- Aug 26, 2021
-
-
Thomas Gleixner authored
commit da181dc9 upstream. The specification (PCIe r5.0, sec 6.1.4.5) states: For MSI-X, a function is permitted to cache Address and Data values from unmasked MSI-X Table entries. However, anytime software unmasks a currently masked MSI-X Table entry either by clearing its Mask bit or by clearing the Function Mask bit, the function must update any Address or Data values that it cached from that entry. If software changes the Address or Data value of an entry while the entry is unmasked, the result is undefined. The Linux kernel's MSI-X support never enforced that the entry is masked before the entry is modified hence the Fixes tag refers to a commit in: git://git.kernel.org/pub/scm/linux/kernel/git/tglx/history.git Enforce the entry to be masked across the update. There is no point in enforcing this to be handled at all possible call sites as this is just pointless code duplication and the common update function is the obvious place to enforce this. Fixes: f036d4ea5fa7 ("[PATCH] ia32 Message Signalled Interrupt support") Reported-by:
Kevin Tian <kevin.tian@intel.com> Signed-off-by:
Thomas Gleixner <tglx@linutronix.de> Tested-by:
Marc Zyngier <maz@kernel.org> Reviewed-by:
Marc Zyngier <maz@kernel.org> Acked-by:
Bjorn Helgaas <bhelgaas@google.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20210729222542.462096385@linutronix.de Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Thomas Gleixner authored
commit 7d5ec3d3 upstream. When MSI-X is enabled the ordering of calls is: msix_map_region(); msix_setup_entries(); pci_msi_setup_msi_irqs(); msix_program_entries(); This has a few interesting issues: 1) msix_setup_entries() allocates the MSI descriptors and initializes them except for the msi_desc:masked member which is left zero initialized. 2) pci_msi_setup_msi_irqs() allocates the interrupt descriptors and sets up the MSI interrupts which ends up in pci_write_msi_msg() unless the interrupt chip provides its own irq_write_msi_msg() function. 3) msix_program_entries() does not do what the name suggests. It solely updates the entries array (if not NULL) and initializes the masked member for each MSI descriptor by reading the hardware state and then masks the entry. Obviously this has some issues: 1) The uninitialized masked member of msi_desc prevents the enforcement of masking the entry in pci_write_msi_msg() depending on the cached masked bit. Aside of that half initialized data is a NONO in general 2) msix_program_entries() only ensures that the actually allocated entries are masked. This is wrong as experimentation with crash testing and crash kernel kexec has shown. This limited testing unearthed that when the production kernel had more entries in use and unmasked when it crashed and the crash kernel allocated a smaller amount of entries, then a full scan of all entries found unmasked entries which were in use in the production kernel. This is obviously a device or emulation issue as the device reset should mask all MSI-X table entries, but obviously that's just part of the paper specification. Cure this by: 1) Masking all table entries in hardware 2) Initializing msi_desc::masked in msix_setup_entries() 3) Removing the mask dance in msix_program_entries() 4) Renaming msix_program_entries() to msix_update_entries() to reflect the purpose of that function. As the masking of unused entries has never been done the Fixes tag refers to a commit in: git://git.kernel.org/pub/scm/linux/kernel/git/tglx/history.git Fixes: f036d4ea5fa7 ("[PATCH] ia32 Message Signalled Interrupt support") Signed-off-by:
Thomas Gleixner <tglx@linutronix.de> Tested-by:
Marc Zyngier <maz@kernel.org> Reviewed-by:
Marc Zyngier <maz@kernel.org> Acked-by:
Bjorn Helgaas <bhelgaas@google.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20210729222542.403833459@linutronix.de Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Thomas Gleixner authored
commit 77e89afc upstream. Multi-MSI uses a single MSI descriptor and there is a single mask register when the device supports per vector masking. To avoid reading back the mask register the value is cached in the MSI descriptor and updates are done by clearing and setting bits in the cache and writing it to the device. But nothing protects msi_desc::masked and the mask register from being modified concurrently on two different CPUs for two different Linux interrupts which belong to the same multi-MSI descriptor. Add a lock to struct device and protect any operation on the mask and the mask register with it. This makes the update of msi_desc::masked unconditional, but there is no place which requires a modification of the hardware register without updating the masked cache. msi_mask_irq() is now an empty wrapper which will be cleaned up in follow up changes. The problem goes way back to the initial support of multi-MSI, but picking the commit which introduced the mask cache is a valid cut off point (2.6.30). Fixes: f2440d9a ("PCI MSI: Refactor interrupt masking code") Signed-off-by:
Thomas Gleixner <tglx@linutronix.de> Tested-by:
Marc Zyngier <maz@kernel.org> Reviewed-by:
Marc Zyngier <maz@kernel.org> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20210729222542.726833414@linutronix.de Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Thomas Gleixner authored
commit d28d4ad2 upstream. No point in using the raw write function from shutdown. Preparatory change to introduce proper serialization for the msi_desc::masked cache. Signed-off-by:
Thomas Gleixner <tglx@linutronix.de> Tested-by:
Marc Zyngier <maz@kernel.org> Reviewed-by:
Marc Zyngier <maz@kernel.org> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20210729222542.674391354@linutronix.de Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Thomas Gleixner authored
commit 689e6b53 upstream. The comments about preserving the cached state in pci_msi[x]_shutdown() are misleading as the MSI descriptors are freed right after those functions return. So there is nothing to restore. Preparatory change. Signed-off-by:
Thomas Gleixner <tglx@linutronix.de> Tested-by:
Marc Zyngier <maz@kernel.org> Reviewed-by:
Marc Zyngier <maz@kernel.org> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20210729222542.621609423@linutronix.de Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Thomas Gleixner authored
