- Feb 24, 2023
-
-
Xin Long authored
With this refcnt added in sctp_stream_priorities, we don't need to traverse all streams to check if the prio is used by other streams when freeing one stream's prio in sctp_sched_prio_free_sid(). This can avoid a nested loop (up to 65535 * 65535), which may cause a stuck as Ying reported: watchdog: BUG: soft lockup - CPU#23 stuck for 26s! [ksoftirqd/23:136] Call Trace: <TASK> sctp_sched_prio_free_sid+0xab/0x100 [sctp] sctp_stream_free_ext+0x64/0xa0 [sctp] sctp_stream_free+0x31/0x50 [sctp] sctp_association_free+0xa5/0x200 [sctp] Note that it doesn't need to use refcount_t type for this counter, as its accessing is always protected under the sock lock. v1->v2: - add a check in sctp_sched_prio_set to avoid the possible prio_head refcnt overflow. Fixes: 9ed7bfc7 ("sctp: fix memory leak in sctp_stream_outq_migrate()") Reported-by:
Ying Xu <yinxu@redhat.com> Acked-by:
Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by:
Xin Long <lucien.xin@gmail.com> Link: https://lore.kernel.org/r/825eb0c905cb864991eba335f4a2b780e543f06b.1677085641.git.lucien.xin@gmail.com Signed-off-by:
Jakub Kicinski <kuba@kernel.org>
-
Sean Anderson authored
devm_request_region is for I/O regions. Use devm_request_mem_region instead. This fixes the driver failing to probe since 99df45c9 ("sunhme: fix an IS_ERR() vs NULL check in probe"), which checked the result. Fixes: 914d9b27 ("sunhme: switch to devres") Signed-off-by:
Sean Anderson <seanga2@gmail.com> Reviewed-by:
Pavan Chebbi <pavan.chebbi@broadcom.com> Link: https://lore.kernel.org/r/20230222204242.2658247-1-seanga2@gmail.com Signed-off-by:
Jakub Kicinski <kuba@kernel.org>
-
- Feb 23, 2023
-
-
Geetha sowjanya authored
When checksum offload is disabled in the driver via ethtool, the PTP 1-step sync packets contain incorrect checksum, since the stack calculates the checksum before driver updates PTP timestamp field in the packet. This results in PTP packets getting dropped at the other end. This patch fixes the issue by re-calculating the UDP checksum after updating PTP timestamp field in the driver. Fixes: 2958d17a ("octeontx2-pf: Add support for ptp 1-step mode on CN10K silicon") Signed-off-by:
Geetha sowjanya <gakula@marvell.com> Signed-off-by:
Hariprasad Kelam <hkelam@marvell.com> Signed-off-by:
Sunil Kovvuri Goutham <sgoutham@marvell.com> Signed-off-by:
Sai Krishna <saikrishnag@marvell.com> Link: https://lore.kernel.org/r/20230222113600.1965116-1-saikrishnag@marvell.com Signed-off-by:
Paolo Abeni <pabeni@redhat.com>
-
Paolo Abeni authored
Oleksij Rempel says: ==================== net: phy: EEE fixes changes v3: - add kernel test robot tags to commit log - reword comment for genphy_c45_an_config_eee_aneg() function changes v2: - restore previous ethtool set logic for the case where advertisements are not provided by user space. - use ethtool_convert_legacy_u32_to_link_mode() where possible - genphy_c45_an_config_eee_aneg(): move adv initialization in to the if scope. Different EEE related fixes. ==================== Link: https://lore.kernel.org/r/20230222055043.113711-1-o.rempel@pengutronix.de Signed-off-by:
Paolo Abeni <pabeni@redhat.com>
-
Oleksij Rempel authored
Currently, it is possible to let some PHYs to advertise not supported EEE link modes. So, validate them before overwriting existing configuration. Signed-off-by:
Oleksij Rempel <o.rempel@pengutronix.de> Reviewed-by:
Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Signed-off-by:
Paolo Abeni <pabeni@redhat.com>
-
Oleksij Rempel authored
With following patches: commit 9b01c885 ("net: phy: c22: migrate to genphy_c45_write_eee_adv()") commit 5827b168 ("net: phy: c45: migrate to genphy_c45_write_eee_adv()") we set the advertisement to potentially supported values. This behavior may introduce new regressions on systems where EEE was disabled by default (BIOS or boot loader configuration or by other ways.) At same time, with this patches, we would overwrite EEE advertisement configuration made over ethtool. To avoid this issues, we need to cache initial and ethtool advertisement configuration and store it for later use. Fixes: 9b01c885 ("net: phy: c22: migrate to genphy_c45_write_eee_adv()") Fixes: 5827b168 ("net: phy: c45: migrate to genphy_c45_write_eee_adv()") Fixes: 022c3f87 ("net: phy: add genphy_c45_ethtool_get/set_eee() support") Signed-off-by:
Oleksij Rempel <o.rempel@pengutronix.de> Reviewed-by:
Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Signed-off-by:
Paolo Abeni <pabeni@redhat.com>
-
Oleksij Rempel authored
Add new genphy_c45_an_config_eee_aneg() function and replace some of genphy_c45_write_eee_adv() calls. This will be needed by the next patch. Signed-off-by:
Oleksij Rempel <o.rempel@pengutronix.de> Reviewed-by:
Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Signed-off-by:
Paolo Abeni <pabeni@redhat.com>
-
Oleksij Rempel authored
Make sure we use proper variable to validate access to potentially not supported registers. Otherwise we will get false read/write errors. Reported-by:
kernel test robot <yujie.liu@intel.com> Link: https://lore.kernel.org/oe-lkp/202302211644.c12d19de-yujie.liu@intel.com Fixes: 022c3f87 ("net: phy: add genphy_c45_ethtool_get/set_eee() support") Signed-off-by:
Oleksij Rempel <o.rempel@pengutronix.de> Reviewed-by:
Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Signed-off-by:
Paolo Abeni <pabeni@redhat.com>
-
Patrisious Haddad authored
During IPsec RoCE TX creation a struct for the flow group creation is allocated, but never freed. Free that struct once it is no longer in use. Fixes: 22551e77 ("net/mlx5: Configure IPsec steering for egress RoCEv2 traffic") Signed-off-by:
Patrisious Haddad <phaddad@nvidia.com> Signed-off-by:
Leon Romanovsky <leonro@nvidia.com> Link: https://lore.kernel.org/r/a69739482cca7176d3a466f87bbf5af1250b09bb.1677056384.git.leon@kernel.org Signed-off-by:
Paolo Abeni <pabeni@redhat.com>
-
Lu Wei authored
Add tests to check whether the total fib info length is calculated corretly in route notify process. Signed-off-by:
Lu Wei <luwei32@huawei.com> Reviewed-by:
David Ahern <dsahern@kernel.org> Link: https://lore.kernel.org/r/20230222083629.335683-3-luwei32@huawei.com Signed-off-by:
Paolo Abeni <pabeni@redhat.com>
-
Lu Wei authored
