Commits · 61eab651f6e96791cfad6db45f1107c398699b2d · Mirrors / git.kernel.org / pub_scm_linux_kernel_git_stable_linux

Jul 27, 2023

net/mlx5: fs_chains: Fix ft prio if ignore_flow_level is not supported · 61eab651

Chris Mi authored Jul 17, 2023

The cited commit sets ft prio to fs_base_prio. But if
ignore_flow_level it not supported, ft prio must be set based on
tc filter prio. Otherwise, all the ft prio are the same on the same
chain. It is invalid if ignore_flow_level is not supported.

Fix it by setting ft prio based on tc filter prio and setting
fs_base_prio to 0 for fdb.

Fixes: 8e80e564

 ("net/mlx5: fs_chains: Refactor to detach chains from tc usage")
Signed-off-by: Chris Mi <cmi@nvidia.com>
Reviewed-by: Paul Blakey <paulb@nvidia.com>
Reviewed-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

61eab651

net/mlx5e: kTLS, Fix protection domain in use syndrome when devlink reload · 3e4cf1dd

Jianbo Liu authored May 08, 2023

There are DEK objects cached in DEK pool after kTLS is used, and they
are freed only in mlx5e_ktls_cleanup().

mlx5e_destroy_mdev_resources() is called in mlx5e_suspend() to
free mdev resources, including protection domain (PD). However, PD is
still referenced by the cached DEK objects in this case, because
profile->cleanup() (and therefore mlx5e_ktls_cleanup()) is called
after mlx5e_suspend() during devlink reload. So the following FW
syndrome is generated:

 mlx5_cmd_out_err:803:(pid 12948): DEALLOC_PD(0x801) op_mod(0x0) failed,
    status bad resource state(0x9), syndrome (0xef0c8a), err(-22)

To avoid this syndrome, move DEK pool destruction to
mlx5e_ktls_cleanup_tx(), which is called by profile->cleanup_tx(). And
move pool creation to mlx5e_ktls_init_tx() for symmetry.

Fixes: f741db1a

 ("net/mlx5e: kTLS, Improve connection rate by using fast update encryption key")
Signed-off-by: Jianbo Liu <jianbol@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

3e4cf1dd

net/mlx5: Bridge, set debugfs access right to root-only · eb02b93a

Vlad Buslov authored Jun 27, 2023

As suggested during code review set the access rights for bridge 'fdb'
debugfs file to root-only.

Fixes: 791eb782

 ("net/mlx5: Bridge, expose FDB state via debugfs")
Reported-by: Jakub Kicinski <kuba@kernel.org>
Link: https://lore.kernel.org/netdev/20230619120515.5045132a@kernel.org/


Signed-off-by: Vlad Buslov <vladbu@nvidia.com>
Reviewed-by: Gal Pressman <gal@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

eb02b93a

net/mlx5e: xsk: Fix crash on regular rq reactivation · 39646d9b

Dragos Tatulea authored Apr 24, 2023

When the regular rq is reactivated after the XSK socket is closed
it could be reading stale cqes which eventually corrupts the rq.
This leads to no more traffic being received on the regular rq and a
crash on the next close or deactivation of the rq.

Kal Cuttler Conely reported this issue as a crash on the release
path when the xdpsock sample program is stopped (killed) and restarted
in sequence while traffic is running.

This patch flushes all cqes when during the rq flush. The cqe flushing
is done in the reset state of the rq. mlx5e_rq_to_ready code is moved
into the flush function to allow for this.

Fixes: 082a9edf

 ("net/mlx5e: xsk: Flush RQ on XSK activation to save memory")
Reported-by: Kal Cutter Conley <kal.conley@dectris.com>
Closes: https://lore.kernel.org/xdp-newbies/CAHApi-nUAs4TeFWUDV915CZJo07XVg2Vp63-no7UDfj6wur9nQ@mail.gmail.com


Signed-off-by: Dragos Tatulea <dtatulea@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

39646d9b

net/mlx5e: xsk: Fix invalid buffer access for legacy rq · e0f52298

Dragos Tatulea authored Jul 18, 2023

The below crash can be encountered when using xdpsock in rx mode for
legacy rq: the buffer gets released in the XDP_REDIRECT path, and then
once again in the driver. This fix sets the flag to avoid releasing on
the driver side.

XSK handling of buffers for legacy rq was relying on the caller to set
the skip release flag. But the referenced fix started using fragment
counts for pages instead of the skip flag.

Crash log:
 general protection fault, probably for non-canonical address 0xffff8881217e3a: 0000 [#1] SMP
 CPU: 0 PID: 14 Comm: ksoftirqd/0 Not tainted 6.5.0-rc1+ #31
 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014
 RIP: 0010:bpf_prog_03b13f331978c78c+0xf/0x28
 Code:  ...
 RSP: 0018:ffff88810082fc98 EFLAGS: 00010246
 RAX: 0000000000000000 RBX: ffff888138404901 RCX: c0ffffc900027cbc
 RDX: ffffffffa000b514 RSI: 00ffff8881217e32 RDI: ffff888138404901
 RBP: ffff88810082fc98 R08: 0000000000091100 R09: 0000000000000006
 R10: 0000000000000800 R11: 0000000000000800 R12: ffffc9000027a000
 R13: ffff8881217e2dc0 R14: ffff8881217e2910 R15: ffff8881217e2f00
 FS:  0000000000000000(0000) GS:ffff88852c800000(0000) knlGS:0000000000000000
 CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
 CR2: 0000564cb2e2cde0 CR3: 000000010e603004 CR4: 0000000000370eb0
 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
 Call Trace:
  <TASK>
  ? die_addr+0x32/0x80
  ? exc_general_protection+0x192/0x390
  ? asm_exc_general_protection+0x22/0x30
  ? 0xffffffffa000b514
  ? bpf_prog_03b13f331978c78c+0xf/0x28
  mlx5e_xdp_handle+0x48/0x670 [mlx5_core]
  ? dev_gro_receive+0x3b5/0x6e0
  mlx5e_xsk_skb_from_cqe_linear+0x6e/0x90 [mlx5_core]
  mlx5e_handle_rx_cqe+0x55/0x100 [mlx5_core]
  mlx5e_poll_rx_cq+0x87/0x6e0 [mlx5_core]
  mlx5e_napi_poll+0x45e/0x6b0 [mlx5_core]
  __napi_poll+0x25/0x1a0
  net_rx_action+0x28a/0x300
  __do_softirq+0xcd/0x279
  ? sort_range+0x20/0x20
  run_ksoftirqd+0x1a/0x20
  smpboot_thread_fn+0xa2/0x130
  kthread+0xc9/0xf0
  ? kthread_complete_and_exit+0x20/0x20
  ret_from_fork+0x1f/0x30
  </TASK>
 Modules linked in: mlx5_ib mlx5_core rpcrdma rdma_ucm ib_iser libiscsi scsi_transport_iscsi ib_umad rdma_cm ib_ipoib iw_cm ib_cm ib_uverbs ib_core xt_conntrack xt_MASQUERADE nf_conntrack_netlink nfnetlink xt_addrtype iptable_nat nf_nat br_netfilter overlay zram zsmalloc fuse [last unloaded: mlx5_core]
 ---[ end trace 0000000000000000 ]---

Fixes: 7abd955a

 ("net/mlx5e: RX, Fix page_pool page fragment tracking for XDP")
Signed-off-by: Dragos Tatulea <dtatulea@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

e0f52298

net/mlx5e: Move representor neigh cleanup to profile cleanup_tx · d03b6e6f

Jianbo Liu authored Jul 03, 2023

For IP tunnel encapsulation in ECMP (Equal-Cost Multipath) mode, as
the flow is duplicated to the peer eswitch, the related neighbour
information on the peer uplink representor is created as well.

In the cited commit, eswitch devcom unpair is moved to uplink unload
API, specifically the profile->cleanup_tx. If there is a encap rule
offloaded in ECMP mode, when one eswitch does unpair (because of
unloading the driver, for instance), and the peer rule from the peer
eswitch is going to be deleted, the use-after-free error is triggered
while accessing neigh info, as it is already cleaned up in uplink's
profile->disable, which is before its profile->cleanup_tx.

To fix this issue, move the neigh cleanup to profile's cleanup_tx
callback, and after mlx5e_cleanup_uplink_rep_tx is called. The neigh
init is moved to init_tx for symmeter.

[ 2453.376299] BUG: KASAN: slab-use-after-free in mlx5e_rep_neigh_entry_release+0x109/0x3a0 [mlx5_core]
[ 2453.379125] Read of size 4 at addr ffff888127af9008 by task modprobe/2496

