- Apr 03, 2024
-
-
Masami Hiramatsu (Google) authored
[ Upstream commit 4e51653d ] Read from an unsafe address with copy_from_kernel_nofault() in arch_adjust_kprobe_addr() because this function is used before checking the address is in text or not. Syzcaller bot found a bug and reported the case if user specifies inaccessible data area, arch_adjust_kprobe_addr() will cause a kernel panic. [ mingo: Clarified the comment. ] Fixes: cc66bb91 ("x86/ibt,kprobes: Cure sym+0 equals fentry woes") Reported-by:
Qiang Zhang <zzqq0103.hey@gmail.com> Tested-by:
Jinghao Jia <jinghao7@illinois.edu> Signed-off-by:
Masami Hiramatsu (Google) <mhiramat@kernel.org> Signed-off-by:
Ingo Molnar <mingo@kernel.org> Link: https://lore.kernel.org/r/171042945004.154897.2221804961882915806.stgit@devnote2 Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Biju Das authored
[ Upstream commit 853a6030 ] RZ/G2L interrupt chips require that the interrupt is masked before changing the NMI, IRQ, TINT interrupt settings. Aside of that, after setting an edge trigger type it is required to clear the interrupt status register in order to avoid spurious interrupts. The current implementation fails to do either of that and therefore is prone to generate spurious interrupts when setting the trigger type. Address this by: - Ensuring that the interrupt is masked at the chip level across the update for the TINT chip - Clearing the interrupt status register after updating the trigger mode for edge type interrupts [ tglx: Massaged changelog and reverted the spin_lock_irqsave() change as the set_type() callback is always called with interrupts disabled. ] Fixes: 3fed0955 ("irqchip: Add RZ/G2L IA55 Interrupt Controller driver") Signed-off-by:
Biju Das <biju.das.jz@bp.renesas.com> Signed-off-by:
Thomas Gleixner <tglx@linutronix.de> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Biju Das authored
[ Upstream commit b4b5cd61 ] Rename rzg2l_irq_eoi()->rzg2l_clear_irq_int() and simplify the code by removing redundant priv local variable. Suggested-by:
Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by:
Biju Das <biju.das.jz@bp.renesas.com> Signed-off-by:
Thomas Gleixner <tglx@linutronix.de> Stable-dep-of: 853a6030 ("irqchip/renesas-rzg2l: Prevent spurious interrupts when setting trigger type") Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Biju Das authored
[ Upstream commit 7cb6362c ] Rename rzg2l_tint_eoi()->rzg2l_clear_tint_int() and simplify the code by removing redundant priv and hw_irq local variables. Signed-off-by:
Biju Das <biju.das.jz@bp.renesas.com> Signed-off-by:
Thomas Gleixner <tglx@linutronix.de> Reviewed-by:
Geert Uytterhoeven <geert+renesas@glider.be> Stable-dep-of: 853a6030 ("irqchip/renesas-rzg2l: Prevent spurious interrupts when setting trigger type") Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Claudiu Beznea authored
[ Upstream commit 2eca4731 ] There are 2 TITSR registers available on the IA55 interrupt controller. Add a macro that retrieves the TITSR register offset based on it's index. This macro is useful in when adding suspend/resume support so both TITSR registers can be accessed in a for loop. Signed-off-by:
Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com> Signed-off-by:
Thomas Gleixner <tglx@linutronix.de> Link: https://lore.kernel.org/r/20231120111820.87398-7-claudiu.beznea.uj@bp.renesas.com Stable-dep-of: 853a6030 ("irqchip/renesas-rzg2l: Prevent spurious interrupts when setting trigger type") Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Biju Das authored
[ Upstream commit 9eec61df ] The irq_eoi() callback of the RZ/G2L interrupt chip clears the relevant interrupt cause bit in the TSCR register by writing to it. This write is not sufficient because the write is posted and therefore not guaranteed to immediately clear the bit. Due to that delay the CPU can raise the just handled interrupt again. Prevent this by reading the register back which causes the posted write to be flushed to the hardware before the read completes. Fixes: 3fed0955 ("irqchip: Add RZ/G2L IA55 Interrupt Controller driver") Signed-off-by:
Biju Das <biju.das.jz@bp.renesas.com> Signed-off-by:
Thomas Gleixner <tglx@linutronix.de> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Claudiu Beznea authored
[ Upstream commit ef88eefb ] The RZ/G2L manual (chapter "IRQ Status Control Register (ISCR)") describes the operation to clear interrupts through the ISCR register as follows: [Write operation] When "Falling-edge detection", "Rising-edge detection" or "Falling/Rising-edge detection" is set in IITSR: - In case ISTAT is 1 0: IRQn interrupt detection status is cleared. 1: Invalid to write. - In case ISTAT is 0 Invalid to write. When "Low-level detection" is set in IITSR.: Invalid to write. Take the interrupt type into account when clearing interrupts through the ISCR register to avoid writing the ISCR when the interrupt type is level. Signed-off-by:
Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com> Signed-off-by:
Thomas Gleixner <tglx@linutronix.de> Reviewed-by:
Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/20231120111820.87398-6-claudiu.beznea.uj@bp.renesas.com Stable-dep-of: 9eec61df ("irqchip/renesas-rzg2l: Flush posted write in irq_eoi()") Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
John Ogness authored
[ Upstream commit 80769724 ] console_trylock_spinning() may takeover the console lock from a schedulable context. Update @console_may_schedule to make sure it reflects a trylock acquire. Reported-by:
Mukesh Ojha <quic_mojha@quicinc.com> Closes: https://lore.kernel.org/lkml/20240222090538.23017-1-quic_mojha@quicinc.com Fixes: dbdda842 ("printk: Add console owner and waiter logic to load balance console writes") Signed-off-by:
John Ogness <john.ogness@linutronix.de> Reviewed-by:
Mukesh Ojha <quic_mojha@quicinc.com> Reviewed-by:
Petr Mladek <pmladek@suse.com> Link: https://lore.kernel.org/r/875xybmo2z.fsf@jogness.linutronix.de Signed-off-by:
Petr Mladek <pmladek@suse.com> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Nicolin Chen authored
[ Upstream commit afc5aa46 ] The swiotlb does not support a mapping size > swiotlb_max_mapping_size(). On the other hand, with a 64KB PAGE_SIZE configuration, it's observed that an NVME device can map a size between 300KB~512KB, which certainly failed the swiotlb mappings, though the default pool of swiotlb has many slots: systemd[1]: Started Journal Service. => nvme 0000:00:01.0: swiotlb buffer is full (sz: 327680 bytes), total 32768 (slots), used 32 (slots) note: journal-offline[392] exited with irqs disabled note: journal-offline[392] exited with preempt_count 1 Call trace: [ 3.099918] swiotlb_tbl_map_single+0x214/0x240 [ 3.099921] iommu_dma_map_page+0x218/0x328 [ 3.099928] dma_map_page_attrs+0x2e8/0x3a0 [ 3.101985] nvme_prep_rq.part.0+0x408/0x878 [nvme] [ 3.102308] nvme_queue_rqs+0xc0/0x300 [nvme] [ 3.102313] blk_mq_flush_plug_list.part.0+0x57c/0x600 [ 3.102321] blk_add_rq_to_plug+0x180/0x2a0 [ 3.102323] blk_mq_submit_bio+0x4c8/0x6b8 [ 3.103463] __submit_bio+0x44/0x220 [ 3.103468] submit_bio_noacct_nocheck+0x2b8/0x360 [ 3.103470] submit_bio_noacct+0x180/0x6c8 [ 3.103471] submit_bio+0x34/0x130 [ 3.103473] ext4_bio_write_folio+0x5a4/0x8c8 [ 3.104766] mpage_submit_folio+0xa0/0x100 [ 3.104769] mpage_map_and_submit_buffers+0x1a4/0x400 [ 3.104771] ext4_do_writepages+0x6a0/0xd78 [ 3.105615] ext4_writepages+0x80/0x118 [ 3.105616] do_writepages+0x90/0x1e8 [ 3.105619] filemap_fdatawrite_wbc+0x94/0xe0 [ 3.105622] __filemap_fdatawrite_range+0x68/0xb8 [ 3.106656] file_write_and_wait_range+0x84/0x120 [ 3.106658] ext4_sync_file+0x7c/0x4c0 [ 3.106660] vfs_fsync_range+0x3c/0xa8 [ 3.106663] do_fsync+0x44/0xc0 Since untrusted devices might go down the swiotlb pathway with dma-iommu, these devices should not map a size larger than swiotlb_max_mapping_size. To fix this bug, add iommu_dma_max_mapping_size() for untrusted devices to take into account swiotlb_max_mapping_size() v.s. iova_rcache_range() from the iommu_dma_opt_mapping_size(). Fixes: 82612d66 ("iommu: Allow the dma-iommu api to use bounce buffers") Link: https://lore.kernel.org/r/ee51a3a5c32cf885b18f6416171802669f4a718a.1707851466.git.nicolinc@nvidia.com Signed-off-by:
Nicolin Chen <nicolinc@nvidia.com> [will: Drop redundant is_swiotlb_active(dev) check] Signed-off-by:
Will Deacon <will@kernel.org> Reviewed-by:
Michael Kelley <mhklinux@outlook.com> Acked-by:
Robin Murphy <robin.murphy@arm.com> Tested-by:
Nicolin Chen <nicolinc@nvidia.com> Tested-by:
Michael Kelley <mhklinux@outlook.com> Signed-off-by:
Christoph Hellwig <hch@lst.de> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Will Deacon authored
[ Upstream commit 51b30ecb ] Nicolin reports that swiotlb buffer allocations fail for an NVME device behind an IOMMU using 64KiB pages. This is because we end up with a minimum allocation alignment of 64KiB (for the IOMMU to map the buffer safely) but a minimum DMA alignment mask corresponding to a 4KiB NVME page (i.e. preserving the 4KiB page offset from the original allocation). If the original address is not 4KiB-aligned, the allocation will fail because swiotlb_search_pool_area() erroneously compares these unmasked bits with the 64KiB-aligned candidate allocation. Tweak swiotlb_search_pool_area() so that the DMA alignment mask is reduced based on the required alignment of the allocation. Fixes: 82612d66 ("iommu: Allow the dma-iommu api to use bounce buffers") Link: https://lore.kernel.org/r/cover.1707851466.git.nicolinc@nvidia.com Reported-by:
Nicolin Chen <nicolinc@nvidia.com> Signed-off-by:
Will Deacon <will@kernel.org> Reviewed-by:
Michael Kelley <mhklinux@outlook.com> Tested-by:
Nicolin Chen <nicolinc@nvidia.com> Tested-by:
Michael Kelley <mhklinux@outlook.com> Signed-off-by:
Christoph Hellwig <hch@lst.de> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
David Laight authored
[ Upstream commit 80fcac55 ] Patch series "minmax: Relax type checks in min() and max()", v4. The min() (etc) functions in minmax.h require that the arguments have exactly the same types. However when the type check fails, rather than look at the types and fix the type of a variable/constant, everyone seems to jump on min_t(). In reality min_t() ought to be rare - when something unusual is being done, not normality. The orginal min() (added in 2.4.9) replaced several inline functions and included the type - so matched the implicit casting of the function call. This was renamed min_t() in 2.4.10 and the current min() added. There is no actual indication that the conversion of negatve values to large unsigned values has ever been an actual problem. A quick grep shows 5734 min() and 4597 min_t(). Having the casts on almost half of the calls shows that something is clearly wrong. If the wrong type is picked (and it is far too easy to pick the type of the result instead of the larger input) then significant bits can get discarded. Pretty much the worst example is in the derived clamp_val(), consider: unsigned char x = 200u; y = clamp_val(x, 10u, 300u); I also suspect that many of the min_t(u16, ...) are actually wrong. For example copy_data() in printk_ringbuffer.c contains: data_size = min_t(u16, buf_size, len); Here buf_size is 'unsigned int' and len 'u16', pass a 64k buffer (can you prove that doesn't happen?) and no data is returned. Apparantly it did - and has since been fixed. The only reason that most of the min_t() are 'fine' is that pretty much all the