev signal1-processes-224 15573.94 ( 0.00%) 10613.82 (-31.85%) Other runs that saw improvements include context_switch and pipe; and as expected, this is particularly highlighted on larger thread counts as it becomes more expensive to walk the list twice. No change in wakeup ordering or semantics. Signed-off-by:
Davidlohr Bueso <dbueso@suse.de> Signed-off-by:
Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Waiman.Long@hp.com Cc: dave@stgolabs.net Cc: jason.low2@hpe.com Cc: wanpeng.li@hotmail.com Link: http://lkml.kernel.org/r/1470384285-32163-4-git-send-email-dave@stgolabs.net Signed-off-by:
Ingo Molnar <mingo@kernel.org>
-
Davidlohr Bueso authored
Our rwsem code (xadd, at least) is rather well documented, but there are a few really annoying comments in there that serve no purpose and we shouldn't bother with them. Signed-off-by:
Davidlohr Bueso <dbueso@suse.de> Signed-off-by:
Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Waiman.Long@hp.com Cc: dave@stgolabs.net Cc: jason.low2@hpe.com Cc: wanpeng.li@hotmail.com Link: http://lkml.kernel.org/r/1470384285-32163-3-git-send-email-dave@stgolabs.net Signed-off-by:
Ingo Molnar <mingo@kernel.org>
-
Davidlohr Bueso authored
We currently return a rw_semaphore structure, which is the same lock we passed to the function's argument in the first place. While there are several functions that choose this return value, the callers use it, for example, for things like ERR_PTR. This is not the case for __rwsem_mark_wake(), and in addition this function is really about the lock waiters (which we know there are at this point), so its somewhat odd to be returning the sem structure. Signed-off-by:
Davidlohr Bueso <dbueso@suse.de> Signed-off-by:
Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Waiman.Long@hp.com Cc: dave@stgolabs.net Cc: jason.low2@hpe.com Cc: wanpeng.li@hotmail.com Link: http://lkml.kernel.org/r/1470384285-32163-2-git-send-email-dave@stgolabs.net Signed-off-by:
Ingo Molnar <mingo@kernel.org>
-
Peter Zijlstra authored
The current percpu-rwsem read side is entirely free of serializing insns at the cost of having a synchronize_sched() in the write path. The latency of the synchronize_sched() is too high for cgroups. The commit 1ed13287 talks about the write path being a fairly cold path but this is not the case for Android which moves task to the foreground cgroup and back around binder IPC calls from foreground processes to background processes, so it is significantly hotter than human initiated operations. Switch cgroup_threadgroup_rwsem into the slow mode for now to avoid the problem, hopefully it should not be that slow after another commit: 80127a39 ("locking/percpu-rwsem: Optimize readers and reduce global impact"). We could just add rcu_sync_enter() into cgroup_init() but we do not want another synchronize_sched() at boot time, so this patch adds the new helper which doesn't block but currently can only be called before the first use. Reported-by:
John Stultz <john.stultz@linaro.org> Reported-by:
Dmitry Shmidt <dimitrysh@google.com> Signed-off-by:
Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by:
Oleg Nesterov <oleg@redhat.com> Signed-off-by:
Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Colin Cross <ccross@google.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rom Lemarchand <romlem@google.com> Cc: Tejun Heo <tj@kernel.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Todd Kjos <tkjos@google.com> Link: http://lkml.kernel.org/r/20160811165413.GA22807@redhat.com Signed-off-by:
Ingo Molnar <mingo@kernel.org>
-
- Aug 12, 2016
-
-
SeongJae Park authored
This commit adds Korean version of memory-barriers.txt document. The header is referred to HOWTO Korean version. The translation has started from Feb, 2016 and using a public git repository[1] to maintain the work. It's commit history says that it is following upstream changes as well. [1] https://github.com/sjp38/linux.doc_trans_membarrier Signed-off-by:
SeongJae Park <sj38.park@gmail.com> Signed-off-by:
Paul E. McKenney <paulmck@linux.vnet.ibm.com> Reviewed-by:
Byungchul Park <byungchul.park@lge.com> Acked-by:
David Howells <dhowells@redhat.com> Acked-by:
Minchan Kim <minchan@kernel.org> Acked-by:
Jonathan Corbet <corbet@lwn.net> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-arch@vger.kernel.org Cc: will.deacon@arm.com Link: http://lkml.kernel.org/r/1470939463-31950-4-git-send-email-paulmck@linux.vnet.ibm.com Signed-off-by:
Ingo Molnar <mingo@kernel.org>
-
SeongJae Park authored
An example result for data dependent write has a typo. This commit fixes the wrong typo. Signed-off-by:
SeongJae Park <sj38.park@gmail.com> Signed-off-by:
Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: dhowells@redhat.com Cc: linux-arch@vger.kernel.org Cc: will.deacon@arm.com Link: http://lkml.kernel.org/r/1470939463-31950-3-git-send-email-paulmck@linux.vnet.ibm.com Signed-off-by:
Ingo Molnar <mingo@kernel.org>
-
SeongJae Park authored
Signed-off-by:
SeongJae Park <sj38.park@gmail.com> Signed-off-by:
Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: dhowells@redhat.com Cc: linux-arch@vger.kernel.org Cc: will.deacon@arm.com Link: http://lkml.kernel.org/r/1470939463-31950-2-git-send-email-paulmck@linux.vnet.ibm.com Signed-off-by:
Ingo Molnar <mingo@kernel.org>
-
SeongJae Park authored
Signed-off-by:
SeongJae Park <sj38.park@gmail.com> Signed-off-by:
Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: dhowells@redhat.com Cc: linux-arch@vger.kernel.org Cc: will.deacon@arm.com Link: http://lkml.kernel.org/r/1470939463-31950-1-git-send-email-paulmck@linux.vnet.ibm.com Signed-off-by:
Ingo Molnar <mingo@kernel.org>
-
- Aug 10, 2016
-
-
Peter Zijlstra authored
Currently the percpu-rwsem switches to (global) atomic ops while a writer is waiting; which could be quite a while and slows down releasing the readers. This patch cures this problem by ordering the reader-state vs reader-count (see the comments in __percpu_down_read() and percpu_down_write()). This changes a global atomic op into a full memory barrier, which doesn't have the global cacheline contention. This also enables using the percpu-rwsem with rcu_sync disabled in order to bias the implementation differently, reducing the writer latency by adding some cost to readers. Signed-off-by:
Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by:
Oleg Nesterov <oleg@redhat.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Paul McKenney <paulmck@linux.vnet.ibm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-kernel@vger.kernel.org [ Fixed modular build. ] Signed-off-by:
Ingo Molnar <mingo@kernel.org>
-
Waiman Long authored
Currently there are overlap in the pvqspinlock wait_again and spurious_wakeup stat counters. Because of lock stealing, it is no longer possible to accurately determine if spurious wakeup has happened in the queue head. As they track both the queue node and queue head status, it is also hard to tell how many of those comes from the queue head and how many from the queue node. This patch changes the accounting rules so that spurious wakeup is only tracked in the queue node. The wait_again count, however, is only tracked in the queue head when the vCPU failed to acquire the lock after a vCPU kick. This should give a much better indication of the wait-kick dynamics in the queue node and the queue head. Signed-off-by:
Waiman Long <Waiman.Long@hpe.com> Signed-off-by:
Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Boqun Feng <boqun.feng@gmail.com> Cc: Douglas Hatch <doug.hatch@hpe.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Pan Xinhui <xinhui@linux.vnet.ibm.com> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Scott J Norton <scott.norton@hpe.com> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/1464713631-1066-2-git-send-email-Waiman.Long@hpe.com Signed-off-by:
Ingo Molnar <mingo@kernel.org>
-
Peter Zijlstra authored
Restructure pv_queued_spin_steal_lock() as I found it hard to read. Signed-off-by:
Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Waiman Long <waiman.long@hpe.com Cc: linux-kernel@vger.kernel.org Signed-off-by:
Ingo Molnar <mingo@kernel.org>
-
Pan Xinhui authored
It's obviously wrong to set stat to NULL. So lets remove it. Otherwise it is always zero when we check the latency of kick/wake. Signed-off-by:
Pan Xinhui <xinhui.pan@linux.vnet.ibm.com> Signed-off-by:
Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by:
Waiman Long <Waiman.Long@hpe.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/1468405414-3700-1-git-send-email-xinhui.pan@linux.vnet.ibm.com Signed-off-by:
Ingo Molnar <mingo@kernel.org>
-
Wanpeng Li authored
When the lock holder vCPU is racing with the queue head: CPU 0 (lock holder) CPU1 (queue head) =================== ================= spin_lock(); spin_lock(); pv_kick_node(): pv_wait_head_or_lock(): if (!lp) { lp = pv_hash(lock, pn); xchg(&l->locked, _Q_SLOW_VAL); } WRITE_ONCE(pn->state, vcpu_halted); cmpxchg(&pn->state, vcpu_halted, vcpu_hashed); WRITE_ONCE(l->locked, _Q_SLOW_VAL); (void)pv_hash(lock, pn); In this case, lock holder inserts the pv_node of queue head into the hash table and set _Q_SLOW_VAL unnecessary. This patch avoids it by restoring/setting vcpu_hashed state after failing adaptive locking spinning. Signed-off-by:
Wanpeng Li <wanpeng.li@hotmail.com> Signed-off-by:
Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by:
Pan Xinhui <xinhui.pan@linux.vnet.ibm.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Davidlohr Bueso <dave@stgolabs.net> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Waiman Long <Waiman.Long@hpe.com> Link: http://lkml.kernel.org/r/1468484156-4521-1-git-send-email-wanpeng.li@hotmail.com Signed-off-by:
Ingo Molnar <mingo@kernel.org>
-
pan xinhui authored
This patch aims to get rid of endianness in queued_write_unlock(). We want to set __qrwlock->wmode to NULL, however the address is not &lock->cnts in big endian machine. That causes queued_write_unlock() write NULL to the wrong field of __qrwlock. So implement __qrwlock_write_byte() which returns the correct __qrwlock->wmode address. Suggested-by:
Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by:
Pan Xinhui <xinhui.pan@linux.vnet.ibm.com> Signed-off-by:
Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Waiman.Long@hpe.com Cc: arnd@arndb.de Cc: boqun.feng@gmail.com Cc: will.deacon@arm.com Link: http://lkml.kernel.org/r/1468835259-4486-1-git-send-email-xinhui.pan@linux.vnet.ibm.com Signed-off-by: Ingo Molnar ...
-
Ingo Molnar authored
Signed-off-by:
Ingo Molnar <mingo@kernel.org>
-
Linus Torvalds authored
This reverts commit 874f9c7d . Geert Uytterhoeven reports: "This change seems to have an (unintendent?) side-effect. Before, pr_*() calls without a trailing newline characters would be printed with a newline character appended, both on the console and in the output of the dmesg command. After this commit, no new line character is appended, and the output of the next pr_*() call of the same type may be appended, like in: - Truncating RAM at 0x0000000040000000-0x00000000c0000000 to -0x0000000070000000 - Ignoring RAM at 0x0000000200000000-0x0000000240000000 (!CONFIG_HIGHMEM) + Truncating RAM at 0x0000000040000000-0x00000000c0000000 to -0x0000000070000000Ignoring RAM at 0x0000000200000000-0x0000000240000000 (!CONFIG_HIGHMEM)" Joe Perches says: "No, that is not intentional. The newline handling code inside vprintk_emit is a bit involved and for now I suggest a revert until this has all the same behavior as earlier" Reported-by:
Geert Uytterhoeven <geert@linux-m68k.org> Requested-by:
Joe Perches <joe@perches.com> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-traceLinus Torvalds authored
Pull tracing fix from Steven Rostedt: "Fix tick_stop tracepoint symbols for user export. Luiz Capitulino noticed that the tick_stop tracepoint wasn't being parsed properly by the tracing user space tools. This was due to the TRACE_DEFINE_ENUM() being set to a define, when it should have been set to the enum itself. The define was of the MASK that used the BIT to shift. The BIT was the enum and by adding that, everything gets converted nicely. The MASK is still kept just in case it gets converted to an enum in the future" * tag 'trace-v4.8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: tracing: Fix tick_stop tracepoint symbols for user export
-
Linus Torvalds authored