[ 2453.381542] CPU: 7 PID: 2496 Comm: modprobe Tainted: G    B              6.4.0-rc7+ #15
[ 2453.383386] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014
[ 2453.384335] Call Trace:
[ 2453.384625]  <TASK>
[ 2453.384891]  dump_stack_lvl+0x33/0x50
[ 2453.385285]  print_report+0xc2/0x610
[ 2453.385667]  ? __virt_addr_valid+0xb1/0x130
[ 2453.386091]  ? mlx5e_rep_neigh_entry_release+0x109/0x3a0 [mlx5_core]
[ 2453.386757]  kasan_report+0xae/0xe0
[ 2453.387123]  ? mlx5e_rep_neigh_entry_release+0x109/0x3a0 [mlx5_core]
[ 2453.387798]  mlx5e_rep_neigh_entry_release+0x109/0x3a0 [mlx5_core]
[ 2453.388465]  mlx5e_rep_encap_entry_detach+0xa6/0xe0 [mlx5_core]
[ 2453.389111]  mlx5e_encap_dealloc+0xa7/0x100 [mlx5_core]
[ 2453.389706]  mlx5e_tc_tun_encap_dests_unset+0x61/0xb0 [mlx5_core]
[ 2453.390361]  mlx5_free_flow_attr_actions+0x11e/0x340 [mlx5_core]
[ 2453.391015]  ? complete_all+0x43/0xd0
[ 2453.391398]  ? free_flow_post_acts+0x38/0x120 [mlx5_core]
[ 2453.392004]  mlx5e_tc_del_fdb_flow+0x4ae/0x690 [mlx5_core]
[ 2453.392618]  mlx5e_tc_del_fdb_peers_flow+0x308/0x370 [mlx5_core]
[ 2453.393276]  mlx5e_tc_clean_fdb_peer_flows+0xf5/0x140 [mlx5_core]
[ 2453.393925]  mlx5_esw_offloads_unpair+0x86/0x540 [mlx5_core]
[ 2453.394546]  ? mlx5_esw_offloads_set_ns_peer.isra.0+0x180/0x180 [mlx5_core]
[ 2453.395268]  ? down_write+0xaa/0x100
[ 2453.395652]  mlx5_esw_offloads_devcom_event+0x203/0x530 [mlx5_core]
[ 2453.396317]  mlx5_devcom_send_event+0xbb/0x190 [mlx5_core]
[ 2453.396917]  mlx5_esw_offloads_devcom_cleanup+0xb0/0xd0 [mlx5_core]
[ 2453.397582]  mlx5e_tc_esw_cleanup+0x42/0x120 [mlx5_core]
[ 2453.398182]  mlx5e_rep_tc_cleanup+0x15/0x30 [mlx5_core]
[ 2453.398768]  mlx5e_cleanup_rep_tx+0x6c/0x80 [mlx5_core]
[ 2453.399367]  mlx5e_detach_netdev+0xee/0x120 [mlx5_core]
[ 2453.399957]  mlx5e_netdev_change_profile+0x84/0x170 [mlx5_core]
[ 2453.400598]  mlx5e_vport_rep_unload+0xe0/0xf0 [mlx5_core]
[ 2453.403781]  mlx5_eswitch_unregister_vport_reps+0x15e/0x190 [mlx5_core]
[ 2453.404479]  ? mlx5_eswitch_register_vport_reps+0x200/0x200 [mlx5_core]
[ 2453.405170]  ? up_write+0x39/0x60
[ 2453.405529]  ? kernfs_remove_by_name_ns+0xb7/0xe0
[ 2453.405985]  auxiliary_bus_remove+0x2e/0x40
[ 2453.406405]  device_release_driver_internal+0x243/0x2d0
[ 2453.406900]  ? kobject_put+0x42/0x2d0
[ 2453.407284]  bus_remove_device+0x128/0x1d0
[ 2453.407687]  device_del+0x240/0x550
[ 2453.408053]  ? waiting_for_supplier_show+0xe0/0xe0
[ 2453.408511]  ? kobject_put+0xfa/0x2d0
[ 2453.408889]  ? __kmem_cache_free+0x14d/0x280
[ 2453.409310]  mlx5_rescan_drivers_locked.part.0+0xcd/0x2b0 [mlx5_core]
[ 2453.409973]  mlx5_unregister_device+0x40/0x50 [mlx5_core]
[ 2453.410561]  mlx5_uninit_one+0x3d/0x110 [mlx5_core]
[ 2453.411111]  remove_one+0x89/0x130 [mlx5_core]
[ 2453.411628]  pci_device_remove+0x59/0xf0
[ 2453.412026]  device_release_driver_internal+0x243/0x2d0
[ 2453.412511]  ? parse_option_str+0x14/0x90
[ 2453.412915]  driver_detach+0x7b/0xf0
[ 2453.413289]  bus_remove_driver+0xb5/0x160
[ 2453.413685]  pci_unregister_driver+0x3f/0xf0
[ 2453.414104]  mlx5_cleanup+0xc/0x20 [mlx5_core]

Fixes: 2be5bd42

 ("net/mlx5: Handle pairing of E-switch via uplink un/load APIs")
Signed-off-by: Jianbo Liu <jianbol@nvidia.com>
Reviewed-by: Vlad Buslov <vladbu@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

d03b6e6f

net/mlx5e: Fix crash moving to switchdev mode when ntuple offload is set · 3ec43c1b

Amir Tzin authored May 30, 2023

Moving to switchdev mode with ntuple offload on causes the kernel to
crash since fs->arfs is freed during nic profile cleanup flow.

Ntuple offload is not supported in switchdev mode and it is already
unset by mlx5 fix feature ndo in switchdev mode. Verify fs->arfs is
valid before disabling it.

trace:
[] RIP: 0010:_raw_spin_lock_bh+0x17/0x30
[] arfs_del_rules+0x44/0x1a0 [mlx5_core]
[] mlx5e_arfs_disable+0xe/0x20 [mlx5_core]
[] mlx5e_handle_feature+0x3d/0xb0 [mlx5_core]
[] ? __rtnl_unlock+0x25/0x50
[] mlx5e_set_features+0xfe/0x160 [mlx5_core]
[] __netdev_update_features+0x278/0xa50
[] ? netdev_run_todo+0x5e/0x2a0
[] netdev_update_features+0x22/0x70
[] ? _cond_resched+0x15/0x30
[] mlx5e_attach_netdev+0x12a/0x1e0 [mlx5_core]
[] mlx5e_netdev_attach_profile+0xa1/0xc0 [mlx5_core]
[] mlx5e_netdev_change_profile+0x77/0xe0 [mlx5_core]
[] mlx5e_vport_rep_load+0x1ed/0x290 [mlx5_core]
[] mlx5_esw_offloads_rep_load+0x88/0xd0 [mlx5_core]
[] esw_offloads_load_rep.part.38+0x31/0x50 [mlx5_core]
[] esw_offloads_enable+0x6c5/0x710 [mlx5_core]
[] mlx5_eswitch_enable_locked+0x1bb/0x290 [mlx5_core]
[] mlx5_devlink_eswitch_mode_set+0x14f/0x320 [mlx5_core]
[] devlink_nl_cmd_eswitch_set_doit+0x94/0x120
[] genl_family_rcv_msg_doit.isra.17+0x113/0x150
[] genl_family_rcv_msg+0xb7/0x170
[] ? devlink_nl_cmd_port_split_doit+0x100/0x100
[] genl_rcv_msg+0x47/0xa0
[] ? genl_family_rcv_msg+0x170/0x170
[] netlink_rcv_skb+0x4c/0x130
[] genl_rcv+0x24/0x40
[] netlink_unicast+0x19a/0x230
[] netlink_sendmsg+0x204/0x3d0
[] sock_sendmsg+0x50/0x60

Fixes: 90b22b9b

 ("net/mlx5e: Disable Rx ntuple offload for uplink representor")
Signed-off-by: Amir Tzin <amirtz@nvidia.com>
Reviewed-by: Aya Levin <ayal@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

3ec43c1b

net/mlx5e: Don't hold encap tbl lock if there is no encap action · 93a33193

Chris Mi authored Jun 29, 2023

The cited commit holds encap tbl lock unconditionally when setting
up dests. But it may cause the following deadlock:

 PID: 1063722  TASK: ffffa062ca5d0000  CPU: 13   COMMAND: "handler8"
  #0 [ffffb14de05b7368] __schedule at ffffffffa1d5aa91
  #1 [ffffb14de05b7410] schedule at ffffffffa1d5afdb
  #2 [ffffb14de05b7430] schedule_preempt_disabled at ffffffffa1d5b528
  #3 [ffffb14de05b7440] __mutex_lock at ffffffffa1d5d6cb
  #4 [ffffb14de05b74e8] mutex_lock_nested at ffffffffa1d5ddeb
  #5 [ffffb14de05b74f8] mlx5e_tc_tun_encap_dests_set at ffffffffc12f2096 [mlx5_core]
  #6 [ffffb14de05b7568] post_process_attr at ffffffffc12d9fc5 [mlx5_core]
  #7 [ffffb14de05b75a0] mlx5e_tc_add_fdb_flow at ffffffffc12de877 [mlx5_core]
  #8 [ffffb14de05b75f0] __mlx5e_add_fdb_flow at ffffffffc12e0eef [mlx5_core]
  #9 [ffffb14de05b7660] mlx5e_tc_add_flow at ffffffffc12e12f7 [mlx5_core]
 #10 [ffffb14de05b76b8] mlx5e_configure_flower at ffffffffc12e1686 [mlx5_core]
 #11 [ffffb14de05b7720] mlx5e_rep_indr_offload at ffffffffc12e3817 [mlx5_core]
 #12 [ffffb14de05b7730] mlx5e_rep_indr_setup_tc_cb at ffffffffc12e388a [mlx5_core]
 #13 [ffffb14de05b7740] tc_setup_cb_add at ffffffffa1ab2ba8
 #14 [ffffb14de05b77a0] fl_hw_replace_filter at ffffffffc0bdec2f [cls_flower]
 #15 [ffffb14de05b7868] fl_change at ffffffffc0be6caa [cls_flower]
 #16 [ffffb14de05b7908] tc_new_tfilter at ffffffffa1ab71f0

[1031218.028143]  wait_for_completion+0x24/0x30
[1031218.028589]  mlx5e_update_route_decap_flows+0x9a/0x1e0 [mlx5_core]
[1031218.029256]  mlx5e_tc_fib_event_work+0x1ad/0x300 [mlx5_core]
[1031218.029885]  process_one_work+0x24e/0x510

Actually no need to hold encap tbl lock if there is no encap action.
Fix it by checking if encap action exists or not before holding
encap tbl lock.

Fixes: 37c3b9fa

 ("net/mlx5e: Prevent encap offload when neigh update is running")
Signed-off-by: Chris Mi <cmi@nvidia.com>
Reviewed-by: Vlad Buslov <vladbu@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

93a33193

net/mlx5: Honor user input for migratable port fn attr · 0507f2c8

Shay Drory authored Jul 03, 2023

Currently, whenever a user is setting migratable port fn attr, the
driver is always turn migratable capability on.
Fix it by honor the user input

Fixes: e5b9642a

 ("net/mlx5: E-Switch, Implement devlink port function cmds to control migratable")
Signed-off-by: Shay Drory <shayd@nvidia.com>
Reviewed-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

0507f2c8

net/mlx5e: fix return value check in mlx5e_ipsec_remove_trailer() · e5bcb756

Yuanjun Gong authored Jul 25, 2023

mlx5e_ipsec_remove_trailer() should return an error code if function
pskb_trim() returns an unexpected value.

Fixes: 2ac9cfe7

 ("net/mlx5e: IPSec, Add Innova IPSec offload TX data path")
Signed-off-by: Yuanjun Gong <ruc_gongyuanjun@163.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

e5bcb756

net/mlx5: fix potential memory leak in mlx5e_init_rep_rx · c6cf0b60

Zhengchao Shao authored Jul 08, 2023

The memory pointed to by the priv->rx_res pointer is not freed in the error
path of mlx5e_init_rep_rx, which can lead to a memory leak. Fix by freeing
the memory in the error path, thereby making the error path identical to
mlx5e_cleanup_rep_rx().