values in the kernel are between 0 and INT_MAX. Patch 1 adds umin(), this uses integer promotions to convert both arguments to 'unsigned long long'. It can be used to compare a signed type that is known to contain a non-negative value with an unsigned type. The compiler typically optimises it all away. Added first so that it can be referred to in patch 2. Patch 2 replaces the 'same type' check with a 'same signedness' one. This makes min(unsigned_int_var, sizeof()) be ok. The error message is also improved and will contain the expanded form of both arguments (useful for seeing how constants are defined). Patch 3 just fixes some whitespace. Patch 4 allows comparisons of 'unsigned char' and 'unsigned short' to signed types. The integer promotion rules convert them both to 'signed int' prior to the comparison so they can never cause a negative value be converted to a large positive one. Patch 5 (rewritted for v4) allows comparisons of unsigned values against non-negative constant integer expressions. This makes min(unsigned_int_var, 4) be ok. The only common case that is still errored is the comparison of signed values against unsigned constant integer expressions below __INT_MAX__. Typcally min(int_val, sizeof (foo)), the real fix for this is casting the constant: min(int_var, (int)sizeof (foo)). With all the patches applied pretty much all the min_t() could be replaced by min(), and most of the rest by umin(). However they all need careful inspection due to code like: sz = min_t(unsigned char, sz - 1, LIM - 1) + 1; which converts 0 to LIM. This patch (of 6): umin() and umax() can be used when min()/max() errors a signed v unsigned compare when the signed value is known to be non-negative. Unlike min_t(some_unsigned_type, a, b) umin() will never mask off high bits if an inappropriate type is selected. The '+ 0u + 0ul + 0ull' may look strange. The '+ 0u' is needed for 'signed int' on 64bit systems. The '+ 0ul' is needed for 'signed long' on 32bit systems. The '+ 0ull' is needed for 'signed long long'. Link: https://lkml.kernel.org/r/b97faef60ad24922b530241c5d7c933c@AcuMS.aculab.com Link: https://lkml.kernel.org/r/41d93ca827a248698ec64bf57e0c05a5@AcuMS.aculab.com Signed-off-by:
David Laight <david.laight@aculab.com> Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Jason A. Donenfeld <Jason@zx2c4.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Stable-dep-of: 51b30ecb ("swiotlb: Fix alignment checks when both allocation and DMA masks are present") Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
André Rösti authored
[ Upstream commit fb13b11d ] When a probe is registered at the trace_sys_enter() tracepoint, and that probe changes the system call number, the old system call still gets executed. This worked correctly until commit b6ec4134 ("core/entry: Report syscall correctly for trace and audit"), which removed the re-evaluation of the syscall number after the trace point. Restore the original semantics by re-evaluating the system call number after trace_sys_enter(). The performance impact of this re-evaluation is minimal because it only takes place when a trace point is active, and compared to the actual trace point overhead the read from a cache hot variable is negligible. Fixes: b6ec4134 ("core/entry: Report syscall correctly for trace and audit") Signed-off-by:
André Rösti <an.roesti@gmail.com> Signed-off-by:
Thomas Gleixner <tglx@linutronix.de> Link: https://lore.kernel.org/r/20240311211704.7262-1-an.roesti@gmail.com Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Martin Blumenstingl authored
[ Upstream commit b34b9547 ] The prescaler in the "Global Timer Control Register bit assignments" is documented to use bits [15:8], which means that the maximum prescaler register value is 0xff. Fixes: 171b45a4 ("clocksource/drivers/arm_global_timer: Implement rate compensation whenever source clock changes") Signed-off-by:
Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by:
Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20240218174138.1942418-2-martin.blumenstingl@googlemail.com Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Charan Teja Kalla authored
This fix is applicable for LTS kernel, 6.1.y. In latest kernels, this race issue is fixed by the patch series [1] and [2]. The right thing to do here would have been propagating these changes from latest kernel to the stable branch, 6.1.y. However, these changes seems too intrusive to be picked for stable branches. Hence, the fix proposed can be taken as an alternative instead of backporting the patch series. [1] https://lore.kernel.org/all/0-v8-81230027b2fa+9d-iommu_all_defdom_jgg@nvidia.com/ [2] https://lore.kernel.org/all/0-v5-1b99ae392328+44574-iommu_err_unwind_jgg@nvidia.com/ Issue: A race condition is observed when arm_smmu_device_probe and modprobe of client devices happens in parallel. This results in the allocation of a new default domain for the iommu group even though it was previously allocated and the respective iova domain(iovad) was initialized. However, for this newly allocated default domain, iovad will not be initialized. As a result, for devices requesting dma allocations, this uninitialized iovad will be used, thereby causing NULL pointer dereference issue. Flow: - During arm_smmu_device_probe, bus_iommu_probe() will be called as part of iommu_device_register(). This results in the device probe, __iommu_probe_device(). - When the modprobe of the client device happens in parallel, it sets up the DMA configuration for the device using of_dma_configure_id(), which inturn calls iommu_probe_device(). Later, default domain is allocated and attached using iommu_alloc_default_domain() and __iommu_attach_device() respectively. It then ends