In function rt6_nlmsg_size(), the length of nexthop is calculated by multipling the nexthop length of fib6_info and the number of siblings. However if the fib6_info has no lwtunnel but the siblings have lwtunnels, the nexthop length is less than it should be, and it will trigger a warning in inet6_rt_notify() as follows: WARNING: CPU: 0 PID: 6082 at net/ipv6/route.c:6180 inet6_rt_notify+0x120/0x130 ...... Call Trace: <TASK> fib6_add_rt2node+0x685/0xa30 fib6_add+0x96/0x1b0 ip6_route_add+0x50/0xd0 inet6_rtm_newroute+0x97/0xa0 rtnetlink_rcv_msg+0x156/0x3d0 netlink_rcv_skb+0x5a/0x110 netlink_unicast+0x246/0x350 netlink_sendmsg+0x250/0x4c0 sock_sendmsg+0x66/0x70 ___sys_sendmsg+0x7c/0xd0 __sys_sendmsg+0x5d/0xb0 do_syscall_64+0x3f/0x90 entry_SYSCALL_64_after_hwframe+0x72/0xdc This bug can be reproduced by script: ip -6 addr add 2002::2/64 dev ens2 ip -6 route add 100::/64 via 2002::1 dev ens2 metric 100 for i in 10 20 30 40 50 60 70; do ip link add link ens2 name ipv_$i type ipvlan ip -6 addr add 2002::$i/64 dev ipv_$i ifconfig ipv_$i up done for i in 10 20 30 40 50 60; do ip -6 route append 100::/64 encap ip6 dst 2002::$i via 2002::1 dev ipv_$i metric 100 done ip -6 route append 100::/64 via 2002::1 dev ipv_70 metric 100 This patch fixes it by adding nexthop_len of every siblings using rt6_nh_nlmsg_size(). Fixes: beb1afac ("net: ipv6: Add support to dump multipath routes via RTA_MULTIPATH attribute") Signed-off-by:
Lu Wei <luwei32@huawei.com> Reviewed-by:
David Ahern <dsahern@kernel.org> Link: https://lore.kernel.org/r/20230222083629.335683-2-luwei32@huawei.com Signed-off-by:
Paolo Abeni <pabeni@redhat.com>
-
git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nfJakub Kicinski authored
Pablo Neira Ayuso says: ==================== Netfilter fixes for net 1) Fix broken listing of set elements when table has an owner. 2) Fix conntrack refcount leak in ctnetlink with related conntrack entries, from Hangyu Hua. 3) Fix use-after-free/double-free in ctnetlink conntrack insert path, from Florian Westphal. 4) Fix ip6t_rpfilter with VRF, from Phil Sutter. 5) Fix use-after-free in ebtables reported by syzbot, also from Florian. 6) Use skb->len in xt_length to deal with IPv6 jumbo packets, from Xin Long. 7) Fix NETLINK_LISTEN_ALL_NSID with ctnetlink, from Florian Westphal. 8) Fix memleak in {ip_,ip6_,arp_}tables in ENOMEM error case, from Pavel Tikhomirov. * git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf: netfilter: x_tables: fix percpu counter block leak on error path when creating new netns netfilter: ctnetlink: make event listener tracking global netfilter: xt_length: use skb len to match in length_mt6 netfilter: ebtables: fix table blob use-after-free netfilter: ip6t_rpfilter: Fix regression with VRF interfaces netfilter: conntrack: fix rmmod double-free race netfilter: ctnetlink: fix possible refcount leak in ctnetlink_create_conntrack() netfilter: nf_tables: allow to fetch set elements when table has an owner ==================== Link: https://lore.kernel.org/r/20230222092137.88637-1-pablo@netfilter.org Signed-off-by:
Jakub Kicinski <kuba@kernel.org>
-
Íñigo Huguet authored
vclocks were using spinlocks to protect access to its timecounter and cyclecounter. Access to timecounter/cyclecounter is backed by the same driver callbacks that are used for non-virtual PHCs, but the usage of the spinlock imposes a new limitation that didn't exist previously: now they're called in atomic context so they mustn't sleep. Some drivers like sfc or ice may sleep on these callbacks, causing errors like "BUG: scheduling while atomic: ptp5/25223/0x00000002" Fix it replacing the vclock's spinlock by a mutex. It fix the mentioned bug and it doesn't introduce longer delays. I've tested synchronizing various different combinations of clocks: - vclock->sysclock - sysclock->vclock - vclock->vclock - hardware PHC in different NIC -> vclock - created 4 vclocks and launch 4 parallel phc2sys processes with lockdep enabled In all cases, comparing the delays reported by phc2sys, they are in the same range of values than before applying the patch. Link: https://lore.kernel.org/netdev/69d0ff33-bd32-6aa5-d36c-fbdc3c01337c@redhat.com/ Fixes: 5d43f951 ("ptp: add ptp virtual clock driver framework") Reported-by:
Yalin Li <yalli@redhat.com> Suggested-by:
Richard Cochran <richardcochran@gmail.com> Tested-by:
Miroslav Lichvar <mlichvar@redhat.com> Signed-off-by:
Íñigo Huguet <ihuguet@redhat.com> Acked-by:
Richard Cochran <richardcochran@gmail.com> Link: https://lore.kernel.org/r/20230221130616.21837-1-ihuguet@redhat.com Signed-off-by:
Jakub Kicinski <kuba@kernel.org>
-
- Feb 22, 2023
-
-
Pavel Tikhomirov authored
Here is the stack where we allocate percpu counter block: +-< __alloc_percpu +-< xt_percpu_counter_alloc +-< find_check_entry # {arp,ip,ip6}_tables.c +-< translate_table And it can be leaked on this code path: +-> ip6t_register_table +-> translate_table # allocates percpu counter block +-> xt_register_table # fails there is no freeing of the counter block on xt_register_table fail. Note: xt_percpu_counter_free should be called to free it like we do in do_replace through cleanup_entry helper (or in __ip6t_unregister_table). Probability of hitting this error path is low AFAICS (xt_register_table can only return ENOMEM here, as it is not replacing anything, as we are creating new netns, and it is hard to imagine that all previous allocations succeeded and after that one in xt_register_table failed). But it's worth fixing even the rare leak. Fixes: 71ae0dff ("netfilter: xtables: use percpu rule counters") Signed-off-by:
Pavel Tikhomirov <ptikhomirov@virtuozzo.com> Signed-off-by:
Pablo Neira Ayuso <pablo@netfilter.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextLinus Torvalds authored
Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6Linus Torvalds authored
Pull crypto update from Herbert Xu: "API: - Use kmap_local instead of kmap_atomic - Change request callback to take void pointer - Print FIPS status in /proc/crypto (when enabled) Algorithms: - Add rfc4106/gcm support on arm64 - Add ARIA AVX2/512 support on x86 Drivers: - Add TRNG driver for StarFive SoC - Delete ux500/hash driver (subsumed by stm32/hash) - Add zlib support in qat - Add RSA support in aspeed" * tag 'v6.3-p1' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (156 commits) crypto: x86/aria-avx - Do not use avx2 instructions crypto: aspeed - Fix modular aspeed-acry crypto: hisilicon/qm - fix coding style issues crypto: hisilicon/qm - update comments to match function crypto: hisilicon/qm - change function names crypto: hisilicon/qm - use min() instead of min_t() crypto: hisilicon/qm - remove some unused defines crypto: proc - Print fips status crypto: crypto4xx - Call dma_unmap_page when done crypto: octeontx2 - Fix objects shared between several modules crypto: nx - Fix sparse warnings crypto: ecc - Silence sparse warning tls: Pass rec instead of aead_req into tls_encrypt_done crypto: api - Remove completion function scaffolding tls: Remove completion function scaffolding tipc: Remove completion function scaffolding net: ipv6: Remove completion function scaffolding net: ipv4: Remove completion function scaffolding net: macsec: Remove completion function scaffolding dm: Remove completion function scaffolding ...