Fixes: af8bbf73

 ("net/mlx5e: Convert mlx5e_flow_steering member of mlx5e_priv to pointer")
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

c6cf0b60

net/mlx5: DR, fix memory leak in mlx5dr_cmd_create_reformat_ctx · 5dd77585

Zhengchao Shao authored Jul 05, 2023

when mlx5_cmd_exec failed in mlx5dr_cmd_create_reformat_ctx, the memory
pointed by 'in' is not released, which will cause memory leak. Move memory
release after mlx5_cmd_exec.

Fixes: 1d918647

 ("net/mlx5: DR, Add direct rule command utilities")
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

5dd77585

net/mlx5e: fix double free in macsec_fs_tx_create_crypto_table_groups · aeb66017

Zhengchao Shao authored Jul 04, 2023

In function macsec_fs_tx_create_crypto_table_groups(), when the ft->g
memory is successfully allocated but the 'in' memory fails to be
allocated, the memory pointed to by ft->g is released once. And in function
macsec_fs_tx_create(), macsec_fs_tx_destroy() is called to release the
memory pointed to by ft->g again. This will cause double free problem.

Fixes: e467b283

 ("net/mlx5e: Add MACsec TX steering rules")
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

aeb66017

Merge branch 'tools-ynl-gen-fix-parse-multi-attr-enum-attribute' · fa29d467

Jakub Kicinski authored Jul 26, 2023

Arkadiusz Kubalewski says:

====================
tools: ynl-gen: fix parse multi-attr enum attribute

Fix the issues with parsing enums in ynl.py script.
====================

Link: https://lore.kernel.org/r/20230725101642.267248-1-arkadiusz.kubalewski@intel.com


Signed-off-by: Jakub Kicinski <kuba@kernel.org>

fa29d467

tools: ynl-gen: fix parse multi-attr enum attribute · df15c15e

Arkadiusz Kubalewski authored Jul 25, 2023



When attribute is enum type and marked as multi-attr, the netlink
respond is not parsed, fails with stack trace:
Traceback (most recent call last):
  File "/net-next/tools/net/ynl/./test.py", line 520, in <module>
    main()
  File "/net-next/tools/net/ynl/./test.py", line 488, in main
    dplls=dplls_get(282574471561216)
  File "/net-next/tools/net/ynl/./test.py", line 48, in dplls_get
    reply=act(args)
  File "/net-next/tools/net/ynl/./test.py", line 41, in act
    reply = ynl.dump(args.dump, attrs)
  File "/net-next/tools/net/ynl/lib/ynl.py", line 598, in dump
    return self._op(method, vals, dump=True)
  File "/net-next/tools/net/ynl/lib/ynl.py", line 584, in _op
    rsp_msg = self._decode(gm.raw_attrs, op.attr_set.name)
  File "/net-next/tools/net/ynl/lib/ynl.py", line 451, in _decode
    self._decode_enum(rsp, attr_spec)
  File "/net-next/tools/net/ynl/lib/ynl.py", line 408, in _decode_enum
    value = enum.entries_by_val[raw].name
TypeError: unhashable type: 'list'
error: 1

Redesign _decode_enum(..) to take a enum int value and translate
it to either a bitmask or enum name as expected.

Signed-off-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com>
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Link: https://lore.kernel.org/r/20230725101642.267248-3-arkadiusz.kubalewski@intel.com


Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

df15c15e

tools: ynl-gen: fix enum index in _decode_enum(..) · d7ddf5f4

Arkadiusz Kubalewski authored Jul 25, 2023

Remove wrong index adjustment, which is leftover from adding
support for sparse enums.
enum.entries_by_val() function shall not subtract the start-value, as
it is indexed with real enum value.

Fixes: c311aaa7

 ("tools: ynl: fix enum-as-flags in the generic CLI")
Signed-off-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com>
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Link: https://lore.kernel.org/r/20230725101642.267248-2-arkadiusz.kubalewski@intel.com


Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

d7ddf5f4

Jul 26, 2023

igc: Fix Kernel Panic during ndo_tx_timeout callback · d4a7ce64

Muhammad Husaini Zulkifli authored Jul 24, 2023

The Xeon validation group has been carrying out some loaded tests
with various HW configurations, and they have seen some transmit
queue time out happening during the test. This will cause the
reset adapter function to be called by igc_tx_timeout().
Similar race conditions may arise when the interface is being brought
down and up in igc_reinit_locked(), an interrupt being generated, and
igc_clean_tx_irq() being called to complete the TX.

When the igc_tx_timeout() function is invoked, this patch will turn
off all TX ring HW queues during igc_down() process. TX ring HW queues
will be activated again during the igc_configure_tx_ring() process
when performing the igc_up() procedure later.

This patch also moved existing igc_disable_tx_ring_hw() to avoid using
forward declaration.

Kernel trace:
[ 7678.747813] ------------[ cut here ]------------
[ 7678.757914] NETDEV WATCHDOG: enp1s0 (igc): transmit queue 2 timed out
[ 7678.770117] WARNING: CPU: 0 PID: 13 at net/sched/sch_generic.c:525 dev_watchdog+0x1ae/0x1f0
[ 7678.784459] Modules linked in: xt_conntrack nft_chain_nat xt_MASQUERADE xt_addrtype nft_compat
nf_tables nfnetlink br_netfilter bridge stp llc overlay dm_mod emrcha(PO) emriio(PO) rktpm(PO)
cegbuf_mod(PO) patch_update(PO) se(PO) sgx_tgts(PO) mktme(PO) keylocker(PO) svtdx(PO) svfs_pci_hotplug(PO)
vtd_mod(PO) davemem(PO) svmabort(PO) svindexio(PO) usbx2(PO) ehci_sched(PO) svheartbeat(PO) ioapic(PO)
sv8259(PO) svintr(PO) lt(PO) pcierootport(PO) enginefw_mod(PO) ata(PO) smbus(PO) spiflash_cdf(PO) arden(PO)
dsa_iax(PO) oobmsm_punit(PO) cpm(PO) svkdb(PO) ebg_pch(PO) pch(PO) sviotargets(PO) svbdf(PO) svmem(PO)
svbios(PO) dram(PO) svtsc(PO) targets(PO) superio(PO) svkernel(PO) cswitch(PO) mcf(PO) pentiumIII_mod(PO)
fs_svfs(PO) mdevdefdb(PO) svfs_os_services(O) ixgbe mdio mdio_devres libphy emeraldrapids_svdefs(PO)
regsupport(O) libnvdimm nls_cp437 snd_hda_codec_realtek snd_hda_codec_generic ledtrig_audio snd_hda_intel
snd_intel_dspcfg snd_hda_codec snd_hwdep x86_pkg_temp_thermal snd_hda_core snd_pcm snd_timer isst_if_mbox_pci
[ 7678.784496]  input_leds isst_if_mmio sg snd isst_if_common soundcore wmi button sad9(O) drm fuse backlight