commit 361fd373 upstream. msi_mask_irq() takes a mask and a flags argument. The mask argument is used to mask out bits from the cached mask and the flags argument to set bits. Some places invoke it with a flags argument which sets bits which are not used by the device, i.e. when the device supports up to 8 vectors a full unmask in some places sets the mask to 0xFFFFFF00. While devices probably do not care, it's still bad practice. Fixes: 7ba1930d ("PCI MSI: Unmask MSI if setup failed") Signed-off-by:
Thomas Gleixner <tglx@linutronix.de> Tested-by:
Marc Zyngier <maz@kernel.org> Reviewed-by:
Marc Zyngier <maz@kernel.org> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20210729222542.568173099@linutronix.de Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Thomas Gleixner authored
commit 43855395 upstream. The ordering of MSI-X enable in hardware is dysfunctional: 1) MSI-X is disabled in the control register 2) Various setup functions 3) pci_msi_setup_msi_irqs() is invoked which ends up accessing the MSI-X table entries 4) MSI-X is enabled and masked in the control register with the comment that enabling is required for some hardware to access the MSI-X table Step #4 obviously contradicts #3. The history of this is an issue with the NIU hardware. When #4 was introduced the table access actually happened in msix_program_entries() which was invoked after enabling and masking MSI-X. This was changed in commit d71d6432 ("PCI/MSI: Kill redundant call of irq_set_msi_desc() for MSI-X interrupts") which removed the table write from msix_program_entries(). Interestingly enough nobody noticed and either NIU still works or it did not get any testing with a kernel 3.19 or later. Nevertheless this is inconsistent and there is no reason why MSI-X can't be enabled and masked in the control register early on, i.e. move step #4 above to step #1. This preserves the NIU workaround and has no side effects on other hardware. Fixes: d71d6432 ("PCI/MSI: Kill redundant call of irq_set_msi_desc() for MSI-X interrupts") Signed-off-by:
Thomas Gleixner <tglx@linutronix.de> Tested-by:
Marc Zyngier <maz@kernel.org> Reviewed-by:
Ashok Raj <ashok.raj@intel.com> Reviewed-by:
Marc Zyngier <maz@kernel.org> Acked-by:
Bjorn Helgaas <bhelgaas@google.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20210729222542.344136412@linutronix.de Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Randy Dunlap authored
[ Upstream commit 839ad22f ] Skip (omit) any version string info that is parenthesized. Warning: objdump version 15) is older than 2.19 Warning: Skipping posttest. where 'objdump -v' says: GNU objdump (GNU Binutils; SUSE Linux Enterprise 15) 2.35.1.20201123-7.18 Fixes: 8bee738b ("x86: Fix objdump version check in chkobjdump.awk for different formats.") Signed-off-by:
Randy Dunlap <rdunlap@infradead.org> Signed-off-by:
Thomas Gleixner <tglx@linutronix.de> Reviewed-by:
Masami Hiramatsu <mhiramat@kernel.org> Link: https://lore.kernel.org/r/20210731000146.2720-1-rdunlap@infradead.org Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Maximilian Heyne authored
[ Upstream commit 88ca2521 ] There is a TOCTOU issue in set_evtchn_to_irq. Rows in the evtchn_to_irq mapping are lazily allocated in this function. The check whether the row is already present and the row initialization is not synchronized. Two threads can at the same time allocate a new row for evtchn_to_irq and add the irq mapping to the their newly allocated row. One thread will overwrite what the other has set for evtchn_to_irq[row] and therefore the irq mapping is lost. This will trigger a BUG_ON later in bind_evtchn_to_cpu: INFO: pci 0000:1a:15.4: [1d0f:8061] type 00 class 0x010802 INFO: nvme 0000:1a:12.1: enabling device (0000 -> 0002) INFO: nvme nvme77: 1/0/0 default/read/poll queues CRIT: kernel BUG at drivers/xen/events/events_base.c:427! WARN: invalid opcode: 0000 [#1] SMP NOPTI WARN: Workqueue: nvme-reset-wq nvme_reset_work [nvme] WARN: RIP: e030:bind_evtchn_to_cpu+0xc2/0xd0 WARN: Call Trace: WARN: set_affinity_irq+0x121/0x150 WARN: irq_do_set_affinity+0x37/0xe0 WARN: irq_setup_affinity+0xf6/0x170 WARN: irq_startup+0x64/0xe0 WARN: __setup_irq+0x69e/0x740 WARN: ? request_threaded_irq+0xad/0x160 WARN: request_threaded_irq+0xf5/0x160 WARN: ? nvme_timeout+0x2f0/0x2f0 [nvme] WARN: pci_request_irq+0xa9/0xf0 WARN: ? pci_alloc_irq_vectors_affinity+0xbb/0x130 WARN: queue_request_irq+0x4c/0x70 [nvme] WARN: nvme_reset_work+0x82d/0x1550 [nvme] WARN: ? check_preempt_wakeup+0x14f/0x230 WARN: ? check_preempt_curr+0x29/0x80 WARN: ? nvme_irq_check+0x30/0x30 [nvme] WARN: process_one_work+0x18e/0x3c0 WARN: worker_thread+0x30/0x3a0 WARN: ? process_one_work+0x3c0/0x3c0 WARN: kthread+0x113/0x130 WARN: ? kthread_park+0x90/0x90 WARN: ret_from_fork+0x3a/0x50 This patch sets evtchn_to_irq rows via a cmpxchg operation so that they will be set only once. The row is now cleared before writing it to evtchn_to_irq in order to not create a race once the row is visible for other threads. While at it, do not require the page to be zeroed, because it will be overwritten with -1's in clear_evtchn_to_irq_row anyway. Signed-off-by:
Maximilian Heyne <mheyne@amazon.de> Fixes: d0b075ff ("xen/events: Refactor evtchn_to_irq array to be dynamically allocated") Link: https://lore.kernel.org/r/20210812130930.127134-1-mheyne@amazon.de Reviewed-by:
Boris Ostrovsky <boris.ostrovsky@oracle.com> Signed-off-by:
Boris Ostrovsky <boris.ostrovsky@oracle.com> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Neal Cardwell authored
[ Upstream commit 6de035fe ] Currently if BBR congestion control is initialized after more than 2B packets have been delivered, depending on the phase of the tp->delivered counter the tracking of BBR round trips can get stuck. The bug arises because if tp->delivered is between 2^31 and 2^32 at the time the BBR congestion control module is initialized, then the initialization of bbr->next_rtt_delivered to 0 will cause the logic to believe that the end of the round trip is still billions of packets in the future. More specifically, the following check will fail repeatedly: !before(rs->prior_delivered, bbr->next_rtt_delivered) and thus the connection will take up to 2B packets delivered before that check will pass and the connection will set: bbr->round_start = 1; This could cause many mechanisms in BBR to fail to trigger, for example bbr_check_full_bw_reached() would likely never exit STARTUP. This bug is 5 years old and has not been observed, and as a practical matter this would likely rarely trigger, since it would require transferring at least 2B packets, or likely more than 3 terabytes of data, before switching congestion control algorithms to BBR. This patch is a stable candidate for kernels as far back as v4.9, when tcp_bbr.c was added. Fixes: 0f8782ea ("tcp_bbr: add BBR congestion control") Signed-off-by:
Neal Cardwell <ncardwell@google.com> Reviewed-by:
Yuchung Cheng <ycheng@google.com> Reviewed-by:
Kevin Yang <yyd@google.com> Reviewed-by:
Eric Dumazet <edumazet@google.com> Link: https://lore.kernel.org/r/20210811024056.235161-1-ncardwell@google.com Signed-off-by:
Jakub Kicinski <kuba@kernel.org> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Yang Yingliang authored
[ Upstream commit 519133de ] I got a memleak report: BUG: memory leak unreferenced object 0x607ee521a658 (size 240): comm "syz-executor.0", pid 955, jiffies 4294780569 (age 16.449s) hex dump (first 32 bytes, cpu 1): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: [<00000000d830ea5a>] br_multicast_add_port+0x1c2/0x300 net/bridge/br_multicast.c:1693 [<00000000274d9a71>] new_nbp net/bridge/br_if.c:435 [inline] [<00000000274d9a71>] br_add_if+0x670/0x1740 net/bridge/br_if.c:611 [<0000000012ce888e>] do_set_master net/core/rtnetlink.c:2513 [inline] [<0000000012ce888e>] do_set_master+0x1aa/0x210 net/core/rtnetlink.c:2487 [<0000000099d1cafc>] __rtnl_newlink+0x1095/0x13e0 net/core/rtnetlink.c:3457 [<00000000a01facc0>] rtnl_newlink+0x64/0xa0 net/core/rtnetlink.c:3488 [<00000000acc9186c>] rtnetlink_rcv_msg+0x369/0xa10 net/core/rtnetlink.c:5550 [<00000000d4aabb9c>] netlink_rcv_skb+0x134/0x3d0 net/netlink/af_netlink.c:2504 [<00000000bc2e12a3>] netlink_unicast_kernel net/netlink/af_netlink.c:1314 [inline] [<00000000bc2e12a3>] netlink_unicast+0x4a0/0x6a0 net/netlink/af_netlink.c:1340 [<00000000e4dc2d0e>] netlink_sendmsg+0x789/0xc70 net/netlink/af_netlink.c:1929 [<000000000d22c8b3>] sock_sendmsg_nosec net/socket.c:654 [inline] [<000000000d22c8b3>] sock_sendmsg+0x139/0x170 net/socket.c:674 [<00000000e281417a>] ____sys_sendmsg+0x658/0x7d0 net/socket.c:2350 [<00000000237aa2ab>] ___sys_sendmsg+0xf8/0x170 net/socket.c:2404 [<000000004f2dc381>] __sys_sendmsg+0xd3/0x190 net/socket.c:2433 [<0000000005feca6c>] do_syscall_64+0x37/0x90 arch/x86/entry/common.c:47 [<000000007304477d>] entry_SYSCALL_64_after_hwframe+0x44/0xae On error path of br_add_if(), p->mcast_stats allocated in new_nbp() need be freed, or it will be leaked. Fixes: 1080ab95 ("net: bridge: add support for IGMP/MLD stats and export them via netlink") Reported-by:
Hulk Robot <hulkci@huawei.com> Signed-off-by:
Yang Yingliang <yangyingliang@huawei.com> Acked-by:
Nikolay Aleksandrov <nikolay@nvidia.com> Link: https://lore.kernel.org/r/20210809132023.978546-1-yangyingliang@huawei.com Signed-off-by:
Jakub Kicinski <kuba@kernel.org> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Takeshi Misawa authored
[ Upstream commit 1090340f ] If IEEE-802.15.4-RAW is closed before receive skb, skb is leaked. Fix this, by freeing sk_receive_queue in sk->sk_destruct(). syzbot report: BUG: memory leak unreferenced object 0xffff88810f644600 (size 232): comm "softirq", pid 0, jiffies 4294967032 (age 81.270s) hex dump (first 32 bytes): 10 7d 4b 12 81 88 ff ff 10 7d 4b 12 81 88 ff ff .}K......}K..... 00 00 00 00 00 00 00 00 40 7c 4b 12 81 88 ff ff ........@|K..... backtrace: [<ffffffff83651d4a>] skb_clone+0xaa/0x2b0 net/core/skbuff.c:1496 [<ffffffff83fe1b80>] ieee802154_raw_deliver net/ieee802154/socket.c:369 [inline] [<ffffffff83fe1b80>] ieee802154_rcv+0x100/0x340 net/ieee802154/socket.c:1070 [<ffffffff8367cc7a>] __netif_receive_skb_one_core+0x6a/0xa0 net/core/dev.c:5384 [<ffffffff8367cd07>] __netif_receive_skb+0x27/0xa0 net/core/dev.c:5498 [<ffffffff8367cdd9>] netif_receive_skb_internal net/core/dev.c:5603 [inline] [<ffffffff8367cdd9>] netif_receive_skb+0x59/0x260 net/core/dev.c:5662 [<ffffffff83fe6302>] ieee802154_deliver_skb net/mac802154/rx.c:29 [inline] [<ffffffff83fe6302>] ieee802154_subif_frame net/mac802154/rx.c:102 [inline] [<ffffffff83fe6302>] __ieee802154_rx_handle_packet net/mac802154/rx.c:212 [inline] [<ffffffff83fe6302>] ieee802154_rx+0x612/0x620 net/mac802154/rx.c:284 [<ffffffff83fe59a6>] ieee802154_tasklet_handler+0x86/0xa0 net/mac802154/main.c:35 [<ffffffff81232aab>] tasklet_action_common.constprop.0+0x5b/0x100 kernel/softirq.c:557 [<ffffffff846000bf>] __do_softirq+0xbf/0x2ab kernel/softirq.c:345 [<ffffffff81232f4c>] do_softirq kernel/softirq.c:248 [inline] [<ffffffff81232f4c>] do_softirq+0x5c/0x80 kernel/softirq.c:235 [<ffffffff81232fc1>] __local_bh_enable_ip+0x51/0x60 kernel/softirq.c:198 [<ffffffff8367a9a4>] local_bh_enable include/linux/bottom_half.h:32 [inline] [<ffffffff8367a9a4>] rcu_read_unlock_bh include/linux/rcupdate.h:745 [inline] [<ffffffff8367a9a4>] __dev_queue_xmit+0x7f4/0xf60 net/core/dev.c:4221 [<ffffffff83fe2db4>] raw_sendmsg+0x1f4/0x2b0 net/ieee802154/socket.c:295 [<ffffffff8363af16>] sock_sendmsg_nosec net/socket.c:654 [inline] [<ffffffff8363af16>] sock_sendmsg+0x56/0x80 net/socket.c:674 [<ffffffff8363deec>] __sys_sendto+0x15c/0x200 net/socket.c:1977 [<ffffffff8363dfb6>] __do_sys_sendto net/socket.c:1989 [inline] [<ffffffff8363dfb6>] __se_sys_sendto net/socket.c:1985 [inline] [<ffffffff8363dfb6>] __x64_sys_sendto+0x26/0x30 net/socket.c:1985 Fixes: 9ec76716 ("net: add IEEE 802.15.4 socket family implementation") Reported-and-tested-by:
<syzbot+1f68113fa907bf0695a8@syzkaller.appspotmail.com> Signed-off-by:
Takeshi Misawa <jeliantsurux@gmail.com> Acked-by:
Alexander Aring <aahringo@redhat.com> Link: https://lore.kernel.org/r/20210805075414.GA15796@DESKTOP Signed-off-by:
Stefan Schmidt <stefan@datenfreihafen.org> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Pali Rohár authored
[ Upstream commit 2459dcb9 ] IFLA_IFNAME is nul-term string which means that IFLA_IFNAME buffer can be larger than length of string which contains. Function __rtnl_newlink() generates new own ifname if either IFLA_IFNAME was not specified at all or userspace passed empty nul-term string. It is expected that if userspace does not specify ifname for new ppp netdev then kernel generates one in format "ppp<id>" where id matches to the ppp unit id which can be later obtained by PPPIOCGUNIT ioctl. And it works in this way if IFLA_IFNAME is not specified at all. But it does not work when IFLA_IFNAME is specified with empty string. So fix this logic also for empty IFLA_IFNAME in ppp_nl_newlink() function and correctly generates ifname based on ppp unit identifier if userspace did not provided preferred ifname. Without this patch when IFLA_IFNAME was specified with empty string then kernel created a new ppp interface in format "ppp<id>" but id did not match ppp unit id returned by PPPIOCGUNIT ioctl. In this case id was some number generated by __rtnl_newlink() function. Signed-off-by:
Pali Rohár <pali@kernel.org> Fixes: bb8082f6 ("ppp: build ifname using unit identifier for rtnl based devices") Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Dan Williams authored
commit b93dfa6b upstream. Fix the NFIT parsing code to treat a 0 index in a SPA Range Structure as a special case and not match Region Mapping Structures that use 0 to indicate that they are not mapped. Without this fix some platform BIOS descriptions of "virtual disk" ranges do not result in the pmem driver attaching to the range. Details: In addition to typical persistent memory ranges, the ACPI NFIT may also convey "virtual" ranges. These ranges are indicated by a UUID in the SPA Range Structure of UUID_VOLATILE_VIRTUAL_DISK, UUID_VOLATILE_VIRTUAL_CD, UUID_PERSISTENT_VIRTUAL_DISK, or UUID_PERSISTENT_VIRTUAL_CD. The critical difference between virtual ranges and UUID_PERSISTENT_MEMORY, is that virtual do not support associations with Region Mapping Structures. For this reason the "index" value of virtual SPA Range Structures is allowed to be 0. If a platform BIOS decides to represent NVDIMMs with disconnected "Region Mapping Structures" (range-index == 0), the kernel may falsely associate them with standalone ranges where the "SPA Range Structure Index" is also zero. When this happens the driver may falsely require labels where "virtual disks" are expected to be label-less. I.e. "label-less" is where the namespace-range == region-range and the pmem driver attaches with no user action to create a namespace. Cc: Jacek Zloch <jacek.zloch@intel.com> Cc: Lukasz Sobieraj <lukasz.sobieraj@intel.com> Cc: "Lee, Chun-Yi" <jlee@suse.com> Cc: <stable@vger.kernel.org> Fixes: c2f32acd ("acpi, nfit: treat virtual ramdisk SPA as pmem region") Reported-by:
Krzysztof Rusocki <krzysztof.rusocki@intel.com> Reported-by:
Damian Bassa <damian.bassa@intel.com> Reviewed-by:
Jeff Moyer <jmoyer@redhat.com> Link: https://lore.kernel.org/r/162870796589.2521182.1240403310175570220.stgit@dwillia2-desk3.amr.corp.intel.com Signed-off-by:
Dan Williams <dan.j.williams@intel.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Greg Kroah-Hartman authored
commit 86ff25ed upstream. If an i2c driver happens to not provide the full amount of data that a user asks for, it is possible that some uninitialized data could be sent to userspace. While all in-kernel drivers look to be safe, just be sure by initializing the buffer to zero before it is passed to the i2c driver so that any future drivers will not have this issue. Also properly copy the amount of data recvieved to the userspace buffer, as pointed out by Dan Carpenter. Reported-by:
Eric Dumazet <edumazet@google.com> Cc: stable@vger.kernel.org Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
Wolfram Sang <wsa@kernel.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Takashi Iwai authored
commit 2e6b8363 upstream. PCM buffers might be allocated dynamically when the buffer preallocation failed or a larger buffer is requested, and it's not guaranteed that substream->dma_buffer points to the actually used buffer. The address should be retrieved from runtime->dma_addr, instead of substream->dma_buffer (and shouldn't use virt_to_phys). Also, remove the line overriding runtime->dma_area superfluously, which was already set up at the PCM buffer allocation. Cc: Cezary Rojewski <cezary.rojewski@intel.com> Cc: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Cc: <stable@vger.kernel.org> Signed-off-by:
Takashi Iwai <tiwai@suse.de> Link: https://lore.kernel.org/r/20210728112353.6675-3-tiwai@suse.de Signed-off-by:
Mark Brown <broonie@kernel.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Colin Ian King authored
commit 5afc1540 upstream. Currently the for-loop that scans for the optimial adc_period iterates through all the possible adc_period levels because the exit logic in the loop is inverted. I believe the comparison should be swapped and the continue replaced with a break to exit the loop at the correct point. Addresses-Coverity: ("Continue has no effect") Fixes: e08e19c3 ("iio:adc: add iio driver for Palmas (twl6035/7) gpadc") Signed-off-by:
Colin Ian King <colin.king@canonical.com> Link: https://lore.kernel.org/r/20210730071651.17394-1-colin.king@canonical.com Cc: <stable@vger.kernel.org> Signed-off-by:
Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
- Aug 15, 2021
-
-
Greg Kroah-Hartman authored
Link: https://lore.kernel.org/r/20210813150522.445553924@linuxfoundation.org Tested-by:
Shuah Khan <skhan@linuxfoundation.org> Tested-by:
Linux Kernel Functional Testing <lkft@linaro.org> Tested-by:
Guenter Roeck <linux@roeck-us.net> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Miklos Szeredi authored
commit 427215d8 upstream. Add the following checks from __do_loopback() to clone_private_mount() as well: - verify that the mount is in the current namespace - verify that there are no locked children Reported-by:
Alois Wohlschlager <alois1@gmx-topmail.de> Fixes: c771d683 ("vfs: introduce clone_private_mount()") Cc: <stable@vger.kernel.org> # v3.18 Signed-off-by:
Miklos Szeredi <mszeredi@redhat.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
YueHaibing authored
commit d0d62baa upstream. Printing kernel pointers is discouraged because they might leak kernel memory layout. This fixes smatch warning: drivers/net/ethernet/xilinx/xilinx_emaclite.c:1191 xemaclite_of_probe() warn: argument 4 to %08lX specifier is cast from pointer Signed-off-by:
YueHaibing <yuehaibing@huawei.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
Pavel Machek (CIP) <pavel@denx.de> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Pali Rohár authored