-
Linus Torvalds authored
Merge tag 'platform-drivers-x86-v6.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86 Pull x86 platform driver updates from Hans de Goede: - AMD PMC: Improvements to aid s2idle debugging - Dell WMI-DDV: hwmon support - INT3472 camera sensor power-management: Improve privacy LED support - Intel VSEC: Base TPMI (Topology Aware Register and PM Capsule Interface) support - Mellanox: SN5600 and Nvidia L1 switch support - Microsoft Surface Support: Various cleanups + code improvements - tools/intel-speed-select: Various improvements - Miscellaneous other cleanups / fixes * tag 'platform-drivers-x86-v6.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86: (80 commits) platform/x86: nvidia-wmi-ec-backlight: Add force module parameter platform/x86/amd/pmf: Add depends on CONFIG_POWER_SUPPLY platform/x86: dell-ddv: Prefer asynchronous probing platform/x86: dell-ddv: Add hwmon support Documentation/ABI: Add new attribute for mlxreg-io sysfs interfaces platform: mellanox: mlx-platform: Move bus shift assignment out of the loop platform: mellanox: mlx-platform: Add mux selection register to regmap platform_data/mlxreg: Add field with mapped resource address platform/mellanox: mlxreg-hotplug: Allow more flexible hotplug events configuration platform: mellanox: Extend all systems with I2C notification callback platform: mellanox: Split logic in init and exit flow platform: mellanox: Split initialization procedure platform: mellanox: Introduce support of new Nvidia L1 switch platform: mellanox: Introduce support for next-generation 800GB/s switch platform: mellanox: Cosmetic changes - rename to more common name platform: mellanox: Change "reset_pwr_converter_fail" attribute platform: mellanox: Introduce support for rack manager switch MAINTAINERS: dell-wmi-sysman: drop Divya Bharathi x86/platform/uv: Make kobj_type structure constant platform/x86: think-lmi: Make kobj_type structure constant ...
-
Linus Torvalds authored
Merge tag 'tag-chrome-platform-for-v6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux Pull chrome platform updates from Tzung-Bi Shih: "New drivers: - cros_ec_uart for ChromeOS EC protocol over UART - cros_typec_vdm for USB PD Vendor Defined Message Improvements: - Preserve logs as much as possible when EC panics - Shutdown to refrain from potential HW damages when EC panics Fixes: - Fix DP_PORT_VDO to include DP_CAP_RECEPTACLE - Fix a lockdep false positive Cleanups: - Use sysfs_emit*() instead of scnprintf() - Use asm instead of asm-generic for unaligned.h Misc: - Rename module name from cros_ec_typec to cros-ec-typec - Minor fixes" * tag 'tag-chrome-platform-for-v6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux: (34 commits) platform/chrome: cros_ec_typec: Fix spelling mistake platform/chrome: cros_typec_vdm: Add Attention support platform/chrome: cros_ec: Add VDM attention headers platform/chrome: cros_typec_vdm: Fix VDO copy platform/chrome: cros_ec_typec: allow deferred probe of switch handles platform/chrome: cros_ec_proto: remove big stub objects from stack platform/chrome: cros_ec_uart: fix negative type promoted to high platform/chrome: cros_ec: Use per-device lockdep key platform/chrome: fix kernel-doc warnings for cros_ec_command platform/chrome: fix kernel-doc warning for last_resume_result platform/chrome: fix kernel-doc warning for suspend_timeout_ms platform/chrome: fix kernel-doc warnings for panic notifier platform/chrome: cros_ec_lpc: initialize the buf variable platform/chrome: cros_ec: Fix panic notifier registration platform/chrome: cros_typec_switch: Check for retimer flag platform/chrome: cros_typec_switch: Use fwnode* prop check platform/chrome: cros_typec_vdm: Add VDM send support platform/chrome: cros_typec_vdm: Add VDM reply support platform/chrome: cros_ec_typec: Add initial VDM support platform/chrome: cros_ec_typec: Alter module name with hyphens ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tipLinus Torvalds authored
Pull xen updates from Juergen Gross: - help deprecate the /proc/xen files by making the related information available via sysfs - mark the Xen variants of play_dead "noreturn" - support a shared Xen platform interrupt - several small cleanups and fixes * tag 'for-linus-6.3-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: xen: sysfs: make kobj_type structure constant x86/Xen: drop leftover VM-assist uses xen: Replace one-element array with flexible-array member xen/grant-dma-iommu: Implement a dummy probe_device() callback xen/pvcalls-back: fix permanently masked event channel xen: Allow platform PCI interrupt to be shared x86/xen/time: prefer tsc as clocksource when it is invariant x86/xen: mark xen_pv_play_dead() as __noreturn x86/xen: don't let xen_pv_play_dead() return drivers/xen/hypervisor: Expose Xen SIF flags to userspace
-
Linus Torvalds authored
Merge tag 'hyperv-next-signed-20230220' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux Pull hyperv updates from Wei Liu: - allow Linux to run as the nested root partition for Microsoft Hypervisor (Jinank Jain and Nuno Das Neves) - clean up the return type of callback functions (Dawei Li) * tag 'hyperv-next-signed-20230220' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux: x86/hyperv: Fix hv_get/set_register for nested bringup Drivers: hv: Make remove callback of hyperv driver void returned Drivers: hv: Enable vmbus driver for nested root partition x86/hyperv: Add an interface to do nested hypercalls Drivers: hv: Setup synic registers in case of nested root partition x86/hyperv: Add support for detecting nested hypervisor
-
Florian Westphal authored
pernet tracking doesn't work correctly because other netns might have set NETLINK_LISTEN_ALL_NSID on its event socket. In this case its expected that events originating in other net namespaces are also received. Making pernet-tracking work while also honoring NETLINK_LISTEN_ALL_NSID requires much more intrusive changes both in netlink and nfnetlink, f.e. adding a 'setsockopt' callback that lets nfnetlink know that the event socket entered (or left) ALL_NSID mode. Move to global tracking instead: if there is an event socket anywhere on the system, all net namespaces which have conntrack enabled and use autobind mode will allocate the ecache extension. netlink_has_listeners() returns false only if the given group has no subscribers in any net namespace, the 'net' argument passed to nfnetlink_has_listeners is only used to derive the protocol (nfnetlink), it has no other effect. For proper NETLINK_LISTEN_ALL_NSID-aware pernet tracking of event listeners a new netlink_has_net_listeners() is also needed. Fixes: 90d1daa4 ("netfilter: conntrack: add nf_conntrack_events autodetect mode") Reported-by:
Bryce Kahle <bryce.kahle@datadoghq.com> Signed-off-by:
Florian Westphal <fw@strlen.de> Signed-off-by:
Pablo Neira Ayuso <pablo@netfilter.org>
-
Xin Long authored
For IPv6 Jumbo packets, the ipv6_hdr(skb)->payload_len is always 0, and its real payload_len ( > 65535) is saved in hbh exthdr. With 0 length for the jumbo packets, it may mismatch. To fix this, we can just use skb->len instead of parsing exthdrs, as the hbh exthdr parsing has been done before coming to length_mt6 in ip6_rcv_core() and br_validate_ipv6() and also the packet has been trimmed according to the correct IPv6 (ext)hdr length there, and skb len is trustable in length_mt6(). Note that this patch is especially needed after the IPv6 BIG TCP was supported in kernel, which is using IPv6 Jumbo packets. Besides, to match the packets greater than 65535 more properly, a v1 revision of xt_length may be needed to extend "min, max" to u32 in the future, and for now the IPv6 Jumbo packets can be matched by: # ip6tables -m length ! --length 0:65535 Fixes: 7c4e983c ("net: allow gso_max_size to exceed 65536") Fixes: 0fe79f28 ("net: allow gro_max_size to exceed 65536") Signed-off-by:
Xin Long <lucien.xin@gmail.com> Signed-off-by:
Pablo Neira Ayuso <pablo@netfilter.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linuxLinus Torvalds authored
Pull arm64 updates from Catalin Marinas: - Support for arm64 SME 2 and 2.1. SME2 introduces a new 512-bit architectural register (ZT0, for the look-up table feature) that Linux needs to save/restore - Include TPIDR2 in the signal context and add the corresponding kselftests - Perf updates: Arm SPEv1.2 support, HiSilicon uncore PMU updates, ACPI support to the Marvell DDR and TAD PMU drivers, reset DTM_PMU_CONFIG (ARM CMN) at probe time - Support for DYNAMIC_FTRACE_WITH_CALL_OPS on arm64 - Permit EFI boot with MMU and caches on. Instead of cleaning the entire loaded kernel image to the PoC and disabling the MMU and caches before branching to the kernel bare metal entry point, leave the MMU and caches enabled and rely on EFI's cacheable 1:1 mapping of all of system RAM to populate the initial page tables - Expose the AArch32 (compat) ELF_HWCAP features to user in an arm64 kernel (the arm32 kernel only defines the values) - Harden the arm64 shadow call stack pointer handling: stash the shadow stack pointer in the task struct on interrupt, load it directly from this structure - Signal handling cleanups to remove redundant validation of size information and avoid reading the same data from userspace twice - Refactor the hwcap macros to make use of the automatically generated ID registers. It should make new hwcaps writing less error prone - Further arm64 sysreg conversion and some fixes - arm64 kselftest fixes and improvements - Pointer authentication cleanups: don't sign leaf functions, unify asm-arch manipulation - Pseudo-NMI code generation optimisations - Minor fixes for SME and TPIDR2 handling - Miscellaneous updates: ARCH_FORCE_MAX_ORDER is now selectable, replace strtobool() to kstrtobool() in the cpufeature.c code, apply dynamic shadow call stack in two passes, intercept pfn changes in set_pte_at() without the required break-before-make sequence, attempt to dump all instructions on unhandled kernel faults * tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (130 commits) arm64: fix .idmap.text assertion for large kernels kselftest/arm64: Don't require FA64 for streaming SVE+ZA tests kselftest/arm64: Copy whole EXTRA context arm64: kprobes: Drop ID map text from kprobes blacklist perf: arm_spe: Print the version of SPE detected perf: arm_spe: Add support for SPEv1.2 inverted event filtering perf: Add perf_event_attr::config3 arm64/sme: Fix __finalise_el2 SMEver check drivers/perf: fsl_imx8_ddr_perf: Remove set-but-not-used variable arm64/signal: Only read new data when parsing the ZT context arm64/signal: Only read new data when parsing the ZA context arm64/signal: Only read new data when parsing the SVE context arm64/signal: Avoid rereading context frame sizes arm64/signal: Make interface for restore_fpsimd_context() consistent arm64/signal: Remove redundant size validation from parse_user_sigframe() arm64/signal: Don't redundantly verify FPSIMD magic arm64/cpufeature: Use helper macros to specify hwcaps arm64/cpufeature: Always use symbolic name for feature value in hwcaps arm64/sysreg: Initial unsigned annotations for ID registers arm64/sysreg: Initial annotation of signed ID registers ...
-
Florian Westphal authored
We are not allowed to return an error at this point. Looking at the code it looks like ret is always 0 at this point, but its not. t = find_table_lock(net, repl->name, &ret, &ebt_mutex); ... this can return a valid table, with ret != 0. This bug causes update of table->private with the new blob, but then frees the blob right away in the caller. Syzbot report: BUG: KASAN: vmalloc-out-of-bounds in __ebt_unregister_table+0xc00/0xcd0 net/bridge/netfilter/ebtables.c:1168 Read of size 4 at addr ffffc90005425000 by task kworker/u4:4/74 Workqueue: netns cleanup_net Call Trace: kasan_report+0xbf/0x1f0 mm/kasan/report.c:517 __ebt_unregister_table+0xc00/0xcd0 net/bridge/netfilter/ebtables.c:1168 ebt_unregister_table+0x35/0x40 net/bridge/netfilter/ebtables.c:1372 ops_exit_list+0xb0/0x170 net/core/net_namespace.c:169 cleanup_net+0x4ee/0xb10 net/core/net_namespace.c:613 ... ip(6)tables appears to be ok (ret should be 0 at this point) but make this more obvious. Fixes: c58dd2dd ("netfilter: Can't fail and free after table replacement") Reported-by:
<syzbot+f61594de72d6705aea03@syzkaller.appspotmail.com> Signed-off-by:
Florian Westphal <fw@strlen.de> Signed-off-by:
Pablo Neira Ayuso <pablo@netfilter.org>
-
Phil Sutter authored
When calling ip6_route_lookup() for the packet arriving on the VRF interface, the result is always the real (slave) interface. Expect this when validating the result. Fixes: acc641ab ("netfilter: rpfilter/fib: Populate flowic_l3mdev field") Signed-off-by:
Phil Sutter <phil@nwl.cc> Signed-off-by:
Pablo Neira Ayuso <pablo@netfilter.org>
-
git://git.armlinux.org.uk/~rmk/linux-armLinus Torvalds authored
Pull ARM udpates from Russell King: - Improve Kconfig help text for Cortex A8 and Cortex A9 errata - Kconfig spelling and grammar fixes - Allow kernel-mode VFP/Neon in softirq context - Use Neon in softirq context - Implement AES-CTR/GHASH version of GCM * tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm: ARM: 9289/1: Allow pre-ARMv5 builds with ld.lld 16.0.0 and newer ARM: 9288/1: Kconfigs: fix spelling & grammar ARM: 9286/1: crypto: Implement fused AES-CTR/GHASH version of GCM ARM: 9285/1: remove meaningless arch/arm/mach-rda/Makefile ARM: 9283/1: permit non-nested kernel mode NEON in softirq context ARM: 9282/1: vfp: Manipulate task VFP state with softirqs disabled ARM: 9281/1: improve Cortex A8/A9 errata help text
-
Florian Westphal authored
nf_conntrack_hash_check_insert() callers free the ct entry directly, via nf_conntrack_free. This isn't safe anymore because nf_conntrack_hash_check_insert() might place the entry into the conntrack table and then delteted the entry again because it found that a conntrack extension has been removed at the same time. In this case, the just-added entry is removed again and an error is returned to the caller. Problem is that another cpu might have picked up this entry and incremented its reference count. This results in a use-after-free/double-free, once by the other cpu and once by the caller of nf_conntrack_hash_check_insert(). Fix this by making nf_conntrack_hash_check_insert() not fail anymore after the insertion, just like before the 'Fixes' commit. This is safe because a racing nf_ct_iterate() has to wait for us to release the conntrack hash spinlocks. While at it, make the function return -EAGAIN in the rmmod (genid changed) case, this makes nfnetlink replay the command (suggested by Pablo Neira). Fixes: c56716c6 ("netfilter: extensions: introduce extension genid count") Signed-off-by:
Florian Westphal <fw@strlen.de> Signed-off-by:
Pablo Neira Ayuso <pablo@netfilter.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68kLinus Torvalds authored