configfs efivarfs ip_tables x_tables vmd sdhci led_class rtl8150 r8152 hid_generic pegasus mmc_block usbhid
mmc_core hid megaraid_sas ixgb igb i2c_algo_bit ice i40e hpsa scsi_transport_sas e1000e e1000 e100 ax88179_178a
usbnet xhci_pci sd_mod xhci_hcd t10_pi crc32c_intel crc64_rocksoft igc crc64 crc_t10dif usbcore
crct10dif_generic ptp crct10dif_common usb_common pps_core
[ 7679.200403] RIP: 0010:dev_watchdog+0x1ae/0x1f0
[ 7679.210201] Code: 28 e9 53 ff ff ff 4c 89 e7 c6 05 06 42 b9 00 01 e8 17 d1 fb ff 44 89 e9 4c
89 e6 48 c7 c7 40 ad fb 81 48 89 c2 e8 52 62 82 ff <0f> 0b e9 72 ff ff ff 65 8b 05 80 7d 7c 7e
89 c0 48 0f a3 05 0a c1
[ 7679.245438] RSP: 0018:ffa00000001f7d90 EFLAGS: 00010282
[ 7679.256021] RAX: 0000000000000000 RBX: ff11000109938440 RCX: 0000000000000000
[ 7679.268710] RDX: ff11000361e26cd8 RSI: ff11000361e1b880 RDI: ff11000361e1b880
[ 7679.281314] RBP: ffa00000001f7da8 R08: ff1100035f8fffe8 R09: 0000000000027ffb
[ 7679.293840] R10: 0000000000001f0a R11: ff1100035f840000 R12: ff11000109938000
[ 7679.306276] R13: 0000000000000002 R14: dead000000000122 R15: ffa00000001f7e18
[ 7679.318648] FS:  0000000000000000(0000) GS:ff11000361e00000(0000) knlGS:0000000000000000
[ 7679.332064] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 7679.342757] CR2: 00007ffff7fca168 CR3: 000000013b08a006 CR4: 0000000000471ef8
[ 7679.354984] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 7679.367207] DR3: 0000000000000000 DR6: 00000000fffe07f0 DR7: 0000000000000400
[ 7679.379370] PKRU: 55555554
[ 7679.386446] Call Trace:
[ 7679.393152]  <TASK>
[ 7679.399363]  ? __pfx_dev_watchdog+0x10/0x10
[ 7679.407870]  call_timer_fn+0x31/0x110
[ 7679.415698]  expire_timers+0xb2/0x120
[ 7679.423403]  run_timer_softirq+0x179/0x1e0
[ 7679.431532]  ? __schedule+0x2b1/0x820
[ 7679.439078]  __do_softirq+0xd1/0x295
[ 7679.446426]  ? __pfx_smpboot_thread_fn+0x10/0x10
[ 7679.454867]  run_ksoftirqd+0x22/0x30
[ 7679.462058]  smpboot_thread_fn+0xb7/0x160
[ 7679.469670]  kthread+0xcd/0xf0
[ 7679.476097]  ? __pfx_kthread+0x10/0x10
[ 7679.483211]  ret_from_fork+0x29/0x50
[ 7679.490047]  </TASK>
[ 7679.495204] ---[ end trace 0000000000000000 ]---
[ 7679.503179] igc 0000:01:00.0 enp1s0: Register Dump
[ 7679.511230] igc 0000:01:00.0 enp1s0: Register Name   Value
[ 7679.519892] igc 0000:01:00.0 enp1s0: CTRL            181c0641
[ 7679.528782] igc 0000:01:00.0 enp1s0: STATUS          40280683
[ 7679.537551] igc 0000:01:00.0 enp1s0: CTRL_EXT        10000040
[ 7679.546284] igc 0000:01:00.0 enp1s0: MDIC            180a3800
[ 7679.554942] igc 0000:01:00.0 enp1s0: ICR             00000081
[ 7679.563503] igc 0000:01:00.0 enp1s0: RCTL            04408022
[ 7679.571963] igc 0000:01:00.0 enp1s0: RDLEN[0-3]      00001000 00001000 00001000 00001000
[ 7679.583075] igc 0000:01:00.0 enp1s0: RDH[0-3]        00000068 000000b6 0000000f 00000031
[ 7679.594162] igc 0000:01:00.0 enp1s0: RDT[0-3]        00000066 000000b2 0000000e 00000030
[ 7679.605174] igc 0000:01:00.0 enp1s0: RXDCTL[0-3]     02040808 02040808 02040808 02040808
[ 7679.616196] igc 0000:01:00.0 enp1s0: RDBAL[0-3]      1bb7c000 1bb7f000 1bb82000 0ef33000
[ 7679.627242] igc 0000:01:00.0 enp1s0: RDBAH[0-3]      00000001 00000001 00000001 00000001
[ 7679.638256] igc 0000:01:00.0 enp1s0: TCTL            a503f0fa
[ 7679.646607] igc 0000:01:00.0 enp1s0: TDBAL[0-3]      2ba4a000 1bb6f000 1bb74000 1bb79000
[ 7679.657609] igc 0000:01:00.0 enp1s0: TDBAH[0-3]      00000001 00000001 00000001 00000001
[ 7679.668551] igc 0000:01:00.0 enp1s0: TDLEN[0-3]      00001000 00001000 00001000 00001000
[ 7679.679470] igc 0000:01:00.0 enp1s0: TDH[0-3]        000000a7 0000002d 000000bf 000000d9
[ 7679.690406] igc 0000:01:00.0 enp1s0: TDT[0-3]        000000a7 0000002d 000000bf 000000d9
[ 7679.701264] igc 0000:01:00.0 enp1s0: TXDCTL[0-3]     02100108 02100108 02100108 02100108
[ 7679.712123] igc 0000:01:00.0 enp1s0: Reset adapter
[ 7683.085967] igc 0000:01:00.0 enp1s0: NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX
[ 8086.945561] ------------[ cut here ]------------
Entering kdb (current=0xffffffff8220b200, pid 0) on processor 0
Oops: (null) due to oops @ 0xffffffff81573888
RIP: 0010:dql_completed+0x148/0x160
Code: c9 00 48 89 57 58 e9 46 ff ff ff 45 85 e4 41 0f 95 c4 41 39 db 0f 95
c1 41 84 cc 74 05 45 85 ed 78 0a 44 89 c1 e9 27 ff ff ff <0f> 0b 01 f6 44 89
c1 29 f1 0f 48 ca eb 8c cc cc cc cc cc cc cc cc
RSP: 0018:ffa0000000003e00 EFLAGS: 00010287
RAX: 000000000000006c RBX: ffa0000003eb0f78 RCX: ff11000109938000
RDX: 0000000000000003 RSI: 0000000000000160 RDI: ff110001002e9480
RBP: ffa0000000003ed8 R08: ff110001002e93c0 R09: ffa0000000003d28
R10: 0000000000007cc0 R11: 0000000000007c54 R12: 00000000ffffffd9
R13: ff1100037039cb00 R14: 00000000ffffffd9 R15: ff1100037039c048
FS:  0000000000000000(0000) GS:ff11000361e00000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007ffff7fca168 CR3: 000000013b08a003 CR4: 0000000000471ef8
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe07f0 DR7: 0000000000000400
PKRU: 55555554
Call Trace:
 <IRQ>
 ? igc_poll+0x1a9/0x14d0 [igc]
 __napi_poll+0x2e/0x1b0
 net_rx_action+0x126/0x250
 __do_softirq+0xd1/0x295
 irq_exit_rcu+0xc5/0xf0
 common_interrupt+0x86/0xa0
 </IRQ>
 <TASK>
 asm_common_interrupt+0x27/0x40
RIP: 0010:cpuidle_enter_state+0xd3/0x3e0
Code: 73 f1 ff ff 49 89 c6 8b 05 e2 ca a7 00 85 c0 0f 8f b3 02 00 00 31 ff e8 1b
de 75 ff 80 7d d7 00 0f 85 cd 01 00 00 fb 45 85 ff <0f> 88 fd 00 00 00 49 63 cf
4c 2b 75 c8 48 8d 04 49 48 89 ca 48 8d
RSP: 0018:ffffffff82203df0 EFLAGS: 00000202
RAX: ff11000361e2a200 RBX: 0000000000000002 RCX: 000000000000001f
RDX: 0000000000000000 RSI: 000000003cf3cf3d RDI: 0000000000000000
RBP: ffffffff82203e28 R08: 0000075ae38471c8 R09: 0000000000000018
R10: 000000000000031a R11: ffffffff8238dca0 R12: ffd1ffffff200000
R13: ffffffff8238dca0 R14: 0000075ae38471c8 R15: 0000000000000002
 cpuidle_enter+0x2e/0x50
 call_cpuidle+0x23/0x40
 do_idle+0x1be/0x220
 cpu_startup_entry+0x20/0x30
 rest_init+0xb5/0xc0
 arch_call_rest_init+0xe/0x30
 start_kernel+0x448/0x760
 x86_64_start_kernel+0x109/0x150
 secondary_startup_64_no_verify+0xe0/0xeb
 </TASK>
more>
[0]kdb>