commit 3125f26c upstream. When registering new ppp interface via PPPIOCNEWUNIT ioctl then kernel has to choose interface name as this ioctl API does not support specifying it. Kernel in this case register new interface with name "ppp<id>" where <id> is the ppp unit id, which can be obtained via PPPIOCGUNIT ioctl. This applies also in the case when registering new ppp interface via rtnl without supplying IFLA_IFNAME. PPPIOCNEWUNIT ioctl allows to specify own ppp unit id which will kernel assign to ppp interface, in case this ppp id is not already used by other ppp interface. In case user does not specify ppp unit id then kernel choose the first free ppp unit id. This applies also for case when creating ppp interface via rtnl method as it does not provide a way for specifying own ppp unit id. If some network interface (does not have to be ppp) has name "ppp<id>" with this first free ppp id then PPPIOCNEWUNIT ioctl or rtnl call fails. And registering new ppp interface is not possible anymore, until interface which holds conflicting name is renamed. Or when using rtnl method with custom interface name in IFLA_IFNAME. As list of allocated / used ppp unit ids is not possible to retrieve from kernel to userspace, userspace has no idea what happens nor which interface is doing this conflict. So change the algorithm how ppp unit id is generated. And choose the first number which is not neither used as ppp unit id nor in some network interface with pattern "ppp<id>". This issue can be simply reproduced by following pppd call when there is no ppp interface registered and also no interface with name pattern "ppp<id>": pppd ifname ppp1 +ipv6 noip noauth nolock local nodetach pty "pppd +ipv6 noip noauth nolock local nodetach notty" Or by creating the one ppp interface (which gets assigned ppp unit id 0), renaming it to "ppp1" and then trying to create a new ppp interface (which will always fails as next free ppp unit id is 1, but network interface with name "ppp1" exists). This patch fixes above described issue by generating new and new ppp unit id until some non-conflicting id with network interfaces is generated. Signed-off-by:
Pali Rohár <pali@kernel.org> Cc: stable@vger.kernel.org Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Longfang Liu authored
commit 26b75952 upstream. Kunpeng920's EHCI controller does not have SBRN register. Reading the SBRN register when the controller driver is initialized will get 0. When rebooting the EHCI driver, ehci_shutdown() will be called. if the sbrn flag is 0, ehci_shutdown() will return directly. The sbrn flag being 0 will cause the EHCI interrupt signal to not be turned off after reboot. this interrupt that is not closed will cause an exception to the device sharing the interrupt. Therefore, the EHCI controller of Kunpeng920 needs to skip the read operation of the SBRN register. Acked-by:
Alan Stern <stern@rowland.harvard.edu> Signed-off-by:
Longfang Liu <liulongfang@huawei.com> Link: https://lore.kernel.org/r/1617958081-17999-1-git-send-email-liulongfang@huawei.com Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Letu Ren authored
[ Upstream commit 92766c46 ] When calling the 'ql_wait_for_drvr_lock' and 'ql_adapter_reset', the driver has already acquired the spin lock, so the driver should not call 'ssleep' in atomic context. This bug can be fixed by using 'mdelay' instead of 'ssleep'. Reported-by:
Letu Ren <fantasquex@gmail.com> Signed-off-by:
Letu Ren <fantasquex@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Prarit Bhargava authored
[ Upstream commit caace6ca ] This issue was noticed while debugging a shutdown issue where some secondary CPUs are not being shutdown correctly. A fix for that [1] requires that secondary cpus be offlined using the cpu_online_mask so that the stop operation is a no-op if CPU HOTPLUG is disabled. I, like the author in [1] looked at the architectures and found that alpha is one of two architectures that executes smp_send_stop() on all possible CPUs. On alpha, smp_send_stop() sends an IPI to all possible CPUs but only needs to send them to online CPUs. Send the stop IPI to only the online CPUs. [1] https://lkml.org/lkml/2020/1/10/250 Signed-off-by:
Prarit Bhargava <prarit@redhat.com> Cc: Richard Henderson <rth@twiddle.net> Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Signed-off-by:
Matt Turner <mattst88@gmail.com> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Shreyansh Chouhan authored
[ Upstream commit 13d25750 ] While verifying the leaf item that we read from the disk, reiserfs doesn't check the directory items, this could cause a crash when we read a directory item from the disk that has an invalid deh_location. This patch adds a check to the directory items read from the disk that does a bounds check on deh_location for the directory entries. Any directory entry header with a directory entry offset greater than the item length is considered invalid. Link: https://lore.kernel.org/r/20210709152929.766363-1-chouhan.shreyansh630@gmail.com Reported-by:
<syzbot+c31a48e6702ccb3d64c9@syzkaller.appspotmail.com> Signed-off-by:
Shreyansh Chouhan <chouhan.shreyansh630@gmail.com> Signed-off-by:
Jan Kara <jack@suse.cz> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Yu Kuai authored
[ Upstream commit 2acf15b9 ] Our syzcaller report a NULL pointer dereference: BUG: kernel NULL pointer dereference, address: 0000000000000000 PGD 116e95067 P4D 116e95067 PUD 1080b5067 PMD 0 Oops: 0010 [#1] SMP KASAN CPU: 7 PID: 592 Comm: a.out Not tainted 5.13.0-next-20210629-dirty #67 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS ?-20190727_073836-buildvm-p4 RIP: 0010:0x0 Code: Unable to access opcode bytes at RIP 0xffffffffffffffd6. RSP: 0018:ffff888114e779b8 EFLAGS: 00010246 RAX: 0000000000000000 RBX: 1ffff110229cef39 RCX: ffffffffaa67e1aa RDX: 0000000000000000 RSI: ffff88810a58ee00 RDI: ffff8881233180b0 RBP: ffffffffac38e9c0 R08: ffffffffaa67e17e R09: 0000000000000001 R10: ffffffffb91c5557 R11: fffffbfff7238aaa R12: ffff88810a58ee00 R13: ffff888114e77aa0 R14: 0000000000000000 R15: ffff8881233180b0 FS: 00007f946163c480(0000) GS:ffff88839f1c0000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: ffffffffffffffd6 CR3: 00000001099c1000 CR4: 00000000000006e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: __lookup_slow+0x116/0x2d0 ? page_put_link+0x120/0x120 ? __d_lookup+0xfc/0x320 ? d_lookup+0x49/0x90 lookup_one_len+0x13c/0x170 ? __lookup_slow+0x2d0/0x2d0 ? reiserfs_schedule_old_flush+0x31/0x130 reiserfs_lookup_privroot+0x64/0x150 reiserfs_fill_super+0x158c/0x1b90 ? finish_unfinished+0xb10/0xb10 ? bprintf+0xe0/0xe0 ? __mutex_lock_slowpath+0x30/0x30 ? __kasan_check_write+0x20/0x30 ? up_write+0x51/0xb0 ? set_blocksize+0x9f/0x1f0 mount_bdev+0x27c/0x2d0 ? finish_unfinished+0xb10/0xb10 ? reiserfs_kill_sb+0x120/0x120 get_super_block+0x19/0x30 legacy_get_tree+0x76/0xf0 vfs_get_tree+0x49/0x160 ? capable+0x1d/0x30 path_mount+0xacc/0x1380 ? putname+0x97/0xd0 ? finish_automount+0x450/0x450 ? kmem_cache_free+0xf8/0x5a0 ? putname+0x97/0xd0 do_mount+0xe2/0x110 ? path_mount+0x1380/0x1380 ? copy_mount_options+0x69/0x140 __x64_sys_mount+0xf0/0x190 do_syscall_64+0x35/0x80 entry_SYSCALL_64_after_hwframe+0x44/0xae This is because 'root_inode' is initialized with wrong mode, and it's i_op is set to 'reiserfs_special_inode_operations'. Thus add check for 'root_inode' to fix the problem. Link: https://lore.kernel.org/r/20210702040743.1918552-1-yukuai3@huawei.com Signed-off-by:
Yu Kuai <yukuai3@huawei.com> Signed-off-by:
Jan Kara <jack@suse.cz> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Like Xu authored
commit df51fe7e upstream. If we use "perf record" in an AMD Milan guest, dmesg reports a #GP warning from an unchecked MSR access error on MSR_F15H_PERF_CTLx: [] unchecked MSR access error: WRMSR to 0xc0010200 (tried to write 0x0000020000110076) at rIP: 0xffffffff8106ddb4 (native_write_msr+0x4/0x20) [] Call Trace: [] amd_pmu_disable_event+0x22/0x90 [] x86_pmu_stop+0x4c/0xa0 [] x86_pmu_del+0x3a/0x140 The AMD64_EVENTSEL_HOSTONLY bit is defined and used on the host, while the guest perf driver should avoid such use. Fixes: 1018faa6 ("perf/x86/kvm: Fix Host-Only/Guest-Only counting with SVM disabled") Signed-off-by:
Like Xu <likexu@tencent.com> Signed-off-by:
Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by:
Liam Merwick <liam.merwick@oracle.com> Tested-by:
Kim Phillips <kim.phillips@amd.com> Tested-by:
Liam Merwick <liam.merwick@oracle.com> Link: https://lkml.kernel.org/r/20210802070850.35295-1-likexu@tencent.com Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Zheyu Ma authored
commit e39cdacf upstream. During the driver loading process, the 'dev' field was not assigned, but the 'dev' field was referenced in the subsequent 'i82092aa_set_mem_map' function. Signed-off-by:
Zheyu Ma <zheyuma97@gmail.com> CC: <stable@vger.kernel.org> [linux@dominikbrodowski.net: shorten commit message, add Cc to stable] Signed-off-by:
Dominik Brodowski <linux@dominikbrodowski.net> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Maciej W. Rozycki authored
commit 9a936d6c upstream. Correct big-endian accesses to the CBUS UART, a Malta on-board discrete TI16C550C part wired directly to the system controller's device bus, and do not use byte swapping with the 32-bit accesses to the device. The CBUS is used for devices such as the boot flash memory needed early on in system bootstrap even before PCI has been initialised. Therefore it uses the system controller's device bus, which follows the endianness set with the CPU, which means no byte-swapping is ever required for data accesses to CBUS, unlike with PCI. The CBUS UART uses the UPIO_MEM32 access method, that is the `readl' and `writel' MMIO accessors, which on the MIPS platform imply byte-swapping with PCI systems. Consequently the wrong byte lane is accessed with the big-endian configuration and the UART is not correctly accessed. As it happens the UPIO_MEM32BE access method makes use of the `ioread32' and `iowrite32' MMIO accessors, which still use `readl' and `writel' respectively, however they byte-swap data passed, effectively cancelling swapping done with the accessors themselves and making it suitable for the CBUS UART. Make the CBUS UART switch between UPIO_MEM32 and UPIO_MEM32BE then, based on the endianness selected. With this change in place the device is correctly recognised with big-endian Malta at boot, along with the Super I/O devices behind PCI: Serial: 8250/16550 driver, 5 ports, IRQ sharing enabled printk: console [ttyS0] disabled serial8250.0: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A printk: console [ttyS0] enabled printk: bootconsole [uart8250] disabled serial8250.0: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A serial8250.0: ttyS2 at MMIO 0x1f000900 (irq = 20, base_baud = 230400) is a 16550A Fixes: e7c4782f ("[MIPS] Put an end to <asm/serial.h>'s long and annyoing existence") Cc: stable@vger.kernel.org # v2.6.23+ Reviewed-by:
Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by:
Maciej W. Rozycki <macro@orcam.me.uk> Link: https://lore.kernel.org/r/alpine.DEB.2.21.2106260524430.37803@angie.orcam.me.uk Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Maciej W. Rozycki authored
commit e5227c51 upstream. Make sure only actual 8 bits of the IIR register are used in determining the port type in `autoconfig'. The `serial_in' port accessor returns the `unsigned int' type, meaning that with UPIO_AU, UPIO_MEM16, UPIO_MEM32, and UPIO_MEM32BE access types more than 8 bits of data are returned, of which the high order bits will often come from bus lines that are left floating in the data phase. For example with the MIPS Malta board's CBUS UART, where the registers are aligned on 8-byte boundaries and which uses 32-bit accesses, data as follows is returned: YAMON> dump -32 0xbf000900 0x40 BF000900: 1F000942 1F000942 1F000900 1F000900 ...B...B........ BF000910: 1F000901 1F000901 1F000900 1F000900 ................ BF000920: 1F000900 1F000900 1F000960 1F000960 ...........`...` BF000930: 1F000900 1F000900 1F0009FF 1F0009FF ................ YAMON> Evidently high-order 24 bits return values previously driven in the address phase (the 3 highest order address bits used with the command above are masked out in the simple virtual address mapping used here and come out at zeros on the external bus), a common scenario with bus lines left floating, due to bus capacitance. Consequently when the value of IIR, mapped at 0x1f000910, is retrieved in `autoconfig', it comes out at 0x1f0009c1 and when it is right-shifted by 6 and then assigned to 8-bit `scratch' variable, the value calculated is 0x27, not one of 0, 1, 2, 3 expected in port type determination. Fix the issue then, by assigning the value returned from `serial_in' to `scratch' first, which masks out 24 high-order bits retrieved, and only then right-shift the resulting 8-bit data quantity, producing the value of 3 in this case, as expected. Fix the same issue in `serial_dl_read'. The problem first appeared with Linux 2.6.9-rc3 which predates our repo history, but the origin could be identified with the old MIPS/Linux repo also at: <git://git.kernel.org/pub/scm/linux/kernel/git/ralf/linux.git> as commit e0d2356c0777 ("Merge with Linux 2.6.9-rc3."), where code in `serial_in' was updated with this case: + case UPIO_MEM32: + return readl(up->port.membase + offset); + which made it produce results outside the unsigned 8-bit range for the first time, though obviously it is system dependent what actual values appear in the high order bits retrieved and it may well have been zeros in the relevant positions with the system the change originally was intended for. It is at that point that code in `autoconf' should have been updated accordingly, but clearly it was overlooked. Fixes: 1da177e4 ("Linux-2.6.12-rc2") Cc: stable@vger.kernel.org # v2.6.12+ Reviewed-by:
Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by:
Maciej W. Rozycki <macro@orcam.me.uk> Link: https://lore.kernel.org/r/alpine.DEB.2.21.2106260516220.37803@angie.orcam.me.uk Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Alex Xu (Hello71) authored
commit 46c4c9d1 upstream. This program always prints 4096 and hangs before the patch, and always prints 8192 and exits successfully after: int main() { int pipefd[2]; for (int i = 0; i < 1025; i++) if (pipe(pipefd) == -1) return 1; size_t bufsz = fcntl(pipefd[1], F_GETPIPE_SZ); printf("%zd\n", bufsz); char *buf = calloc(bufsz, 1); write(pipefd[1], buf, bufsz); read(pipefd[0], buf, bufsz-1); write(pipefd[1], buf, 1); } Note that you may need to increase your RLIMIT_NOFILE before running the program. Fixes: 759c0114 ("pipe: limit the per-user amount of pages allocated in pipes") Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/lkml/1628086770.5rn8p04n6j.none@localhost/ Link: https://lore.kernel.org/lkml/1628127094.lxxn016tj7.none@localhost/ Signed-off-by:
Alex Xu (Hello71) <alex_y_xu@yahoo.ca> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Johan Hovold authored
commit 76f22c93 upstream. The direction of the pipe argument must match the request-type direction bit or control requests may fail depending on the host-controller-driver implementation. Control transfers without a data stage are treated as OUT requests by the USB stack and should be using usb_sndctrlpipe(). Failing to do so will now trigger a warning. The driver uses a zero-length i2c-read request for type detection so update the control-request code to use usb_sndctrlpipe() in this case. Note that actually trying to read the i2c register in question does not work as the register might not exist (e.g. depending on the demodulator) as reported by Eero Lehtinen <debiangamer2@gmail.com>. Reported-by:
<syzbot+faf11bbadc5a372564da@syzkaller.appspotmail.com> Reported-by:
Eero Lehtinen <debiangamer2@gmail.com> Tested-by:
Eero Lehtinen <debiangamer2@gmail.com> Fixes: d0f232e8 ("[media] rtl28xxu: add heuristic to detect chip type") Cc: stable@vger.kernel.org # 4.0 Cc: Antti Palosaari <crope@iki.fi> Signed-off-by:
Johan Hovold <johan@kernel.org> Signed-off-by:
Sean Young <sean@mess.org> Signed-off-by:
Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Hui Su authored
commit 1c0cec64 upstream. Since commit 77271ce4 ("tracing: Add irq, preempt-count and need resched info to default trace output"), the default trace output format has been changed to: <idle>-0 [009] d.h. 22420.068695: _raw_spin_lock_irqsave <-hrtimer_interrupt <idle>-0 [000] ..s. 22420.068695: _nohz_idle_balance <-run_rebalance_domains <idle>-0 [011] d.h. 22420.068695: account_process_tick <-update_process_times origin trace output format:(before v3.2.0) # tracer: nop # # TASK-PID CPU# TIMESTAMP FUNCTION # | | | | | migration/0-6 [000] 50.025810: rcu_note_context_switch <-__schedule migration/0-6 [000] 50.025812: trace_rcu_utilization <-rcu_note_context_switch migration/0-6 [000] 50.025813: rcu_sched_qs <-rcu_note_context_switch migration/0-6 [000] 50.025815: rcu_preempt_qs <-rcu_note_context_switch migration/0-6 [000] 50.025817: trace_rcu_utilization <-rcu_note_context_switch migration/0-6 [000] 50.025818: debug_lockdep_rcu_enabled <-__schedule migration/0-6 [000] 50.025820: debug_lockdep_rcu_enabled <-__schedule The draw_functrace.py(introduced in v2.6.28) can't parse the new version format trace_func, So we need modify draw_functrace.py to adapt the new version trace output format. Link: https://lkml.kernel.org/r/20210611022107.608787-1-suhui@zeku.com Cc: stable@vger.kernel.org Fixes: 77271ce4 tracing: Add irq, preempt-count and need resched info to default trace output Signed-off-by:
Hui Su <suhui@zeku.com> Signed-off-by:
Steven Rostedt (VMware) <rostedt@goodmis.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Dmitry Osipenko authored
commit bf88fef0 upstream. The HNP work can be re-scheduled while it's still in-fly. This results in re-initialization of the busy work, resetting the hrtimer's list node of the work and crashing kernel with null dereference within kernel/timer once work's timer is expired. It's very easy to trigger this problem by re-plugging USB cable quickly. Initialize HNP work only once to fix this trouble. Unable to handle kernel NULL pointer dereference at virtual address 00000126) ... PC is at __run_timers.part.0+0x150/0x228 LR is at __next_timer_interrupt+0x51/0x9c ... (__run_timers.part.0) from [<c0187a2b>] (run_timer_softirq+0x2f/0x50) (run_timer_softirq) from [<c01013ad>] (__do_softirq+0xd5/0x2f0) (__do_softirq) from [<c012589b>] (irq_exit+0xab/0xb8) (irq_exit) from [<c0170341>] (handle_domain_irq+0x45/0x60) (handle_domain_irq) from [<c04c4a43>] (gic_handle_irq+0x6b/0x7c) (gic_handle_irq) from [<c0100b65>] (__irq_svc+0x65/0xac) Cc: stable@vger.kernel.org Acked-by:
Peter Chen <peter.chen@kernel.org> Signed-off-by:
Dmitry Osipenko <digetx@gmail.com> Link: https://lore.kernel.org/r/20210717182134.30262-6-digetx@gmail.com Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
David Bauer authored
commit 8da0e55c upstream. The Auto-M3 OP-COM v2 is a OBD diagnostic device using a FTD232 for the USB connection. Signed-off-by:
David Bauer <mail@david-bauer.net> Cc: stable@vger.kernel.org Signed-off-by:
Johan Hovold <johan@kernel.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Willy Tarreau authored