Merge tag 'gcc-plugin-infrastructure-v4.8-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux Pull gcc plugin improvements from Kees Cook: "Several fixes/improvements for the gcc plugin infrastructure: - fix a problem with gcc plugins interfering with cc-option tests. - abort more gracefully when gcc plugin headers or compiler support is missing. - improve the gcc plugin rule generation to be more dynamic, pass arguments, and build from subdirectories" * tag 'gcc-plugin-infrastructure-v4.8-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: gcc-plugins: Add support for plugin subdirectories gcc-plugins: Automate make rule generation gcc-plugins: Add support for passing plugin arguments gcc-plugins: abort builds cleanly when not supported kbuild: no gcc-plugins during cc-option tests
-
Linus Torvalds authored
Merge tag 'platform-drivers-x86-v4.8-3' of git://git.infradead.org/users/dvhart/linux-platform-drivers-x86 Pull x86 platform driver update from Darren Hart: "dell-wmi: ignore battery remove/insert event" * tag 'platform-drivers-x86-v4.8-3' of git://git.infradead.org/users/dvhart/linux-platform-drivers-x86: dell-wmi: Ignore WMI event 0xe00e
-
git://people.freedesktop.org/~airlied/linuxLinus Torvalds authored
Pull drm fixes from Dave Airlie: "This contains a bunch of amdgpu fixes, and some i915 regression fixes. It also contains some fixes for an older regression with some EDID changes and some 6bpc panels. Then there are the lockdep, cirrus and rcar-du regression fixes from this window" * tag 'drm-fixes-for-4.8-rc2' of git://people.freedesktop.org/~airlied/linux: drm/cirrus: Fix NULL pointer dereference when registering the fbdev drm/edid: Set 8 bpc color depth for displays with "DFP 1.x compliant TMDS". drm/i915/dp: Revert "drm/i915/dp: fall back to 18 bpp when sink capability is unknown" drm/edid: Add 6 bpc quirk for display AEO model 0. drm: Paper over locking inversion after registration rework drm: rcar-du: Link HDMI encoder with bridge drm/ttm: Wait for a BO to become idle before unbinding it from GTT drm/i915/fbdev: Check for the framebuffer before use drm/amdgpu: update golden setting of polaris10 drm/amdgpu: update golden setting of stoney drm/amdgpu: update golden setting of polaris11 drm/amdgpu: update golden setting of carrizo drm/amdgpu: update golden setting of iceland drm/amd/amdgpu: change pptable output format from ASCII to binary drm/amdgpu/ci: add mullins to default case for smc ucode drm/amdgpu/gmc7: add missing mullins case drm/i915: Never fully mask the the EI up rps interrupt on SNB/IVB drm/i915: Wait up to 3ms for the pcu to ack the cdclk change request on SKL
-
Brian King authored
Commit b195d5e2 ("ipr: Wait to do async scan until scsi host is initialized") fixed async scan for ipr, but broke sync scan for ipr. This fixes sync scan back up. Signed-off-by:
Brian King <brking@linux.vnet.ibm.com> Reported-and-tested-by:
Michael Ellerman <mpe@ellerman.id.au> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Vladimir Davydov authored
To distinguish non-slab pages charged to kmemcg we mark them PageKmemcg, which sets page->_mapcount to -512. Currently, we set/clear PageKmemcg in __alloc_pages_nodemask()/free_pages_prepare() for any page allocated with __GFP_ACCOUNT, including those that aren't actually charged to any cgroup, i.e. allocated from the root cgroup context. To avoid overhead in case cgroups are not used, we only do that if memcg_kmem_enabled() is true. The latter is set iff there are kmem-enabled memory cgroups (online or offline). The root cgroup is not considered kmem-enabled. As a result, if a page is allocated with __GFP_ACCOUNT for the root cgroup when there are kmem-enabled memory cgroups and is freed after all kmem-enabled memory cgroups were removed, e.g. # no memory cgroups has been created yet, create one mkdir /sys/fs/cgroup/memory/test # run something allocating pages with __GFP_ACCOUNT, e.g. # a program using pipe dmesg | tail # remove the memory cgroup rmdir /sys/fs/cgroup/memory/test we'll get bad page state bug complaining about page->_mapcount != -1: BUG: Bad page state in process swapper/0 pfn:1fd945c page:ffffea007f651700 count:0 mapcount:-511 mapping: (null) index:0x0 flags: 0x1000000000000000() To avoid that, let's mark with PageKmemcg only those pages that are actually charged to and hence pin a non-root memory cgroup. Fixes: 4949148a ("mm: charge/uncharge kmemcg from generic page allocator paths") Reported-and-tested-by:
Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by:
Vladimir Davydov <vdavydov@virtuozzo.com> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
- Aug 09, 2016
-
-
Steven Rostedt (Red Hat) authored
The symbols used in the tick_stop tracepoint were not being converted properly into integers in the trace_stop format file. Instead we had this: print fmt: "success=%d dependency=%s", REC->success, __print_symbolic(REC->dependency, { 0, "NONE" }, { (1 << TICK_DEP_BIT_POSIX_TIMER), "POSIX_TIMER" }, { (1 << TICK_DEP_BIT_PERF_EVENTS), "PERF_EVENTS" }, { (1 << TICK_DEP_BIT_SCHED), "SCHED" }, { (1 << TICK_DEP_BIT_CLOCK_UNSTABLE), "CLOCK_UNSTABLE" }) User space tools have no idea how to parse "TICK_DEP_BIT_SCHED" or the other symbols used to do the bit shifting. The reason is that the conversion was done with using the TICK_DEP_MASK_* symbols which are just macros that convert to the BIT shift itself (with the exception of NONE, which was converted properly, because it doesn't use bits, and is defined as zero). The TICK_DEP_BIT_* needs to be denoted by TRACE_DEFINE_ENUM() in order to have this properly converted for user space tools to parse this event. Cc: stable@vger.kernel.org Cc: Frederic Weisbecker <fweisbec@gmail.com> Fixes: e6e6cc22 ("nohz: Use enum code for tick stop failure tracing message") Reported-by:
Luiz Capitulino <lcapitulino@redhat.com> Tested-by:
Luiz Capitulino <lcapitulino@redhat.com> Signed-off-by:
Steven Rostedt <rostedt@goodmis.org>
-
Boris Brezillon authored
cirrus_modeset_init() is initializing/registering the emulated fbdev and, since commit c61b93fe ("drm/atomic: Fix remaining places where !funcs->best_encoder is valid"), DRM internals can access/test some of the fields in mode_config->funcs as part of the fbdev registration process. Make sure dev->mode_config.funcs is properly set to avoid dereferencing a NULL pointer. Reported-by:
Mike Marshall <hubcap@omnibond.com> Reported-by:
Eric W. Biederman <ebiederm@xmission.com> Signed-off-by:
Boris Brezillon <boris.brezillon@free-electrons.com> Fixes: c61b93fe ("drm/atomic: Fix remaining places where !funcs->best_encoder is valid") Signed-off-by:
Dave Airlie <airlied@redhat.com>
-
Emese Revfy authored
This adds support for building more complex gcc plugins that live in a subdirectory instead of just in a single source file. Reported-by:
PaX Team <pageexec@freemail.hu> Signed-off-by:
Emese Revfy <re.emese@gmail.com> [kees: clarified commit message] Signed-off-by:
Kees Cook <keescook@chromium.org>
-
Emese Revfy authored
There's no reason to repeat the same names in the Makefile when the .so files have already been listed. The .o list can be generated from them. Reported-by:
PaX Team <pageexec@freemail.hu> Signed-off-by:
Emese Revfy <re.emese@gmail.com> [kees: clarified commit message] Signed-off-by:
Kees Cook <keescook@chromium.org>
-
Emese Revfy authored
The latent_entropy plugin needs to pass arguments, so this adds the support. Signed-off-by:
Emese Revfy <re.emese@gmail.com> Signed-off-by:
Kees Cook <keescook@chromium.org>
-
Kees Cook authored
When the compiler doesn't support gcc plugins (either due to missing headers or too old a version), report the problem and abort the build instead of emitting a warning and letting the build founder with arcane compiler errors. Signed-off-by:
Kees Cook <keescook@chromium.org>
-
Emese Revfy authored
The gcc-plugins arguments should not be included when performing cc-option tests. Steps to reproduce: 1) make mrproper 2) make defconfig 3) enable GCC_PLUGINS, GCC_PLUGIN_CYC_COMPLEXITY 4) enable FUNCTION_TRACER (it will select other options as well) 5) make && make modules Build errors: MODPOST 18 modules ERROR: "__fentry__" [net/netfilter/xt_nat.ko] undefined! ERROR: "__fentry__" [net/netfilter/xt_mark.ko] undefined! ERROR: "__fentry__" [net/netfilter/xt_addrtype.ko] undefined! ERROR: "__fentry__" [net/netfilter/xt_LOG.ko] undefined! ERROR: "__fentry__" [net/netfilter/nf_nat_sip.ko] undefined! ERROR: "__fentry__" [net/netfilter/nf_nat_irc.ko] undefined! ERROR: "__fentry__" [net/netfilter/nf_nat_ftp.ko] undefined! ERROR: "__fentry__" [net/netfilter/nf_nat.ko] undefined! Reported-by:
Laura Abbott <labbott@redhat.com> Signed-off-by:
Emese Revfy <re.emese@gmail.com> [kees: renamed variable, clarified commit message] Signed-off-by:
Kees Cook <keescook@chromium.org>
-
Mario Kleiner authored
According to E-EDID spec 1.3, table 3.9, a digital video sink with the "DFP 1.x compliant TMDS" bit set is "signal compatible with VESA DFP 1.x TMDS CRGB, 1 pixel / clock, up to 8 bits / color MSB aligned". For such displays, the DFP spec 1.0, section 3.10 "EDID support" says: "If the DFP monitor only supports EDID 1.X (1.1, 1.2, etc.) without extensions, the host will make the following assumptions: 1. 24-bit MSB-aligned RGB TFT 2. DE polarity is active high 3. H and V syncs are active high 4. Established CRT timings will be used 5. Dithering will not be enabled on the host" So if we don't know the bit depth of the display from additional colorimetry info we should assume 8 bpc / 24 bpp by default. This patch adds info->bpc = 8 assignement for that case. Signed-off-by:
Mario Kleiner <mario.kleiner.de@gmail.com> Cc: Jani Nikula <jani.nikula@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by:
Dave Airlie <airlied@redhat.com>
-
Mario Kleiner authored
This reverts commit 013dd9e0 ("drm/i915/dp: fall back to 18 bpp when sink capability is unknown") This commit introduced a regression into stable kernels, as it reduces output color depth to 6 bpc for any video sink connected to a Displayport connector if that sink doesn't report a specific color depth via EDID, or if our EDID parser doesn't actually recognize the proper bpc from EDID. Affected are active DisplayPort->VGA converters and active DisplayPort->DVI converters. Both should be able to handle 8 bpc, but are degraded to 6 bpc with this patch. The reverted commit was meant to fix Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=105331 A followup patch implements a fix for that specific bug, which is caused by a faulty EDID of the affected DP panel by adding a new EDID quirk for that panel. DP 18 bpp fallback handling and other improvements to DP sink bpc detection will be handled for future kernels in a separate series of patches. Please backport to stable. Signed-off-by:
Mario Kleiner <mario.kleiner.de@gmail.com> Acked-by:
Jani Nikula <jani.nikula@intel.com> Cc: stable@vger.kernel.org Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by:
Dave Airlie <airlied@redhat.com>
-
Mario Kleiner authored
Bugzilla https://bugzilla.kernel.org/show_bug.cgi?id=105331 reports that the "AEO model 0" display is driven with 8 bpc without dithering by default, which looks bad because that panel is apparently a 6 bpc DP panel with faulty EDID. A fix for this was made by commit 013dd9e0 ("drm/i915/dp: fall back to 18 bpp when sink capability is unknown"). That commit triggers new regressions in precision for DP->DVI and DP->VGA displays. A patch is out to revert that commit, but it will revert video output for the AEO model 0 panel to 8 bpc without dithering. The EDID 1.3 of that panel, as decoded from the xrandr output attached to that bugzilla bug report, is somewhat faulty, and beyond other problems also sets the "DFP 1.x compliant TMDS" bit, which according to DFP spec means to drive the panel with 8 bpc and no dithering in absence of other colorimetry information. Try to make the original bug reporter happy despite the faulty EDID by adding a quirk to mark that panel as 6 bpc, so 6 bpc output with dithering creates a nice picture. Tested by injecting the edid from the fdo bug into a DP connector via drm_kms_helper.edid_firmware and verifying the 6 bpc + dithering is selected. This patch should be backported to stable. Signed-off-by:
Mario Kleiner <mario.kleiner.de@gmail.com> Cc: stable@vger.kernel.org Cc: Jani Nikula <jani.nikula@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by:
Dave Airlie <airlied@redhat.com>
-
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linuxLinus Torvalds authored
Pull lkdtm update from Kees Cook: "Fix rebuild problem with LKDTM's rodata test" [ This, and the usercopy branch, both came in before the merge window closed, but ended up in my 'need to look more' queue and thus got merged only after rc1 was out ] * tag 'lkdtm-v4.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: lkdtm: Fix targets for objcopy usage lkdtm: fix false positive warning from -Wmaybe-uninitialized
-
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linuxLinus Torvalds authored