[0]kdb>
[0]kdb> go
Catastrophic error detected
kdb_continue_catastrophic=0, type go a second time if you really want to
continue
[0]kdb> go
Catastrophic error detected
kdb_continue_catastrophic=0, attempting to continue
[ 8086.955689] refcount_t: underflow; use-after-free.
[ 8086.955697] WARNING: CPU: 0 PID: 0 at lib/refcount.c:28 refcount_warn_saturate+0xc2/0x110
[ 8086.955706] Modules linked in: xt_conntrack nft_chain_nat xt_MASQUERADE xt_addrtype nft_compat
nf_tables nfnetlink br_netfilter bridge stp llc overlay dm_mod emrcha(PO) emriio(PO) rktpm(PO)
cegbuf_mod(PO) patch_update(PO) se(PO) sgx_tgts(PO) mktme(PO) keylocker(PO) svtdx(PO)
svfs_pci_hotplug(PO) vtd_mod(PO) davemem(PO) svmabort(PO) svindexio(PO) usbx2(PO) ehci_sched(PO)
svheartbeat(PO) ioapic(PO) sv8259(PO) svintr(PO) lt(PO) pcierootport(PO) enginefw_mod(PO) ata(PO)
smbus(PO) spiflash_cdf(PO) arden(PO) dsa_iax(PO) oobmsm_punit(PO) cpm(PO) svkdb(PO) ebg_pch(PO)
pch(PO) sviotargets(PO) svbdf(PO) svmem(PO) svbios(PO) dram(PO) svtsc(PO) targets(PO) superio(PO)
svkernel(PO) cswitch(PO) mcf(PO) pentiumIII_mod(PO) fs_svfs(PO) mdevdefdb(PO) svfs_os_services(O)
ixgbe mdio mdio_devres libphy emeraldrapids_svdefs(PO) regsupport(O) libnvdimm nls_cp437
snd_hda_codec_realtek snd_hda_codec_generic ledtrig_audio snd_hda_intel snd_intel_dspcfg
snd_hda_codec snd_hwdep x86_pkg_temp_thermal snd_hda_core snd_pcm snd_timer isst_if_mbox_pci
[ 8086.955751]  input_leds isst_if_mmio sg snd isst_if_common soundcore wmi button sad9(O) drm
fuse backlight configfs efivarfs ip_tables x_tables vmd sdhci led_class rtl8150 r8152 hid_generic
pegasus mmc_block usbhid mmc_core hid megaraid_sas ixgb igb i2c_algo_bit ice i40e hpsa
scsi_transport_sas e1000e e1000 e100 ax88179_178a usbnet xhci_pci sd_mod xhci_hcd t10_pi
crc32c_intel crc64_rocksoft igc crc64 crc_t10dif usbcore crct10dif_generic ptp crct10dif_common
usb_common pps_core
[ 8086.955784] RIP: 0010:refcount_warn_saturate+0xc2/0x110
[ 8086.955788] Code: 01 e8 82 e7 b4 ff 0f 0b 5d c3 cc cc cc cc 80 3d 68 c6 eb 00 00 75 81
48 c7 c7 a0 87 f6 81 c6 05 58 c6 eb 00 01 e8 5e e7 b4 ff <0f> 0b 5d c3 cc cc cc cc 80 3d
42 c6 eb 00 00 0f 85 59 ff ff ff 48
[ 8086.955790] RSP: 0018:ffa0000000003da0 EFLAGS: 00010286
[ 8086.955793] RAX: 0000000000000000 RBX: ff1100011da40ee0 RCX: ff11000361e1b888
[ 8086.955794] RDX: 00000000ffffffd8 RSI: 0000000000000027 RDI: ff11000361e1b880
[ 8086.955795] RBP: ffa0000000003da0 R08: 80000000ffff9f45 R09: ffa0000000003d28
[ 8086.955796] R10: ff1100035f840000 R11: 0000000000000028 R12: ff11000319ff8000
[ 8086.955797] R13: ff1100011bb79d60 R14: 00000000ffffffd6 R15: ff1100037039cb00
[ 8086.955798] FS:  0000000000000000(0000) GS:ff11000361e00000(0000) knlGS:0000000000000000
[ 8086.955800] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 8086.955801] CR2: 00007ffff7fca168 CR3: 000000013b08a003 CR4: 0000000000471ef8
[ 8086.955803] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 8086.955803] DR3: 0000000000000000 DR6: 00000000fffe07f0 DR7: 0000000000000400
[ 8086.955804] PKRU: 55555554
[ 8086.955805] Call Trace:
[ 8086.955806]  <IRQ>
[ 8086.955808]  tcp_wfree+0x112/0x130
[ 8086.955814]  skb_release_head_state+0x24/0xa0
[ 8086.955818]  napi_consume_skb+0x9c/0x160
[ 8086.955821]  igc_poll+0x5d8/0x14d0 [igc]
[ 8086.955835]  __napi_poll+0x2e/0x1b0
[ 8086.955839]  net_rx_action+0x126/0x250
[ 8086.955843]  __do_softirq+0xd1/0x295
[ 8086.955846]  irq_exit_rcu+0xc5/0xf0
[ 8086.955851]  common_interrupt+0x86/0xa0
[ 8086.955857]  </IRQ>
[ 8086.955857]  <TASK>
[ 8086.955858]  asm_common_interrupt+0x27/0x40
[ 8086.955862] RIP: 0010:cpuidle_enter_state+0xd3/0x3e0
[ 8086.955866] Code: 73 f1 ff ff 49 89 c6 8b 05 e2 ca a7 00 85 c0 0f 8f b3 02 00 00 31 ff e8
1b de 75 ff 80 7d d7 00 0f 85 cd 01 00 00 fb 45 85 ff <0f> 88 fd 00 00 00 49 63 cf 4c 2b 75
c8 48 8d 04 49 48 89 ca 48 8d
[ 8086.955867] RSP: 0018:ffffffff82203df0 EFLAGS: 00000202
[ 8086.955869] RAX: ff11000361e2a200 RBX: 0000000000000002 RCX: 000000000000001f
[ 8086.955870] RDX: 0000000000000000 RSI: 000000003cf3cf3d RDI: 0000000000000000
[ 8086.955871] RBP: ffffffff82203e28 R08: 0000075ae38471c8 R09: 0000000000000018
[ 8086.955872] R10: 000000000000031a R11: ffffffff8238dca0 R12: ffd1ffffff200000
[ 8086.955873] R13: ffffffff8238dca0 R14: 0000075ae38471c8 R15: 0000000000000002
[ 8086.955875]  cpuidle_enter+0x2e/0x50
[ 8086.955880]  call_cpuidle+0x23/0x40
[ 8086.955884]  do_idle+0x1be/0x220
[ 8086.955887]  cpu_startup_entry+0x20/0x30
[ 8086.955889]  rest_init+0xb5/0xc0
[ 8086.955892]  arch_call_rest_init+0xe/0x30
[ 8086.955895]  start_kernel+0x448/0x760
[ 8086.955898]  x86_64_start_kernel+0x109/0x150
[ 8086.955900]  secondary_startup_64_no_verify+0xe0/0xeb
[ 8086.955904]  </TASK>
[ 8086.955904] ---[ end trace 0000000000000000 ]---
[ 8086.955912] ------------[ cut here ]------------
[ 8086.955913] kernel BUG at lib/dynamic_queue_limits.c:27!
[ 8086.955918] invalid opcode: 0000 [#1] SMP
[ 8086.955922] RIP: 0010:dql_completed+0x148/0x160
[ 8086.955925] Code: c9 00 48 89 57 58 e9 46 ff ff ff 45 85 e4 41 0f 95 c4 41 39 db
0f 95 c1 41 84 cc 74 05 45 85 ed 78 0a 44 89 c1 e9 27 ff ff ff <0f> 0b 01 f6 44 89
c1 29 f1 0f 48 ca eb 8c cc cc cc cc cc cc cc cc
[ 8086.955927] RSP: 0018:ffa0000000003e00 EFLAGS: 00010287
[ 8086.955928] RAX: 000000000000006c RBX: ffa0000003eb0f78 RCX: ff11000109938000
[ 8086.955929] RDX: 0000000000000003 RSI: 0000000000000160 RDI: ff110001002e9480
[ 8086.955930] RBP: ffa0000000003ed8 R08: ff110001002e93c0 R09: ffa0000000003d28
[ 8086.955931] R10: 0000000000007cc0 R11: 0000000000007c54 R12: 00000000ffffffd9
[ 8086.955932] R13: ff1100037039cb00 R14: 00000000ffffffd9 R15: ff1100037039c048
[ 8086.955933] FS:  0000000000000000(0000) GS:ff11000361e00000(0000) knlGS:0000000000000000
[ 8086.955934] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 8086.955935] CR2: 00007ffff7fca168 CR3: 000000013b08a003 CR4: 0000000000471ef8
[ 8086.955936] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 8086.955937] DR3: 0000000000000000 DR6: 00000000fffe07f0 DR7: 0000000000000400
[ 8086.955938] PKRU: 55555554
[ 8086.955939] Call Trace:
[ 8086.955939]  <IRQ>
[ 8086.955940]  ? igc_poll+0x1a9/0x14d0 [igc]
[ 8086.955949]  __napi_poll+0x2e/0x1b0
[ 8086.955952]  net_rx_action+0x126/0x250
[ 8086.955956]  __do_softirq+0xd1/0x295
[ 8086.955958]  irq_exit_rcu+0xc5/0xf0
[ 8086.955961]  common_interrupt+0x86/0xa0
[ 8086.955964]  </IRQ>
[ 8086.955965]  <TASK>
[ 8086.955965]  asm_common_interrupt+0x27/0x40
[ 8086.955968] RIP: 0010:cpuidle_enter_state+0xd3/0x3e0
[ 8086.955971] Code: 73 f1 ff ff 49 89 c6 8b 05 e2 ca a7 00 85 c0 0f 8f b3 02 00 00
31 ff e8 1b de 75 ff 80 7d d7 00 0f 85 cd 01 00 00 fb 45 85 ff <0f> 88 fd 00 00 00
49 63 cf 4c 2b 75 c8 48 8d 04 49 48 89 ca 48 8d
[ 8086.955972] RSP: 0018:ffffffff82203df0 EFLAGS: 00000202
[ 8086.955973] RAX: ff11000361e2a200 RBX: 0000000000000002 RCX: 000000000000001f
[ 8086.955974] RDX: 0000000000000000 RSI: 000000003cf3cf3d RDI: 0000000000000000
[ 8086.955974] RBP: ffffffff82203e28 R08: 0000075ae38471c8 R09: 0000000000000018
[ 8086.955975] R10: 000000000000031a R11: ffffffff8238dca0 R12: ffd1ffffff200000
[ 8086.955976] R13: ffffffff8238dca0 R14: 0000075ae38471c8 R15: 0000000000000002
[ 8086.955978]  cpuidle_enter+0x2e/0x50
[ 8086.955981]  call_cpuidle+0x23/0x40
[ 8086.955984]  do_idle+0x1be/0x220
[ 8086.955985]  cpu_startup_entry+0x20/0x30
[ 8086.955987]  rest_init+0xb5/0xc0
[ 8086.955990]  arch_call_rest_init+0xe/0x30
[ 8086.955992]  start_kernel+0x448/0x760
[ 8086.955994]  x86_64_start_kernel+0x109/0x150
[ 8086.955996]  secondary_startup_64_no_verify+0xe0/0xeb
[ 8086.955998]  </TASK>
[ 8086.955999] Modules linked in: xt_conntrack nft_chain_nat xt_MASQUERADE xt_addrtype
nft_compat nf_tables nfnetlink br_netfilter bridge stp llc overlay dm_mod emrcha(PO) emriio(PO)
rktpm(PO) cegbuf_mod(PO) patch_update(PO) se(PO) sgx_tgts(PO) mktme(PO) keylocker(PO) svtdx(PO)
svfs_pci_hotplug(PO) vtd_mod(PO) davemem(PO) svmabort(PO) svindexio(PO) usbx2(PO) ehci_sched(PO)
svheartbeat(PO) ioapic(PO) sv8259(PO) svintr(PO) lt(PO) pcierootport(PO) enginefw_mod(PO) ata(PO)
smbus(PO) spiflash_cdf(PO) arden(PO) dsa_iax(PO) oobmsm_punit(PO) cpm(PO) svkdb(PO) ebg_pch(PO)
pch(PO) sviotargets(PO) svbdf(PO) svmem(PO) svbios(PO) dram(PO) svtsc(PO) targets(PO) superio(PO)
svkernel(PO) cswitch(PO) mcf(PO) pentiumIII_mod(PO) fs_svfs(PO) mdevdefdb(PO) svfs_os_services(O)
ixgbe mdio mdio_devres libphy emeraldrapids_svdefs(PO) regsupport(O) libnvdimm nls_cp437
snd_hda_codec_realtek snd_hda_codec_generic ledtrig_audio snd_hda_intel snd_intel_dspcfg
snd_hda_codec snd_hwdep x86_pkg_temp_thermal snd_hda_core snd_pcm snd_timer isst_if_mbox_pci
[ 8086.956029]  input_leds isst_if_mmio sg snd isst_if_common soundcore wmi button sad9(O) drm
fuse backlight configfs efivarfs ip_tables x_tables vmd sdhci led_class rtl8150 r8152 hid_generic
pegasus mmc_block usbhid mmc_core hid megaraid_sas ixgb igb i2c_algo_bit ice i40e hpsa
scsi_transport_sas e1000e e1000 e100 ax88179_178a usbnet xhci_pci sd_mod xhci_hcd t10_pi
crc32c_intel crc64_rocksoft igc crc64 crc_t10dif usbcore crct10dif_generic ptp crct10dif_common
usb_common pps_core
[16762.543675] INFO: NMI handler (kgdb_nmi_handler) took too long to run: 8675587.593 msecs
[16762.543678] INFO: NMI handler (kgdb_nmi_handler) took too long to run: 8675587.595 msecs
[16762.543673] INFO: NMI handler (kgdb_nmi_handler) took too long to run: 8675587.495 msecs
[16762.543679] INFO: NMI handler (kgdb_nmi_handler) took too long to run: 8675587.599 msecs
[16762.543678] INFO: NMI handler (kgdb_nmi_handler) took too long to run: 8675587.598 msecs
[16762.543690] INFO: NMI handler (kgdb_nmi_handler) took too long to run: 8675587.605 msecs
[16762.543684] INFO: NMI handler (kgdb_nmi_handler) took too long to run: 8675587.599 msecs
[16762.543693] INFO: NMI handler (kgdb_nmi_handler) took too long to run: 8675587.613 msecs
[16762.543784] ---[ end trace 0000000000000000 ]---
[16762.849099] RIP: 0010:dql_completed+0x148/0x160
PANIC: Fatal exception in interrupt