Pull m68k updates from Geert Uytterhoeven: - Add seccomp support - defconfig updates - Miscellaneous fixes and improvements * tag 'm68k-for-v6.3-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k: m68k: /proc/hardware should depend on PROC_FS selftests/seccomp: Add m68k support m68k: Add kernel seccomp support m68k: Check syscall_trace_enter() return code m68k: defconfig: Update defconfigs for v6.2-rc3 m68k: q40: Do not initialise statics to 0
-
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linuxLinus Torvalds authored
Pull s390 updates from Heiko Carstens: - Large cleanup of the con3270/tty3270 driver. Among others this fixes: - Background Color Support - ASCII Line Character Support - VT100 Support - Geometries other than 80x24 - Cleanup and improve cmpxchg() code. Also add cmpxchg_user_key() to uaccess functions, which will be used by KVM to access KVM guest memory with a specific storage key - Add support for user space events counting to CPUMF - Cleanup the vfio/ccw code, which also allows now to properly support 2K Format-2 IDALs - Move kernel page table allocation and initialization to decompressor, which finally allows to enter the kernel with dynamic address translation enabled. This in turn allows to get rid of code with special handling in the kernel, which has to distinguish if DAT is on or off - Replace kretprobe with rethook - Various improvements to vfio/ap queue resets: - Use TAPQ to verify completion of a reset in progress rather than multiple invocations of ZAPQ. - Check TAPQ response codes when verifying successful completion of ZAPQ. - Fix erroneous handling of some error response codes. - Increase the maximum amount of time to wait for successful completion of ZAPQ - Rework system call wrappers to get rid of alias functions, which were only left on s390 - Cleanup diag288_wdt watchdog driver. It has been agreed on with Guenter Roeck that this goes upstream via the s390 tree - Add missing loadparm parameter handling for list-directed ECKD ipl/reipl - Various improvements to memory detection code - Remove arch_cpu_idle_time() since the current implementation is broken, and allows user space observable accounted idle times which can temporarily decrease - Add Reset DAT-Protection support: (only) allow to change PTEs from RO to RW with a new RDP instruction. Unlike the currently used IPTE instruction, this does not necessarily guarantee that TLBs of all CPUs are synchronously flushed; and that remote CPUs can see spurious protection faults. The overall improvement for not requiring an all CPU synchronization, like it is required with IPTE, should be beneficial - Fix KFENCE page fault reporting - Smaller cleanups and improvement all over the place * tag 's390-6.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (182 commits) s390/irq,idle: simplify idle check s390/processor: add test_and_set_cpu_flag() and test_and_clear_cpu_flag() s390/processor: let cpu helper functions return boolean values s390/kfence: fix page fault reporting s390/zcrypt: introduce ctfm field in struct CPRBX s390: remove confusing comment from uapi types header file vfio/ccw: remove WARN_ON during shutdown s390/entry: remove toolchain dependent micro-optimization s390/mem_detect: do not truncate online memory ranges info s390/vx: remove __uint128_t type from __vector128 struct again s390/mm: add support for RDP (Reset DAT-Protection) s390/mm: define private VM_FAULT_* reasons from top bits Documentation: s390: correct spelling s390/ap: fix status returned by ap_qact() s390/ap: fix status returned by ap_aqic() s390: vfio-ap: tighten the NIB validity check Revert "s390/mem_detect: do not update output parameters on failure" s390/idle: remove arch_cpu_idle_time() and corresponding code s390/vx: use simple assignments to access __vector128 members s390/vx: add 64 and 128 bit members to __vector128 struct ...
-
Hangyu Hua authored
nf_ct_put() needs to be called to put the refcount got by nf_conntrack_find_get() to avoid refcount leak when nf_conntrack_hash_check_insert() fails. Fixes: 7d367e06 ("netfilter: ctnetlink: fix soft lockup when netlink adds new entries (v2)") Signed-off-by:
Hangyu Hua <hbh25y@gmail.com> Acked-by:
Florian Westphal <fw@strlen.de> Signed-off-by:
Pablo Neira Ayuso <pablo@netfilter.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull x86 cpuid updates from Borislav Petkov: - Cache the AMD debug registers in per-CPU variables to avoid MSR writes where possible, when supporting a debug registers swap feature for SEV-ES guests - Add support for AMD's version of eIBRS called Automatic IBRS which is a set-and-forget control of indirect branch restriction speculation resources on privilege change - Add support for a new x86 instruction - LKGS - Load kernel GS which is part of the FRED infrastructure - Reset SPEC_CTRL upon init to accomodate use cases like kexec which rediscover - Other smaller fixes and cleanups * tag 'x86_cpu_for_v6.3_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/amd: Cache debug register values in percpu variables KVM: x86: Propagate the AMD Automatic IBRS feature to the guest x86/cpu: Support AMD Automatic IBRS x86/cpu, kvm: Add the SMM_CTL MSR not present feature x86/cpu, kvm: Add the Null Selector Clears Base feature x86/cpu, kvm: Move X86_FEATURE_LFENCE_RDTSC to its native leaf x86/cpu, kvm: Add the NO_NESTED_DATA_BP feature KVM: x86: Move open-coded CPUID leaf 0x80000021 EAX bit propagation code x86/cpu, kvm: Add support for CPUID_80000021_EAX x86/gsseg: Add the new <asm/gsseg.h> header to <asm/asm-prototypes.h> x86/gsseg: Use the LKGS instruction if available for load_gs_index() x86/gsseg: Move load_gs_index() to its own new header file x86/gsseg: Make asm_load_gs_index() take an u16 x86/opcode: Add the LKGS instruction to x86-opcode-map x86/cpufeature: Add the CPU feature bit for LKGS x86/bugs: Reset speculation control settings on init x86/cpu: Remove redundant extern x86_read_arch_cap_msr()
-
Dave Hansen authored
The results of "access_ok()" can be mis-speculated. The result is that you can end speculatively: if (access_ok(from, size)) // Right here even for bad from/size combinations. On first glance, it would be ideal to just add a speculation barrier to "access_ok()" so that its results can never be mis-speculated. But there are lots of system calls just doing access_ok() via "copy_to_user()" and friends (example: fstat() and friends). Those are generally not problematic because they do not _consume_ data from userspace other than the pointer. They are also very quick and common system calls that should not be needlessly slowed down. "copy_from_user()" on the other hand uses a user-controller pointer and is frequently followed up with code that might affect caches. Take something like this: if (!copy_from_user(&kernelvar, uptr, size)) do_something_with(kernelvar); If userspace passes in an evil 'uptr' that *actually* points to a kernel addresses, and then do_something_with() has cache (or other) side-effects, it could allow userspace to infer kernel data values. Add a barrier to the common copy_from_user() code to prevent mis-speculated values which happen after the copy. Also add a stub for architectures that do not define barrier_nospec(). This makes the macro usable in generic code. Since the barrier is now usable in generic code, the x86 #ifdef in the BPF code can also go away. Reported-by:
Jordy Zomer <jordyzomer@google.com> Suggested-by:
Linus Torvalds <torvalds@linuxfoundation.org> Signed-off-by:
Dave Hansen <dave.hansen@linux.intel.com> Reviewed-by:
Thomas Gleixner <tglx@linutronix.de> Acked-by: Daniel Borkmann <daniel@iogearbox.net> # BPF bits Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pmLinus Torvalds authored
Pull thermal control updates from Rafael Wysocki: "The majority of changes here are related to the general switch-over to using arrays of generic trip point structures registered along with a thermal zone instead of trip point callbacks (this has been done mostly by Daniel Lezcano with some help from yours truly on the Intel drivers front). Apart from that and the related reorganization of code, there are some enhancements of the existing driver and a new Mediatek Low Voltage Thermal Sensor (LVTS) driver. The Intel powerclamp undergoes a major rework so it will use the generic idle_inject facility for CPU idle time injection going forward and it will take additional module parameters for specifying the subset of CPUs to be affected by it (work done by Srinivas Pandruvada). Also included are assorted fixes and a whole bunch of cleanups. Specifics: - Rework a large bunch of drivers to use the generic thermal trip structure and use the opportunity to do more cleanups by removing unused functions from the OF code (Daniel Lezcano) - Remove core header inclusion from drivers (Daniel Lezcano) - Fix some locking issues related to the generic thermal trip rework (Johan Hovold) - Fix a crash when requesting the critical temperature on tegra, which is related to the generic trip point work (Jon Hunter) - Clean up thermal device unregistration code (Viresh Kumar) - Fix and clean up thermal control core initialization error code paths (Daniel Lezcano) - Relocate the trip points handling code into a separate file (Daniel Lezcano) - Make the thermal core fail registration of thermal zones and cooling devices if the thermal class has not been registered (Rafael Wysocki) - Add trip point initialization helper functions for ACPI-defined trip points and modify two thermal drivers to use them (Rafael Wysocki, Daniel Lezcano) - Make the core thermal control code use sysfs_emit_at() instead of scnprintf() where applicable (ye xingchen) - Consolidate code accessing the Intel TCC (Thermal Control Circuitry) MSRs by introducing library functions for that and making the TCC-related code in thermal drivers use them (Zhang Rui) - Enhance the x86_pkg_temp_thermal driver to support dynamic tjmax changes (Zhang Rui) - Address an "unsigned expression compared with zero" warning in the intel_soc_dts_iosf thermal driver (Yang Li) - Update comments regarding two functions in the Intel Menlow thermal driver (Deming Wang) - Use sysfs_emit_at() instead of scnprintf() in the int340x thermal driver (ye xingchen) - Make the intel_pch thermal driver support the Wellsburg PCH (Tim Zimmermann) - Modify the intel_pch and processor_thermal_device_pci thermal drivers use generic trip point tables instead of thermal zone trip point callbacks (Daniel Lezcano) - Add production mode attribute sysfs attribute to the int340x thermal driver (Srinivas Pandruvada) - Rework dynamic trip point updates handling and locking in the int340x thermal driver (Rafael Wysocki) - Make the int340x thermal driver use a generic trip points table instead of thermal zone trip point callbacks (Rafael Wysocki, Daniel Lezcano) - Clean up and improve the int340x thermal driver (Rafael Wysocki) - Simplify and clean up the intel_pch thermal driver (Rafael Wysocki) - Fix the Intel powerclamp thermal driver and make it use the common idle injection framework (Srinivas Pandruvada) - Add two module parameters, cpumask and max_idle, to the Intel powerclamp thermal driver to allow it to affect only a specific subset of CPUs instead of all of them (Srinivas Pandruvada) - Make the Intel quark_dts thermal driver Use generic trip point objects instead of its own trip point representation (Daniel Lezcano) - Add toctree entry for thermal documents and fix two issues in the Intel powerclamp driver documentation (Bagas Sanjaya) - Use strscpy() to instead of strncpy() in the thermal core (Xu Panda) - Fix thermal_sampling_exit() (Vincent Guittot) - Add Mediatek Low Voltage Thermal Sensor (LVTS) driver (Balsam Chihi) - Add r8a779g0 RCar support to the rcar_gen3 thermal driver (Geert Uytterhoeven) - Fix useless call to set_trips() when resuming in the rcar_gen3 thermal control driver and add interrupt support detection at init time to it (Niklas Söderlund) - Fix memory corruption in the hi3660 thermal driver (Yongqin Liu) - Fix include path for libnl3 in pkg-config file for libthermal (Vibhav Pant) - Remove syscfg-based driver for st as the platform is not supported any more (Alain Volmat)" * tag 'thermal-6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (135 commits) thermal/drivers/st: Remove syscfg based driver thermal: Remove core header inclusion from drivers tools/lib/thermal: Fix include path for libnl3 in pkg-config file. thermal/drivers/hisi: Drop second sensor hi3660 thermal/drivers/rcar_gen3_thermal: Fix device initialization thermal/drivers/rcar_gen3_thermal: Create device local ops struct thermal/drivers/rcar_gen3_thermal: Do not call set_trips() when resuming thermal/drivers/rcar_gen3: Add support for R-Car V4H dt-bindings: thermal: rcar-gen3-thermal: Add r8a779g0 support thermal/drivers/mediatek: Add the Low Voltage Thermal Sensor driver dt-bindings: thermal: mediatek: Add LVTS thermal controllers thermal/drivers/mediatek: Relocate driver to mediatek folder tools/lib/thermal: Fix thermal_sampling_exit() Documentation: powerclamp: Fix numbered lists formatting Documentation: powerclamp: Escape wildcard in cpumask description Documentation: admin-guide: Add toctree entry for thermal docs thermal: intel: powerclamp: Add two module parameters Documentation: admin-guide: Move intel_powerclamp documentation thermal: core: Use sysfs_emit_at() instead of scnprintf() thermal: intel: powerclamp: Fix duration module parameter ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pmLinus Torvalds authored
Pull ACPI updates from Rafael Wysocki: "These fix a frequency limit issue in the ACPI processor performance library code, fix a few issues in the ACPICA code, improve Crystal Cove support in the ACPI PMIC driver, fix string handling in the ACPI battery driver, add IRQ override quirks for a few machines more, fix other assorted problems and clean up code and documentation. Specifics: - Drop port I/O validation for some regions to avoid AML failures due to rejections of legitimate port I/O writes (Mario Limonciello) - Constify acpi_get_handle() pathname argument to allow its callers to pass const pathnames to it (Sakari Ailus) - Prevent acpi_ns_simple_repair() from crashing in some cases when AE_AML_NO_RETURN_VALUE should be returned (Daniil Tatianin) - Fix typo in CDAT DSMAS struct definition (Lukas Wunner) - Drop an unnecessary (void *) conversion from the ACPI processor driver (Zhou jie) - Modify the ACPI processor performance library code to use the "no limit" frequency QoS as appropriate and adjust the intel_pstate driver accordingly (Rafael Wysocki) - Add support for NBFT to the ACPI table parser (Stuart Hayes) - Introduce list of known non-PNP devices to avoid enumerating some of them as PNP devices (Rafael Wysocki) - Add x86 ACPI paths to the ACPI entry in MAINTAINERS to allow scripts to report the actual maintainers information (Rafael Wysocki) - Add