Pull usercopy protection from Kees Cook: "Tbhis implements HARDENED_USERCOPY verification of copy_to_user and copy_from_user bounds checking for most architectures on SLAB and SLUB" * tag 'usercopy-v4.8' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: mm: SLUB hardened usercopy support mm: SLAB hardened usercopy support s390/uaccess: Enable hardened usercopy sparc/uaccess: Enable hardened usercopy powerpc/uaccess: Enable hardened usercopy ia64/uaccess: Enable hardened usercopy arm64/uaccess: Enable hardened usercopy ARM: uaccess: Enable hardened usercopy x86/uaccess: Enable hardened usercopy mm: Hardened usercopy mm: Implement stack frame object validation mm: Add is_migrate_cma_page
-
Linus Torvalds authored
When I initially added the unsafe_[get|put]_user() helpers in commit 5b24a7a2 ("Add 'unsafe' user access functions for batched accesses"), I made the mistake of modeling the interface on our traditional __[get|put]_user() functions, which return zero on success, or -EFAULT on failure. That interface is fairly easy to use, but it's actually fairly nasty for good code generation, since it essentially forces the caller to check the error value for each access. In particular, since the error handling is already internally implemented with an exception handler, and we already use "asm goto" for various other things, we could fairly easily make the error cases just jump directly to an error label instead, and avoid the need for explicit checking after each operation. So switch the interface to pass in an error label, rather than checking the error value in the caller. Best do it now before we start growing more users (the signal handling code in particular would be a good place to use the new interface). So rather than if (unsafe_get_user(x, ptr)) ... handle error .. the interface is now unsafe_get_user(x, ptr, label); where an error during the user mode fetch will now just cause a jump to 'label' in the caller. Right now the actual _implementation_ of this all still ends up being a "if (err) goto label", and does not take advantage of any exception label tricks, but for "unsafe_put_user()" in particular it should be fairly straightforward to convert to using the exception table model. Note that "unsafe_get_user()" is much harder to convert to a clever exception table model, because current versions of gcc do not allow the use of "asm goto" (for the exception) with output values (for the actual value to be fetched). But that is hopefully not a limitation in the long term. [ Also note that it might be a good idea to switch unsafe_get_user() to actually _return_ the value it fetches from user space, but this commit only changes the error handling semantics ] Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Andreas Ziegler authored
In commit 874f9c7d ("printk: create pr_<level> functions"), new pr_level defines were added to printk.c. These new defines are guarded by an #ifdef CONFIG_PRINTK - however, there is already a surrounding #ifdef CONFIG_PRINTK starting a lot earlier in line 249 which means the newly introduced #ifdef is unnecessary. Let's remove it to avoid confusion. Signed-off-by:
Andreas Ziegler <andreas.ziegler@fau.de> Cc: Joe Perches <joe@perches.com> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Pali Rohár authored
WMI event 0xe00e is received when battery was removed or inserted. Signed-off-by:
Pali Rohár <pali.rohar@gmail.com> Signed-off-by:
Darren Hart <dvhart@linux.intel.com>
-
Ville Syrjälä authored
The caller expects %rdi to remain intact, push+pop it make that happen. Fixes the following kind of explosions on my core2duo machine when trying to reboot or shut down: general protection fault: 0000 [#1] PREEMPT SMP Modules linked in: i915 i2c_algo_bit drm_kms_helper cfbfillrect syscopyarea cfbimgblt sysfillrect sysimgblt fb_sys_fops cfbcopyarea drm netconsole configfs binfmt_misc iTCO_wdt psmouse pcspkr snd_hda_codec_idt e100 coretemp hwmon snd_hda_codec_generic i2c_i801 mii i2c_smbus lpc_ich mfd_core snd_hda_intel uhci_hcd snd_hda_codec snd_hwdep snd_hda_core ehci_pci 8250 ehci_hcd snd_pcm 8250_base usbcore evdev serial_core usb_common parport_pc parport snd_timer snd soundcore CPU: 