Fixes: 9b275176

 ("igc: Add ndo_tx_timeout support")
Tested-by: Alejandra Victoria Alcaraz <alejandra.victoria.alcaraz@intel.com>
Signed-off-by: Muhammad Husaini Zulkifli <muhammad.husaini.zulkifli@intel.com>
Acked-by: Sasha Neftin <sasha.neftin@intel.com>
Tested-by: Naama Meir <naamax.meir@linux.intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

d4a7ce64

net: dsa: qca8k: fix mdb add/del case with 0 VID · dfd739f1

Christian Marangi authored Jul 24, 2023

The qca8k switch doesn't support using 0 as VID and require a default
VID to be always set. MDB add/del function doesn't currently handle
this and are currently setting the default VID.

Fix this by correctly handling this corner case and internally use the
default VID for VID 0 case.

Fixes: ba8f870d

 ("net: dsa: qca8k: add support for mdb_add/del")
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: David S. Miller <davem@davemloft.net>

dfd739f1

net: dsa: qca8k: fix broken search_and_del · ae70dcb9

Christian Marangi authored Jul 24, 2023

On deleting an MDB entry for a port, fdb_search_and_del is used.
An FDB entry can't be modified so it needs to be deleted and readded
again with the new portmap (and the port deleted as requested)

We use the SEARCH operator to search the entry to edit by vid and mac
address and then we check the aging if we actually found an entry.

Currently the code suffer from a bug where the searched fdb entry is
never read again with the found values (if found) resulting in the code
always returning -EINVAL as aging was always 0.

Fix this by correctly read the fdb entry after it was searched.

Fixes: ba8f870d

 ("net: dsa: qca8k: add support for mdb_add/del")
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: David S. Miller <davem@davemloft.net>

ae70dcb9

net: dsa: qca8k: fix search_and_insert wrong handling of new rule · 80248d41

Christian Marangi authored Jul 24, 2023

On inserting a mdb entry, fdb_search_and_insert is used to add a port to
the qca8k target entry in the FDB db.

A FDB entry can't be modified so it needs to be removed and insert again
with the new values.

To detect if an entry already exist, the SEARCH operation is used and we
check the aging of the entry. If the entry is not 0, the entry exist and
we proceed to delete it.

Current code have 2 main problem:
- The condition to check if the FDB entry exist is wrong and should be
  the opposite.
- When a FDB entry doesn't exist, aging was never actually set to the
  STATIC value resulting in allocating an invalid entry.

Fix both problem by adding aging support to the function, calling the
function with STATIC as aging by default and finally by correct the
condition to check if the entry actually exist.

Fixes: ba8f870d

 ("net: dsa: qca8k: add support for mdb_add/del")
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: David S. Miller <davem@davemloft.net>

80248d41

net: dsa: qca8k: enable use_single_write for qca8xxx · 2c39dd02

Christian Marangi authored Jul 24, 2023

The qca8xxx switch supports 2 way to write reg values, a slow way using
mdio and a fast way by sending specially crafted mgmt packet to
read/write reg.

The fast way can support up to 32 bytes of data as eth packet are used
to send/receive.

This correctly works for almost the entire regmap of the switch but with
the use of some kernel selftests for dsa drivers it was found a funny
and interesting hw defect/limitation.

For some specific reg, bulk write won't work and will result in writing
only part of the requested regs resulting in half data written. This was
especially hard to track and discover due to the total strangeness of
the problem and also by the specific regs where this occurs.

This occurs in the specific regs of the ATU table, where multiple entry
needs to be written to compose the entire entry.
It was discovered that with a bulk write of 12 bytes on
QCA8K_REG_ATU_DATA0 only QCA8K_REG_ATU_DATA0 and QCA8K_REG_ATU_DATA2
were written, but QCA8K_REG_ATU_DATA1 was always zero.
Tcpdump was used to make sure the specially crafted packet was correct
and this was confirmed.

The problem was hard to track as the lack of QCA8K_REG_ATU_DATA1
resulted in an entry somehow possible as the first bytes of the mac
address are set in QCA8K_REG_ATU_DATA0 and the entry type is set in
QCA8K_REG_ATU_DATA2.

Funlly enough writing QCA8K_REG_ATU_DATA1 results in the same problem
with QCA8K_REG_ATU_DATA2 empty and QCA8K_REG_ATU_DATA1 and
QCA8K_REG_ATU_FUNC correctly written.
A speculation on the problem might be that there are some kind of
indirection internally when accessing these regs and they can't be
accessed all together, due to the fact that it's really a table mapped
somewhere in the switch SRAM.

Even more funny is the fact that every other reg was tested with all
kind of combination and they are not affected by this problem. Read
operation was also tested and always worked so it's not affected by this
problem.

The problem is not present if we limit writing a single reg at times.

To handle this hardware defect, enable use_single_write so that bulk
api can correctly split the write in multiple different operation
effectively reverting to a non-bulk write.

Cc: Mark Brown <broonie@kernel.org>
Fixes: c766e077

 ("net: dsa: qca8k: convert to regmap read/write API")
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: David S. Miller <davem@davemloft.net>

2c39dd02

net: ipa: only reset hashed tables when supported · e11ec2b8

Alex Elder authored Jul 24, 2023

Last year, the code that manages GSI channel transactions switched
from using spinlock-protected linked lists to using indexes into the
ring buffer used for a channel.  Recently, Google reported seeing
transaction reference count underflows occasionally during shutdown.

Doug Anderson found a way to reproduce the issue reliably, and
bisected the issue to the commit that eliminated the linked lists
and the lock.  The root cause was ultimately determined to be
related to unused transactions being committed as part of the modem
shutdown cleanup activity.  Unused transactions are not normally
expected (except in error cases).

The modem uses some ranges of IPA-resident memory, and whenever it
shuts down we zero those ranges.  In ipa_filter_reset_table() a
transaction is allocated to zero modem filter table entries.  If
hashing is not supported, hashed table memory should not be zeroed.
But currently nothing prevents that, and the result is an unused
transaction.  Something similar occurs when we zero routing table
entries for the modem.

By preventing any attempt to clear hashed tables when hashing is not
supported, the reference count underflow is avoided in this case.

Note that there likely remains an issue with properly freeing unused
transactions (if they occur due to errors).  This patch addresses
only the underflows that Google originally reported.

Cc: <stable@vger.kernel.org> # 6.1.x
Fixes: d338ae28

 ("net: ipa: kill all other transaction lists")
Tested-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Alex Elder <elder@linaro.org>
Link: https://lore.kernel.org/r/20230724224055.1688854-1-elder@linaro.org


Signed-off-by: Jakub Kicinski <kuba@kernel.org>

e11ec2b8

Merge branch 'net-fix-error-warning-by-fstrict-flex-arrays-3' · a49441c9

Jakub Kicinski authored Jul 25, 2023

Kuniyuki Iwashima says:

====================
net: Fix error/warning by -fstrict-flex-arrays=3.

df8fc4e9 ("kbuild: Enable -fstrict-flex-arrays=3") started applying
strict rules for standard string functions (strlen(), memcpy(), etc.) if
CONFIG_FORTIFY_SOURCE=y.

This series fixes two false positives caught by syzkaller.

v2: https://lore.kernel.org/netdev/20230720004410.87588-1-kuniyu@amazon.com/
v1: https://lore.kernel.org/netdev/20230719185322.44255-1-kuniyu@amazon.com/
====================

Link: https://lore.kernel.org/r/20230724213425.22920-1-kuniyu@amazon.com


Signed-off-by: Jakub Kicinski <kuba@kernel.org>

a49441c9

af_packet: Fix warning of fortified memcpy() in packet_getname(). · a0ade840

Kuniyuki Iwashima authored Jul 24, 2023

syzkaller found a warning in packet_getname() [0], where we try to
copy 16 bytes to sockaddr_ll.sll_addr[8].

Some devices (ip6gre, vti6, ip6tnl) have 16 bytes address expressed
by struct in6_addr.  Also, Infiniband has 32 bytes as MAX_ADDR_LEN.

The write seems to overflow, but actually not since we use struct
sockaddr_storage defined in __sys_getsockname() and its size is 128
(_K_SS_MAXSIZE) bytes.  Thus, we have sufficient room after sll_addr[]
as __data[].

To avoid the warning, let's add a flex array member union-ed with
sll_addr.

Another option would be to use strncpy() and limit the copied length
to sizeof(sll_addr), but it will return the partial address and break
an application that passes sockaddr_storage to getsockname().

[0]:
memcpy: detected field-spanning write (size 16) of single field "sll->sll_addr" at net/packet/af_packet.c:3604 (size 8)
WARNING: CPU: 0 PID: 255 at net/packet/af_packet.c:3604 packet_getname+0x25c/0x3a0 net/packet/af_packet.c:3604
Modules linked in:
CPU: 0 PID: 255 Comm: syz-executor750 Not tainted 6.5.0-rc1-00330-g60cc1f7d0605 #4
Hardware name: linux,dummy-virt (DT)
pstate: 60400005 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : packet_getname+0x25c/0x3a0 net/packet/af_packet.c:3604
lr : packet_getname+0x25c/0x3a0 net/packet/af_packet.c:3604
sp : ffff800089887bc0
x29: ffff800089887bc0 x28: ffff000010f80f80 x27: 0000000000000003
x26: dfff800000000000 x25: ffff700011310f80 x24: ffff800087d55000
x23: dfff800000000000 x22: ffff800089887c2c x21: 0000000000000010
x20: ffff00000de08310 x19: ffff800089887c20 x18: ffff800086ab1630
x17: 20646c6569662065 x16: 6c676e697320666f x15: 0000000000000001
x14: 1fffe0000d56d7ca x13: 0000000000000000 x12: 0000000000000000
x11: 0000000000000000 x10: 0000000000000000 x9 : 3e60944c3da92b00
x8 : 3e60944c3da92b00 x7 : 0000000000000001 x6 : 0000000000000001
x5 : ffff8000898874f8 x4 : ffff800086ac99e0 x3 : ffff8000803f8808
x2 : 0000000000000001 x1 : 0000000100000000 x0 : 0000000000000000
Call trace:
 packet_getname+0x25c/0x3a0 net/packet/af_packet.c:3604
 __sys_getsockname+0x168/0x24c net/socket.c:2042
 __do_sys_getsockname net/socket.c:2057 [inline]
 __se_sys_getsockname net/socket.c:2054 [inline]
 __arm64_sys_getsockname+0x7c/0x94 net/socket.c:2054
 __invoke_syscall arch/arm64/kernel/syscall.c:38 [inline]
 invoke_syscall+0x98/0x2c0 arch/arm64/kernel/syscall.c:52
 el0_svc_common+0x134/0x240 arch/arm64/kernel/syscall.c:139
 do_el0_svc+0x64/0x198 arch/arm64/kernel/syscall.c:188
 el0_svc+0x2c/0x7c arch/arm64/kernel/entry-common.c:647
 el0t_64_sync_handler+0x84/0xfc arch/arm64/kernel/entry-common.c:665
 el0t_64_sync+0x190/0x194 arch/arm64/kernel/entry.S:591

Fixes: df8fc4e9

 ("kbuild: Enable -fstrict-flex-arrays=3")
Reported-by: syzkaller <syzkaller@googlegroups.com>
Suggested-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://lore.kernel.org/r/20230724213425.22920-3-kuniyu@amazon.com


Reviewed-by: Simon Horman <simon.horman@corigine.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

a0ade840

af_unix: Fix fortify_panic() in unix_bind_bsd(). · 06d4c8a8

Kuniyuki Iwashima authored Jul 24, 2023

syzkaller found a bug in unix_bind_bsd() [0].  We can reproduce it
by bind()ing a socket on a path with length 108.