up initializing a mapping domain(IOVA domain) and rcaches for the device via arch_setup_dma_ops()->iommu_setup_dma_ops(). - Now, in the bus_iommu_probe() path, it again tries to allocate a default domain via probe_alloc_default_domain(). This results in allocating a new default domain(along with IOVA domain) via __iommu_domain_alloc(). However, this newly allocated IOVA domain will not be initialized. - Now, when the same client device tries dma allocations via iommu_dma_alloc(), it ends up accessing the rcaches of the newly allocated IOVA domain, which is not initialized. This results into NULL pointer dereferencing. Fix this issue by adding a check in probe_alloc_default_domain() to see if the iommu_group already has a default domain allocated and initialized. Cc: <stable@vger.kernel.org> # see patch description, fix applicable only for 6.1.y Signed-off-by:
Charan Teja Kalla <quic_charante@quicinc.com> Co-developed-by:
Nikhil V <quic_nprakash@quicinc.com> Signed-off-by:
Nikhil V <quic_nprakash@quicinc.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Jiawei Wang authored
commit 861b3415 upstream. This reverts commit ed00a694, which added a quirk entry to enable the Yellow Carp (YC) driver for the Lenovo 21J2 laptop. Although the microphone functioned with the YC driver, it resulted in incorrect driver usage. The Lenovo 21J2 is not a Yellow Carp platform, but a Pink Sardine platform, which already has an upstreamed driver. The microphone on the Lenovo 21J2 operates correctly with the CONFIG_SND_SOC_AMD_PS flag enabled and does not require the quirk entry. So this patch removes the quirk entry. Thanks to Mukunda Vijendar [1] for pointing this out. Link: https://lore.kernel.org/linux-sound/023092e1-689c-4b00-b93f-4092c3724fb6@amd.com/ [1] Signed-off-by:
Jiawei Wang <me@jwang.link> Link: https://lore.kernel.org/linux-sound/023092e1-689c-4b00-b93f-4092c3724fb6@amd.com/ [1] Link: https://msgid.link/r/20240313015853.3573242-2-me@jwang.link Signed-off-by:
Mark Brown <broonie@kernel.org> Cc: Luca Stefani <luca.stefani.ge1@gmail.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Jakub Kicinski authored
commit 85905414 upstream. Since we're setting the CRYPTO_TFM_REQ_MAY_BACKLOG flag on our requests to the crypto API, crypto_aead_{encrypt,decrypt} can return -EBUSY instead of -EINPROGRESS in valid situations. For example, when the cryptd queue for AESNI is full (easy to trigger with an artificially low cryptd.cryptd_max_cpu_qlen), requests will be enqueued to the backlog but still processed. In that case, the async callback will also be called twice: first with err == -EINPROGRESS, which it seems we can just ignore, then with err == 0. Compared to Sabrina's original patch this version uses the new tls_*crypt_async_wait() helpers and converts the EBUSY to EINPROGRESS to avoid having to modify all the error handling paths. The handling is identical. Fixes: a54667f6 ("tls: Add support for encryption using async offload accelerator") Fixes: 94524d8f ("net/tls: Add support for async decryption of tls records") Co-developed-by:
Sabrina Dubroca <sd@queasysnail.net> Signed-off-by:
Sabrina Dubroca <sd@queasysnail.net> Link: https://lore.kernel.org/netdev/9681d1febfec295449a62300938ed2ae66983f28.1694018970.git.sd@queasysnail.net/ Signed-off-by:
Jakub Kicinski <kuba@kernel.org> Reviewed-by:
Simon Horman <horms@kernel.org> Signed-off-by:
David S. Miller <davem@davemloft.net> [Srish: v2: fixed hunk failures fixed merge-conflict in stable branch linux-6.1.y, needs to go on top of https://lore.kernel.org/stable/20240307155930.913525-1-lee@kernel.org/ ] Signed-off-by:
Srish Srinivasan <srish.srinivasan@broadcom.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Ard Biesheuvel authored
commit cefcd4fe upstream. Normally, the EFI stub calls into the EFI boot services using the stack that was live when the stub was entered. According to the UEFI spec, this stack needs to be at least 128k in size - this might seem large but all asynchronous processing and event handling in EFI runs from the same stack and so quite a lot of space may be used in practice. In mixed mode, the situation is a bit different: the bootloader calls the 32-bit EFI stub entry point, which calls the decompressor's 32-bit entry point, where the boot stack is set up, using a fixed allocation of 16k. This stack is still in use when the EFI stub is started in 64-bit mode, and so all calls back into the EFI firmware will be using the decompressor's limited boot stack. Due to the placement of the boot stack right after the boot heap, any stack overruns have gone unnoticed. However, commit 5c4feadb ("x86/decompressor: Move global symbol references to C code") moved the definition of the boot heap into C code, and now the boot stack is placed right at the base of BSS, where any overruns will corrupt the end of the .data section. While it would be possible to work around this by increasing the size of the boot stack, doing so would affect all x86 systems, and mixed mode systems are a tiny (and shrinking) fraction of the x86 installed base. So instead, record the firmware stack pointer value when entering from the 32-bit firmware, and switch to this stack every time a EFI boot service call is made. Cc: <stable@kernel.org> # v6.1+ Signed-off-by:
Ard Biesheuvel <ardb@kernel.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Alex Deucher authored
commit 937844d6 upstream. Need to check the offset bits for values greater than 255. v2: also update amdgpu_dm_connector values. Suggested-by:
Mano Ségransan <mano.segransan@protonmail.com> Tested-by:
Mano Ségransan <mano.segransan@protonmail.com> Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3203 Reviewed-by:
Harry Wentland <harry.wentland@amd.com> Signed-off-by:
Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Heiner Kallweit authored
commit ceb013b2 upstream. If registering the platform device fails, the lookup table is removed in the error path. On module removal we would try to remove the lookup table again. Fix this by setting priv->lookup only if registering the platform device was successful. In addition free the memory allocated for the lookup table in the error path. Fixes: d308dfbf ("i2c: mux/i801: Switch to use descriptor passing") Cc: stable@vger.kernel.org Reviewed-by:
Andi Shyti <andi.shyti@kernel.org> Reviewed-by:
Linus Walleij <linus.walleij@linaro.org> Signed-off-by:
Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by:
Andi Shyti <andi.shyti@kernel.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Cosmin Tanislav authored
commit 11dadb63 upstream. As specified in the datasheet, the I2C FIFO data register is 0x18, not 0x42. 0x42 was used by mistake when adapting the ADXL372 driver. Fix this mistake. Fixes: cbab791c ("iio: accel: add ADXL367 driver") Signed-off-by:
Cosmin Tanislav <demonsingur@gmail.com> Reviewed-by:
Nuno Sa <nuno.sa@analog.com> Link: https://lore.kernel.org/r/20240207033657.206171-2-demonsingur@gmail.com Cc: <Stable@vger.kernel.org> Signed-off-by:
Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Cosmin Tanislav authored
commit 1b926914 upstream. regmap_read_poll_timeout() will not sleep before reading, causing the first read to return -ENXIO on I2C, since the chip does not respond to it while it is being reset. The datasheet specifies that a soft reset operation has a latency of 7.5ms. Add a 15ms sleep between reset and reading the DEVID register, and switch to a simple regmap_read() call. Fixes: cbab791c ("iio: accel: add ADXL367 driver") Signed-off-by:
Cosmin Tanislav <demonsingur@gmail.com> Reviewed-by:
Nuno Sa <nuno.sa@analog.com> Link: https://lore.kernel.org/r/20240207033657.206171-1-demonsingur@gmail.com Cc: <Stable@vger.kernel.org> Signed-off-by:
Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Vlastimil Babka authored
commit 803de900 upstream. Sven reports an infinite loop in __alloc_pages_slowpath() for costly order __GFP_RETRY_MAYFAIL allocations that are also GFP_NOIO. Such combination can happen in a suspend/resume context where a GFP_KERNEL allocation can have __GFP_IO masked out via gfp_allowed_mask. Quoting Sven: 1. try to do a "costly" allocation (order > PAGE_ALLOC_COSTLY_ORDER) with __GFP_RETRY_MAYFAIL set. 2. page alloc's __alloc_pages_slowpath tries to get a page from the freelist. This fails because there is nothing free of that costly order. 3. page alloc tries to reclaim by calling __alloc_pages_direct_reclaim, which bails out because a zone is ready to be compacted; it pretends to have made a single page of progress. 4. page alloc tries to compact, but this always bails out early because __GFP_IO is not set (it's not passed by the snd allocator, and even if it were, we are suspending so the __GFP_IO flag would be cleared anyway). 5. page alloc believes reclaim progress was made (because of the pretense in item 3) and so it checks whether it should retry compaction. The compaction retry logic thinks it should try again, because: a) reclaim is needed because of the early bail-out in item 4 b) a zonelist is suitable for compaction 6. goto 2. indefinite stall. (end quote) The immediate root cause is confusing the COMPACT_SKIPPED returned from __alloc_pages_direct_compact() (step 4) due to lack of __GFP_IO to be indicating a lack of order-0 pages, and in step 5 evaluating that in should_compact_retry() as a reason to retry, before incrementing and limiting the number of retries. There are however other places that wrongly assume that compaction can happen while we lack __GFP_IO. To fix this, introduce gfp_compaction_allowed() to abstract the __GFP_IO evaluation and switch the open-coded test in try_to_compact_pages() to use it. Also use the new helper in: - compaction_ready(), which will make reclaim not bail out in step 3, so there's at least one attempt to actually reclaim, even if chances are small for a costly order - in_reclaim_compaction() which will make should_continue_reclaim() return false and we don't over-reclaim unnecessarily - in __alloc_pages_slowpath() to set a local variable can_compact, which is then used to avoid retrying reclaim/compaction for costly allocations (step 5) if we can't compact and also to skip the early compaction attempt that we do in some cases Link: https://lkml.kernel.org/r/20240221114357.13655-2-vbabka@suse.cz Fixes: 3250845d ("Revert "mm, oom: prevent premature OOM killer invocation for high order request"") Signed-off-by:
Vlastimil Babka <vbabka@suse.cz> Reported-by:
Sven van Ashbrook <svenva@chromium.org> Closes: https://lore.kernel.org/all/CAG-rBihs_xMKb3wrMO1%2B-%2Bp4fowP9oy1pa_OTkfxBzPUVOZF%2Bg@mail.gmail.com/ Tested-by:
Karthikeyan Ramasubramanian <kramasub@chromium.org> Cc: Brian Geffon <bgeffon@google.com> Cc: Curtis Malainey <cujomalainey@chromium.org> Cc: Jaroslav Kysela <perex@perex.cz> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Michal Hocko <mhocko@kernel.org> Cc: Takashi Iwai <tiwai@suse.com> Cc: <stable@vger.kernel.org> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Sumit Garg authored