commit 3c18e9ba upstream. The chip supports high transfer rates, but with the small default buffers (64 bytes read), some entire blocks are regularly lost. This typically happens at 1.5 Mbps (which is the default speed on Rockchip devices) when used as a console to access U-Boot where the output of the "help" command misses many lines and where "printenv" mangles the environment. The FTDI driver doesn't suffer at all from this. One difference is that it uses 512 bytes rx buffers and 256 bytes tx buffers. Adopting these values completely resolved the issue, even the output of "dmesg" is reliable. I preferred to leave the Tx value unchanged as it is not involved in this issue, while a change could increase the risk of triggering the same issue with other devices having too small buffers. I verified that it backports well (and works) at least to 5.4. It's of low importance enough to be dropped where it doesn't trivially apply anymore. Cc: stable@vger.kernel.org Signed-off-by:
Willy Tarreau <w@1wt.eu> Link: https://lore.kernel.org/r/20210724152739.18726-1-w@1wt.eu Signed-off-by:
Johan Hovold <johan@kernel.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Daniele Palmas authored
commit 5648c073 upstream. Add the following Telit FD980 composition 0x1056: Cfg #1: mass storage Cfg #2: rndis, tty, adb, tty, tty, tty, tty Signed-off-by:
Daniele Palmas <dnlplm@gmail.com> Link: https://lore.kernel.org/r/20210803194711.3036-1-dnlplm@gmail.com Cc: stable@vger.kernel.org Signed-off-by:
Johan Hovold <johan@kernel.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Qiang.zhang authored
commit 30fad76c upstream. rcu: INFO: rcu_preempt self-detected stall on CPU rcu: 1-...!: (2 ticks this GP) idle=d92/1/0x4000000000000000 softirq=25390/25392 fqs=3 (t=12164 jiffies g=31645 q=43226) rcu: rcu_preempt kthread starved for 12162 jiffies! g31645 f0x0 RCU_GP_WAIT_FQS(5) ->state=0x0 ->cpu=0 rcu: Unless rcu_preempt kthread gets sufficient CPU time, OOM is now expected behavior. rcu: RCU grace-period kthread stack dump: task:rcu_preempt state:R running task ........... usbtmc 3-1:0.0: unknown status received: -71 usbtmc 3-1:0.0: unknown status received: -71 usbtmc 3-1:0.0: unknown status received: -71 usbtmc 3-1:0.0: unknown status received: -71 usbtmc 3-1:0.0: unknown status received: -71 usbtmc 3-1:0.0: unknown status received: -71 usbtmc 3-1:0.0: unknown status received: -71 usbtmc 3-1:0.0: unknown status received: -71 usbtmc 3-1:0.0: usb_submit_urb failed: -19 The function usbtmc_interrupt() resubmits urbs when the error status of an urb is -EPROTO. In systems using the dummy_hcd usb controller this can result in endless interrupt loops when the usbtmc device is disconnected from the host system. Since host controller drivers already try to recover from transmission errors, there is no need to resubmit the urb or try other solutions to repair the error situation. In case of errors the INT pipe just stops to wait for further packets. Fixes: dbf3e7f6 ("Implement an ioctl to support the USMTMC-USB488 READ_STATUS_BYTE operation") Cc: stable@vger.kernel.org Reported-by:
<syzbot+e2eae5639e7203360018@syzkaller.appspotmail.com> Signed-off-by:
Qiang.zhang <qiang.zhang@windriver.com> Acked-by:
Guido Kiener <guido.kiener@rohde-schwarz.com> Link: https://lore.kernel.org/r/20210723004334.458930-1-qiang.zhang@windriver.com Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Tetsuo Handa authored
[ Upstream commit e0448092 ] syzbot is hitting might_sleep() warning at hci_sock_dev_event() due to calling lock_sock() with rw spinlock held [1]. It seems that history of this locking problem is a trial and error. Commit b40df574 ("[PATCH] bluetooth: fix socket locking in hci_sock_dev_event()") in 2.6.21-rc4 changed bh_lock_sock() to lock_sock() as an attempt to fix lockdep warning. Then, commit 4ce61d1c ("[BLUETOOTH]: Fix locking in hci_sock_dev_event().") in 2.6.22-rc2 changed lock_sock() to local_bh_disable() + bh_lock_sock_nested() as an attempt to fix the sleep in atomic context warning. Then, commit 4b5dd696 ("Bluetooth: Remove local_bh_disable() from hci_sock.c") in 3.3-rc1 removed local_bh_disable(). Then, commit e305509e ("Bluetooth: use correct lock to prevent UAF of hdev object") in 5.13-rc5 again changed bh_lock_sock_nested() to lock_sock() as an attempt to fix CVE-2021-3573. This difficulty comes from current implementation that hci_sock_dev_event(HCI_DEV_UNREG) is responsible for dropping all references from sockets because hci_unregister_dev() immediately reclaims resources as soon as returning from hci_sock_dev_event(HCI_DEV_UNREG). But the history suggests that hci_sock_dev_event(HCI_DEV_UNREG) was not doing what it should do. Therefore, instead of trying to detach sockets from device, let's accept not detaching sockets from device at hci_sock_dev_event(HCI_DEV_UNREG), by moving actual cleanup of resources from hci_unregister_dev() to hci_cleanup_dev() which is called by bt_host_release() when all references to this unregistered device (which is a kobject) are gone. Since hci_sock_dev_event(HCI_DEV_UNREG) no longer resets hci_pi(sk)->hdev, we need to check whether this device was unregistered and return an error based on HCI_UNREGISTER flag. There might be subtle behavioral difference in "monitor the hdev" functionality; please report if you found something went wrong due to this patch. Link: https://syzkaller.appspot.com/bug?extid=a5df189917e79d5e59c9 [1] Reported-by:
syzbot <syzbot+a5df189917e79d5e59c9@syzkaller.appspotmail.com> Suggested-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Fixes: e305509e ("Bluetooth: use correct lock to prevent UAF of hdev object") Acked-by:
Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Pavel Skripkin authored
[ Upstream commit 942e560a ] Smatch says: drivers/net/ethernet/neterion/vxge/vxge-main.c:3518 vxge_device_unregister() error: Using vdev after free_{netdev,candev}(dev); drivers/net/ethernet/neterion/vxge/vxge-main.c:3518 vxge_device_unregister() error: Using vdev after free_{netdev,candev}(dev); drivers/net/ethernet/neterion/vxge/vxge-main.c:3520 vxge_device_unregister() error: Using vdev after free_{netdev,candev}(dev); drivers/net/ethernet/neterion/vxge/vxge-main.c:3520 vxge_device_unregister() error: Using vdev after free_{netdev,candev}(dev); Since vdev pointer is netdev private data accessing it after free_netdev() call can cause use-after-free bug. Fix it by moving free_netdev() call at the end of the function Fixes: 6cca2003 ("vxge: cleanup probe error paths") Reported-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
Pavel Skripkin <paskripkin@gmail.com> Reviewed-by:
Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by:
Jakub Kicinski <kuba@kernel.org> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-