108 is the size of sun_addr of struct sockaddr_un and is the maximum
valid length for the pathname socket.  When calling bind(), we use
struct sockaddr_storage as the actual buffer size, so terminating
sun_addr[108] with null is legitimate as done in unix_mkname_bsd().

However, strlen(sunaddr) for such a case causes fortify_panic() if
CONFIG_FORTIFY_SOURCE=y.  __fortify_strlen() has no idea about the
actual buffer size and see the string as unterminated.

Let's use strnlen() to allow sun_addr to be unterminated at 107.

[0]:
detected buffer overflow in __fortify_strlen
kernel BUG at lib/string_helpers.c:1031!
Internal error: Oops - BUG: 00000000f2000800 [#1] PREEMPT SMP
Modules linked in:
CPU: 0 PID: 255 Comm: syz-executor296 Not tainted 6.5.0-rc1-00330-g60cc1f7d0605 #4
Hardware name: linux,dummy-virt (DT)
pstate: 60400005 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : fortify_panic+0x1c/0x20 lib/string_helpers.c:1030
lr : fortify_panic+0x1c/0x20 lib/string_helpers.c:1030
sp : ffff800089817af0
x29: ffff800089817af0 x28: ffff800089817b40 x27: 1ffff00011302f68
x26: 000000000000006e x25: 0000000000000012 x24: ffff800087e60140
x23: dfff800000000000 x22: ffff800089817c20 x21: ffff800089817c8e
x20: 000000000000006c x19: ffff00000c323900 x18: ffff800086ab1630
x17: 0000000000000000 x16: 0000000000000000 x15: 0000000000000001
x14: 1ffff00011302eb8 x13: 0000000000000000 x12: 0000000000000000
x11: 0000000000000000 x10: 0000000000000000 x9 : 64a26b65474d2a00
x8 : 64a26b65474d2a00 x7 : 0000000000000001 x6 : 0000000000000001
x5 : ffff800089817438 x4 : ffff800086ac99e0 x3 : ffff800080f19e8c
x2 : 0000000000000001 x1 : 0000000100000000 x0 : 000000000000002c
Call trace:
 fortify_panic+0x1c/0x20 lib/string_helpers.c:1030
 _Z16__fortify_strlenPKcU25pass_dynamic_object_size1 include/linux/fortify-string.h:217 [inline]
 unix_bind_bsd net/unix/af_unix.c:1212 [inline]
 unix_bind+0xba8/0xc58 net/unix/af_unix.c:1326
 __sys_bind+0x1ac/0x248 net/socket.c:1792
 __do_sys_bind net/socket.c:1803 [inline]
 __se_sys_bind net/socket.c:1801 [inline]
 __arm64_sys_bind+0x7c/0x94 net/socket.c:1801
 __invoke_syscall arch/arm64/kernel/syscall.c:38 [inline]
 invoke_syscall+0x98/0x2c0 arch/arm64/kernel/syscall.c:52
 el0_svc_common+0x134/0x240 arch/arm64/kernel/syscall.c:139
 do_el0_svc+0x64/0x198 arch/arm64/kernel/syscall.c:188
 el0_svc+0x2c/0x7c arch/arm64/kernel/entry-common.c:647
 el0t_64_sync_handler+0x84/0xfc arch/arm64/kernel/entry-common.c:665
 el0t_64_sync+0x190/0x194 arch/arm64/kernel/entry.S:591
Code: aa0003e1 d0000e80 91030000 97ffc91a (d4210000)

Fixes: df8fc4e9

 ("kbuild: Enable -fstrict-flex-arrays=3")
Reported-by: syzkaller <syzkaller@googlegroups.com>
Suggested-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://lore.kernel.org/r/20230724213425.22920-2-kuniyu@amazon.com


Reviewed-by: Simon Horman <simon.horman@corigine.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

06d4c8a8

macvlan: add forgotten nla_policy for IFLA_MACVLAN_BC_CUTOFF · 55cef78c

Lin Ma authored Jul 23, 2023

The previous commit 954d1fa1 ("macvlan: Add netlink attribute for
broadcast cutoff") added one additional attribute named
IFLA_MACVLAN_BC_CUTOFF to allow broadcast cutfoff.

However, it forgot to describe the nla_policy at macvlan_policy
(drivers/net/macvlan.c). Hence, this suppose NLA_S32 (4 bytes) integer
can be faked as empty (0 bytes) by a malicious user, which could leads
to OOB in heap just like CVE-2023-3773.

To fix it, this commit just completes the nla_policy description for
IFLA_MACVLAN_BC_CUTOFF. This enforces the length check and avoids the
potential OOB read.

Fixes: 954d1fa1

 ("macvlan: Add netlink attribute for broadcast cutoff")
Signed-off-by: Lin Ma <linma@zju.edu.cn>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Link: https://lore.kernel.org/r/20230723080205.3715164-1-linma@zju.edu.cn


Signed-off-by: Jakub Kicinski <kuba@kernel.org>

55cef78c

Jul 25, 2023

net: stmmac: Apply redundant write work around on 4.xx too · 284779db

Vincent Whitchurch authored Jul 21, 2023

commit a3a57bf0 ("net: stmmac: work
around sporadic tx issue on link-up") worked around a problem with TX
sometimes not working after a link-up by avoiding a redundant write to
MAC_CTRL_REG (aka GMAC_CONFIG), since the IP appeared to have problems
with handling multiple writes to that register in some cases.

That commit however only added the work around to dwmac_lib.c (apart
from the common code in stmmac_main.c), but my systems with version
4.21a of the IP exhibit the same problem, so add the work around to
dwmac4_lib.c too.

Fixes: a3a57bf0

 ("net: stmmac: work around sporadic tx issue on link-up")
Signed-off-by: Vincent Whitchurch <vincent.whitchurch@axis.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Link: https://lore.kernel.org/r/20230721-stmmac-tx-workaround-v1-1-9411cbd5ee07@axis.com


Signed-off-by: Paolo Abeni <pabeni@redhat.com>

284779db

octeontx2-af: Fix hash extraction enable configuration · 4e62c99d

Suman Ghosh authored Jul 21, 2023

As of today, hash extraction support is enabled for all the silicons.
Because of which we are facing initialization issues when the silicon
does not support hash extraction. During creation of the hardware
parsing table for IPv6 address, we need to consider if hash extraction
is enabled then extract only 32 bit, otherwise 128 bit needs to be
extracted. This patch fixes the issue and configures the hardware parser
based on the availability of the feature.

Fixes: a95ab935

 ("octeontx2-af: Use hashed field in MCAM key")
Signed-off-by: Suman Ghosh <sumang@marvell.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Link: https://lore.kernel.org/r/20230721061222.2632521-1-sumang@marvell.com


Signed-off-by: Paolo Abeni <pabeni@redhat.com>

4e62c99d

Merge branch 'fix-up-dev-flags-when-add-p2p-down-link' · 34192a2f

Paolo Abeni authored Jul 25, 2023

Hangbin Liu says:

====================
Fix up dev flags when add P2P down link

When adding p2p interfaces to bond/team. The POINTOPOINT, NOARP flags are
not inherit to up devices. Which will trigger IPv6 DAD. Since there is
no ethernet MAC address for P2P devices. This will cause unexpected DAD
failures.
====================

Link: https://lore.kernel.org/r/20230721040356.3591174-1-liuhangbin@gmail.com


Signed-off-by: Paolo Abeni <pabeni@redhat.com>

34192a2f

team: reset team's flags when down link is P2P device · fa532bee

Hangbin Liu authored Jul 21, 2023



When adding a point to point downlink to team device, we neglected to reset
the team's flags, which were still using flags like BROADCAST and
MULTICAST. Consequently, this would initiate ARP/DAD for P2P downlink
interfaces, such as when adding a GRE device to team device. Fix this by
remove multicast/broadcast flags and add p2p and noarp flags.

After removing the none ethernet interface and adding an ethernet interface
to team, we need to reset team interface flags. Unlike bonding interface,
team do not need restore IFF_MASTER, IFF_SLAVE flags.

Reported-by: Liang Li <liali@redhat.com>
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=2221438
Fixes: 1d76efe1

 ("team: add support for non-ethernet devices")
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

fa532bee

bonding: reset bond's flags when down link is P2P device · da19a2b9

Hangbin Liu authored Jul 21, 2023



When adding a point to point downlink to the bond, we neglected to reset
the bond's flags, which were still using flags like BROADCAST and
MULTICAST. Consequently, this would initiate ARP/DAD for P2P downlink
interfaces, such as when adding a GRE device to the bonding.

To address this issue, let's reset the bond's flags for P2P interfaces.

Before fix:
7: gre0@NONE: <POINTOPOINT,NOARP,SLAVE,UP,LOWER_UP> mtu 1500 qdisc noqueue master bond0 state UNKNOWN group default qlen 1000
    link/gre6 2006:70:10::1 peer 2006:70:10::2 permaddr 167f:18:f188::
8: bond0: <BROADCAST,MULTICAST,MASTER,UP,LOWER_UP> mtu 1500 qdisc noqueue state UP group default qlen 1000
    link/gre6 2006:70:10::1 brd 2006:70:10::2
    inet6 fe80::200:ff:fe00:0/64 scope link
       valid_lft forever preferred_lft forever

After fix:
7: gre0@NONE: <POINTOPOINT,NOARP,SLAVE,UP,LOWER_UP> mtu 1500 qdisc noqueue master bond2 state UNKNOWN group default qlen 1000
    link/gre6 2006:70:10::1 peer 2006:70:10::2 permaddr c29e:557a:e9d9::
8: bond0: <POINTOPOINT,NOARP,MASTER,UP,LOWER_UP> mtu 1500 qdisc noqueue state UP group default qlen 1000
    link/gre6 2006:70:10::1 peer 2006:70:10::2
    inet6 fe80::1/64 scope link
       valid_lft forever preferred_lft forever

Reported-by: Liang Li <liali@redhat.com>
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=2221438
Fixes: 872254dd

 ("net/bonding: Enable bonding to enslave non ARPHRD_ETHER")
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

da19a2b9

Merge branch '40GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue · f0291103

Jakub Kicinski authored Jul 24, 2023

Tony Nguyen says:

====================
Intel Wired LAN Driver Updates 2023-07-21 (i40e, iavf)

This series contains updates to i40e and iavf drivers.