0 PID: 3070 Comm: reboot Not tainted 4.8.0-rc1-perf-dirty #69 Hardware name: /D946GZIS, BIOS TS94610J.86A.0087.2007.1107.1049 11/07/2007 task: ffff88012a0b4080 task.stack: ffff880123850000 RIP: 0010:[<ffffffff81003c92>] [<ffffffff81003c92>] x86_perf_event_update+0x52/0xc0 RSP: 0018:ffff880123853b60 EFLAGS: 00010087 RAX: 0000000000000001 RBX: ffff88012fc0a3c0 RCX: 000000000000001e RDX: 0000000000000000 RSI: 0000000040000000 RDI: ffff88012b014800 RBP: ffff880123853b88 R08: ffffffffffffffff R09: 0000000000000000 R10: ffffea0004a012c0 R11: ffffea0004acedc0 R12: ffffffff80000001 R13: ffff88012b0149c0 R14: ffff88012b014800 R15: 0000000000000018 FS: 00007f8b155cd700(0000) GS:ffff88012fc00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f8b155f5000 CR3: 000000012a2d7000 CR4: 00000000000006f0 Stack: ffff88012fc0a3c0 ffff88012b014800 0000000000000004 0000000000000001 ffff88012fc1b750 ffff880123853bb0 ffffffff81003d59 ffff88012b014800 ffff88012fc0a3c0 ffff88012b014800 ffff880123853bd8 ffffffff81003e13 Call Trace: [<ffffffff81003d59>] x86_pmu_stop+0x59/0xd0 [<ffffffff81003e13>] x86_pmu_del+0x43/0x140 [<ffffffff8111705d>] event_sched_out.isra.105+0xbd/0x260 [<ffffffff8111738d>] __perf_remove_from_context+0x2d/0xb0 [<ffffffff8111745d>] __perf_event_exit_context+0x4d/0x70 [<ffffffff810c8826>] generic_exec_single+0xb6/0x140 [<ffffffff81117410>] ? __perf_remove_from_context+0xb0/0xb0 [<ffffffff81117410>] ? __perf_remove_from_context+0xb0/0xb0 [<ffffffff810c898f>] smp_call_function_single+0xdf/0x140 [<ffffffff81113d27>] perf_event_exit_cpu_context+0x87/0xc0 [<ffffffff81113d73>] perf_reboot+0x13/0x40 [<ffffffff8107578a>] notifier_call_chain+0x4a/0x70 [<ffffffff81075ad7>] __blocking_notifier_call_chain+0x47/0x60 [<ffffffff81075b06>] blocking_notifier_call_chain+0x16/0x20 [<ffffffff81076a1d>] kernel_restart_prepare+0x1d/0x40 [<ffffffff81076ae2>] kernel_restart+0x12/0x60 [<ffffffff81076d56>] SYSC_reboot+0xf6/0x1b0 [<ffffffff811a823c>] ? mntput_no_expire+0x2c/0x1b0 [<ffffffff811a83e4>] ? mntput+0x24/0x40 [<ffffffff811894fc>] ? __fput+0x16c/0x1e0 [<ffffffff811895ae>] ? ____fput+0xe/0x10 [<ffffffff81072fc3>] ? task_work_run+0x83/0xa0 [<ffffffff81001623>] ? exit_to_usermode_loop+0x53/0xc0 [<ffffffff8100105a>] ? trace_hardirqs_on_thunk+0x1a/0x1c [<ffffffff81076e6e>] SyS_reboot+0xe/0x10 [<ffffffff814c4ba5>] entry_SYSCALL_64_fastpath+0x18/0xa3 Code: 7c 4c 8d af c0 01 00 00 49 89 fe eb 10 48 09 c2 4c 89 e0 49 0f b1 55 00 4c 39 e0 74 35 4d 8b a6 c0 01 00 00 41 8b 8e 60 01 00 00 <0f> 33 8b 35 6e 02 8c 00 48 c1 e2 20 85 f6 7e d2 48 89 d3 89 cf RIP [<ffffffff81003c92>] x86_perf_event_update+0x52/0xc0 RSP <ffff880123853b60> ---[ end trace 7ec95181faf211be ]--- note: reboot[3070] exited with preempt_count 2 Cc: Borislav Petkov <bp@suse.de> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Brian Gerst <brgerst@gmail.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@kernel.org> Fixes: f5967101 ("x86/hweight: Get rid of the special calling convention") Signed-off-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
- Aug 08, 2016
-
-
git://people.freedesktop.org/~agd5f/linuxDave Airlie authored
A few fixes for amdgpu and ttm for 4.8 - fix a ttm regression caused by the new pipelining code - fixes for mullins on amdgpu - updated golden settings for amdgpu * 'drm-next-4.8' of git://people.freedesktop.org/~agd5f/linux: drm/ttm: Wait for a BO to become idle before unbinding it from GTT drm/amdgpu: update golden setting of polaris10 drm/amdgpu: update golden setting of stoney drm/amdgpu: update golden setting of polaris11 drm/amdgpu: update golden setting of carrizo drm/amdgpu: update golden setting of iceland drm/amd/amdgpu: change pptable output format from ASCII to binary drm/amdgpu/ci: add mullins to default case for smc ucode drm/amdgpu/gmc7: add missing mullins case
-
Dave Airlie authored
Merge tag 'drm-intel-next-fixes-2016-08-05' of git://anongit.freedesktop.org/drm-intel into drm-next 3 intel fixes. * tag 'drm-intel-next-fixes-2016-08-05' of git://anongit.freedesktop.org/drm-intel: drm/i915/fbdev: Check for the framebuffer before use drm/i915: Never fully mask the the EI up rps interrupt on SNB/IVB drm/i915: Wait up to 3ms for the pcu to ack the cdclk change request on SKL
-