two more entries to the ACPI IRQ override quirk list (Adam Niederer, Werner Sembach) - Add a pmic_i2c_address entry for Intel Bay Trail Crystal Cove to allow intel_soc_pmic_exec_mipi_pmic_seq_element() to be used with the Bay Trail Crystal Cove PMIC OpRegion driver (Hans de Goede) - Add comments with DSDT power OpRegion field names to the ACPI PMIC driver (Hans de Goede) - Fix string termination handling in the ACPI battery driver (Armin Wolf) - Limit error type to 32-bit width in the ACPI APEI error injection code (Shuai Xue) - Fix Lenovo Ideapad Z570 DMI match in the ACPI backlight driver (Hans de Goede) - Silence missing prototype warnings in some places in the ACPI-related code (Ammar Faizi) - Make kobj_type structures used in the ACPI code constant (Thomas Weißschuh) - Correct spelling in firmware-guide/ACPI (Randy Dunlap) - Clarify the meaning of Explicit and Implicit in the _DSD GPIO properties documentation (Andy Shevchenko) - Fix some kernel-doc comments in the ACPI CPPC library code (Yang Li)" * tag 'acpi-6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (25 commits) ACPI: make kobj_type structures constant Documentation: firmware-guide: gpio-properties: Clarify Explicit and Implicit ACPICA: Fix typo in CDAT DSMAS struct definition ACPI: resource: Do IRQ override on all TongFang GMxRGxx ACPI: resource: Add IRQ overrides for MAINGEAR Vector Pro 2 models ACPI: CPPC: Fix some kernel-doc comments ACPI: video: Fix Lenovo Ideapad Z570 DMI match Documentation: firmware-guide/ACPI: correct spelling ACPI: PMIC: Add comments with DSDT power opregion field names ACPI: battery: Increase maximum string length ACPI: battery: Fix buffer overread if not NUL-terminated ACPI: APEI: EINJ: Limit error type to 32-bit width MAINTAINERS: Add x86 ACPI paths to the ACPI entry ACPI: battery: Fix missing NUL-termination with large strings ACPI: PNP: Introduce list of known non-PNP devices ACPICA: nsrepair: handle cases without a return value correctly ACPI: Silence missing prototype warnings cpufreq: intel_pstate: Drop ACPI _PSS states table patching ACPI: processor: perflib: Avoid updating frequency QoS unnecessarily ACPI: processor: perflib: Use the "no limit" frequency QoS ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pmLinus Torvalds authored
Pull power management updates from Rafael Wysocki: "These add EPP support to the AMD P-state cpufreq driver, add support for new platforms to the Intel RAPL power capping driver, intel_idle and the Qualcomm cpufreq driver, enable thermal cooling for Tegra194, drop the custom cpufreq driver for loongson1 that is not necessary any more (and the corresponding cpufreq platform device), fix assorted issues and clean up code. Specifics: - Add EPP support to the AMD P-state cpufreq driver (Perry Yuan, Wyes Karny, Arnd Bergmann, Bagas Sanjaya) - Drop the custom cpufreq driver for loongson1 that is not necessary any more and the corresponding cpufreq platform device (Keguang Zhang) - Remove "select SRCU" from system sleep, cpufreq and OPP Kconfig entries (Paul E. McKenney) - Enable thermal cooling for Tegra194 (Yi-Wei Wang) - Register module device table and add missing compatibles for cpufreq-qcom-hw (Nícolas F. R. A. Prado, Abel Vesa and Luca Weiss) - Various dt binding updates for qcom-cpufreq-nvmem and opp-v2-kryo-cpu (Christian Marangi) - Make kobj_type structure in the cpufreq core constant (Thomas Weißschuh) - Make cpufreq_unregister_driver() return void (Uwe Kleine-König) - Make the TEO cpuidle governor check CPU utilization in order to refine idle state selection (Kajetan Puchalski) - Make Kconfig select the haltpoll cpuidle governor when the haltpoll cpuidle driver is selected and replace a default_idle() call in that driver with arch_cpu_idle() to allow MWAIT to be used (Li RongQing) - Add Emerald Rapids Xeon support to the intel_idle driver (Artem Bityutskiy) - Add ARCH_SUSPEND_POSSIBLE dependencies for ARMv4 cpuidle drivers to avoid randconfig build failures (Arnd Bergmann) - Make kobj_type structures used in the cpuidle sysfs interface constant (Thomas Weißschuh) - Make the cpuidle driver registration code update microsecond values of idle state parameters in accordance with their nanosecond values if they are provided (Rafael Wysocki) - Make the PSCI cpuidle driver prevent topology CPUs from being suspended on PREEMPT_RT (Krzysztof Kozlowski) - Document that pm_runtime_force_suspend() cannot be used with DPM_FLAG_SMART_SUSPEND (Richard Fitzgerald) - Add EXPORT macros for exporting PM functions from drivers (Richard Fitzgerald) - Remove /** from non-kernel-doc comments in hibernation code (Randy Dunlap) - Fix possible name leak in powercap_register_zone() (Yang Yingliang) - Add Meteor Lake and Emerald Rapids support to the intel_rapl power capping driver (Zhang Rui) - Modify the idle_inject power capping facility to support 100% idle injection (Srinivas Pandruvada) - Fix large time windows handling in the intel_rapl power capping driver (Zhang Rui) - Fix memory leaks with using debugfs_lookup() in the generic PM domains and Energy Model code (Greg Kroah-Hartman) - Add missing 'cache-unified' property in the example for kryo OPP bindings (Rob Herring) - Fix error checking in opp_migrate_dentry() (Qi Zheng) - Let qcom,opp-fuse-level be a 2-long array for qcom SoCs (Konrad Dybcio) - Modify some power management utilities to use the canonical ftrace path (Ross Zwisler) - Correct spelling problems for Documentation/power/ as reported by codespell (Randy Dunlap)" * tag 'pm-6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (53 commits) Documentation: amd-pstate: disambiguate user space sections cpufreq: amd-pstate: Fix invalid write to MSR_AMD_CPPC_REQ dt-bindings: opp: opp-v2-kryo-cpu: enlarge opp-supported-hw maximum dt-bindings: cpufreq: qcom-cpufreq-nvmem: make cpr bindings optional dt-bindings: cpufreq: qcom-cpufreq-nvmem: specify supported opp tables PM: Add EXPORT macros for exporting PM functions cpuidle: psci: Do not suspend topology CPUs on PREEMPT_RT MIPS: loongson32: Drop obsolete cpufreq platform device powercap: intel_rapl: Fix handling for large time window cpuidle: driver: Update microsecond values of state parameters as needed cpuidle: sysfs: make kobj_type structures constant cpuidle: add ARCH_SUSPEND_POSSIBLE dependencies PM: EM: fix memory leak with using debugfs_lookup() PM: domains: fix memory leak with using debugfs_lookup() cpufreq: Make kobj_type structure constant cpufreq: davinci: Fix clk use after free cpufreq: amd-pstate: avoid uninitialized variable use cpufreq: Make cpufreq_unregister_driver() return void OPP: fix error checking in opp_migrate_dentry() dt-bindings: cpufreq: cpufreq-qcom-hw: Add SM8550 compatible ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linuxLinus Torvalds authored