Wang Ming corrects an error check on i40e.

Jake unlocks crit_lock on allocation failure to prevent deadlock and
stops re-enabling of interrupts when it's not intended for iavf.

* '40GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue:
  iavf: check for removal state before IAVF_FLAG_PF_COMMS_FAILED
  iavf: fix potential deadlock on allocation failure
  i40e: Fix an NULL vs IS_ERR() bug for debugfs_create_dir()
====================

Link: https://lore.kernel.org/r/20230721155812.1292752-1-anthony.l.nguyen@intel.com


Signed-off-by: Jakub Kicinski <kuba@kernel.org>

f0291103

Merge tag 'linux-can-fixes-for-6.5-20230724' of... · ac2a7b13

Jakub Kicinski authored Jul 24, 2023

Merge tag 'linux-can-fixes-for-6.5-20230724' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can

Marc Kleine-Budde says:

====================
pull-request: can 2023-07-24

The first patch is by me and adds a missing set of CAN state to
CAN_STATE_STOPPED on close in the gs_usb driver.

The last patch is by Eric Dumazet and fixes a lockdep issue in the CAN
raw protocol.

* tag 'linux-can-fixes-for-6.5-20230724' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can:
  can: raw: fix lockdep issue in raw_release()
  can: gs_usb: gs_can_close(): add missing set of CAN state to CAN_STATE_STOPPED
====================

Link: https://lore.kernel.org/r/20230724150141.766047-1-mkl@pengutronix.de


Signed-off-by: Jakub Kicinski <kuba@kernel.org>

ac2a7b13

ice: Fix memory management in ice_ethtool_fdir.c · a3336056

Jedrzej Jagielski authored Jul 21, 2023



Fix ethtool FDIR logic to not use memory after its release.
In the ice_ethtool_fdir.c file there are 2 spots where code can
refer to pointers which may be missing.

In the ice_cfg_fdir_xtrct_seq() function seg may be freed but
even then may be still used by memcpy(&tun_seg[1], seg, sizeof(*seg)).

In the ice_add_fdir_ethtool() function struct ice_fdir_fltr *input
may first fail to be added via ice_fdir_update_list_entry() but then
may be deleted by ice_fdir_update_list_entry.

Terminate in both cases when the returned value of the previous
operation is other than 0, free memory and don't use it anymore.

Reported-by: Michal Schmidt <mschmidt@redhat.com>
Link: https://bugzilla.redhat.com/show_bug.cgi?id=2208423
Fixes: cac2a27c

 ("ice: Support IPv4 Flow Director filters")
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Jedrzej Jagielski <jedrzej.jagielski@intel.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Link: https://lore.kernel.org/r/20230721155854.1292805-1-anthony.l.nguyen@intel.com


Signed-off-by: Jakub Kicinski <kuba@kernel.org>

a3336056

tcp: Reduce chance of collisions in inet6_hashfn(). · d11b0df7

Stewart Smith authored Jul 21, 2023

For both IPv4 and IPv6 incoming TCP connections are tracked in a hash
table with a hash over the source & destination addresses and ports.
However, the IPv6 hash is insufficient and can lead to a high rate of
collisions.

The IPv6 hash used an XOR to fit everything into the 96 bits for the
fast jenkins hash, meaning it is possible for an external entity to
ensure the hash collides, thus falling back to a linear search in the
bucket, which is slow.

We take the approach of hash the full length of IPv6 address in
__ipv6_addr_jhash() so that all users can benefit from a more secure
version.

While this may look like it adds overhead, the reality of modern CPUs
means that this is unmeasurable in real world scenarios.

In simulating with llvm-mca, the increase in cycles for the hashing
code was ~16 cycles on Skylake (from a base of ~155), and an extra ~9
on Nehalem (base of ~173).

In commit dd6d2910 ("netfilter: conntrack: switch to siphash")
netfilter switched from a jenkins hash to a siphash, but even the faster
hsiphash is a more significant overhead (~20-30%) in some preliminary
testing.  So, in this patch, we keep to the more conservative approach to
ensure we don't add much overhead per SYN.

In testing, this results in a consistently even spread across the
connection buckets.  In both testing and real-world scenarios, we have
not found any measurable performance impact.

Fixes: 08dcdbf6

 ("ipv6: use a stronger hash for tcp")
Signed-off-by: Stewart Smith <trawets@amazon.com>
Signed-off-by: Samuel Mendoza-Jonas <samjonas@amazon.com>
Suggested-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20230721222410.17914-1-kuniyu@amazon.com


Signed-off-by: Jakub Kicinski <kuba@kernel.org>

d11b0df7

net: fec: avoid tx queue timeout when XDP is enabled · bb7a0156

Wei Fang authored Jul 21, 2023

According to the implementation of XDP of FEC driver, the XDP path
shares the transmit queues with the kernel network stack, so it is
possible to lead to a tx timeout event when XDP uses the tx queue
pretty much exclusively. And this event will cause the reset of the
FEC hardware.
To avoid timeout in this case, we use the txq_trans_cond_update()
interface to update txq->trans_start to jiffies so that watchdog
won't generate a transmit timeout warning.

Fixes: 6d6b39f1

 ("net: fec: add initial XDP support")
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Link: https://lore.kernel.org/r/20230721083559.2857312-1-wei.fang@nxp.com


Signed-off-by: Jakub Kicinski <kuba@kernel.org>

bb7a0156

ipv6 addrconf: fix bug where deleting a mngtmpaddr can create a new temporary address · 69172f0b

Maciej Żenczykowski authored Jul 20, 2023

currently on 6.4 net/main:

  # ip link add dummy1 type dummy
  # echo 1 > /proc/sys/net/ipv6/conf/dummy1/use_tempaddr
  # ip link set dummy1 up
  # ip -6 addr add 2000::1/64 mngtmpaddr dev dummy1
  # ip -6 addr show dev dummy1

  11: dummy1: <BROADCAST,NOARP,UP,LOWER_UP> mtu 1500 qdisc noqueue state UNKNOWN group default qlen 1000
      inet6 2000::44f3:581c:8ca:3983/64 scope global temporary dynamic
         valid_lft 604800sec preferred_lft 86172sec
      inet6 2000::1/64 scope global mngtmpaddr
         valid_lft forever preferred_lft forever
      inet6 fe80::e8a8:a6ff:fed5:56d4/64 scope link
         valid_lft forever preferred_lft forever

  # ip -6 addr del 2000::44f3:581c:8ca:3983/64 dev dummy1

  (can wait a few seconds if you want to, the above delete isn't [directly] the problem)

  # ip -6 addr show dev dummy1

  11: dummy1: <BROADCAST,NOARP,UP,LOWER_UP> mtu 1500 qdisc noqueue state UNKNOWN group default qlen 1000
      inet6 2000::1/64 scope global mngtmpaddr
         valid_lft forever preferred_lft forever
      inet6 fe80::e8a8:a6ff:fed5:56d4/64 scope link
         valid_lft forever preferred_lft forever

  # ip -6 addr del 2000::1/64 mngtmpaddr dev dummy1
  # ip -6 addr show dev dummy1

  11: dummy1: <BROADCAST,NOARP,UP,LOWER_UP> mtu 1500 qdisc noqueue state UNKNOWN group default qlen 1000
      inet6 2000::81c9:56b7:f51a:b98f/64 scope global temporary dynamic
         valid_lft 604797sec preferred_lft 86169sec
      inet6 fe80::e8a8:a6ff:fed5:56d4/64 scope link
         valid_lft forever preferred_lft forever

This patch prevents this new 'global temporary dynamic' address from being
created by the deletion of the related (same subnet prefix) 'mngtmpaddr'
(which is triggered by there already being no temporary addresses).

Cc: Jiri Pirko <jiri@resnulli.us>
Fixes: 53bd6749

 ("ipv6 addrconf: introduce IFA_F_MANAGETEMPADDR to tell kernel to manage temporary addresses")
Reported-by: Xiao Ma <xiaom@google.com>
Signed-off-by: Maciej Żenczykowski <maze@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/20230720160022.1887942-1-maze@google.com


Signed-off-by: Jakub Kicinski <kuba@kernel.org>

69172f0b

ethernet: atheros: fix return value check in atl1e_tso_csum() · 69a184f7

Yuanjun Gong authored Jul 20, 2023

in atl1e_tso_csum, it should check the return value of pskb_trim(),
and return an error code if an unexpected value is returned
by pskb_trim().

Fixes: a6a53252

 ("atl1e: Atheros L1E Gigabit Ethernet driver")
Signed-off-by: Yuanjun Gong <ruc_gongyuanjun@163.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Link: https://lore.kernel.org/r/20230720144219.39285-1-ruc_gongyuanjun@163.com


Signed-off-by: Jakub Kicinski <kuba@kernel.org>

69a184f7

atheros: fix return value check in atl1_tso() · ed96824b

Yuanjun Gong authored Jul 22, 2023

in atl1_tso(), it should check the return value of pskb_trim(),
and return an error code if an unexpected value is returned
by pskb_trim().

Fixes: 401c0aab

 ("atl1: simplify tx packet descriptor")
Signed-off-by: Yuanjun Gong <ruc_gongyuanjun@163.com>
Link: https://lore.kernel.org/r/20230722142511.12448-1-ruc_gongyuanjun@163.com


Signed-off-by: Jakub Kicinski <kuba@kernel.org>

ed96824b

Jul 24, 2023

Merge branch 'vxlan-gro-fixes' · 22117b3a

David S. Miller authored Jul 24, 2023



Jiri Benc says:

====================
vxlan: fix GRO with VXLAN-GPE

The first patch generalizes code for the second patch, which is a fix for
broken VXLAN-GPE GRO. Thanks to Paolo for noticing the bug.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

22117b3a