commit 95915ba4 upstream. The error path while failing to register devices on the TEE bus has a bug leading to kernel panic as follows: [ 15.398930] Unable to handle kernel paging request at virtual address ffff07ed00626d7c [ 15.406913] Mem abort info: [ 15.409722] ESR = 0x0000000096000005 [ 15.413490] EC = 0x25: DABT (current EL), IL = 32 bits [ 15.418814] SET = 0, FnV = 0 [ 15.421878] EA = 0, S1PTW = 0 [ 15.425031] FSC = 0x05: level 1 translation fault [ 15.429922] Data abort info: [ 15.432813] ISV = 0, ISS = 0x00000005, ISS2 = 0x00000000 [ 15.438310] CM = 0, WnR = 0, TnD = 0, TagAccess = 0 [ 15.443372] GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0 [ 15.448697] swapper pgtable: 4k pages, 48-bit VAs, pgdp=00000000d9e3e000 [ 15.455413] [ffff07ed00626d7c] pgd=1800000bffdf9003, p4d=1800000bffdf9003, pud=0000000000000000 [ 15.464146] Internal error: Oops: 0000000096000005 [#1] PREEMPT SMP Commit 7269cba5 ("tee: optee: Fix supplicant based device enumeration") lead to the introduction of this bug. So fix it appropriately. Reported-by:
Mikko Rapeli <mikko.rapeli@linaro.org> Closes: https://bugzilla.kernel.org/show_bug.cgi?id=218542 Fixes: 7269cba5 ("tee: optee: Fix supplicant based device enumeration") Cc: stable@vger.kernel.org Signed-off-by:
Sumit Garg <sumit.garg@linaro.org> Signed-off-by:
Jens Wiklander <jens.wiklander@linaro.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Andy Chi authored
commit a17bd44c upstream. The HP EliteBook using ALC236 codec which using 0x02 to control mute LED and 0x01 to control micmute LED. Therefore, add a quirk to make it works. Signed-off-by:
Andy Chi <andy.chi@canonical.com> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20240304134033.773348-1-andy.chi@canonical.com Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Kailang Yang authored
commit 34ab5bbc upstream. It will be enable headset Mic for Acer NB platform. Signed-off-by:
Kailang Yang <kailang@realtek.com> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/fe0eb6661ca240f3b7762b5b3257710d@realtek.com Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Bart Van Assche authored
commit 961ebd12 upstream. The first kiocb_set_cancel_fn() argument may point at a struct kiocb that is not embedded inside struct aio_kiocb. With the current code, depending on the compiler, the req->ki_ctx read happens either before the IOCB_AIO_RW test or after that test. Move the req->ki_ctx read such that it is guaranteed that the IOCB_AIO_RW test happens first. Reported-by:
Eric Biggers <ebiggers@kernel.org> Cc: Benjamin LaHaise <ben@communityfibre.ca> Cc: Eric Biggers <ebiggers@google.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Avi Kivity <avi@scylladb.com> Cc: Sandeep Dhavale <dhavale@google.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Kent Overstreet <kent.overstreet@linux.dev> Cc: stable@vger.kernel.org Fixes: b820de74 ("fs/aio: Restrict kiocb_set_cancel_fn() to I/O submitted via libaio") Signed-off-by:
Bart Van Assche <bvanassche@acm.org> Link: https://lore.kernel.org/r/20240304235715.3790858-1-bvanassche@acm.org Reviewed-by:
Jens Axboe <axboe@kernel.dk> Reviewed-by:
Eric Biggers <ebiggers@google.com> Signed-off-by:
Christian Brauner <brauner@kernel.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Nicolas Pitre authored
commit 1581dafa upstream. This is the same issue that was fixed for the VGA text buffer in commit 39cdb68c ("vt: fix memory overlapping when deleting chars in the buffer"). The cure is also the same i.e. replace memcpy() with memmove() due to the overlaping buffers. Signed-off-by:
Nicolas Pitre <nico@fluxnic.net> Fixes: 81732c3b ("tty vt: Fix line garbage in virtual console on command line edition") Cc: stable <stable@kernel.org> Link: https://lore.kernel.org/r/sn184on2-3p0q-0qrq-0218-895349s4753o@syhkavp.arg Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Alexander Usyskin authored
commit 8436f258 upstream. Add Arrow Lake H device id. Cc: stable@vger.kernel.org Signed-off-by:
Alexander Usyskin <alexander.usyskin@intel.com> Signed-off-by:
Tomas Winkler <tomas.winkler@intel.com> Link: https://lore.kernel.org/r/20240211103912.117105-2-tomas.winkler@intel.com Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Alexander Usyskin authored
commit 7a9b9012 upstream. Add Arrow Lake S device id. Cc: stable@vger.kernel.org Signed-off-by:
Alexander Usyskin <alexander.usyskin@intel.com> Signed-off-by:
Tomas Winkler <tomas.winkler@intel.com> Link: https://lore.kernel.org/r/20240211103912.117105-1-tomas.winkler@intel.com Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Hans de Goede authored
commit ac3e0384 upstream. When not configured for wakeup lis3lv02d_i2c_suspend() will call lis3lv02d_poweroff() even if the device has already been turned off by the runtime-suspend handler and if configured for wakeup and the device is runtime-suspended at this point then it is not turned back on to serve as a wakeup source. Before commit b1b9f7a4 ("misc: lis3lv02d_i2c: Add missing setting of the reg_ctrl callback"), lis3lv02d_poweroff() failed to disable the regulators which as a side effect made calling poweroff() twice ok. Now that poweroff() correctly disables the regulators, doing this twice triggers a WARN() in the regulator core: unbalanced disables for regulator-dummy WARNING: CPU: 1 PID: 92 at drivers/regulator/core.c:2999 _regulator_disable ... Fix lis3lv02d_i2c_suspend() to not call poweroff() a second time if already runtime-suspended and add a poweron() call when necessary to make wakeup work. lis3lv02d_i2c_resume() has similar issues, with an added weirness that it always powers on the device if it is runtime suspended, after which the first runtime-resume will call poweron() again, causing the enabled count for the regulator to increase by 1 every suspend/resume. These unbalanced regulator_enable() calls cause the regulator to never be turned off and trigger the following WARN() on driver unbind: WARNING: CPU: 1 PID: 1724 at drivers/regulator/core.c:2396 _regulator_put Fix this by making lis3lv02d_i2c_resume() mirror the new suspend(). Fixes: b1b9f7a4 ("misc: lis3lv02d_i2c: Add missing setting of the reg_ctrl callback") Reported-by:
Paul Menzel <pmenzel@molgen.mpg.de> Closes: https://lore.kernel.org/regressions/5fc6da74-af0a-4aac-b4d5-a000b39a63a5@molgen.mpg.de/ Cc: stable@vger.kernel.org Cc: regressions@lists.linux.dev Signed-off-by:
Hans de Goede <hdegoede@redhat.com> Tested-by: Paul Menzel <pmenzel@molgen.mpg.de> # Dell XPS 15 7590 Reviewed-by:
Paul Menzel <pmenzel@molgen.mpg.de> Link: https://lore.kernel.org/r/20240220190035.53402-1-hdegoede@redhat.com Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Sherry Sun authored
commit 74cb7e03 upstream. If the remote uart device is not connected or not enabled after booting up, the CTS line is high by default. At this time, if we enable the flow control when opening the device(for example, using “stty -F /dev/ttyLP4 crtscts” command), there will be a pending idle preamble(first writing 0 and then writing 1 to UARTCTRL_TE will queue an idle preamble) that cannot be sent out, resulting in the uart port fail to close(waiting for TX empty), so the user space stty will have to wait for a long time or forever. This is an LPUART IP bug(idle preamble has higher priority than CTS), here add a workaround patch to enable TX CTS after enabling UARTCTRL_TE, so that the idle preamble does not get stuck due to CTS is deasserted. Fixes: 380c966c ("tty: serial: fsl_lpuart: add 32-bit register interface support") Cc: stable <stable@kernel.org> Signed-off-by:
Sherry Sun <sherry.sun@nxp.com> Reviewed-by:
Alexander Sverdlin <alexander.sverdlin@siemens.com> Link: https://lore.kernel.org/r/20240305015706.1050769-1-sherry.sun@nxp.com Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Mathias Nyman authored
commit 69c63350 upstream. Unused USB ports may have bogus location data in ACPI PLD tables. This causes port peering failures as these unused USB2 and USB3 ports location may match. Due to these failures the driver prints a "usb: port power management may be unreliable" warning, and unnecessarily blocks port power off during runtime suspend. This was debugged on a couple DELL systems where the unused ports all returned zeroes in their location data. Similar bugreports exist for other systems. Don't try to peer or match ports that have connect type set to USB_PORT_NOT_USED. Fixes: 3bfd659b ("usb: find internal hub tier mismatch via acpi") Closes: https://bugzilla.kernel.org/show_bug.cgi?id=218465 Closes: https://bugzilla.kernel.org/show_bug.cgi?id=218486 Tested-by:
Paul Menzel <pmenzel@molgen.mpg.de> Link: https://lore.kernel.org/linux-usb/5406d361-f5b7-4309-b0e6-8c94408f7d75@molgen.mpg.de Cc: stable@vger.kernel.org # v3.16+ Signed-off-by:
Mathias Nyman <mathias.nyman@linux.intel.com> Closes: https://bugzilla.kernel.org/show_bug.cgi?id=218490 Link: https://lore.kernel.org/r/20240222233343.71856-1-mathias.nyman@linux.intel.com Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Krishna Kurapati authored
commit f90ce1e0 upstream. While connecting to a Linux host with CDC_NCM_NTB_DEF_SIZE_TX set to 65536, it has been observed that we receive short packets, which come at interval of 5-10 seconds sometimes and have block length zero but still contain 1-2 valid datagrams present. According to the NCM spec: "If wBlockLength = 0x0000, the block is terminated by a short packet. In this case, the USB transfer must still be shorter than dwNtbInMaxSize or dwNtbOutMaxSize. If exactly dwNtbInMaxSize or dwNtbOutMaxSize bytes are sent, and the size is a multiple of wMaxPacketSize for the given pipe, then no ZLP shall be sent. wBlockLength= 0x0000 must be used with extreme care, because of the possibility that the host and device may get out of sync, and because of test issues. wBlockLength = 0x0000 allows the sender to reduce latency by starting to send a very large NTB, and then shortening it when the sender discovers that there’s not sufficient data to justify sending a large NTB" However, there is a potential issue with the current implementation, as it checks for the occurrence of multiple NTBs in a single giveback by verifying if the leftover bytes to be processed is zero or not. If the block length reads zero, we would process the same NTB infintely because the leftover bytes is never zero and it leads to a crash. Fix this by bailing out if block length reads zero. Cc: stable@vger.kernel.org Fixes: 427694cf ("usb: gadget: ncm: Handle decoding of multiple NTB's in unwrap call") Signed-off-by:
Krishna Kurapati <quic_kriskura@quicinc.com> Reviewed-by:
Maciej Żenczykowski <maze@google.com> Link: https://lore.kernel.org/r/20240228115441.2105585-1-quic_kriskura@quicinc.com Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Alan Stern authored
commit 014bcf41 upstream. The isd200 sub-driver in usb-storage uses the HEADS and SECTORS values in the ATA ID information to calculate cylinder and head values when creating a CDB for READ or WRITE commands. The calculation involves division and modulus operations, which will cause a crash if either of these values is 0. While this never happens with a genuine device, it could happen with a flawed or subversive emulation, as reported by the syzbot fuzzer. Protect against this possibility by refusing to bind to the device if either the ATA_ID_HEADS or ATA_ID_SECTORS value in the device's ID information is 0. This requires isd200_Initialization() to return a negative error code when initialization fails; currently it always returns 0 (even when there is an error). Signed-off-by:
Alan Stern <stern@rowland.harvard.edu> Reported-and-tested-by:
<syzbot+28748250ab47a8f04100@syzkaller.appspotmail.com> Link: https://lore.kernel.org/linux-usb/0000000000003eb868061245ba7f@google.com/ Fixes: 1da177e4 ("Linux-2.6.12-rc2") Cc: stable@vger.kernel.org Reviewed-by:
PrasannaKumar Muralidharan <prasannatsmkumar@gmail.com> Reviewed-by:
Martin K. Petersen <martin.petersen@oracle.com> Link: https://lore.kernel.org/r/b1e605ea-333f-4ac0-9511-da04f411763e@rowland.harvard.edu Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Kailang Yang authored
commit d397b6e5 upstream. Headset Mic will no show at resume back. This patch will fix this issue. Fixes: d7f32791 ("ALSA: hda/realtek - Add headset Mic support for Lenovo ALC897 platform") Cc: <stable@vger.kernel.org> Signed-off-by:
Kailang Yang <kailang@realtek.com> Link: https://lore.kernel.org/r/4713d48a372e47f98bba0c6120fd8254@realtek.com Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Nirmoy Das authored
commit 01bb1ae3 upstream. Error in mmu_interval_notifier_insert() can leave a NULL notifier.mm pointer. Catch that and return early. Fixes: ed29c269 ("drm/i915: Fix userptr so we do not have to worry about obj->mm.lock, v7.") Cc: <stable@vger.kernel.org> # v5.13+ [tursulin: Added Fixes and cc stable.] Cc: Andi Shyti <andi.shyti@linux.intel.com> Cc: Shawn Lee <shawn.c.lee@intel.com> Signed-off-by:
Nirmoy Das <nirmoy.das@intel.com> Reviewed-by:
Rodrigo Vivi <rodrigo.vivi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240219125047.28906-1-nirmoy.das@intel.com Signed-off-by:
Tvrtko Ursulin <tvrtko.ursulin@intel.com> (cherry picked from commit db7bbd13 ) Signed-off-by:
Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Ma Jun authored
commit 0dafaf65 upstream. Fix the pwm_mode value error which used for pwm1_enable setting Signed-off-by:
Ma Jun <Jun.Ma2@amd.com> Reviewed-by:
Lijo Lazar <lijo.lazar@amd.com> Signed-off-by:
Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Steven Rostedt (Google) authored
commit e5d7c191 upstream. The .release() function does not get called until all readers of a file descriptor are finished. If a thread is blocked on reading a file descriptor in ring_buffer_wait(), and another thread closes the file descriptor, it will not wake up the other thread as ring_buffer_wake_waiters() is called by .release(), and that will not get called until the .read() is finished. The issue originally showed up in trace-cmd, but the readers are actually other processes with their own file descriptors. So calling close() would wake up the other tasks because they are blocked on another descriptor then the one that was closed(). But there's other wake ups that solve that issue. When a thread is blocked on a read, it can still hang even when another thread closed its descriptor. This is what the .flush() callback is for. Have the .flush() wake up the readers. Link: https://lore.kernel.org/linux-trace-kernel/20240308202432.107909457@goodmis.org Cc: stable@vger.kernel.org Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: linke li <lilinke99@qq.com> Cc: Rabin Vincent <rabin@rab.in> Fixes: f3ddb74a ("tracing: Wake up ring buffer waiters on closing of the file") Signed-off-by:
Steven Rostedt (Google) <rostedt@goodmis.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Sean Christopherson authored
commit 5ef1d8c1 upstream. Do the cache flush of converted pages in svm_register_enc_region() before dropping kvm->lock to fix use-after-free issues where region and/or its array of pages could be freed by a different task, e.g. if userspace has __unregister_enc_region_locked() already queued up for the region. Note, the "obvious" alternative of using local variables doesn't fully resolve the bug, as region->pages is also dynamically allocated. I.e. the region structure itself would be fine, but region->pages could be freed. Flushing multiple pages under kvm->lock is unfortunate, but the entire flow is a rare slow path, and the manual flush is only needed on CPUs that lack coherency for encrypted memory. Fixes: 19a23da5 ("Fix unsynchronized access to sev members through svm_register_enc_region") Reported-by:
Gabe Kirkpatrick <gkirkpatrick@google.com> Cc: Josh Eads <josheads@google.com> Cc: Peter Gonda <pgonda@google.com> Cc: stable@vger.kernel.org Signed-off-by:
Sean Christopherson <seanjc@google.com> Message-Id: <20240217013430.2079561-1-seanjc@google.com> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Sean Christopherson authored
commit 910c57df upstream. When emulating an atomic access on behalf of the guest, mark the target gfn dirty if the CMPXCHG by KVM is attempted and doesn't fault. This fixes a bug where KVM effectively corrupts guest memory during live migration by writing to guest memory without informing userspace that the page is dirty. Marking the page dirty got unintentionally dropped when KVM's emulated CMPXCHG was converted to do a user access. Before that, KVM explicitly mapped the guest page into kernel memory, and marked the page dirty during the unmap phase. Mark the page dirty even if the CMPXCHG fails, as the old data is written back on failure, i.e. the page is still written. The value written is guaranteed to be the same because the operation is atomic, but KVM's ABI is that all writes are dirty logged regardless of the value written. And more importantly, that's what KVM did before the buggy commit. Huge kudos to the folks on the Cc list (and many others), who did all the actual work of triaging and debugging. Fixes: 1c2361f6 ("KVM: x86: Use __try_cmpxchg_user() to emulate atomic accesses") Cc: stable@vger.kernel.org Cc: David Matlack <dmatlack@google.com> Cc: Pasha Tatashin <tatashin@google.com> Cc: Michael Krebs <mkrebs@google.com> base-commit: 6769ea8da8a93ed4630f1ce64df6aafcaabfce64 Reviewed-by:
Jim Mattson <jmattson@google.com> Link: https://lore.kernel.org/r/20240215010004.1456078-2-seanjc@google.com Signed-off-by:
Sean Christopherson <seanjc@google.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-