Pull hardening updates from Kees Cook: "Beyond some specific LoadPin, UBSAN, and fortify features, there are other fixes scattered around in various subsystems where maintainers were okay with me carrying them in my tree or were non-responsive but the patches were reviewed by others: - Replace 0-length and 1-element arrays with flexible arrays in various subsystems (Paulo Miguel Almeida, Stephen Rothwell, Kees Cook) - randstruct: Disable Clang 15 support (Eric Biggers) - GCC plugins: Drop -std=gnu++11 flag (Sam James) - strpbrk(): Refactor to use strchr() (Andy Shevchenko) - LoadPin LSM: Allow root filesystem switching when non-enforcing - fortify: Use dynamic object size hints when available - ext4: Fix CFI function prototype mismatch - Nouveau: Fix DP buffer size arguments - hisilicon: Wipe entire crypto DMA pool on error - coda: Fully allocate sig_inputArgs - UBSAN: Improve arm64 trap code reporting - copy_struct_from_user(): Add minimum bounds check on kernel buffer size" * tag 'hardening-v6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: randstruct: disable Clang 15 support uaccess: Add minimum bounds check on kernel buffer size arm64: Support Clang UBSAN trap codes for better reporting coda: Avoid partial allocation of sig_inputArgs gcc-plugins: drop -std=gnu++11 to fix GCC 13 build lib/string: Use strchr() in strpbrk() crypto: hisilicon: Wipe entire pool on error net/i40e: Replace 0-length array with flexible array io_uring: Replace 0-length array with flexible array ext4: Fix function prototype mismatch for ext4_feat_ktype i915/gvt: Replace one-element array with flexible-array member drm/nouveau/disp: Fix nvif_outp_acquire_dp() argument size LoadPin: Allow filesystem switch when not enforcing LoadPin: Move pin reporting cleanly out of locking LoadPin: Refactor sysctl initialization LoadPin: Refactor read-only check into a helper ARM: ixp4xx: Replace 0-length arrays with flexible arrays fortify: Use __builtin_dynamic_object_size() when available rxrpc: replace zero-lenth array with DECLARE_FLEX_ARRAY() helper
-
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linuxLinus Torvalds authored
Pull seccomp update from Kees Cook: - Fix kernel-doc function name ordering to avoid warning (Randy Dunlap) * tag 'seccomp-v6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: seccomp: fix kernel-doc function name warning
-
git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcuLinus Torvalds authored
Pull RCU updates from Paul McKenney: - Documentation updates - Miscellaneous fixes, perhaps most notably: - Throttling callback invocation based on the number of callbacks that are now ready to invoke instead of on the total number of callbacks - Several patches that suppress false-positive boot-time diagnostics, for example, due to lockdep not yet being initialized - Make expedited RCU CPU stall warnings dump stacks of any tasks that are blocking the stalled grace period. (Normal RCU CPU stall warnings have done this for many years) - Lazy-callback fixes to avoid delays during boot, suspend, and resume. (Note that lazy callbacks must be explicitly enabled, so this should not (yet) affect production use cases) - Make kfree_rcu() and friends take advantage of polled grace periods, thus reducing memory footprint by almost two orders of magnitude, admittedly on a microbenchmark This also begins the transition from kfree_rcu(p) to kfree_rcu_mightsleep(p). This transition was motivated by bugs where kfree_rcu(p), which can block, was typed instead of the intended kfree_rcu(p, rh) - SRCU updates, perhaps most notably fixing a bug that causes SRCU to fail when booted on a system with a non-zero boot CPU. This surprising situation actually happens for kdump kernels on the powerpc architecture This also adds an srcu_down_read() and srcu_up_read(), which act like srcu_read_lock() and srcu_read_unlock(), but allow an SRCU read-side critical section to be handed off from one task to another - Clean up the now-useless SRCU Kconfig option There are a few more commits that are not yet acked or pulled into maintainer trees, and these will be in a pull request for a later merge window - RCU-tasks updates, perhaps most notably these fixes: - A strange interaction between PID-namespace unshare and the RCU-tasks grace period that results in a low-probability but very real hang - A race between an RCU tasks rude grace period on a single-CPU system and CPU-hotplug addition of the second CPU that can result in a too-short grace period - A race between shrinking RCU tasks down to a single callback list and queuing a new callback to some other CPU, but where that queuing is delayed for more than an RCU grace period. This can result in that callback being stranded on the non-boot CPU - Torture-test updates and fixes - Torture-test scripting updates and fixes - Provide additional RCU CPU stall-warning information in kernels built with CONFIG_RCU_CPU_STALL_CPUTIME=y, and restore the full five-minute timeout limit for expedited RCU CPU stall warnings * tag 'rcu.2023.02.10a' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu: (80 commits) rcu/kvfree: Add kvfree_rcu_mightsleep() and kfree_rcu_mightsleep() kernel/notifier: Remove CONFIG_SRCU init: Remove "select SRCU" fs/quota: Remove "select SRCU" fs/notify: Remove "select SRCU" fs/btrfs: Remove "select SRCU" fs: Remove CONFIG_SRCU drivers/pci/controller: Remove "select SRCU" drivers/net: Remove "select SRCU" drivers/md: Remove "select SRCU" drivers/hwtracing/stm: Remove "select SRCU" drivers/dax: Remove "select SRCU" drivers/base: Remove CONFIG_SRCU rcu: Disable laziness if lazy-tracking says so rcu: Track laziness during boot and suspend rcu: Remove redundant call to rcu_boost_kthread_setaffinity() rcu: Allow up to five minutes expedited RCU CPU stall-warning timeouts rcu: Align the output of RCU CPU stall warning messages rcu: Add RCU stall diagnosis information sched: Add helper nr_context_switches_cpu() ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroupLinus Torvalds authored
Pull cgroup updates from Tejun Heo: "All the changes are trivial: documentation updates and a trivial code cleanup" * tag 'cgroup-for-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup: cgroup/cpuset: fix a few kernel-doc warnings & coding style docs: cgroup-v1: use numbered lists for user interface setup docs: cgroup-v1: add internal cross-references docs: cgroup-v1: make swap extension subsections subsections docs: cgroup-v1: use bullet lists for list of stat file tables docs: cgroup-v1: move hierarchy of accounting caption docs: cgroup-v1: fix footnotes docs: cgroup-v1: use code block for locking order schema docs: cgroup-v1: wrap remaining admonitions in admonition blocks docs: cgroup-v1: replace custom note constructs with appropriate admonition blocks cgroup/cpuset: no need to explicitly init a global static variable
-
git://git.kernel.org/pub/scm/linux/kernel/git/tj/wqLinus Torvalds authored
Pull workqueue updates from Tejun Heo: - When per-cpu workqueue workers expire after sitting idle for too long, they used to wake up to the CPU that they're bound to in order to exit. This unfortunately could cause unwanted disturbances on CPUs isolated for e.g. RT applications. The worker exit path is restructured so that an existing worker is unbound from its CPU before being woken up for the last time, allowing it to migrate away from an isolated CPU for exiting. - A couple debug improvements. Watchdog dump is made more compact and workqueue now warns if used-after-free during the RCU grace period after destroy_workqueue(). * tag 'wq-for-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq: workqueue: Fold rebind_worker() within rebind_workers() workqueue: Unbind kworkers before sending them to exit() workqueue: Don't hold any lock while rcuwait'ing for !POOL_MANAGER_ACTIVE workqueue: Convert the idle_timer to a timer + work_struct workqueue: Factorize unbind/rebind_workers() logic workqueue: Protects wq_unbound_cpumask with wq_pool_attach_mutex workqueue: Make show_pwq() use run-length encoding workqueue: Add a new flag to spot the potential UAF error
-